| Age | Commit message (Collapse) | Author |
|---|
|
Make vfp_set_fpscr() call vfp_set_fpsr() and vfp_set_fpcr()
instead of the other way around.
The masking we do when getting and setting vfp.xregs[ARM_VFP_FPSCR]
is a little awkward, but we are going to change where we store the
underlying FPSR and FPCR information in a later commit, so it will
go away then.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240628142347.1283015-4-peter.maydell@linaro.org
|
|
In AArch32, the floating point control and status bits are all in a
single register, FPSCR. In AArch64, these were split into separate
FPCR and FPSR registers, but the bit layouts remained the same, with
no overlaps, so that you could construct an FPSCR value by ORing FPCR
and FPSR, or equivalently could produce FPSR and FPCR by masking an
FPSCR value. For QEMU's implementation, we opted to use masking to
produce FPSR and FPCR, because we started with an AArch32
implementation of FPSCR.
The addition of the (AArch64-only) FEAT_AFP adds new bits to the FPCR
which overlap with some bits in the FPSR. This means we'll no longer
be able to consider the FPSCR-encoded value as the primary one, but
instead need to treat FPSR/FPCR as the primary encoding and construct
the FPSCR from those. (This remains possible because the FEAT_AFP
bits in FPCR don't appear in the FPSCR.)
As the first step in this refactoring, make vfp_get_fpscr() call
vfp_get_fpcr() and vfp_get_fpsr(), instead of the other way around.
Note that vfp_get_fpcsr_from_host() returns only bits in the FPSR
(for the cumulative fp exception bits), so we can simply rename
it without needing to add a new function for getting FPCR bits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240628142347.1283015-3-peter.maydell@linaro.org
|
|
The M-profile FPSCR LTPSIZE is bits [18:16]; this is the same
field as A-profile FPSCR Len, not Stride. Correct the comment
in vfp_get_fpscr().
We also implemented M-profile FPSCR.QC, but forgot to delete
a TODO comment from vfp_set_fpscr(); remove it now.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240628142347.1283015-2-peter.maydell@linaro.org
|
|
When opening an image with discard=off, we punch hole in the image when
writing zeroes, making the image sparse. This breaks users that want to
ensure that writes cannot fail with ENOSPACE by using fully allocated
images[1].
bdrv_co_pwrite_zeroes() correctly disables BDRV_REQ_MAY_UNMAP if we
opened the child without discard=unmap or discard=on. But we don't go
through this function when accessing the top node. Move the check down
to bdrv_co_do_pwrite_zeroes() which seems to be used in all code paths.
This change implements the documented behavior, punching holes only when
opening the image with discard=on or discard=unmap. This may not be the
best default but can improve it later.
The test depends on a file system supporting discard, deallocating the
entire file when punching hole with the length of the entire file.
Tested with xfs, ext4, and tmpfs.
[1] https://lists.nongnu.org/archive/html/qemu-discuss/2024-06/msg00003.html
Signed-off-by: Nir Soffer <nsoffer@redhat.com>
Message-id: 20240628202058.1964986-3-nsoffer@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
The test works since we punch holes by default even when opening the
image without discard=on or discard=unmap. Fix the test to enable
discard.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
memory
The error message is actually expressive, considering QEMU only. But
when called from Libvirt, talking about "size" can be confusing, because
in Libvirt "size" translates to the memory backend size in QEMU (maximum
size) and "current" translates to the QEMU "size" property.
Let's simply avoid talking about the "size" property and spell out that
some device memory is still plugged.
Message-ID: <20240416141426.588544-1-david@redhat.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Cc: Liang Cong <lcong@redhat.com>
Cc: Mario Casquero <mcasquer@redhat.com>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
|
|
staging
aspeed queue:
* support AST2700 network
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmaNJCcACgkQUaNDx8/7
# 7KF7pw//So48XdPJhdQukO/PDLGSYL8rRjDfZbQFLLw10MozcZZ/Nz/BCzrNxJRg
# rHP/shyO3XL1YZ6U1LNXk6E845giVriSpRRjGX9CuK4fypM9xom6qAIOtOLeH7hG
# iTMW++IxN/JgVmVOKYn3C+2+odiq6NzZxFrblVtGPUDtNkkC9BaYGHnccMsl5zQh
# LOSPJxqLiiuDjZPqdwa4fMbtEeNTU3A0WLlWxX7yPfJt2T20a4wE6bdWVGcI6fiV
# QbCmLLrMXhuZFx+uT4B2hbHi+hGS5H+F3QBOefum6z+i9NEbfAZSyusd8/qTEify
# fSBqxL4LD6K4WKL1Hg9959cBcm5zWgPXk7znus4E/TZuUTdSHaPC7clESIcYqWPS
# veEAppmHneO4cdmK1m+Gv4gpWD/adS4ZfV7O+C3z149ms0gL4JrK6QndPdE5QuIW
# u47PhIT3oIM0WznnMusoCndFxs6Gl/GBkzdxW0gdoJKBRfymbsroWeZamAWTznbV
# mL8Td8bEP/NcV40cm1PtpZyl7j0MzxcKDUHKv9ioQTXLUpkl5LSsIGmd1m78WRlE
# J6bUJ3jqQT6/s5i3TVqTGe7xuqMkg+9Er8rn5nAWgSronsf4nprAfOU8Lj+b06BM
# YRroGgU2lAQrv17liQExrG3Tj1SH+oEp1q0qEq7qo824HlGjBkI=
# =UygB
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 09 Jul 2024 04:51:03 AM PDT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20240709' of https://github.com/legoater/qemu:
machine_aspeed.py: update to test network for AST2700
machine_aspeed.py: update to test ASPEED OpenBMC SDK v09.02 for AST2700
hw/block: m25p80: support quad mode for w25q01jvq
aspeed/soc: set dma64 property for AST2700 ftgmac100
hw/net:ftgmac100: update TX and RX packet buffers address to 64 bits
hw/net:ftgmac100: introduce TX and RX ring base address high registers to support 64 bits
hw/net:ftgmac100: update ring base address to 64 bits
hw/net:ftgmac100: update memory region size to 64KB
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
vfio queue:
* Fixes on VFIO display
* VIRTIO-IOMMU/HostIOMMUDevice: Fixes and page size mask rework
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmaNI6MACgkQUaNDx8/7
# 7KHMCQ//VrdayFV9psHCCkrku3MQL6VWsiTOf6bgOFz4zp716HQrnZlI6A7L1qFz
# p2OH6bQu9IDa8T65TVyQ/u6LL3VkZGAcji++YQQHYD1uNZryURq7IosxmoLnb5L/
# FcBp22rmYx7/0nBF8VW6SttVXAlVAmxe1dwEdmQNL+YJDmhayS7lTiUgx3mWjgUZ
# 0lSvz5w+LWZIuHKLK/o0Fo8Lr4y63nCUxPukl46mjntciEd16zpaCv4ySCf/y83q
# MtRiBhD1+zuV9Kzla1CpwwRKPGccimksXGpmdAVGTUmzfK/ElA8sMB5KDFVDEhdD
# 6iqWcdP7MdZIsCC9qXaOqLPyeqSYZ58LgqUOt4tTW9eiGf6eORqHNRqtStR98pDl
# W+SfCj6AY8wRktKSldb+BKE+XJ/7AD24Lxz2iD6RI7hWwWnalu9z6XpZD1QMqUvw
# h+XjIycp1bNgm7i5indA2B1zotT9ebI8AEEAUMbQOMrtMWqZzGORfI8rhS1s4A+B
# Kh37ll6jAVtYgaifercDQa/PFYyp4dIFZDbWt4WiFYxX51YkpnI3GJKDmIT2or7u
# X2o43rk9sp4xHlsge4pT7epoDzgmuv6fIygfxSPKOp9znrWlAVMX7DniN92SnRke
# xyvCxE2Jps9p0Y7cfaM4VZsWIgHk+IB3hr4wrlRwRKa3sPH4fwU=
# =glZK
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 09 Jul 2024 04:48:51 AM PDT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-vfio-20240709' of https://github.com/legoater/qemu:
vfio/display: Fix vfio_display_edid_init() error path
vfio/display: Fix potential memleak of edid info
virtio-iommu: Revert transient enablement of IOMMU MR in bypass mode
memory: remove IOMMU MR iommu_set_page_size_mask() callback
virtio-iommu : Retrieve page size mask on virtio_iommu_set_iommu_device()
HostIOMMUDevice: Introduce get_page_size_mask() callback
HostIOMMUDevice : remove Error handle from get_iova_ranges callback
vfio-container-base: Introduce vfio_container_get_iova_ranges() helper
virtio-iommu: Fix error handling in virtio_iommu_set_host_iova_ranges()
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
vfio_display_edid_init() can fail for many reasons and return silently.
It would be good to report the error.
Old mdev driver may not support vfio edid region and we allow to go
through in this case.
vfio_display_edid_update() isn't changed because it can be called at
runtime when UI changes (i.e. window resize).
Fixes: 08479114b0de ("vfio/display: add edid support.")
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
|
|
EDID related device region info is leaked in vfio_display_edid_init()
error path and VFIODisplay destroying path.
Fixes: 08479114b0de ("vfio/display: add edid support.")
Signed-off-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
|
|
In 94df5b2180d6 ("virtio-iommu: Fix 64kB host page size VFIO device
assignment"), in case of bypass mode, we transiently enabled the
IOMMU MR to allow the set_page_size_mask() to be called and pass
information about the page size mask constraint of cold plugged
VFIO devices. Now we do not use the IOMMU MR callback anymore, we
can just get rid of this hack.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Everything is now in place to use the Host IOMMU Device callbacks
to retrieve the page size mask usable with a given assigned device.
This new method brings the advantage to pass the info much earlier
to the virtual IOMMU and before the IOMMU MR gets enabled. So let's
remove the call to memory_region_iommu_set_page_size_mask in
vfio common.c and remove the single implementation of the IOMMU MR
callback in the virtio-iommu.c
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Retrieve the Host IOMMU Device page size mask when this latter is set.
This allows to get the information much sooner than when relying on
IOMMU MR set_page_size_mask() call, whcih happens when the IOMMU MR
gets enabled. We introduce check_page_size_mask() helper whose code
is inherited from current virtio_iommu_set_page_size_mask()
implementation. This callback will be removed in a subsequent patch.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
|
|
This callback will be used to retrieve the page size mask supported
along a given Host IOMMU device.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
|
|
The error handle argument is not used anywhere. let's remove it.
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Introduce vfio_container_get_iova_ranges() to retrieve the usable
IOVA regions of the base container and use it in the Host IOMMU
device implementations of get_iova_ranges() callback.
We also fix a UAF bug as the list was shallow copied while
g_list_free_full() was used both on the single call site, in
virtio_iommu_set_iommu_device() but also in
vfio_container_instance_finalize(). Instead use g_list_copy_deep.
Fixes: cf2647a76e ("virtio-iommu: Compute host reserved regions")
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Suggested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
|
|
In case no IOMMUPciBus/IOMMUDevice are found we need to properly
set the error handle and return.
Fixes : Coverity CID 1549006
Signed-off-by: Eric Auger <eric.auger@redhat.com>
Fixes: cf2647a76e ("virtio-iommu: Compute host reserved regions")
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Update test case to test network connection via SSH.
Test command:
```
cd build
pyvenv/bin/avocado run ../qemu/tests/avocado/machine_aspeed.py:AST2x00MachineSDK.test_aarch64_ast2700_evb_sdk_v09_02
```
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
|
|
Update test case to test ASPEED OpenBMC SDK v09.02 for AST2700.
ASPEED fixed TX mask issue from linux/drivers/ftgmac100.c.
It is required to use ASPEED OpenBMC SDK since v09.02
for AST2700 QEMU network testing.
A test image is downloaded from the ASPEED Forked OpenBMC GitHub
release repository :
https://github.com/AspeedTech-BMC/openbmc/releases/
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
|
|
According to the w25q01jv datasheet at page 16,
it is required to set QE bit in "Status Register 2".
Besides, users are able to utilize "Write Status Register 1(0x01)"
command to set QE bit in "Status Register 2" and
utilize "Read Status Register 2(0x35)" command to get the QE bit status.
To support quad mode for w25q01jvq, update collecting data needed
2 bytes for WRSR command in decode_new_cmd function and
verify QE bit at the second byte of collecting data bit 2
in complete_collecting_data.
Update RDCR_EQIO command to set bit 2 of return data
if quad mode enable in decode_new_cmd.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
|
|
ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35)
And the base address of dram is "0x4 00000000" which
is 64bits address.
Set dma64 property for ftgmac100 model to support
64bits dram address DMA.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
|
|
ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35)
And the base address of dram is "0x4 00000000" which
is 64bits address.
It have "TXDES 2" and "RXDES 2" to save the high part
physical address of packet buffer.
Ex: TX packet buffer address [34:0]
The "TXDES 2" bits [18:16] which corresponds the bits [34:32]
of the 64 bits address of the TX packet buffer address
and "TXDES 3" bits [31:0] which corresponds the bits [31:0]
of the 64 bits address of the TX packet buffer address.
Update TX and RX packet buffers address type to
64 bits for dram 64 bits address DMA support.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
|
|
support 64 bits
ASPEED AST2700 SOC is a 64 bits quad core CPUs (Cortex-a35)
And the base address of dram is "0x4 00000000" which
is 64bits address.
It have "Normal Priority Transmit Ring Base Address Register High(0x17C)",
"High Priority Transmit Ring Base Address Register High(0x184)" and
"Receive Ring Base Address Register High(0x18C)" to save the high part physical
address of descriptor manager.
Ex: TX descriptor manager address [34:0]
The "Normal Priority Transmit Ring Base Address Register High(0x17C)"
bits [2:0] which corresponds the bits [34:32] of the 64 bits address of
the TX ring buffer address.
The "Normal Priority Transmit Ring Base Address Register(0x20)" bits [31:0]
which corresponds the bits [31:0] of the 64 bits address
of the TX ring buffer address.
Introduce a new sub region which size is 0x100 for the set of new registers
and map it at 0x100 in the container region.
This sub region range is from 0x100 to 0x1ff.
Introduce a new property and object attribute to activate the region for new registers.
Introduce a new memop handlers for the new register read and write.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
|
|
Update TX and RX ring base address data type to uint64_t for
64 bits dram address DMA support.
Both "Normal Priority Transmit Ring Base Address Register(0x20)" and
"Receive Ring Base Address Register (0x24)" are used for saving the
low part physical address of descriptor manager.
Therefore, changes to set TX and RX descriptor manager address bits [31:0]
in ftgmac100_read and ftgmac100_write functions.
Incrementing the version of vmstate to 2.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
|
|
According to the datasheet of ASPEED SOCs,
one MAC controller owns 128KB of register space for AST2500.
However, one MAC controller only owns 64KB of register space for AST2600
and AST2700. It set the memory region size 128KB and it occupied another
controllers Address Spaces.
Update one MAC controller memory region size to 0x1000
because AST2500 did not use register spaces over than 64KB.
Introduce a new container region size to 0x1000 and its range
is from 0 to 0xfff. This container is mapped a sub region
for the current set of register.
This sub region range is from 0 to 0xff.
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
|
|
QAPI patches patches for 2024-07-06
# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmaI6xcSHGFybWJydUBy
# ZWRoYXQuY29tAAoJEDhwtADrkYZTTbQP/AonsqGYQyOPCWae9dfDt+Wy+k2gthoB
# dn/3SRjYnA23avEv2/AGAPxgp5MHkpdhh8eqNjWq9QgqgEUh/m0nJztS/MiLMHsR
# /PENPy4V2QFf7s5XtIutLiKXgGbzwtHxrbwnCNyQZW6dAK67VBTq5hPQSxFwBVga
# FDVm+DS2JehJ7IPMVmPT5gjI2cyDYNc/rxbvcbcb5SqirfJdPFk9nMJUrQ0Qubfs
# c9D6l8Cwzbm4JfSeRThs8v9CsDZ1+OIXnpDgGAP9hr7+yYFsovLSHfiLGFxnFXiN
# gSKLBNRIzXnC9cFsKY4jXuqFoSFblRccqCtPSYb7sAp3OVwKq3kA/XNuPIAPii8S
# cm+bhVJ3lyXUW5/6qruS5tOEkpsTnXC45Uw9nvZDEVXANMn3viZ1qInxKak8Nr+p
# k0bOHGE4NzRKkAvGDaTooUOlhG4iy9M+Q4dTcwKIoXTs1Euo8uOjAL+jGwT2pan5
# fb/P1cIqMgMpwSQjwIs7LoYMk20FF44CPtuwA+m85iLbTiiuUfQ4bTnVNMOQMibq
# 3QWIrEDfxwrvwMPsv/u/hcc5d2Tb+5QP9CeVmT9woSXJqU2g4yvKKP9JBf7jUFMC
# fTpNRcHOWsIoz+AgOrUeYe67fLpqUWQii08JhPg5f4ybbEzkzZub0zOKNFLYumG0
# VT3BQlO+8LdW
# =RwDq
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 05 Jul 2024 11:58:31 PM PDT
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
* tag 'pull-qapi-2024-07-06' of https://repo.or.cz/qemu/armbru:
sphinx/qapidoc: Fix to generate doc for explicit, unboxed arguments
qapi/parser: don't parse rST markup as section headers
qapi: add markup to note blocks
qapi: update prose in note blocks
qapi: convert "Note" sections to plain rST
qapi: nail down convention that Errors sections are lists
qapi: fix non-compliant JSON examples
docs/qapidoc: fix nested parsing under untagged sections
qapi/parser: fix comment parsing immediately following a doc block
qapi/parser: preserve indentation in QAPIDoc sections
docs/qapidoc: delint a tiny portion of the module
docs/qapidoc: remove unused intersperse function
qapi: linter fixups
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
SD/MMC patches queue
- Use published card address (RCA) in qtest/npcm7xx_sdhci
- Have cards use random RCA
- Use SD spec v3.01 by default
- Convert GEN_CMD to sd_generic_read/write_byte style
- Extract SDMMC_COMMON abstract QDev parent from SD_CARD
- Few housekeeping
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmaIbbcACgkQ4+MsLN6t
# wN6A2RAAvTqk05r+R8ayyGLtxi6RBLb36WfIZy1iaiS3S5i93KrIwqM3LPqWMRRf
# 1h2dmflec3q3ebY/iHl6bdasdUlqfZDaw8BKBPETbDt9xCVmEC9/n7Vi7EMPmzP6
# A2ci7ZCDup4gLwp8AuB9OcMJnlVLGCQjW5yOTjN0V1MaG15iv6N7d6Th/aLEPEUr
# Ji/kk8adRGJhGRHcbkL7BGK+TxyAOUjjyt0k5e5hSS1W0T4dLgIljxq/L0wOxlZe
# Ot11GO/0EykkMIm7uASYXQws8wJFMgfhTYn77ibbzVFCBtSKvsq6ziuX3WopPoGK
# 0IfMkiK1vRpKey54Yn3+28ZY0v86c3NXybNlLbdrkvcZJgMrFTb4bpWyhQyx4Xbu
# uHfFxfu+rZC8/jfVqHd/RFw5sUliokc9a+KbaG9Yzx5MzXufOnu3iVOpx1vA6ZXX
# lX87qA1tZ78kTn/CtAAPx3CBWE9ojgH7wz/ABBTifUkIfDz5kFYT3g+kfygQQ+xh
# +bvdfQWeJ51Z3tPrUWm5fSGyB//XmgCfww7CZ1d63QaebAwml0YYvR3kivgnZ9A1
# abLr+uN7o4q3bqaY2FUvtglBPttA58wt7n02utWef8ZHl72hCsbvPtfwp2idUMY7
# ZRqdnHOB+opDbH9Xy9tj3Cqq1UPiEv3U3qXhZtd1Us7LSHXC/bk=
# =iKnd
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 05 Jul 2024 03:03:35 PM PDT
# gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE
# gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full]
* tag 'sdmmc-20240706' of https://github.com/philmd/qemu:
hw/sd/sdcard: Extract TYPE_SDMMC_COMMON from TYPE_SD_CARD
hw/sd/sdcard: Introduce set_csd/set_cid handlers
hw/sd/sdcard: Cover more SDCardStates
hw/sd/sdcard: Trace length of data read on DAT lines
hw/sd/sdcard: Remove default case in read/write on DAT lines
hw/sd/sdcard: Remove noise from sd_cmd_name()
hw/sd/sdcard: Remove noise from sd_acmd_name()
hw/sd/sdcard: Remove sd_none enum from sd_cmd_type_t
hw/sd/sdcard: Add sd_cmd_GEN_CMD handler (CMD56)
hw/sd/sdcard: Rename sd_cmd_SEND_OP_COND handler
hw/sd/sdcard: Use spec v3.01 by default
hw/sd/sdcard: Remove leftover comment about removed 'spi' Property
hw/sd/sdcard: Generate random RCA value
tests/qtest/npcm7xx_sdhci: Access the card using its published address
hw/sd/npcm7xx_sdhci: Use TYPE_SYSBUS_SDHCI definition
hw/sd/sdhci: Log non-sequencial access as GUEST_ERROR
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
When a command's arguments are specified as an explicit type T,
generated documentation points to the members of T.
Example:
##
# @announce-self:
#
# Trigger generation of broadcast RARP frames to update network
[...]
##
{ 'command': 'announce-self', 'boxed': true,
'data' : 'AnnounceParameters'}
generates
"announce-self" (Command)
-------------------------
Trigger generation of broadcast RARP frames to update network
[...]
Arguments
~~~~~~~~~
The members of "AnnounceParameters"
Except when the command takes its arguments unboxed , i.e. it doesn't
have 'boxed': true, we generate *nothing*. A few commands have a
reference in their doc comment to compensate, but most don't.
Example:
##
# @blockdev-snapshot-sync:
#
# Takes a synchronous snapshot of a block device.
#
# For the arguments, see the documentation of BlockdevSnapshotSync.
[...]
##
{ 'command': 'blockdev-snapshot-sync',
'data': 'BlockdevSnapshotSync',
'allow-preconfig': true }
generates
"blockdev-snapshot-sync" (Command)
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Takes a synchronous snapshot of a block device.
For the arguments, see the documentation of BlockdevSnapshotSync.
[...]
Same for event data.
Fix qapidoc.py to generate the reference regardless of boxing. Delete
now redundant references in the doc comments.
Fixes: 4078ee5469e5 (docs/sphinx: Add new qapi-doc Sphinx extension)
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240628112756.794237-1-armbru@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
|
|
The double-colon synax is rST formatting that precedes a literal code
block. We do not want to capture these as QAPI-specific sections.
Coerce blocks that start with e.g. "Example::" to be parsed as untagged
paragraphs instead of special tagged sections.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20240626222128.406106-14-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Indentation tweaked for consistency]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Generally, surround command-line options with ``literal`` markup to help
it stand out from prose in rendered HTML, and add cross-references to
replace "see also" messages.
References to types, values, and other QAPI definitions are not yet
adjusted here; they will be converted en masse in a subsequent patch
after the new QAPI doc generator is merged.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240626222128.406106-13-jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Where I've noticed, rephrase the note to read more fluently.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240626222128.406106-12-jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
We do not need a dedicated section for notes. By eliminating a specially
parsed section, these notes can be treated as normal rST paragraphs in
the new QMP reference manual, and can be placed and styled much more
flexibly.
Convert all existing "Note" and "Notes" sections to pure rST. As part of
the conversion, capitalize the first letter of each sentence and add
trailing punctuation where appropriate to ensure notes look sensible and
consistent in rendered HTML documentation. Markup is also re-aligned to
the de-facto standard of 3 spaces for directives.
Update docs/devel/qapi-code-gen.rst to reflect the new paradigm, and
update the QAPI parser to prohibit "Note" sections while suggesting a
new syntax. The exact formatting to use is a matter of taste, but a good
candidate is simply:
.. note:: lorem ipsum ...
... dolor sit amet ...
... consectetur adipiscing elit ...
... but there are other choices, too. The Sphinx readthedocs theme
offers theming for the following forms (capitalization unimportant); all
are adorned with a (!) symbol () in the title bar for rendered HTML
docs.
See
https://sphinx-rtd-theme.readthedocs.io/en/stable/demo/demo.html#admonitions
for examples of each directive/admonition in use.
These are rendered in orange:
.. Attention:: ...
.. Caution:: ...
.. WARNING:: ...
These are rendered in red:
.. DANGER:: ...
.. Error:: ...
These are rendered in green:
.. Hint:: ...
.. Important:: ...
.. Tip:: ...
These are rendered in blue:
.. Note:: ...
.. admonition:: custom title
admonition body text
This patch uses ".. note::" almost everywhere, with just two "caution"
directives. Several instances of "Notes:" have been converted to
merely ".. note::", or multiple ".. note::" where appropriate.
".. admonition:: notes" is used in a few places where we had an
ordered list of multiple notes that would not make sense as
standalone/separate admonitions. Two "Note:" following "Example:"
have been turned into ordinary paragraphs within the example.
NOTE: Because qapidoc.py does not attempt to preserve source ordering of
sections, the conversion of Notes from a "tagged section" to an
"untagged section" means that rendering order for some notes *may
change* as a result of this patch. The forthcoming qapidoc.py rewrite
strictly preserves source ordering in the rendered documentation, so
this issue will be rectified in the new generator.
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Stefan Hajnoczi <stefanha@redhat.com> [for block*.json]
Message-ID: <20240626222128.406106-11-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message clarified slightly, period added to one more note]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
By unstated convention, Errors sections are rST lists. Document the
convention, and make the one exception conform.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240626222128.406106-10-jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
The new QMP documentation generator wants to parse all examples as
"QMP". We have an existing QMP lexer in docs/sphinx/qmp_lexer.py (Seen
in-use here: https://qemu-project.gitlab.io/qemu/interop/bitmaps.html)
that allows the use of "->", "<-" and "..." tokens to denote QMP
protocol flow with elisions, but otherwise defers to the JSON lexer.
To utilize this lexer for the existing QAPI documentation, we need them
to conform to a standard so that they lex and render correctly. Once the
QMP lexer is active for examples, errant QMP/JSON will produce warning
messages and fail the build.
Fix any invalid JSON found in QAPI documentation (identified by
attempting to lex all examples as QMP; see subsequent
commits). Additionally, elisions must be standardized for the QMP lexer;
they must be represented as the value "...", so three examples have been
adjusted to support that format here.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240626222128.406106-9-jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Sphinx does not like sections without titles, because it wants to
convert every section into a reference. When there is no title, it
struggles to do this and transforms the tree inproperly.
Depending on the rST used, this may result in an assertion error deep in
the docutils HTMLWriter.
(Observed when using ".. admonition:: Notes" under such a section - When
this is transformed with its own <title> element, Sphinx is fooled into
believing this title belongs to the section and incorrect mutates the
docutils tree, leading to errors during rendering time.)
When parsing an untagged section (free paragraphs), skip making a hollow
section and instead append the parse results to the prior section.
Many Bothans died to bring us this information.
The resulting output changes are basically invisible.
Signed-off-by: John Snow <jsnow@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240626222128.406106-8-jsnow@redhat.com>
[Mention output changes in commit message]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
If a comment immediately follows a doc block, the parser doesn't ignore
that token appropriately. Fix that.
e.g.
> ##
> # = Hello World!
> ##
>
> # I'm a comment!
will break the parser, because it does not properly ignore the comment
token if it immediately follows a doc block.
Fixes: 3d035cd2cca6 (qapi: Rewrite doc comment parser)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240626222128.406106-7-jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Change get_doc_indented() to preserve indentation on all subsequent text
lines, and create a compatibility dedent() function for qapidoc.py that
removes indentation the same way get_doc_indented() did.
This is being done for the benefit of a new qapidoc generator which
requires that indentation in argument and features sections are
preserved.
Prior to this patch, a section like this:
```
@name: lorem ipsum
dolor sit amet
consectetur adipiscing elit
```
would have its body text be parsed into:
```
lorem ipsum
dolor sit amet
consectetur adipiscing elit
```
We want to preserve the indentation for even the first body line so that
the entire block can be parsed directly as rST. This patch would now
parse that segment into:
```
lorem ipsum
dolor sit amet
consectetur adipiscing elit
```
This is helpful for formatting arguments and features as field lists in
rST, where the new generator will format this information as:
```
:arg type name: lorem ipsum
dolor sit amet
consectetur apidiscing elit
```
...and can be formed by the simple concatenation of the field list
construct and the body text. The indents help preserve the continuation
of a block-level element, and further allow the use of additional rST
block-level constructs such as code blocks, lists, and other such
markup.
This understandably breaks the existing qapidoc.py; so a new function is
added there to dedent the text for compatibility. Once the new generator
is merged, this function will not be needed any longer and can be
dropped.
I verified this patch changes absolutely nothing by comparing the
md5sums of the QMP ref html pages both before and after the change, so
it's certified inert. QAPI test output has been updated to reflect the
new strategy of preserving indents for rST.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240626222128.406106-6-jsnow@redhat.com>
[Lost commit message paragraph restored]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
In a forthcoming series that adds a new QMP documentation generator, it
will be helpful to have a linting baseline. However, there's no need to
shuffle around the deck chairs too much, because most of this code will
be removed once that new qapidoc generator (the "transmogrifier") is in
place.
To ease my pain: just turn off the black auto-formatter for most, but
not all, of qapidoc.py. This will help ensure that *new* code follows a
coding standard without bothering too much with cleaning up the existing
code.
Code that I intend to keep is still subject to the delinting beam.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240626222128.406106-5-jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
This function has been unused since since commit
fd62bff901b (sphinx/qapidoc: Drop code to generate doc for simple
union tag).
Signed-off-by: John Snow <jsnow@redhat.com>
Message-ID: <20240626222128.406106-4-jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message tweaked]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Fix minor irritants to pylint/flake8 et al.
(Yes, these need to be guarded by the Python tests. That's a work in
progress, a series that's quite likely to follow once I finish this
Sphinx project. Please pardon the temporary irritation.)
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240626222128.406106-3-jsnow@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
In order to keep eMMC model simpler to maintain,
extract common properties and the common code from
class_init to the (internal) TYPE_SDMMC_COMMON.
Update the corresponding QOM cast macros.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240703134356.85972-6-philmd@linaro.org>
|
|
In preparation of introducing eMMC support which have
different CSD/CID structures, introduce a pair of handlers
in SDCardClass.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-82-philmd@linaro.org>
|
|
So far eMMC will only use sd_sleep_state, but
all all states specified for completeness.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-81-philmd@linaro.org>
|
|
Some commands expect less than BLOCK_LENGTH.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-80-philmd@linaro.org>
|
|
All read/write on DAT lines are explicitly handled.
Reaching this point would be a programming error:
replace by an assertion.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-79-philmd@linaro.org>
|
|
These CMD names weren't really useful, "UNKNOWN_CMD" is simpler.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-78-philmd@linaro.org>
|
|
These ACMD names weren't really useful, "UNKNOWN_ACMD" is simpler.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-77-philmd@linaro.org>
|
|
All handlers using the 'sd_none' enum got converted,
remove it.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240628070216.92609-76-philmd@linaro.org>
|
|
"General command" (GEN_CMD, CMD56) is described as:
GEN_CMD is the same as the single block read or write
commands (CMD24 or CMD17). The difference is that [...]
the data block is not a memory payload data but has a
vendor specific format and meaning.
Thus this block must not be stored overwriting data block
on underlying storage drive. Handle as RAZ/WI.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240703134356.85972-3-philmd@linaro.org>
|
|
The correct command name is 'SD SEND_OP_COND',
rename accordingly.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Tested-by: Cédric Le Goater <clg@redhat.com>
Message-Id: <20240703134356.85972-4-philmd@linaro.org>
|
