aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-07-02target/riscv: add vector index load and store instructionsLIU Zhiwei
Vector indexed operations add the contents of each element of the vector offset operand specified by vs2 to the base effective address to give the effective address of each element. Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200701152549.1218-8-zhiwei_liu@c-sky.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02target/riscv: add vector stride load and store instructionsLIU Zhiwei
Vector strided operations access the first memory element at the base address, and then access subsequent elements at address increments given by the byte offset contained in the x register specified by rs2. Vector unit-stride operations access elements stored contiguously in memory starting from the base effective address. It can been seen as a special case of strided operations. Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20200701152549.1218-7-zhiwei_liu@c-sky.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02target/riscv: add an internals.h headerLIU Zhiwei
The internals.h keeps things that are not relevant to the actual architecture, only to the implementation, separate. Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200701152549.1218-6-zhiwei_liu@c-sky.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02target/riscv: add vector configure instructionLIU Zhiwei
vsetvl and vsetvli are two configure instructions for vl, vtype. TB flags should update after configure instructions. The (ill, lmul, sew ) of vtype and the bit of (VSTART == 0 && VL == VLMAX) will be placed within tb_flags. Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200701152549.1218-5-zhiwei_liu@c-sky.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02target/riscv: support vector extension csrLIU Zhiwei
The v0.7.1 specification does not define vector status within mstatus. A future revision will define the privileged portion of the vector status. Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200701152549.1218-4-zhiwei_liu@c-sky.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02target/riscv: implementation-defined constant parametersLIU Zhiwei
vlen is the vector register length in bits. elen is the max element size in bits. vext_spec is the vector specification version, default value is v0.7.1. Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200701152549.1218-3-zhiwei_liu@c-sky.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02target/riscv: add vector extension field in CPURISCVStateLIU Zhiwei
The 32 vector registers will be viewed as a continuous memory block. It avoids the convension between element index and (regno, offset). Thus elements can be directly accessed by offset from the first vector base address. Signed-off-by: LIU Zhiwei <zhiwei_liu@c-sky.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20200701152549.1218-2-zhiwei_liu@c-sky.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02hw/riscv: Allow 64 bit access to SiFive CLINTAlistair Francis
Commit 5d971f9e672507210e77d020d89e0e89165c8fc9 "memory: Revert "memory: accept mismatching sizes in memory_region_access_valid"" broke most RISC-V boards as they do 64 bit accesses to the CLINT and QEMU would trigger a fault. Fix this failure by allowing 8 byte accesses. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: LIU Zhiwei<zhiwei_liu@c-sky.com> Message-Id: <122b78825b077e4dfd39b444d3a46fe894a7804c.1593547870.git.alistair.francis@wdc.com>
2020-07-02riscv: plic: Add a couple of mising sifive_plic_update callsJessica Clarke
Claiming an interrupt and changing the source priority both potentially affect whether an interrupt is pending, thus we must re-compute xEIP. Note that we don't put the sifive_plic_update inside sifive_plic_claim so that the logging of a claim (and the resulting IRQ) happens before the state update, making the causal effect clear, and that we drop the explicit call to sifive_plic_print_state when claiming since sifive_plic_update already does that automatically at the end for us. This can result in both spurious interrupt storms if you fail to complete an IRQ before enabling interrupts (and no other actions occur that result in a call to sifive_plic_update), but also more importantly lost interrupts if a disabled interrupt is pending and then becomes enabled. Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20200618210649.22451-1-jrtc27@jrtc27.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02riscv: plic: Honour source prioritiesJessica Clarke
The source priorities can be used to order sources with respect to other sources, not just as a way to enable/disable them based off a threshold. We must therefore always claim the highest-priority source, rather than the first source we find. Signed-off-by: Jessica Clarke <jrtc27@jrtc27.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20200618202343.20455-1-jrtc27@jrtc27.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-07-02Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2020-07-02' ↵Peter Maydell
into staging Error reporting patches patches for 2020-07-02 # gpg: Signature made Thu 02 Jul 2020 10:55:48 BST # gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653 # gpg: issuer "armbru@redhat.com" # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full] # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full] # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-error-2020-07-02: (28 commits) migration/rdma: Plug memory leaks in qemu_rdma_registration_stop() arm/{bcm2835,fsl-imx25,fsl-imx6}: Fix realize error API violations hw/arm/armsse: Fix armsse_realize() error API violation aspeed: Fix realize error API violation arm/stm32f205 arm/stm32f405: Fix realize error API violation amd_iommu: Fix amdvi_realize() error API violation x86: Fix x86_cpu_new() error handling mips/cps: Fix mips_cps_realize() error API violations riscv_hart: Fix riscv_harts_realize() error API violations riscv/sifive_u: Fix sifive_u_soc_realize() error API violations hw/arm: Drop useless object_property_set_link() error handling hw: Fix error API violation around object_property_set_link() qdev: Drop qbus_set_hotplug_handler() parameter @errp qdev: Drop qbus_set_bus_hotplug_handler() parameter @errp aspeed: Clean up roundabout error propagation vnc: Plug minor memory leak in vnc_display_open() test-util-filemonitor: Plug unlikely memory leak sd/milkymist-memcard: Plug minor memory leak in realize qga: Plug unlikely memory leak in guest-set-memory-blocks spapr: Plug minor memory leak in spapr_machine_init() ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-02Merge remote-tracking branch 'remotes/kraxel/tags/vga-20200701-pull-request' ↵Peter Maydell
into staging vga: bugfixes for ati and sm501, vgabios cleanup. # gpg: Signature made Wed 01 Jul 2020 16:03:48 BST # gpg: using RSA key 4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/vga-20200701-pull-request: configure: vgabios cleanups ati-vga: Add dummy MEM_SDRAM_MODE_REG ati-vga: Do not assert on error ati-vga: Support unaligned access to hardware cursor registers sm501: Fix and optimize overlap check sm501: Convert debug printfs to traces sm501: Do not allow guest to set invalid format sm501: Use stn_he_p/ldn_he_p instead of switch/case sm501: Optimise 1 pixel 2d ops sm501: Introduce variable for commonly used value for better readability sm501: Ignore no-op blits sm501: Drop unneded variable sm501: Fix bounds checks Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2020-07-02migration/rdma: Plug memory leaks in qemu_rdma_registration_stop()Markus Armbruster
qemu_rdma_registration_stop() uses the ERROR() macro to create, report to stderr, and store an Error object. The stored Error object is never used, and its memory is leaked. Even where ERROR() doesn't leak, it is ill-advised. The whole point of passing an Error to the caller is letting the caller handle the error. Error handling may report to stderr, to somewhere else, or not at all. Also reporting in the callee mixes up concerns that should be kept separate. Since I don't know what reporting to stderr is supposed to accomplish, I'm not touching it. Commit 2a1bc8bde7 "migration/rdma: rdma_accept_incoming_migration fix error handling" plugged the same leak in rdma_accept_incoming_migration(). Plug the memory leak the same way: keep the report part, delete the store part. The report part uses fprintf(). If it's truly an error, it should use error_report() instead. But I don't know, so I leave it alone, just like commit 2a1bc8bde7 did. Fixes: 2da776db4846eadcb808598a5d3484d149773c05 Cc: Dr. David Alan Gilbert <dgilbert@redhat.com> Cc: Juan Quintela <quintela@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200630090351.1247703-27-armbru@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2020-07-02arm/{bcm2835,fsl-imx25,fsl-imx6}: Fix realize error API violationsMarkus Armbruster
The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. bcm2835_peripherals_realize(), fsl_imx25_realize() and fsl_imx6_realize() are wrong that way: they pass &err to object_property_set_uint() and object_property_set_bool() without checking it, and then to sysbus_realize(). Harmless, because the former can't actually fail here. Fix by passing &error_abort instead. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Andrew Baumann <Andrew.Baumann@microsoft.com> Cc: "Philippe Mathieu-Daudé" <philmd@redhat.com> Cc: Jean-Christophe Dubois <jcd@tribudubois.net> Cc: qemu-arm@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200630090351.1247703-26-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-07-02hw/arm/armsse: Fix armsse_realize() error API violationMarkus Armbruster
The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. armsse_realize() is wrong that way: it passes &err to object_property_set_int() multiple times without checking it, and then to sysbus_realize(). Harmless, because the former can't actually fail here. Fix by passing &error_abort instead. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: qemu-arm@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200630090351.1247703-25-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-07-02aspeed: Fix realize error API violationMarkus Armbruster
The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. aspeed_soc_ast2600_realize() and aspeed_soc_realize() are wrong that way: they pass &err to object_property_set_int() and object_property_set_bool() without checking it, and then to sysbus_realize(). Harmless, because the former can't actually fail here. Fix by passing &error_abort instead. Cc: "Cédric Le Goater" <clg@kaod.org> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: Andrew Jeffery <andrew@aj.id.au> Cc: Joel Stanley <joel@jms.id.au> Cc: qemu-arm@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200630090351.1247703-24-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-07-02arm/stm32f205 arm/stm32f405: Fix realize error API violationMarkus Armbruster
The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. stm32f205_soc_realize() and stm32f405_soc_realize() are wrong that way: they pass &err to object_property_set_int() without checking it, and then to qdev_realize(). Harmless, because the former can't actually fail here. Fix by passing &error_abort instead. Cc: Alistair Francis <alistair@alistair23.me> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: qemu-arm@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20200630090351.1247703-23-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-07-02amd_iommu: Fix amdvi_realize() error API violationMarkus Armbruster
The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. amdvi_realize() is wrong that way: it passes @errp to qdev_realize(), object_property_get_int(), and msi_init() without checking it. I can't tell offhand whether qdev_realize() can fail here. Fix by checking it for failure. object_property_get_int() can't. Fix by passing &error_abort instead. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200630090351.1247703-22-armbru@redhat.com>
2020-07-02x86: Fix x86_cpu_new() error handlingMarkus Armbruster
The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. x86_cpu_new() is wrong that way: it passes &local_err to object_property_set_uint() without checking it, and then to qdev_realize(). If both fail, we'll trip error_setv()'s assertion. To assess the bug's impact, we'd need to figure out how to make both calls fail. Too much work for ignorant me, sorry. Fix by checking for failure right away. Cc: Igor Mammedov <imammedo@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200630090351.1247703-21-armbru@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
2020-07-02mips/cps: Fix mips_cps_realize() error API violationsMarkus Armbruster
The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. mips_cps_realize() is wrong that way: it passes &err to multiple object_property_set_FOO() without checking for failure, and then to sysbus_realize(). Harmless, because the object_property_set_FOO() can't actually fail here. Fix by passing &error_abort instead. Cc: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Aleksandar Rikalo <aleksandar.rikalo@syrmia.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200630090351.1247703-20-armbru@redhat.com>
2020-07-02riscv_hart: Fix riscv_harts_realize() error API violationsMarkus Armbruster
The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. riscv_harts_realize() is wrong that way: it passes @errp to riscv_hart_realize() in a loop. I can't tell offhand whether this can fail. Fix by checking for failure in each iteration. Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Alistair Francis <Alistair.Francis@wdc.com> Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: qemu-riscv@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20200630090351.1247703-19-armbru@redhat.com>
2020-07-02riscv/sifive_u: Fix sifive_u_soc_realize() error API violationsMarkus Armbruster
The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. sifive_u_soc_realize() is wrong that way: it passes &err to sysbus_realize() four times before checking it. Harmless, because the first three can't actually fail (I think). Fix by checking for failure right away. Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Alistair Francis <Alistair.Francis@wdc.com> Cc: Sagar Karandikar <sagark@eecs.berkeley.edu> Cc: Bastian Koppelmann <kbastian@mail.uni-paderborn.de> Cc: Bin Meng <bmeng.cn@gmail.com> Cc: qemu-riscv@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20200630090351.1247703-18-armbru@redhat.com>
2020-07-02hw/arm: Drop useless object_property_set_link() error handlingMarkus Armbruster
object_property_set_link() fails when the property doesn't exist, is not settable, or its .check() method fails. These are all programming errors here, so passing it &error_abort is appropriate. Cc: Peter Maydell <peter.maydell@linaro.org> Cc: "Cédric Le Goater" <clg@kaod.org> Cc: Andrew Jeffery <andrew@aj.id.au> Cc: Joel Stanley <joel@jms.id.au> Cc: qemu-arm@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200630090351.1247703-17-armbru@redhat.com>
2020-07-02hw: Fix error API violation around object_property_set_link()Markus Armbruster
The Error ** argument must be NULL, &error_abort, &error_fatal, or a pointer to a variable containing NULL. Passing an argument of the latter kind twice without clearing it in between is wrong: if the first call sets an error, it no longer points to NULL for the second call. virtio_gpu_pci_base_realize(), virtio_vga_base_realize(), sparc32_ledma_device_realize(), sparc32_dma_realize(), sparc32_dma_realize() xilinx_axidma_realize(), mips_cps_realize(), macio_realize_ide(), xilinx_enet_realize(), and virtio_iommu_pci_realize() are wrong that way: they reuse the argument they pass to object_property_set_link() for another call. Harmless, because object_property_set_link() can't actually fail for them: it fails when the property doesn't exist, is not settable, or its .check() method fails. Fix by passing &error_abort instead. Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: "Edgar E. Iglesias" <edgar.iglesias@gmail.com> Cc: Alistair Francis <alistair@alistair23.me> Cc: Peter Maydell <peter.maydell@linaro.org> Cc: qemu-arm@nongnu.org Cc: Aleksandar Markovic <aleksandar.qemu.devel@gmail.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Cc: Aleksandar Rikalo <aleksandar.rikalo@syrmia.com> Cc: Eric Auger <eric.auger@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20200630090351.1247703-16-armbru@redhat.com> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2020-07-02qdev: Drop qbus_set_hotplug_handler() parameter @errpMarkus Armbruster
qbus_set_hotplug_handler() is a simple wrapper around object_property_set_link(). object_property_set_link() fails when the property doesn't exist, is not settable, or its .check() method fails. These are all programming errors here, so passing &error_abort to qbus_set_hotplug_handler() is appropriate. Most of its callers do. Exceptions: * pcie_cap_slot_init(), shpc_init(), spapr_phb_realize() pass NULL, i.e. they ignore errors. * spapr_machine_init() passes &error_fatal. * s390_pcihost_realize(), virtio_serial_device_realize(), s390_pcihost_plug() pass the error to their callers. The latter two keep going after the error, which looks wrong. Drop the @errp parameter, and instead pass &error_abort to object_property_set_link(). Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200630090351.1247703-15-armbru@redhat.com>
2020-07-02qdev: Drop qbus_set_bus_hotplug_handler() parameter @errpMarkus Armbruster
All callers pass &error_abort. Drop the parameter. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com> Cc: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200630090351.1247703-14-armbru@redhat.com>
2020-07-02aspeed: Clean up roundabout error propagationMarkus Armbruster
Replace sysbus_realize(SYS_BUS_DEVICE(&s->spi[i]), &local_err); error_propagate(&err, local_err); if (err) { error_propagate(errp, err); return; } by sysbus_realize(SYS_BUS_DEVICE(&s->spi[i]), &err); if (err) { error_propagate(errp, err); return; } Cc: Cédric Le Goater <clg@kaod.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Cédric Le Goater <clg@kaod.org> Message-Id: <20200630090351.1247703-13-armbru@redhat.com>
2020-07-02vnc: Plug minor memory leak in vnc_display_open()Markus Armbruster
vnc_display_print_local_addr() leaks the Error object when qio_channel_socket_get_local_address() fails. Seems unlikely. Called when we create a VNC display with vnc_display_open(). Plug the leak by passing NULL to ignore the error. Cc: Daniel P. Berrange <berrange@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200630090351.1247703-12-armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-07-02test-util-filemonitor: Plug unlikely memory leakMarkus Armbruster
test_file_monitor_events() leaks an Error object when qemu_file_monitor_add_watch() fails, which seems unlikely. Plug it. Cc: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200630090351.1247703-11-armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-07-02sd/milkymist-memcard: Plug minor memory leak in realizeMarkus Armbruster
milkymist_memcard_realize() leaks an Error object when realization of its "sd-card" device fails. Quite harmless, since we only ever realize this once, in milkymist_init() via milkymist_memcard_create(). Plug the leak. Fixes: 3d0369ba499866cc6a839f71212d97876500762d Cc: Philippe Mathieu-Daudé <philmd@redhat.com> Cc: Michael Walle <michael@walle.cc> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200630090351.1247703-10-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
2020-07-02qga: Plug unlikely memory leak in guest-set-memory-blocksMarkus Armbruster
transfer_memory_block() leaks an Error object when reading file /sys/devices/system/memory/memory<INDEX>/state fails with errno other than ENOENT, and @sys2memblk is false, i.e. when the state file exists but cannot be read (seems quite unlikely), and this is guest-set-memory-blocks, not guest-get-memory-blocks. Plug the leak. Fixes: bd240fca42d5f072fb758a71720d9de9990ac553 Cc: Michael Roth <mdroth@linux.vnet.ibm.com> Cc: Hailiang Zhang <zhang.zhanghailiang@huawei.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Message-Id: <20200630090351.1247703-9-armbru@redhat.com>
2020-07-02spapr: Plug minor memory leak in spapr_machine_init()Markus Armbruster
spapr_machine_init() leaks an Error object when kvmppc_check_papr_resize_hpt() fails and spapr->resize_hpt is SPAPR_RESIZE_HPT_DISABLED, i.e. when the host doesn't support hash page table resizing, and the user didn't ask for it. As harmless as memory leaks can possibly be. Plug it. Fixes: 30f4b05bd090564181554d0890605eb2c143e4ea Cc: David Gibson <dgibson@redhat.com> Cc: qemu-ppc@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Acked-by: David Gibson <david@gibson.dropbear.id.au> Message-Id: <20200630090351.1247703-8-armbru@redhat.com>
2020-07-02usb/dev-mtp: Fix Error double free after inotify failureMarkus Armbruster
error_report_err() frees its first argument. Freeing it again is wrong. Don't. Fixes: 47287c27d0c367a89f7b2851e23a7f8b2d499dd6 Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: Daniel P. Berrangé <berrange@redhat.com> Cc: qemu-stable@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20200630090351.1247703-7-armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-07-02tests: Use error_free_or_abort() where appropriateMarkus Armbruster
Replace g_assert(err != NULL); error_free(err); err = NULL; and variations thereof by error_free_or_abort(&err); Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20200630090351.1247703-6-armbru@redhat.com>
2020-07-02tests: Use &error_abort where appropriateMarkus Armbruster
Receiving the error in a local variable only to assert there is none is less clear than passing &error_abort. Clean up. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20200630090351.1247703-5-armbru@redhat.com>
2020-07-02Clean up some calls to ignore Error objects the right wayMarkus Armbruster
Receiving the error in a local variable only to free it is less clear (and also less efficient) than passing NULL. Clean up. Cc: Daniel P. Berrange <berrange@redhat.com> Cc: Jerome Forissier <jerome@forissier.org> CC: Greg Kurz <groug@kaod.org> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Message-Id: <20200630090351.1247703-4-armbru@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2020-07-02pci: Delete useless error_propagate()Markus Armbruster
Cc: Jens Freimann <jfreimann@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Jens Freimann <jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20200630090351.1247703-3-armbru@redhat.com>
2020-07-02net/virtio: Fix failover_replug_primary() return value regressionMarkus Armbruster
Commit 150ab54aa6 "net/virtio: fix re-plugging of primary device" fixed failover_replug_primary() to return false on failure. Commit 5a0948d36c "net/virtio: Fix failover error handling crash bugs" broke it again for hotplug_handler_plug() failure. Unbreak it. Commit 5a0948d36c4cbc1c5534afac6fee99de55245d12 Fixes: 5a0948d36c4cbc1c5534afac6fee99de55245d12 Cc: Jens Freimann <jfreimann@redhat.com> Cc: Michael S. Tsirkin <mst@redhat.com> Cc: qemu-stable@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Jens Freimann <jfreimann@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Message-Id: <20200630090351.1247703-2-armbru@redhat.com>
2020-07-02hw/virtio/virtio-iommu-pci.c: Fix typo in error messagePeter Maydell
Fix a typo in an error message in virtio_iommu_pci_realize(): "Check you machine" should be "Check your machine". Reported-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20200625100811.12690-1-peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-07-02chardev/tcp: Fix error message double free errorlichun
Errors are already freed by error_report_err, so we only need to call error_free when that function is not called. Cc: qemu-stable@nongnu.org Signed-off-by: lichun <lichun@ruijie.com.cn> Message-Id: <20200621213017.17978-1-lichun@ruijie.com.cn> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message improved, cc: qemu-stable] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2020-06-30configure: vgabios cleanupsGerd Hoffmann
Commit 91b8eba9ec3f ("vgabios: remove submodule and build rules.") removed the vgabios submodule, but left some traces in the configure script. Remove them. Reported-by: BALATON Zoltan <balaton@eik.bme.hu> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20200622131240.9624-1-kraxel@redhat.com
2020-06-30ati-vga: Add dummy MEM_SDRAM_MODE_REGBALATON Zoltan
Radeon chips have an SDRAM mode reg that is accessed by some drivers. We don't emulate the memory controller but provide some default value to prevent drivers getting unexpected 0. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Message-id: cc1324b9ef06beb8ae233ddc77dedd8bab9b8624.1592737958.git.balaton@eik.bme.hu Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-06-30ati-vga: Do not assert on errorBALATON Zoltan
Do not abort on unsupported value just print log and continue. While display will likely be broken this prevents malicious guest to crash QEMU causing denial of service. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Message-id: 0c13dab5d8e3b7e7479c3edbf53aeac8c09de6de.1592737958.git.balaton@eik.bme.hu Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-06-30ati-vga: Support unaligned access to hardware cursor registersBALATON Zoltan
This fixes horizontal mouse movement and pointer color with MacOS that writes these registers with access size less than 4 so previously only the last portion of access was effective overwriting previous partial writes. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Message-id: ba1d5ba97f246e8807f86f1243c2bdc6497dc8f2.1592737958.git.balaton@eik.bme.hu Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-06-30sm501: Fix and optimize overlap checkBALATON Zoltan
When doing reverse blit we need to check if source and dest overlap but it is not trivial due to possible different base and pitch of source and dest. Do rectangle overlap if base and pitch match, otherwise just check if memory area containing the rects overlaps so rects could possibly overlap. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Message-Id: <20200624164737.A941374633D@zero.eik.bme.hu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-06-30sm501: Convert debug printfs to tracesBALATON Zoltan
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: caf97bf0c84a440896ddf020e84c312fa5c15076.1592686588.git.balaton@eik.bme.hu Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-06-30sm501: Do not allow guest to set invalid formatBALATON Zoltan
Prevent guest setting invalid format value that might trip checks in sm501_2d_operation(). Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 26d4fa9b8ce81e2723e98d592ccba7550042752c.1592686588.git.balaton@eik.bme.hu Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-06-30sm501: Use stn_he_p/ldn_he_p instead of switch/caseBALATON Zoltan
Instead of open coding op with different sizes using a switch and type casting it can be written more compactly using stn_he_p/ldn_he_p. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: e2f649cb286f0735a10ec87c1b36a7ae081acb61.1592686588.git.balaton@eik.bme.hu Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-06-30sm501: Optimise 1 pixel 2d opsBALATON Zoltan
Some guests do 1x1 blits which is faster to do directly than calling a function for it so avoid overhead in this case. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 7cccc302d7b4c5c313bad7681ac4686417143c3e.1592686588.git.balaton@eik.bme.hu Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2020-06-30sm501: Introduce variable for commonly used value for better readabilityBALATON Zoltan
The bytes per pixel value can be calculated from format but it's used freqently enough (and will be used more in subseqent patches) so store it in a variable for better readabilty. Also drop some unneded 0x prefix around where new variable is defined. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: b9ea5ef2d68583db9f3fb73a2b859abbd7c044a8.1592686588.git.balaton@eik.bme.hu Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-04 09:25:24 +0000