aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-07-01net: delete QemuOpts when net_client_init() fails.Yoshiaki Tamura
This fixes the following scenario using QMP. First, put a bogus argument "foo" to "type", which results in an error. {"execute": "netdev_add", "arguments": { "type": "foo", "id": "netdev1" } } Then, call it again with correct argument "user". {"execute": "netdev_add", "arguments": { "type": "user", "id": "netdev1" } } This results in "DuplicatedId" error. Because the first command was invalid, it should be able to reuse the same "id", and the second command should work. Reported-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Yoshiaki Tamura <tamura.yoshiaki@lab.ntt.co.jp> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-07-01QMP: Fix python helper /wrt long return stringsJan Kiszka
Remove the arbitrary limitation of 1024 characters per return string and read complete lines instead. Required for device_show. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-07-01QMP: Teach basic capability negotiation to python exampleJan Kiszka
As sending "qmp_capabilities" on session start became mandatory, both python examples were broken. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-07-01monitor: Establish cmd flags and convert the async tagJan Kiszka
As we want to add more flags to monitor commands, convert the only so far existing one accordingly. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-07-01monitor: Fix command completion vs. boolean switchesJan Kiszka
We now have to move forward to the next argument type via next_arg_type. This patch fixes completion for 'eject' and maybe also other commands. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-07-01monitor: Fix leakage during completion processingJan Kiszka
Given too many arguments or an invalid command, we were leaking the duplicated argument strings. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
2010-06-30qdev-properties: Fix (u)intXX parsersKevin Wolf
scanf calls must not use PRI constants, they have probably the wrong size and corrupt memory. We could replace them by SCN ones, but strtol is simpler than scanf here anyway. While at it, also fix the parsers to reject garbage after the number ("4096xyz" was accepted before). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Richard Henderson <rth@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30Return usb device to host on exitShahar Havivi
Signed-off-by: Shahar Havivi <shaharh@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30Return usb device to host on usb_del commandShahar Havivi
Signed-off-by: Shahar Havivi <shaharh@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30net: Fix VM start with '-net none'Amit Shah
Commit 50e32ea8f31035877decc10f1075aa0e619e09cb changed the behaviour for the return type of net_client_init() when a nic type with no init method was specified. 'none' is one such nic type. Instead of returning 0, which gets interpreted as an index into the nd_table[] array, we switched to returning -1, which signifies an error as well. That broke VM start with '-net none'. Testing was only done with the monitor command 'pci_add', which doesn't fail. The correct fix would still be to return 0+ values from net_client_init() only when the return value can be used as an index to refer to an entry in nd_table[]. With the current code, callers can erroneously poke into nd_table[0] when -net nic is used, which can lead to badness. However, this commit just returns to the previous behaviour before the offending commit. Signed-off-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30x86: svm: Always clear event_inj on vmexitJan Kiszka
We currently only clear SVM_EVTINJ_VALID after successful interrupt delivery. This apparently does not match real hardware which clears the whole event_inj field on every vmexit, including unsuccessful interrupt delivery. Reported-by: Erik van der Kouwe <vdkouwe@cs.vu.nl> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30usb-uhci: fix commit 8e65b7c04965c8355e4ce43211582b6b83054e3d for vmstateTeLeMan
The commit 8e65b7c04965c8355e4ce43211582b6b83054e3d introduced expire_time of UHCIState. But expire_time is not in vmstate, the second uhci_frame_timer will not be fired immediately after loadvm. Signed-off-by: TeLeMan <geleman@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30hw/omap : make local function static and remove declaration from headercmchao
Signed-off-by: cmchao <cmchao@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30hw/omap1.c : separate uart modulecmchao
Signed-off-by: cmchao <cmchao@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30hw/omwp2.c : separate l4 interconnect modulecmchao
Signed-off-by: cmchao <cmchao@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30hw/omap2.c : separate tap module(Test-Chip-level)cmchao
Signed-off-by: cmchao <cmchao@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30hw/omap2.c : separate spi modulecmchao
Signed-off-by: cmchao <cmchao@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30hw/omap1.c : separate interrupt controller modulecmchao
Signed-off-by: cmchao <cmchao@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30hw/omap2.c : separate sdrc (sdram controller)cmchao
Signed-off-by: cmchao <cmchao@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30hw/omap2.c : separate gpmc(general purpose memory controller)cmchao
Signed-off-by: cmchao <cmchao@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30hw/omap2.c : separate synctimer modulecmchao
Signed-off-by: cmchao <cmchao@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30hw/omap2.c : separate gptimer modulecmchao
Signed-off-by: cmchao <cmchao@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30hw/omap2.c : separate gpio modulecmchao
Signed-off-by: cmchao <cmchao@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30hw/omap1.c : separate gpio modulecmchao
Signed-off-by: cmchao <cmchao@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30virtio-serial: Simplify virtio_serial_load()Markus Armbruster
For all i, ports_map[i] is used in and only in the i-th iteration. Replace the dynamic array by a scalar variable. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30usb-serial: Fail instead of crash when chardev is missingMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30A bit optimization for tlb_set_page()Jun Koi
This patch avoids handling write watchpoints on read-only memory access. It also breaks the searching loop for watchpoint once the setup for handling watchpoint later is done. Signed-off-by: Jun Koi <junkoi2004@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30target-mips: fix DINSU instructionAurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-30MIPS: fix fulong bios loadingAurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-29target-mips: enable movn/movz on loongson 2E & 2FAurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-29mips-dis: add support for Godson integer instructionsAurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-29r2d: fix pflash mappingAurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-29lsi53c895a: fix Phase Mismatch JumpPaolo Bonzini
lsi_bad_phase has a bug in the choice of pmjad1/pmjad2. This does not matter with Linux guests because it uses just one routine for both, but it breaks Windows 64-bit guests. This is the text from the spec: "[The PMJCTL] bit controls which decision mechanism is used when jumping on phase mismatch. When this bit is cleared the LSI53C895A will use Phase Mismatch Jump Address 1 (PMJAD1) when the WSR bit is cleared and Phase Mismatch Jump Address 2 (PMJAD2) when the WSR bit is set. When this bit is set the LSI53C895A will use jump address one (PMJAD1) on data out (data out, command, message out) transfers and jump address two (PMJAD2) on data in (data in, status, message in) transfers." Which means: CCNTL0.PMJCTL 0 SCNTL2.WSR = 0 PMJAD1 0 SCNTL2.WSR = 1 PMJAD2 1 out PMJAD1 1 in PMJAD2 In qemu, what you get instead is: CCNTL0.PMJCTL 0 out PMJAD1 0 in PMJAD2 <<<<< 1 out PMJAD1 1 in PMJAD1 <<<<< Considering that qemu always has SCNTL2.WSR cleared, the two marked cases (corresponding to phase mismatch on input) are always jumping to the wrong PMJAD register. The patch implements the correct semantics. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-29MIPS: Initial support of fulong mini pc (machine construction)Huacai Chen
Signed-off-by: Huacai Chen <zltjiangshi@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-29MIPS: Initial support of fulong mini pc (CPU definition)Huacai Chen
Signed-off-by: Huacai Chen <zltjiangshi@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-29MIPS: Initial support of VIA USB controller used by fulong mini pcHuacai Chen
Signed-off-by: Huacai Chen <zltjiangshi@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-29MIPS: Initial support of VIA IDE controller used by fulong mini pcHuacai Chen
Signed-off-by: Huacai Chen <zltjiangshi@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-29Initial support of vt82686b south bridge used by fulong mini pcHuacai Chen
Signed-off-by: Huacai Chen <zltjiangshi@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-29MIPS: Initial support of bonito north bridge used by fulong mini pcHuacai Chen
Signed-off-by: Huacai Chen <zltjiangshi@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-29tcg-s390: new TCG TargetRichard Henderson
Original patch from Ulrich Hecht, further work from Alexander Graf and Richard Henderson. Cc: Ulrich Hecht <uli@suse.de> Cc: Alexander Graf <agraf@suse.de> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-06-29tcg-ppc: Conditionally reserve TCG_GUEST_BASE_REG.Richard Henderson
We need not reserve the register unless we're going to use it. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: malc <av1474@comtv.ru>
2010-06-28kvm: Fix cpu_is_bsp() compilation warningSheng Yang
Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-06-28kvm: init mp_stateMarcelo Tosatti
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-06-28kvm: Enable XSAVE live migration supportSheng Yang
Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-06-28Enable XSAVE related CPUIDSheng Yang
We can support it in KVM now. The 0xd leaf is queried from KVM. Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-06-28kvm: Extend kvm_arch_get_supported_cpuid() to support indexSheng Yang
Would use it later for XSAVE related CPUID. Signed-off-by: Sheng Yang <sheng@linux.intel.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-06-28fix CPUID vendor overrideAndre Przywara
the meaning of vendor_override is actually the opposite of how it is currently used :-( Fix it to allow KVM to export the non-native CPUID vendor if explicitly requested by the user. The intended behavior is: With TCG: - always inject the configured vendor (either hard-coded, in config files or via ",vendor=" commandline) With KVM: - by default inject the host's vendor - if the user specifies ",vendor=" on the commandline, use this instead of the host's vendor - all pre-configured vendors (hard-coded, config file) are ignored Signed-off-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
2010-06-28kvm: Switch kvm_update_guest_debug to run_on_cpuJan Kiszka
Guest debugging under KVM is currently broken once io-threads are enabled. Easily fixable by switching the fake on_vcpu to the real run_on_cpu implementation. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-06-27win32: Add missing function ffsStefan Weil
mingw32 does not include function ffs. Commit c6d29ad6e24533cc3762e1d654275607e1d03058 added a declaration for ffs, but an implementation was missing. For compilations with optimization, the compiler creates inline code, so the implementation is not always needed. Without optimization, linking fails without this patch. v2: Use __builtin_ffs as suggested by Richard Henderson Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-06-27win32: Add define for missing EPROTONOSUPPORTStefan Weil
mingw32 does not define EPROTONOSUPPORT (which is used by migration.c and maybe future patches), so add a definition which uses a supported errno value. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-05 17:10:36 +0000