aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-01-31target/hppa: Increase number of temp regsRichard Henderson
HP-UX 10.20 CD contains "add r0, r0, r27" in a delay slot, which uses at least 5 temps. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-31target/hppa: Only use EXCP_DTLB_MISSRichard Henderson
Unknown why this works, but if we return EXCP_ITLB_MISS we will triple-fault the first userland instruction fetch. Is it something to do with having a combined I/DTLB? Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-31target/hppa: Implement B,GATE insnRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-31target/hppa: Add migration for the cpuRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-31target/hppa: Add system registers to gdbstubRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-31target/hppa: Optimize for flat addressing spaceRichard Henderson
Linux sets sr4-sr7 all to the same value, which means that we need not do any runtime computation to find out what space to use in forming the GVA. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-31target/hppa: Implement halt and reset instructionsHelge Deller
Real hardware would use an external device to control the power. But for the moment let's invent instructions in reserved space, to be used by our custom firmware. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30target/hppa: Implement SYNCDMA insnRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30target/hppa: Implement LCIRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30target/hppa: Implement LPARichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30target/hppa: Implement LDWARichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30target/hppa: Implement P*TLB and P*TLBE insnsRichard Henderson
We now have all of the TLB manipulation instructions. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30target/hppa: Implement I*TLBA and I*TLBP insnsRichard Henderson
The TLB can now be populated, but it cannot yet be cleared. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30target/hppa: Log unimplemented instructionsRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30target/hppa: Implement the interval timerRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30target/hppa: Implement external interruptsRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30target/hppa: Implement tlb_fillRichard Henderson
However since HPPA has a software-managed TLB, and the relevant TLB manipulation instructions are not implemented, this does not actually do anything. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30target/hppa: Implement IASQRichard Henderson
Any one TB will have only one space value. If we change spaces, we change TBs. Thus BE and BEV must exit the TB immediately. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30target/hppa: Avoid privilege level decrease during branchesRichard Henderson
These instructions force the destination privilege level of the branch destination to be no higher than current. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30target/hppa: Use space registers in data operationsRichard Henderson
This changes the system virtual address width to 64-bit and incorporates the space registers into load/store operations. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30target/hppa: Implement unaligned access trapRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30target/hppa: Fill in hppa_cpu_do_interrupt/hppa_cpu_exec_interruptRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30target/hppa: Implement rfiRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30target/hppa: Adjust insn mask for mfctl,wRichard Henderson
While the E bit is only used for pa2.0 mfctl,w from sar, the otherwise reserved bit does not appear to be decoded. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30target/hppa: Add control registersRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30target/hppa: Add space registersRichard Henderson
Not used where they should be yet, but we can copy them. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30target/hppa: Implement the system mask instructionsRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30target/hppa: Implement mmu_idx from IA privilege levelRichard Henderson
Most aspects of privilege are not yet handled. But this gives us the start from which to begin checking. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30target/hppa: Split address size from register sizeRichard Henderson
For system mode, we will need 64-bit virtual addresses even when we have 32-bit register sizes. Since the rest of QEMU equates TARGET_LONG_BITS with the address size, redefine everything related to register size in terms of a new TARGET_REGISTER_BITS. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30target/hppa: Define hardware exception typesRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30target/hppa: Disable gateway page emulation for system modeRichard Henderson
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30target/hppa: Define the rest of the PSWRichard Henderson
We don't actually do anything with most of the bits yet, but at least they have names and we have somewhere to store them. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30target/hppa: Skeleton support for hppa-softmmuHelge Deller
With the addition of default-configs/hppa-softmmu.mak, this will compile. It is not enabled with this patch, however. Signed-off-by: Helge Deller <deller@gmx.de> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2018-01-30Merge remote-tracking branch ↵Peter Maydell
'remotes/stefanberger/tags/pull-tpm-2018-01-26-2' into staging Merge tpm 2018/01/26 v2 # gpg: Signature made Mon 29 Jan 2018 22:20:05 GMT # gpg: using RSA key 0x75AD65802A0B4211 # gpg: Good signature from "Stefan Berger <stefanb@linux.vnet.ibm.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: B818 B9CA DF90 89C2 D5CE C66B 75AD 6580 2A0B 4211 * remotes/stefanberger/tags/pull-tpm-2018-01-26-2: tpm: add CRB device tpm: report backend request error tpm: replace GThreadPool with AIO threadpool tpm: lookup cancel path under tpm device class tpm: fix alignment issues tpm: Set the flags of the CMD_INIT command to 0 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-30linux-user/signal.c: Rename MC_* definesPeter Maydell
The SPARC code in linux-user/signal.c defines a set of MC_* constants. On some SPARC hosts these are also defined by sys/ucontext.h, resulting in build failures: linux-user/signal.c:2786:0: error: "MC_NGREG" redefined [-Werror] #define MC_NGREG 19 In file included from /usr/include/signal.h:302:0, from include/qemu/osdep.h:86, from linux-user/signal.c:19: /usr/include/sparc64-linux-gnu/sys/ucontext.h:59:0: note: this is the location of the previous definition # define MC_NGREG __MC_NGREG Rename all these constants to SPARC_MC_* to avoid the clash. Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1517318239-15764-1-git-send-email-peter.maydell@linaro.org
2018-01-30Merge remote-tracking branch 'remotes/stefanha/tags/tracing-pull-request' ↵Peter Maydell
into staging # gpg: Signature made Mon 29 Jan 2018 15:49:05 GMT # gpg: using RSA key 0x9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/tracing-pull-request: tracetool: report error on foo() instead of foo(void) tracetool: clarify that "formats" means "format strings" tracetool: prefix parse errors with line numbers Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-29tpm: add CRB deviceMarc-André Lureau
tpm_crb is a device for TPM 2.0 Command Response Buffer (CRB) Interface as defined in TCG PC Client Platform TPM Profile (PTP) Specification Family “2.0” Level 00 Revision 01.03 v22. The PTP allows device implementation to switch between TIS and CRB model at run time, but given that CRB is a simpler device to implement, I chose to implement it as a different device. The device doesn't implement other locality than 0 for now (my laptop TPM doesn't either, so I assume this isn't so bad) Tested with some success with Linux upstream and Windows 10, seabios & modified ovmf. The device is recognized and correctly transmit command/response with passthrough & emu. However, we are missing PPI ACPI part atm. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2018-01-29tpm: report backend request errorMarc-André Lureau
Use an Error** for request to let the caller handle error reporting. This will also allow to inform the frontend of a backend error. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2018-01-29tpm: replace GThreadPool with AIO threadpoolMarc-André Lureau
The TPM backend uses a GThreadPool to handle IO in a seperate thread. However, GThreadPool isn't integrated with Qemu main loops, making it unnecessarily complicated to deal with. Qemu has a AIO threadpool, that is better integrated with loops and various IO functions, provides completion BH by default etc. Remove the only user of GThreadPool from qemu, use AIO threadpool. Note that the backend: - no longer accepts queing multiple requests (unneeded so far) - increase ref to itself when handling a command, for extra safety - tpm_backend_thread_end() is renamed tpm_backend_finish_sync() and will wait for completion of BH (request_completed), which will help migration handling. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2018-01-29tpm: lookup cancel path under tpm device classMarc-André Lureau
Since Linux commit 313d21eeab9282e, tpm devices have their own device class "tpm" and the cancel path must be looked up under /sys/class/tpm/ instead of /sys/class/misc/. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2018-01-29tpm: fix alignment issuesMarc-André Lureau
The new tpm-crb-test fails on sparc host: TEST: tests/tpm-crb-test... (pid=230409) /i386/tpm-crb/test: Broken pipe FAIL GTester: last random seed: R02S29cea50247fe1efa59ee885a26d51a85 (pid=230423) FAIL: tests/tpm-crb-test and generates a new clang sanitizer runtime warning: /home/petmay01/linaro/qemu-for-merges/hw/tpm/tpm_util.h:36:24: runtime error: load of misaligned address 0x7fdc24c00002 for type 'const uint32_t' (aka 'const unsigned int'), which requires 4 byte alignment 0x7fdc24c00002: note: pointer points here <memory cannot be printed> The sparc architecture does not allow misaligned loads and will segfault if you try them. For example, this function: static inline uint32_t tpm_cmd_get_size(const void *b) { return be32_to_cpu(*(const uint32_t *)(b + 2)); } Should read, return ldl_be_p(b + 2); As a general rule you can't take an arbitrary pointer into a byte buffer and try to interpret it as a structure or a pointer to a larger-than-bytesize-data simply by casting the pointer. Use this clean up as an opportunity to remove unnecessary temporary buffers and casts. Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Reviewed-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
2018-01-29tpm: Set the flags of the CMD_INIT command to 0Stefan Berger
The flags of the CMD_INIT control channel command were not initialized properly. Fix this and set to 0. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2018-01-29Merge remote-tracking branch ↵Peter Maydell
'remotes/kraxel/tags/input-20180129-v2-pull-request' into staging input: switch devices to keycodemapdb, bugfixes. # gpg: Signature made Mon 29 Jan 2018 10:23:00 GMT # gpg: using RSA key 0x4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/input-20180129-v2-pull-request: hw: convert virtio-input-hid device to keycodemapdb ui: fix alphabetical ordering of keymaps hw: convert the escc device to keycodemapdb hw: convert ps2 device to keycodemapdb ps2: check PS2Queue pointers in post_load routine input: virtio: don't send mouse wheel event twice input: add mouse side buttons to virtio input Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-29Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into ↵Peter Maydell
staging # gpg: Signature made Mon 29 Jan 2018 08:14:19 GMT # gpg: using RSA key 0xEF04965B398D6211 # gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211 * remotes/jasowang/tags/net-pull-request: MAINTAINERS: update Dmitry Fleytman email qemu-doc: Get rid of "vlan=X" example in the documentation net: Allow netdevs to be used with 'hostfwd_add' and 'hostfwd_remove' net: Allow hubports to connect to other netdevs colo: compare the packet based on the tcp sequence number colo: modified the payload compare function Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-29Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.12-20180129' ↵Peter Maydell
into staging ppc patch queue 2018-01-29 Here's another batch of patches for ppc, spapr and related things. Higlights: * Implement (with a bunch of necessary infrastructure) a hypercall to let guests properly apply Spectre and Meltdown workarounds. * Convert a number of old devices to trace events * Fix some bugs # gpg: Signature made Mon 29 Jan 2018 03:27:30 GMT # gpg: using RSA key 0x6C38CACA20D9B392 # gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" # gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" # gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" # gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" # Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392 * remotes/dgibson/tags/ppc-for-2.12-20180129: target/ppc/spapr: Add H-Call H_GET_CPU_CHARACTERISTICS target/ppc/spapr_caps: Add new tristate cap safe_indirect_branch target/ppc/spapr_caps: Add new tristate cap safe_bounds_check target/ppc/spapr_caps: Add new tristate cap safe_cache target/ppc/spapr_caps: Add support for tristate spapr_capabilities target/ppc/kvm: Add cap_ppc_safe_[cache/bounds_check/indirect_branch] spapr_pci: fix MSI/MSIX selection input: add missing newline from trace-events uninorth: convert to trace-events grackle: convert to trace-events ppc: Deprecate qemu-system-ppcemb ppc/pnv: fix PnvChip redefinition in <hw/ppc/pnv_xscom.h> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-01-29tracetool: report error on foo() instead of foo(void)Stefan Hajnoczi
C functions with no arguments must be declared foo(void) instead of foo(). The tracetool argument list parser has never accepted an empty argument list. This patch adds a clear error message for this error case. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20180110202553.31889-4-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-01-29tracetool: clarify that "formats" means "format strings"Stefan Hajnoczi
The terminology used by tracetool is not consistent with C sprintf or docs/devel/tracing.txt. The word "formats" is sometimes used to mean "format strings". This patch clarifies comments and error messages that contain this word. Note that the error message lines are longer than 80 characters but I have not wrapped them to aid grepping. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20180110202553.31889-3-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-01-29tracetool: prefix parse errors with line numbersStefan Hajnoczi
Include the file line number in the message that is printed when trace-events parse errors are raised. [Use enumerate(fobj, 1) to avoid having to increment a 0-based index later, as suggested by Eric Blake. --Stefan] Suggested-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 20180110202553.31889-2-stefanha@redhat.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-01-29hw: convert virtio-input-hid device to keycodemapdbDaniel P. Berrange
Replace the keymap_qcode table with automatically generated tables. Missing entries in keymap_qcode now fixed: Q_KEY_CODE_ASTERISK -> KEY_KPASTERISK Q_KEY_CODE_KP_MULTIPLY -> KEY_KPASTERISK Q_KEY_CODE_STOP -> KEY_STOP Q_KEY_CODE_AGAIN -> KEY_AGAIN Q_KEY_CODE_PROPS -> KEY_PROPS Q_KEY_CODE_UNDO -> KEY_UNDO Q_KEY_CODE_FRONT -> KEY_FRONT Q_KEY_CODE_COPY -> KEY_COPY Q_KEY_CODE_OPEN -> KEY_OPEN Q_KEY_CODE_PASTE -> KEY_PASTE Q_KEY_CODE_FIND -> KEY_FIND Q_KEY_CODE_CUT -> KEY_CUT Q_KEY_CODE_LF -> KEY_LINEFEED Q_KEY_CODE_HELP -> KEY_HELP Q_KEY_CODE_COMPOSE -> KEY_COMPOSE Q_KEY_CODE_RO -> KEY_RO Q_KEY_CODE_HIRAGANA -> KEY_HIRAGANA Q_KEY_CODE_HENKAN -> KEY_HENKAN Q_KEY_CODE_YEN -> KEY_YEN Q_KEY_CODE_KP_COMMA -> KEY_KPCOMMA Q_KEY_CODE_KP_EQUALS -> KEY_KPEQUAL Q_KEY_CODE_POWER -> KEY_POWER Q_KEY_CODE_SLEEP -> KEY_SLEEP Q_KEY_CODE_WAKE -> KEY_WAKEUP Q_KEY_CODE_AUDIONEXT -> KEY_NEXTSONG Q_KEY_CODE_AUDIOPREV -> KEY_PREVIOUSSONG Q_KEY_CODE_AUDIOSTOP -> KEY_STOPCD Q_KEY_CODE_AUDIOPLAY -> KEY_PLAYPAUSE Q_KEY_CODE_AUDIOMUTE -> KEY_MUTE Q_KEY_CODE_VOLUMEUP -> KEY_VOLUMEUP Q_KEY_CODE_VOLUMEDOWN -> KEY_VOLUMEDOWN Q_KEY_CODE_MEDIASELECT -> KEY_MEDIA Q_KEY_CODE_MAIL -> KEY_MAIL Q_KEY_CODE_CALCULATOR -> KEY_CALC Q_KEY_CODE_COMPUTER -> KEY_COMPUTER Q_KEY_CODE_AC_HOME -> KEY_HOMEPAGE Q_KEY_CODE_AC_BACK -> KEY_BACK Q_KEY_CODE_AC_FORWARD -> KEY_FORWARD Q_KEY_CODE_AC_REFRESH -> KEY_REFRESH Q_KEY_CODE_AC_BOOKMARKS -> KEY_BOOKMARKS NB, the virtio-input device reports a bitmask to the guest driver that has a bit set for each Linux keycode that the host is able to send to the guest. Thus by adding these extra key mappings we are technically changing the host<->guest ABI. This would also happen any time we defined new mappings for QEMU keycodes in future. When a keycode is removed from the list of possible keycodes that host can send to the guest, it means that the guest OS will think it is possible to receive a key that in pratice can never be generated, which is harmless. When a keycode is added to the list of possible keycodes that the host can send to the guest, it means that the guest OS can see an unexpected event. The Linux virtio_input.c driver code simply forwards this event to the input_event() method in the Linux input subsystem. This in turn calls input_handle_event(), which then calls input_get_disposition(). This method checks if the input event is present in the permitted keys bitmap, and if not returns INPUT_IGNORE_EVENT. Thus the unexpected event will get dropped, which is harmless. If the guest OS reboots, or otherwise re-initializes the virt-input device, it will read the new keycode bitmap. No matter how many keys are defined, the config space has a fixed 128 byte bitmap. There is, however, a size field defiend which says how many bytes in the bitmap are used. So the guest OS reads the size of the bitmap, and then it reads the data from bitmap upto the designated size. So if the guest OS re-initializes at precisely the time that QEMU is migrated across versions, in the worst case, it could conceivably read the old size field, but then get the newly updated bitmap. If a key were added this is harmless, since it simply means it may not process the newly added key. If a key were removed, then it could be readnig a byte from the bitmap that was not initialized. Fortunately QEMU always memsets() the entire bitmap to 0, prior to setting keybits. Thus the guest OS will simply read zeros, which is again harmless. Based on this analysis, it is believed that there is no need to preserve the virtio-input-hid keymaps across migration, as the host<->guest ABI change is harmless and self-resolving at time of guest reboot. NB, this behaviour should perhaps be formalized in the virtio-input spec to declare how guest OS drivers should be written to be robust in their handling of the potentially changable key bitmaps. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-id: 20180117164118.8510-5-berrange@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2018-01-29ui: fix alphabetical ordering of keymapsDaniel P. Berrange
The qcode-to-linux keymaps was accidentally added in the wrong place by commit de80d78594b4c3767a12d8d42debcf12cbf85a5b Author: Owen Smith <owen.smith@citrix.com> Date: Fri Nov 3 11:56:28 2017 +0000 ui: generate qcode to linux mappings breaking the alphabetical ordering of keymaps Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180117164118.8510-4-berrange@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-28 08:19:40 +0000