aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-11-16vhost-user: update spec descriptionMichael S. Tsirkin
Clarify logging setup to make sure all clients comply in a way that is future-proof. Document how rings are started/stopped. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Victor Kaplansky <victork@redhat.com>
2015-11-16vhost: don't send RESET_OWNER at stopYuanhan Liu
First of all, RESET_OWNER message is sent incorrectly, as it's sent before GET_VRING_BASE. And the reset message would let the later call get nothing correct. And, sending SET_VRING_ENABLE at stop, which has already been done, makes more sense than RESET_OWNER. Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-11-16vhost: let SET_VRING_ENABLE message depends on protocol featureYuanhan Liu
But not depend on PROTOCOL_F_MQ feature bit. So that we could use SET_VRING_ENABLE to sign the backend on stop, even if MQ is disabled. That's reasonable, since we will have one queue pair at least. Signed-off-by: Yuanhan Liu <yuanhan.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-11-13Update version for v2.5.0-rc0 releasev2.5.0-rc0Peter Maydell
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-12hw/misc: Add support for ADC controller in Xilinx Zynq 7000Guenter Roeck
Add support for the Xilinx XADC core used in Zynq 7000. References: - Zynq-7000 All Programmable SoC Technical Reference Manual - 7 Series FPGAs and Zynq-7000 All Programmable SoC XADC Dual 12-Bit 1 MSPS Analog-to-Digital Converter Tested with Linux using QEMU machine xilinx-zynq-a9 with devicetree files zynq-zc702.dtb and zynq-zc706.dtb, and kernel configuration multi_v7_defconfig. Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Guenter Roeck <linux@roeck-us.net> [ PC changes: * Changed macro names to match TRM where possible * Made programmers model macro scheme consistent * Dropped XADC_ZYNQ_ prefix on local macros * Fix ALM field width * Update threshold-comparison interrupts in _update_ints() * factored out DFIFO pushes into helper. Renamed to "push/pop" * Changed xadc_reg to 10 bits and added OOB check. * Reduced scope of MCTL reset to just stop channel coms. * Added dummy read data to write commands * Changed _ to - seperators in string names and filenames * Dropped ------------ in header comment * Catchall'ed _update_ints() in _write handler. * Minor whitespace changes. * Use ZYNQ_XADC_FIFO_DEPTH instead of ARRAY_SIZE() ] Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Tested-by: Guenter Roeck <linux@roeck-us.net> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-12Merge remote-tracking branch 'remotes/juanquintela/tags/migration/20151112' ↵Peter Maydell
into staging migration/next for 20151112 # gpg: Signature made Thu 12 Nov 2015 16:56:44 GMT using RSA key ID 5872D723 # gpg: Good signature from "Juan Quintela <quintela@redhat.com>" # gpg: aka "Juan Quintela <quintela@trasno.org>" * remotes/juanquintela/tags/migration/20151112: migration_init: Fix lock initialisation/make it explicit migrate-start-postcopy: Improve text Postcopy: Fix TP!=HP zero case Finish non-postcopiable iterative devices before package migration: Make 32bit linux compile with RDMA migration: print ram_addr_t as RAM_ADDR_FMT not %zx Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-12Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell
Block layer patches (rebased Stefan's pull request) # gpg: Signature made Thu 12 Nov 2015 15:34:16 GMT using RSA key ID C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" * remotes/kevin/tags/for-upstream: (43 commits) block: Update copyright of the accounting code scsi-disk: Account for failed operations macio: Account for failed operations ide: Account for failed and invalid operations atapi: Account for failed and invalid operations xen_disk: Account for failed and invalid operations virtio-blk: Account for failed and invalid operations nvme: Account for failed and invalid operations iotests: Add test for the block device statistics block: Use QEMU_CLOCK_VIRTUAL for the accounting code in qtest mode qemu-io: Account for failed, invalid and flush operations block: New option to define the intervals for collecting I/O statistics block: Add average I/O queue depth to BlockDeviceTimedStats block: Compute minimum, maximum and average I/O latencies block: Allow configuring whether to account failed and invalid ops block: Add statistics for failed and invalid I/O operations block: Add idle_time_ns to BlockDeviceStats util: Infrastructure for computing recent averages block: define 'clock_type' for the accounting code ide: Account for write operations correctly ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-12migration_init: Fix lock initialisation/make it explicitDr. David Alan Gilbert
Peter reported a lock error on MacOS after my a82d593b patch. migrate_get_current does one-time initialisation of a bunch of variables. migrate_init does reinitialisation even on a 2nd migrate after a cancel. The problem here was that I'd initialised the mutex in migrate_get_current, and the memset in migrate_init corrupted it. Remove the memset and replace it by explicit initialisation of fields that need initialising; this also turns out to be simpler than the old code that had to preserve some fields. Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Fixes: a82d593b Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-12migrate-start-postcopy: Improve textDr. David Alan Gilbert
Improve the text in both the qapi-schema and hmp help to point out you need to set the postcopy-ram capability prior to issuing migrate-start-postcopy. Also fix the text of the migrate_start_postcopy error that deals with capabilities. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Acked-by: Jason J. Herne <jjherne@linux.vnet.ibm.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-12configure: check for $cxx before useJohn Snow
I broke this when adding checks for clang++. Reported-by: Laurent Vivier <lvivier@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1447345789-840-1-git-send-email-jsnow@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-12Postcopy: Fix TP!=HP zero caseDr. David Alan Gilbert
Where the target page size is different from the host page we special case it, but I messed up on the zero case check. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-12Finish non-postcopiable iterative devices before packageDr. David Alan Gilbert
Where we have iterable, but non-postcopiable devices (e.g. htab or block migration), complete them before forming the 'package' but with the CPUs stopped. This stops them filling up the package. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2015-11-12migration: Make 32bit linux compile with RDMAJuan Quintela
Rest of the file already use that trick. 64bit offsets make no sense in 32bit archs, but that is ram_addr_t for you. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2015-11-12migration: print ram_addr_t as RAM_ADDR_FMT not %zxJuan Quintela
Not all the wold is 64bits (yet). Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2015-11-12target-arm: Update PC before calling gen_helper_check_breakpoints()Sergey Fedorov
PC should be updated in the CPU state before calling check_breakpoints() helper. Otherwise, the helper would not see the correct PC in the CPU state if it is not at the start of a TB. Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com> Message-id: 1447176222-16401-1-git-send-email-serge.fdrv@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-12Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
virtio, vhost: fixes for 2.5 This fixes a performance regression with virtio 1, and makes device stop/start more robust for vhost-user. virtio devices on pcie bus now have pcie and pm capability, as required by the PCI Express spec. migration now works better with virtio 9p. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Thu 12 Nov 2015 14:40:42 GMT using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: virtio-9p: add savem handlers hw/virtio: Add PCIe capability to virtio devices vhost: send SET_VRING_ENABLE at start/stop vhost: rename RESET_DEVICE backto RESET_OWNER vhost-user: modify SET_LOG_BASE to pass mmap size and offset virtio-pci: unbreak queue_enable read virtio-pci: introduce pio notification capability for modern device virtio-pci: use zero length mmio eventfd for 1.0 notification cap when possible KVM: add support for any length io eventfd memory: don't try to adjust endianness for zero length eventfd virtio-pci: fix 1.0 virtqueue migration Conflicts: include/hw/compat.h [Fixed a trivial merge conflict in compat.h] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-11-12block: Update copyright of the accounting codeAlberto Garcia
Signed-off-by: Alberto Garcia <berto@igalia.com> Message-id: 80a2278e3ec2dafd5daab20a7cb2d6a9b83371e4.1446044838.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12scsi-disk: Account for failed operationsAlberto Garcia
Signed-off-by: Alberto Garcia <berto@igalia.com> Message-id: 0ead7b0e59c22926e033ca12725e3a31985ec46b.1446044838.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12macio: Account for failed operationsAlberto Garcia
Signed-off-by: Alberto Garcia <berto@igalia.com> Message-id: ee6f4fde6a7c1071ca96d4ddd53e4934ff812fcd.1446044838.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12ide: Account for failed and invalid operationsAlberto Garcia
Signed-off-by: Alberto Garcia <berto@igalia.com> Message-id: bf4d6c9c563877e699b0bf42e7eaf8b096c4a35e.1446044838.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12atapi: Account for failed and invalid operationsAlberto Garcia
Signed-off-by: Alberto Garcia <berto@igalia.com> Message-id: 59dee4e2921b0c79d41c49b67dfb93d32db9f7f9.1446044838.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12xen_disk: Account for failed and invalid operationsAlberto Garcia
Signed-off-by: Alberto Garcia <berto@igalia.com> Message-id: e0cbb96cb0e1f86c37c7ce332efdf02b57b9d365.1446044838.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12virtio-blk: Account for failed and invalid operationsAlberto Garcia
Signed-off-by: Alberto Garcia <berto@igalia.com> Message-id: 4f623ce52c9d673d35a043fc2959526b41b685c6.1446044838.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12nvme: Account for failed and invalid operationsAlberto Garcia
Signed-off-by: Alberto Garcia <berto@igalia.com> Message-id: 678dc67da229759d404b44f7cc2bf5ed8bf8ad14.1446044838.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12iotests: Add test for the block device statisticsAlberto Garcia
Signed-off-by: Alberto Garcia <berto@igalia.com> Message-id: 0fb8501bbf3666b3d5d3f67fa899729c88f21baf.1446044838.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12block: Use QEMU_CLOCK_VIRTUAL for the accounting code in qtest modeAlberto Garcia
This patch switches to QEMU_CLOCK_VIRTUAL for the accounting code in qtest mode, and makes the latency of the operation constant. This way we can perform tests on the accounting code with reproducible results. Signed-off-by: Alberto Garcia <berto@igalia.com> Message-id: 35ed0501450fa572684e9b5e92c361ab6cce565b.1446044838.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12qemu-io: Account for failed, invalid and flush operationsAlberto Garcia
Signed-off-by: Alberto Garcia <berto@igalia.com> Message-id: 78a7662a8636e55991737ece50003a2dc5a5f3e0.1446044838.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12block: New option to define the intervals for collecting I/O statisticsAlberto Garcia
The BlockAcctStats structure contains a list of BlockAcctTimedStats. Each one of these collects statistics about the minimum, maximum and average latencies of all I/O operations in a certain interval of time. This patch adds a new "stats-intervals" option that allows defining these intervals. Signed-off-by: Alberto Garcia <berto@igalia.com> Message-id: 41cbcd334a61c6157f0f495cdfd21eff6c156f2a.1446044837.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12block: Add average I/O queue depth to BlockDeviceTimedStatsAlberto Garcia
This patch adds two new fields to BlockDeviceTimedStats that track the average number of pending read and write requests for a block device. The values are calculated for the period of time defined for that interval. Signed-off-by: Alberto Garcia <berto@igalia.com> Message-id: fd31fef53e2714f2f30d59ed58ca2f67ec9ab926.1446044837.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12block: Compute minimum, maximum and average I/O latenciesAlberto Garcia
This patch keeps track of the minimum, maximum and average latencies of I/O operations during a certain interval of time. The values are exposed in the BlockDeviceTimedStats structure. An option to define the intervals to collect these statistics will be added in a separate patch. Signed-off-by: Alberto Garcia <berto@igalia.com> Message-id: c7382dc89622c64f918d09f32815827772628f8e.1446044837.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12block: Allow configuring whether to account failed and invalid opsAlberto Garcia
This patch adds two options, "stats-account-invalid" and "stats-account-failed", that can be used to decide whether invalid and failed I/O operations must be used when collecting statistics for latency and last access time. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: ebc7e5966511a342cad428a392c5f5ad56b15213.1446044837.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12block: Add statistics for failed and invalid I/O operationsAlberto Garcia
This patch adds the block_acct_failed() and block_acct_invalid() functions to allow keeping track of failed and invalid I/O operations. The number of failed and invalid operations is exposed in BlockDeviceStats. We don't keep track of the time spent on invalid operations because they are cancelled immediately when they are started. Signed-off-by: Alberto Garcia <berto@igalia.com> Message-id: a7256ccb883a86356b1c6c46b5a29ed5448546a5.1446044837.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12block: Add idle_time_ns to BlockDeviceStatsAlberto Garcia
This patch adds the new field 'idle_time_ns' to the BlockDeviceStats structure, indicating the time that has passed since the previous I/O operation. It also adds the block_acct_idle_time_ns() call, to ensure that all references to the clock type used for accounting are in the same place. This will later allow us to use a different clock for iotests. Signed-off-by: Alberto Garcia <berto@igalia.com> Message-id: 7d8cfcf931453e1a2443e6626e8c1edc347c7c8a.1446044837.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12util: Infrastructure for computing recent averagesAlberto Garcia
This module computes the average of a set of values within a time window, keeping also track of the minimum and maximum values. In order to produce more accurate results it works internally by creating two time windows of the same period, offsetted by half of that period. Values are accounted on both windows and the data is always returned from the oldest one. [Add missing util/replay.o to test-timed-average dependencies to fix the build. --Stefan] Signed-off-by: Alberto Garcia <berto@igalia.com> Message-id: 201b09c21bbc9c329779d2b2365ee2b9c80dceeb.1446044837.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12block: define 'clock_type' for the accounting codeAlberto Garcia
Its value is still QEMU_CLOCK_REALTIME, but having it in a variable will allow us to change its value easily in the future when running in qtest mode. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 547485eb841cf9e3b2770c96539ae9ae5996e214.1446044837.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12ide: Account for write operations correctlyAlberto Garcia
Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 2e71323c0875c2b66a8ae22229545e0c013af8d4.1446044837.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12xen_disk: Account for flush operationsAlberto Garcia
Currently both BLKIF_OP_WRITE and BLKIF_OP_FLUSH_DISKCACHE are being accounted as write operations. Signed-off-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 7a2a14e3ac62027aa6267a6c02abc70717be9c0a.1446044837.git.berto@igalia.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12tests: add BlockJobTxn unit testStefan Hajnoczi
The BlockJobTxn unit test verifies that both single jobs and pairs of jobs behave as a transaction group. Either all jobs complete successfully or the group is cancelled. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1446765200-3054-15-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12iotests: 124 - transactional failure testJohn Snow
Use a transaction to request an incremental backup across two drives. Coerce one of the jobs to fail, and then re-run the transaction. Verify that no bitmap data was lost due to the partial transaction failure. To support the 'err-cancel' QMP argument name it's necessary for transaction_action() to convert underscores in Python argument names to hyphens for QMP argument names. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1446765200-3054-14-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12block: add transactional propertiesJohn Snow
Add both transactional properties to the QMP transactional interface, and add the BlockJobTxn that we create as a result of the err-cancel property to the BlkActionState structure. [split up from a patch originally by Stefan and Fam. --js] Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1446765200-3054-13-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12block: Add BlockJobTxn support to backup_runJohn Snow
Allow a BlockJobTxn to be passed into backup_run, which will allow the job to join a transactional group if present. Propagate this new parameter outward into new QMP helper functions in blockdev.c to allow transaction commands to pass forward their BlockJobTxn object in a forthcoming patch. [split up from a patch originally by Stefan and Fam. --js] Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1446765200-3054-12-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12block/backup: Rely on commit/abort for cleanupJohn Snow
Switch over to the new .commit/.abort handlers for cleaning up incremental bitmaps. [split up from a patch originally by Stefan and Fam. --js] Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1446765200-3054-11-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12block: Add block job transactionsFam Zheng
Sometimes block jobs must execute as a transaction group. Finishing jobs wait until all other jobs are ready to complete successfully. Failure or cancellation of one job cancels the other jobs in the group. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1446765200-3054-10-git-send-email-jsnow@redhat.com [Rewrite the implementation which is now contained in block_job_completed. --Fam] Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12blockjob: Simplify block_job_finish_syncFam Zheng
With job->completed and job->ret to replace BlockFinishData. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1446765200-3054-9-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12blockjob: Add "completed" and "ret" in BlockJobFam Zheng
They are set when block_job_completed is called. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1446765200-3054-8-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12blockjob: Add .commit and .abort block job actionsFam Zheng
Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1446765200-3054-7-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12blockjob: Introduce reference count and fix reference to job->bsFam Zheng
Add reference count to block job, meanwhile move the ownership of the reference to job->bs from the caller (which is released in two completion callbacks) to the block job itself. It is necessary for block_job_complete_sync to work, because block job shouldn't live longer than its bs, as asserted in bdrv_delete. Now block_job_complete_sync can be simplified. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1446765200-3054-6-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12backup: Extract dirty bitmap handling as a separate functionFam Zheng
This will be reused by the coming new transactional completion code. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1446765200-3054-5-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12block: rename BlkTransactionState and BdrvActionOpsJohn Snow
These structures are misnomers, somewhat. (1) BlockTransactionState is not state for a transaction, but is rather state for a single transaction action. Rename it "BlkActionState" to be more accurate. (2) The BdrvActionOps describes operations for the BlkActionState, above. This name might imply a 'BdrvAction' or a 'BdrvActionState', which there isn't. Rename this to 'BlkActionOps' to match 'BlkActionState'. Lastly, update the surrounding in-line documentation and comments to reflect the current nature of how Transactions operate. This patch changes only comments and names, and should not affect behavior in any way. Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com> Message-id: 1446765200-3054-4-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2015-11-12iotests: add transactional incremental backup testJohn Snow
Test simple usage cases for using transactions to create and synchronize incremental backups. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Message-id: 1446765200-3054-3-git-send-email-jsnow@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-19 10:03:23 +0000