| Age | Commit message (Collapse) | Author |
|---|
|
When the TCG thread is started but not yet the machine, we wait in
qemu_tcg_cpu_thread_fn on tcg_halt_cond. To allow run_on_cpu already at
this time, we need to process pending request in that loop.
CC: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
CPUState::next_cpu is already CPUState *.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
As we have thread-local cpu_single_env now and KVM uses exactly one
thread per VCPU, we can drop the cpu_single_env updates from the loop
and initialize this variable only once during setup.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
|
|
Call to kvm_cpu_synchronize_state() is missing.
kvm_arch_stop_on_emulation_error may look at outdated registers here.
Signed-off-by: Gleb Natapov <gleb@redhat.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
Reviewed-by: Jan Kiszka <jan.kiszka@siemens.com>
|
|
* qemu-kvm/uq/master:
apic: Fix legacy vmstate loading for KVM
kvm: Implement kvm_irqchip_in_kernel like kvm_enabled
kvm: Allow to set shadow MMU size
|
|
* kraxel/vnc.2:
vnc: lift modifier keys on client disconnect.
vnc: implement shared flag handling.
vnc: fix ctrl key in vnc terminal emulation
Fix vnc memory corruption with width = 1400
|
|
* kiszka/queues/slirp:
slirp: Prevent sending ICMP error replies to source-only addresses
slirp: Remove unused variable and unused code
|
|
* kraxel/usb.38: (28 commits)
xhci: handle USB_RET_NAK
xhci: remote wakeup support
xhci: kill port arg from xhci_setup_packet
xhci: stop on errors
xhci: add trb type name lookup support.
xhci: signal low- and fullspeed support
usb: add USBBusOps->wakeup_endpoint
usb: pass USBEndpoint to usb_wakeup
usb: maintain async packet list per endpoint
usb: Set USBEndpoint in usb_packet_setup().
usb: add USBEndpoint->{nr,pid}
usb: USBPacket: add status, rename owner -> ep
usb: fold usb_generic_handle_packet into usb_handle_packet
usb: kill handle_packet callback
usb-xhci: switch to usb_find_device()
usb-musb: switch to usb_find_device()
usb-ohci: switch to usb_find_device()
usb-ehci: switch to usb_find_device()
usb-uhci: switch to usb_find_device()
usb: handle dev == NULL in usb_handle_packet()
...
|
|
* kwolf/for-anthony:
AHCI: Masking of IRQs actually masks them
sheepdog: fix co_recv coroutine context
AHCI: Fix port reset race
rewrite QEMU_BUILD_BUG_ON
qcow2: Keep unknown header extension when rewriting header
qcow2: Update whole header at once
vpc: Round up image size during fixed image creation
vpc: Add support for Fixed Disk type
iSCSI: add configuration variables for iSCSI
qemu-io: add write -z option for bdrv_co_write_zeroes
qed: add .bdrv_co_write_zeroes() support
qed: replace is_write with flags field
block: perform zero-detection during copy-on-read
block: add .bdrv_co_write_zeroes() interface
cutils: extract buffer_is_zero() from qemu-img.c
|
|
Otherwise we end up with a dangling reference which causes qdev_free() to fail.
Reported-by: Michael Tsirkin <mst@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
Replace device_init() with generalized type_init().
While at it, unify naming convention: type_init([$prefix_]register_types)
Also, type_init() is a function, so add preceding blank line where
necessary and don't put a semicolon after the closing brace.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Cc: Anthony Liguori <anthony@codemonkey.ws>
Cc: malc <av1474@comtv.ru>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
|
|
qdev_prop_set_* functions are always called by machine init functions
that should know what they're doing, so they abort on error. Still,
an assert(!errp) does not aid debugging. Print an error before aborting.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
SPARC and PPC set properties to NULL. This can be done with an
empty string value.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Fix this error:
/src/qemu/target-ppc/helper.c: In function 'booke206_tlb_to_page_size':
/src/qemu/target-ppc/helper.c:1296:14: error: variable 'tlbncfg' set but not used [-Werror=unused-but-set-variable]
Tested-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
The conversion to memory regions broke lazy ROMD switching by forgetting
to update the rom_mode state variable.
Signed-off-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Helpful to understand guest configurations of things like the i440FX's
PAM or the state of ROM devices.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
This fixes the regression introduced by cd7a45c95e: We lost the or'ing
with the full_update flag.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Fix confusion in length calculation in commit
cd7a45c95ecf2404810f3c6becb7cb83c5010ad8.
Reported-by: Jan Kiszka <jan.kiszka@web.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
|
|
Add a field to XHCITransfer to correctly keep track of NAK'ed usb
packets. Retry transfers when the endpoint is kicked again. Implement
wakeup_endpoint bus op so we can kick the endpoint when needed.
With this patch applied the emulated hid devices are working correctly
when hooked up to xhci. usb-tabled without polling, yay!
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Unused argument, remove it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
When some error happened we'll have to stop processing the endpoint.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
When logging TRBs add a the type name for more readable debug output.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Add usb bus op which is called whenever a usb endpoint becomes ready,
so the host adapter emulation can react on that event.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Devices must specify which endpoint has data to transfer now.
The plan is to use the usb_wakeup() not only for remove wakeup support,
but for "data ready" signaling in general, so we can move away from
constant polling to event driven usb device emulation.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Maintain a list of async packets per endpoint. With the current code
the list will never receive more than a single item. I think you can
guess what the future plan is though ;)
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
With the separation of the device lookup (via usb_find_device) and
packet processing we can lookup device and endpoint before setting up
the usb packet. So we can initialize USBPacket->ep early and keep it
valid for the whole lifecycle of the USBPacket. Also the devaddr and
devep fields are not needed any more.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Add a "nr" and "pid" fields to USBEndpoint so you can easily figure the
endpoint number and direction of any given endpoint.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Add enum to track the status of USBPackets, use that instead of the
owner pointer to figure whenever a usb packet is currently in flight
or not. Add some more packet status sanity checks. Also rename the
USBEndpoint pointer from "owner" to "ep".
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
There is no reason to have a separate usb_generic_handle_packet function
any more, fold it into usb_handle_packet(). Also call the do_token_*
functions which handle control transfer emulation for control pipe
packets only.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
All drivers except usb-hub use usb_generic_handle_packet. The only
reason the usb hub has its own function is that it used to be called
with packets which are intended for downstream devices. With the new,
separate device lookup step this doesn't happen any more, so the need
for a different handle_packet callback is gone.
So we can kill the handle_packet callback and just call
usb_generic_handle_packet directly. The special hub handling in
usb_handle_packet() can go away for the same reason.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Switch over xHCI to use the new usb_find_device()
function for device lookup.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Switch over musb to use the new usb_find_device()
function for device lookup.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Switch over OHCI to use the new usb_find_device()
function for device lookup.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Switch over EHCI to use the new usb_find_device()
function for device lookup.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Switch over UHCI to use the new usb_find_device()
function for device lookup.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Allow passing in a NULL pointer, return USB_RET_NODEV in that case.
Removes the burden to to a NULL pointer check from the callers.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Implement the find_device callback for the usb hub. It'll loop over all
ports, calling usb_find_device for all enabled ports until it finds a
matching device.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Add usb_find_device(). This function will check whenever a device with
a specific address is connected to the specified port. Usually this
will just check state and address of the device hooked up to the port,
but in case of a hub it will ask the hub to check all hub ports for a
matching device.
This patch doesn't put the code into use yet, see the following patches
for details.
The master plan is to separate device lookup and packet processing.
Right now the usb code simply walks all devices, calls
usb_handle_packet() on each until one accepts the packet (by returning
something different that USB_RET_NODEV). I want to have a device lookup
first, then call usb_handle_packet() once, for the device which actually
processes the packet.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
No users left. Zap it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
The USB subsystem pipes internal reset notifications through
usb_handle_packet() with a special magic PID. This indirection
is a pretty pointless excercise as it ends up being handled by
usb_generic_handle_packet anyway.
Replace the USB_MSG_RESET with a usb_device_reset() function
which can be called directly. Also rename the existing usb_reset()
function to usb_port_reset() to avoid confusion.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
The USB subsystem pipes internal attach/detach notifications through
usb_handle_packet() with a special magic PID. This indirection is a
pretty pointless excercise as it ends up being handled by
usb_generic_handle_packet anyway. Remove it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
This patch adds the posibility to filter out certain devices from redirecion.
To use this pass the filter property to -device usb-redir. The filter
property takes a string consisting of filter rules, the format for a rule is:
<class>:<vendor>:<product>:<version>:<allow>
-1 can be used to allow any value for a field.
Muliple rules can be concatonated using | as a separator. Note that if
a device matches none of the passed in rules, redirecting it will not be
allowed!
Example:
-device usb-redir,filter='-1:0x0781:0x5567:-1:0|0x08:-1:-1:-1:1'
This example will deny the Sandisk Cruzer Blade being redirected, as it
has a usb id of 0781:5567, it will allow any other usb mass storage devices,
and it will deny any other devices (the default for devices not matching any
of the rules.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
According to the EHCI spec port ownership should revert to the EHCI controller
on device disconnect. This fixes the problem of a port getting stuck on USB 1
when using redirection and plugging in a USB 2 device after a USB 1 device
has been redirected.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
The OS is allowed to make the UHCI Controller run in circles. That is
usually done to serve multiple connected USB devices in a robin-round
fashion, so the available USB bandwidth is evenly distributed between
devices.
The uhci emulation handles this in a very poor way though. When it
figures it runs in circles it stops processing unconditionally, so
it usually processes at most a single transfer desriptor per queue,
even if there are multiple transfer descriptors are queued up.
This patch makes uhci act in a more sophisticated way. It keeps track
of successful processed transfer descriptors and transfered bytes. Then
it will stop processing when there is nothing to do (no transfer
descriptor was completed the last round) or when the transfered data
reaches the usb bandwidth limit.
Result is that the usb-storage devices connected to uhci are ten times
faster, mkfs.vfat time for a 64M stick goes down from five seconds to
a half second. Reason for this is that we are now processing up to 20
transfer descriptors (with 64 bytes each) per frame instead of a single
one.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
For any modifier key (shift, ctrl, alt) still pressed on disconnect
inject a key-up event into the guest. The vnc client is gone, it will
not do that, so qemu has to do it instead.
Without this keys will get stuck, making the guest act in weird ways
after reconnecting. Reproducer: exit vnc client via Alt-F4, guest
continues to see the pressed alt key and will not react to key events
in any useful way until you tap the alt key once to unstuck it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
VNC clients send a shared flag in the client init message. Up to now
qemu completely ignores this. This patch implements shared flag
handling. It comes with three policies: By default qemu behaves as one
would expect: Asking for a exclusive access grants exclusive access to
the client connecting. There is also a desktop sharing mode which
disallows exclusive connects (so one forgetting -shared wouldn't drop
everybody else) and a compatibility mode which mimics the traditional
(but non-conforming) qemu behavior.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
Make the control keys for terminals on the vnc display
(i.e. qemu -vnc :0 -serial vc) work. Makes the terminals
alot more usable as typing Ctrl-C in your serial console
actually has the desired effect ;)
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
|
vnc assumes that the screen width is a multiple of 16 in several places.
If this is not the case vnc will overrun buffers, corrupt memory, make
qemu crash.
This is the minimum fix for this bug. It makes sure we don't overrun the
scanline, thereby fixing the segfault. The rendering is *not* correct
though, there is a black border at the right side of the screen, 8
pixels wide because 1400 % 16 == 8.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
|
