aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-02-15sparc/leon3: Initialize stack pointerSebastian Huber
A lot of real world LEON3 systems are shipped with the GRMON boot loader. This boot loader initializes the stack pointer with the end of RAM address. The application can use this to detect the RAM size of a particular board variant. Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de> Reviewed-by: Fabien Chouteau <chouteau@adacore.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-02-15misc: Fix case Qemu -> QEMUStefan Weil
Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2014-02-14PPC: KVM: Add missing address space to ldl_phys helperAlexander Graf
We now have to pass an address space to our _phys helpers. During the transition apparently the EPR exit path missed out, so let's put it there. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-13Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
acpi,pc,pci fixes and enhancements Most changes here are hotplug related: This merges hotplug infrastructure changes by Igor, some acpi related fixes, and PC fixes. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Mon 10 Feb 2014 09:13:26 GMT using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: ACPI: Remove commented-out code from HPET._CRS hw/pci: switch to a generic hotplug handling for PCIDevice pci/pcie: convert PCIE hotplug to use hotplug-handler API pci/shpc: convert SHPC hotplug to use hotplug-handler API acpi/piix4pm: convert ACPI PCI hotplug to use hotplug-handler API qdev:pci: refactor PCIDevice to use generic "hotpluggable" property hw/acpi: move typeinfo to the file end qdev: add "hotpluggable" property to Device qdev: add to BusState "hotplug-handler" link define hotplug interface loader: document that errno is set pc.c: better error message on initrd sizing failure pc_piix: enable legacy hotplug for Xen qtest: don't report signals if qtest driver enabled hw:piix4:acpi: reuse pcihp code for legacy PCI hotplug pcihp: remove unused AcpiPciHpPciStatus.device_present field pcihp: make pci_read() mmio calback compatible with legacy ACPI hotplug pcihp: make PCI hotplug mmio handlers indifferent to PCI_HOTPLUG_ADDR pcihp: replace enable|disable_device() with oneliners pcihp: reduce number of device check events Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-13Merge remote-tracking branch 'remotes/afaerber/tags/prep-for-upstream' into ↵Peter Maydell
staging PReP machine and devices * Cleanups for Raven PCI host bridge * Removal of PReP machine and devices from qemu-system-ppcemb # gpg: Signature made Mon 10 Feb 2014 16:19:03 GMT using RSA key ID 3E7E013F # gpg: Good signature from "Andreas Färber <afaerber@suse.de>" # gpg: aka "Andreas Färber <afaerber@suse.com>" * remotes/afaerber/tags/prep-for-upstream: prep: Drop from ppcemb-softmmu raven: Use constant PCI_NUM_PINS instead of 4 prep: Kill get_system_io() usage Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-12Merge remote-tracking branch 'remotes/alon/pull-libcacard.glusterfs' into ↵Peter Maydell
staging * remotes/alon/pull-libcacard.glusterfs: libcacard: Don't link with all libraries QEMU links to Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-12Merge remote-tracking branch 'remotes/kevin/tags/for-anthony' into stagingPeter Maydell
Block patches # gpg: Signature made Sun 09 Feb 2014 08:12:51 GMT using RSA key ID C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" * remotes/kevin/tags/for-anthony: block: Fix 32 bit truncation in mark_request_serialising() blkdebug: Don't leak bs->file on failure block: Don't call ROUND_UP with negative values block: bdrv_aligned_pwritev: Assert overlap range block: Fix memory leaks in bdrv_co_do_pwritev() raw: Fix BlockLimits passthrough qemu-iotests: add test for qcow2 preallocation with different cluster sizes qcow2: check for NULL l2meta qcow2: fix offset overflow in qcow2_alloc_clusters_at() qcow2: remove n_start and n_end of qcow2_alloc_cluster_offset() block/iscsi: always fill bs->bl.opt_transfer_length block: Fail gracefully with missing filename qemu-iotests: enable support for NFS protocol qemu-iotests: enable test 016 and 025 to work with NFS protocol qemu-iotests: blacklist test 020 for NFS protocol qemu-iotests: change _supported_proto to file for various tests block: add native support for NFS qemu-iotest: Make 077 raw-only Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-11petalogix-ml605: Create the CPU with object_new()Edgar E. Iglesias
This is to allow future patches to set properties before cpu::realize(). Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-11exec: Make cpu_memory_rw_debug use the CPUs ASEdgar E. Iglesias
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-11exec: Make cpu_physical_memory_write_rom input an ASEdgar E. Iglesias
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-11exec: Make stb_phys input an AddressSpaceEdgar E. Iglesias
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-11exec: Make stw_*_phys input an AddressSpaceEdgar E. Iglesias
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-11exec: Make stl_phys_notdirty input an AddressSpaceEdgar E. Iglesias
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-11exec: Make stl_*_phys input an AddressSpaceEdgar E. Iglesias
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-11exec: Make stq_*_phys input an AddressSpaceEdgar E. Iglesias
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-11exec: Make lduw_*_phys input an AddressSpaceEdgar E. Iglesias
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-11exec: Make ldq/ldub_*_phys input an AddressSpaceEdgar E. Iglesias
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-11exec: Make ldl_*_phys input an AddressSpaceEdgar E. Iglesias
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-11exec: On AS changes, only flush affected CPU TLBsEdgar E. Iglesias
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-11cpu: Add per-cpu address spaceEdgar E. Iglesias
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-11memory: Add MemoryListener to typedefs.hEdgar E. Iglesias
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-11exec: Make memory_region_section_get_iotlb use section ASEdgar E. Iglesias
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-11exec: Always initialize MemorySection address spacesEdgar E. Iglesias
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-11exec: Make iotlb_to_region input an ASEdgar E. Iglesias
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-11exec: Make tb_invalidate_phys_addr input an ASEdgar E. Iglesias
No functional change. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
2014-02-11Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20140208' into staging target-arm queue: * more A64 Neon instructions * AArch32 VCVTB and VCVTT ARMv8 instructions * fixes to inaccuracies in GIC emulation * libvixl disassembler for A64 * Allwinner SoC ethernet controller * zynq software system reset support # gpg: Signature made Sat 08 Feb 2014 15:53:05 GMT using RSA key ID 14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" * remotes/pmaydell/tags/pull-target-arm-20140208: (29 commits) arm/zynq: Add software system reset via SCLR hw/arm/allwinner-a10: initialize EMAC hw/net: add support for Allwinner EMAC Fast Ethernet controller util/fifo8: clear fifo head upon reset util/fifo8: implement push/pop of multiple bytes disas: Implement disassembly output for A64 disas/libvixl: Fix upstream libvixl compilation issues disas: Add subset of libvixl sources for A64 disassembler rules.mak: Link with C++ if we have a C++ compiler rules.mak: Support .cc as a C++ source file suffix arm_gic: Add GICC_APRn state to the GICState vmstate: Add uint32 2D-array support arm_gic: Support setting/getting binary point reg arm_gic: Keep track of SGI sources arm_gic: Fix GIC pending behavior target-arm: Add support for AArch32 64bit VCVTB and VCVTT target-arm: A64: Add FNEG and FABS to the SIMD 2-reg-misc group target-arm: A64: Add 2-reg-misc REV* instructions target-arm: A64: Add narrowing 2-reg-misc instructions target-arm: A64: Implement 2-reg-misc CNT, NOT and RBIT ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-10Merge remote-tracking branch 'remotes/kvaneesh/for-upstream' into stagingPeter Maydell
* remotes/kvaneesh/for-upstream: hw/9pfs: fix P9_STATS_GEN handling hw/9pfs: make get_st_gen() return ENOTTY error on special files hw/9pfs: handle undefined FS_IOC_GETVERSION case in handle_ioc_getversion() hw/9pfs: fix error handing in local_ioc_getversion() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-10memory: fix limiting of translation at a page boundaryPaolo Bonzini
Commit 360e607 (address_space_translate: do not cross page boundaries, 2014-01-30) broke MMIO accesses in cases where the section is shorter than the full register width. This can happen for example with the Bochs DISPI registers, which are 16 bits wide but have only a 1-byte long MemoryRegion (if you write to the "second byte" of the register your access is discarded; it doesn't write only to half of the register). Restrict the action of commit 360e607 to direct RAM accesses. This is enough for Xen, since MMIO will not go through the mapcache. Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2014-02-10prep: Drop from ppcemb-softmmuAndreas Färber
ppcemb covers only embedded processors, which does not include PReP. Signed-off-by: Andreas Färber <andreas.faerber@web.de>
2014-02-10ACPI: Remove commented-out code from HPET._CRSGabriel L. Somlo
IRQNoFlags on HPET._CRS crashes WinXP because it causes the HPET to conflict with the system timer and/or the RTC. It only occurs on Apple hardware, and even there it is exposed fully only when OS X is detected (via _OSI). Recent OS X versions work on QEMU without this statement, so at this time there is no need to find a better way to conditionally include the statement. This patch removes the commented out (and wrong, should have been {0, 8}) statement from HPET._CRS. Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-By: Igor Mammedov <imammedo@redhat.com>
2014-02-10hw/pci: switch to a generic hotplug handling for PCIDeviceIgor Mammedov
make qdev_unplug()/device_set_realized() to call hotplug handler's plug/unplug methods if available and remove not needed anymore hot(un)plug handling from PCIDevice. In case if hotplug handler is not available, revert to the legacy hotplug method for compatibility with not yet converted buses. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-10pci/pcie: convert PCIE hotplug to use hotplug-handler APIIgor Mammedov
Split pcie_cap_slot_hotplug() into hotplug/unplug callbacks and register them as "hotplug-handler" interface implementation of PCIE_SLOT device. Replace pci_bus_hotplug() wiring with setting link on PCI BUS "hotplug-handler" property to PCI_BRIDGE_DEV device. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-10pci/shpc: convert SHPC hotplug to use hotplug-handler APIIgor Mammedov
Split shpc_device_hotplug() into hotplug/unplug callbacks and register them as "hotplug-handler" interface implementation of PCI_BRIDGE_DEV device. Replace pci_bus_hotplug() wiring with setting link on PCI BUS "hotplug-handler" property to PCI_BRIDGE_DEV device. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-10acpi/piix4pm: convert ACPI PCI hotplug to use hotplug-handler APIIgor Mammedov
Split piix4_device_hotplug() into hotplug/unplug callbacks and register them as "hotplug-handler" interface implementation of PIIX4_PM device. Replace pci_bus_hotplug() wiring with setting link on PCI BUS "hotplug-handler" property to PIIX4_PM device. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-10qdev:pci: refactor PCIDevice to use generic "hotpluggable" propertyIgor Mammedov
Get rid of PCIDevice specific PCIDeviceClass.no_hotplug and use generic DeviceClass.hotpluggable field instead. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-10hw/acpi: move typeinfo to the file endIgor Mammedov
do so to avoid not necessary forward declarations and place typeinfo registration at the file end where it's usually expected. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-10qdev: add "hotpluggable" property to DeviceIgor Mammedov
Currently it's possible to make PCIDevice not hotpluggable by using no_hotplug field of PCIDeviceClass. However it limits this only to PCI devices and prevents from generalizing hotplug code. So add similar field to DeviceClass so it could be reused with other Devices and would allow to replace PCI specific hotplug callbacks with generic implementation. Following patches will replace PCIDeviceClass.no_hotplug with this new property. In addition expose field as "hotpluggable" readonly property, to make it possible to read its value via QOM interface. Make DeviceClass hotpluggable by default as it was assumed before. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-10qdev: add to BusState "hotplug-handler" linkIgor Mammedov
It will allow to reuse field with different BUSes, reducing code duplication. Field is intended for replacing 'hotplug_qdev' field in PCIBus and also will allow to avoid adding equivalent field to DimmBus with possiblitity to refactor other BUSes to use it instead of custom field. In addition once all users of allow_hotplug field are converted to new API, link could replace allow_hotplug field in qdev hotplug code. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-10define hotplug interfaceIgor Mammedov
Provide a generic hotplug interface for hotplug handlers. Intended for replacing hotplug mechanism used by PCI/PCIE/SHPC code and will be used for memory hotplug. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-10loader: document that errno is setMichael S. Tsirkin
Document that get_image_size sets errno on failure. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-02-09raven: Use constant PCI_NUM_PINS instead of 4Hervé Poussineau
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Andreas Färber <andreas.faerber@web.de>
2014-02-09prep: Kill get_system_io() usageHervé Poussineau
While ISA address space in prep machine is currently the one returned by get_system_io(), this depends of the implementation of i82378/raven devices, and this may not be the case forever. Use the right ISA address space when adding some more ports to it. We can use whatever ISA device on the right ISA bus, as all ISA devices on the same ISA bus share the same ISA address space. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Andreas Färber <andreas.faerber@web.de>
2014-02-09libcacard: Don't link with all libraries QEMU links toChristophe Fergeau
As described in https://bugzilla.redhat.com/show_bug.cgi?id=987441 , libcacard currently links to all the libraries QEMU is linking to, including glusterfs libraries, libiscsi, ... libcacard does not need all of these. This patch ensures it's only linked with the libraries it needs. Signed-off-by: Christophe Fergeau <cfergeau@redhat.com> Signed-off-by: Alon Levy <alevy@redhat.com>
2014-02-09block: Fix 32 bit truncation in mark_request_serialising()Kevin Wolf
On 32 bit hosts, size_t is too small for align as the bitmask ~(align - 1) will zero out the higher 32 bits of the offset. While at it, change the local overlap_bytes variable to unsigned to match the field in BdrvTrackedRequest. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2014-02-09blkdebug: Don't leak bs->file on failureKevin Wolf
Reported-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2014-02-09block: Don't call ROUND_UP with negative valuesKevin Wolf
The behaviour of the ROUND_UP macro with negative numbers isn't obvious. It happens to do the right thing in this please, but better avoid it. Suggested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2014-02-09block: bdrv_aligned_pwritev: Assert overlap rangeKevin Wolf
This adds assertions that the request that we actually end up passing to the block driver (which includes RMW data and has therefore potentially been rounded to alignment boundaries) is fully covered by the overlap_{offset,size} fields of the associated BdrvTrackedRequest. Suggested-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2014-02-09block: Fix memory leaks in bdrv_co_do_pwritev()Kevin Wolf
The error path for a failure in one of the two bdrv_aligned_preadv() calls leaked head_buf or tail_buf, respectively. This fixes the memory leak. Reported-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2014-02-09raw: Fix BlockLimits passthroughKevin Wolf
raw copies over the BlockLimits of bs->file during bdrv_open(). However, since commit d34682cd it is immediately overwritten during bdrv_refresh_limits(). This caused all fields except for opt_transfer_length and opt_mem_alignment (which happen to be correctly inherited in generic code) to be zeroed. Move the BlockLimit assignment to a .bdrv_refresh_limits() callback to make it work again for all fields. Reported-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com>
2014-02-09qemu-iotests: add test for qcow2 preallocation with different cluster sizesHu Tao
Reviewed-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Hu Tao <hutao@cn.fujitsu.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-28 01:15:01 +0000