aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-07-18hw/arm/smmu: Split smmuv3_translate()Mostafa Saleh
smmuv3_translate() does everything from STE/CD parsing to TLB lookup and PTW. Soon, when nesting is supported, stage-1 data (tt, CD) needs to be translated using stage-2. Split smmuv3_translate() to 3 functions: - smmu_translate(): in smmu-common.c, which does the TLB lookup, PTW, TLB insertion, all the functions are already there, this just puts them together. This also simplifies the code as it consolidates event generation in case of TLB lookup permission failure or in TT selection. - smmuv3_do_translate(): in smmuv3.c, Calls smmu_translate() and does the event population in case of errors. - smmuv3_translate(), now calls smmuv3_do_translate() for translation while the rest is the same. Also, add stage in trace_smmuv3_translate_success() Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20240715084519.1189624-6-smostafa@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-07-18hw/arm/smmu: Use enum for SMMU stageMostafa Saleh
Currently, translation stage is represented as an int, where 1 is stage-1 and 2 is stage-2, when nested is added, 3 would be confusing to represent nesting, so we use an enum instead. While keeping the same values, this is useful for: - Doing tricks with bit masks, where BIT(0) is stage-1 and BIT(1) is stage-2 and both is nested. - Tracing, as stage is printed as int. Reviewed-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Message-id: 20240715084519.1189624-5-smostafa@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-07-18hw/arm/smmuv3: Fix encoding of CLASS in eventsMostafa Saleh
The SMMUv3 spec (ARM IHI 0070 F.b - 7.3 Event records) defines the class of events faults as: CLASS: The class of the operation that caused the fault: - 0b00: CD, CD fetch. - 0b01: TTD, Stage 1 translation table fetch. - 0b10: IN, Input address However, this value was not set and left as 0 which means CD and not IN (0b10). Another problem was that stage-2 class is considered IN not TT for EABT, according to the spec: Translation of an IPA after successful stage 1 translation (or, in stage 2-only configuration, an input IPA) - S2 == 1 (stage 2), CLASS == IN (Input to stage) This would change soon when nested translations are supported. While at it, add an enum for class as it would be used for nesting. However, at the moment stage-1 and stage-2 use the same class values, except for EABT. Fixes: 9bde7f0674 “hw/arm/smmuv3: Implement translate callback” Signed-off-by: Mostafa Saleh <smostafa@google.com> Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Message-id: 20240715084519.1189624-4-smostafa@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-07-18hw/arm/smmu: Fix IPA for stage-2 eventsMostafa Saleh
For the following events (ARM IHI 0070 F.b - 7.3 Event records): - F_TRANSLATION - F_ACCESS - F_PERMISSION - F_ADDR_SIZE If fault occurs at stage 2, S2 == 1 and: - If translating an IPA for a transaction (whether by input to stage 2-only configuration, or after successful stage 1 translation), CLASS == IN, and IPA is provided. At the moment only CLASS == IN is used which indicates input translation. However, this was not implemented correctly, as for stage 2, the code only sets the S2 bit but not the IPA. This field has the same bits as FetchAddr in F_WALK_EABT which is populated correctly, so we don’t change that. The setting of this field should be done from the walker as the IPA address wouldn't be known in case of nesting. For stage 1, the spec says: If fault occurs at stage 1, S2 == 0 and: CLASS == IN, IPA is UNKNOWN. So, no need to set it to for stage 1, as ptw_info is initialised by zero in smmuv3_translate(). Fixes: e703f7076a “hw/arm/smmuv3: Add page table walk for stage-2” Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Mostafa Saleh <smostafa@google.com> Message-id: 20240715084519.1189624-3-smostafa@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-07-18hw/arm/smmu-common: Add missing size check for stage-1Mostafa Saleh
According to the SMMU architecture specification (ARM IHI 0070 F.b), in “3.4 Address sizes” The address output from the translation causes a stage 1 Address Size fault if it exceeds the range of the effective IPA size for the given CD. However, this check was missing. There is already a similar check for stage-2 against effective PA. Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Eric Auger <eric.auger@redhat.com> Signed-off-by: Mostafa Saleh <smostafa@google.com> Message-id: 20240715084519.1189624-2-smostafa@google.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-07-18hw/display/bcm2835_fb: fix fb_use_offsets conditionSamJakob
It is common practice when implementing double-buffering on VideoCore to do so by multiplying the height of the virtual buffer by the number of virtual screens desired (i.e., two - in the case of double-bufferring). At present, this won't work in QEMU because the logic in fb_use_offsets require that both the virtual width and height exceed their physical counterparts. This appears to be unintentional/a typo and indeed the comment states; "Experimentally, the hardware seems to do this only if the viewport size is larger than the physical screen". The viewport/virtual size would be larger than the physical size if either virtual dimension were larger than their physical counterparts and not necessarily both. Signed-off-by: SamJakob <me@samjakob.com> Message-id: 20240713160353.62410-1-me@samjakob.com Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-07-18target/arm: LDAPR should honour SCTLR_ELx.nAAPeter Maydell
In commit c1a1f80518d360b when we added the FEAT_LSE2 relaxations to the alignment requirements for atomic and ordered loads and stores, we didn't quite get it right for LDAPR/LDAPRH/LDAPRB with no immediate offset. These instructions were handled in the old decoder as part of disas_ldst_atomic(), but unlike all the other insns that function decoded (LDADD, LDCLR, etc) these insns are "ordered", not "atomic", so they should be using check_ordered_align() rather than check_atomic_align(). Commit c1a1f80518d360b used check_atomic_align() regardless for everything in disas_ldst_atomic(). We then carried that incorrect check over in the decodetree conversion, where LDAPR/LDAPRH/LDAPRB are now handled by trans_LDAPR(). The effect is that when FEAT_LSE2 is implemented, these instructions don't honour the SCTLR_ELx.nAA bit and will generate alignment faults when they should not. (The LDAPR insns with an immediate offset were in disas_ldst_ldapr_stlr() and then in trans_LDAPR_i() and trans_STLR_i(), and have always used the correct check_ordered_align().) Use check_ordered_align() in trans_LDAPR(). Cc: qemu-stable@nongnu.org Fixes: c1a1f80518d360b ("target/arm: Relax ordered/atomic alignment checks for LSE2") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240709134504.3500007-3-peter.maydell@linaro.org
2024-07-18target/arm: Fix handling of LDAPR/STLR with negative offsetPeter Maydell
When we converted the LDAPR/STLR instructions to decodetree we accidentally introduced a regression where the offset is negative. The 9-bit immediate field is signed, and the old hand decoder correctly used sextract32() to get it out of the insn word, but the ldapr_stlr_i pattern in the decode file used "imm:9" instead of "imm:s9", so it treated the field as unsigned. Fix the pattern to treat the field as a signed immediate. Cc: qemu-stable@nongnu.org Fixes: 2521b6073b7 ("target/arm: Convert LDAPR/STLR (imm) to decodetree") Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2419 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240709134504.3500007-2-peter.maydell@linaro.org
2024-07-18Merge tag 'pull-riscv-to-apply-20240718-1' of ↵Richard Henderson
https://github.com/alistair23/qemu into staging RISC-V PR for 9.1 * Support the zimop, zcmop, zama16b and zabha extensions * Validate the mode when setting vstvec CSR * Add decode support for Zawrs extension * Update the KVM regs to Linux 6.10-rc5 * Add smcntrpmf extension support * Raise an exception when CSRRS/CSRRC writes a read-only CSR * Re-insert and deprecate 'riscv,delegate' in virt machine device tree * roms/opensbi: Update to v1.5 # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmaYeUcACgkQr3yVEwxT # gBMtdw//U2NbmnmECa0uXuE7fdFul0tUkl2oHb9Cr8g5Se5g/HVFqexAKOFZ8Lcm # DvTl94zJ2dms4RntcmJHwTIusa+oU6qqOekediotjgpeH4BHZNCOHe0E9hIAHn9F # uoJ1P186L7VeVr7OFAAgSCE7F6egCk7iC0h8L8/vuL4xcuyfbZ2r7ybiTl1+45N2 # YBBv5/00wsYnyMeqRYYtyqgX9QR017JRqNSfTJSbKxhQM/L1GA1xxisUvIGeyDqc # Pn8E3dMN6sscR6bPs4RP+SBi0JIlRCgth/jteSUkbYf42osw3/5sl4oK/e6Xiogo # SjELOF7QJNxE8H6EUIScDaCVB5ZhvELZcuOL2NRdUuVDkjhWXM633HwfEcXkZdFK # W/H9wOvNxPAJIOGXOpv10+MLmhdyIOZwE0uk6evHvdcTn3FP9DurdUCc1se0zKOA # Qg/H6usTbLGNQ7KKTNQ6GpQ6u89iE1CIyZqYVvB1YuF5t7vtAmxvNk3SVZ6aq3VL # lPJW2Zd1eO09Q+kRnBVDV7MV4OJrRNsU+ryd91NrSVo9aLADtyiNC28dCSkjU3Gn # 6YQZt65zHuhH5IBB/PGIPo7dLRT8KNWOiYVoy3c6p6DC6oXsKIibh0ue1nrVnnVQ # NRqyxPYaj6P8zzqwTk+iJj36UXZZVtqPIhtRu9MrO6Opl2AbsXI= # =pM6B # -----END PGP SIGNATURE----- # gpg: Signature made Thu 18 Jul 2024 12:09:11 PM AEST # gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013 # gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013 * tag 'pull-riscv-to-apply-20240718-1' of https://github.com/alistair23/qemu: (30 commits) roms/opensbi: Update to v1.5 hw/riscv/virt.c: re-insert and deprecate 'riscv,delegate' target/riscv: raise an exception when CSRRS/CSRRC writes a read-only CSR target/riscv: Expose the Smcntrpmf config target/riscv: Do not setup pmu timer if OF is disabled target/riscv: More accurately model priv mode filtering. target/riscv: Start counters from both mhpmcounter and mcountinhibit target/riscv: Enforce WARL behavior for scounteren/hcounteren target/riscv: Save counter values during countinhibit update target/riscv: Implement privilege mode filtering for cycle/instret target/riscv: Only set INH fields if priv mode is available target/riscv: Add cycle & instret privilege mode filtering support target/riscv: Add cycle & instret privilege mode filtering definitions target/riscv: Add cycle & instret privilege mode filtering properties target/riscv: Fix the predicate functions for mhpmeventhX CSRs target/riscv: Combine set_mode and set_virt functions. target/riscv/kvm: update KVM regs to Linux 6.10-rc5 disas/riscv: Add decode for Zawrs extension target/riscv: Validate the mode in write_vstvec disas/riscv: Support zabha disassemble ... Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2024-07-18roms/opensbi: Update to v1.5Daniel Henrique Barboza
Update OpenSBI and the pre-built opensbi32 and opensbi64 images to v1.5. The following commits were included in v1.5: 455de67 include: Bump-up version to 1.5 23b7bad lib: sbi: check incoming dbtr shmem address 0e45b63 docs: Fix wrong filename caae2f7 lib: sbi: fwft: return SBI_EINVAL rather than SBI_ERR_INVALID_PARAM e8717d1 lib: sbi: fwft: check feature value to be exactly 1 or 0 ecef14d lib: sbi: implement SBI FWFT extension e9ee967 lib: sbi: fwft: add support for SBI_FWFT_PTE_AD_HW_UPDATING c97a1d5 lib: sbi: fwft: add support for SBI_FWFT_MISALIGNED_EXC_DELEG aa5a859 lib: sbi: add support for firmware features extension 53844c9 lib: sbi: Add support for Svade and Svadu extensions 52dcf35 platform: generic: andes: Add support for RV32 to set up PMA f09f164 platform: generic: andes: Refine Andes PMA related code 7830e98 lib: serial: fix RX path in litex-uart 62e178a lib: utils/reset: Try initializing all reset devices in dt 3a94a32 sbi: sbi_domain_context: Fix trap context for domain context switching a73ff04 lib: utils/reset: Fix fdt_reset to search for more dt nodes b5c984b lib: utils/reset: Skip initialize reset when dt is not enabled 86bbe6c lib: utils/serial: Fix fdt_serial to match more dt nodes 179e00a lib: utils/serial: Skip initialize serial when dt is not enabled b1c7c75 lib: utils/irqchip: Skip initialize irqchip when dt is not enabled 5e3ad7d lib: utils/timer: Skip initialize timer when dt is not enabled c5be0e1 lib: utils/ipi: Skip initialize ipi when dt is not enabled df3db6a lib: utils/fdt: Fix DT property for APLIC delegation d962db2 lib: utils/gpio: respect flag GPIO_FLAG_ACTIVE_LOW ae5ef18 lib: sbi: sse: handle missing writable attributes 858754a lib: utils/irqchip: Add sanity checks in imsic_get_data() and imsic_get_target_file() 96f0a2e firmware: Bring back FW_TEXT_START as an optional parameter e3a30a2 lib: utils/irqchip: Check before initializing imsic 2bed4c1 platform: generic: thead: add Sophgo CV18XX/SG200X series 533067d lib: sbi: Put event after use in sbi_sse_exit() loop ea9cf6a utils/reset: Add SG2042 hwmon MCU support. 1cb792d lib: sbi: simplify inline function in sbi_dtbr.c 7b37da3 lib: sbi: fix return type of sbi_dbtr_shmem_disabled e065c3c lib: sbi: Fixed memory permission check in sbi_dbtr_setup_shmem 7f54527 lib: sbi: fix DBTR_SHMEM_MAKE_PHYS for RV64 744f495 lib: sbi: Removal unnecessary check dbtr_thishart_state_ptr 4953bd7 lib: sbi: fix hart_shmem_base 019a8e6 platform: generic: thead: add Canaan Kendryte K230 33e21c9 platform: generic: thead: separate T-Head PMU Errata 2b93ce0 platform: andes: Change all occurrences of andes45 to andes f68b3ae platform: andes: Rename files with the prefix andes45 17e8291 sbi: sbi_domain_context: Add spinlock for updating domain assigned_harts 1d89a9d lib: sbi: Refine the settings for switching to Virtual Supervisor Mode. 033104d lib: sbi: sse: check handler entry to belong to supervisor mode bd00765 lib: sbi: sse: use PRV_S instead of hardcoded value for mode ce3c82c lib: sbi: sse: call enable callback before sending IPI d528dbf lib: sbi: sse: remove superfluous sbi_list_empty() check 22ff750 lib: sbi: sse: simplify 32bits overflow check 7aa80ea lib: sbi: sse: rename sse_hart_unlock() to sse_enabled_event_unlock() c21c99d lib: sbi: sse: fix typos, comments and spacing errors 7b1ed96 lib: tests: Add test for spinlocks 7bdf41a lib: tests: Add test for atomic_t f6243d9 lib: tests: Add test suite init function d4d2582 firmware: remove FW_TEXT_START 73344d4 lib: utils: check correct value in fdt_node_offset_by_compatible 37e1544 lib: sbi: sse_event_get() may return NULL 68bc031 lib: sbi: Add missing sscrind and sscfg extensions in sbi_hart_ext[] a7c5c2c Makefile: Remove unnecessary dependencies 268feab Makefile: Respect manual changes to .config 29ecda9 sbi: sbi_domain_context: Check privilege spec version before accessing S-mode CSRs 7862c24 lib: sbi: Wakeup non-coldboot HARTs early in the coldboot path beb0cd1 lib: sbi: Simplify wait_for_coldboot() implementation f5375bc platform: generic: allwinner: Optimize current hart scratch access b94396c lib: utils/timer: Optimize current hart scratch access 5c9a735 include: sbi: Support byteorder macros in assembly 06fc453 lib: sbi: Add SSE support for PMU events 09ad214 lib: sbi: Implement SBI SSE extension c8cdf01 lib: sbi: Add support for Supervisor Software Events extension 76d7e9b firmware: remove copy-base relocation 5186da6 platform: generic: allwinner: sun20i-d1: Remove duplicated CSR definitions 3b2f89e docs: writing_tests: Make docs correspond the latest changes f7d0050 lib: sbi: Extend sbi_trap_error() to dump state in a nested trap 5b11f16 lib: sbi: Pass trap context pointer to sbi_ecall_handler() 43d346c lib: sbi: Remove regs parameter from trap irq handling functions d84e7eb lib: sbi: Remove regs paramter of sbi_irqchip_process() f414cf9 lib: sbi: Simplify parameters of sbi_illegal_insn_handler() fea33a9 lib: sbi: Simplify parameters of misaligned and access fault handlers abea949 lib: sbi: Introduce trap context 60ffc15 include: sbi: Add trap_context pointer in struct sbi_scratch ebb697a lib: sbi: Remove sbi_trap_exit() and related code 2e85178 lib: sbi: Remove epc from struct sbi_trap_info 86224ec docs/writing_tests: Update tests paths 5c992a1 lib: tests: Move tests to a separate directory 81e3ba7 lib: sbi: call platform load/store emulators ddf3b64 include: sbi: add emulate_load/store handler to platform ops 4c11265 lib: sbi: abstract out insn decoding to unify mem fault handlers 9221fe5 lib: sbi: change prototype of sbi_misaligned_load/store_handler a17600c lib: sbi: change prototype of sbi_trap_redirect 2471cf2 include: sbi: rename sbi_misaligned_ldst.h to sbi_trap_ldst.h c0a6320 lib: sbi: rename sbi_misaligned_ldst.c to sbi_trap_ldst.c e11025c lib: sbi: Add initial domain context management support 87d8fe7 lib: tests: Add sbi_console test e5f53fd lib: tests: Add a test for sbi_bitmap 874fcef lib: Add SBIUnit testing macros and functions b9e4de0 docs: Add documentation about tests and SBIUnit 526b9ce firmware: fw_base.S: fix _reset_regs 8151105 firmware: fw_base.S: Remove _relocate_lottery 187397f firmware: fw_dynamic.S: Remove _bad_dynamic_info b27b7c6 firmware: fw_base: Simplified setup trap handler fdf5589 firmware: fw_base.S: Simplify address get 748bef1 lib: sbi_misaligned_ldst: Add handling of C.LHU/C.LH and C.SH bc36678 platform: andes: Drop andes_pmu_setup() 6bb6b61 lib: sbi: Add support for smcsrind and smcdeleg 322b598 lib: sbi_hsm: Restor hart state to stop when fails to start 96a35db docs/firmware: document new options for jump and payload firmwares 2cff7f3 platform: Apply relocatable address f056939 firmware: Add relocatable FW_PAYLOAD_FDT_ADDR 7227cdd firmware: Add relocatable FW_JUMP_ADDR and FW_JUMP_FDT_ADDR 741e941 platform: starfive: call starfive_jh7110_inst_init() in pm_reset_init() 3edf044 platform: starfive: return error if needed devices are not present 80ae046 platform: starfive: rename "stf,axp15060-regulator" -> "x-powers,axp15060" 5335340 platform: starfive: remove redundant compatibility check in pmic_ops 4d8569d platform: starfive: get I2C offset address from clocks property 034af1f platform: starfive: correct system clock device tree node 88273fe lib: sbi_pmu: Before using we should ensure PMU init done 46c8c65 docs: move documentation of system suspend test. 8df836d platform: generic: Parse system suspend test from config node. 23e7e48 docs: Add OpenSBI DT configuration guide. 67ce5a7 platform: generic: Add support for specify coldboot harts in DT 9c8b18e firmware: fw_base.S: remove _runtime_offset 4c6b7cb firmware: fw_base.S: Improve loading u32 92e8aff firmware: always create dynsym section d1dad07 Makefile: check for --exclude-libs 4a76f79 Makefile: don't pass -mstrict-align if not supported 21caaa3 fw_base.S: Fix comment errors 1ec353d lib: sbi: Use mask to check the free bit during trigger allocation bb90a9e lib: sbi: Print number of debug triggers found 76a2a15 lib: sbi: Implement SBI debug trigger extension fa87ec9 include: sbi: Add SBI debug trigger extension related defines 97f234f lib: sbi: Introduce the SBI debug triggers extension support 40dac6b lib: sbi: Detect support of debug triggers 2499769 include: sbi: Introduce debug trigger register encodings 20ca19a include: sbi: Add TINFO debug trigger CSR b752099 include: sbi: Introduce common endianess conversion macro Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240715171521.179517-1-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-07-18hw/riscv/virt.c: re-insert and deprecate 'riscv,delegate'Daniel Henrique Barboza
Commit b1f1e9dcfa renamed 'riscv,delegate' to 'riscv,delegation' since it is the correct name as per dt-bindings, and the absence of the correct name will result in validation fails when dumping the dtb and using dt-validate. But this change has a side-effect: every other firmware available that is AIA capable is using 'riscv,delegate', and it will fault/misbehave if this property isn't present. The property was added back in QEMU 7.0, meaning we have 2 years of firmware development using the wrong property. Re-introducing 'riscv,delegate' while keeping 'riscv,delegation' allows older firmwares to keep booting with the 'virt' machine. 'riscv,delegate' is then marked for future deprecation with its use being discouraged from now on. Cc: Conor Dooley <conor@kernel.org> Cc: Anup Patel <apatel@ventanamicro.com> Fixes: b1f1e9dcfa ("hw/riscv/virt.c: aplic DT: rename prop to 'riscv, delegation'") Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240715090455.145888-1-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-07-18target/riscv: raise an exception when CSRRS/CSRRC writes a read-only CSRYu-Ming Chang
Both CSRRS and CSRRC always read the addressed CSR and cause any read side effects regardless of rs1 and rd fields. Note that if rs1 specifies a register holding a zero value other than x0, the instruction will still attempt to write the unmodified value back to the CSR and will cause any attendant side effects. So if CSRRS or CSRRC tries to write a read-only CSR with rs1 which specifies a register holding a zero value, an illegal instruction exception should be raised. Signed-off-by: Yu-Ming Chang <yumin686@andestech.com> Signed-off-by: Alvin Chang <alvinga@andestech.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <172100444279.18077.6893072378718059541-0@git.sr.ht> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-07-18target/riscv: Expose the Smcntrpmf configAtish Patra
Create a new config for Smcntrpmf extension so that it can be enabled/ disabled from the qemu commandline. Signed-off-by: Atish Patra <atishp@rivosinc.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240711-smcntrpmf_v7-v8-13-b7c38ae7b263@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-07-18target/riscv: Do not setup pmu timer if OF is disabledAtish Patra
The timer is setup function is invoked in both hpmcounter write and mcountinhibit write path. If the OF bit set, the LCOFI interrupt is disabled. There is no benefitting in setting up the qemu timer until LCOFI is cleared to indicate that interrupts can be fired again. Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Signed-off-by: Atish Patra <atishp@rivosinc.com> Message-ID: <20240711-smcntrpmf_v7-v8-12-b7c38ae7b263@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-07-18target/riscv: More accurately model priv mode filtering.Rajnesh Kanwal
In case of programmable counters configured to count inst/cycles we often end-up with counter not incrementing at all from kernel's perspective. For example: - Kernel configures hpm3 to count instructions and sets hpmcounter to -10000 and all modes except U mode are inhibited. - In QEMU we configure a timer to expire after ~10000 instructions. - Problem is, it's often the case that kernel might not even schedule Umode task and we hit the timer callback in QEMU. - In the timer callback we inject the interrupt into kernel, kernel runs the handler and reads hpmcounter3 value. - Given QEMU maintains individual counters to count for each privilege mode, and given umode never ran, the umode counter didn't increment and QEMU returns same value as was programmed by the kernel when starting the counter. - Kernel checks for overflow using previous and current value of the counter and reprograms the counter given there wasn't an overflow as per the counter value. (Which itself is a problem. We have QEMU telling kernel that counter3 overflowed but the counter value returned by QEMU doesn't seem to reflect that.). This change makes sure that timer is reprogrammed from the handler if the counter didn't overflow based on the counter value. Second, this change makes sure that whenever the counter is read, it's value is updated to reflect the latest count. Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20240711-smcntrpmf_v7-v8-11-b7c38ae7b263@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-07-18target/riscv: Start counters from both mhpmcounter and mcountinhibitRajnesh Kanwal
Currently we start timer counter from write_mhpmcounter path only without checking for mcountinhibit bit. This changes adds mcountinhibit check and also programs the counter from write_mcountinhibit as well. When a counter is stopped using mcountinhibit we simply update the value of the counter based on current host ticks and save it for future reads. We don't need to disable running timer as pmu_timer_trigger_irq will discard the interrupt if the counter has been inhibited. Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20240711-smcntrpmf_v7-v8-10-b7c38ae7b263@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-07-18target/riscv: Enforce WARL behavior for scounteren/hcounterenAtish Patra
scounteren/hcountern are also WARL registers similar to mcountern. Only set the bits for the available counters during the write to preserve the WARL behavior. Signed-off-by: Atish Patra <atishp@rivosinc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240711-smcntrpmf_v7-v8-9-b7c38ae7b263@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-07-18target/riscv: Save counter values during countinhibit updateAtish Patra
Currently, if a counter monitoring cycle/instret is stopped via mcountinhibit we just update the state while the value is saved during the next read. This is not accurate as the read may happen many cycles after the counter is stopped. Ideally, the read should return the value saved when the counter is stopped. Thus, save the value of the counter during the inhibit update operation and return that value during the read if corresponding bit in mcountihibit is set. Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Signed-off-by: Atish Patra <atishp@rivosinc.com> Message-ID: <20240711-smcntrpmf_v7-v8-8-b7c38ae7b263@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-07-18target/riscv: Implement privilege mode filtering for cycle/instretAtish Patra
Privilege mode filtering can also be emulated for cycle/instret by tracking host_ticks/icount during each privilege mode switch. This patch implements that for both cycle/instret and mhpmcounters. The first one requires Smcntrpmf while the other one requires Sscofpmf to be enabled. The cycle/instret are still computed using host ticks when icount is not enabled. Otherwise, they are computed using raw icount which is more accurate in icount mode. Co-Developed-by: Rajnesh Kanwal <rkanwal@rivosinc.com> Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Atish Patra <atishp@rivosinc.com> Message-ID: <20240711-smcntrpmf_v7-v8-7-b7c38ae7b263@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-07-18target/riscv: Only set INH fields if priv mode is availableAtish Patra
Currently, the INH fields are set in mhpmevent uncoditionally without checking if a particular priv mode is supported or not. Suggested-by: Alistair Francis <alistair23@gmail.com> Signed-off-by: Atish Patra <atishp@rivosinc.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240711-smcntrpmf_v7-v8-6-b7c38ae7b263@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-07-18target/riscv: Add cycle & instret privilege mode filtering supportKaiwen Xue
QEMU only calculates dummy cycles and instructions, so there is no actual means to stop the icount in QEMU. Hence this patch merely adds the functionality of accessing the cfg registers, and cause no actual effects on the counting of cycle and instret counters. Signed-off-by: Atish Patra <atishp@rivosinc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Signed-off-by: Kaiwen Xue <kaiwenx@rivosinc.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240711-smcntrpmf_v7-v8-5-b7c38ae7b263@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-07-18target/riscv: Add cycle & instret privilege mode filtering definitionsKaiwen Xue
This adds the definitions for ISA extension smcntrpmf. Signed-off-by: Kaiwen Xue <kaiwenx@rivosinc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Atish Patra <atishp@rivosinc.com> Message-ID: <20240711-smcntrpmf_v7-v8-4-b7c38ae7b263@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-07-18target/riscv: Add cycle & instret privilege mode filtering propertiesKaiwen Xue
This adds the properties for ISA extension smcntrpmf. Patches implementing it will follow. Signed-off-by: Kaiwen Xue <kaiwenx@rivosinc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Signed-off-by: Atish Patra <atishp@rivosinc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240711-smcntrpmf_v7-v8-3-b7c38ae7b263@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-07-18target/riscv: Fix the predicate functions for mhpmeventhX CSRsAtish Patra
mhpmeventhX CSRs are available for RV32. The predicate function should check that first before checking sscofpmf extension. Fixes: 14664483457b ("target/riscv: Add sscofpmf extension support") Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Atish Patra <atishp@rivosinc.com> Message-ID: <20240711-smcntrpmf_v7-v8-2-b7c38ae7b263@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-07-18target/riscv: Combine set_mode and set_virt functions.Rajnesh Kanwal
Combining riscv_cpu_set_virt_enabled() and riscv_cpu_set_mode() functions. This is to make complete mode change information available through a single function. This allows to easily differentiate between HS->VS, VS->HS and VS->VS transitions when executing state update codes. For example: One use-case which inspired this change is to update mode-specific instruction and cycle counters which requires information of both prev mode and current mode. Signed-off-by: Rajnesh Kanwal <rkanwal@rivosinc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20240711-smcntrpmf_v7-v8-1-b7c38ae7b263@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-07-18target/riscv/kvm: update KVM regs to Linux 6.10-rc5Daniel Henrique Barboza
Two new regs added: ztso and zacas. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240709085431.455541-1-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-07-18disas/riscv: Add decode for Zawrs extensionBalaji Ravikumar
Add disassembly support for these instructions from Zawrs: * wrs.sto * wrs.nto Signed-off-by: Balaji Ravikumar <bravikumar@rivosinc.com> Signed-off-by: Rob Bradford <rbradford@rivosinc.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240705165316.127494-1-rbradford@rivosinc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-07-18target/riscv: Validate the mode in write_vstvecJiayi Li
Base on the riscv-privileged spec, vstvec substitutes for the usual stvec. Therefore, the encoding of the MODE should also be restricted to 0 and 1. Signed-off-by: Jiayi Li <lijiayi@eswincomputing.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Message-ID: <20240701022553.1982-1-lijiayi@eswincomputing.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-07-18disas/riscv: Support zabha disassembleLIU Zhiwei
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240709113652.1239-12-zhiwei_liu@linux.alibaba.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-07-18target/riscv: Expose zabha extension as a cpu propertyLIU Zhiwei
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240709113652.1239-11-zhiwei_liu@linux.alibaba.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-07-18target/riscv: Add amocas.[b|h] for ZabhaLIU Zhiwei
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240709113652.1239-10-zhiwei_liu@linux.alibaba.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-07-18target/riscv: Move gen_cmpxchg before adding amocas.[b|h]LIU Zhiwei
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240709113652.1239-9-zhiwei_liu@linux.alibaba.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-07-18target/riscv: Add AMO instructions for ZabhaLIU Zhiwei
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240709113652.1239-8-zhiwei_liu@linux.alibaba.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-07-18target/riscv: Move gen_amo before implement ZabhaLIU Zhiwei
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240709113652.1239-7-zhiwei_liu@linux.alibaba.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-07-18target/riscv: Support Zama16b extensionLIU Zhiwei
Zama16b is the property that misaligned load/stores/atomics within a naturally aligned 16-byte region are atomic. According to the specification, Zama16b applies only to AMOs, loads and stores defined in the base ISAs, and loads and stores of no more than XLEN bits defined in the F, D, and Q extensions. Thus it should not apply to zacas or RVC instructions. For an instruction in that set, if all accessed bytes lie within 16B granule, the instruction will not raise an exception for reasons of address alignment, and the instruction will give rise to only one memory operation for the purposes of RVWMO—i.e., it will execute atomically. Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240709113652.1239-6-zhiwei_liu@linux.alibaba.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-07-18disas/riscv: Support zcmop disassembleLIU Zhiwei
Although in QEMU disassemble, we usually lift compressed instruction to an normal format when display the instruction name. For C.MOP.n, it is more reasonable to directly display its compressed name, because its behavior can be redefined by later extension. Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Deepak Gupta <debug@rivosinc.com> Message-ID: <20240709113652.1239-5-zhiwei_liu@linux.alibaba.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-07-18target/riscv: Add zcmop extensionLIU Zhiwei
Zcmop defines eight 16-bit MOP instructions named C.MOP.n, where n is an odd integer between 1 and 15, inclusive. C.MOP.n is encoded in the reserved encoding space corresponding to C.LUI xn, 0. Unlike the MOPs defined in the Zimop extension, the C.MOP.n instructions are defined to not write any register. In current implementation, C.MOP.n only has an check function, without any other more behavior. Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Deepak Gupta <debug@rivosinc.com> Message-ID: <20240709113652.1239-4-zhiwei_liu@linux.alibaba.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-07-18disas/riscv: Support zimop disassembleLIU Zhiwei
Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Deepak Gupta <debug@rivosinc.com> Message-ID: <20240709113652.1239-3-zhiwei_liu@linux.alibaba.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-07-18target/riscv: Add zimop extensionLIU Zhiwei
Zimop extension defines an encoding space for 40 MOPs.The Zimop extension defines 32 MOP instructions named MOP.R.n, where n is an integer between 0 and 31, inclusive. The Zimop extension additionally defines 8 MOP instructions named MOP.RR.n, where n is an integer between 0 and 7. These 40 MOPs initially are defined to simply write zero to x[rd], but are designed to be redefined by later extensions to perform some other action. Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Deepak Gupta <debug@rivosinc.com> Message-ID: <20240709113652.1239-2-zhiwei_liu@linux.alibaba.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2024-07-18Merge tag 'pull-trivial-patches' of https://gitlab.com/mjt0k/qemu into stagingRichard Henderson
trivial patches for 2024-07-17 # -----BEGIN PGP SIGNATURE----- # # iQEzBAABCAAdFiEEe3O61ovnosKJMUsicBtPaxppPlkFAmaXpakACgkQcBtPaxpp # Plnvvwf8DdybFjyhAVmiG6+6WhB5s0hJhZRiWzUY6ieMbgPzCUgWzfr/pJh6q44x # rw+aVfe2kf1ysycx3DjcJpucrC1rQD/qV6dB3IA1rxidBOZfCb8iZwoaB6yS9Epp # 4uXIdfje4zO6oCMN17MTXvuQIEUK3ZHN0EQOs7vsA2d8/pHqBqRoixjz9KnKHlpk # P6kyIXceZ4wLAtwFJqa/mBBRnpcSdaWuQpzpBsg1E3BXRXXfeuXJ8WmGp0kEOpzQ # k7+2sPpuah2z7D+jNFBW0+3ZYDvO9Z4pomQ4al4w+DHDyWBF49WnnSdDSDbWwxI5 # K0vUlsDVU8yTnIEgN8BL82F8eub5Ug== # =ZYHJ # -----END PGP SIGNATURE----- # gpg: Signature made Wed 17 Jul 2024 09:06:17 PM AEST # gpg: using RSA key 7B73BAD68BE7A2C289314B22701B4F6B1A693E59 # gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" [full] # gpg: aka "Michael Tokarev <mjt@debian.org>" [full] # gpg: aka "Michael Tokarev <mjt@corpit.ru>" [full] * tag 'pull-trivial-patches' of https://gitlab.com/mjt0k/qemu: meson: Update meson-buildoptions.sh backends/rng-random: Get rid of qemu_open_old() backends/iommufd: Get rid of qemu_open_old() backends/hostmem-epc: Get rid of qemu_open_old() hw/vfio/container: Get rid of qemu_open_old() hw/usb/u2f-passthru: Get rid of qemu_open_old() hw/usb/host-libusb: Get rid of qemu_open_old() hw/i386/sgx: Get rid of qemu_open_old() tests/avocado: Remove the non-working virtio_check_params test doc/net/l2tpv3: Update boolean fields' description to avoid short-form use target/hexagon/imported/mmvec: Fix superfluous trailing semicolon util/oslib-posix: Fix superfluous trailing semicolon hw/i386/x86: Fix superfluous trailing semicolon accel/kvm/kvm-all: Fix superfluous trailing semicolon README.rst: add the missing punctuations block/curl: rewrite http header parsing function Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2024-07-18Merge tag 'pull-qapi-2024-07-17' of https://repo.or.cz/qemu/armbru into stagingRichard Henderson
QAPI patches patches for 2024-07-17 # -----BEGIN PGP SIGNATURE----- # # iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmaXoUESHGFybWJydUBy # ZWRoYXQuY29tAAoJEDhwtADrkYZTatYP/jPlsmx8S6X397COQf6Wd4oEFQEMo/FS # tWFiHWenPUZ56U3O3lDNIw+5URbhF4aUpxhLGg6cmkrOwK0zPjARI2UNnUnZvPtN # EHf//KJOpYLsSdkIlIW2nYzB27ps0DRf5PgOGdOOdW32Nuq93FLx7ChDgbpmrijc # HzByyJIn1QEv/G0aOMLCuTPA7LpGjCAd2a/LjWYpSXB3WGizrS2Rrat7oJYUl8Rz # mAPgdiE0aH2yWHOTcWabKfN4AsIHCnv7qNOZkumoWpZ0XULbgyK1OO05ju3jRSrB # 0WiwiE8pEhHz7qstKGcjS1c7pPuId64ubm3RAZ1RUqVvA5TZGucwuYiuQHUVX6jH # BGzpfojISFzIfTiKemyfqBb1gjXjxT6OIlCtmlJSUCJohb70f0fhX3vniyhzyl1d # fFTM0jMbmBX89e/o3j6ZXa7anafYNDh5TjTK4BYeAXRqe+jZpvDJUrwu1OZIq1cd # Wr1RR8qaawpfjD5r9SXu1mX5MPCX4SmNVNoQ7N4ruWjpVojQNmuCRW9yLPIv3yTH # c5ESND4zdvceW5EF9f5GSIFwnIdGqnUwJyBMcULGoCxz1HougQmGR4bhqSkEl6RD # GRK+bj3pLdj9f/en62mE6+f5rkEJye3Y5fJ5dn9+Ld09PeUtY59YKnJGg896g55V # /pGOUWf3L4iY # =E0F5 # -----END PGP SIGNATURE----- # gpg: Signature made Wed 17 Jul 2024 08:47:29 PM AEST # gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653 # gpg: issuer "armbru@redhat.com" # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full] # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full] * tag 'pull-qapi-2024-07-17' of https://repo.or.cz/qemu/armbru: qapi: remove "Example" doc section qapi: convert "Example" sections with longer prose qapi: convert "Example" sections with titles qapi: convert "Example" sections without titles docs/sphinx: add CSS styling for qmp-example directive docs/qapidoc: add QMP highlighting to annotated qmp-example blocks docs/qapidoc: create qmp-example directive docs/qapidoc: factor out do_parse() qapi/ui: Drop note on naming of SpiceQueryMouseMode qapi/sockets: Move deprecation note out of SocketAddress doc comment qapi/machine: Clarify query-uuid value when none has been specified qapi/machine: Clean up documentation around CpuInstanceProperties qapi/pci: Clean up documentation around PciDeviceClass qapi/qom: Document feature unstable of @x-vfio-user-server Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2024-07-17meson: Update meson-buildoptions.shZhao Liu
Update meson-buildoptions.sh to stay in sync with meson_options.txt. Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-07-17backends/rng-random: Get rid of qemu_open_old()Zhao Liu
For qemu_open_old(), osdep.h said: > Don't introduce new usage of this function, prefer the following > qemu_open/qemu_create that take an "Error **errp". So replace qemu_open_old() with qemu_open(). And considering rng_random_opened() will lose its obvious error handling case after removing error_setg_file_open(), add comment to remind here. Cc: Laurent Vivier <lvivier@redhat.com> Cc: Amit Shah <amit@kernel.org> Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> (mjt: drop superfluous commit as suggested by philmd) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-07-17backends/iommufd: Get rid of qemu_open_old()Zhao Liu
For qemu_open_old(), osdep.h said: > Don't introduce new usage of this function, prefer the following > qemu_open/qemu_create that take an "Error **errp". So replace qemu_open_old() with qemu_open(). Cc: Yi Liu <yi.l.liu@intel.com> Cc: Eric Auger <eric.auger@redhat.com> Cc: Zhenzhong Duan <zhenzhong.duan@intel.com> Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Yi Liu <yi.l.liu@intel.com> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-07-17backends/hostmem-epc: Get rid of qemu_open_old()Zhao Liu
For qemu_open_old(), osdep.h said: > Don't introduce new usage of this function, prefer the following > qemu_open/qemu_create that take an "Error **errp". So replace qemu_open_old() with qemu_open(). Cc: David Hildenbrand <david@redhat.com> Cc: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-07-17hw/vfio/container: Get rid of qemu_open_old()Zhao Liu
For qemu_open_old(), osdep.h said: > Don't introduce new usage of this function, prefer the following > qemu_open/qemu_create that take an "Error **errp". So replace qemu_open_old() with qemu_open(). Cc: Alex Williamson <alex.williamson@redhat.com> Cc: "Cédric Le Goater" <clg@redhat.com> Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-07-17hw/usb/u2f-passthru: Get rid of qemu_open_old()Zhao Liu
For qemu_open_old(), osdep.h said: > Don't introduce new usage of this function, prefer the following > qemu_open/qemu_create that take an "Error **errp". So replace qemu_open_old() with qemu_open(). Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-07-17hw/usb/host-libusb: Get rid of qemu_open_old()Zhao Liu
For qemu_open_old(), osdep.h said: > Don't introduce new usage of this function, prefer the following > qemu_open/qemu_create that take an "Error **errp". So replace qemu_open_old() with qemu_open(). Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-07-17hw/i386/sgx: Get rid of qemu_open_old()Zhao Liu
For qemu_open_old(), osdep.h said: > Don't introduce new usage of this function, prefer the following > qemu_open/qemu_create that take an "Error **errp". So replace qemu_open_old() with qemu_open(). And considering the SGX enablement description is useful, convert it into a error message hint. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Eduardo Habkost <eduardo@habkost.net> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-07-17tests/avocado: Remove the non-working virtio_check_params testThomas Huth
The test has been marked as broken more than 4 years ago [*], and so far nobody ever cared to fix it. Thus let's simply remove it now ... if somebody ever needs it again, they can restore the file from an older version of QEMU. [*] https://lore.kernel.org/qemu-devel/4bbe9ff8-e1a8-917d-5a57-ce5185da19fa@redhat.com/ Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> (mjt: add reference as suggested by philm) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>