| Age | Commit message (Collapse) | Author |
|---|
|
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
All currently supported distros have vte 0.37 or newer, which is where the
ABI changed from 2.90 to 2.91. So drop support for the older ABI.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Given that TCG is now the only consumer of X86XSaveArea, move the
structure definition and associated offset declarations and checks to a
TCG specific header.
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20210705104632.2902400-9-david.edmondson@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Rather than relying on the X86XSaveArea structure definition,
determine the offset of XSAVE state areas using CPUID leaf 0xd where
possible (KVM and HVF).
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20210705104632.2902400-8-david.edmondson@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Rather than relying on the X86XSaveArea structure definition directly,
the routines that manipulate the XSAVE state area should observe the
offsets declared in the x86_ext_save_areas array.
Currently the offsets declared in the array are derived from the
structure definition, resulting in no functional change.
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20210705104632.2902400-7-david.edmondson@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Provide visibility of the x86_ext_save_areas array and associated type
outside of cpu.c.
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20210705104632.2902400-6-david.edmondson@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
In preparation for removing assumptions about XSAVE area offsets, pass
a buffer pointer and buffer length to the XSAVE helper functions.
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20210705104632.2902400-5-david.edmondson@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Replace the hard-coded size of offsets or structure elements with
defined constants or sizeof().
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20210705104632.2902400-4-david.edmondson@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Rather than having similar but different checks in cpu.h and kvm.c,
move them all to cpu.h.
Message-Id: <20210705104632.2902400-3-david.edmondson@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Declare and use manifest constants for the XSAVE state component
offsets.
Signed-off-by: David Edmondson <david.edmondson@oracle.com>
Message-Id: <20210705104632.2902400-2-david.edmondson@oracle.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This is the patch that has been running on the coverity cronjob
for a few weeks now.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
lm32 has been removed in commit 9d49bcf6992 ("Drop the deprecated
lm32 target"), and unicore32 in 4369223902a ("Drop the deprecated
unicore32 target").
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210619091342.3660495-2-f4bug@amsat.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The sdl and gtk display options support more parameters than currently
documented. Also the "vnc" option got lost during a recent commit,
add it again.
Fixes: ddc717581c ("Add display suboptions to man pages")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210630163231.467987-5-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
It's just a wrapper around the -display ...,window-close=off parameter,
and the name "no-quit" is rather confusing compared to "window-close"
(since there are still other means to quit the emulator), so we should
rather tell our users to use the "window-close" parameter instead.
While we're at it, update the documentation to state that
"-no-quit" is available for GTK, too, not only for SDL.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210630163231.467987-4-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
According to the QAPI schema, there is a "-" and not a "_" between
"window" and "close", and we're also talking about "window-close"
in the long parameter description in qemu-options.hx, so we should
make sure that we rather use the variant with the "-" by default
instead of only allowing the one with the "_" here. The old way
still stays enabled for compatibility, but we deprecate it, so that
we can switch to a QAPIfied parameter one day more easily.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210630163231.467987-3-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The frame parameter has been removed along with the support for
SDL 1.2.
Fixes: 09bd7ba9f5 ("Remove deprecated -no-frame option")
Signed-off-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20210630163231.467987-2-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The wrapper should not be needed here (it's not the shebang line of
a shell script), and it is causing trouble on Haiku where "env"
resides in a different directory.
Reported-by: Richard Zak <richard.j.zak@gmail.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20210705082542.936856-1-thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
'remotes/dgilbert-gitlab/tags/pull-migration-20210705a' into staging
Migration and virtiofs pull 2021-07-01 v2
Dropped Peter Xu's migration-test fix to reenable
most of the migration tests when uffd isn't available;
we're seeing at least one seg in github CI (on qemu-system-i386)
and Peter Maydell is reporting a hang on Openbsd.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# gpg: Signature made Mon 05 Jul 2021 11:01:35 BST
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert-gitlab/tags/pull-migration-20210705a:
migration/rdma: Use error_report to suppress errno message
tests/migration: fix "downtime_limit" type when "migrate-set-parameters"
tests/migration: parse the thread-id key of CpuInfoFast
virtiofsd: Add an option to enable/disable posix acls
virtiofsd: Switch creds, drop FSETID for system.posix_acl_access xattr
virtiofsd: Add capability to change/restore umask
virtiofsd: Add umask to seccom allow list
virtiofsd: Add support for extended setxattr
virtiofsd: Fix xattr operations overwriting errno
virtiofsd: Fix fuse setxattr() API change issue
virtiofsd: Don't allow file creation with FUSE_OPEN
docs: describe the security considerations with virtiofsd xattr mapping
virtiofsd: use GDateTime for formatting timestamp for debug messages
migration: failover: continue to wait card unplug on error
migration: move wait-unplug loop to its own function
migration: Allow reset of postcopy_recover_triggered when failed
migration: Move yank outside qemu_start_incoming_migration()
migration: fix the memory overwriting risk in add_to_iovec
tests: migration-test: Add dirty ring test
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Since the prior calls are successful, in this case a errno doesn't
indicate a real error which would just make us confused.
before:
(qemu) migrate -d rdma:192.168.22.23:8888
source_resolve_host RDMA Device opened: kernel name rxe_eth0 uverbs device name uverbs2, infiniband_verbs class device path /sys/class/infiniband_verbs/uverbs2, infiniband class device path /sys/class/infiniband/rxe_eth0, transport: (2) Ethernet
rdma_get_cm_event != EVENT_ESTABLISHED after rdma_connect: No space left on device
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Message-Id: <20210628071959.23455-1-lizhijian@cn.fujitsu.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
migrate-set-parameters parse "downtime_limit" as integer type when
execute "migrate-set-parameters" before migration, and, the unit
dowtime_limit is milliseconds, fix this two so that test can go
smoothly.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Message-Id: <31d82df24cc0c468dbe4d2d86730158ebf248071.1622729934.git.huangy81@chinatelecom.cn>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
thread_id in CpuInfoFast is deprecated, parse thread-id instead
after execute qmp query-cpus-fast. fix this so that test can
go smoothly.
Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn>
Message-Id: <584578c0a0dd781cee45f72ddf517f6e6a41c504.1622729934.git.huangy81@chinatelecom.cn>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
fuse has an option FUSE_POSIX_ACL which needs to be opted in by fuse
server to enable posix acls. As of now we are not opting in for this,
so posix acls are disabled on virtiofs by default.
Add virtiofsd option "-o posix_acl/no_posix_acl" to let users enable/disable
posix acl support. By default it is disabled as of now due to performance
concerns with cache=none.
Currently even if file server has not opted in for FUSE_POSIX_ACL, user can
still query acl and set acl, and system.posix_acl_access and
system.posix_acl_default xattrs show up listxattr response.
Miklos said this is confusing. So he said lets block and filter
system.posix_acl_access and system.posix_acl_default xattrs in
getxattr/setxattr/listxattr if user has explicitly disabled
posix acls using -o no_posix_acl.
As of now continuing to keeping the existing behavior if user did not
specify any option to disable acl support due to concerns about backward
compatibility.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Message-Id: <20210622150852.1507204-8-vgoyal@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
When posix access acls are set on a file, it can lead to adjusting file
permissions (mode) as well. If caller does not have CAP_FSETID and it
also does not have membership of owner group, this will lead to clearing
SGID bit in mode.
Current fuse code is written in such a way that it expects file server
to take care of chaning file mode (permission), if there is a need.
Right now, host kernel does not clear SGID bit because virtiofsd is
running as root and has CAP_FSETID. For host kernel to clear SGID,
virtiofsd need to switch to gid of caller in guest and also drop
CAP_FSETID (if caller did not have it to begin with).
If SGID needs to be cleared, client will set the flag
FUSE_SETXATTR_ACL_KILL_SGID in setxattr request. In that case server
should kill sgid.
Currently just switch to uid/gid of the caller and drop CAP_FSETID
and that should do it.
This should fix the xfstest generic/375 test case.
We don't have to switch uid for this to work. That could be one optimization
that pass a parameter to lo_change_cred() to only switch gid and not uid.
Also this will not work whenever (if ever) we support idmapped mounts. In
that case it is possible that uid/gid in request are 0/0 but still we
need to clear SGID. So we will have to pick a non-root sgid and switch
to that instead. That's an TODO item for future when idmapped mount
support is introduced.
This patch only adds the capability to switch creds and drop FSETID
when acl xattr is set. This does not take affect yet. It can take
affect when next patch adds the capability to enable posix_acl.
Reported-by: Luis Henriques <lhenriques@suse.de>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Message-Id: <20210622150852.1507204-7-vgoyal@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
When parent directory has default acl and a file is created in that
directory, then umask is ignored and final file permissions are
determined using default acl instead. (man 2 umask).
Currently, fuse applies the umask and sends modified mode in create
request accordingly. fuse server can set FUSE_DONT_MASK and tell
fuse client to not apply umask and fuse server will take care of
it as needed.
With posix acls enabled, requirement will be that we want umask
to determine final file mode if parent directory does not have
default acl.
So if posix acls are enabled, opt in for FUSE_DONT_MASK. virtiofsd
will set umask of the thread doing file creation. And host kernel
should use that umask if parent directory does not have default
acls, otherwise umask does not take affect.
Miklos mentioned that we already call unshare(CLONE_FS) for
every thread. That means umask has now become property of per
thread and it should be ok to manipulate it in file creation path.
This patch only adds capability to change umask and restore it. It
does not enable it yet. Next few patches will add capability to enable it
based on if user enabled posix_acl or not.
This should fix fstest generic/099.
Reported-by: Luis Henriques <lhenriques@suse.de>
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210622150852.1507204-6-vgoyal@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Patches in this series are going to make use of "umask" syscall.
So allow it.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210622150852.1507204-5-vgoyal@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Add the bits to enable support for setxattr_ext if fuse offers it. Do not
enable it by default yet. Let passthrough_ll opt-in. Enabling it by deafult
kind of automatically means that you are taking responsibility of clearing
SGID if ACL is set.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Message-Id: <20210622150852.1507204-4-vgoyal@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fixed up double def in fuse_common.h
|
|
getxattr/setxattr/removexattr/listxattr operations handle regualar
and non-regular files differently. For the case of non-regular files
we do fchdir(/proc/self/fd) and the xattr operation and then revert
back to original working directory. After this we are saving errno
and that's buggy because fchdir() will overwrite the errno.
FCHDIR_NOFAIL(lo->proc_self_fd);
ret = getxattr(procname, name, value, size);
FCHDIR_NOFAIL(lo->root.fd);
if (ret == -1)
saverr = errno
In above example, if getxattr() failed, we will still return 0 to caller
as errno must have been written by FCHDIR_NOFAIL(lo->root.fd) call.
Fix all such instances and capture "errno" early and save in "saverr"
variable.
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Message-Id: <20210622150852.1507204-3-vgoyal@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
With kernel header updates fuse_setxattr_in struct has grown in size.
But this new struct size only takes affect if user has opted in
for fuse feature FUSE_SETXATTR_EXT otherwise fuse continues to
send "fuse_setxattr_in" of older size. Older size is determined
by FUSE_COMPAT_SETXATTR_IN_SIZE.
Fix this. If we have not opted in for FUSE_SETXATTR_EXT, then
expect that we will get fuse_setxattr_in of size FUSE_COMPAT_SETXATTR_IN_SIZE
and not sizeof(struct fuse_sexattr_in).
Fixes: 278f064e4524 ("Update Linux headers to 5.13-rc4")
Signed-off-by: Vivek Goyal <vgoyal@redhat.com>
Message-Id: <20210622150852.1507204-2-vgoyal@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Greg Kurz <groug@kaod.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
A well behaved FUSE client uses FUSE_CREATE to create files. It isn't
supposed to pass O_CREAT along a FUSE_OPEN request, as documented in
the "fuse_lowlevel.h" header :
/**
* Open a file
*
* Open flags are available in fi->flags. The following rules
* apply.
*
* - Creation (O_CREAT, O_EXCL, O_NOCTTY) flags will be
* filtered out / handled by the kernel.
But if the client happens to do it anyway, the server ends up passing
this flag to open() without the mandatory mode_t 4th argument. Since
open() is a variadic function, glibc will happily pass whatever it
finds on the stack to the syscall. If this file is compiled with
-D_FORTIFY_SOURCE=2, glibc will even detect that and abort:
*** invalid openat64 call: O_CREAT or O_TMPFILE without mode ***: terminated
Specifying O_CREAT with FUSE_OPEN is a protocol violation. Check this
in do_open(), print out a message and return an error to the client,
EINVAL like we already do when fuse_mbuf_iter_advance() fails.
The FUSE filesystem doesn't currently support O_TMPFILE, but the very
same would happen if O_TMPFILE was passed in a FUSE_OPEN request. Check
that as well.
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20210624101809.48032-1-groug@kaod.org>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Different guest xattr prefixes have distinct access control rules applied
by the guest. When remapping a guest xattr care must be taken that the
remapping does not allow the a guest user to bypass guest kernel access
control rules.
For example if 'trusted.*' which requires CAP_SYS_ADMIN is remapped
to 'user.virtiofs.trusted.*', an unprivileged guest user which can
write to 'user.*' can bypass the CAP_SYS_ADMIN control. Thus the
target of any remapping must be explicitly blocked from read/writes
by the guest, to prevent access control bypass.
The examples shown in the virtiofsd man page already do the right
thing and ensure safety, but the security implications of getting
this wrong were not made explicit. This could lead to host admins
and apps unwittingly creating insecure configurations.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20210611120427.49736-1-berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
The GDateTime APIs provided by GLib avoid portability pitfalls, such
as some platforms where 'struct timeval.tv_sec' field is still 'long'
instead of 'time_t'. When combined with automatic cleanup, GDateTime
often results in simpler code too.
Localtime is changed to UTC to avoid the need to grant extra seccomp
permissions for GLib's access of the timezone database.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210611164319.67762-1-berrange@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
If the user cancels the migration in the unplug-wait state,
QEMU will try to plug back the card and this fails because the card
is partially unplugged.
To avoid the problem, continue to wait the card unplug, but to
allow the migration to be canceled if the card never finishes to unplug
use a timeout.
Bug: https://bugzilla.redhat.com/show_bug.cgi?id=1976852
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210629155007.629086-3-lvivier@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
The loop is used in migration_thread() and bg_migration_thread(),
so we can move it to its own function and call it from these both places.
Moreover, in migration_thread() we have a wrong state transition from
SETUP to ACTIVE while state could be WAIT_UNPLUG. This is correctly
managed in bg_migration_thread() so use this code instead.
Signed-off-by: Laurent Vivier <lvivier@redhat.com>
Message-Id: <20210629155007.629086-2-lvivier@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
It's possible qemu_start_incoming_migration() failed at any point, when it
happens we should reset postcopy_recover_triggered to false so that the user
can still retry with a saner incoming port.
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210629181356.217312-3-peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Starting from commit b5eea99ec2f5c, qmp_migrate_recover() calls unregister
before calling qemu_start_incoming_migration(). I believe it wanted to mitigate
the next call to yank_register_instance(), but I think that's wrong.
Firstly, if during recover, we should keep the yank instance there, not
"quickly removing and adding it back".
Meanwhile, calling qmp_migrate_recover() twice with b5eea99ec2f5c will directly
crash the dest qemu (right now it can't; but it'll start to work right after
the next patch) because the 1st call of qmp_migrate_recover() will unregister
permanently when the channel failed to establish, then the 2nd call of
qmp_migrate_recover() crashes at yank_unregister_instance().
This patch fixes it by moving yank ops out of qemu_start_incoming_migration()
into qmp_migrate_incoming. For qmp_migrate_recover(), drop the unregister of
yank instance too since we keep it there during the recovery phase.
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210629181356.217312-2-peterx@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
When testing migration, a Segmentation fault qemu core is generated.
0 error_free (err=0x1)
1 0x00007f8b862df647 in qemu_fclose (f=f@entry=0x55e06c247640)
2 0x00007f8b8516d59a in migrate_fd_cleanup (s=s@entry=0x55e06c0e1ef0)
3 0x00007f8b8516d66c in migrate_fd_cleanup_bh (opaque=0x55e06c0e1ef0)
4 0x00007f8b8626a47f in aio_bh_poll (ctx=ctx@entry=0x55e06b5a16d0)
5 0x00007f8b8626e71f in aio_dispatch (ctx=0x55e06b5a16d0)
6 0x00007f8b8626a33d in aio_ctx_dispatch (source=<optimized out>, callback=<optimized out>, user_data=<optimized out>)
7 0x00007f8b866bdba4 in g_main_context_dispatch ()
8 0x00007f8b8626cde9 in glib_pollfds_poll ()
9 0x00007f8b8626ce62 in os_host_main_loop_wait (timeout=<optimized out>)
10 0x00007f8b8626cffd in main_loop_wait (nonblocking=nonblocking@entry=0)
11 0x00007f8b862ef01f in main_loop ()
Using gdb print the struct QEMUFile f = {
...,
iovcnt = 65, last_error = 21984,
last_error_obj = 0x1, shutdown = true
}
Well iovcnt is overflow, because the max size of MAX_IOV_SIZE is 64.
struct QEMUFile {
...;
struct iovec iov[MAX_IOV_SIZE];
unsigned int iovcnt;
int last_error;
Error *last_error_obj;
bool shutdown;
};
iovcnt and last_error is overwrited by add_to_iovec().
Right now, add_to_iovec() increase iovcnt before check the limit.
And it seems that add_to_iovec() assumes that iovcnt will set to zero
in qemu_fflush(). But qemu_fflush() will directly return when f->shutdown
is true.
The situation may occur when libvirtd restart during migration, after
f->shutdown is set, before calling qemu_file_set_error() in
qemu_file_shutdown().
So the safiest way is checking the iovcnt before increasing it.
Signed-off-by: Feng Lin <linfeng23@huawei.com>
Message-Id: <20210625062138.1899-1-linfeng23@huawei.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Fix typo in 'writeable' which is actually misnamed 'writable'
|
|
Add dirty ring test if kernel supports it. Add the dirty ring parameter on
source should be mostly enough, but let's change the dest too to make them
match always.
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Message-Id: <20210615175523.439830-3-peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
staging
PVRDMA queue
Several CVE fixes for the PVRDMA device.
# gpg: Signature made Sun 04 Jul 2021 20:56:05 BST
# gpg: using RSA key 36D4C0F0CF2FE46D
# gpg: Good signature from "Marcel Apfelbaum <marcel.apfelbaum@zoho.com>" [marginal]
# gpg: aka "Marcel Apfelbaum <marcel@redhat.com>" [marginal]
# gpg: aka "Marcel Apfelbaum <marcel.apfelbaum@gmail.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: B1C6 3A57 F92E 08F2 640F 31F5 36D4 C0F0 CF2F E46D
* remotes/marcel/tags/pvrdma-04-07-2021-v2:
pvrdma: Fix the ring init error flow (CVE-2021-3608)
pvrdma: Ensure correct input on ring init (CVE-2021-3607)
hw/rdma: Fix possible mremap overflow in the pvrdma device (CVE-2021-3582)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Do not unmap uninitialized dma addresses.
Fixes: CVE-2021-3608
Reviewed-by: VictorV (Kunlun Lab) <vv474172261@gmail.com>
Tested-by: VictorV (Kunlun Lab) <vv474172261@gmail.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Message-Id: <20210630115246.2178219-1-marcel@redhat.com>
Tested-by: Yuval Shaia <yuval.shaia.ml@gmail.com>
Reviewed-by: Yuval Shaia <yuval.shaia.ml@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
|
|
Check the guest passed a non zero page count
for pvrdma device ring buffers.
Fixes: CVE-2021-3607
Reported-by: VictorV (Kunlun Lab) <vv474172261@gmail.com>
Reviewed-by: VictorV (Kunlun Lab) <vv474172261@gmail.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Message-Id: <20210630114634.2168872-1-marcel@redhat.com>
Reviewed-by: Yuval Shaia <yuval.shaia.ml@gmail.com>
Tested-by: Yuval Shaia <yuval.shaia.ml@gmail.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
|
|
Ensure mremap boundaries not trusting the guest kernel to
pass the correct buffer length.
Fixes: CVE-2021-3582
Reported-by: VictorV (Kunlun Lab) <vv474172261@gmail.com>
Tested-by: VictorV (Kunlun Lab) <vv474172261@gmail.com>
Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
Message-Id: <20210616110600.20889-1-marcel.apfelbaum@gmail.com>
Reviewed-by: Yuval Shaia <yuval.shaia.ml@gmail.com>
Tested-by: Yuval Shaia <yuval.shaia.ml@gmail.com>
Reviewed-by: Prasad J Pandit <pjp@fedoraproject.org>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
|
|
MIPS patches queue
- Extract nanoMIPS, microMIPS, Code Compaction from translate.c
- Allow PCI config accesses smaller than 32-bit on Bonito64 device
- Fix migration of g364fb device on Jazz Magnum
- Fix dp8393x PROM checksum on Jazz Magnum and Quadra 800
- Map the UART devices unconditionally on Jazz Magnum
- Add functional test booting Linux on the Fuloong 2E
# gpg: Signature made Fri 02 Jul 2021 16:36:19 BST
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
# Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE
* remotes/philmd/tags/mips-20210702:
hw/mips/jazz: Map the UART devices unconditionally
hw/mips/jazz: specify correct endian for dp8393x device
hw/m68k/q800: fix PROM checksum and MAC address storage
qemu/bitops.h: add bitrev8 implementation
dp8393x: remove onboard PROM containing MAC address and checksum
hw/m68k/q800: move PROM and checksum calculation from dp8393x device to board
hw/mips/jazz: move PROM and checksum calculation from dp8393x device to board
dp8393x: convert to trace-events
dp8393x: checkpatch fixes
g364fb: add VMStateDescription for G364SysBusState
g364fb: use RAM memory region for framebuffer
tests/acceptance: Test Linux on the Fuloong 2E machine
hw/pci-host/bonito: Allow PCI config accesses smaller than 32-bit
hw/pci-host/bonito: Trace PCI config accesses smaller than 32-bit
target/mips: Extract nanoMIPS ISA translation routines
target/mips: Extract the microMIPS ISA translation routines
target/mips: Extract Code Compaction ASE translation routines
target/mips: Add declarations for generic TCG helpers
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
'remotes/pmaydell/tags/pull-target-arm-20210702' into staging
target-arm queue:
* more MVE instructions
* hw/gpio/gpio_pwr: use shutdown function for reboot
* target/arm: Check NaN mode before silencing NaN
* tests: Boot and halt a Linux guest on the Raspberry Pi 2 machine
* hw/arm: Add basic power management to raspi.
* docs/system/arm: Add quanta-gbs-bmc, quanta-q7l1-bmc
# gpg: Signature made Fri 02 Jul 2021 13:59:19 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20210702: (24 commits)
target/arm: Implement MVE shifts by register
target/arm: Implement MVE shifts by immediate
target/arm: Implement MVE long shifts by register
target/arm: Implement MVE long shifts by immediate
target/arm: Implement MVE VADDLV
target/arm: Implement MVE VSHLC
target/arm: Implement MVE saturating narrowing shifts
target/arm: Implement MVE VSHRN, VRSHRN
target/arm: Implement MVE VSRI, VSLI
target/arm: Implement MVE VSHLL
target/arm: Implement MVE vector shift right by immediate insns
target/arm: Implement MVE vector shift left by immediate insns
target/arm: Implement MVE logical immediate insns
target/arm: Use dup_const() instead of bitfield_replicate()
target/arm: Use asimd_imm_const for A64 decode
target/arm: Make asimd_imm_const() public
target/arm: Fix bugs in MVE VRMLALDAVH, VRMLSLDAVH
target/arm: Fix MVE widening/narrowing VLDR/VSTR offset calculation
hw/gpio/gpio_pwr: use shutdown function for reboot
target/arm: Check NaN mode before silencing NaN
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
When using the Magnum ARC firmware we can see accesses to the
UART1 being rejected, because the device is not mapped:
$ qemu-system-mips64el -M magnum -d guest_errors,unimp -bios NTPROM.RAW
Invalid access at addr 0x80007004, size 1, region '(null)', reason: rejected
Invalid access at addr 0x80007001, size 1, region '(null)', reason: rejected
Invalid access at addr 0x80007002, size 1, region '(null)', reason: rejected
Invalid access at addr 0x80007003, size 1, region '(null)', reason: rejected
Invalid access at addr 0x80007004, size 1, region '(null)', reason: rejected
Since both UARTs are present (soldered on the board) regardless
of whether there are character devices connected, map them
unconditionally.
(This code pre-dated commit 12051d82f004 which made it safe to pass
NULL in as a chardev to serial devices.)
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20210629053704.2584504-1-f4bug@amsat.org>
|
|
The MIPS magnum machines are available in both big endian (mips64) and little
endian (mips64el) configurations. Ensure that the dp893x big_endian property
is set accordingly using logic similar to that used for the MIPS malta
machines.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@linux-m68k.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20210625065401.30170-11-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
|
The checksum used by MacOS to validate the PROM content is an exclusive-OR
rather than a sum over the corresponding bytes. In addition the MAC address
must be stored in bit-reversed format as indicated in comments in Linux's
macsonic.c.
With the PROM contents fixed MacOS starts to probe the device registers
when AppleTalk is enabled in the Control Panel.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Finn Thain <fthain@linux-m68k.org>
Message-Id: <20210625065401.30170-8-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
|
