aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-04-05block: push recursive flushing up from driversPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-04-05qemu-io: add option to enable tracingStefan Hajnoczi
It can be useful to enable QEMU tracing when trying out block layer interfaces via qemu-io. Tracing can be enabled using the new -T FILE option where the given file contains a list of trace events to enable (just like the qemu --trace events=FILE option). $ echo qemu_vfree >my-events $ ./qemu-io -T my-events ... Remember to use ./configure --enable-trace-backend=BACKEND when building qemu-io. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-04-05qcow2: Remove unused parameter in get_cluster_table()Kevin Wolf
Since everything goes through the cache, callers don't use the L2 table offset any more. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-04-05tracetool: Forbid argument name 'next'Kevin Wolf
It has happened more than once that patches that look perfectly sane and work with simpletrace broke systemtap because they use 'next' as an argument name for a tracing function. However, 'next' is a keyword for systemtap, so we shouldn't use it. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-04-05trace-events: Rename 'next' argumentKevin Wolf
'next' is a systemtap keyword, so it's a bad idea to use it as an argument name. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2012-04-04Merge branch 's390-for-upstream' of git://repo.or.cz/qemu/agrafBlue Swirl
* 's390-for-upstream' of git://repo.or.cz/qemu/agraf: target-s390x: Update s390x_{tod,cpu}_timer() to use S390CPU target-s390x: QOM'ify CPU init target-s390x: QOM'ify CPU reset target-s390x: QOM'ify CPU
2012-04-04Improve interrupt handling priorityArtyom Tarasenko
The vector interrupt has higher priority than interrupt_level_n. Also check only interrupt_level_n concurency when TL > 0, the traps of other types may be nested. Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-04-04Fix vector interrupt handlingArtyom Tarasenko
Don't produce stray irq 5, don't overwrite ivec_data if still busy with processing of the previous interrupt. Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-04-04target-s390x: Update s390x_{tod,cpu}_timer() to use S390CPUAndreas Färber
In place of CPUS390XState pass S390CPU as opaque from the new initfn. cpu_interrupt() is anticipated to take a CPUState in the future. Signed-off-by: Andreas Färber <afaerber@suse.de> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
2012-04-04target-s390x: QOM'ify CPU initAndreas Färber
Move code from cpu_s390x_init() into an initfn. Signed-off-by: Andreas Färber <afaerber@suse.de> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
2012-04-04target-s390x: QOM'ify CPU resetAndreas Färber
Move code from cpu_state_reset() to s390_cpu_reset(). Signed-off-by: Andreas Färber <afaerber@suse.de> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
2012-04-04target-s390x: QOM'ify CPUAndreas Färber
Embed CPUS390XState as first member of S390CPU. Since -cpu is being ignored, make TYPE_S390_CPU non-abstract. Signed-off-by: Andreas Färber <afaerber@suse.de> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
2012-04-02qdev: put all devices under /machinePaolo Bonzini
Avoid cluttering too much the QOM root. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-02qdev: give all devices a canonical pathPaolo Bonzini
A strong limitation of QOM right now is that unconverted ports (e.g. all...) do not give a canonical path to devices that are part of the board. This in turn makes it impossible to replace PROP_PTR with a QOM link for example. Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-02qdev: add children before qdev_initPaolo Bonzini
We want the composition tree to to be in order by the time we call qdev_init, so that a single set of the toplevel realize property can propagate all the way down the composition tree. This is not the case so far. Unfortunately, this is incompatible with calling qdev_init in the constructor wrappers for devices, so for now we need to unattach some devices that are created through those wrappers. This will be fixed by removing qdev_init and instead setting the toplevel realize property after machine init. Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-02qom: add container_getPaolo Bonzini
This is QOM "mkdir -p". It is useful when referring to container objects such as "/machine". Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-02Merge remote-tracking branch 'kiszka/queues/slirp' into stagingAnthony Liguori
* kiszka/queues/slirp: slirp: Signal free input buffer space to io-thread w32/slirp: Undefine error constants before their redefinition slirp: use socket_set_nonblock slirp: clean up conflicts with system headers
2012-04-02Merge remote-tracking branch 'stefanha/tracing' into stagingAnthony Liguori
* stefanha/tracing: tracetool: dtrace: handle in and next reserved words tracetool: dtrace disabled-events fix Makefile.target: code stp dependency on trace-events
2012-04-02serial: clear LSR.TEMT when populating the TSRAnthony Liguori
We never actually clear the TEMT (transmit sending register empty) flag when populating the TSR. We set the flag, but since it's never cleared, setting it is sort of pointless.. I found this with a unit test case. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-02serial: fix retry logicAnthony Liguori
I'm not sure if the retry logic has ever worked when not using FIFO mode. I found this while writing a test case although code inspection confirms it is definitely broken. The TSR retry logic will never actually happen because it is guarded by an 'if (s->tsr_rety > 0)' but this is the only place that can ever make the variable greater than zero. That effectively makes the retry logic an 'if (0)'. I believe this is a typo and the intention was >= 0. Once this is fixed though, I see double transmits with my test case. This is because in the non FIFO case, serial_xmit may get invoked while LSR.THRE is still high because the character was processed but the retransmit timer was still active. We can handle this by simply checking for LSR.THRE and returning early. It's possible that the FIFO paths also need some attention. Cc: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-02qtest: use qemu_gettimeofday()Anthony Liguori
On linux, qemu_timeval will always be two long ints. On windows, we use our own struct definition. This should fix win64. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-04-01milkymist-vgafb: add missing registerMichael Walle
This bug existed since the first commit. Fortunately, the affected registers have no functionality in qemu. This will only prevent the following warning: milkymist_vgafb: write access to unknown register 0x00000034 Signed-off-by: Michael Walle <michael@walle.cc>
2012-04-01target-lm32: add simple disassemblerMichael Walle
Because binutils disassembler is based on libopcode, this is a rewrite from scratch. Signed-off-by: Michael Walle <michael@walle.cc>
2012-03-31milkymist-sysctl: support for new core versionMichael Walle
The new version introduces the following new registers: - SoC clock frequency: read-only of system clock used on the SoC - debug scratchpad: 8 bit scratchpad register - debug write lock: write once register, without any function on QEMU Signed-off-by: Michael Walle <michael@walle.cc>
2012-03-31target-lm32: init tcg only if availableMichael Walle
Once qtest support for target-lm32 arrives, tcg may be disabled. Signed-off-by: Michael Walle <michael@walle.cc>
2012-03-31tests: fix out-of-tree building for lm32 targetMichael Walle
Signed-off-by: Michael Walle <michael@walle.cc>
2012-03-31Merge branch 'arm-devs.for-upstream' of ↵Blue Swirl
git://git.linaro.org/people/pmaydell/qemu-arm * 'arm-devs.for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm: pl031: switch clock base to rtc_clock pl031: rearm alarm timer upon load arm: switch real-time clocks to rtc_clock omap: switch omap_lpg to vm_clock rtc: add -rtc clock=rt
2012-03-31Merge branch 'qom-cpu-unicore32.v3' of git://github.com/afaerber/qemu-cpuBlue Swirl
* 'qom-cpu-unicore32.v3' of git://github.com/afaerber/qemu-cpu: target-unicore32: Move CPU-dependent init into initfn target-unicore32: QOM'ify CPU target-unicore32: License future contributions under GPLv2+ target-unicore32: Relicense to GPLv2+ MAINTAINERS: Add entry for UniCore32
2012-03-31Merge branch 'target-arm.for-upstream' of ↵Blue Swirl
git://git.linaro.org/people/pmaydell/qemu-arm * 'target-arm.for-upstream' of git://git.linaro.org/people/pmaydell/qemu-arm: ARM: Permit any ARMv6K CPU to read the MVFR0 and MVFR1 VFP registers. target-arm: Minimalistic CPU QOM'ification target-arm: Drop cpu_arm_close()
2012-03-31buildfix: check for old pod2man versionsGerd Hoffmann
Older pod2man don't have a --utf8 switch, check for this in conffigure and use it only when present. Fixes build on RHEL-5. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-03-31Fix conversion from lower to upper case with Turkish localeStefan Weil
Some locale settings let make fail or create wrong results because tr '[:lower:]' '[:upper:]' which is used to convert from lower to upper case depends on the locale. With locale tr_TR.UTF-8, lower case 'i' is not converted to 'I'. This results in wrong entries in config-host.h like these ones: #define CONFIG_QEMU_PREFiX "/usr/local" #define CONFIG_QEMU_BiNDiR "/usr/local/bin" This problem was reported by Emre Ersin. The same problem occurs when configure creates the target specific files config-target.mak. They get wrong declarations: TARGET_CRiS=y TARGET_i386=y TARGET_MiCROBLAZE=y TARGET_MiPS64=y TARGET_MiPS=y TARGET_UNiCORE32=y It is sufficient to restrict the conversion to the characters a-z. Using this explicit range avoids the dependency on the locale settings and is also shorter. v2: POSIX says that 'tr a-z' is unspecified outside of the POSIX locale, so we must set LC_ALL=C to make sure that we are using POSIX (hint from Eric Blake, thanks). Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-03-30qtest: avoid a warning with RTC testBlue Swirl
Avoid this warning on OpenBSD: CC tests/rtc-test.o /src/qemu/tests/rtc-test.c: In function 'check_time': /src/qemu/tests/rtc-test.c:171: warning: format '%ld' expects type 'long int', but argument 2 has type 'time_t' /src/qemu/tests/rtc-test.c:173: warning: format '%ld' expects type 'long int', but argument 2 has type 'time_t' Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-03-30qtest: fix 32-bit buildAnthony Liguori
time_t appears to be an unsigned long so use %ld. Reported-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-30slirp: Signal free input buffer space to io-threadJan Kiszka
This massively accelerates slirp reception speed: If data arrives faster than the guest can read it from the input buffer, the file descriptor for the corresponding socket was taken out of the fdset for select. However, the event of the guest reading enough data from the buffer was not signaled. Thus, the io-thread only noticed this change on the next time-driven poll. Fix this by kicking the io-thread as required. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2012-03-30qtest: fix out of tree buildBlue Swirl
Trace objects are also needed if tracing is enabled. Reviewed-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2012-03-30qtest: add rtc-test test-caseAnthony Liguori
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-30rtc: split out macros into a header file and use in test caseAnthony Liguori
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-30qtest: add C version of test infrastructureAnthony Liguori
This also includes a qtest wrapper script to make it easier to launch qtest tests directly. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-30qtest: add clock managementPaolo Bonzini
This patch combines qtest and -icount together to turn the vm_clock into a source that can be fully managed by the client. To this end new commands clock_step and clock_set are added. Hooking them with libqtest is left as an exercise to the reader. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-30qtest: IRQ interception infrastructurePaolo Bonzini
Since /i440fx/piix3 is being removed from the composition tree, the IO-APIC is placed under /i440fx. This is wrong and should be changed as soon as the /i440fx/piix3 path is put back. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-30qtest: add test frameworkAnthony Liguori
The idea behind qtest is pretty simple. Instead of executing a CPU via TCG or KVM, rely on an external process to send events to the device model that the CPU would normally generate. qtest presents itself as an accelerator. In addition, a new option is added to establish a qtest server (-qtest) that takes a character device. This is what allows the external process to send CPU events to the device model. qtest uses a simple line based protocol to send the events. Documentation of that protocol is in qtest.c. I considered reusing the monitor for this job. Adding interrupts would be a bit difficult. In addition, logging would also be difficult. qtest has extensive logging support. All protocol commands are logged with time stamps using a new command line option (-qtest-log). Logging is important since ultimately, this is a feature for debugging. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-30test makefile overhaulPaolo Bonzini
This introduces new test reporting infrastructure based on gtester and gtester-report. Also, all existing tests are moved to tests/, and tests/Makefile is reorganized to factor out the commonalities in the rules. Signed-off-by: Anthony Liguori <aliguori@linux.vnet.ibm.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2012-03-30tracetool: dtrace: handle in and next reserved wordsAlon Levy
Signed-off-by: Alon Levy <alevy@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-03-30tracetool: dtrace disabled-events fixLee Essen
If there are "disabled" entries in the trace-events file then linetod_nop() is called if the backend is dtrace, it's currently not present. Also equivalent fix for stap. Signed-off-by: Lee Essen <lee.essen@nowonline.co.uk> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-03-30Makefile.target: code stp dependency on trace-eventsAlon Levy
Signed-off-by: Alon Levy <alevy@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
2012-03-30pl031: switch clock base to rtc_clockPaolo Bonzini
This lets the user specify the desired semantics. By default, the RTC will follow adjustments from the host's NTP client, and will remain in sync when the virtual machine is stopped. The previous behavior, which provides determinism with both icount and qtest, remains available with "-rtc clock=vm". pl031 supports migration, so we need to convert the time base from rtc_clock to vm_clock and back for backwards compatibility. (The rtc_clock may not be synchronized on the two machines, especially with savevm/loadvm, so the conversion is needed anyway. And since any time base will do, why not pick the one base that is backwards compatible). Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-03-30pl031: rearm alarm timer upon loadPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-03-30arm: switch real-time clocks to rtc_clockPaolo Bonzini
This lets the user specify the desired semantics. By default, the RTC will follow adjustments from the host's NTP client. "-rtc clock=vm" will improve determinism with both icount and qtest. Finally, the previous behavior is available with "-rtc clock=rt". Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-03-30omap: switch omap_lpg to vm_clockPaolo Bonzini
The output of the pulse generator needs to be deterministic when running in -icount mode, and to remain constant whenever the VM is stopped. So the right clock to use is vm_clock. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2012-03-30rtc: add -rtc clock=rtPaolo Bonzini
This will let people use backwards-compatible semantics for devices that will be affected by the following patches. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-26 12:35:20 +0000