aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-12-03vmstate: remove usused VMSTATE_STRUCT_ARRAY_SIZE_UINT8Juan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03vmstate: Introduce UINT16_TEST supportJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03vmstate: Introduce VMSTATE_STRUCT_POINTER_TESTJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03vmstate: Introduce VMSTATE_STRUCT_TESTJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03vmstate: Add support for VBUFFERSJuan Quintela
Support for buffer that are pointed by a pointer (i.e. not embedded) where the size that we want to use is a field in the state. We also need a new place to store where to start in the middle of the buffer, as now it is a pointer, not the offset of the 1st field. Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03vmstate: fix missing ARRAY_OF_POINTERS support on save stateJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03vmstate: Fix info field of VMSTATE_MACADDRJan Kiszka
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03vmstate: Avoid seekingJan Kiszka
Seeking on vmstate save/load does not work if the underlying file is a stream. We could try to make all QEMUFile* forward-seek-aware, but first attempts in this direction indicated that it's saner to convert the few qemu_fseek-on-vmstates users to plain reads/writes. This fixes various subtle vmstate corruptions where unused fields were involved. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03lsi53c895a: Implement IRQ on reselectionLaszlo Ast
The critical part of this change is how to deal with simultaneaous generation of interrupts. The only (normal) case when this happens in the emulation is near simultaneous reselection + selection. If selection comes first, there is no problem, since the target attempting reselection loses the arbitration (in the emulation it only means that the reselect function will not be started). In the worst case the host adapter is reselected, but the device driver already started a selection, so we jump to the alternative address to handle the situation. The SCRIPTS code can trigger another interrupt to notify the driver that the new task has to be postponed. I suppose that on real hardware there is enough time after the reselection interrupt to set the SIP bit before the next interrupt comes, so it would result in 2 stacked interrupts (a SCSI and a DMA one). However, in the emulation there is no interrupt stacking, so there is a good chance that the 2 interrupts will get to the interrupt handler at the same time. Nevertheless, it should not make a big difference in interrupt handling, since in both cases both interrupts have to be fetched first, and after that the new task (that failed during the selection phase) has to be prepared/reset for a later restart, and the reconnected device has to be serviced. The changes do not modify the host adapter's behavior if this interrupt is not enabled. See also LSI53C895A technical manual, SCID and SIEN0. Signed-off-by: Laszlo Ast <laszlo.ast@siemens-enterprise.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03lsi53c895a: Use alternative address when already reselectedLaszlo Ast
See SCRIPTS, 3.2.17 SELECT. Signed-off-by: Laszlo Ast <laszlo.ast@siemens-enterprise.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03lsi53c895a: Fix SDID in SELECT ID commandLaszlo Ast
See SCRIPTS Programming Guide, 3.2.17 SELECT. Signed-off-by: Laszlo Ast <laszlo.ast@siemens-enterprise.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03lsi53c895a: Fix message code of DISCONNECTLaszlo Ast
See SCSI-2, 6.5 Message system description/message codes. Signed-off-by: Laszlo Ast <laszlo.ast@siemens-enterprise.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03lsi53c895a: Add support for LSI53C700 Family Compatibility bitLaszlo Ast
Signed-off-by: Laszlo Ast <laszlo.ast@siemens-enterprise.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03lsi53c895a: Whitespace and typo fixesLaszlo Ast
Signed-off-by: Laszlo Ast <laszlo.ast@siemens-enterprise.com> Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi: add read/write 16 commands.Gerd Hoffmann
Add READ_16 + friends to scsi-defs.h, scsi_command_name() and the request parsing helper functions. Use them in scsi-disk.c too. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi-disk: restruct emulation: VERIFYGerd Hoffmann
Move VERIFY emulation from scsi_send_command() to scsi_disk_emulate_command(). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi-disk: restruct emulation: REPORT_LUNSGerd Hoffmann
Move REPORT_LUNS emulation from scsi_send_command() to scsi_disk_emulate_command(). Also add REPORT_LUNS to scsi-defs.h and scsi_command_name(). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi-disk: restruct emulation: SERVICE_ACTION_INGerd Hoffmann
Move SERVICE_ACTION_IN emulation from scsi_send_command() to scsi_disk_emulate_command(). Also add SERVICE_ACTION_IN to scsi-defs.h and scsi_command_name(). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi-disk: restruct emulation: GET_CONFIGURATIONGerd Hoffmann
Move GET_CONFIGURATION emulation from scsi_send_command() to scsi_disk_emulate_command(). Also add GET_CONFIGURATION to scsi-defs.h and scsi_command_name(). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi-disk: restruct emulation: READ_TOCGerd Hoffmann
Move READ_TOC emulation from scsi_send_command() to scsi_disk_emulate_command(). Add scsi_disk_emulate_read_toc() function which holds the longisch READ_TOC emulation code. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi-disk: restruct emulation: SYNCHRONIZE_CACHEGerd Hoffmann
Move SYNCHRONIZE_CACHE emulation from scsi_send_command() to scsi_disk_emulate_command(). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi-disk: restruct emulation: READ_CAPACITYGerd Hoffmann
Move READ_CAPACITY emulation from scsi_send_command() to scsi_disk_emulate_command(). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi-disk: restruct emulation: ALLOW_MEDIUM_REMOVALGerd Hoffmann
Move ALLOW_MEDIUM_REMOVAL emulation from scsi_send_command() to scsi_disk_emulate_command(). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi-disk: restruct emulation: START_STOPGerd Hoffmann
Move START_STOP emulation from scsi_send_command() to scsi_disk_emulate_command(). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi-disk: restruct emulation: MODE_SENSEGerd Hoffmann
Move MODE_SENSE emulation from scsi_send_command() to scsi_disk_emulate_command(). Create two helper functions: mode_sense_page() which writes the actual mode pages and scsi_disk_emulate_mode_sense() which holds the longish MODE_SENSE emulation code, calling into mode_sense_page() as needed. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi-disk: restruct emulation: RESERVE+RELEASEGerd Hoffmann
Move RESERVE+RELEASE emulation from scsi_send_command() to scsi_disk_emulate_command(). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi-disk: restruct emulation: INQUIRYGerd Hoffmann
Move INQUIRY emulation from scsi_send_command() to scsi_disk_emulate_command(). Also split the longish INQUITY emulation code into the new scsi_disk_emulate_inquiry() function. Serial number handling is slightly changed, we don't copy it any more but look it up directly in DriveInfo which we have at hand anyway. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi-disk: restruct emulation: REQUEST_SENSEGerd Hoffmann
Move REQUEST_SENSE emulation from scsi_send_command() to scsi_disk_emulate_command(). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi-disk: restruct emulation: core + TEST_UNIT_READY.Gerd Hoffmann
Add new scsi_disk_emulate_command() function, which will -- when finished -- handle all scsi disk command emulation except actual I/O (READ+WRITE commands) which goes to the block layer. The function builds on top of the new SCSIRequest struct. SCSI command emulation code is moved over from scsi_send_command() in steps to ease review and make it easier to pin down regressions (if any) using bisect. This patch moves over TEST_UNIT_READY only. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi: add scsi_req_print()Gerd Hoffmann
Handy for debugging. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi: move status to SCSIRequest.Gerd Hoffmann
Also add and use the scsi_req_complete() helper function for calling the completion callback. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi: move dinfo to SCSIDeviceGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi: move sense to SCSIDevice, create SCSISense struct.Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi: add xfer modeGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi: use command defines in scsi-disk.cGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi: add request parsing helpers to common code.Gerd Hoffmann
Add helper functions for scsi request parsing to common code. Getting command length, transfer size, and linear block address is handled. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi: move type from SCSIGenericState to SCSIDeviceGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi: add scsi-defs.hGerd Hoffmann
Largely based on <scsi/scsi.h> from linux. Added into the tree so we can use the defines everywhere, not just in scsi-generic.c (which is linux-specific). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi: move blocksize from SCSIGenericState to SCSIDeviceGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi: move scsi command buffer from SCSIGenericReq to SCSIRequest.Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi: move SCSIRequest management to common code.Gerd Hoffmann
Create generic functions to allocate, find and release SCSIRequest structs. Make scsi-disk and scsi-generic use them. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi: move request lists to QTAILQ.Gerd Hoffmann
Changes: * Move from open-coded lists to QTAILQ macros. * Move the struct elements to the common data structures (SCSIDevice + SCSIRequest). * Drop free request pools. * Fix request cleanup in the destroy callback. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi: create common SCSIRequest structure.Gerd Hoffmann
Rename the SCSIRequest structs in scsi-disk.c and scsi-generic.c to SCSIDiskReq and SCSIGenericReq. Create a SCSIRequest struct and move the common elements over. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03scsi: add/fix header protection.Gerd Hoffmann
Also delete the leftover and unused scsi-disk.h file. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03net: fix vnet_hdr handling in solaris tap codeMark McLoughlin
Print an error if the user specifies vnet_hdr=1 on the cmdline. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03net: initialize vnet_hdr in net_init_tap()Mark McLoughlin
net_tap_init() always sets vnet_hdr using qemu_opt_get_bool(), but initialize it in net_init_tap() just to reduce confusion. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03net: check for TUNSETOFFLOAD support before trying to enable offload featuresPierre Riteau
This avoids the "TUNSETOFFLOAD ioctl() failed: Invalid argument" message on kernels without TUNSETOFFLOAD support. Signed-off-by: Pierre Riteau <Pierre.Riteau@irisa.fr> Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03net: fix TAP networking on host kernels without IFF_VNET_HDR supportPierre Riteau
vnet_hdr is initialized at 1 by default. We need to reset it to 0 if the kernel doesn't support IFF_VNET_HDR. Signed-off-by: Pierre Riteau <Pierre.Riteau@irisa.fr> Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03net: print correct error for '-netdev ""'Mark McLoughlin
Reported-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-03net: fix qemu_announce_self()Mark McLoughlin
Now that we have a way to iterate NICs. Signed-off-by: Mark McLoughlin <markmc@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-26 15:37:47 +0000