| Age | Commit message (Collapse) | Author |
|---|
|
The macOS runner ignores them and always uses 4 CPUs and 12 GiB of
RAM, so remove our setting to avoid wrong expectations.
Message-ID: <20241125124342.187594-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
According to our support policy, we only support the two latest
major versions of macOS, and we already removed compatibility code
for older versions. However, it's still possible that people install
an older version of XCode on a recent version of macOS - which won't
be able to compile QEMU anymore, see for example the ticket here:
https://gitlab.com/qemu-project/qemu/-/issues/2694
Thus let's set the expectations right and refuse older versions of
XCode that do not match the two latest versions of macOS anymore.
Message-ID: <20241126081054.244365-1-thuth@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
There is a bug in the process of resolving the serial port base address
in the fdt of the loongarch VM UEFI. When both serial port information
and rng-seed information are chosen in the fdt, there is a probability
that the serial port base address cannot be resolved correctly.
This problem can be fixed by updating UEFI.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2686
Signed-off-by: Xianglai Li <lixianglai@loongson.cn>
Message-ID: <20241127013438.2206426-1-lixianglai@loongson.cn>
Tested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
hvf on Arm is supported since commit a1477da3ddeb ("hvf: Add Apple
Silicon support").
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Alexander Graf <agraf@csgraf.de>
Message-ID: <20241127-build-v1-1-65b8162733f0@daynix.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Make it clear that the commands have to be run from the folder with the
build, and use the python3 from our pyvenv to make sure that the
pycotap module is available.
Message-ID: <20241112115302.470527-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
into staging
* Assorted small ppc fixes
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCgAdFiEETkN92lZhb0MpsKeVZ7MCdqhiHK4FAmdF/gUACgkQZ7MCdqhi
# HK55/xAAw1AXhd+B9JODn6bpDzIvG1yZN81X7xm5WtVQwb9GgBlacBMgVRZQvulX
# 0TH0GBe2/+NkIgr/8c2j2NN3VwME86w56R7E9XFStwh9Q+80vJNT898023gAeN7k
# qiy+XBroUBkJJhuJOYXMCsgg7j0eTaCdVJxqytKBtr4vQnxRfkgKLeHKyMSF0uNu
# geRg76V3elleDNIhSood8GJ/O+Boom9Dvrsj7FwxIfTRnT8d1cwUV599fOJMYW/A
# EOquM54eREhCymVOMTx3gpJAMQXMGJ9LKR6AuIWEu1t4J9KJD27I5a56ASjz8BcO
# RH6DeqDVSauv25NqWKk4388xYTzd1zTScG4X7qdLcoLwy+wjyB90mvbLFmpuNjrG
# bR5BALRF0OtJ2SQ+DHM8h0OPQANl33c0YCU5GHMsFMiAkPJPaZWib1VrzeU8JzjW
# nUbKPE6htYh6Ee6dyGq/E1SP7QgmJTavZ/aY8j5e5iyJBWEZuS80TZ8FYv6ETFp7
# 5SHpRcvREZs4GO8vWwh8yNuepvQ5O6iK79kQUjcdREvRjT419m50cfJwyMxhG16r
# IeNkny7YtfX7s90s8zhw3WQECmBpfKqvzXtFZPORdge2MJSHFmYpnip9uLp1r1pU
# 1BUe1m1vubqd6/2JLw0FLIIqjuEv9VLDh4HI6ehG/7G7gwnwlRc=
# =Acg2
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 26 Nov 2024 16:57:41 GMT
# gpg: using RSA key 4E437DDA56616F4329B0A79567B30276A8621CAE
# gpg: Good signature from "Nicholas Piggin <npiggin@gmail.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 4E43 7DDA 5661 6F43 29B0 A795 67B3 0276 A862 1CAE
* tag 'pull-ppc-for-9.2-2-20241127' of https://gitlab.com/npiggin/qemu:
hw/ppc/pegasos2: Fix IRQ routing from pci.0
ppc/spapr: fix drc index mismatch for partially enabled vcpus
ppc/pnv: Add xscom- prefix to pervasive-control region name
target/ppc: Fix THREAD_SIBLING_FOREACH for multi-socket
ppc/pnv: Fix direct controls quiesce
target/ppc: Fix non-maskable interrupt while halted
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
https://git.linaro.org/people/pmaydell/qemu-arm into staging
target-arm queue:
* target/arm/tcg/cpu32.c: swap ATCM and BTCM register names
* docs/system/arm: Fix broken links and missing feature names
# -----BEGIN PGP SIGNATURE-----
#
# iQJNBAABCAA3FiEE4aXFk81BneKOgxXPPCUl7RQ2DN4FAmdF/vUZHHBldGVyLm1h
# eWRlbGxAbGluYXJvLm9yZwAKCRA8JSXtFDYM3m4VD/95q5242ldAFCDj3pftP7tZ
# DCdY+AZZiUc+2puCjUlxCaKyXkTr4ifwUe79RStbatW80JxGJbJHeRK1VA4dNlPD
# trl+6fN5gS6VpvIpkfS92qH8VDF2XfygPIjisCUf7MIsJCgLa9XEJ8lQvHcxgT2v
# VSYholfKrU5bsS5UIuMC+cNjTaLLgwEW0RSqvo0/ZTnOZgfLJk6PD938WV6kbHoA
# 6qbwLgoKoSaZDxmnKAxqMMsnMPAnYE4mSSQsawwa92f5zj7p6Pz9FjDBGRuBnBan
# JeSyW9C7X555BT5YxluEqicsOK+xGg58y3QrQuDRwXHUO3gCMBMS+CGapNPhA7rN
# sTIILk2JsGuer4w6Gz/xOIr/nyqufejJd91AVrfC782UXqfi1Gb/xYfsLOz4xSr5
# TzvXMmD/u0yna5OLc6S+eFY5+qWvuIUwty4OTBPN/txd+pzDnsdISMaqXfDl0Czj
# idUVN+xEVBhKvHCFcFt15iwSMgoQ62Vyh5EWyZ5kaeC/w5L6rt+B/Es3XBnx2XSi
# CTU6FQHPrgqbbjF9PIOPq8lavbXTKZ/KsXhCCQ02zh9wLG9JH9nnGLWB7uEIDd8N
# yrd5qp47FooJYisZcfI9SmAU7tcYHbaNmFmGTA2b9UPJW8SvNmzSdhKV/nPFV9JK
# MwJwXffOhI8kXobUrJo03A==
# =yUs5
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 26 Nov 2024 17:01:41 GMT
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# gpg: aka "Peter Maydell <peter@archaic.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* tag 'pull-target-arm-20241126' of https://git.linaro.org/people/pmaydell/qemu-arm:
docs/system/arm/aspeed: add missing model supermicrox11spi-bmc
docs/system/arm/fby35: update link to product page
docs/system/arm/: add FEAT_DoubleLock
docs/system/arm/: add FEAT_MTE_ASYNC
target/arm/tcg/: fix typo in FEAT name
docs/system/arm/emulation: add FEAT_SSBS2
docs/system/arm/emulation: fix typo in feature name
docs/system/arm/emulation: mention armv9
target/arm/tcg/cpu32.c: swap ATCM and BTCM register names
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The MV64361 has two PCI buses one of which is used for AGP on
PegasosII. So far we only emulated the PCI bus on pci.1 but some
graphics cards are only recognised by some guests when connected to
pci.0 corresponding to the AGP port. So far the interrupts were not
routed from pci.0 so this patch fixes that allowing the use of both
PCI buses. On real board only INTA and INTB are connected for AGP but
to avoid surprises we connect all 4 PCI interrupt lines so pci.0 can
be used for all PCI cards as well.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
In case when vcpus are explicitly enabled/disabled in a non-consecutive
order within a libvirt xml, it results in a drc index mismatch during
vcpu hotplug later because the existing logic uses vcpu id to derive the
corresponding drc index which is not correct. Use env->core_index to
derive a vcpu's drc index as appropriate to fix this issue.
For ex, for the given libvirt xml config:
<vcpus>
<vcpu id='0' enabled='yes' hotpluggable='no'/>
<vcpu id='1' enabled='yes' hotpluggable='yes'/>
<vcpu id='2' enabled='no' hotpluggable='yes'/>
<vcpu id='3' enabled='yes' hotpluggable='yes'/>
<vcpu id='4' enabled='no' hotpluggable='yes'/>
<vcpu id='5' enabled='yes' hotpluggable='yes'/>
<vcpu id='6' enabled='no' hotpluggable='yes'/>
<vcpu id='7' enabled='no' hotpluggable='yes'/>
</vcpus>
We see below error on guest console with "virsh setvcpus <domain> 5" :
pseries-hotplug-cpu: CPU with drc index 10000002 already exists
This patch fixes the issue by using correct drc index for explicitly
enabled vcpus during init.
Reported-by: Anushree Mathur <anushree.mathur@linux.vnet.ibm.com>
Tested-by: Anushree Mathur <anushree.mathur@linux.vnet.ibm.com>
Signed-off-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
By convention, xscom regions get a xscom- prefix.
Fixes: 1adf24708bf7 ("hw/ppc: Add pnv nest pervasive common chiplet model")
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
The THREAD_SIBLING_FOREACH macro wasn't excluding threads from other
chips. Add chip_index field to the thread state and add a check for the
new field in the macro.
Fixes: b769d4c8f4c6 ("target/ppc: Add initial flags and helpers for SMT support")
Signed-off-by: Glenn Miles <milesg@linux.ibm.com>
[npiggin: set chip_index for spapr too]
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
powernv CPUs have a set of control registers that can stop, start, and
do other things to control a thread's execution.
Using this interface to stop a thread puts it into a particular state
that can be queried, and is distinguishable from other things that might
stop the CPU (e.g., going idle, or being debugged via gdb, or stopped by
the monitor).
Add a new flag that can speficially distinguish this state where it is
stopped with control registers. This solves some hangs when rebooting
powernv machines when skiboot is modified to allow QEMU to use the CPU
control facility (that uses controls to bring all secondaries to a known
state).
Fixes: c8891955086 ("ppc/pnv: Implement POWER10 PC xscom registers for direct controls")
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
The ppc (pnv and spapr) NMI injection code does not go through the
asynchronous interrupt path and set a bit in env->pending_interrupts
and raise an interrupt request that the cpu_exec() loop can see.
Instead it injects the exception directly into registers.
This can lead to cpu_exec() missing that the thread has work to do,
if a NMI is injected while it was idle.
Fix this by clearing halted when injecting the interrupt. Probably
NMI injection should be reworked to use the interrupt request interface,
but this seems to work as a minimal fix.
Fixes: 3431648272d3 ("spapr: Add support for new NMI interface")
Reviewed-by: Glenn Miles <milesg@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
|
|
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Message-id: 20241122225049.1617774-13-pierrick.bouvier@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Tested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20241122225049.1617774-8-pierrick.bouvier@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
We already implement FEAT_DoubleLock (see commit f94a6df5dd6a7) when
the ID registers call for it. This feature is actually one that must
*not* be implemented in v9.0, but since our documentation lists
everything we can emulate, we should include FEAT_DoubleLock in the
list.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-id: 20241122225049.1617774-7-pierrick.bouvier@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: expand commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
We already implement FEAT_MTE_ASYNC; we just forgot to list it
in the documentation.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241122225049.1617774-6-pierrick.bouvier@linaro.org
[PMM: expand commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241122225049.1617774-5-pierrick.bouvier@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
We implemented this at the same times as FEAT_SSBS, but forgot
to list it in the documentation.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241122225049.1617774-4-pierrick.bouvier@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: improve commit message]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241122225049.1617774-3-pierrick.bouvier@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241122225049.1617774-2-pierrick.bouvier@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
According to Cortex-R5 r1p2 manual, register with opcode2=0 is
BTCM and with opcode2=1 is ATCM, - exactly the opposite from how
qemu labels them. Just swap the labels to avoid confusion, -
both registers are implemented as always-zero.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20241121171602.3273252-1-mjt@tls.msk.ru
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEIV1G9IJGaJ7HfzVi7wSWWzmNYhEFAmdFRyQACgkQ7wSWWzmN
# YhFU1Qf/T9bBOCrbQqbZSG7eKk8QuH35zcgNU7FzFTrGeVCc1bUMNYhiioqAFmE+
# h5h/3vmkmt+01vaTuimTRumI2SJnFFwggveJDWf+ICSl9MRtCXB5+w0n71vJ6gUO
# njm36pIl+aMkZIrsDc7lLewVouZkF8mAKP7mn9x53s5lX/HbXZSdPJmrkdUXtNT5
# d3nXlUkNhEWKL9dKIQ9dWYmj3l+tLfuYPiR8a+kKFMEwHlGBuFbNoVN03v5VvFyf
# Dmy1P1ZFApP0SsR4SiccXg7C8AslBC6wc7Bhd0aiKpGBnlt20mE9EJSVyrU8yP1p
# UTKzzB0QHN7Nnd6AcFRhWvo9C74mGg==
# =qP+q
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 26 Nov 2024 03:57:24 GMT
# gpg: using RSA key 215D46F48246689EC77F3562EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* tag 'net-pull-request' of https://github.com/jasowang/qemu:
virtio-net: Add queues before loading them
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
https://gitlab.com/peterx/qemu into staging
Migration pull for 9.2-rc2
- Fabiano's patch to remove double vmstate cleanup in postcopy
- Peter's patch to whitelist pipes in fd migration URIs
# -----BEGIN PGP SIGNATURE-----
#
# iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZ0TqmRIccGV0ZXJ4QHJl
# ZGhhdC5jb20ACgkQO1/MzfOr1waJ7AD8Cb8tHkjFG25Q3ufRrkj3d05oVZDRU4lx
# 6bgku9xbUQ0A/1ruu96sy89q9t9facPHn+y/0xmmpBJMB5EJ1Jxunm0M
# =2Ctw
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 25 Nov 2024 21:22:33 GMT
# gpg: using EDDSA key B9184DC20CC457DACF7DD1A93B5FCCCDF3ABD706
# gpg: issuer "peterx@redhat.com"
# gpg: Good signature from "Peter Xu <xzpeter@gmail.com>" [marginal]
# gpg: aka "Peter Xu <peterx@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: B918 4DC2 0CC4 57DA CF7D D1A9 3B5F CCCD F3AB D706
* tag 'migration-20241125-pull-request' of https://gitlab.com/peterx/qemu:
migration: Fix extra cleanup at postcopy listen
migration: Allow pipes to keep working for fd migrations
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
into staging
testing, docs and plugin updates for rc2
- cleanup leftover avocado bits from functional test
- ensure we keep functional logs for tests
- improve test console handling to detect prompts
- remove hacking timer.sleep() usage in functional tests
- convert Aarch64 tuxrun tests to functional test
- update Aarch64 tuxrun images to avoid corrupt blk I/O ops
- auto-generate the TCG plugin API symbols to avoid missing them
- fix rust pl011 model handling of DeviceID regs
- update docs to refer to "commonly known identity"
- convert aspeed tests to functional framework and remove hacky sleeps
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmdEZXEACgkQ+9DbCVqe
# KkRdMAf+JoSdKn3ck/eji270bZ2Y3evgDuP/qOZlcBtUJJ7+bUvhEOnBMApwKRD8
# u63hz7M4LIV5k3mezlEADf+oEpZ2FR3nIDM0dTY2CXYZm6av+0dNV0qFhXwjkslk
# aqJLiJYgNl3wsyn/ftYNLiBhCid0sOGMvEOFZI6ELBh5KH8eiNdyrsaD0GSmpwZi
# BsZUi8TOKy6EBeWnco/FLBV8ZVZUHuHNBl84jUY/8g7cxGMJfK8KoqMJ5XYoiQoJ
# 1dYDqFmoP24iQRks6K6beFRdS/CBet36Nhsv7We/gf17Msw5uFo7Cho+touRCMrK
# AmVKFdOX/OqJAHqlEKquYAD7bPjpaA==
# =Xa/M
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 25 Nov 2024 11:54:25 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-9.2-rc2-updates-251124-1' of https://gitlab.com/stsquad/qemu: (28 commits)
tests/functional: Remove sleep workarounds from Aspeed tests
tests/functional: Convert Aspeed arm SDK tests
tests/functional: Convert Aspeed aarch64 SDK tests
docs: explicitly permit a "commonly known identity" with SoB
rust/pl011: Fix range checks for device ID accesses
plugins: eradicate qemu-plugins.symbols static file
plugins: detect qemu plugin API symbols from header
plugins: add missing export for qemu_plugin_num_vcpus
tests/functional: update the aarch64 tuxrun tests
tests/functional: Convert the Avocado aarch64 tuxrun tests
tests/functional: avoid accessing log_filename on earlier failures
tests/functional: add a QMP backdoor for debugging stalled tests
tests/functional: remove time.sleep usage from tuxrun tests
tests/functional: rewrite console handling to be bytewise
tests/functional: require non-NULL success_message for console wait
tests/functional: don't try to wait for the empty string
tests/functional: logs details of console interaction operations
tests/functional: enable debug logging for QEMUMachine
tests/functional: honour requested test VM name in QEMUMachine
tests/functional: put QEMUMachine logs in testcase log directory
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Call virtio_net_set_multiqueue() to add queues before loading their
states. Otherwise the loaded queues will not have handlers and elements
in them will not be processed.
Cc: qemu-stable@nongnu.org
Fixes: 8c49756825da ("virtio-net: Add only one queue pair when realizing")
Reported-by: Laurent Vivier <lvivier@redhat.com>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
|
|
After fixing the loadvm cleanup race the qemu_loadvm_state_cleanup()
is now being called twice in the postcopy listen thread.
Fixes: 4ce5622908 ("migration/multifd: Fix rb->receivedmap cleanup race")
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20241125191128.9120-1-farosas@suse.de
Signed-off-by: Peter Xu <peterx@redhat.com>
|
|
Libvirt may still use pipes for old file migrations in fd: URI form,
especially when loading old images dumped from Libvirt's compression
algorithms.
In that case, Libvirt needs to compress / uncompress the images on its own
over the migration binary stream, and pipes are passed over to QEMU for
outgoing / incoming migrations in "fd:" URIs.
For future such use case, it should be suggested to use mapped-ram when
saving such VM image. However there can still be old images that was
compressed in such way, so libvirt needs to be able to load those images,
uncompress them and use the same pipe mechanism to pass that over to QEMU.
It means, even if new file migrations can be gradually moved over to
mapped-ram (after Libvirt start supporting it), Libvirt still needs the
uncompressor for the old images to be able to load like before.
Meanwhile since Libvirt currently exposes the compression capability to
guest images, it may needs its own lifecycle management to move that over
to mapped-ram, maybe can be done after mapped-ram saved the image, however
Dan and PeterK raised concern on temporary double disk space consumption.
I suppose for now the easiest is to enable pipes for both sides of "fd:"
migrations, until all things figured out from Libvirt side on how to move
on.
And for "channels" QMP interface support on "migrate" / "migrate-incoming"
commands, we'll also need to move away from pipe. But let's leave that for
later too.
So far, still allow pipes to happen like before on both save/load sides,
just like we would allow sockets to pass.
Cc: qemu-stable <qemu-stable@nongnu.org>
Cc: Fabiano Rosas <farosas@suse.de>
Cc: Peter Krempa <pkrempa@redhat.com>
Cc: Daniel P. Berrangé <berrange@redhat.com>
Fixes: c55deb860c ("migration: Deprecate fd: for file migration")
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Link: https://lore.kernel.org/r/20241120160132.3659735-1-peterx@redhat.com
Signed-off-by: Peter Xu <peterx@redhat.com>
|
|
Block layer patches
- Fix qmp_device_add() to not throw non-scalar options away (fixes
iothread-vq-mapping being silently ignored in device_add)
- Fix qdev property crash with integer PCI addresses and JSON -device
- iotests: Fix mypy failure
- parallels: Avoid potential integer overflow
- ssh: libssh broke with non-blocking sessions, use a blocking one for now
- Fix crash in migration_is_running()
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmdES74RHGt3b2xmQHJl
# ZGhhdC5jb20ACgkQfwmycsiPL9abFQ//fGmBl3Jp99GWB1R0y49/hPhfj0166UGj
# zeEmhdy+k6gKywyhVy0Fj0xLztDTb/2bGflrwtDDxYA0PBLel461QSeJUzwDsn9h
# ZGLyFrosXgIPADP55RF1wJ6c+m13MX4jVy80Neh2jemhinMazjj3ADb4RdCf0B4M
# XoYOy96goDFPlzZNvr08dlaDvJaD5QmPYX8nK7TaZqZOSYvdSRWMuB+QQCPj+qEf
# UfpBo3beNsxedNu/1wKS1Nc6FVX7VHKoMzhDLAvxkYMBKcCg9l5lEAGrgp61O+79
# nYZmPtEG5RHsMNBCZtk8zZMIHPg2Ydxpj3jOV3eA0rF4Twk/fPrOOfBEUHT6PapX
# tCS1UJtgyQA2GTULiax3vKV4yBSpmUzbhjddNwBkW7uG1md67d17nqbjkEhHVxZL
# yMuauFRCx5onzE0TSgTYEMAmAgD9oawuGUqBiNCOqJlTbGZwJ9l7jtwP4Bl1gskk
# pWzL/PLP8MkVf50dcP0QBPNHn85/oZOwv5yNr2Z893qNQhh/0xqCEFwqSq2SJOkg
# vKd/bAusgmicoh1XD0o0+mv2ewZor/JghrU83YDPKWM1MmOwePZ8wRTx9pJtZWvq
# Pnc71397zppHIw7aIWKYDoyQ3aeaoTM/oY2Q5Y7et6c/FvGW5JtFjsPCGbgm9mw+
# +6JA51ujtYU=
# =oLdE
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 25 Nov 2024 10:04:46 GMT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* tag 'for-upstream' of https://repo.or.cz/qemu/kevin:
ssh: Do not switch session to non-blocking mode
vl: use qmp_device_add() in qemu_create_cli_devices()
qdev-monitor: avoid QemuOpts in QMP device_add
tests/avocado/hotplug_blk: Fix addr in device_add command
qdev: Fix set_pci_devfn() to visit option only once
python: silence pylint raising-non-exception error
python: disable too-many-positional-arguments warning
iotests: correct resultclass type in ReproducibleTestRunner
iotests: reflow ReproducibleTestRunner arguments
parallels: fix possible int overflow
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEEIV1G9IJGaJ7HfzVi7wSWWzmNYhEFAmdEEtgACgkQ7wSWWzmN
# YhH5qAgAlKdcx/gFt4EBXtjVq/qbPluEGOQxvcRYLlN90rPLHPgCjAoT5ly3fIv1
# 4kCgcVZyG8SdGu1n0TzTTS9kg5tL7weQ9xEWwF0oyyuZABgAB7w/wpC8MHSkJFOn
# 2Tv+2Iab0dJ+e1pw71OMpE/YR5X2xq5vopsSHRtnyGWfRPGswJFwka+f8FS5DSiq
# 2CeNxADgTkPxJgDmOrNSsAPz8Rns77FAZdvDMqFjx1Lrqm8kPv9jzwOMO+a/2LpC
# t6OkpFzGjiiskPjSnSn/tzo4TfWYoABjJaI7b3vEqmNEJSTAaxltZNtSXZucctEt
# 1ihnFdjr/wPwGK/5Wu+qGnfDbFNxBw==
# =W4y1
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 25 Nov 2024 06:02:00 GMT
# gpg: using RSA key 215D46F48246689EC77F3562EF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* tag 'net-pull-request' of https://github.com/jasowang/qemu:
virtio-net: Copy received header to buffer
virtio-net: Initialize hash reporting values
virtio-net: Fix hash reporting when the queue changes
virtio-net: Do not check for the queue before RSS
virtio-net: Fix size check in dhclient workaround
net: checksum: Convert data to void *
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
These were introduced in the avocado tests to workaround read issues
when interacting with console. They are no longer necessary and we can
use the expected "login:" string or the command prompt now. Drop the
last use of exec_command.
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20241122090322.1934697-4-clg@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
|
|
Drop the SSH connection which was introduced in the avocado tests to
workaround read issues when interacting with console.
EXTRA_BOOTARGS was introduced to reduce the console output at Linux
boot time. This didn't have the desired effect as we still had issues
when trying to match patterns on the console and we had to use the ssh
connection as a workaround.
While at it, remove the U-Boot EXTRA_BOOTARGS variable which has
become useless.
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20241122090322.1934697-3-clg@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
|
|
Drop the SSH connection which was introduced in the avocado tests to
workaround read issues when interacting with console.
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20241122090322.1934697-2-clg@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
|
|
The docs for submitting a patch describe using your "Real Name" with
the Signed-off-by line. Although somewhat ambiguous, this has often
been interpreted to mean someone's legal name.
In recent times, there's been a general push back[1] against the notion
that use of Signed-off-by in a project automatically requires / implies
the use of legal ("real") names and greater awareness of the downsides.
Full discussion of the problems of such policies is beyond the scope of
this commit message, but at a high level they are liable to marginalize,
disadvantage, and potentially result in harm, to contributors.
TL;DR: there are compelling reasons for a person to choose distinct
identities in different contexts & a decision to override that choice
should not be taken lightly.
A number of key projects have responded to the issues raised by making
it clear that a contributor is free to determine the identity used in
SoB lines:
* Linux has clarified[2] that they merely expect use of the
contributor's "known identity", removing the previous explicit
rejection of pseudonyms.
* CNCF has clarified[3] that the real name is simply the identity
the contributor chooses to use in the context of the community
and does not have to be a legal name, nor birth name, nor appear
on any government ID.
Since we have no intention of ever routinely checking any form of ID
documents for contributors[4], realistically we have no way of knowing
anything about the name they are using, except through chance, or
through the contributor volunteering the information. IOW, we almost
certainly already have people using pseudonyms for contributions.
This proposes to accept that reality and eliminate unnecessary friction,
by following Linux & the CNCF in merely asking that a contributors'
commonly known identity, of their choosing, be used with the SoB line.
[1] Raised in many contexts at many times, but a decent overall summary
can be read at https://drewdevault.com/2023/10/31/On-real-names.html
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=d4563201f33a022fc0353033d9dfeb1606a88330
[3] https://github.com/cncf/foundation/blob/659fd32c86dc/dco-guidelines.md
[4] Excluding the rare GPG key signing parties for regular maintainers
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20241021190939.1482466-1-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20241121165806.476008-40-alex.bennee@linaro.org>
|
|
The peripheral and PrimeCell identification registers of pl011 are located at
offset 0xFE0 - 0xFFC. To check if a read falls to such registers, the C
implementation checks if the offset-shifted-by-2 (not the offset itself) is in
the range 0x3F8 - 0x3FF.
Use the same check in the Rust implementation.
This fixes the timeout of the following avocado tests:
* tests/avocado/boot_linux_console.py:BootLinuxConsole.test_arm_virt
* tests/avocado/replay_kernel.py:ReplayKernelNormal.test_arm_virt
* tests/avocado/replay_kernel.py:ReplayKernelNormal.test_arm_vexpressa9
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Junjie Mao <junjie.mao@hotmail.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <SY0P300MB102644C4AC34A3AAD75DC4D5955C2@SY0P300MB1026.AUSP300.PROD.OUTLOOK.COM>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20241121165806.476008-39-alex.bennee@linaro.org>
|
|
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20241112212622.3590693-4-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20241121165806.476008-38-alex.bennee@linaro.org>
|
|
Instead of using a static file (error prone and hard to keep in sync),
we generate it using a script.
Note: if a symbol is not exported, we'll now notice it when linking for
Windows/MacOS platforms.
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20241112212622.3590693-3-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20241121165806.476008-37-alex.bennee@linaro.org>
|
|
Fixes: 4a448b148ca ("plugins: add qemu_plugin_num_vcpus function")
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20241112212622.3590693-2-pierrick.bouvier@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20241121165806.476008-36-alex.bennee@linaro.org>
|
|
Now there are new up to date images available we should update to them.
With the new rootfs the blk I/O errors also go away on arm64be.
Cc: Anders Roxell <anders.roxell@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20241121165806.476008-22-alex.bennee@linaro.org>
|
|
Move the tests to a new file so that they can be run via
qemu-system-aarch64 in the functional framework.
Since these were the last tests in tests/avocado/tuxrun_baselines.py,
we can now remove that file, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20241121165806.476008-20-alex.bennee@linaro.org>
|
|
If a failure occurs early in the QemuBaseTest constructor, the
'log_filename' object atttribute may not exist yet. This happens
most notably if the QEMU_TEST_QEMU_BINARY is not set. We can't
initialize 'log_filename' earlier as we use the binary to identify
the architecture which is then used to build the path in which the
logs are stored.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20241121154218.1423005-19-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20241121165806.476008-19-alex.bennee@linaro.org>
|
|
Support the QEMU_TEST_QMP_BACKDOOR=backdoor.sock env variable as a
way to get a QMP backdoor for debugging a stalled QEMU test. Most
typically this would be used if running the tests directly:
$ QEMU_TEST_QMP_BACKDOOR=backdoor.sock \
QEMU_TEST_QEMU_BINARY=./build/qemu-system-arm \
PYTHONPATH=./python \
./tests/functional/test_arm_tuxrun.py
And then, when the test stalls, in a second shell run:
$ ./scripts/qmp/qmp-shell backdoor.sock
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20241121154218.1423005-18-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20241121165806.476008-18-alex.bennee@linaro.org>
|
|
The tuxrun tests send a series of strings to the guest to login
and then run commands. Since we have been unable to match on
console output that isn't followed by a newline, the test used
many time.sleep() statements to pretend to synchronize with
the guest.
This has proved to be unreliable for the aarch64be instance of
the tuxrun tests, with the test often hanging. The hang is a
very subtle timing problem, and it is suspected that some
(otherwise apparently harmless) I/O error messages could be
resulting in full FIFO buffers, stalling interaction with
the guest.
With the newly rewritten console interaction able to match
strings that don't have a following newline, the tux run
tests can now match directly on the login prompt, and/or
shell PS1 prompt.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2689
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20241121154218.1423005-17-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20241121165806.476008-17-alex.bennee@linaro.org>
|
|
The console interaction that waits for predicted strings uses
readline(), and thus is only capable of waiting for strings
that are followed by a newline.
This is inconvenient when needing to match on some things,
particularly login prompts, or shell prompts, causing tests
to use time.sleep(...) instead, which is unreliable.
Switch to reading the console 1 byte at a time, comparing
against the success/failure messages until we see a match,
regardless of whether a newline is encountered.
The success/failure comparisons are done with the python bytes
type, rather than strings, to avoid the problem of needing to
decode partially received multibyte utf8 characters.
Heavily inspired by a patch proposed by Cédric, but written
again to work in bytes, rather than strings.
Co-developed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20241121154218.1423005-16-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20241121165806.476008-16-alex.bennee@linaro.org>
|
|
When waiting for expected output, the 'success_message' is a mandatory
parameter, with 'failure_message' defaulting to None.
The code has logic which indicates it was trying to cope with
'success_message' being None and 'failure_message' being non-None but
it does not appear able to actually do anything useful. The check for
'success_message is None' will break out of the loop before any check
for 'failure_message' has been performed.
IOW, for practcal purposes 'success_message' must be non-None unless
'send_string' is set. Assert this expectation and simplify the loop
logic.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20241121154218.1423005-15-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20241121165806.476008-15-alex.bennee@linaro.org>
|
|
Telling exec_command_wand_wait_for_pattern to wait for the empty
string does not make any conceptual sense, as a check for empty
string will always succeed. It makes even less sense when followed
by a call to wait_for_console_pattern() with a real match.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20241121154218.1423005-14-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20241121165806.476008-14-alex.bennee@linaro.org>
|
|
When functional tests go wrong, it will often be related to the console
interaction wait state. By logging the messages that we're looking for,
and data we're about to be sending, it'll be easier to diagnose where
tests are getting stuck.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20241121154218.1423005-13-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20241121165806.476008-13-alex.bennee@linaro.org>
|
|
Set the 'qemu.machine' logger to 'DEBUG' level, to ensure we see log
messages related to the QEMUMachine class. Most importantly this
ensures we capture the full QEMU command line args for instances we
spawn.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20241121154218.1423005-12-berrange@redhat.com>
Tested-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20241121165806.476008-12-alex.bennee@linaro.org>
|
|
The functional test case class is going to the trouble of passing
around a machine name, but then fails to give this QEMUMachine. As
a result, QEMUMachine will create a completely random name. Since
log file names match the machine name, this results in log files
accumulating over time.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20241121154218.1423005-11-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20241121165806.476008-11-alex.bennee@linaro.org>
|
