aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-03-05exec/memattrs: Remove target_tlb_bit*Richard Henderson
These fields are no longer used since 937f224559. Target specific extensions to the page tables should be done with TARGET_PAGE_ENTRY_EXTRA. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240301204110.656742-3-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-05target/arm: Support 32-byte alignment in pow2_alignRichard Henderson
Now that we have removed TARGET_PAGE_BITS_MIN-6 from TLB_FLAGS_MASK, we can test for 32-byte alignment. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240301204110.656742-2-richard.henderson@linaro.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-05tests/qtest/stm32l4x5_rcc-test.c: Add tests for the STM32L4x5_RCCArnaud Minier
Tests: - the ability to change the sysclk of the device - the ability to enable/disable/configure the PLLs - if the clock multiplexers work - the register flags and the generation of irqs Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Acked-by: Thomas Huth <thuth@redhat.com> Message-id: 20240303140643.81957-9-arnaud.minier@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-05hw/arm/stm32l4x5_soc.c: Use the RCC SysclkArnaud Minier
Now that we can generate reliable clock frequencies from the RCC, remove the hacky definition of the sysclk in the b_l475e_iot01a initialisation code and use the correct RCC clock. Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240303140643.81957-8-arnaud.minier@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-05hw/misc/stm32l4x5_rcc: Add write protections to CR registerArnaud Minier
Add write protections for the fields in the CR register. PLL configuration write protections (among others) have not been handled yet. This is planned in a future patch set. Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Message-id: 20240303140643.81957-7-arnaud.minier@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-05hw/misc/stm32l4x5_rcc: Handle Register UpdatesArnaud Minier
Update the RCC state and propagate frequency changes when writing to the RCC registers. Currently, ICSCR, CIER, the reset registers and the stop mode registers are not implemented. Some fields have not been implemented due to uncertainty about how to handle them (Like the clock security system or bypassing mecanisms). Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Message-id: 20240303140643.81957-6-arnaud.minier@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-05hw/misc/stm32l4x5_rcc: Initialize PLLs and clock multiplexersArnaud Minier
Instantiate the whole clock tree and using the Clock multiplexers and the PLLs defined in the previous commits. This allows to statically define the clock tree and easily follow the clock signal from one end to another. Also handle three-phase reset now that we have defined a known base state for every object. (Reset handling based on hw/misc/zynq_sclr.c) Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Message-id: 20240303140643.81957-5-arnaud.minier@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-05hw/misc/stm32l4x5_rcc: Add an internal PLL Clock objectArnaud Minier
This object represents the PLLs and their channels. The PLLs allow for a more fine-grained control of the clocks frequency. The migration handling is based on hw/misc/zynq_sclr.c. Three phase reset will be handled in a later commit. Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Message-id: 20240303140643.81957-4-arnaud.minier@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-05hw/misc/stm32l4x5_rcc: Add an internal clock multiplexer objectArnaud Minier
This object is used to represent every multiplexer in the clock tree as well as every clock output, every presecaler, frequency multiplier, etc. This allows to use a generic approach for every component of the clock tree (except the PLLs). The migration handling is based on hw/misc/zynq_sclr.c. Three phase reset will be handled in a later commit. Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20240303140643.81957-3-arnaud.minier@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-05hw/misc/stm32l4x5_rcc: Implement STM32L4x5_RCC skeletonArnaud Minier
Add the necessary files to add a simple RCC implementation with just reads from and writes to registers. Also instantiate the RCC in the STM32L4x5_SoC. It is needed for accurate emulation of all the SoC clocks and timers. Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr> Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240303140643.81957-2-arnaud.minier@telecom-paris.fr Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-05hw/char/pl011: Add support for loopbackTong Ho
This patch adds loopback for sent characters, sent BREAK, and modem-control signals. Loopback of send and modem-control is often used for uart self tests in real hardware but missing from current pl011 model, resulting in self-test failures when running in QEMU. This implementation matches what is observed in real pl011 hardware placed in loopback mode: 1. Input characters and BREAK events from serial backend are ignored, but 2. Both TX characters and BREAK events are still sent to serial backend, in addition to be looped back to RX. Signed-off-by: Tong Ho <tong.ho@amd.com> Signed-off-by: Francisco Iglesias <francisco.iglesias@amd.com> Message-id: 20240227054855.44204-1-tong.ho@amd.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-05tests/qtest: Add testcase for BCM2835 BSCRayhan Faizel
Simple testcase for validating proper operation of read and write for all three BSC controllers. Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240224191038.2409945-4-rayhan.faizel@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-05hw/arm: Connect BSC to BCM2835 board as I2C0, I2C1 and I2C2Rayhan Faizel
BCM2835 has three I2C controllers. All of them share the same interrupt line. Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20240224191038.2409945-3-rayhan.faizel@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-05hw/i2c: Implement Broadcom Serial Controller (BSC)Rayhan Faizel
A few deficiencies in the current device model need to be noted. 1. FIFOs are not used. All sends and receives are done directly. 2. Repeated starts are not emulated. Repeated starts can be triggered in real hardware by sending a new read transfer request in the window time between transfer active set of write transfer request and done bit set of the same. Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240224191038.2409945-2-rayhan.faizel@gmail.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-05Merge tag 'pull-qapi-2024-03-04' of https://repo.or.cz/qemu/armbru into stagingPeter Maydell
QAPI patches patches for 2024-03-04 # -----BEGIN PGP SIGNATURE----- # # iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmXlaSISHGFybWJydUBy # ZWRoYXQuY29tAAoJEDhwtADrkYZTdZ8P/iMgqLoAFkCCjwfkUc/rqZUezK52Ynr7 # LYwOPI/xcYD7EnVogdRgFgjWFNoivQLP5yKsU/eRTk29pwdDzTscFm/0ztTQX/Gb # ypWV+GBcu5J8mKbp1KF5w68aDD8Bat4WRfEgDQ1DV7v6CoMiUzTiF3CGXkYzqK5Y # kYNq97vdEkBFvFdOl/7scs/XXN2jG27egDhMp68RTxnPHlXZiAO9/2Bul3uVe3x0 # fzQ2ViYv0qLnjE/PwENDqqE3Thv3Sxp5iEeQQ6GWi07EVh07UtHpOM3RYyrTU0Sb # VrTApSrg0oxlkOuR0CBd9Fi+timtbokBL0DWyUpXNTfIEZfLtA9H+8riUg3EOcDp # r7a4SI/27VdPxX6Kc6zA3bi+/j1o7CLTW2LGEwuZs52nmixoo1HTWPIFdyh13g/V # QjNbun0fViHb0FVLiyDlXF/7Y+EWUWIyqwwGqbvve1DyUHQmo3CUQAKGOpkeKSBe # 4eGciVDgpBoKhtw9Kv6LCDj2cwZKC8DxBMibf7GHkOnAsX2mnyuHcey7HvYNCoF+ # yYz7oIEXdlL2eWqg7CfBZK7lniCDln50RI4Ll1v+J4r1v1kRZGMLesTYXCdNc4ku # yb4kpU4t22/RODffLE7K+fc3Onwze3fcfxlZMN66F+wFtk4KdPR2aQBE66bB8J99 # vuSKlTbT4cGL # =s9AR # -----END PGP SIGNATURE----- # gpg: Signature made Mon 04 Mar 2024 06:24:34 GMT # gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653 # gpg: issuer "armbru@redhat.com" # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full] # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full] # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * tag 'pull-qapi-2024-03-04' of https://repo.or.cz/qemu/armbru: migration: simplify exec migration functions qapi: New strv_from_str_list() qapi: New QAPI_LIST_LENGTH() docs/devel/writing-monitor-commands: Minor improvements docs/devel/writing-monitor-commands: Repair a decade of rot qapi: Reject "Returns" section when command doesn't return anything qga/qapi-schema: Fix guest-set-memory-blocks documentation qga/qapi-schema: Tweak documentation of fsfreeze commands qga/qapi-schema: Clean up "Returns" sections qga/qapi-schema: Delete useless "Returns" sections qga/qapi-schema: Move error documentation to new "Errors" sections qapi/yank: Tweak @yank's error description for consistency qapi: Clean up "Returns" sections qapi: Delete useless "Returns" sections qapi: Move error documentation to new "Errors" sections qapi: New documentation section tag "Errors" qapi: Slightly clearer error message for invalid "Returns" section qapi: Memorize since & returns sections Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-05Merge tag 'migration-next-pull-request' of https://gitlab.com/peterx/qemu ↵Peter Maydell
into staging Migartion pull request for 20240304 - Bryan's fix on multifd compression level API - Fabiano's mapped-ram series (base + multifd only) - Steve's amend on cpr document in qapi/ # -----BEGIN PGP SIGNATURE----- # # iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZeUjKhIccGV0ZXJ4QHJl # ZGhhdC5jb20ACgkQO1/MzfOr1wbv5QD/ZexBUsmZA5qyxgGvZ2yvlUBEGNOvtmKY # kRdiYPU7khMA/0N43rn4LcqKCoq4+T+EAnYizGjIyhH/7BRUyn4DUxgO # =AeEn # -----END PGP SIGNATURE----- # gpg: Signature made Mon 04 Mar 2024 01:26:02 GMT # gpg: using EDDSA key B9184DC20CC457DACF7DD1A93B5FCCCDF3ABD706 # gpg: issuer "peterx@redhat.com" # gpg: Good signature from "Peter Xu <xzpeter@gmail.com>" [marginal] # gpg: aka "Peter Xu <peterx@redhat.com>" [marginal] # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: B918 4DC2 0CC4 57DA CF7D D1A9 3B5F CCCD F3AB D706 * tag 'migration-next-pull-request' of https://gitlab.com/peterx/qemu: (27 commits) migration/multifd: Document two places for mapped-ram tests/qtest/migration: Add a multifd + mapped-ram migration test migration/multifd: Add mapped-ram support to fd: URI migration/multifd: Support incoming mapped-ram stream format migration/multifd: Support outgoing mapped-ram stream format migration/multifd: Prepare multifd sync for mapped-ram migration migration/multifd: Add incoming QIOChannelFile support migration/multifd: Add outgoing QIOChannelFile support migration/multifd: Add a wrapper for channels_created migration/multifd: Allow receiving pages without packets migration/multifd: Allow multifd without packets migration/multifd: Decouple recv method from pages migration/multifd: Rename MultiFDSend|RecvParams::data to compress_data tests/qtest/migration: Add tests for mapped-ram file-based migration migration/ram: Add incoming 'mapped-ram' migration migration/ram: Add outgoing 'mapped-ram' migration migration: Add mapped-ram URI compatibility check migration/ram: Introduce 'mapped-ram' migration capability migration/qemu-file: add utility methods for working with seekable channels io: fsync before closing a file channel ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # migration/ram.c
2024-03-05ui/cocoa: Remove stretch_video flagAkihiko Odaki
Evaluate [normalWindow styleMask] & NSWindowStyleMaskResizable instead. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Tested-by: Rene Engel <ReneEngel80@emailn.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-ID: <20240224-cocoa-v12-10-e89f70bdda71@daynix.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-03-05ui/cocoa: Call console_select() with the BQLAkihiko Odaki
[-QemuCocoaView displayConsole:] can be called anytime so explicitly take the BQL before it calls console_select(). Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Tested-by: Rene Engel <ReneEngel80@emailn.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-ID: <20240224-cocoa-v12-9-e89f70bdda71@daynix.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-03-05ui/cocoa: Make window resizableAkihiko Odaki
The window will be resizable when zoom-to-fit is on. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Tested-by: Rene Engel <ReneEngel80@emailn.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-ID: <20240224-cocoa-v12-8-e89f70bdda71@daynix.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-03-05ui/cocoa: Remove normalWindowAkihiko Odaki
QemuCocoaView used to have fullScreenWindow but now it's gone, so we do no longer have to call the window specifically "normalWindow". Instead, refer to it with [-QemuCocoaView window]. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Tested-by: Rene Engel <ReneEngel80@emailn.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-ID: <20240224-cocoa-v12-7-e89f70bdda71@daynix.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-03-05ui/cocoa: Let the platform toggle fullscreenAkihiko Odaki
It allows making the window full screen by clicking full screen button provided by the platform (the left-top green button) and save some code. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Tested-by: Rene Engel <ReneEngel80@emailn.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-ID: <20240224-cocoa-v12-6-e89f70bdda71@daynix.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-03-05ui/cocoa: Fix pause label coordinatesAkihiko Odaki
A subview is positioned in the superview so the superview's frame should be used instead of one of the window to determine the coordinates. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Tested-by: Rene Engel <ReneEngel80@emailn.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-ID: <20240224-cocoa-v12-5-e89f70bdda71@daynix.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-03-05ui/cocoa: Scale with NSView instead of Core GraphicsAkihiko Odaki
Core Graphics is not accelerated and slow. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Tested-by: Rene Engel <ReneEngel80@emailn.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-ID: <20240224-cocoa-v12-4-e89f70bdda71@daynix.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-03-05ui/cocoa: Release specific mouse buttonsAkihiko Odaki
ui/cocoa used to release all mouse buttons when it sees NSEventTypeLeftMouseUp, NSEventTypeRightMouseUp, or NSEventTypeOtherMouseUp, but it can instead release specific one according to the delivered event. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Tested-by: Rene Engel <ReneEngel80@emailn.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-ID: <20240224-cocoa-v12-3-e89f70bdda71@daynix.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-03-05ui/cocoa: Immediately call [-QemuCocoaView handleMouseEvent:buttons:]Akihiko Odaki
Instead of using mouse_event variable to tell to handle a mouse event later, immediately call [-QemuCocoaView handleMouseEvent:buttons:]. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Rene Engel <ReneEngel80@emailn.de> Message-ID: <20240224-cocoa-v12-2-e89f70bdda71@daynix.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-03-05ui/cocoa: Split [-QemuCocoaView handleEventLocked:]Akihiko Odaki
Currently [-QemuCocoaView handleEventLocked:] parses the passed event, stores operations to be done to variables, and perform them according to the variables. This construct will be cluttered with variables and hard to read when we need more different operations for different events. Split the methods so that we can call appropriate methods depending on events instead of relying on variables. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Tested-by: Rene Engel <ReneEngel80@emailn.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-ID: <20240224-cocoa-v12-1-e89f70bdda71@daynix.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-03-05ui/cocoa: Fix window clipping on macOS 14David Parsons
macOS Sonoma changes the NSView.clipsToBounds to false by default where it was true in earlier version of macOS. This causes the window contents to be occluded by the frame at the top of the window. This fixes the issue by conditionally compiling the clipping on Sonoma to true. NSView only exposes the clipToBounds in macOS 14 and so has to be fixed via conditional compilation. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1994 Signed-off-by: David Parsons <dave@daveparsons.net> Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com> Message-ID: <20240224140620.39200-1-dave@daveparsons.net> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-03-05ui/cocoa: add zoom-interpolation display optionCarwyn Ellis
Provides a new display option, zoom-interpolation, that enables interpolation of the scaled display when zoom-to-fit is enabled. Also provides a corresponding view menu item to allow this to be toggled as required. Signed-off-by: Carwyn Ellis <carwynellis@gmail.com> Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com> Message-ID: <20231110161729.36822-2-carwynellis@gmail.com> [PMD: QAPI @zoom-interpolation since 9.0] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2024-03-05Merge tag 'pull-tcg-20240301' of https://gitlab.com/rth7680/qemu into stagingPeter Maydell
linux-user: Rewrite elf coredump tcg/aarch64: Apple does not align __int128_t in even registers accel/tcg: Fixes for page tables in mmio memory linux-user: Remove qemu_host_page_{size,mask}, HOST_PAGE_ALIGN migration: Remove qemu_host_page_size hw/tpm: Remove qemu_host_page_size softmmu: Remove qemu_host_page_{size,mask}, HOST_PAGE_ALIGN linux-user: Split and reorganize target_mmap. *-user: Deprecate and disable -p pagesize linux-user: Allow TARGET_PAGE_BITS_VARY target/alpha: Enable TARGET_PAGE_BITS_VARY for user-only target/arm: Enable TARGET_PAGE_BITS_VARY for AArch64 user-only target/ppc: Enable TARGET_PAGE_BITS_VARY for user-only linux-user: Remove pgb_dynamic alignment assertion tcg/optimize: fix uninitialized variable linux-user: Rewrite shmat # -----BEGIN PGP SIGNATURE----- # # iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmXiXxQdHHJpY2hhcmQu # aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV/H3QgApu4OgadviJuOBenT # yaGiq+iG4wTL5vVZFK8CgMtq59dJbgJSCooh7U8dn5hIhVuvOU7odUm6embt+4WZ # 0fDZIjrRvdDMM3LdLFhfdZszMNg6w2ceN9dn5iLkW3wxjRBpTzZNbxhh2Sg308+Q # oNd+MlYLijDvQP97+tlQ/PBtndLfV5FkpU74ZinWRgcpcT6oH9sP6TRlAVttefy7 # 3GsIXhDKGoDa/0Jpy86qE//3FUaVRqqcNlAIPXMf47ABQ2y2lZlwsfyty7s55sVW # KgdXdH1GiCgxIonVg4bYvovnwKVH5xHlpsJY48jQtBXR/4exPBFBpeTc422E0Sed # swpayg== # =W3pb # -----END PGP SIGNATURE----- # gpg: Signature made Fri 01 Mar 2024 23:04:52 GMT # gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F # gpg: issuer "richard.henderson@linaro.org" # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full] # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * tag 'pull-tcg-20240301' of https://gitlab.com/rth7680/qemu: (60 commits) tests/tcg: Check that shmat() does not break /proc/self/maps linux-user: Rewrite target_shmat linux-user: Add strace for shmat linux-user/loongarch64: Remove TARGET_FORCE_SHMLBA linux-user/x86_64: Handle the vsyscall page in open_self_maps_{2,4} tcg/optimize: fix uninitialized variable linux-user: Remove pgb_dynamic alignment assertion target/alpha: Enable TARGET_PAGE_BITS_VARY for user-only target/ppc: Enable TARGET_PAGE_BITS_VARY for user-only linux-user: Bound mmap_min_addr by host page size target/arm: Enable TARGET_PAGE_BITS_VARY for AArch64 user-only linux-user: Allow TARGET_PAGE_BITS_VARY accel/tcg: Disconnect TargetPageDataNode from page size cpu: Remove page_size_init *-user: Deprecate and disable -p pagesize tests/tcg: Extend file in linux-madvise.c tests/tcg: Remove run-test-mmap-* linux-user: Split out mmap_h_gt_g linux-user: Split out mmap_h_lt_g linux-user: Split out mmap_h_eq_g ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-04Merge tag 'hppa-latest-pull-request' of https://github.com/hdeller/qemu-hppa ↵Peter Maydell
into staging HPPA64 updates # -----BEGIN PGP SIGNATURE----- # # iHUEABYKAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCZeQOtQAKCRD3ErUQojoP # Xzh6AP9Gs8sJzRbR+HLlbrs3ACR7kQEVGOYuuBEJpKqkTyDbLwD/YdOjzgtTRKLd # imxaWOJaLhpvBrmFLxn3Q58K3n9u1wY= # =bnMy # -----END PGP SIGNATURE----- # gpg: Signature made Sun 03 Mar 2024 05:46:29 GMT # gpg: using EDDSA key BCE9123E1AD29F07C049BBDEF712B510A23A0F5F # gpg: Good signature from "Helge Deller <deller@gmx.de>" [unknown] # gpg: aka "Helge Deller <deller@kernel.org>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 4544 8228 2CD9 10DB EF3D 25F8 3E5F 3D04 A7A2 4603 # Subkey fingerprint: BCE9 123E 1AD2 9F07 C049 BBDE F712 B510 A23A 0F5F * tag 'hppa-latest-pull-request' of https://github.com/hdeller/qemu-hppa: roms/hppa: Add build rules for hppa-firmware pc-bios/README: Add information about hppa-firmware pc-bios/meson: Add hppa-firmware64.img blob target/hppa: Restore unwind_breg before calculating ior target: hppa: Fix unaligned double word accesses for hppa64 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-04gitlab: update FreeBSD Cirrus CI image to 13.3Daniel P. Berrangé
The 13.2 images have been deleted from gcloud Cc: qemu-stable@nongnu.org Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240304144456.3825935-3-berrange@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-04meson: detect broken clang 17 with -fzero-call-used-regsDaniel P. Berrangé
Clang 17 will segv if given -fzero-call-used-regs and optimization is enabled. Since upstream hasn't triaged the bug, distros are increasingly shipping with broken Clang. https://github.com/llvm/llvm-project/issues/75168 https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=277474 Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20240304144456.3825935-2-berrange@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-04docs/conf.py: Remove usage of distutilsThomas Huth
The macOS jobs in our CI recently started failing, complaining that the distutils module is not available anymore. And indeed, according to https://peps.python.org/pep-0632/ it's been deprecated since a while and now likely got removed in recent Python versions. Fortunately, we only use it for a version check via LooseVersion here which we don't really need anymore - according to Repology.org, these are the versions of sphinx-rtd-theme that are currently used by the various distros: centos_stream_8: 0.3.1 centos_stream_9: 0.5.1 fedora_38: 1.1.1 fedora_39: 1.2.2 freebsd: 1.0.0 haikuports_master: 1.2.1 openbsd: 1.2.2 opensuse_leap_15_5: 0.5.1 pkgsrc_current: 2.0.0 debian_11: 0.5.1 debian_12: 1.2.0 ubuntu_20_04: 0.4.3 ubuntu_22_04: 1.0.0 ubuntu_24_04: 2.0.0 So except for CentOS 8, all distros are using a newer version of sphinx-rtd-theme, and for CentOS 8 we don't support compiling with the Sphinx of the distro anymore anyway, since it's based on the Python 3.6 interpreter there. For compiling on CentOS 8, you have to use the alternative Python 3.8 interpreter which comes without Sphinx, so that needs the Sphinx installed via pip in the venv instead, and that is using a newer version, too, according to our pythondeps.toml file. Thus we can simply drop the version check now to get rid of the distutils dependency here. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Message-id: 20240304130403.129543-1-thuth@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2024-03-04migration: simplify exec migration functionsSteve Sistare
Simplify the exec migration code by using list utility functions. As a side effect, this also fixes a minor memory leak. On function return, "g_auto(GStrv) argv" frees argv and each element, which is wrong, because the function does not own the individual elements. To compensate, the code uses g_steal_pointer which NULLs argv and prevents the destructor from running, but argv is leaked. Fixes: cbab4face57b ("migration: convert exec backend ...") Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Reviewed-by: Fabiano Rosas <farosas@suse.de> Message-ID: <20240227153321.467343-4-armbru@redhat.com> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2024-03-04qapi: New strv_from_str_list()Steve Sistare
Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-ID: <20240227153321.467343-3-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2024-03-04qapi: New QAPI_LIST_LENGTH()Steve Sistare
Signed-off-by: Steve Sistare <steven.sistare@oracle.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-ID: <20240227153321.467343-2-armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Markus Armbruster <armbru@redhat.com>
2024-03-04docs/devel/writing-monitor-commands: Minor improvementsMarkus Armbruster
Avoid "JSON" when talking about the QAPI schema syntax. Capitalize QEMU. Don't claim all HMP commands live in monitor/hmp-cmds.c (this was never true). Fix punctuation and drop inappropriate "the" here and there. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-ID: <20240227115617.237875-3-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2024-03-04docs/devel/writing-monitor-commands: Repair a decade of rotMarkus Armbruster
The tutorial doesn't match reality since at least 2013. Repairing it involves fixing the following issues: * Update for commit 6d327171551 (aio / timers: Remove alarm timers): replace the broken examples. Instead of having one for returning a struct and another for returning a list of structs, do just one for the latter. This resolves the FIXME added in commit e218052f928 (aio / timers: De-document -clock) back in 2014. * Update for commit 895a2a80e0e (qapi: Use 'struct' instead of 'type' in schema). * Update for commit 3313b6124b5 (qapi: add qapi2texi script): add required documentation to the schema snippets, and drop section "Command Documentation". * Update for commit a3c45b3e629 (qapi: New special feature flag "unstable"): supply the required feature, deemphasize the x- prefix. * Update for commit dd98234c059 (qapi: introduce x-query-roms QMP command): rephrase from "add new command" to "examine existing command". * Update for commit 9492718b7c0 (qapi misc: Elide redundant has_FOO in generated C): hello-world's message argument no longer comes with a has_message, add a second argument that does. * Update for moved and renamed files. While there, update QMP version output to current output. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-ID: <20240227115617.237875-2-armbru@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> [Whitespace tidied up, typo fixed]
2024-03-04qapi: Reject "Returns" section when command doesn't return anythingMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-ID: <20240227113921.236097-14-armbru@redhat.com>
2024-03-04qga/qapi-schema: Fix guest-set-memory-blocks documentationMarkus Armbruster
Documentation claims the command can "return NULL". "NULL" doesn't exist in JSON. "null" does, but the command returns lists, and null isn't. Correct documentation to "return an empty list". Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-ID: <20240227113921.236097-13-armbru@redhat.com>
2024-03-04qga/qapi-schema: Tweak documentation of fsfreeze commandsMarkus Armbruster
"Returns:" sections of guest-fsfreeze-freeze and guest-fsfreeze-freeze-list describe both command behavior and success response. Move behavior out, so "Returns:" is only about success response. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-ID: <20240227113921.236097-12-armbru@redhat.com>
2024-03-04qga/qapi-schema: Clean up "Returns" sectionsMarkus Armbruster
Drop "on success" where it is redundant with "Returns:". Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-ID: <20240227113921.236097-11-armbru@redhat.com>
2024-03-04qga/qapi-schema: Delete useless "Returns" sectionsMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-ID: <20240227113921.236097-10-armbru@redhat.com>
2024-03-04qga/qapi-schema: Move error documentation to new "Errors" sectionsMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-ID: <20240227113921.236097-9-armbru@redhat.com>
2024-03-04qapi/yank: Tweak @yank's error description for consistencyMarkus Armbruster
Phrase it like "If <condition>, <error>", like we do elsewhere. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-ID: <20240227113921.236097-8-armbru@redhat.com>
2024-03-04qapi: Clean up "Returns" sectionsMarkus Armbruster
Drop list markup, since there's just one item left. Drop "on success" where it is redundant with "Returns:". Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-ID: <20240227113921.236097-7-armbru@redhat.com>
2024-03-04qapi: Delete useless "Returns" sectionsMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-ID: <20240227113921.236097-6-armbru@redhat.com>
2024-03-04qapi: Move error documentation to new "Errors" sectionsMarkus Armbruster
Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-ID: <20240227113921.236097-5-armbru@redhat.com>
2024-03-04qapi: New documentation section tag "Errors"Markus Armbruster
We use section "Returns" for documenting both success and error response of commands. I intend to generate better command success response documentation. Easier when "Returns" documents just he success response. Create new section tag "Errors". The next two commits will move error response documentation from "Returns" sections to "Errors" sections. Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-ID: <20240227113921.236097-4-armbru@redhat.com>
2024-03-04qapi: Slightly clearer error message for invalid "Returns" sectionMarkus Armbruster
Change "'Returns:' is only valid for commands" to "'Returns' section is only valid for commands". Signed-off-by: Markus Armbruster <armbru@redhat.com> Message-ID: <20240227113921.236097-3-armbru@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-18 02:58:20 +0000