aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-08-10Device specification for shared memory PCI deviceCam Macdonell
Signed-off-by: Cam Macdonell <cam@cs.ualberta.ca> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-10Add qemu_ram_alloc_from_ptr functionCam Macdonell
Provide a function to add an allocated region of memory to the qemu RAM. This patch is copied from Marcelo's qemu_ram_map() in qemu-kvm and given the clearer name qemu_ram_alloc_from_ptr(). Signed-off-by: Cam Macdonell <cam@cs.ualberta.ca> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-08-09Merge remote branch 'kwolf/for-anthony' into stagingAnthony Liguori
2010-08-09microblaze: Fix the target version of stat64 structEdgar E. Iglesias
MicroBlaze needs TARGET_STAT64_HAS_BROKEN_ST_INO. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@petalogix.com>
2010-08-07audio/sdl: return on errormalc
Signed-off-by: malc <av1474@comtv.ru>
2010-08-06mips: Add support for VInt and VEIC irq modesEdgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar@axis.com>
2010-08-06audio/sdl: be more anal about errorsmalc
Signed-off-by: malc <av1474@comtv.ru>
2010-08-06audio: make audio_pt_init block all signalsmalc
Signed-off-by: malc <av1474@comtv.ru>
2010-08-03sparc32: use FW_CFG_CMDLINE_SIZEBlue Swirl
Add support for getting kernel command line size with FW_CFG_CMDLINE_SIZE. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-08-03ide: Avoid canceling IDE DMAAndrea Arcangeli
The reason for not actually canceling the I/O is because with virtualization and lots of VM running, a guest fs may mistake a overload of the host, as an IDE timeout. So rather than canceling the I/O, it's safer to wait I/O completion and simulate that the I/O has completed just before the io cancellation was requested by the guest. This way if ntfs or an app writes data without checking for -EIO retval, and it thinks the write has succeeded, it's less likely to run into troubles. Similar issues for reads. Furthermore because the DMA operation is splitted into many synchronous aio_read/write if there's more than one entry in the SG table, without this patch the DMA would be cancelled in the middle, something we've no idea if it happens on real hardware too or not. Overall this seems a great risk for zero gain. This approach is sure safer than previous code given we can't pretend all guest fs code out there to check for errors and reply the DMA if it was completed partially, given a timeout would never materialize on a real harddisk unless there are defective blocks (and defective blocks are practically only an issue for reads never for writes in any recent hardware as writing to blocks is the way to fix them) or the harddisk breaks as a whole. Signed-off-by: Izik Eidus <ieidus@redhat.com> Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-08-03block: Change bdrv_eject() not to drop the imageMarkus Armbruster
bdrv_eject() gets called when a device model opens or closes the tray. If the block driver implements method bdrv_eject(), that method gets called. Drivers host_cdrom implements it, and it opens and closes the physical tray, and nothing else. When a device model opens, then closes the tray, media changes only if the user actively changes the physical media while the tray is open. This is matches how physical hardware behaves. If the block driver doesn't implement method bdrv_eject(), we do something quite different: opening the tray severs the connection to the image by calling bdrv_close(), and closing the tray does nothing. When the device model opens, then closes the tray, media is gone, unless the user actively inserts another one while the tray is open, with a suitable change command in the monitor. This isn't how physical hardware behaves. Rather inconvenient when programs "helpfully" eject media to give you a chance to change it. The way bdrv_eject() behaves here turns that chance into a must, which is not what these programs or their users expect. Change the default action not to call bdrv_close(). Instead, note the tray status in new BlockDriverState member tray_open. Use it in bdrv_is_inserted(). Arguably, the device models should keep track of tray status themselves. But this is less invasive. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-08-03block: Fix bdrv_has_zero_initKevin Wolf
Assuming that any image on a block device is not properly zero-initialized is actually wrong: Only raw images have this problem. Any other image format shouldn't care about it, they initialize everything properly themselves. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-08-03block migration: replace tabs by spaces.Yoshiaki Tamura
Signed-off-by: Yoshiaki Tamura <tamura.yoshiaki@lab.ntt.co.jp> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-08-03loadvm: improve tests before bdrv_snapshot_goto()Miguel Di Ciurcio Filho
This patch improves the resilience of the load_vmstate() function, doing further and better ordered tests. In load_vmstate(), if there is any error on bdrv_snapshot_goto(), except if the error is on VM state device, load_vmstate() will return zero and the VM will be started with major corruption chances. The current process: - test if there is any writable device without snapshot support - if exists return -error - get the device that saves the VM state, possible return -error but unlikely because it was tested earlier - flush I/O - run bdrv_snapshot_goto() on devices - if fails, give an warning and goes to the next (not good!) - if fails on the VM state device, return zero (not good!) - check if the requested snapshot exists on the device that saves the VM state and the state is not zero - if fails return -error - open the file with the VM state - if fails return -error - load the VM state - if fails return -error - return zero New behavior: - get the device that saves the VM state - if fails return -error - check if the requested snapshot exists on the device that saves the VM state and the state is not zero - if fails return -error - test if there is any writable device without snapshot support - if exists return -error - test if the devices with snapshot support have the requested snapshot - if anyone fails, return -error - flush I/O - run snapshot_goto() on devices - if anyone fails, return -error - open the file with the VM state - if fails return -error - load the VM state - if fails return -error - return zero do_loadvm must not call vm_start if any error has occurred in load_vmstate. Signed-off-by: Miguel Di Ciurcio Filho <miguel.filho@gmail.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-08-03block: Change bdrv_commit to handle multiple sectors at onceKevin Wolf
bdrv_commit copies the image to its backing file sector by sector, which is (surprise!) relatively slow. Let's take a larger buffer and handle more sectors at once if possible. With a 1G qcow2 file, this brought the time bdrv_commit takes down from 5:06 min to 1:14 min for me. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-08-02fix last cpu timer initializationArtyom Tarasenko
The timer #0 is the system timer, so the timer #num_cpu is the timer of the last CPU, and it must be initialized in slavio_timer_reset. Don't mark non-existing timers as running. Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-31Initialize a variable in all casesBlue Swirl
Commit d167f9bc06a577d6c85b8ed6991c1efe175aae7d missed this one: /src/qemu/ui/vnc-enc-tight.c:1483: warning: 'ret' may be used uninitialized in this function Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-31Fix uint8_t comparison with negative valueBlue Swirl
Commit 7bccf57383cca60a778d5c543ac80c9f62d89ef2 missed this one: /src/qemu/ui/vnc-enc-tight.c: In function 'send_sub_rect': /src/qemu/ui/vnc-enc-tight.c:1527: warning: comparison is always true due to limited range of data type Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-31Fix a warning on OpenSolarisBlue Swirl
Add a missing #include statement to avoid a warning: /src/qemu/net/tap-solaris.c: In function 'tap_open': /src/qemu/net/tap-solaris.c:189: warning: implicit declaration of function 'error_report' Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-07-31Correctly identify multiple cpus in SMP systemsHervé Poussineau
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-31Remove unused constantHervé Poussineau
Remove unused constant MIPS_FCR0 Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-31jazz led: Fix debug printsHervé Poussineau
Add a macro to easily enable/disable debug prints Also fix wrong printf formatters Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-31xilinx-s3adsp: Add support for loading u-boot images.Edgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2010-07-31xilinx-s3adsp: Fix loading of raw binaries.Edgar E. Iglesias
Set high to a word aligned address beyond loaded image. Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2010-07-30Remove unused eventfd.hMike McCormack
This header is not present on my system and causes a build failure, but is also not used in these files, so remove it. Signed-off-by: Mike McCormack <mikem@ring3k.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-30migration: Accept 'cont' only after successful incoming migrationAmit Shah
When a 'cont' is issued on a VM that's just waiting for an incoming migration, the VM reboots and boots into the guest, possibly corrupting its storage since it could be shared with another VM running elsewhere. Ensure that a VM started with '-incoming' is only run when an incoming migration successfully completes. A new qerror, QERR_MIGRATION_EXPECTED, is added to signal that 'cont' failed due to no incoming migration has been attempted yet. Reported-by: Laine Stump <laine@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com> Reviewed-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-30mips64el: fulong: PCI_DEVFN() clean up.Isaku Yamahata
Use PCI_DEVFN() where appropriate. The resulted stripped binary remains same with/without thie patch. Cc: Huacai Chen <zltjiangshi@gmail.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-30remove pointless if from vl.cJoel Schopp
We already set sockets to nonzero in the code above. So this if statement always evaluates true. Remove it. Signed-off-by: Joel Schopp <jschopp@austin.ibm.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-30fix variable type in qemu-io.cJoel Schopp
The variable len can get a negative return value from cvtnum, which we check for, but which is impossible with the current unsigned variable type. Currently the if(len < 0) check is pointless. This patch fixes that. Signed-off-by: Joel Schopp <jschopp@austin.ibm.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-30remove dead code from hw/loader.cJoel Schopp
Removing dead code. Above we already continued when rom->addr + valuegreaterthan0 < addr so this condition is always false. Signed-off-by: Joel Schopp <jschopp@austin.ibm.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-30savevm: Fix memory leak of compat structAlex Williamson
Forgot to check for and free these. Found-by: Zachary Amsden <zamsden@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-30virtio-serial: Check if more max_ports specified than we can handleAmit Shah
Currently virtio-serial supports a maximum of 31 ports. Specifying the 'max_ports' parameter to be > 31 on the cmd line causes badness. Ensure we initialise virtio-serial only if max_ports is within the supported range. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-07-30Merge branch 'for-anthony' of git://repo.or.cz/qemu/kevinAurelien Jarno
* 'for-anthony' of git://repo.or.cz/qemu/kevin: Fix -snapshot deleting images on disk change block: Use error codes from lower levels for error message block: default to 0 minimal / optiomal I/O size move 'unsafe' to end of caching modes in help virtio-blk: Create exit function to unregister savevm block migration: propagate return value when bdrv_write() returns < 0 ide/atapi: add support for GET EVENT STATUS NOTIFICATION
2010-07-30linux-user: fix build on hosts not using guest baseAurelien Jarno
Commit 68a1c816868b3e35a1da698af412b29e61b1948a broke qemu on hosts not using guest base. It uses reserved_va unconditionally in mmap.c. To avoid to many #ifdef #endif blocks, define RESERVED_VA as either reserved_va or 0ul, and use it instead of reserved_va, similarly to what has been done with guest_base/GUEST_BASE.
2010-07-29linux-user: Protect against allocation failure in load_symbols.Richard Henderson
Cc: malc <av1474@comtv.ru> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: malc <av1474@comtv.ru>
2010-07-29cris: Correct settls1 testcase.Edgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2010-07-29cris: Correct ADDO and ADDOQ testcases.Edgar E. Iglesias
Verified on real HW. Signed-off-by: Edgar E. Iglesias <edgar@axis.com>
2010-07-29linux-user: Re-use load_elf_image for the main binary.Richard Henderson
This requires moving the PT_INTERP extraction and GUEST_BASE handling into load_elf_image. Key this off a non-null pointer argument to receive the interpreter name. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2010-07-29linux-user: Extract load_elf_image from load_elf_interp.Richard Henderson
Moving toward a single copy of the elf binary loading code. Fill in the details of the loaded image into a struct image_info. Adjust create_elf_tables to read from such structures instead of from a collection of passed arguments. Don't return error values from load_elf_interp; always exit(-1) with a message to stderr. Collect elf_interpreter handling in load_elf_binary to a common spot. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2010-07-29linux-user: Remove partial support for a.out interpreters.Richard Henderson
At the bottom of the a.out support was the unimplemented load_aout_interp function. There were other portions of the support that didn't look right; when I went to look in the Linux kernel for clarification, I found that the support for such interpreters has been removed from binfmt_elf. There doesn't seem to be any reason to keep this broken support in qemu. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2010-07-29linux-user: Put the stack guard page at the top.Richard Henderson
There are no supported stack-grows-up targets. We were putting the guard page at the highest address, i.e. the bottom of the stack. Use the maximum of host and guest page size for the guard size. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2010-07-29linux-user: Improve consistency checking in elf headers.Richard Henderson
Validate more fields of the elf header. Extract those checks into two common functions to be used in both load_elf_interp and load_elf_binary. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2010-07-29linux-user: Load symbols from the interpreter.Richard Henderson
First, adjust load_symbols to accept a load_bias parameter. At the same time, read the entire section header table in one go, use pread instead f lseek+read for the symbol and string tables, and properly free allocated structures on error exit paths. Second, adjust load_elf_interp to compute load_bias. This requires finding out the built-in load addresses. Which allows us to honor a pre-linked interpreter image when possible, and eliminate the hard-coded INTERP_MAP_SIZE value. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2010-07-29linux-user: Clean up byte-swapping in elfload.c.Richard Henderson
Remove ifdefs from code by defining empty inline functions when byte swapping isn't needed. Push loops over swapping arrays of structures into the swapping functions. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2010-07-29linux-user: Define ELF_DATA generically.Richard Henderson
The only consideration on this value is the target endianness. The existing defines were incorrect for alpha and sh4eb. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2010-07-29linux-user: Reduce lseek+reads while loading elf files.Richard Henderson
Define BPRM_BUF_SIZE to 1k and read that amount initially. If the data we want from the binary is in this buffer, use it instead of reading from the file again. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2010-07-29linux-user: Reindent elfload.c.Richard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2010-07-29Add more DT_* and AT_* constants to qemu's copy of elf.h.Richard Henderson
Moving some PPC AT_* constants from elfload.c at the same time. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2010-07-29linux-user: Handle filesz < memsz for any PT_LOAD segment.Richard Henderson
I caught padzero not properly initializing the .bss segment on a statically linked Alpha program. Rather than a minimal patch, replace the gross code with a single mmap+memset. Share more code between load_elf_interp and load_elf_binary. Legally, an ELF program need not have just a single .bss; and PT_LOAD segment can have memsz > filesz. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2010-07-28Update version for 0.13.xAnthony Liguori
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-30 03:47:02 +0000