aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-05-14Merge remote-tracking branch ↵Peter Maydell
'remotes/dgilbert/tags/pull-migration-20210513a' into staging Migration pull 2021-05-13 Fix of the 2021-05-11 version, with a fix to build on the armhf cross. The largest change in this set is David's changes for ram block size changing; then there's a pile of other cleanups and fixes. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> # gpg: Signature made Thu 13 May 2021 18:36:06 BST # gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7 # gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full] # Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7 * remotes/dgilbert/tags/pull-migration-20210513a: tests/migration: introduce multifd into guestperf tests/qtest/migration-test: Use g_autofree to avoid leaks on error paths tests/migration-test: Fix "true" vs true migration/ram: Use offset_in_ramblock() in range checks migration/multifd: Print used_length of memory block migration/ram: Handle RAM block resizes during postcopy migration/ram: Simplify host page handling in ram_load_postcopy() migration/ram: Discard RAM when growing RAM blocks after ram_postcopy_incoming_init() exec: Relax range check in ram_block_discard_range() migration/ram: Handle RAM block resizes during precopy numa: Make all callbacks of ram block notifiers optional numa: Teach ram block notifiers about resizeable ram blocks util: vfio-helpers: Factor out and fix processing of existing ram blocks migration: Drop redundant query-migrate result @blocked migration/ram: Optimize ram_save_host_page() migration/ram: Reduce unnecessary rate limiting migrate/ram: remove "ram_bulk_stage" and "fpo_enabled" Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-05-13Merge remote-tracking branch 'remotes/armbru/tags/pull-misc-2021-05-12' into ↵Peter Maydell
staging Miscellaneous patches for 2021-05-12 # gpg: Signature made Wed 12 May 2021 17:22:15 BST # gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653 # gpg: issuer "armbru@redhat.com" # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full] # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full] # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-misc-2021-05-12: Drop the deprecated unicore32 target Drop the deprecated lm32 target block: Drop the sheepdog block driver Remove the deprecated moxie target monitor/qmp: fix race on CHR_EVENT_CLOSED without OOB Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-05-13tests/migration: introduce multifd into guestperfHyman
Guestperf tool does not cover the multifd-enabled migration currently, it is worth supporting so that developers can analysis the migration performance with all kinds of migration. To request that multifd is enabled, with 4 channels: $ ./tests/migration/guestperf.py \ --multifd --multifd-channels 4 --output output.json To run the entire standardized set of multifd-enabled comparisons, with unix migration: $ ./tests/migration/guestperf-batch.py \ --dst-host localhost --transport unix \ --filter compr-multifd* --output outputdir Signed-off-by: Hyman Huang(黄勇) <huangy81@chinatelecom.cn> Message-Id: <cfeeb04d17ad932c42a9871294058b77429ad1b7.1616171924.git.huangy81@chinatelecom.cn> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-05-13tests/qtest/migration-test: Use g_autofree to avoid leaks on error pathsPeter Maydell
Coverity notices that several places in the migration-test code fail to free memory in error-exit paths. This is pretty unimportant in test case code, but we can avoid having to manually free the memory entirely by using g_autofree. The places where Coverity spotted a leak were relating to early exits not freeing 'uri' in test_precopy_unix(), do_test_validate_uuid(), migrate_postcopy_prepare() and test_migrate_auto_converge(). This patch converts all the string-allocation in the test code to g_autofree for consistency. Fixes: Coverity CID 1432313, 1432315, 1432352, 1432364 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20210506185819.9010-1-peter.maydell@linaro.org> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-05-13tests/migration-test: Fix "true" vs trueDr. David Alan Gilbert
Accidental use of "true" as a boolean; spotted by coverity and Peter. Fixes: b99784ef6c3 Fixes: d795f47466e Reported-by: Peter Maydell <peter.maydell@linaro.org> Reported-by: Coverity (CID 1432373, 1432292, 1432288) Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20210504100545.112213-1-dgilbert@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-05-13migration/ram: Use offset_in_ramblock() in range checksDavid Hildenbrand
We never read or write beyond the used_length of memory blocks when migrating. Make this clearer by using offset_in_ramblock() consistently. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20210429112708.12291-11-david@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-05-13migration/multifd: Print used_length of memory blockDavid Hildenbrand
We actually want to print the used_length, against which we check. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20210429112708.12291-10-david@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-05-13migration/ram: Handle RAM block resizes during postcopyDavid Hildenbrand
Resizing while migrating is dangerous and does not work as expected. The whole migration code works with the usable_length of a ram block and does not expect this value to change at random points in time. In the case of postcopy, relying on used_length is racy as soon as the guest is running. Also, when used_length changes we might leave the uffd handler registered for some memory regions, reject valid pages when migrating and fail when sending the recv bitmap to the source. Resizing can be trigger *after* (but not during) a reset in ACPI code by the guest - hw/arm/virt-acpi-build.c:acpi_ram_update() - hw/i386/acpi-build.c:acpi_ram_update() Let's remember the original used_length in a separate variable and use it in relevant postcopy code. Make sure to update it when we resize during precopy, when synchronizing the RAM block sizes with the source. Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20210429112708.12291-9-david@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-05-13migration/ram: Simplify host page handling in ram_load_postcopy()David Hildenbrand
Add two new helper functions. This will come in come handy once we want to handle ram block resizes while postcopy is active. Note that ram_block_from_stream() will already print proper errors. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20210429112708.12291-8-david@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> dgilbert: Added brackets in host_page_from_ram_block_offset to cause uintptr_t to cast the sum, to fix armhf-cross build
2021-05-13migration/ram: Discard RAM when growing RAM blocks after ↵David Hildenbrand
ram_postcopy_incoming_init() In case we grow our RAM after ram_postcopy_incoming_init() (e.g., when synchronizing the RAM block state with the migration source), the resized part would not get discarded. Let's perform that when being notified about a resize while postcopy has been advised, but is not listening yet. With precopy, the process is as following: 1. VM created - RAM blocks are created 2. Incomming migration started - Postcopy is advised - All pages in RAM blocks are discarded 3. Precopy starts - RAM blocks are resized to match the size on the migration source. - RAM pages from precopy stream are loaded - Uffd handler is registered, postcopy starts listening 4. Guest started, postcopy running - Pagefaults get resolved, pages get placed Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20210429112708.12291-7-david@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-05-13exec: Relax range check in ram_block_discard_range()David Hildenbrand
We want to make use of ram_block_discard_range() in the RAM block resize callback when growing a RAM block, *before* used_length is changed. Let's relax the check. As RAM blocks always mmap the whole max_length area, we cannot corrupt unrelated data. Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20210429112708.12291-6-david@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-05-13migration/ram: Handle RAM block resizes during precopyDavid Hildenbrand
Resizing while migrating is dangerous and does not work as expected. The whole migration code works on the usable_length of ram blocks and does not expect this to change at random points in time. In the case of precopy, the ram block size must not change on the source, after syncing the RAM block list in ram_save_setup(), so as long as the guest is still running on the source. Resizing can be trigger *after* (but not during) a reset in ACPI code by the guest - hw/arm/virt-acpi-build.c:acpi_ram_update() - hw/i386/acpi-build.c:acpi_ram_update() Use the ram block notifier to get notified about resizes. Let's simply cancel migration and indicate the reason. We'll continue running on the source. No harm done. Update the documentation. Postcopy will be handled separately. Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20210429112708.12291-5-david@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Manual merge
2021-05-13numa: Make all callbacks of ram block notifiers optionalDavid Hildenbrand
Let's make add/remove optional. We want to introduce a RAM block notifier for RAM migration that is only interested in resize events. Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20210429112708.12291-4-david@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-05-13numa: Teach ram block notifiers about resizeable ram blocksDavid Hildenbrand
Ram block notifiers are currently not aware of resizes. To properly handle resizes during migration, we want to teach ram block notifiers about resizeable ram. Introduce the basic infrastructure but keep using max_size in the existing notifiers. Supply the max_size when adding and removing ram blocks. Also, notify on resizes. Acked-by: Paul Durrant <paul@xen.org> Reviewed-by: Peter Xu <peterx@redhat.com> Cc: xen-devel@lists.xenproject.org Cc: haxm-team@intel.com Cc: Paul Durrant <paul@xen.org> Cc: Stefano Stabellini <sstabellini@kernel.org> Cc: Anthony Perard <anthony.perard@citrix.com> Cc: Wenchao Wang <wenchao.wang@intel.com> Cc: Colin Xu <colin.xu@intel.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20210429112708.12291-3-david@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-05-13util: vfio-helpers: Factor out and fix processing of existing ram blocksDavid Hildenbrand
Factor it out into common code when a new notifier is registered, just as done with the memory region notifier. This keeps logic about how to process existing ram blocks at a central place. Just like when adding a new ram block, we have to register the max_length. Ram blocks are only "fake resized". All memory (max_length) is mapped. Print the warning from inside qemu_vfio_ram_block_added(). Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20210429112708.12291-2-david@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-05-13migration: Drop redundant query-migrate result @blockedMarkus Armbruster
Result @blocked is redundant. Unfortunately, we realized this too close to the release to risk dropping it, so we deprecated it instead, in commit e11ce6c06. Since it was deprecated from the start, we can delete it without the customary grace period. Do so. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20210429140424.2802929-1-armbru@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-05-13migration/ram: Optimize ram_save_host_page()Kunkun Jiang
Starting from pss->page, ram_save_host_page() will check every page and send the dirty pages up to the end of the current host page or the boundary of used_length of the block. If the host page size is a huge page, the step "check" will take a lot of time. It will improve performance to use migration_bitmap_find_dirty(). Tested on Kunpeng 920; VM parameters: 1U 4G (page size 1G) The time of ram_save_host_page() in the last round of ram saving: before optimize: 9250us after optimize: 34us Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com> Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-Id: <20210316125716.1243-3-jiangkunkun@huawei.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-05-13migration/ram: Reduce unnecessary rate limitingKunkun Jiang
When the host page is a huge page and something is sent in the current iteration, migration_rate_limit() should be executed. If not, it can be omitted. Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com> Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com> Reviewed-by: David Edmondson <david.edmondson@oracle.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20210316125716.1243-2-jiangkunkun@huawei.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-05-13migrate/ram: remove "ram_bulk_stage" and "fpo_enabled"David Hildenbrand
The bulk stage is kind of weird: migration_bitmap_find_dirty() will indicate a dirty page, however, ram_save_host_page() will never save it, as migration_bitmap_clear_dirty() detects that it is not dirty. We already fill the bitmap in ram_list_init_bitmaps() with ones, marking everything dirty - it didn't used to be that way, which is why we needed an explicit first bulk stage. Let's simplify: make the bitmap the single source of thuth. Explicitly handle the "xbzrle_enabled after first round" case. Regarding XBZRLE (implicitly handled via "ram_bulk_stage = false" right now), there is now a slight change in behavior: - Colo: When starting, it will be disabled (was implicitly enabled) until the first round actually finishes. - Free page hinting: When starting, XBZRLE will be disabled (was implicitly enabled) until the first round actually finished. - Snapshots: When starting, XBZRLE will be disabled. We essentially only do a single run, so I guess it will never actually get disabled. Postcopy seems to indirectly disable it in ram_save_page(), so there shouldn't be really any change. Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Juan Quintela <quintela@redhat.com> Cc: "Dr. David Alan Gilbert" <dgilbert@redhat.com> Cc: Andrey Gruzdev <andrey.gruzdev@virtuozzo.com> Cc: Peter Xu <peterx@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20210216105039.40680-1-david@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-05-13Merge remote-tracking branch 'remotes/philmd/tags/pflash-20210511' into stagingPeter Maydell
Parallel NOR Flash patches queue - Simplify memory layout when no pflash_cfi02 mapping requested # gpg: Signature made Tue 11 May 2021 17:12:58 BST # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * remotes/philmd/tags/pflash-20210511: hw/block/pflash_cfi02: Do not create aliases when not necessary hw/block/pflash_cfi02: Set romd mode in pflash_cfi02_realize() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-05-12Merge remote-tracking branch ↵Peter Maydell
'remotes/alistair/tags/pull-riscv-to-apply-20210511' into staging A large collection of RISC-V fixes, improvements and features - Clenaup some left over v1.9 code - Documentation improvements - Support for the shakti_c machine - Internal cleanup of the CSR accesses - Updates to the OpenTitan platform - Support for the virtio-vga - Fix for the saturate subtract in vector extensions - Experimental support for the ePMP spec - A range of other internal code cleanups and bug fixes # gpg: Signature made Tue 11 May 2021 11:17:10 BST # gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054 # gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full] # Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054 * remotes/alistair/tags/pull-riscv-to-apply-20210511: (42 commits) target/riscv: Fix the RV64H decode comment target/riscv: Consolidate RV32/64 16-bit instructions target/riscv: Consolidate RV32/64 32-bit instructions target/riscv: Remove an unused CASE_OP_32_64 macro target/riscv: Remove the unused HSTATUS_WPRI macro target/riscv: Remove the hardcoded SATP_MODE macro target/riscv: Remove the hardcoded MSTATUS_SD macro target/riscv: Remove the hardcoded HGATP_MODE macro target/riscv: Remove the hardcoded SSTATUS_SD macro target/riscv: Remove the hardcoded RVXLEN macro target/riscv: fix a typo with interrupt names fpu/softfloat: set invalid excp flag for RISC-V muladd instructions hw/riscv: Fix OT IBEX reset vector target/riscv: fix exception index on instruction access fault target/riscv: fix vrgather macro index variable type bug target/riscv: Add ePMP support for the Ibex CPU target/riscv/pmp: Remove outdated comment target/riscv: Add a config option for ePMP target/riscv: Implementation of enhanced PMP (ePMP) target/riscv: Add ePMP CSR access functions ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-05-12Drop the deprecated unicore32 targetMarkus Armbruster
Target unicore32 was deprecated in commit 8e4ff4a8d2b, v5.2.0. See there for rationale. Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20210503084034.3804963-3-armbru@redhat.com> Acked-by: Thomas Huth <thuth@redhat.com>
2021-05-12Drop the deprecated lm32 targetMarkus Armbruster
Target lm32 was deprecated in commit d8498005122, v5.2.0. See there for rationale. Some of its code lives on in device models derived from milkymist ones: hw/char/digic-uart.c and hw/display/bcm2835_fb.c. Cc: Michael Walle <michael@walle.cc> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20210503084034.3804963-2-armbru@redhat.com> Acked-by: Michael Walle <michael@walle.cc> [Trivial conflicts resolved, reST markup fixed]
2021-05-12block: Drop the sheepdog block driverMarkus Armbruster
It was deprecated in commit e1c4269763, v5.2.0. See that commit message for rationale. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20210501075747.3293186-1-armbru@redhat.com> ACKed-by: Peter Krempa <pkrempa@redhat.com>
2021-05-12Remove the deprecated moxie targetThomas Huth
There are no known users of this CPU anymore, and there are no binaries available online which could be used for regression tests, so the code has likely completely bit-rotten already. It's been marked as deprecated since two releases now and nobody spoke up that there is still a need to keep it, thus let's remove it now. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20210430160355.698194-1-thuth@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> [Commit message typos fixed, trivial conflicts resolved] Signed-off-by: Markus Armbruster <armbru@redhat.com>
2021-05-12monitor/qmp: fix race on CHR_EVENT_CLOSED without OOBStefan Reiter
The QMP dispatcher coroutine holds the qmp_queue_lock over a yield point, where it expects to be rescheduled from the main context. If a CHR_EVENT_CLOSED event is received just then, it can race and block the main thread on the mutex in monitor_qmp_cleanup_queue_and_resume. monitor_resume does not need to be called from main context, so we can call it immediately after popping a request from the queue, which allows us to drop the qmp_queue_lock mutex before yielding. Suggested-by: Wolfgang Bumiller <w.bumiller@proxmox.com> Signed-off-by: Stefan Reiter <s.reiter@proxmox.com> Message-Id: <20210322154024.15011-1-s.reiter@proxmox.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Cc: qemu-stable@nongnu.org Signed-off-by: Markus Armbruster <armbru@redhat.com>
2021-05-12Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into ↵Peter Maydell
staging * AccelCPUClass and sysemu/user split for i386 (Claudio) * i386 page walk unification * Fix detection of gdbus-codegen * Misc refactoring # gpg: Signature made Wed 12 May 2021 09:39:29 BST # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini-gitlab/tags/for-upstream: (32 commits) coverity-scan: list components, move model to scripts/coverity-scan configure: fix detection of gdbus-codegen qemu-option: support accept-any QemuOptsList in qemu_opts_absorb_qdict main-loop: remove dead code target/i386: use mmu_translate for NPT walk target/i386: allow customizing the next phase of the translation target/i386: extend pg_mode to more CR0 and CR4 bits target/i386: pass cr3 to mmu_translate target/i386: extract mmu_translate target/i386: move paging mode constants from SVM to cpu.h target/i386: merge SVM_NPTEXIT_* with PF_ERROR_* constants accel: add init_accel_cpu for adapting accel behavior to CPU type accel: move call to accel_init_interfaces i386: make cpu_load_efer sysemu-only target/i386: gdbstub: only write CR0/CR2/CR3/EFER for sysemu target/i386: gdbstub: introduce aux functions to read/write CS64 regs i386: split off sysemu part of cpu.c i386: split seg_helper into user-only and sysemu parts i386: split svm_helper into sysemu and stub-only user i386: separate fpu_helper sysemu-only parts ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-05-12Merge remote-tracking branch 'remotes/kraxel/tags/vga-20210510-pull-request' ↵Peter Maydell
into staging edid: display id support (for 5k+), bugfixes. virtio-gpu: iommu fix, device split. # gpg: Signature made Mon 10 May 2021 14:20:36 BST # gpg: using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/vga-20210510-pull-request: (25 commits) virtio-gpu: add virtio-vga-gl modules: add have_vga virtio-gpu: add virtio-gpu-gl-pci virtio-gpu: move fields to struct VirtIOGPUGL virtio-gpu: drop use_virgl_renderer virtio-gpu: move virtio-gpu-gl-device to separate module virtio-gpu: drop VIRGL() macro virtio-gpu: move update_cursor_data virtio-gpu: move virgl process_cmd virtio-gpu: move virgl gl_flushed virtio-gpu: move virgl handle_ctrl virtio-gpu: use class function for ctrl queue handlers virtio-gpu: move virgl reset virtio-gpu: move virgl realize + properties virtio-gpu: add virtio-gpu-gl-device virtio-gpu: rename virgl source file. virtio-gpu: handle partial maps properly edid: add support for DisplayID extension (5k resolution) edid: allow arbitrary-length checksums edid: move timing generation into a separate function ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-05-12coverity-scan: list components, move model to scripts/coverity-scanPaolo Bonzini
Place all files that can be useful to rebuild the Coverity configuration in scripts/coverity-scan: the existing model file, and the components setup. The Markdown syntax was tested with Pandoc (but in any case is meant more as a human-readable reference than as a part of documentation). Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-05-12configure: fix detection of gdbus-codegenPaolo Bonzini
"pkg-config --variable=gdbus_codegen gio-2.0" returns "gdbus-codegen", and it does not pass test -x (which does not walk the path). Meson 0.58.0 notices that something is iffy, as the dbus_vmstate1 assignment in tests/qtest/meson.build uses an empty string as the command, and fails very eloquently: ../tests/qtest/meson.build:92:2: ERROR: No program name specified. Use the "has" function instead of test -x, and fix the generation of config-host.mak since meson.build expects that GDBUS_CODEGEN is absent, rather than empty, if the tool is unavailable. Reported-by: Sebastian Mitterle <smitterl@redhat.com> Fixes: #178 Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-05-12qemu-option: support accept-any QemuOptsList in qemu_opts_absorb_qdictPaolo Bonzini
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-05-12Merge remote-tracking branch 'remotes/aperard/tags/pull-xen-20210510' into ↵Peter Maydell
staging Xen patches - Avoid mmap race involving Xen's mapcache - Fix xenforeignmemory_resource leak at exit - Fix xen-block to choose a driver for the disk image when created via xenstore. # gpg: Signature made Mon 10 May 2021 13:49:40 BST # gpg: using RSA key F80C006308E22CFD8A92E7980CF5572FD7FB55AF # gpg: Good signature from "Anthony PERARD <anthony.perard@gmail.com>" [unknown] # gpg: aka "Anthony PERARD <anthony.perard@citrix.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 5379 2F71 024C 600F 778A 7161 D8D5 7199 DF83 42C8 # Subkey fingerprint: F80C 0063 08E2 2CFD 8A92 E798 0CF5 572F D7FB 55AF * remotes/aperard/tags/pull-xen-20210510: xen-block: Use specific blockdev driver xen: Free xenforeignmemory_resource at exit xen-mapcache: avoid a race on memory map while using MAP_FIXED Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-05-11Merge remote-tracking branch ↵Peter Maydell
'remotes/thuth-gitlab/tags/s390-ccw-bios-2021-05-10' into staging * Make the s390-ccw bios compilable with Clang * Fix ECKD booting with null block numbers in the chain # gpg: Signature made Mon 10 May 2021 08:27:34 BST # gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5 # gpg: issuer "thuth@redhat.com" # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [full] # gpg: aka "Thomas Huth <thuth@redhat.com>" [full] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [full] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * remotes/thuth-gitlab/tags/s390-ccw-bios-2021-05-10: pc-bios/s390: Update the s390-ccw bios binaries with the Clang and other fixes pc-bios/s390-ccw: Allow building with Clang, too pc-bios/s390-ccw: Silence GCC 11 stringop-overflow warning pc-bios/s390-ccw: Fix the cc-option macro in the Makefile pc-bios/s390-ccw: Silence warning from Clang by marking panic() as noreturn pc-bios/s390-ccw/netboot: Use "-Wl," prefix to pass parameter to the linker pc-bios/s390-ccw: Use reset_psw pointer instead of hard-coded null pointer pc-bios/s390-ccw/bootmap: Silence compiler warning from Clang pc-bios/s390-ccw: don't try to read the next block if end of chunk is reached Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-05-11hw/block/pflash_cfi02: Do not create aliases when not necessaryPhilippe Mathieu-Daudé
When no mapping is requested, it is pointless to create alias regions. Only create them when multiple mappings are requested to simplify the memory layout. The flatview is not changed. For example using 'qemu-system-sh4 -M r2d -S -monitor stdio', * before: (qemu) info mtree address-space: memory 0000000000000000-ffffffffffffffff (prio 0, i/o): system 0000000000000000-0000000000ffffff (prio 0, i/o): pflash 0000000000000000-0000000000ffffff (prio 0, romd): alias pflash-alias @r2d.flash 0000000000000000-0000000000ffffff 0000000004000000-000000000400003f (prio 0, i/o): r2d-fpga 000000000c000000-000000000fffffff (prio 0, ram): r2d.sdram (qemu) info mtree -f FlatView #0 AS "memory", root: system AS "cpu-memory-0", root: system Root memory region: system 0000000000000000-0000000000ffffff (prio 0, romd): r2d.flash 0000000004000000-000000000400003f (prio 0, i/o): r2d-fpga 000000000c000000-000000000fffffff (prio 0, ram): r2d.sdram * after: (qemu) info mtree address-space: memory 0000000000000000-ffffffffffffffff (prio 0, i/o): system 0000000000000000-0000000000ffffff (prio 0, romd): r2d.flash 0000000004000000-000000000400003f (prio 0, i/o): r2d-fpga 000000000c000000-000000000fffffff (prio 0, ram): r2d.sdram (qemu) info mtree -f FlatView #0 AS "memory", root: system AS "cpu-memory-0", root: system Root memory region: system 0000000000000000-0000000000ffffff (prio 0, romd): r2d.flash 0000000004000000-000000000400003f (prio 0, i/o): r2d-fpga 000000000c000000-000000000fffffff (prio 0, ram): r2d.sdram Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210325120921.858993-3-f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2021-05-11hw/block/pflash_cfi02: Set romd mode in pflash_cfi02_realize()Philippe Mathieu-Daudé
The ROMD mode isn't related to mapping setup. Ideally we'd set this mode when the state machine resets, but for now simply move it to pflash_cfi02_realize() to not introduce logical change. Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210325120921.858993-2-f4bug@amsat.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2021-05-11Merge remote-tracking branch ↵Peter Maydell
'remotes/dgilbert-gitlab/tags/pull-virtiofs-20210506' into staging virtiofsd pull 2021-05-06 A pile of cleanups: Use of glib allocators from Mahmoud Virtio spec compliance and printf cleanup from me. Sugar to turn on xattr when defining xattr mapping from Carlos an assert cleanup from Greg Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> # gpg: Signature made Thu 06 May 2021 19:54:18 BST # gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7 # gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full] # Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7 * remotes/dgilbert-gitlab/tags/pull-virtiofs-20210506: virtiofsd/fuse_virtio.c: Changed allocations of locals to GLib virtiofsd/passthrough_ll.c: Changed local allocations to GLib functions virtiofsd: Changed allocations of fv_VuDev & its internals to GLib functions virtiofsd: Changed allocation of lo_map_elems to GLib's functions virtiofsd: Changed allocations of fuse_session to GLib's functions virtiofsd: Changed allocations of iovec to GLib's functions virtiofsd: Changed allocations of fuse_req to GLib functions virtiofsd: Don't assume header layout virtiofs: Fixup printf args virtiofsd: Add help for -o xattr-mapping virtiofsd: Allow use "-o xattrmap" without "-o xattr" virtiofsd: Fix side-effect in assert() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-05-11target/riscv: Fix the RV64H decode commentAlistair Francis
BugLink: https://gitlab.com/qemu-project/qemu/-/issues/47 Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 024ce841221c1d15c74b253512428c4baca7e4ba.1619234854.git.alistair.francis@wdc.com
2021-05-11target/riscv: Consolidate RV32/64 16-bit instructionsAlistair Francis
This patch removes the insn16-32.decode and insn16-64.decode decode files and consolidates the instructions into the general RISC-V insn16.decode decode tree. This means that all of the instructions are avaliable in both the 32-bit and 64-bit builds. This also means that we run a check to ensure we are running a 64-bit softmmu before we execute the 64-bit only instructions. This allows us to include the 32-bit instructions in the 64-bit build, while also ensuring that 32-bit only software can not execute the instructions. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 01e2b0efeae311adc7ebf133c2cde6a7a37224d7.1619234854.git.alistair.francis@wdc.com
2021-05-11target/riscv: Consolidate RV32/64 32-bit instructionsAlistair Francis
This patch removes the insn32-64.decode decode file and consolidates the instructions into the general RISC-V insn32.decode decode tree. This means that all of the instructions are avaliable in both the 32-bit and 64-bit builds. This also means that we run a check to ensure we are running a 64-bit softmmu before we execute the 64-bit only instructions. This allows us to include the 32-bit instructions in the 64-bit build, while also ensuring that 32-bit only software can not execute the instructions. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: db709360e2be47d2f9c6483ab973fe4791aefa77.1619234854.git.alistair.francis@wdc.com
2021-05-11target/riscv: Remove an unused CASE_OP_32_64 macroAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 4853459564af35a6690120c74ad892f60cec35ff.1619234854.git.alistair.francis@wdc.com
2021-05-11target/riscv: Remove the unused HSTATUS_WPRI macroAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: e095b57af0d419c8ed822958f04dfc732d7beb7e.1619234854.git.alistair.francis@wdc.com
2021-05-11target/riscv: Remove the hardcoded SATP_MODE macroAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 6b701769d6621f45ba1739334198e36a64fe04df.1619234854.git.alistair.francis@wdc.com
2021-05-11target/riscv: Remove the hardcoded MSTATUS_SD macroAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: fcc125d96da941b56c817c9dd6068dc36478fc53.1619234854.git.alistair.francis@wdc.com
2021-05-11target/riscv: Remove the hardcoded HGATP_MODE macroAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 665f624bfdc2e3ca64265004b07de7489c77a766.1619234854.git.alistair.francis@wdc.com
2021-05-11target/riscv: Remove the hardcoded SSTATUS_SD macroAlistair Francis
This also ensures that the SD bit is not writable. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 9ea842309f0fd7adff172790f5b5fc058b40f2f1.1619234854.git.alistair.francis@wdc.com
2021-05-11target/riscv: Remove the hardcoded RVXLEN macroAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: a07bc0c6dc4958681b4f93cbc5d0acc31ed3344a.1619234854.git.alistair.francis@wdc.com
2021-05-11target/riscv: fix a typo with interrupt namesEmmanuel Blot
Interrupt names have been swapped in 205377f8 and do not follow IRQ_*_EXT definition order. Signed-off-by: Emmanuel Blot <emmanuel.blot@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210421133236.11323-1-emmanuel.blot@sifive.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-05-11fpu/softfloat: set invalid excp flag for RISC-V muladd instructionsFrank Chang
In IEEE 754-2008 spec: Invalid operation exception is signaled when doing: fusedMultiplyAdd(0, Inf, c) or fusedMultiplyAdd(Inf, 0, c) unless c is a quiet NaN; if c is a quiet NaN then it is implementation defined whether the invalid operation exception is signaled. In RISC-V Unprivileged ISA spec: The fused multiply-add instructions must set the invalid operation exception flag when the multiplicands are Inf and zero, even when the addend is a quiet NaN. This commit set invalid operation execption flag for RISC-V when multiplicands of muladd instructions are Inf and zero. Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20210420013150.21992-1-frank.chang@sifive.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-05-11hw/riscv: Fix OT IBEX reset vectorAlexander Wagner
The IBEX documentation [1] specifies the reset vector to be "the most significant 3 bytes of the boot address and the reset value (0x80) as the least significant byte". [1] https://github.com/lowRISC/ibex/blob/master/doc/03_reference/exception_interrupts.rst Signed-off-by: Alexander Wagner <alexander.wagner@ulal.de> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210420080008.119798-1-alexander.wagner@ulal.de Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-05-11target/riscv: fix exception index on instruction access faultEmmanuel Blot
When no MMU is used and the guest code attempts to fetch an instruction from an invalid memory location, the exception index defaults to a data load access fault, rather an instruction access fault. Signed-off-by: Emmanuel Blot <emmanuel.blot@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: FB9EA197-B018-4879-AB0F-922C2047A08B@sifive.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-21 09:16:18 +0000