aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-03-07slirp: use "slirp_" prefix for inet_aton() win32 implementationMarc-André Lureau
To avoid conflict with QEMU inet_aton() implementation, let's use the "slirp_" prefix. This allows to drop the WITH_QEMU, thus the source won't make a distinction when building with QEMU or not. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20190212162524.31504-4-marcandre.lureau@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2019-03-07slirp: use libslirp migration codeMarc-André Lureau
slirp migration code uses QEMU vmstate so far, when building WITH_QEMU. Introduce slirp_state_{load,save,version}() functions to move the state saving handling to libslirp side. So far, the bitstream compatibility should remain equal with current QEMU, as this is effectively using the same code, with the same format etc. When libslirp is made standalone, we will need some mechanism to ensure bitstream compatibility regardless of the libslirp version installed. See the FIXME note in the code. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20190212162524.31504-3-marcandre.lureau@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2019-03-07slirp: adapt a subset of QEMU vmstate codeMarc-André Lureau
Add vmstate serialization code adapted from QEMU. Keep only the bits that are required for libslirp. Introduce a IStream/OStream interface to replace QEMU QFile abstraction. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20190212162524.31504-2-marcandre.lureau@redhat.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2019-03-06slirp: Mark pieces missing IPv6 supportSamuel Thibault
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2019-03-06slirp: fix big/little endian conversion in ident protocolSamuel Thibault
Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> --- Based-on: <1551476756-25749-1-git-send-email-will@wbowling.info>
2019-03-06slirp: check sscanf result when emulating identWilliam Bowling
When emulating ident in tcp_emu, if the strchr checks passed but the sscanf check failed, two uninitialized variables would be copied and sent in the reply, so move this code inside the if(sscanf()) clause. Signed-off-by: William Bowling <will@wbowling.info> Cc: qemu-stable@nongnu.org Cc: secalert@redhat.com Message-Id: <1551476756-25749-1-git-send-email-will@wbowling.info> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-03-06slirp: check for ioctlsocket error and 0-length udp payload.Vic Lee
Sometimes sorecvfrom() is called from slirp.c because revents == G_IO_IN, but there is 0 bytes available and recvfrom could be blocking indefinitely. This is likely due to 0-length udp payload. This also adds an error checking for ioctlsocket. Signed-off-by: Vic Lee <llyzs.vic@gmail.com> Message-Id: <20190301064809.3074-1-llyzs.vic@gmail.com> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2019-03-06slirp: Fix build with gcc 9Greg Kurz
Build fails with gcc 9: CC slirp/ndp_table.o slirp/ndp_table.c: In function ‘ndp_table_add’: slirp/ndp_table.c:31:23: error: taking address of packed member of ‘struct ndpentry’ may result in an unaligned pointer value [-Werror=address-of-packed-member] 31 | if (in6_equal(&ndp_table->table[i].ip_addr, &ip_addr)) { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ slirp/ndp_table.c: In function ‘ndp_table_search’: slirp/ndp_table.c:75:23: error: taking address of packed member of ‘struct ndpentry’ may result in an unaligned pointer value [-Werror=address-of-packed-member] 75 | if (in6_equal(&ndp_table->table[i].ip_addr, &ip_addr)) { | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors The ndpentry structure isn't used to model on-the-wire data or anything else that would care for the struct layout. It doesn't need to be packed actually. Just drop SLIRP_PACKED. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <155143315831.102868.17515265400523392682.stgit@bahia.lan> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Samuel Thibault <samuel.thibault@ens-lyon.org>
2019-03-06Merge remote-tracking branch ↵Peter Maydell
'remotes/ehabkost/tags/machine-next-pull-request' into staging Machine queue, 2019-03-06 * qdev: Hotplug handler chaining (David Hildenbrand) * qdev: fix qbus_is_full() (Tony Krowiak) * hostmem: fix crash when querying empty host-nodes property via QMP (Igor Mammedov) # gpg: Signature made Wed 06 Mar 2019 18:39:29 GMT # gpg: using RSA key 2807936F984DC5A6 # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" [full] # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * remotes/ehabkost/tags/machine-next-pull-request: qdev: Provide qdev_get_bus_hotplug_handler() qdev: Let machine hotplug handler to override bus hotplug handler qdev: Let the hotplug_handler_unplug() caller delete the device hostmem: fix crash when querying empty host-nodes property via QMP qdev/core: fix qbus_is_full() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-06qdev: Provide qdev_get_bus_hotplug_handler()David Hildenbrand
Let's use a wrapper instead of looking it up manually. This function can than be reused when we explicitly want to have the bus hotplug handler (e.g. when the bus hotplug handler was overwritten by the machine hotplug handler). Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20190228122849.4296-4-david@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-03-06qdev: Let machine hotplug handler to override bus hotplug handlerIgor Mammedov
it will allow to return another hotplug handler than the default one for a specific bus based device type. Which is needed to handle non trivial plug/unplug sequences that need the access to resources configured outside of bus where device is attached. That will allow for returned hotplug handler to orchestrate wiring in arbitrary order, by chaining other hotplug handlers when it's needed. PS: It could be used for hybrid virtio-mem and virtio-pmem devices where it will return machine as hotplug handler which will do necessary wiring at machine level and then pass control down the chain to bus specific hotplug handler. Example of top level hotplug handler override and custom plug sequence: some_machine_get_hotplug_handler(machine){ if (object_dynamic_cast(OBJECT(dev), TYPE_SOME_BUS_DEVICE)) { return HOTPLUG_HANDLER(machine); } return NULL; } some_machine_device_plug(hotplug_dev, dev) { if (object_dynamic_cast(OBJECT(dev), TYPE_SOME_BUS_DEVICE)) { /* do machine specific initialization */ some_machine_init_special_device(dev) /* pass control to bus specific handler */ hotplug_handler_plug(dev->parent_bus->hotplug_handler, dev) } } Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Signed-off-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20190228122849.4296-3-david@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-03-06qdev: Let the hotplug_handler_unplug() caller delete the deviceDavid Hildenbrand
When unplugging a device, at one point the device will be destroyed via object_unparent(). This will, one the one hand, unrealize the removed device hierarchy, and on the other hand, destroy/free the device hierarchy. When chaining hotplug handlers, we want to overwrite a bus hotplug handler by the machine hotplug handler, to be able to perform some part of the plug/unplug and to forward the calls to the bus hotplug handler. For now, the bus hotplug handler would trigger an object_unparent(), not allowing us to perform some unplug action on a device after we forwarded the call to the bus hotplug handler. The device would be gone at that point. machine_unplug_handler(dev) /* eventually do unplug stuff */ bus_unplug_handler(dev) /* dev is gone, we can't do more unplug stuff */ So move the object_unparent() to the original caller of the unplug. For now, keep the unrealize() at the original places of the object_unparent(). For implicitly chained hotplug handlers (e.g. pc code calling acpi hotplug handlers), the object_unparent() has to be done by the outermost caller. So when calling hotplug_handler_unplug() from inside an unplug handler, nothing is to be done. hotplug_handler_unplug(dev) -> calls machine_unplug_handler() machine_unplug_handler(dev) { /* eventually do unplug stuff */ bus_unplug_handler(dev) -> calls unrealize(dev) /* we can do more unplug stuff but device already unrealized */ } object_unparent(dev) In the long run, every unplug action should be factored out of the unrealize() function into the unplug handler (especially for PCI). Then we can get rid of the additonal unrealize() calls and object_unparent() will properly unrealize the device hierarchy after the device has been unplugged. hotplug_handler_unplug(dev) -> calls machine_unplug_handler() machine_unplug_handler(dev) { /* eventually do unplug stuff */ bus_unplug_handler(dev) -> only unplugs, does not unrealize /* we can do more unplug stuff */ } object_unparent(dev) -> will unrealize The original approach was suggested by Igor Mammedov for the PCI part, but I extended it to all hotplug handlers. I consider this one step into the right direction. To summarize: - object_unparent() on synchronous unplugs is done by common code -- "Caller of hotplug_handler_unplug" - object_unparent() on asynchronous unplugs ("unplug requests") has to be done manually -- "Caller of hotplug_handler_unplug" Reviewed-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Cornelia Huck <cohuck@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20190228122849.4296-2-david@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-03-06hostmem: fix crash when querying empty host-nodes property via QMPIgor Mammedov
QEMU will crashes with qapi/qobject-output-visitor.c:210: qobject_output_complete: Assertion `qov->root && ((&qov->stack)->slh_first == ((void *)0))' failed when trying to get value of not set hostmem's "host-nodes" property, HostMemoryBackend::host_nodes bitmap doesn't have any bits set in it, which leads to find_first_bit() returning MAX_NODES and consequently to an early return from host_memory_backend_get_host_nodes() without calling visitor. Fix it by calling visitor even if "host-nodes" property wasn't set before exiting from property getter to return valid empty list. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20190214105733.25643-1-imammedo@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-03-06qdev/core: fix qbus_is_full()Tony Krowiak
The qbus_is_full(BusState *bus) function (qdev_monitor.c) compares the max_index value of the BusState structure with the max_dev value of the BusClass structure to determine whether the maximum number of children has been reached for the bus. The problem is, the max_index field of the BusState structure does not necessarily reflect the number of devices that have been plugged into the bus. Whenever a child device is plugged into the bus, the bus's max_index value is assigned to the child device and then incremented. If the child is subsequently unplugged, the value of the max_index does not change and no longer reflects the number of children. When the bus's max_index value reaches the maximum number of devices allowed for the bus (i.e., the max_dev field in the BusClass structure), attempts to plug another device will be rejected claiming that the bus is full -- even if the bus is actually empty. To resolve the problem, a new 'num_children' field is being added to the BusState structure to keep track of the number of children plugged into the bus. It will be incremented when a child is plugged, and decremented when a child is unplugged. Signed-off-by: Tony Krowiak <akrowiak@linux.ibm.com> Reviewed-by: Pierre Morel<pmorel@linux.ibm.com> Reviewed-by: Halil Pasic <pasic@linux.ibm.com> Message-Id: <1545062250-7573-1-git-send-email-akrowiak@linux.ibm.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
2019-03-06Merge remote-tracking branch ↵Peter Maydell
'remotes/dgilbert/tags/pull-migration-20190306a' into staging Migation pull 2019-03-06 (This replaces the pull sent yesterday) a) 4 small fixes including the cancel problem that caused the ahci migration test to fail intermittently b) Yury's ignore-shared feature c) Juan's extra tests d) Wei Wang's free page hinting e) Some Colo fixes from Zhang Chen Diff from yesterdays pull: 1) A missing fix of mine (cleanup during exit) 2) Changes from Eric/Markus on 'Create socket-address parameter' # gpg: Signature made Wed 06 Mar 2019 11:39:53 GMT # gpg: using RSA key 0516331EBC5BFDE7 # gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full] # Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7 * remotes/dgilbert/tags/pull-migration-20190306a: (22 commits) qapi/migration.json: Remove a variable that doesn't exist in example Migration/colo.c: Make COLO node running after failover Migration/colo.c: Fix double close bug when occur COLO failover virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINT migration/ram.c: add the free page optimization enable flag migration/ram.c: add a notifier chain for precopy migration: API to clear bits of guest free pages from the dirty bitmap migration: use bitmap_mutex in migration_bitmap_clear_dirty bitmap: bitmap_count_one_with_offset bitmap: fix bitmap_count_one tests: Add basic migration precopy tcp test migration: Create socket-address parameter tests: Add migration xbzrle test migration: Add capabilities validation tests/migration-test: Add a test for ignore-shared capability migration: Add an ability to ignore shared RAM blocks migration: Introduce ignore-shared capability exec: Change RAMBlockIterFunc definition migration/rdma: clang compilation fix migration: Cleanup during exit ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-06Merge remote-tracking branch ↵Peter Maydell
'remotes/vivier2/tags/trivial-branch-pull-request' into staging trivial patches pull request (20190206) - acpi: remove unused functions/variables - tests: remove useless architecture checks - some typo fixes and documentation update - flash_cfi02: fix memory leak # gpg: Signature made Wed 06 Mar 2019 11:05:12 GMT # gpg: using RSA key F30C38BD3F2FBE3C # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier2/tags/trivial-branch-pull-request: thunk: fix of malloc to g_new hostmem-file: simplify ifdef-s in file_backend_memory_alloc() build: Correct explanation of unnest-vars example bswap: Fix accessors syntax in comment doc: fix typos for documents in tree block/pflash_cfi02: Fix memory leak and potential use-after-free hw/acpi: remove unnecessary variable acpi_table_builtin hw/acpi: remove unused function acpi_table_add_builtin() hw/i386/pc.c: remove unused function pc_acpi_init() tests: Remove (mostly) useless architecture checks Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-06qapi/migration.json: Remove a variable that doesn't exist in exampleZhang Chen
Remove the "active" variable in example for query-colo-status. It is a doc bug from commit f56c0065 Signed-off-by: Zhang Chen <chen.zhang@intel.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20190303145021.2962-6-chen.zhang@intel.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-03-06Migration/colo.c: Make COLO node running after failoverZhang Chen
Delay to close COLO for auto start VM after failover. Signed-off-by: Zhang Chen <chen.zhang@intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20190303145021.2962-4-chen.zhang@intel.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-03-06Migration/colo.c: Fix double close bug when occur COLO failoverZhang Chen
In migration_incoming_state_destroy(void) will check the mis->to_src_file to double close the mis->to_src_file when occur COLO failover. Signed-off-by: Zhang Chen <chen.zhang@intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20190303145021.2962-2-chen.zhang@intel.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-03-06virtio-balloon: VIRTIO_BALLOON_F_FREE_PAGE_HINTWei Wang
The new feature enables the virtio-balloon device to receive hints of guest free pages from the free page vq. A notifier is registered to the migration precopy notifier chain. The notifier calls free_page_start after the migration thread syncs the dirty bitmap, so that the free page optimization starts to clear bits of free pages from the bitmap. It calls the free_page_stop before the migration thread syncs the bitmap, which is the end of the current round of ram save. The free_page_stop is also called to stop the optimization in the case when there is an error occurred in the process of ram saving. Note: balloon will report pages which were free at the time of this call. As the reporting happens asynchronously, dirty bit logging must be enabled before this free_page_start call is made. Guest reporting must be disabled before the migration dirty bitmap is synchronized. Signed-off-by: Wei Wang <wei.w.wang@intel.com> CC: Michael S. Tsirkin <mst@redhat.com> CC: Dr. David Alan Gilbert <dgilbert@redhat.com> CC: Juan Quintela <quintela@redhat.com> CC: Peter Xu <peterx@redhat.com> Message-Id: <1544516693-5395-8-git-send-email-wei.w.wang@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> dgilbert: Dropped kernel header update, fixed up CMD_ID_* name change
2019-03-06migration/ram.c: add the free page optimization enable flagWei Wang
This patch adds the free page optimization enable flag, and a function to set this flag. When the free page optimization is enabled, not all the pages are needed to be sent in the bulk stage. Why using a new flag, instead of directly disabling ram_bulk_stage when the optimization is running? Thanks for Peter Xu's reminder that disabling ram_bulk_stage will affect the use of compression. Please see save_page_use_compression. When xbzrle and compression are used, if free page optimizaion causes the ram_bulk_stage to be disabled, save_page_use_compression will return false, which disables the use of compression. That is, if free page optimization avoids the sending of half of the guest pages, the other half of pages loses the benefits of compression in the meantime. Using a new flag to let migration_bitmap_find_dirty skip the free pages in the bulk stage will avoid the above issue. Signed-off-by: Wei Wang <wei.w.wang@intel.com> CC: Dr. David Alan Gilbert <dgilbert@redhat.com> CC: Juan Quintela <quintela@redhat.com> CC: Michael S. Tsirkin <mst@redhat.com> CC: Peter Xu <peterx@redhat.com> Message-Id: <1544516693-5395-7-git-send-email-wei.w.wang@intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-03-06migration/ram.c: add a notifier chain for precopyWei Wang
This patch adds a notifier chain for the memory precopy. This enables various precopy optimizations to be invoked at specific places. Signed-off-by: Wei Wang <wei.w.wang@intel.com> CC: Dr. David Alan Gilbert <dgilbert@redhat.com> CC: Juan Quintela <quintela@redhat.com> CC: Michael S. Tsirkin <mst@redhat.com> CC: Peter Xu <peterx@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-Id: <1544516693-5395-6-git-send-email-wei.w.wang@intel.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-03-06migration: API to clear bits of guest free pages from the dirty bitmapWei Wang
This patch adds an API to clear bits corresponding to guest free pages from the dirty bitmap. Spilt the free page block if it crosses the QEMU RAMBlock boundary. Signed-off-by: Wei Wang <wei.w.wang@intel.com> CC: Dr. David Alan Gilbert <dgilbert@redhat.com> CC: Juan Quintela <quintela@redhat.com> CC: Michael S. Tsirkin <mst@redhat.com> CC: Peter Xu <peterx@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-Id: <1544516693-5395-5-git-send-email-wei.w.wang@intel.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-03-06migration: use bitmap_mutex in migration_bitmap_clear_dirtyWei Wang
The bitmap mutex is used to synchronize threads to update the dirty bitmap and the migration_dirty_pages counter. For example, the free page optimization clears bits of free pages from the bitmap in an iothread context. This patch makes migration_bitmap_clear_dirty update the bitmap and counter under the mutex. Signed-off-by: Wei Wang <wei.w.wang@intel.com> CC: Dr. David Alan Gilbert <dgilbert@redhat.com> CC: Juan Quintela <quintela@redhat.com> CC: Michael S. Tsirkin <mst@redhat.com> CC: Peter Xu <peterx@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Message-Id: <1544516693-5395-4-git-send-email-wei.w.wang@intel.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-03-06bitmap: bitmap_count_one_with_offsetWei Wang
Count the number of 1s in a bitmap starting from an offset. Signed-off-by: Wei Wang <wei.w.wang@intel.com> CC: Dr. David Alan Gilbert <dgilbert@redhat.com> CC: Juan Quintela <quintela@redhat.com> CC: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <1544516693-5395-3-git-send-email-wei.w.wang@intel.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-03-06bitmap: fix bitmap_count_oneWei Wang
BITMAP_LAST_WORD_MASK(nbits) returns 0xffffffff when "nbits=0", which makes bitmap_count_one fail to handle the "nbits=0" case. It appears to be preferred to remain BITMAP_LAST_WORD_MASK identical to the kernel implementation that it is ported from. So this patch fixes bitmap_count_one to handle the nbits=0 case. Inital Discussion Link: https://www.mail-archive.com/qemu-devel@nongnu.org/msg554316.html Signed-off-by: Wei Wang <wei.w.wang@intel.com> CC: Juan Quintela <quintela@redhat.com> CC: Dr. David Alan Gilbert <dgilbert@redhat.com> CC: Peter Xu <peterx@redhat.com> Message-Id: <1544516693-5395-2-git-send-email-wei.w.wang@intel.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-03-06tests: Add basic migration precopy tcp testJuan Quintela
Not sharing code from precopy/unix because we have to read back the tcp parameter. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190227105128.1655-4-quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> dgilbert: Fixup for clash with Yury's
2019-03-06migration: Create socket-address parameterJuan Quintela
It will be used to store the uri parameters. We want this only for tcp, so we don't set it for other uris. We need it to know what port is migration running. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> dgilbert: Removed DummyStruct as suggested by Eric & Markus --
2019-03-06tests: Add migration xbzrle testJuan Quintela
Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Message-Id: <20190227105128.1655-2-quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> dgilbert: Fixup for class with Yury's series
2019-03-06migration: Add capabilities validationYury Kotov
Currently we don't check which capabilities set in the source QEMU. We just expect that the target QEMU has the same enabled capabilities. Add explicit validation for capabilities to make sure that the target VM has them too. This is enabled for only new capabilities to keep compatibily. Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru> Message-Id: <20190215174548.2630-6-yury-kotov@yandex-team.ru> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> dgilbert: Manual merge
2019-03-06tests/migration-test: Add a test for ignore-shared capabilityYury Kotov
Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru> Message-Id: <20190215174548.2630-5-yury-kotov@yandex-team.ru> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> dgilbert: Disabled the test for now, not happy on aarch64
2019-03-06migration: Add an ability to ignore shared RAM blocksYury Kotov
If ignore-shared capability is set then skip shared RAMBlocks during the RAM migration. Also, move qemu_ram_foreach_migratable_block (and rename) to the migration code, because it requires access to the migration capabilities. Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru> Message-Id: <20190215174548.2630-4-yury-kotov@yandex-team.ru> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-03-06migration: Introduce ignore-shared capabilityYury Kotov
We want to use local migration to update QEMU for running guests. In this case we don't need to migrate shared (file backed) RAM. So, add a capability to ignore such blocks during live migration. Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru> Message-Id: <20190215174548.2630-3-yury-kotov@yandex-team.ru> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-03-06exec: Change RAMBlockIterFunc definitionYury Kotov
Currently, qemu_ram_foreach_* calls RAMBlockIterFunc with many block-specific arguments. But often iter func needs RAMBlock*. This refactoring is needed for fast access to RAMBlock flags from qemu_ram_foreach_block's callback. The only way to achieve this now is to call qemu_ram_block_from_host (which also enumerates blocks). So, this patch reduces complexity of qemu_ram_foreach_block() -> cb() -> qemu_ram_block_from_host() from O(n^2) to O(n). Fix RAMBlockIterFunc definition and add some functions to read RAMBlock* fields witch were passed. Signed-off-by: Yury Kotov <yury-kotov@yandex-team.ru> Message-Id: <20190215174548.2630-2-yury-kotov@yandex-team.ru> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-03-06migration/rdma: clang compilation fixMarcel Apfelbaum
Configuring QEMU with: ../configure --cc=clang --enable-rdma Leads to compilation error: CC migration/rdma.o CC migration/block.o qemu/migration/rdma.c:3615:58: error: taking address of packed member 'rkey' of class or structure 'RDMARegisterResult' may result in an unaligned pointer value [-Werror,-Waddress-of-packed-member] (uintptr_t)host_addr, NULL, &reg_result->rkey, ^~~~~~~~~~~~~~~~ Fix it by using a temp local variable. Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Message-Id: <20190304184923.24215-1-marcel.apfelbaum@gmail.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-03-06migration: Cleanup during exitDr. David Alan Gilbert
Currently we cleanup the migration object as we exit main after the main_loop finishes; however if there's a migration running things get messy and we can end up with the migration thread still trying to access freed structures. We now take a ref to the object around the migration thread itself, so the act of dropping the ref during exit doesn't cause us to lose the state until the thread quits. Cancelling the migration during migration also tries to get the thread to quit. We do this a bit earlier; so hopefully migration gets out of the way before all the devices etc are freed. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Tested-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20190227164900.16378-1-dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2019-03-06migration/rdma: Fix qemu_rdma_cleanup null checkDr. David Alan Gilbert
If the migration fails before the channel is open (e.g. a bad address) we end up in the cleanup with rdma->channel==NULL. Spotted by Coverity: CID 1398634 Fixes: fbbaacab2758cb3f32a0 Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20190214185351.5927-1-dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-03-06migration: Fix cancel stateDr. David Alan Gilbert
During a cancelled migration there's a race where the fd can go into an error state before we get back around the migration loop and migration_detect_error transitions from cancelling->failed. Check for cancelled/cancelling and don't change the state. Red Hat bug: https://bugzilla.redhat.com/show_bug.cgi?id=1608649 Fixes: b23c2ade250 Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20190219195928.12289-1-dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com>
2019-03-06thunk: fix of malloc to g_newAarushi Mehta
Note that since thunking occurs throughout the lifetime of the QEMU instance, there is no matching 'free' to correct. Signed-off-by: Aarushi Mehta <mehta.aaru20@gmail.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <5310bd5d152fa36c1828a7cbd19fc893739d1609.camel@gmail.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-03-06hostmem-file: simplify ifdef-s in file_backend_memory_alloc()Igor Mammedov
cleanup file_backend_memory_alloc() by using one CONFIG_POSIX ifdef instead of several ones within the function to make it simpler to follow. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Suggested-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Wei Yang <richardw.yang@linux.intel.com> Message-Id: <20190213123858.24620-1-imammedo@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20190214031004.32522-2-stefanha@redhat.com> [lv: s/hostmem/hostmem-file/] Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-03-06build: Correct explanation of unnest-vars exampleMarkus Armbruster
Cc: Fam Zheng <fam@euphon.net> Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20190213130240.15492-1-armbru@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-03-06bswap: Fix accessors syntax in commentGreg Kurz
All accessors that have an endian infix DO have an underscore between {size} and {endian}. Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <155119086741.1037569.12734854713022304642.stgit@bahia.lan> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-03-06doc: fix typos for documents in treeLike Xu
Signed-off-by: Like Xu <like.xu@linux.intel.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <1550640446-18788-1-git-send-email-like.xu@linux.intel.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-03-06block/pflash_cfi02: Fix memory leak and potential use-after-freeStephen Checkoway
Don't dynamically allocate the pflash's timer. But do use timer_del in an unrealize function to make sure that the timer can't fire after the pflash_t has been freed. Signed-off-by: Stephen Checkoway <stephen.checkoway@oberlin.edu> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Wei Yang <richardw.yang@linux.intel.com> Message-Id: <20190219153727.62279-1-stephen.checkoway@oberlin.edu> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-03-06hw/acpi: remove unnecessary variable acpi_table_builtinWei Yang
acpi_table_builtin is now always false, it is not necessary to check it again. This patch just removes it. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20190214084939.20640-4-richardw.yang@linux.intel.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-03-06hw/acpi: remove unused function acpi_table_add_builtin()Wei Yang
Function acpi_table_add_builtin() is not used anymore. Remove the definition and declaration. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20190214084939.20640-3-richardw.yang@linux.intel.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-03-06hw/i386/pc.c: remove unused function pc_acpi_init()Wei Yang
Function pc_acpi_init() is not used anymore. Remove the definition and declaration. Signed-off-by: Wei Yang <richardw.yang@linux.intel.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-Id: <20190214084939.20640-2-richardw.yang@linux.intel.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-03-06tests: Remove (mostly) useless architecture checksThomas Huth
These checks at the beginning of some of the tests are mostly useless: We only run the tests on x86 anyway, and g_test_message() does not print anything unless you call g_test_init() first. Signed-off-by: Thomas Huth <thuth@redhat.com> Acked-by: John Snow <jsnow@redhat.com> Acked-by: Corey Minyard <cminyard@mvista.com> Message-Id: <1551456970-463-1-git-send-email-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2019-03-05Merge remote-tracking branch 'remotes/amarkovic/tags/mips-queue-mar-05-2019' ↵Peter Maydell
into staging MIPS queue for March 5th, 2019 # gpg: Signature made Tue 05 Mar 2019 16:06:34 GMT # gpg: using RSA key D4972A8967F75A65 # gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65 * remotes/amarkovic/tags/mips-queue-mar-05-2019: target/mips: Add tests for integer add MSA instruction group tests/tcg: target/mips: Add tests for MSA pack instructions tests/tcg: target/mips: Add tests for MIPS64R6 int multiply instructions tests/tcg: target/mips: Add tests for MIPS64R6 shift instructions tests/tcg: target/mips: Add tests for MIPS64R6 bit count instructions tests/tcg: target/mips: Add tests for MIPS64R6 bit swap instructions tests/tcg: target/mips: Add tests for MIPS64R6 logic instructions tests/tcg: target/mips: Add wrappers for some MIPS64R6 instructions tests/tcg: target/mips: Extend functionality of MSA wrapper macros tests/tcg: target/mips: Fix test utilities for 128-bit tests tests/tcg: target/mips: Add test utilities for 64-bit tests tests/tcg: target/mips: Add test utilities for 32-bit tests tests/tcg: target/mips: Add wrappers for various MSA instructions disas: nanoMIPS: Add graphical description of pool organization disas: nanoMIPS: Correct comments to handlers of some DSP instructions Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-03-05Merge remote-tracking branch 'remotes/armbru/tags/pull-qapi-2019-03-05' into ↵Peter Maydell
staging QAPI patches for 2019-03-05 # gpg: Signature made Tue 05 Mar 2019 16:47:17 GMT # gpg: using RSA key 3870B400EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full] # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full] # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-qapi-2019-03-05: qapi: Fix array first used in a different module tests/qapi-schema: Cover forward reference to sub-module tests: Rename UserDefNativeListUnion to UserDefListUnion qapi: Fix code generation for sub-modules in other directories qapi: Pass file name to QAPIGen constructor instead of methods tests/qapi-schema: Cover conditional arrays tests/qapi-schema: Make test-qapi.py print arrays Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-04 02:14:00 +0000