aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-10-20migration: Export a function that tells if the migration has finished correctlyJuan Quintela
This will allow us to hide the state values. Signed-off-by: Juan Quintela <quintela@redhat.com>
2011-10-20migration: Pass MigrationState in migration notifiersJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com>
2011-10-20migration: Use bandwidth_limit directlyJuan Quintela
Now that current_migration always exist, there is no reason for max_throotle variable. Signed-off-by: Juan Quintela <quintela@redhat.com>
2011-10-20migration: create accessor for current_migrationJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com>
2011-10-20migration: Move exported functions to the end of the fileJuan Quintela
This means we can remove the two forward declarations. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-20migration: Remove migration cancel() callbackJuan Quintela
It is used only in one place Signed-off-by: Juan Quintela <quintela@redhat.com>
2011-10-20migration: Remove get_status() accessorJuan Quintela
It is only used inside migration.c, and fields on that struct are accessed all around the place on that file. Signed-off-by: Juan Quintela <quintela@redhat.com>
2011-10-20migration: Our release callback was just freeJuan Quintela
We called it from a single place, and always with state != MIG_STATE_ACTIVE. Just remove the whole callback. For users of the notifier, notice that this is exactly the case where they don't care, we are just freeing the state from previous failed migration (it can't be a sucessful one, otherwise we would not be running on that machine in the first place). Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-20migration: Introduce migrate_fd_completed() for consistencyJuan Quintela
This function is a bit different of the others that change the state, in the sense that if migrate_fd_cleanup() returns an error, it set the status to error, not completed. Signed-off-by: Juan Quintela <quintela@redhat.com>
2011-10-20migration: Refactor and simplify error checking in migrate_fd_put_readyJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-20migration: Introduce MIG_STATE_SETUPJuan Quintela
Use MIG_STATE_ACTIVE only when migration has really started. Use this new state to setup migration parameters. Change defines for an anonymous struct. Signed-off-by: Juan Quintela <quintela@redhat.com>
2011-10-20migration: move migrate_new to do_migrateJuan Quintela
Once there, remove all parameters that don't need to be passed to *start_outgoing_migration() functions Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-20migration: Make all posible migration functions staticJuan Quintela
I have to move two functions postions to avoid forward declarations Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-20migration: Refactor MigrationState creationJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-20migration: Rename FdMigrationState MigrationStateJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-20migration: Fold MigrationState into FdMigrationStateJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-20migration: Use FdMigrationState instead of MigrationState when possibleJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-20migration: Make *start_outgoing_migration return FdMigrationStateJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-20migration: make *save_live return errorsJuan Quintela
Make *save_live() return negative values when there is one error, and updates all callers to check for the error. Signed-off-by: Juan Quintela <quintela@redhat.com>
2011-10-20migration: use qemu_file_get_error() return value when possibleJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com>
2011-10-20savevm: Rename has_error to last_error fieldJuan Quintela
Now the field contains the last error name, so rename acordingly. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-20migration: rename qemu_file_has_error to qemu_file_get_errorJuan Quintela
Now the function returned errno, so it is better the new name. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-20migration: return real error codeJuan Quintela
make functions propagate errno, instead of just using -EIO. Add a comment about what are the return value of qemu_savevm_state_iterate(). Signed-off-by: Juan Quintela <quintela@redhat.com>
2011-10-20migration: change has_error to contain errno valuesJuan Quintela
We normally already have an errno value. When not, abuse EIO. Signed-off-by: Juan Quintela <quintela@redhat.com>
2011-10-20migration: set error if select return one errorJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-20migration: don't "write" when migration is not activeJuan Quintela
If migration is not active, just ignore writes. Signed-off-by: Juan Quintela <quintela@redhat.com>
2011-10-20buffered_file: reuse QEMUFile has_error fieldJuan Quintela
Instead of having two has_error fields in QEMUFile & QEMUBufferedFile, reuse the 1st one. Notice that the one in buffered_file is only set after a file operation. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-20buffered_file: Use right "opaque"Juan Quintela
buffered_close 's' variable is of type QEMUFileBuffered, and wait_for_unfreeze() expect to receive a MigrationState, that 'coincidentaly' is s->opaque. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-20migration: If there is one error, it makes no sense to continueJuan Quintela
Once there, add a comment about what each error mean. Signed-off-by: Juan Quintela <quintela@redhat.com>
2011-10-20migration: add error handling to migrate_fd_put_notify().Yoshiaki Tamura
Although migrate_fd_put_buffer() sets MIG_STATE_ERROR if it failed, since migrate_fd_put_notify() isn't checking error of underlying QEMUFile, those resources are kept open. This patch checks it and calls migrate_fd_error() in case of error. Signed-off-by: Yoshiaki Tamura <tamura.yoshiaki@lab.ntt.co.jp> Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-20migration: Check that migration is active before cancel itJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-20migration: simplify state assignmenteJuan Quintela
Once there, make sure that if we already know that there is one error, just call migration_fd_cleanup() with the ERROR state. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-20ds1225y: Use stdio instead of QEMUFileJuan Quintela
QEMUFile * is only intended for migration nowadays. Using it for anything else just adds pain and a layer of buffers for no good reason. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-20Revert "savevm: fix corruption in vmstate_subsection_load()."Juan Quintela
This reverts commit eb60260de0b050a5e8ab725e84d377d0b44c43ae. Conflicts: savevm.c We changed qemu_peek_byte() prototype, just fixed the rejects. Signed-off-by: Juan Quintela<quintela@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-20savevm: improve subsections detection on loadJuan Quintela
We add qemu_peek_buffer, that is identical to qemu_get_buffer, just that it don't update f->buf_index. We add a paramenter to qemu_peek_byte() to be able to peek more than one byte. Once this is done, to see if we have a subsection we look: - 1st byte is QEMU_VM_SUBSECTION - 2nd byte is a length, and is bigger than section name - 3rd element is a string that starts with section_name So, we shouldn't have false positives (yes, content could still get us wrong but probabilities are really low). v2: - Alex Williamsom found that we could get negative values on index. - Rework code to fix that part. - Rewrite qemu_get_buffer() using qemu_peek_buffer() v3: - return "done" on error case v4: - fix qemu_file_skip() off by one. Signed-off-by: Juan Quintela <quintela@redhat.com>
2011-10-20savevm: define qemu_get_byte() using qemu_peek_byte()Juan Quintela
Signed-off-by: Juan Quintela<quintela@redhat.com>
2011-10-20savevm: some coding style cleanupsJuan Quintela
This patch will make moving code on next patches and having checkpatch happy easier. Signed-off-by: Juan Quintela<quintela@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-20savevm: teach qemu_fill_buffer to do partial refillsJuan Quintela
We will need on next patch to be able to lookahead on next patch v2: rename "used" to "pending" (Alex Williams) Signed-off-by: Juan Quintela<quintela@redhat.com> Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
2011-10-16i8259: Move to hw libraryJan Kiszka
No target-specific bits remaining, let's move it over. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-16monitor: Restrict pic/irq_info to supporting targetsJan Kiszka
This allows to drop various stubs and move the i8359 into hwlib. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-16i8259: Fix coding styleJan Kiszka
No functional changes. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-16i8259: Convert to qdevJan Kiszka
This key cleanup step requires to move the IRQ debugging bit from i8259_set_irq directly to the per-PIC pic_set_irq, to pass the PIC parameters (I/O base, ELCR address and mask, master/slave mode) as qdev properties, and to interconnect the PICs with their environment via GPIO pins. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-16qdev: Add HEX8 propertyJan Kiszka
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-16i8259: Eliminate PicState2Jan Kiszka
Introduce a reference to the slave PIC for the few cases we need to access it without a proper pointer at hand and drop PicState2. We could even live without slave_pic if we had a better way of modeling the cascade bus the PICs are attached to (in addition to the ISA bus). Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-16i8259: Replace PicState::pics_state with master flagJan Kiszka
This reflects how real PICs indentify their role (in non-buffered mode): Pass the state of the /SP input on pic_init and use it instead of pics_state to differentiate between master and slave mode. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-16i8259: PREP: Replace pic_intack_read with pic_read_irqJan Kiszka
There is nothing in the i8259 spec that justifies the special pic_intack_read. At least the Linux PREP kernels configure the PICs properly so that pic_read_irq returns identical values, and setting read_reg_select in PIC0 cannot be derived from any special i8259 mode. So switch ppc_prep to pic_read_irq and drop the now unused PIC code. CC: Andreas Färber <andreas.faerber@web.de> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-16i8259: Clean up pic_ioport_readJan Kiszka
Drop redundant local address variable. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-16i8259: Fix poll commandJan Kiszka
This was probably never used so far: According to the spec, polling means ack'ing the pending IRQ and setting its corresponding bit in isr. Moreover, we have to signal a pending IRQ via bit 7 of the returned value, and we must not return a spurious IRQ if none is pending. This implements the poll command without the help of pic_poll_read which is left untouched as pic_intack_read is still using it. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-16i8259: Switch to per-PIC IRQ updateJan Kiszka
This converts pic_update_irq to work against a single PIC instead of the complete cascade. Along this change, the required update after pic_set_irq1 is now moved into that function. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-10-16i8259: Clear ELCR on resetJan Kiszka
The ELCR is actually part of the chipset but we model it here for simplicity reasons. The PIIX3 clears the ELCR on reset, which was once broken by 4dbe19e181. Fix this by splitting up pic_init_reset from pic_reset and clearing the register in the latter. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-04 20:46:54 +0000