aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-05-02qtest: Move accel code to accel/qtest.cEduardo Habkost
QTest has two parts: the server (-qtest) and the accelerator (-machine accel=qtest). The accelerator depends on CONFIG_POSIX due to its usage of sigwait(), but the server doesn't. Move the accel code to accel/qtest.c. Later we will disable compilation of accel/qtest.c on non-POSIX systems. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Message-Id: <20190422210448.2488-2-ehabkost@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> [thuth: added fixup for MAINTAINERS file] Signed-off-by: Thomas Huth <thuth@redhat.com>
2019-05-02gitlab-ci.yml: Test the TCG interpreter in a CI pipelineThomas Huth
So far we do not have any test coverage for TCI (the TCG interpreter) yet. Thus let's add a CI pipeline that runs at least some basic TCG tests with a TCI build, to make sure that there are no further regressions. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190410123550.2362-1-thuth@redhat.com>
2019-05-02Merge remote-tracking branch 'remotes/jnsnow/tags/bitmaps-pull-request' into ↵Peter Maydell
staging Pull request # gpg: Signature made Wed 01 May 2019 21:24:16 BST # gpg: using RSA key F9B7ABDBBCACDF95BE76CBD07DEF8106AAFC390E # gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" [full] # Primary key fingerprint: FAEB 9711 A12C F475 812F 18F2 88A9 064D 1835 61EB # Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76 CBD0 7DEF 8106 AAFC 390E * remotes/jnsnow/tags/bitmaps-pull-request: docs/interop/bitmaps: rewrite and modernize doc Makefile: add nit-picky mode to sphinx-build Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-02Merge remote-tracking branch 'remotes/dgilbert/tags/pull-hmp-20190501' into ↵Peter Maydell
staging HMP pull New gva2gpa command delvm now uses hmp_handle_error so gets Error: prefix in messages # gpg: Signature made Wed 01 May 2019 11:57:43 BST # gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7 # gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full] # Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7 * remotes/dgilbert/tags/pull-hmp-20190501: hmp: gva2gpa debug command hmp: delvm: use hmp_handle_error Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-05-01docs/interop/bitmaps: rewrite and modernize docJohn Snow
This just about rewrites the entirety of the bitmaps.rst document to make it consistent with the 4.0 release. I have added new features seen in the 4.0 release, as well as tried to clarify some points that keep coming up when discussing this feature both in-house and upstream. It does not yet cover pull backups or migration details, but I intend to keep extending this document to cover those cases. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-id: 20190426221528.30293-3-jsnow@redhat.com [Adjusted commit message. --js] Signed-off-by: John Snow <jsnow@redhat.com>
2019-05-01Makefile: add nit-picky mode to sphinx-buildJohn Snow
If we add references that don't resolve (or accidentally remove them), it will be helpful to have warning messages alerting us to that. Further, turn those warnings into errors so we can be alerted to these problems sooner rather than later. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-id: 20190426221528.30293-2-jsnow@redhat.com [adjusted commit message. --js] Signed-off-by: John Snow <jsnow@redhat.com>
2019-05-01hmp: gva2gpa debug commandDr. David Alan Gilbert
Add a gva2gpa command purely for debug which performs address translation on the gva, the existing gpa2hva command can then also be used to find it in the qemu userspace; e.g. (qemu) info registers .... RSP=ffffffff81c03e98 .... (qemu) gva2gpa 0xffffffff81c03e98 gpa: 0x1c03e98 (qemu) gpa2hva 0x1c03e98 Host virtual address for 0x1c03e98 (pc.ram) is 0x7f0599a03e98 (qemu) x/10x 0xffffffff81c03e98 ffffffff81c03e98: 0x81c03eb8 0xffffffff 0x8101ea3f 0xffffffff ffffffff81c03ea8: 0x81d27b00 0xffffffff 0x00000000 0x00000000 ffffffff81c03eb8: 0x81c03ec8 0xffffffff gdb -p ...qemu... (gdb) x/10x 0x7f0599a03e98 0x7f0599a03e98: 0x81c03eb8 0xffffffff 0x8101ea3f 0xffffffff 0x7f0599a03ea8: 0x81d27b00 0xffffffff 0x00000000 0x00000000 0x7f0599a03eb8: 0x81c03ec8 0xffffffff Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20190412152652.827-1-dgilbert@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-05-01hmp: delvm: use hmp_handle_errorCole Robinson
This gives us the consistent 'Error:' prefix added in 66363e9a43f, which helps users like libvirt who still need to scrape hmp error messages to detect failure. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Cole Robinson <crobinso@redhat.com> Message-Id: <984634226fa14316641f31f84e7dd0bb770bd94c.1556141033.git.crobinso@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-04-30Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell
Block layer patches: - iotests: Fix output of qemu-io related tests - Don't ignore bdrv_set_aio_context() for nodes with bs->drv = NUL - vmdk: Set vmdk parent backing_format to vmdk - qcow2: Preallocation fixes (especially for external data files) - Add linear-buffer-based APIs (as wrappers around qiov-based ones) - Various code cleanups and small corner case fixes # gpg: Signature made Tue 30 Apr 2019 16:35:09 BST # gpg: using RSA key 7F09B272C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full] # Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6 * remotes/kevin/tags/for-upstream: (27 commits) block/qed: add missed coroutine_fn markers iotests: Check that images are in read-only mode after block-commit commit: Make base read-only if there is an early failure qemu-img: use buffer-based io block/stream: use buffer-based io block/commit: use buffer-based io block/backup: use buffer-based io block/parallels: use buffer-based io block/qed: use buffer-based io block/qcow: use buffer-based io block/qcow2: use buffer-based io block: introduce byte-based io helpers qcow2: Fix error handling in the compression code qcow2: Fix qcow2_make_empty() with external data file qemu-img: Make create hint at protocol options iotests: Perform the correct test in 082 qcow2: Fix full preallocation with external data file qcow2: Add errp to preallocate_co() qcow2: Avoid COW during metadata preallocation qemu-img: Saner printing of large file sizes ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-04-30block/qed: add missed coroutine_fn markersVladimir Sementsov-Ogievskiy
qed_read_table and qed_write_table use coroutine-only interfaces but are not marked coroutine_fn. Happily, they are called only from coroutine context, so we only need to add missed markers. Reported-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-04-30iotests: Check that images are in read-only mode after block-commitAlberto Garcia
This tests the fix from the previous patch. Signed-off-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-04-30commit: Make base read-only if there is an early failureAlberto Garcia
You can reproduce this by passing an invalid filter-node-name (like "1234") to block-commit. In this case the base image is put in read-write mode but is never reset back to read-only. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-04-30qemu-img: use buffer-based ioVladimir Sementsov-Ogievskiy
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-04-30block/stream: use buffer-based ioVladimir Sementsov-Ogievskiy
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-04-30block/commit: use buffer-based ioVladimir Sementsov-Ogievskiy
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-04-30block/backup: use buffer-based ioVladimir Sementsov-Ogievskiy
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-04-30block/parallels: use buffer-based ioVladimir Sementsov-Ogievskiy
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-04-30block/qed: use buffer-based ioVladimir Sementsov-Ogievskiy
Move to _co_ versions of io functions qed_read_table() and qed_write_table(), as we use qemu_co_mutex_unlock() anyway. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-04-30block/qcow: use buffer-based ioVladimir Sementsov-Ogievskiy
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-04-30block/qcow2: use buffer-based ioVladimir Sementsov-Ogievskiy
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-04-30block: introduce byte-based io helpersVladimir Sementsov-Ogievskiy
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-04-30qcow2: Fix error handling in the compression codeAlberto Garcia
This patch fixes a few things in the way error codes are handled in the qcow2 compression code: a) qcow2_co_pwritev_compressed() expects qcow2_co_compress() to only return -1 or -2 on failure, but this is not correct. Since the change from qcow2_compress() to qcow2_co_compress() in commit ceb029cd6feccf9f7607 the new code can also return -EINVAL (although there does not seem to exist any code path that would cause that error in the current implementation). b) -1 and -2 are ad-hoc error codes defined in qcow2_compress(). This patch replaces them with standard constants from errno.h. c) Both qcow2_compress() and qcow2_co_do_compress() return a negative value on failure, but qcow2_co_pwritev_compressed() stores the value in an unsigned data type. Signed-off-by: Alberto Garcia <berto@igalia.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-04-30qcow2: Fix qcow2_make_empty() with external data fileKevin Wolf
make_completely_empty() is an optimisated path for bdrv_make_empty() where completely new metadata is created inside the image file instead of going through all clusters and discarding them. For an external data file, however, we actually need to do discard operations on the data file; just overwriting the qcow2 file doesn't get rid of the data. The necessary slow path with an explicit discard operation already exists for other cases. Use it for external data files, too. Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2019-04-30qemu-img: Make create hint at protocol optionsMax Reitz
qemu-img create allows giving just a format and "-o help" to get a list of the options supported by that format. Users may not realize that the protocol level may offer even more options, which they only get to see by specifying a filename. This patch adds a note to hint at that fact. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-04-30iotests: Perform the correct test in 082Max Reitz
In the "amend" section of 082, we perform a single "convert" test (namely "convert -o help"). That does not make sense, especially because we have done exactly that "convert" test earlier in 082 already. Replacing "convert" by "amend" yields an error, which is correct because there is no point in "amend" having a default format. The user has to either specify the format, or give a file for qemu-img to probe. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-04-30qcow2: Fix full preallocation with external data fileKevin Wolf
preallocate_co() already gave the data file the full size without forwarding the requested preallocation mode to the protocol. When bdrv_co_truncate() was called later with the preallocation mode, the file didn't actually grow any more, so the data file stayed unallocated even if full preallocation was requested. Pass the right preallocation mode to preallocate_co() and remove the second bdrv_co_truncate() to fix this. As a side effect, the ugly one-byte write in preallocate_co() is replaced with a truncate call, now leaving the last block unallocated on the protocol level as it should be. Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2019-04-30qcow2: Add errp to preallocate_co()Kevin Wolf
We'll add a bdrv_co_truncate() call in the next patch which can return an Error that we don't want to discard. So add an errp parameter to preallocate_co(). Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2019-04-30qcow2: Avoid COW during metadata preallocationKevin Wolf
Limiting the allocation to INT_MAX bytes isn't particularly clever because it means that the final cluster will be a partial cluster which will be completed through a COW operation. This results in unnecessary data read and write requests which lead to an unwanted non-sparse filesystem block for metadata preallocation. Align the maximum allocation size down to the cluster size to avoid this situation. Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2019-04-30qemu-img: Saner printing of large file sizesEric Blake
Disk sizes close to INT64_MAX cause overflow, for some pretty ridiculous output: $ ./nbdkit -U - memory size=$((2**63 - 512)) --run 'qemu-img info $nbd' image: nbd+unix://?socket=/tmp/nbdkitHSAzNz/socket file format: raw virtual size: -8388607T (9223372036854775296 bytes) disk size: unavailable But there's no reason to have two separate implementations of integer to human-readable abbreviation, where one has overflow and stops at 'T', while the other avoids overflow and goes all the way to 'E'. With this patch, the output now claims 8EiB instead of -8388607T, which really is the correct rounding of largest file size supported by qemu (we could go 511 bytes larger if we used byte-accurate sizing instead of rounding up to the next sector boundary, but that wouldn't change the human-readable result). Quite a few iotests need updates to expected output to match. Reported-by: Richard W.M. Jones <rjones@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com> Tested-by: Richard W.M. Jones <rjones@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Tested-by: Max Reitz <mreitz@redhat.com>
2019-04-30cutils: Fix size_to_str() on 32-bit platformsEric Blake
When extracting a human-readable size formatter, we changed 'uint64_t div' pre-patch to 'unsigned long div' post-patch. Which breaks on 32-bit platforms, resulting in 'inf' instead of intended values larger than 999GB. Fixes: 22951aaa CC: qemu-stable@nongnu.org Reported-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-04-30block/vhdx: Use IEC binary prefixes for size constantsStefano Garzarella
Using IEC binary prefixes in order to make the code more readable, with the exception of DEFAULT_LOG_SIZE because it's passed to stringify(). Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-04-30block/vhdx: Remove redundant IEC binary prefixes definitionStefano Garzarella
IEC binary prefixes are already defined in "qemu/units.h", so we can remove redundant definitions in "block/vhdx.h". Signed-off-by: Stefano Garzarella <sgarzare@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-04-30vmdk: Set vmdk parent backing_format to vmdkSam Eiderman
Commit b69864e5a ("vmdk: Support version=3 in VMDK descriptor files") fixed the probe function to correctly guess vmdk descriptors with version=3. This solves the issue where vmdk snapshot with parent vmdk descriptor containing "version=3" would be treated as raw instead vmdk. In the future case where a new vmdk version is introduced, we will again experience this issue, even if the user will provide "-f vmdk" it will only apply to the tip image and not to the underlying "misprobed" parent image. The code in vmdk.c already assumes that the backing file of vmdk must be vmdk (see vmdk_is_cid_valid which returns 0 if backing file is not vmdk). So let's make it official by supplying the backing_format as vmdk. Reviewed-by: Mark Kanda <mark.kanda@oracle.com> Reviewed-By: Liran Alon <liran.alon@oracle.com> Reviewed-by: Arbel Moshe <arbel.moshe@oracle.com> Signed-off-by: Shmuel Eiderman <shmuel.eiderman@oracle.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Fam Zheng <fam@euphon.net> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-04-30vpc: unlock Coroutine lock to make IO submit ConcurrentlyZhengui li
Concurrent IO becomes serial IO because of the qemu Coroutine lock, which reduce IO performance severely. So unlock Coroutine lock before bdrv_co_pwritev and bdrv_co_preadv to fix it. Signed-off-by: Zhengui li <lizhengui@huawei.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-04-30block: Fix AioContext switch for bs->drv == NULLKevin Wolf
Even for block nodes with bs->drv == NULL, we can't just ignore a bdrv_set_aio_context() call. Leaving the node in its old context can mean that it's still in an iothread context in bdrv_close_all() during shutdown, resulting in an attempted unlock of the AioContext lock which we don't hold. This is an example stack trace of a related crash: #0 0x00007ffff59da57f in raise () at /lib64/libc.so.6 #1 0x00007ffff59c4895 in abort () at /lib64/libc.so.6 #2 0x0000555555b97b1e in error_exit (err=<optimized out>, msg=msg@entry=0x555555d386d0 <__func__.19059> "qemu_mutex_unlock_impl") at util/qemu-thread-posix.c:36 #3 0x0000555555b97f7f in qemu_mutex_unlock_impl (mutex=mutex@entry=0x5555568002f0, file=file@entry=0x555555d378df "util/async.c", line=line@entry=507) at util/qemu-thread-posix.c:97 #4 0x0000555555b92f55 in aio_context_release (ctx=ctx@entry=0x555556800290) at util/async.c:507 #5 0x0000555555b05cf8 in bdrv_prwv_co (child=child@entry=0x7fffc80012f0, offset=offset@entry=131072, qiov=qiov@entry=0x7fffffffd4f0, is_write=is_write@entry=true, flags=flags@entry=0) at block/io.c:833 #6 0x0000555555b060a9 in bdrv_pwritev (qiov=0x7fffffffd4f0, offset=131072, child=0x7fffc80012f0) at block/io.c:990 #7 0x0000555555b060a9 in bdrv_pwrite (child=0x7fffc80012f0, offset=131072, buf=<optimized out>, bytes=<optimized out>) at block/io.c:990 #8 0x0000555555ae172b in qcow2_cache_entry_flush (bs=bs@entry=0x555556810680, c=c@entry=0x5555568cc740, i=i@entry=0) at block/qcow2-cache.c:51 #9 0x0000555555ae18dd in qcow2_cache_write (bs=bs@entry=0x555556810680, c=0x5555568cc740) at block/qcow2-cache.c:248 #10 0x0000555555ae15de in qcow2_cache_flush (bs=0x555556810680, c=<optimized out>) at block/qcow2-cache.c:259 #11 0x0000555555ae16b1 in qcow2_cache_flush_dependency (c=0x5555568a1700, c=0x5555568a1700, bs=0x555556810680) at block/qcow2-cache.c:194 #12 0x0000555555ae16b1 in qcow2_cache_entry_flush (bs=bs@entry=0x555556810680, c=c@entry=0x5555568a1700, i=i@entry=0) at block/qcow2-cache.c:194 #13 0x0000555555ae18dd in qcow2_cache_write (bs=bs@entry=0x555556810680, c=0x5555568a1700) at block/qcow2-cache.c:248 #14 0x0000555555ae15de in qcow2_cache_flush (bs=bs@entry=0x555556810680, c=<optimized out>) at block/qcow2-cache.c:259 #15 0x0000555555ad242c in qcow2_inactivate (bs=bs@entry=0x555556810680) at block/qcow2.c:2124 #16 0x0000555555ad2590 in qcow2_close (bs=0x555556810680) at block/qcow2.c:2153 #17 0x0000555555ab0c62 in bdrv_close (bs=0x555556810680) at block.c:3358 #18 0x0000555555ab0c62 in bdrv_delete (bs=0x555556810680) at block.c:3542 #19 0x0000555555ab0c62 in bdrv_unref (bs=0x555556810680) at block.c:4598 #20 0x0000555555af4d72 in blk_remove_bs (blk=blk@entry=0x5555568103d0) at block/block-backend.c:785 #21 0x0000555555af4dbb in blk_remove_all_bs () at block/block-backend.c:483 #22 0x0000555555aae02f in bdrv_close_all () at block.c:3412 #23 0x00005555557f9796 in main (argc=<optimized out>, argv=<optimized out>, envp=<optimized out>) at vl.c:4776 The reproducer I used is a qcow2 image on gluster volume, where the virtual disk size (4 GB) is larger than the gluster volume size (64M), so we can easily trigger an ENOSPC. This backend is assigned to a virtio-blk device using an iothread, and then from the guest a 'dd if=/dev/zero of=/dev/vda bs=1G count=1' causes the VM to stop because of an I/O error. qemu_gluster_co_flush_to_disk() sets bs->drv = NULL on error, so when virtio-blk stops the dataplane, the block nodes stay in the iothread AioContext. A 'quit' monitor command issued from this paused state crashes the process. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=1631227 Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
2019-04-30tests/qemu-iotests: Fix output of qemu-io related testsThomas Huth
One of the recent commits changed the way qemu-io prints out its errors and warnings - they are now prefixed with the program name. We've got to adapt the iotests accordingly to prevent that they are failing. Fixes: 99e98d7c9fc1a1639fad ("qemu-io: Use error_[gs]et_progname()") Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2019-04-30Merge remote-tracking branch 'remotes/rth/tags/pull-hppa-20190429' into stagingPeter Maydell
Implement fast tlb insert insns. Fix data tlb exception for pa 1.1. # gpg: Signature made Mon 29 Apr 2019 22:54:08 BST # gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F # gpg: issuer "richard.henderson@linaro.org" # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full] # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * remotes/rth/tags/pull-hppa-20190429: target/hppa: Always return EXCP_DMAR for protection id trap target/hppa: Implement Fast TLB Insert instructions Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-04-29target/hppa: Always return EXCP_DMAR for protection id trapNick Hudson
The EXCP_DMP trap is considered legacy. "In PA-RISC 1.1 (Second Edition) and later revisions, processors must use traps 26, 27,and 28 which provide equivalent functionality" Signed-off-by: Nick Hudson <skrll@netbsd.org> Message-Id: <20190423063621.8203-3-nick.hudson@gmx.co.uk> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-04-29target/hppa: Implement Fast TLB Insert instructionsNick Hudson
These instructions are present on pcxl and pcxl2 machines, and are used by NetBSD and OpenBSD. See https://parisc.wiki.kernel.org/images-parisc/a/a9/Pcxl2_ers.pdf page 13-9 (195/206) Signed-off-by: Nick Hudson <skrll@netbsd.org> Message-Id: <20190423063621.8203-2-nick.hudson@gmx.co.uk> [rth: Use extending loads, locally managed temporaries.] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2019-04-29Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' ↵Peter Maydell
into staging Pull request # gpg: Signature made Mon 29 Apr 2019 17:10:40 BST # gpg: using RSA key 9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" [full] # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" [full] # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/tracing-pull-request: trace: fix runstate tracing Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-04-29Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20190429' into staging target-arm queue: * remove "bag of random stuff" hw/devices.h header * implement FPU for Cortex-M and enable it for Cortex-M4 and -M33 * hw/dma: Compile the bcm2835_dma device as common object * configure: Remove --source-path option * hw/ssi/xilinx_spips: Avoid variable length array * hw/arm/smmuv3: Remove SMMUNotifierNode # gpg: Signature made Mon 29 Apr 2019 17:58:57 BST # gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE # gpg: issuer "peter.maydell@linaro.org" # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate] # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate] # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20190429: (42 commits) hw/devices: Move SMSC 91C111 declaration into a new header hw/net/lan9118: Export TYPE_LAN9118 and use it instead of hardcoded string hw/net/ne2000-isa: Add guards to the header hw/devices: Move LAN9118 declarations into a new header hw/devices: Move TI touchscreen declarations into a new header hw/devices: Move Gamepad declarations into a new header hw/devices: Move CBus declarations into a new header hw/devices: Move Blizzard declarations into a new header hw/devices: Move TC6393XB declarations into a new header hw/display/tc6393xb: Remove unused functions hw/arm/nseries: Use TYPE_TMP105 instead of hardcoded string hw/arm/aspeed: Use TYPE_TMP105/TYPE_PCA9552 instead of hardcoded string hw/dma: Compile the bcm2835_dma device as common object target/arm: Enable FPU for Cortex-M4 and Cortex-M33 target/arm: Implement VLLDM for v7M CPUs with an FPU target/arm: Implement VLSTM for v7M CPUs with an FPU target/arm: Implement M-profile lazy FP state preservation target/arm: Add lazy-FP-stacking support to v7m_stack_write() target/arm: New function armv7m_nvic_set_pending_lazyfp() target/arm: New helper function arm_v7m_mmu_idx_all() ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-04-29hw/devices: Move SMSC 91C111 declaration into a new headerPhilippe Mathieu-Daudé
This commit finally deletes "hw/devices.h". Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-13-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-04-29hw/net/lan9118: Export TYPE_LAN9118 and use it instead of hardcoded stringPhilippe Mathieu-Daudé
Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-12-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-04-29hw/net/ne2000-isa: Add guards to the headerPhilippe Mathieu-Daudé
Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-11-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-04-29hw/devices: Move LAN9118 declarations into a new headerPhilippe Mathieu-Daudé
Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-10-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-04-29hw/devices: Move TI touchscreen declarations into a new headerPhilippe Mathieu-Daudé
Since uWireSlave is only used in this new header, there is no need to expose it via "qemu/typedefs.h". Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-9-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-04-29hw/devices: Move Gamepad declarations into a new headerPhilippe Mathieu-Daudé
Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-8-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-04-29hw/devices: Move CBus declarations into a new headerPhilippe Mathieu-Daudé
Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-7-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-04-29hw/devices: Move Blizzard declarations into a new headerPhilippe Mathieu-Daudé
Add an entries the Blizzard device in MAINTAINERS. Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-6-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-04-29hw/devices: Move TC6393XB declarations into a new headerPhilippe Mathieu-Daudé
Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190412165416.7977-5-philmd@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-27 14:46:52 +0000