aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-03-11hw/core: Cleanup unused included headers in cpu-common.cZhao Liu
Remove unused headers in cpu-common.c: * qemu/notify.h * exec/cpu-common.h * qemu/error-report.h * qemu/qemu-print.h Tested by "./configure" and then "make". Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20240311075621.3224684-2-zhao1.liu@linux.intel.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-03-11sun4u: remap ebus BAR0 to use unassigned_io_ops instead of alias to PCI IO spaceMark Cave-Ayland
During kernel startup OpenBSD accesses addresses mapped by BAR0 of the ebus device but at offsets where no IO devices exist. Before commit 4aa07e8649 ("hw/sparc64/ebus: Access memory regions via pci_address_space_io()") BAR0 was mapped to legacy IO space which allows accesses to unmapped devices to succeed, but afterwards these accesses to unmapped PCI IO space cause a memory fault which prevents OpenBSD from booting. Since no devices are mapped at the addresses accessed by OpenBSD, change ebus BAR0 from a PCI IO space alias to an IO memory region using unassigned_io_ops which allows these accesses to succeed and so allows OpenBSD to boot once again. Fixes: 4aa07e8649 ("hw/sparc64/ebus: Access memory regions via pci_address_space_io()") Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20240311064345.2531197-1-mark.cave-ayland@ilande.co.uk> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-03-11hw/misc/ivshmem: Fix missing ERRP_GUARD() for error_prepend()Zhao Liu
As the comment in qapi/error, passing @errp to error_prepend() requires ERRP_GUARD(): * = Why, when and how to use ERRP_GUARD() = * * Without ERRP_GUARD(), use of the @errp parameter is restricted: ... * - It should not be passed to error_prepend(), error_vprepend() or * error_append_hint(), because that doesn't work with &error_fatal. * ERRP_GUARD() lifts these restrictions. * * To use ERRP_GUARD(), add it right at the beginning of the function. * @errp can then be used without worrying about the argument being * NULL or &error_fatal. ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user can't see this additional information, because exit() happens in error_setg earlier than information is added [1]. The ivshmem_common_realize() passes @errp to error_prepend(), and as a DeviceClass.realize method, there are too many possible callers to check the impact of this defect; it may or may not be harmless. Thus it is necessary to protect @errp with ERRP_GUARD(). To avoid the issue like [1] said, add missing ERRP_GUARD() at the beginning of this function. [1]: Issue description in the commit message of commit ae7c80a7bd73 ("error: New macro ERRP_GUARD()"). Cc: Juan Quintela <quintela@trasno.org> Cc: Manos Pitsidianakis <manos.pitsidianakis@linaro.org> Cc: Michael Galaxy <mgalaxy@akamai.com> Cc: Steve Sistare <steven.sistare@oracle.com> Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Message-ID: <20240311033822.3142585-17-zhao1.liu@linux.intel.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-03-11hw/core/qdev-properties-system: Fix missing ERRP_GUARD() for error_prepend()Zhao Liu
As the comment in qapi/error, passing @errp to error_prepend() requires ERRP_GUARD(): * = Why, when and how to use ERRP_GUARD() = * * Without ERRP_GUARD(), use of the @errp parameter is restricted: ... * - It should not be passed to error_prepend(), error_vprepend() or * error_append_hint(), because that doesn't work with &error_fatal. * ERRP_GUARD() lifts these restrictions. * * To use ERRP_GUARD(), add it right at the beginning of the function. * @errp can then be used without worrying about the argument being * NULL or &error_fatal. ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user can't see this additional information, because exit() happens in error_setg earlier than information is added [1]. The set_chr() passes @errp to error_prepend() without ERRP_GUARD(). As a PropertyInfo.set method, there are too many possible callers to check the impact of this defect; it may or may not be harmless. Thus it is necessary to protect @errp with ERRP_GUARD(). To avoid the issue like [1] said, add missing ERRP_GUARD() at the beginning of this function. [1]: Issue description in the commit message of commit ae7c80a7bd73 ("error: New macro ERRP_GUARD()"). Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: "Daniel P. Berrangé" <berrange@redhat.com Cc: Eduardo Habkost <eduardo@habkost.net> Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Message-ID: <20240311033822.3142585-16-zhao1.liu@linux.intel.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-03-11hw/core/loader-fit: Fix missing ERRP_GUARD() for error_prepend()Zhao Liu
As the comment in qapi/error, passing @errp to error_prepend() requires ERRP_GUARD(): * = Why, when and how to use ERRP_GUARD() = * * Without ERRP_GUARD(), use of the @errp parameter is restricted: ... * - It should not be passed to error_prepend(), error_vprepend() or * error_append_hint(), because that doesn't work with &error_fatal. * ERRP_GUARD() lifts these restrictions. * * To use ERRP_GUARD(), add it right at the beginning of the function. * @errp can then be used without worrying about the argument being * NULL or &error_fatal. ERRP_GUARD() could avoid the case when @errp is &error_fatal, the user can't see this additional information, because exit() happens in error_setg earlier than information is added [1]. In hw/core/loader-fit.c, there are 2 functions passing @errp to error_prepend() without ERRP_GUARD(): - fit_load_kernel() - fit_load_fdt() Their @errp parameters are both the pointers of the local @err virable in load_fit(). Though they don't cause the issue like [1] said, to follow the requirement of @errp, add missing ERRP_GUARD() at their beginning. [1]: Issue description in the commit message of commit ae7c80a7bd73 ("error: New macro ERRP_GUARD()"). Cc: Paul Burton <paulburton@kernel.org> Cc: Aleksandar Rikalo <aleksandar.rikalo@syrmia.com> Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Message-ID: <20240311033822.3142585-15-zhao1.liu@linux.intel.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-03-11hw/ppc/sam460ex: Support short options for adding drivesBALATON Zoltan
Having to use -drive if=none,... and -device ide-[cd,hd] is inconvenient. Add support for shorter convenience options such as -cdrom and -drive media=disk. Also adjust two nearby comments for code style. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Message-ID: <20240305225721.E9A404E6005@zero.eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-03-11hw/pci: add some convenient trace-events for pcie and shpc hotplugVladimir Sementsov-Ogievskiy
Add trace-events that may help to debug problems with hotplugging. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20240301154146.761531-2-vsementsov@yandex-team.ru> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-03-11hw/ide/ahci: Rename ahci_internal.h to ahci-internal.hBALATON Zoltan
Other headers now use dash instead of underscore. Rename ahci_internal.h accordingly for consistency. Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-ID: <20240227131310.C24EB4E6005@zero.eik.bme.hu> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-03-11migration/multifd: Add new migration test cases for legacy zero page checking.Hao Xiang
Now that zero page checking is done on the multifd sender threads by default, we still provide an option for backward compatibility. This change adds a qtest migration test case to set the zero-page-detection option to "legacy" and run multifd migration with zero page checking on the migration main thread. Signed-off-by: Hao Xiang <hao.xiang@bytedance.com> Reviewed-by: Peter Xu <peterx@redhat.com> Link: https://lore.kernel.org/r/20240311180015.3359271-8-hao.xiang@linux.dev Signed-off-by: Peter Xu <peterx@redhat.com>
2024-03-11migration/multifd: Enable multifd zero page checking by default.Hao Xiang
1. Set default "zero-page-detection" option to "multifd". Now zero page checking can be done in the multifd threads and this becomes the default configuration. 2. Handle migration QEMU9.0 -> QEMU8.2 compatibility. We provide backward compatibility where zero page checking is done from the migration main thread. Signed-off-by: Hao Xiang <hao.xiang@bytedance.com> Reviewed-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Peter Xu <peterx@redhat.com> Link: https://lore.kernel.org/r/20240311180015.3359271-7-hao.xiang@linux.dev Signed-off-by: Peter Xu <peterx@redhat.com>
2024-03-11migration/multifd: Implement ram_save_target_page_multifd to handle multifd ↵Hao Xiang
version of MigrationOps::ram_save_target_page. 1. Add a dedicated handler for MigrationOps::ram_save_target_page in multifd live migration. 2. Refactor ram_save_target_page_legacy so that the legacy and multifd handlers don't have internal functions calling into each other. Signed-off-by: Hao Xiang <hao.xiang@bytedance.com> Reviewed-by: Fabiano Rosas <farosas@suse.de> Message-Id: <20240226195654.934709-4-hao.xiang@bytedance.com> Link: https://lore.kernel.org/r/20240311180015.3359271-6-hao.xiang@linux.dev Signed-off-by: Peter Xu <peterx@redhat.com>
2024-03-11migration/multifd: Implement zero page transmission on the multifd thread.Hao Xiang
1. Add zero_pages field in MultiFDPacket_t. 2. Implements the zero page detection and handling on the multifd threads for non-compression, zlib and zstd compression backends. 3. Added a new value 'multifd' in ZeroPageDetection enumeration. 4. Adds zero page counters and updates multifd send/receive tracing format to track the newly added counters. Signed-off-by: Hao Xiang <hao.xiang@bytedance.com> Acked-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Fabiano Rosas <farosas@suse.de> Link: https://lore.kernel.org/r/20240311180015.3359271-5-hao.xiang@linux.dev Signed-off-by: Peter Xu <peterx@redhat.com>
2024-03-11migration/multifd: Add new migration option zero-page-detection.Hao Xiang
This new parameter controls where the zero page checking is running. 1. If this parameter is set to 'legacy', zero page checking is done in the migration main thread. 2. If this parameter is set to 'none', zero page checking is disabled. Signed-off-by: Hao Xiang <hao.xiang@bytedance.com> Reviewed-by: Peter Xu <peterx@redhat.com> Acked-by: Markus Armbruster <armbru@redhat.com> Link: https://lore.kernel.org/r/20240311180015.3359271-4-hao.xiang@linux.dev Signed-off-by: Peter Xu <peterx@redhat.com>
2024-03-11migration/multifd: Allow clearing of the file_bmap from multifdFabiano Rosas
We currently only need to clear the mapped-ram file bitmap from the migration thread during save_zero_page. We're about to add support for zero page detection on the multifd thread, so allow ramblock_set_file_bmap_atomic() to also clear the bits. Signed-off-by: Fabiano Rosas <farosas@suse.de> Link: https://lore.kernel.org/r/20240311180015.3359271-3-hao.xiang@linux.dev Signed-off-by: Peter Xu <peterx@redhat.com>
2024-03-11migration/multifd: Allow zero pages in file migrationFabiano Rosas
Currently, it's an error to have no data pages in the multifd file migration because zero page detection is done in the migration thread and zero pages don't reach multifd. This is enforced with the pages->num assert. We're about to add zero page detection on the multifd thread. Fix the file_write_ramblock_iov() to stop considering p->iovs_num=0 an error. Signed-off-by: Fabiano Rosas <farosas@suse.de> Link: https://lore.kernel.org/r/20240311180015.3359271-2-hao.xiang@linux.dev Signed-off-by: Peter Xu <peterx@redhat.com>
2024-03-11migration: purge MigrationState from public interfaceSteve Sistare
Move remaining MigrationState references from the public file misc.h to the private file migration.h. Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Link: https://lore.kernel.org/r/1710179338-294359-12-git-send-email-steven.sistare@oracle.com Signed-off-by: Peter Xu <peterx@redhat.com>
2024-03-11migration: delete unused accessorsSteve Sistare
Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Link: https://lore.kernel.org/r/1710179338-294359-11-git-send-email-steven.sistare@oracle.com Signed-off-by: Peter Xu <peterx@redhat.com>
2024-03-11migration: privatize colo interfacesSteve Sistare
Remove private migration interfaces from net/colo-compare.c and push them to migration/colo.c. Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Link: https://lore.kernel.org/r/1710179338-294359-10-git-send-email-steven.sistare@oracle.com Signed-off-by: Peter Xu <peterx@redhat.com>
2024-03-11migration: migration_file_set_errorSteve Sistare
Define and export migration_file_set_error to eliminate a dependency on MigrationState. Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Link: https://lore.kernel.org/r/1710179338-294359-9-git-send-email-steven.sistare@oracle.com Signed-off-by: Peter Xu <peterx@redhat.com>
2024-03-11migration: migration_is_deviceSteve Sistare
Define and export migration_is_device to eliminate a dependency on MigrationState. Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Link: https://lore.kernel.org/r/1710179338-294359-8-git-send-email-steven.sistare@oracle.com Signed-off-by: Peter Xu <peterx@redhat.com>
2024-03-11migration: migration_thread_is_selfSteve Sistare
Define and export migration_thread_is_self to eliminate a dependency on MigrationState. Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Link: https://lore.kernel.org/r/1710179338-294359-7-git-send-email-steven.sistare@oracle.com Signed-off-by: Peter Xu <peterx@redhat.com>
2024-03-11migration: export vcpu_dirty_limit_periodSteve Sistare
Define and export vcpu_dirty_limit_period to eliminate a dependency on MigrationState. Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Link: https://lore.kernel.org/r/1710179338-294359-6-git-send-email-steven.sistare@oracle.com Signed-off-by: Peter Xu <peterx@redhat.com>
2024-03-11migration: export migration_is_runningSteve Sistare
Delete the MigrationState parameter from migration_is_running and move it to the public API in misc.h. Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Link: https://lore.kernel.org/r/1710179338-294359-5-git-send-email-steven.sistare@oracle.com Signed-off-by: Peter Xu <peterx@redhat.com>
2024-03-11migration: export migration_is_activeSteve Sistare
Delete the MigrationState parameter from migration_is_active so it can be exported and used without including migration.h. Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Link: https://lore.kernel.org/r/1710179338-294359-4-git-send-email-steven.sistare@oracle.com Signed-off-by: Peter Xu <peterx@redhat.com>
2024-03-11migration: export migration_is_setup_or_activeSteve Sistare
Delete the MigrationState parameter from migration_is_setup_or_active and move it to the public API in misc.h. Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Link: https://lore.kernel.org/r/1710179338-294359-3-git-send-email-steven.sistare@oracle.com Signed-off-by: Peter Xu <peterx@redhat.com>
2024-03-11migration: remove migration.h referencesSteve Sistare
Remove migration.h from files that no longer need it due to previous commits. Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Link: https://lore.kernel.org/r/1710179338-294359-2-git-send-email-steven.sistare@oracle.com Signed-off-by: Peter Xu <peterx@redhat.com>
2024-03-11migration: export fewer optionsSteve Sistare
A small number of migration options are accessed by migration clients, but to see them clients must include all of options.h, which is mostly for migration core code. migrate_mode() in particular will be needed by multiple clients. Refactor the option declarations so clients can see the necessary few via misc.h, which already exports a portion of the client API. Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Link: https://lore.kernel.org/r/1710179319-294320-1-git-send-email-steven.sistare@oracle.com Signed-off-by: Peter Xu <peterx@redhat.com>
2024-03-11Merge tag 'm68k-for-9.0-pull-request' of https://github.com/vivier/qemu-m68k ↵Peter Maydell
into staging Pull request for m68k 20240311 # -----BEGIN PGP SIGNATURE----- # # iQJGBAABCAAwFiEEzS913cjjpNwuT1Fz8ww4vT8vvjwFAmXvQTASHGxhdXJlbnRA # dml2aWVyLmV1AAoJEPMMOL0/L748O2kQAIao4j6Ktj/Ngt1H0QyVL5tvarcxI3VC # D4jRzWTnTF4sAuBLMVZdsRHXquAyx9qe716TEgu6L+fJOUXiJujPmZ+1Gt8pqEnj # N0DG81I5PQvh9wKsSJ5M4P96EjIkBwSA9MkkkyXSdNadidXkQzhYC9Ooes0bY+c6 # 85h3SPewtLbtht350/00h/hPxjNiYMwQVLM+a/erXbLHJR87eJRB7Av/zVnyh0yv # yHzfPDcbtXdmQL/ztGaFdNWyLZOfQT45h4PbW81tYOSdl0LIc14HKAkwEyG0aVKo # p4XlaElYkFShOA4Qk8dLtQNNflUGry97krpMx41I7EdZn1whsPTXQpT7480ZO6+h # f/l2fC11B7K8V3m36iTmugIZSJnEeokH3FsKQ3CGszJgi6KABuxNpoSqugZLrqye # BkOgVuj9Z3wmbqYAyDTPwoh+uOZ+p3u7efHJjfG6V9Qb88X3zvJi2kaS7YSM/VzM # 9PPOFHwL7mmpyjKs6CK3OmB7BkkiMiuKZb3x69XIkDO/IAwty9GiPmVmbVkBZQPW # zKQeCfrH6u4GVvfgeMsfw4Fw/MNDHcCcgg1BQ/l7oVaY4VklTm8uNZcKP4xKrQgV # y8ZLh5Hov/8TmjmVz4bgcktsYq0GC/wakzUZTSvnmbCooAp4woC4r5F12B5Cod0g # LDHuQCElH59d # =kYnz # -----END PGP SIGNATURE----- # gpg: Signature made Mon 11 Mar 2024 17:36:48 GMT # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * tag 'm68k-for-9.0-pull-request' of https://github.com/vivier/qemu-m68k: virt: set the CPU type in BOOTINFO Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-11Merge tag 'qga-pull-2024-03-11-2' of https://github.com/kostyanf14/qemu into ↵Peter Maydell
staging qga-pull-2024-03-11-2 # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCAAdFiEEwsLBCepDxjwUI+uE711egWG6hOcFAmXvMF4ACgkQ711egWG6 # hOd7GQ/9H11bXH5U2HZHAyEv68rCuGxHt57yjy9GfrSGAE7kqkLJ0bHwxdgoj09A # mmaTOakOEhM5tyrkFYsROde3ta0fAwdFQXyhqpWDHG0ZwDDCAlsNsEuDd541KXbg # qFTue26BM4EJEwTYy94nEEhOHD+2GgEAuPIsUCF6QDhrq+sBqUts1pH3uUM+E3Sg # 7HSXaF9O/RbgYR6J8FVA53tvNOP4WgOYZ/SZoFwKYzIOAblcaRgJvVbm600OqQDb # DUZ96s6HUBVBazKx4t24WwPOkgcvYgp7b8QYj2VVfjRU2IHnFumv9A47KuEdJEUl # meZlo8TsgfL+uSiYWiRvps1Eo1uoS2M4s4FYGbuOeABYviLr3XhJM7VarNyPp7nf # lupuyeqydXCic5LFbjSg5gkpaIhFYQ9gANYr6JZjPPjX5G8hmgCeB6YsZT98Ygmi # yG1np2luapvFGsDCPd8kgNpfTkKhOpKghUnTC3UESReV8mjBGhJHRQTd+lMV7YWJ # reMRxlqrqNq69lDUnlNuSXOqPJX1qHHGkWuV9pdz641tFvw7vigE07qhvsCr8Y7b # tAg6oDcw+1uuq2t3nHmfkzic6WTxb4lFmSpShsDu2sRA7MqWE3lCefNoS75R+xaI # FebdrkjkFxdbazyl6oKXwxkOkAR7rFoTvVKKbG79DVMIBDiu4BE= # =Xt/n # -----END PGP SIGNATURE----- # gpg: Signature made Mon 11 Mar 2024 16:25:02 GMT # gpg: using RSA key C2C2C109EA43C63C1423EB84EF5D5E8161BA84E7 # gpg: Good signature from "Kostiantyn Kostiuk (Upstream PR sign) <kkostiuk@redhat.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: C2C2 C109 EA43 C63C 1423 EB84 EF5D 5E81 61BA 84E7 * tag 'qga-pull-2024-03-11-2' of https://github.com/kostyanf14/qemu: qga-win: Add support of Windows Server 2025 in get-osinfo command qga/commands-win32: Do not set matrix_lookup_t/win_10_0_t arrays size qga/commands-win32: Declare const qualifier before type Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-11Merge tag 'pull-vfio-20240310' of https://github.com/legoater/qemu into stagingPeter Maydell
vfio queue: * Allow cpr-reboot for vfio # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmXtrhMACgkQUaNDx8/7 # 7KFCgw/7BEdbP4e32/+D0Mk1+oeiulgGvo/kPtg7waWACrijWxG5K5/c0kcFnhte # OnpDfObnF7l2GjKU61SAluTocWcVbb8A61Tt5+ta5xxPQGp5XCXF7aIkb/DQQDq/ # yU7pQCmqMMSgo+siR6yb+g/2t71dYlMyCbW3LU5/oGQkFtsSXjWHqnTut+wFeuRT # Vd62vHcZqHWG2epoyEnW3HCVMrZ8Dl+PLGkORV55P6uEzZuKwgoCTmR2m5/NLkdU # SF4ZnZzruqkc1dsRh+vYFglQ6GttzWz1VBJg8GJTwrXAJ7C7JSTS25fNRNNhRkJl # 2/DZbdMyyJWJmrv9AXwWEEJ+bSSbM3uM76hqgMFVUlyz9y8FXduwf4MIkZjl0Jg5 # phJb3Awxxxd61I3vWhi9lZKS/RHQ5anA+rBt/4RxdnzqZ3mDcoBhiEjNaGp1Yghv # QbkOSUmY8aBFdeqaw4UqpL2l6mlN/idAOIyq7ADp0S2/eNftw/FGBEu+KP5C/IZF # vReB36qWws9go9w8aDdyK/1bB9vMI3fo/AA8Y4Cnr22tEbgctfygl2jmmyHZUFDI # R8/NESzv17G2/g7OowCqG0qrOWW+UTDcDCkOlVFlLABiij9aNUYV631cQ379K7tR # mFo10BlTcXV83XkA9iM9qqIIVNoYm5uJRva+oEaBncRIAGiYTF4= # =kiGc # -----END PGP SIGNATURE----- # gpg: Signature made Sun 10 Mar 2024 12:56:51 GMT # gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1 # gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1 * tag 'pull-vfio-20240310' of https://github.com/legoater/qemu: vfio: allow cpr-reboot migration if suspended vfio: register container for cpr Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-11migration: Fix format in error messageAnthony PERARD
In file_write_ramblock_iov(), "offset" is "uintptr_t" and not "ram_addr_t". While usually they are both equivalent, this is not the case with CONFIG_XEN_BACKEND. Use the right format. This will fix build on 32-bit. Fixes: f427d90b9898 ("migration/multifd: Support outgoing mapped-ram stream format") Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Link: https://lore.kernel.org/r/20240311123439.16844-1-anthony.perard@citrix.com Signed-off-by: Peter Xu <peterx@redhat.com>
2024-03-11physmem: Fix wrong address in large address_space_read/write_cached_slow()Jonathan Cameron
If the access is bigger than the MemoryRegion supports, flatview_read/write_continue() will attempt to update the Memory Region. but the address passed to flatview_translate() is relative to the cache, not to the FlatView. On arm/virt with interleaved CXL memory emulation and virtio-blk-pci this lead to the first part of descriptor being read from the CXL memory and the second part from PA 0x8 which happens to be a blank region of a flash chip and all ffs on this particular configuration. Note this test requires the out of tree ARM support for CXL, but the problem is more general. Avoid this by adding new address_space_read_continue_cached() and address_space_write_continue_cached() which share all the logic with the flatview versions except for the MemoryRegion lookup which is unnecessary as the MemoryRegionCache only covers one MemoryRegion. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/20240307153710.30907-5-Jonathan.Cameron@huawei.com Signed-off-by: Peter Xu <peterx@redhat.com>
2024-03-11physmem: Factor out body of flatview_read/write_continue() loopJonathan Cameron
This code will be reused for the address_space_cached accessors shortly. Also reduce scope of result variable now we aren't directly calling this in the loop. Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20240307153710.30907-4-Jonathan.Cameron@huawei.com Signed-off-by: Peter Xu <peterx@redhat.com>
2024-03-11physmem: Reduce local variable scope in flatview_read/write_continue()Jonathan Cameron
Precursor to factoring out the inner loops for reuse. Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: David Hildenbrand <david@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Link: https://lore.kernel.org/r/20240307153710.30907-3-Jonathan.Cameron@huawei.com Signed-off-by: Peter Xu <peterx@redhat.com>
2024-03-11physmem: Rename addr1 to more informative mr_addr in flatview_read/write() ↵Jonathan Cameron
and similar The calls to flatview_read/write[_continue]() have parameters addr and addr1 but the names give no indication of what they are addresses of. Rename addr1 to mr_addr to reflect that it is the translated address offset within the MemoryRegion returned by flatview_translate(). Similarly rename the parameter in address_space_read/write_cached_slow() Suggested-by: Peter Xu <peterx@redhat.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Reviewed-by: David Hildenbrand <david@redhat.com> Link: https://lore.kernel.org/r/20240307153710.30907-2-Jonathan.Cameron@huawei.com Signed-off-by: Peter Xu <peterx@redhat.com>
2024-03-11migration/rdma: Fix a memory issue for migrationYu Zhang
In commit 3fa9642ff7 change was made to convert the RDMA backend to accept MigrateAddress struct. However, the assignment of "host" leads to data corruption on the target host and the failure of migration. isock->host = rdma->host; By allocating the memory explicitly for it with g_strdup_printf(), the issue is fixed and the migration doesn't fail any more. Fixes: 3fa9642ff7 ("migration: convert rdma backend to accept MigrateAddress") Cc: qemu-stable <qemu-stable@nongnu.org> Cc: Li Zhijian <lizhijian@fujitsu.com> Link: https://lore.kernel.org/r/CAHEcVy4L_D6tuhJ8h=xLR4WaPaprJE3nnxZAEyUnoTrxQ6CF5w@mail.gmail.com Signed-off-by: Yu Zhang <yu.zhang@ionos.com> [peterx: use g_strdup() instead of g_strdup_printf(), per Zhijian] Signed-off-by: Peter Xu <peterx@redhat.com>
2024-03-11migration/multifd: Don't fsync when closing QIOChannelFileFabiano Rosas
Commit bc38feddeb ("io: fsync before closing a file channel") added a fsync/fdatasync at the closing point of the QIOChannelFile to ensure integrity of the migration stream in case of QEMU crash. The decision to do the sync at qio_channel_close() was not the best since that function runs in the main thread and the fsync can cause QEMU to hang for several minutes, depending on the migration size and disk speed. To fix the hang, remove the fsync from qio_channel_file_close(). At this moment, the migration code is the only user of the fsync and we're taking the tradeoff of not having a sync at all, leaving the responsibility to the upper layers. Fixes: bc38feddeb ("io: fsync before closing a file channel") Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com> Signed-off-by: Fabiano Rosas <farosas@suse.de> Link: https://lore.kernel.org/r/20240305195629.9922-1-farosas@suse.de Link: https://lore.kernel.org/r/20240305174332.2553-1-farosas@suse.de [peterx: add more comment to the qio_channel_close()] Signed-off-by: Peter Xu <peterx@redhat.com>
2024-03-11migration: Do not call PRECOPY_NOTIFY_SETUP notifiers in case of errorCédric Le Goater
When commit bd2270608fa0 ("migration/ram.c: add a notifier chain for precopy") added PRECOPY_NOTIFY_SETUP notifiers at the end of qemu_savevm_state_setup(), it didn't take into account a possible error in the loop calling vmstate_save() or .save_setup() handlers. Check ret value before calling the notifiers. Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Cédric Le Goater <clg@redhat.com> Link: https://lore.kernel.org/r/20240304122844.1888308-10-clg@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com>
2024-03-11migration: Add documentation for SaveVMHandlersCédric Le Goater
The SaveVMHandlers structure is still in use for complex subsystems and devices. Document the handlers since we are going to modify a few later. Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Cédric Le Goater <clg@redhat.com> Link: https://lore.kernel.org/r/20240304122844.1888308-9-clg@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com>
2024-03-11migration: Remove SaveStateHandler and LoadStateHandler typedefsCédric Le Goater
They are only used once. Reviewed-by: Fabiano Rosas <farosas@suse.de> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Cédric Le Goater <clg@redhat.com> Link: https://lore.kernel.org/r/20240304122844.1888308-8-clg@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com>
2024-03-11migration: Report error when shutdown failsCédric Le Goater
This will help detect issues regarding I/O channels usage. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Cédric Le Goater <clg@redhat.com> Link: https://lore.kernel.org/r/20240304122844.1888308-7-clg@redhat.com Signed-off-by: Peter Xu <peterx@redhat.com>
2024-03-11migration/ram: add additional checkMaksim Davydov
If a migration stream is broken, the address and flag reading can return zero. Thus, an irrelevant flag error will be returned instead of EIO. It can be fixed by additional check after the reading. Signed-off-by: Maksim Davydov <davydov-max@yandex-team.ru> Link: https://lore.kernel.org/r/20240304144203.158477-1-davydov-max@yandex-team.ru Signed-off-by: Peter Xu <peterx@redhat.com>
2024-03-11vfio/migration: Add a note about migration rate limitingAvihai Horon
VFIO migration buffer size is currently limited to 1MB. Therefore, there is no need to check if migration rate exceeded, as in the worst case it will exceed by only 1MB. However, if the buffer size is later changed to a bigger value, vfio_save_iterate() should enforce migration rate (similar to migration RAM code). Add a note about this in vfio_save_iterate() to serve as a reminder. Suggested-by: Peter Xu <peterx@redhat.com> Signed-off-by: Avihai Horon <avihaih@nvidia.com> Reviewed-by: Fabiano Rosas <farosas@suse.de> Link: https://lore.kernel.org/r/20240304105339.20713-4-avihaih@nvidia.com Signed-off-by: Peter Xu <peterx@redhat.com>
2024-03-11vfio/migration: Refactor vfio_save_state() return valueAvihai Horon
Currently, vfio_save_state() returns 1 regardless of whether there is more data to send or not. This was done to prevent a fast changing VFIO device from potentially blocking other devices from sending their data, as qemu_savevm_state_iterate() serialized devices. Now that qemu_savevm_state_iterate() no longer serializes devices, there is no need for that. Refactor vfio_save_state() to return 0 if more data is available and 1 if no more data is available. Signed-off-by: Avihai Horon <avihaih@nvidia.com> Reviewed-by: Fabiano Rosas <farosas@suse.de> Link: https://lore.kernel.org/r/20240304105339.20713-3-avihaih@nvidia.com Signed-off-by: Peter Xu <peterx@redhat.com>
2024-03-11migration: Don't serialize devices in qemu_savevm_state_iterate()Avihai Horon
Commit 90697be8896c ("live migration: Serialize vmstate saving in stage 2") introduced device serialization in qemu_savevm_state_iterate(). The rationale behind it was to first complete migration of slower changing block devices and only then migrate the RAM, to avoid sending fast changing RAM pages over and over. This commit was added a long time ago, and while it was useful back then, it is not the case anymore: 1. Block migration is deprecated, see commit 66db46ca83b8 ("migration: Deprecate block migration"). 2. Today there are other iterative devices besides RAM and block, such as VFIO, which are registered for migration after RAM. With current serialization behavior, a fast changing device can block other devices from sending their data, which may prevent migration from converging in some cases. The issue described in item 2 was observed in several VFIO migration scenarios with switchover-ack capability enabled, where some workload on the VM prevented RAM from ever reaching a hard zero, thus blocking VFIO initial pre-copy data from being sent. Hence, destination could not ack switchover and migration could not converge. Fix that by not serializing iterative devices in qemu_savevm_state_iterate(). Note that this still doesn't fully prevent device starvation. As correctly pointed out by Peter [1], a fast changing device might constantly consume all allocated bandwidth and block the following devices. However, this scenario is more likely to happen only if max-bandwidth is low. [1] https://lore.kernel.org/qemu-devel/Zd6iw9dBhW6wKNxx@x1n/ Signed-off-by: Avihai Horon <avihaih@nvidia.com> Reviewed-by: Fabiano Rosas <farosas@suse.de> Link: https://lore.kernel.org/r/20240304105339.20713-2-avihaih@nvidia.com Signed-off-by: Peter Xu <peterx@redhat.com>
2024-03-11docs: update copyright date to the year 2024Ani Sinha
We are already in the third month of 2024 but the copyright notices still refer to 2023. Update the date to 2024 in documentation and help texts. Cc: peter.maydell@linaro.org Cc: qemu-trivial@nongnu.org Signed-off-by: Ani Sinha <anisinha@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240311120346.9596-1-anisinha@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-11contrib/elf2dmp: Ensure phdrs fit in fileAkihiko Odaki
Callers of elf64_getphdr() and elf_getphdrnum() assume phdrs are accessible. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2202 Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Tested-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240307-elf2dmp-v4-19-4f324ad4d99d@daynix.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-11contrib/elf2dmp: Clamp QEMU note to file sizeAkihiko Odaki
This fixes crashes with truncated dumps. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu> Message-id: 20240307-elf2dmp-v4-18-4f324ad4d99d@daynix.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-11contrib/elf2dmp: Use GPtrArrayAkihiko Odaki
This removes the need to enumarate QEMUCPUState twice and saves code. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu> Message-id: 20240307-elf2dmp-v4-17-4f324ad4d99d@daynix.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-11MAINTAINERS: Add Akihiko Odaki as a elf2dmp reviewerAkihiko Odaki
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu> Reviewed-by: Viktor Prutyanov <viktor.prutyanov@phystech.edu> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240307-elf2dmp-v4-15-4f324ad4d99d@daynix.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-16 18:49:29 +0000