aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-07-09vfio/display: Fix vfio_display_edid_init() error pathZhenzhong Duan
vfio_display_edid_init() can fail for many reasons and return silently. It would be good to report the error. Old mdev driver may not support vfio edid region and we allow to go through in this case. vfio_display_edid_update() isn't changed because it can be called at runtime when UI changes (i.e. window resize). Fixes: 08479114b0de ("vfio/display: add edid support.") Suggested-by: Cédric Le Goater <clg@redhat.com> Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2024-07-09vfio/display: Fix potential memleak of edid infoZhenzhong Duan
EDID related device region info is leaked in vfio_display_edid_init() error path and VFIODisplay destroying path. Fixes: 08479114b0de ("vfio/display: add edid support.") Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2024-07-09virtio-iommu: Revert transient enablement of IOMMU MR in bypass modeEric Auger
In 94df5b2180d6 ("virtio-iommu: Fix 64kB host page size VFIO device assignment"), in case of bypass mode, we transiently enabled the IOMMU MR to allow the set_page_size_mask() to be called and pass information about the page size mask constraint of cold plugged VFIO devices. Now we do not use the IOMMU MR callback anymore, we can just get rid of this hack. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2024-07-09memory: remove IOMMU MR iommu_set_page_size_mask() callbackEric Auger
Everything is now in place to use the Host IOMMU Device callbacks to retrieve the page size mask usable with a given assigned device. This new method brings the advantage to pass the info much earlier to the virtual IOMMU and before the IOMMU MR gets enabled. So let's remove the call to memory_region_iommu_set_page_size_mask in vfio common.c and remove the single implementation of the IOMMU MR callback in the virtio-iommu.c Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2024-07-09virtio-iommu : Retrieve page size mask on virtio_iommu_set_iommu_device()Eric Auger
Retrieve the Host IOMMU Device page size mask when this latter is set. This allows to get the information much sooner than when relying on IOMMU MR set_page_size_mask() call, whcih happens when the IOMMU MR gets enabled. We introduce check_page_size_mask() helper whose code is inherited from current virtio_iommu_set_page_size_mask() implementation. This callback will be removed in a subsequent patch. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2024-07-09HostIOMMUDevice: Introduce get_page_size_mask() callbackEric Auger
This callback will be used to retrieve the page size mask supported along a given Host IOMMU device. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2024-07-09HostIOMMUDevice : remove Error handle from get_iova_ranges callbackEric Auger
The error handle argument is not used anywhere. let's remove it. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2024-07-09vfio-container-base: Introduce vfio_container_get_iova_ranges() helperEric Auger
Introduce vfio_container_get_iova_ranges() to retrieve the usable IOVA regions of the base container and use it in the Host IOMMU device implementations of get_iova_ranges() callback. We also fix a UAF bug as the list was shallow copied while g_list_free_full() was used both on the single call site, in virtio_iommu_set_iommu_device() but also in vfio_container_instance_finalize(). Instead use g_list_copy_deep. Fixes: cf2647a76e ("virtio-iommu: Compute host reserved regions") Signed-off-by: Eric Auger <eric.auger@redhat.com> Suggested-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2024-07-09virtio-iommu: Fix error handling in virtio_iommu_set_host_iova_ranges()Eric Auger
In case no IOMMUPciBus/IOMMUDevice are found we need to properly set the error handle and return. Fixes : Coverity CID 1549006 Signed-off-by: Eric Auger <eric.auger@redhat.com> Fixes: cf2647a76e ("virtio-iommu: Compute host reserved regions") Reviewed-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
2024-07-09machine_aspeed.py: update to test network for AST2700Jamin Lin
Update test case to test network connection via SSH. Test command: ``` cd build pyvenv/bin/avocado run ../qemu/tests/avocado/machine_aspeed.py:AST2x00MachineSDK.test_aarch64_ast2700_evb_sdk_v09_02 ``` Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@redhat.com>
2024-07-09machine_aspeed.py: update to test ASPEED OpenBMC SDK v09.02 for AST2700Jamin Lin
Update test case to test ASPEED OpenBMC SDK v09.02 for AST2700. ASPEED fixed TX mask issue from linux/drivers/ftgmac100.c. It is required to use ASPEED OpenBMC SDK since v09.02 for AST2700 QEMU network testing. A test image is downloaded from the ASPEED Forked OpenBMC GitHub release repository : https://github.com/AspeedTech-BMC/openbmc/releases/ Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@redhat.com>
2024-07-09hw/block: m25p80: support quad mode for w25q01jvqJamin Lin
According to the w25q01jv datasheet at page 16, it is required to set QE bit in "Status Register 2". Besides, users are able to utilize "Write Status Register 1(0x01)" command to set QE bit in "Status Register 2" and utilize "Read Status Register 2(0x35)" command to get the QE bit status. To support quad mode for w25q01jvq, update collecting data needed 2 bytes for WRSR command in decode_new_cmd function and verify QE bit at the second byte of collecting data bit 2 in complete_collecting_data. Update RDCR_EQIO command to set bit 2 of return data if quad mode enable in decode_new_cmd. Signed-off-by: Troy Lee <troy_lee@aspeedtech.com> Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@redhat.com>
2024-07-09aspeed/soc: set dma64 property for AST2700 ftgmac100Jamin Lin
ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35) And the base address of dram is "0x4 00000000" which is 64bits address. Set dma64 property for ftgmac100 model to support 64bits dram address DMA. Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@redhat.com>
2024-07-09hw/net:ftgmac100: update TX and RX packet buffers address to 64 bitsJamin Lin
ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35) And the base address of dram is "0x4 00000000" which is 64bits address. It have "TXDES 2" and "RXDES 2" to save the high part physical address of packet buffer. Ex: TX packet buffer address [34:0] The "TXDES 2" bits [18:16] which corresponds the bits [34:32] of the 64 bits address of the TX packet buffer address and "TXDES 3" bits [31:0] which corresponds the bits [31:0] of the 64 bits address of the TX packet buffer address. Update TX and RX packet buffers address type to 64 bits for dram 64 bits address DMA support. Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@redhat.com>
2024-07-09hw/net:ftgmac100: introduce TX and RX ring base address high registers to ↵Jamin Lin
support 64 bits ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35) And the base address of dram is "0x4 00000000" which is 64bits address. It have "Normal Priority Transmit Ring Base Address Register High(0x17C)", "High Priority Transmit Ring Base Address Register High(0x184)" and "Receive Ring Base Address Register High(0x18C)" to save the high part physical address of descriptor manager. Ex: TX descriptor manager address [34:0] The "Normal Priority Transmit Ring Base Address Register High(0x17C)" bits [2:0] which corresponds the bits [34:32] of the 64 bits address of the TX ring buffer address. The "Normal Priority Transmit Ring Base Address Register(0x20)" bits [31:0] which corresponds the bits [31:0] of the 64 bits address of the TX ring buffer address. Introduce a new sub region which size is 0x100 for the set of new registers and map it at 0x100 in the container region. This sub region range is from 0x100 to 0x1ff. Introduce a new property and object attribute to activate the region for new registers. Introduce a new memop handlers for the new register read and write. Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@redhat.com>
2024-07-09hw/net:ftgmac100: update ring base address to 64 bitsJamin Lin
Update TX and RX ring base address data type to uint64_t for 64 bits dram address DMA support. Both "Normal Priority Transmit Ring Base Address Register(0x20)" and "Receive Ring Base Address Register (0x24)" are used for saving the low part physical address of descriptor manager. Therefore, changes to set TX and RX descriptor manager address bits [31:0] in ftgmac100_read and ftgmac100_write functions. Incrementing the version of vmstate to 2. Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@redhat.com>
2024-07-09hw/net:ftgmac100: update memory region size to 64KBJamin Lin
According to the datasheet of ASPEED SOCs, one MAC controller owns 128KB of register space for AST2500. However, one MAC controller only owns 64KB of register space for AST2600 and AST2700. It set the memory region size 128KB and it occupied another controllers Address Spaces. Update one MAC controller memory region size to 0x1000 because AST2500 did not use register spaces over than 64KB. Introduce a new container region size to 0x1000 and its range is from 0 to 0xfff. This container is mapped a sub region for the current set of register. This sub region range is from 0 to 0xff. Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com> Reviewed-by: Cédric Le Goater <clg@redhat.com>
2024-07-07Merge tag 'pull-qapi-2024-07-06' of https://repo.or.cz/qemu/armbru into stagingRichard Henderson
QAPI patches patches for 2024-07-06 # -----BEGIN PGP SIGNATURE----- # # iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmaI6xcSHGFybWJydUBy # ZWRoYXQuY29tAAoJEDhwtADrkYZTTbQP/AonsqGYQyOPCWae9dfDt+Wy+k2gthoB # dn/3SRjYnA23avEv2/AGAPxgp5MHkpdhh8eqNjWq9QgqgEUh/m0nJztS/MiLMHsR # /PENPy4V2QFf7s5XtIutLiKXgGbzwtHxrbwnCNyQZW6dAK67VBTq5hPQSxFwBVga # FDVm+DS2JehJ7IPMVmPT5gjI2cyDYNc/rxbvcbcb5SqirfJdPFk9nMJUrQ0Qubfs # c9D6l8Cwzbm4JfSeRThs8v9CsDZ1+OIXnpDgGAP9hr7+yYFsovLSHfiLGFxnFXiN # gSKLBNRIzXnC9cFsKY4jXuqFoSFblRccqCtPSYb7sAp3OVwKq3kA/XNuPIAPii8S # cm+bhVJ3lyXUW5/6qruS5tOEkpsTnXC45Uw9nvZDEVXANMn3viZ1qInxKak8Nr+p # k0bOHGE4NzRKkAvGDaTooUOlhG4iy9M+Q4dTcwKIoXTs1Euo8uOjAL+jGwT2pan5 # fb/P1cIqMgMpwSQjwIs7LoYMk20FF44CPtuwA+m85iLbTiiuUfQ4bTnVNMOQMibq # 3QWIrEDfxwrvwMPsv/u/hcc5d2Tb+5QP9CeVmT9woSXJqU2g4yvKKP9JBf7jUFMC # fTpNRcHOWsIoz+AgOrUeYe67fLpqUWQii08JhPg5f4ybbEzkzZub0zOKNFLYumG0 # VT3BQlO+8LdW # =RwDq # -----END PGP SIGNATURE----- # gpg: Signature made Fri 05 Jul 2024 11:58:31 PM PDT # gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653 # gpg: issuer "armbru@redhat.com" # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full] # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full] * tag 'pull-qapi-2024-07-06' of https://repo.or.cz/qemu/armbru: sphinx/qapidoc: Fix to generate doc for explicit, unboxed arguments qapi/parser: don't parse rST markup as section headers qapi: add markup to note blocks qapi: update prose in note blocks qapi: convert "Note" sections to plain rST qapi: nail down convention that Errors sections are lists qapi: fix non-compliant JSON examples docs/qapidoc: fix nested parsing under untagged sections qapi/parser: fix comment parsing immediately following a doc block qapi/parser: preserve indentation in QAPIDoc sections docs/qapidoc: delint a tiny portion of the module docs/qapidoc: remove unused intersperse function qapi: linter fixups Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2024-07-07Merge tag 'sdmmc-20240706' of https://github.com/philmd/qemu into stagingRichard Henderson
SD/MMC patches queue - Use published card address (RCA) in qtest/npcm7xx_sdhci - Have cards use random RCA - Use SD spec v3.01 by default - Convert GEN_CMD to sd_generic_read/write_byte style - Extract SDMMC_COMMON abstract QDev parent from SD_CARD - Few housekeeping # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmaIbbcACgkQ4+MsLN6t # wN6A2RAAvTqk05r+R8ayyGLtxi6RBLb36WfIZy1iaiS3S5i93KrIwqM3LPqWMRRf # 1h2dmflec3q3ebY/iHl6bdasdUlqfZDaw8BKBPETbDt9xCVmEC9/n7Vi7EMPmzP6 # A2ci7ZCDup4gLwp8AuB9OcMJnlVLGCQjW5yOTjN0V1MaG15iv6N7d6Th/aLEPEUr # Ji/kk8adRGJhGRHcbkL7BGK+TxyAOUjjyt0k5e5hSS1W0T4dLgIljxq/L0wOxlZe # Ot11GO/0EykkMIm7uASYXQws8wJFMgfhTYn77ibbzVFCBtSKvsq6ziuX3WopPoGK # 0IfMkiK1vRpKey54Yn3+28ZY0v86c3NXybNlLbdrkvcZJgMrFTb4bpWyhQyx4Xbu # uHfFxfu+rZC8/jfVqHd/RFw5sUliokc9a+KbaG9Yzx5MzXufOnu3iVOpx1vA6ZXX # lX87qA1tZ78kTn/CtAAPx3CBWE9ojgH7wz/ABBTifUkIfDz5kFYT3g+kfygQQ+xh # +bvdfQWeJ51Z3tPrUWm5fSGyB//XmgCfww7CZ1d63QaebAwml0YYvR3kivgnZ9A1 # abLr+uN7o4q3bqaY2FUvtglBPttA58wt7n02utWef8ZHl72hCsbvPtfwp2idUMY7 # ZRqdnHOB+opDbH9Xy9tj3Cqq1UPiEv3U3qXhZtd1Us7LSHXC/bk= # =iKnd # -----END PGP SIGNATURE----- # gpg: Signature made Fri 05 Jul 2024 03:03:35 PM PDT # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] * tag 'sdmmc-20240706' of https://github.com/philmd/qemu: hw/sd/sdcard: Extract TYPE_SDMMC_COMMON from TYPE_SD_CARD hw/sd/sdcard: Introduce set_csd/set_cid handlers hw/sd/sdcard: Cover more SDCardStates hw/sd/sdcard: Trace length of data read on DAT lines hw/sd/sdcard: Remove default case in read/write on DAT lines hw/sd/sdcard: Remove noise from sd_cmd_name() hw/sd/sdcard: Remove noise from sd_acmd_name() hw/sd/sdcard: Remove sd_none enum from sd_cmd_type_t hw/sd/sdcard: Add sd_cmd_GEN_CMD handler (CMD56) hw/sd/sdcard: Rename sd_cmd_SEND_OP_COND handler hw/sd/sdcard: Use spec v3.01 by default hw/sd/sdcard: Remove leftover comment about removed 'spi' Property hw/sd/sdcard: Generate random RCA value tests/qtest/npcm7xx_sdhci: Access the card using its published address hw/sd/npcm7xx_sdhci: Use TYPE_SYSBUS_SDHCI definition hw/sd/sdhci: Log non-sequencial access as GUEST_ERROR Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2024-07-06sphinx/qapidoc: Fix to generate doc for explicit, unboxed argumentsMarkus Armbruster
When a command's arguments are specified as an explicit type T, generated documentation points to the members of T. Example: ## # @announce-self: # # Trigger generation of broadcast RARP frames to update network [...] ## { 'command': 'announce-self', 'boxed': true, 'data' : 'AnnounceParameters'} generates "announce-self" (Command) ------------------------- Trigger generation of broadcast RARP frames to update network [...] Arguments ~~~~~~~~~ The members of "AnnounceParameters" Except when the command takes its arguments unboxed , i.e. it doesn't have 'boxed': true, we generate *nothing*. A few commands have a reference in their doc comment to compensate, but most don't. Example: ## # @blockdev-snapshot-sync: # # Takes a synchronous snapshot of a block device. # # For the arguments, see the documentation of BlockdevSnapshotSync. [...] ## { 'command': 'blockdev-snapshot-sync', 'data': 'BlockdevSnapshotSync', 'allow-preconfig': true } generates "blockdev-snapshot-sync" (Command) ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Takes a synchronous snapshot of a block device. For the arguments, see the documentation of BlockdevSnapshotSync. [...] Same for event data. Fix qapidoc.py to generate the reference regardless of boxing. Delete now redundant references in the doc comments. Fixes: 4078ee5469e5 (docs/sphinx: Add new qapi-doc Sphinx extension) Cc: qemu-stable@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-ID: <20240628112756.794237-1-armbru@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com>
2024-07-06qapi/parser: don't parse rST markup as section headersJohn Snow
The double-colon synax is rST formatting that precedes a literal code block. We do not want to capture these as QAPI-specific sections. Coerce blocks that start with e.g. "Example::" to be parsed as untagged paragraphs instead of special tagged sections. Signed-off-by: John Snow <jsnow@redhat.com> Message-ID: <20240626222128.406106-14-jsnow@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Indentation tweaked for consistency] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2024-07-06qapi: add markup to note blocksJohn Snow
Generally, surround command-line options with ``literal`` markup to help it stand out from prose in rendered HTML, and add cross-references to replace "see also" messages. References to types, values, and other QAPI definitions are not yet adjusted here; they will be converted en masse in a subsequent patch after the new QAPI doc generator is merged. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-ID: <20240626222128.406106-13-jsnow@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2024-07-06qapi: update prose in note blocksJohn Snow
Where I've noticed, rephrase the note to read more fluently. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-ID: <20240626222128.406106-12-jsnow@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2024-07-06qapi: convert "Note" sections to plain rSTJohn Snow
We do not need a dedicated section for notes. By eliminating a specially parsed section, these notes can be treated as normal rST paragraphs in the new QMP reference manual, and can be placed and styled much more flexibly. Convert all existing "Note" and "Notes" sections to pure rST. As part of the conversion, capitalize the first letter of each sentence and add trailing punctuation where appropriate to ensure notes look sensible and consistent in rendered HTML documentation. Markup is also re-aligned to the de-facto standard of 3 spaces for directives. Update docs/devel/qapi-code-gen.rst to reflect the new paradigm, and update the QAPI parser to prohibit "Note" sections while suggesting a new syntax. The exact formatting to use is a matter of taste, but a good candidate is simply: .. note:: lorem ipsum ... ... dolor sit amet ... ... consectetur adipiscing elit ... ... but there are other choices, too. The Sphinx readthedocs theme offers theming for the following forms (capitalization unimportant); all are adorned with a (!) symbol () in the title bar for rendered HTML docs. See https://sphinx-rtd-theme.readthedocs.io/en/stable/demo/demo.html#admonitions for examples of each directive/admonition in use. These are rendered in orange: .. Attention:: ... .. Caution:: ... .. WARNING:: ... These are rendered in red: .. DANGER:: ... .. Error:: ... These are rendered in green: .. Hint:: ... .. Important:: ... .. Tip:: ... These are rendered in blue: .. Note:: ... .. admonition:: custom title admonition body text This patch uses ".. note::" almost everywhere, with just two "caution" directives. Several instances of "Notes:" have been converted to merely ".. note::", or multiple ".. note::" where appropriate. ".. admonition:: notes" is used in a few places where we had an ordered list of multiple notes that would not make sense as standalone/separate admonitions. Two "Note:" following "Example:" have been turned into ordinary paragraphs within the example. NOTE: Because qapidoc.py does not attempt to preserve source ordering of sections, the conversion of Notes from a "tagged section" to an "untagged section" means that rendering order for some notes *may change* as a result of this patch. The forthcoming qapidoc.py rewrite strictly preserves source ordering in the rendered documentation, so this issue will be rectified in the new generator. Signed-off-by: John Snow <jsnow@redhat.com> Acked-by: Stefan Hajnoczi <stefanha@redhat.com> [for block*.json] Message-ID: <20240626222128.406106-11-jsnow@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message clarified slightly, period added to one more note] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2024-07-06qapi: nail down convention that Errors sections are listsJohn Snow
By unstated convention, Errors sections are rST lists. Document the convention, and make the one exception conform. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-ID: <20240626222128.406106-10-jsnow@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2024-07-06qapi: fix non-compliant JSON examplesJohn Snow
The new QMP documentation generator wants to parse all examples as "QMP". We have an existing QMP lexer in docs/sphinx/qmp_lexer.py (Seen in-use here: https://qemu-project.gitlab.io/qemu/interop/bitmaps.html) that allows the use of "->", "<-" and "..." tokens to denote QMP protocol flow with elisions, but otherwise defers to the JSON lexer. To utilize this lexer for the existing QAPI documentation, we need them to conform to a standard so that they lex and render correctly. Once the QMP lexer is active for examples, errant QMP/JSON will produce warning messages and fail the build. Fix any invalid JSON found in QAPI documentation (identified by attempting to lex all examples as QMP; see subsequent commits). Additionally, elisions must be standardized for the QMP lexer; they must be represented as the value "...", so three examples have been adjusted to support that format here. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-ID: <20240626222128.406106-9-jsnow@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2024-07-06docs/qapidoc: fix nested parsing under untagged sectionsJohn Snow
Sphinx does not like sections without titles, because it wants to convert every section into a reference. When there is no title, it struggles to do this and transforms the tree inproperly. Depending on the rST used, this may result in an assertion error deep in the docutils HTMLWriter. (Observed when using ".. admonition:: Notes" under such a section - When this is transformed with its own <title> element, Sphinx is fooled into believing this title belongs to the section and incorrect mutates the docutils tree, leading to errors during rendering time.) When parsing an untagged section (free paragraphs), skip making a hollow section and instead append the parse results to the prior section. Many Bothans died to bring us this information. The resulting output changes are basically invisible. Signed-off-by: John Snow <jsnow@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Message-ID: <20240626222128.406106-8-jsnow@redhat.com> [Mention output changes in commit message] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2024-07-06qapi/parser: fix comment parsing immediately following a doc blockJohn Snow
If a comment immediately follows a doc block, the parser doesn't ignore that token appropriately. Fix that. e.g. > ## > # = Hello World! > ## > > # I'm a comment! will break the parser, because it does not properly ignore the comment token if it immediately follows a doc block. Fixes: 3d035cd2cca6 (qapi: Rewrite doc comment parser) Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-ID: <20240626222128.406106-7-jsnow@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2024-07-06qapi/parser: preserve indentation in QAPIDoc sectionsJohn Snow
Change get_doc_indented() to preserve indentation on all subsequent text lines, and create a compatibility dedent() function for qapidoc.py that removes indentation the same way get_doc_indented() did. This is being done for the benefit of a new qapidoc generator which requires that indentation in argument and features sections are preserved. Prior to this patch, a section like this: ``` @name: lorem ipsum dolor sit amet consectetur adipiscing elit ``` would have its body text be parsed into: ``` lorem ipsum dolor sit amet consectetur adipiscing elit ``` We want to preserve the indentation for even the first body line so that the entire block can be parsed directly as rST. This patch would now parse that segment into: ``` lorem ipsum dolor sit amet consectetur adipiscing elit ``` This is helpful for formatting arguments and features as field lists in rST, where the new generator will format this information as: ``` :arg type name: lorem ipsum dolor sit amet consectetur apidiscing elit ``` ...and can be formed by the simple concatenation of the field list construct and the body text. The indents help preserve the continuation of a block-level element, and further allow the use of additional rST block-level constructs such as code blocks, lists, and other such markup. This understandably breaks the existing qapidoc.py; so a new function is added there to dedent the text for compatibility. Once the new generator is merged, this function will not be needed any longer and can be dropped. I verified this patch changes absolutely nothing by comparing the md5sums of the QMP ref html pages both before and after the change, so it's certified inert. QAPI test output has been updated to reflect the new strategy of preserving indents for rST. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-ID: <20240626222128.406106-6-jsnow@redhat.com> [Lost commit message paragraph restored] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2024-07-06docs/qapidoc: delint a tiny portion of the moduleJohn Snow
In a forthcoming series that adds a new QMP documentation generator, it will be helpful to have a linting baseline. However, there's no need to shuffle around the deck chairs too much, because most of this code will be removed once that new qapidoc generator (the "transmogrifier") is in place. To ease my pain: just turn off the black auto-formatter for most, but not all, of qapidoc.py. This will help ensure that *new* code follows a coding standard without bothering too much with cleaning up the existing code. Code that I intend to keep is still subject to the delinting beam. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-ID: <20240626222128.406106-5-jsnow@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2024-07-06docs/qapidoc: remove unused intersperse functionJohn Snow
This function has been unused since since commit fd62bff901b (sphinx/qapidoc: Drop code to generate doc for simple union tag). Signed-off-by: John Snow <jsnow@redhat.com> Message-ID: <20240626222128.406106-4-jsnow@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> [Commit message tweaked] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2024-07-06qapi: linter fixupsJohn Snow
Fix minor irritants to pylint/flake8 et al. (Yes, these need to be guarded by the Python tests. That's a work in progress, a series that's quite likely to follow once I finish this Sphinx project. Please pardon the temporary irritation.) Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-ID: <20240626222128.406106-3-jsnow@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2024-07-05hw/sd/sdcard: Extract TYPE_SDMMC_COMMON from TYPE_SD_CARDPhilippe Mathieu-Daudé
In order to keep eMMC model simpler to maintain, extract common properties and the common code from class_init to the (internal) TYPE_SDMMC_COMMON. Update the corresponding QOM cast macros. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Cédric Le Goater <clg@redhat.com> Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au> Tested-by: Cédric Le Goater <clg@redhat.com> Message-Id: <20240703134356.85972-6-philmd@linaro.org>
2024-07-05hw/sd/sdcard: Introduce set_csd/set_cid handlersPhilippe Mathieu-Daudé
In preparation of introducing eMMC support which have different CSD/CID structures, introduce a pair of handlers in SDCardClass. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Cédric Le Goater <clg@redhat.com> Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au> Tested-by: Cédric Le Goater <clg@redhat.com> Message-Id: <20240628070216.92609-82-philmd@linaro.org>
2024-07-05hw/sd/sdcard: Cover more SDCardStatesPhilippe Mathieu-Daudé
So far eMMC will only use sd_sleep_state, but all all states specified for completeness. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Cédric Le Goater <clg@redhat.com> Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au> Tested-by: Cédric Le Goater <clg@redhat.com> Message-Id: <20240628070216.92609-81-philmd@linaro.org>
2024-07-05hw/sd/sdcard: Trace length of data read on DAT linesPhilippe Mathieu-Daudé
Some commands expect less than BLOCK_LENGTH. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Cédric Le Goater <clg@redhat.com> Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au> Tested-by: Cédric Le Goater <clg@redhat.com> Message-Id: <20240628070216.92609-80-philmd@linaro.org>
2024-07-05hw/sd/sdcard: Remove default case in read/write on DAT linesPhilippe Mathieu-Daudé
All read/write on DAT lines are explicitly handled. Reaching this point would be a programming error: replace by an assertion. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Cédric Le Goater <clg@redhat.com> Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au> Tested-by: Cédric Le Goater <clg@redhat.com> Message-Id: <20240628070216.92609-79-philmd@linaro.org>
2024-07-05hw/sd/sdcard: Remove noise from sd_cmd_name()Philippe Mathieu-Daudé
These CMD names weren't really useful, "UNKNOWN_CMD" is simpler. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Cédric Le Goater <clg@redhat.com> Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au> Tested-by: Cédric Le Goater <clg@redhat.com> Message-Id: <20240628070216.92609-78-philmd@linaro.org>
2024-07-05hw/sd/sdcard: Remove noise from sd_acmd_name()Philippe Mathieu-Daudé
These ACMD names weren't really useful, "UNKNOWN_ACMD" is simpler. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Cédric Le Goater <clg@redhat.com> Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au> Tested-by: Cédric Le Goater <clg@redhat.com> Message-Id: <20240628070216.92609-77-philmd@linaro.org>
2024-07-05hw/sd/sdcard: Remove sd_none enum from sd_cmd_type_tPhilippe Mathieu-Daudé
All handlers using the 'sd_none' enum got converted, remove it. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Cédric Le Goater <clg@redhat.com> Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au> Tested-by: Cédric Le Goater <clg@redhat.com> Message-Id: <20240628070216.92609-76-philmd@linaro.org>
2024-07-05hw/sd/sdcard: Add sd_cmd_GEN_CMD handler (CMD56)Philippe Mathieu-Daudé
"General command" (GEN_CMD, CMD56) is described as: GEN_CMD is the same as the single block read or write commands (CMD24 or CMD17). The difference is that [...] the data block is not a memory payload data but has a vendor specific format and meaning. Thus this block must not be stored overwriting data block on underlying storage drive. Handle as RAZ/WI. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au> Tested-by: Cédric Le Goater <clg@redhat.com> Message-Id: <20240703134356.85972-3-philmd@linaro.org>
2024-07-05hw/sd/sdcard: Rename sd_cmd_SEND_OP_COND handlerPhilippe Mathieu-Daudé
The correct command name is 'SD SEND_OP_COND', rename accordingly. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Cédric Le Goater <clg@redhat.com> Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au> Tested-by: Cédric Le Goater <clg@redhat.com> Message-Id: <20240703134356.85972-4-philmd@linaro.org>
2024-07-05hw/sd/sdcard: Use spec v3.01 by defaultPhilippe Mathieu-Daudé
Recent SDHCI expect cards to support the v3.01 spec to negociate lower I/O voltage. Select it by default. Versioned machine types with a version of 9.0 or earlier retain the old default (spec v2.00). Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Cédric Le Goater <clg@redhat.com> Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au> Tested-by: Cédric Le Goater <clg@redhat.com> Message-Id: <20240703134356.85972-2-philmd@linaro.org>
2024-07-05hw/sd/sdcard: Remove leftover comment about removed 'spi' PropertyPhilippe Mathieu-Daudé
Commit c3287c0f70 ("hw/sd: Introduce a "sd-card" SPI variant model") removed the 'spi' property. Remove the comment left over. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org> Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au> Message-Id: <20240703085907.66775-2-philmd@linaro.org>
2024-07-05hw/sd/sdcard: Generate random RCA valuePhilippe Mathieu-Daudé
Rather than using the obscure 0x4567 magic value, use a real random one. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au> Message-Id: <20240702140842.54242-5-philmd@linaro.org>
2024-07-05tests/qtest/npcm7xx_sdhci: Access the card using its published addressPhilippe Mathieu-Daudé
Currently setup_sd_card() asks the card its address, but discard the response and use hardcoded 0x4567. Set the SDHC_CMD_RESPONSE bit to have the controller record the bus response, and read the response from the RSPREG0 register. Then we can select the card with its real address. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Tested-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Message-Id: <20240702140842.54242-4-philmd@linaro.org>
2024-07-05hw/sd/npcm7xx_sdhci: Use TYPE_SYSBUS_SDHCI definitionPhilippe Mathieu-Daudé
Use the macro instead of two explicit string literals. Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Cédric Le Goater <clg@redhat.com> Message-Id: <20240702140842.54242-2-philmd@linaro.org>
2024-07-05hw/sd/sdhci: Log non-sequencial access as GUEST_ERRORPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Cédric Le Goater <clg@redhat.com> Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au> Message-Id: <20240702140842.54242-3-philmd@linaro.org>
2024-07-05Merge tag 'pull-maintainer-july24-050724-1' of ↵Richard Henderson
https://gitlab.com/stsquad/qemu into staging Updates for testing, plugins, gdbstub - restore some 32 bit host builds and testing - move some physmem tracepoint definitions - use --userns keep-id for podman builds - cleanup check-tcg compiler flag checking for Arm - fix some casting in fcvt test - tweak check-tcg inline asm for clang - suppress some invalid clang warnings - disable KVM for the TCI builds - improve the insn tracking plugin - cleanups to the lockstep plugin - free plugin data on cpu finalise - assert cpu->index assigned - move qemu_plugin_vcpu_init__async into plugin code - add support for dynamic gdb command tables - allow targets to extend gdb capabilities - enable user-mode MTE support # -----BEGIN PGP SIGNATURE----- # # iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmaH3bEACgkQ+9DbCVqe # KkTnvwf9HS68sTICEJqBfY663hjcfdFGsSV/h3q7SN3fhKm/3JHGNK+kumgqdnaC # ykd7tx0AtBGgKm83B7G6MPywsVMIosMeV3mFeJTVHhKsFwGNjSiGkr3j4R2qxjFt # nYQ977FqBKyhvhSplR2wwhwi+JpuGWFGlnQTvdF2Z7ni4YCDFcbl4eiMyGwsjbWm # 0VBP+wCSSMIIbS9Qb7DrhZlfu0+wKZK/q0FLzVVofcLSXGou+Mse/qhtG+yAU/FI # qqqV+7J4PU9E4BqFaklxyRtBrpXNDgpo77pu6ZR7oDXD7HNMuIAuEIlkxMJjarNM # xN64WOOzw15R2RMVyXdYx6ccxWft2Q== # =9Gmk # -----END PGP SIGNATURE----- # gpg: Signature made Fri 05 Jul 2024 04:49:05 AM PDT # gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full] * tag 'pull-maintainer-july24-050724-1' of https://gitlab.com/stsquad/qemu: (40 commits) tests/tcg/aarch64: Add MTE gdbstub tests gdbstub: Add support for MTE in user mode gdbstub: Use true to set cmd_startswith gdbstub: Pass CPU context to command handler gdbstub: Make hex conversion function non-internal target/arm: Factor out code for setting MTE TCF0 field target/arm: Make some MTE helpers widely available target/arm: Fix exception case in allocation_tag_mem_probe gdbstub: Add support for target-specific stubs gdbstub: Move GdbCmdParseEntry into a new header file gdbstub: Clean up process_string_cmd accel/tcg: Move qemu_plugin_vcpu_init__async() to plugins/ plugins: Free CPUPluginState before destroying vCPU state plugins: Ensure vCPU index is assigned in init/exit hooks plugins/lockstep: clean-up output plugins/lockstep: mention the one-insn-per-tb option plugins/lockstep: make mixed-mode safe plugins/lockstep: preserve sock_path test/plugins: preserve the instruction record over translations test/plugin: make insn plugin less noisy by default ... Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2024-07-05tests/tcg/aarch64: Add MTE gdbstub testsGustavo Romero
Add tests to exercise the MTE stubs. The tests will only run if a version of GDB that supports MTE is available in the test environment. Signed-off-by: Gustavo Romero <gustavo.romero@linaro.org> [AJB: re-base and checkpatch fixes] Message-Id: <20240628050850.536447-12-gustavo.romero@linaro.org> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20240705084047.857176-41-alex.bennee@linaro.org>