aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-09-05qemu-iotests: test backup compression in 055Pavel Butsykin
Added cases to check the backup compression out of qcow2, raw in qcow2 on drive-backup and blockdev-backup. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Jeff Cody <jcody@redhat.com> CC: Markus Armbruster <armbru@redhat.com> CC: Eric Blake <eblake@redhat.com> CC: John Snow <jsnow@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-05blockdev-backup: added support for data compressionPavel Butsykin
The idea is simple - backup is "written-once" data. It is written block by block and it is large enough. It would be nice to save storage space and compress it. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Jeff Cody <jcody@redhat.com> CC: Markus Armbruster <armbru@redhat.com> CC: Eric Blake <eblake@redhat.com> CC: John Snow <jsnow@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-05drive-backup: added support for data compressionPavel Butsykin
The idea is simple - backup is "written-once" data. It is written block by block and it is large enough. It would be nice to save storage space and compress it. The patch adds a flag to the qmp/hmp drive-backup command which enables block compression. Compression should be implemented in the format driver to enable this feature. There are some limitations of the format driver to allow compressed writes. We can write data only once. Though for backup this is perfectly fine. These limitations are maintained by the driver and the error will be reported if we are doing something wrong. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Jeff Cody <jcody@redhat.com> CC: Markus Armbruster <armbru@redhat.com> CC: Eric Blake <eblake@redhat.com> CC: John Snow <jsnow@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-05block: simplify blockdev-backupPavel Butsykin
Now that we can support boxed commands, use it to greatly reduce the number of parameters (and likelihood of getting out of sync) when adjusting blockdev-backup parameters. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Jeff Cody <jcody@redhat.com> CC: Markus Armbruster <armbru@redhat.com> CC: Eric Blake <eblake@redhat.com> CC: John Snow <jsnow@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-05block: simplify drive-backupPavel Butsykin
Now that we can support boxed commands, use it to greatly reduce the number of parameters (and likelihood of getting out of sync) when adjusting drive-backup parameters. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Jeff Cody <jcody@redhat.com> CC: Markus Armbruster <armbru@redhat.com> CC: Eric Blake <eblake@redhat.com> CC: John Snow <jsnow@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-05block/io: turn on dirty_bitmaps for the compressed writesPavel Butsykin
Previously was added the assert: commit 1755da16e32c15b22a521e8a38539e4b5cf367f3 Author: Paolo Bonzini <pbonzini@redhat.com> Date: Thu Oct 18 16:49:18 2012 +0200 block: introduce new dirty bitmap functionality Now the compressed write is always in coroutine and setting the bits is done after the write, so that we can return the dirty_bitmaps for the compressed writes. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Jeff Cody <jcody@redhat.com> CC: Markus Armbruster <armbru@redhat.com> CC: Eric Blake <eblake@redhat.com> CC: John Snow <jsnow@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-05block: remove BlockDriver.bdrv_write_compressedPavel Butsykin
There are no block drivers left that implement the old .bdrv_write_compressed interface, so it can be removed. Also now we have no need to use the bdrv_pwrite_compressed function and we can remove it entirely. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Jeff Cody <jcody@redhat.com> CC: Markus Armbruster <armbru@redhat.com> CC: Eric Blake <eblake@redhat.com> CC: John Snow <jsnow@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-05qcow: cleanup qcow_co_pwritev_compressed to avoid the recursionPavel Butsykin
Now that the function uses a vector instead of a buffer, there is no need to use recursive code. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Jeff Cody <jcody@redhat.com> CC: Markus Armbruster <armbru@redhat.com> CC: Eric Blake <eblake@redhat.com> CC: John Snow <jsnow@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-05qcow: add qcow_co_pwritev_compressedPavel Butsykin
Added implementation of the qcow_co_pwritev_compressed function that will allow us to safely use compressed writes for the qcow from running VMs. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Jeff Cody <jcody@redhat.com> CC: Markus Armbruster <armbru@redhat.com> CC: Eric Blake <eblake@redhat.com> CC: John Snow <jsnow@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-05vmdk: add vmdk_co_pwritev_compressedPavel Butsykin
Added implementation of the vmdk_co_pwritev_compressed function that will allow us to safely use compressed writes for the vmdk from running VMs. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Jeff Cody <jcody@redhat.com> CC: Markus Armbruster <armbru@redhat.com> CC: Eric Blake <eblake@redhat.com> CC: John Snow <jsnow@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-05qcow2: cleanup qcow2_co_pwritev_compressed to avoid the recursionPavel Butsykin
Now that the function uses a vector instead of a buffer, there is no need to use recursive code. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Jeff Cody <jcody@redhat.com> CC: Markus Armbruster <armbru@redhat.com> CC: Eric Blake <eblake@redhat.com> CC: John Snow <jsnow@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-05qcow2: add qcow2_co_pwritev_compressedPavel Butsykin
Added implementation of the qcow2_co_pwritev_compressed function that will allow us to safely use compressed writes for the qcow2 from running VMs. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Jeff Cody <jcody@redhat.com> CC: Markus Armbruster <armbru@redhat.com> CC: Eric Blake <eblake@redhat.com> CC: John Snow <jsnow@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-05block/io: reuse bdrv_co_pwritev() for write compressedPavel Butsykin
For bdrv_pwrite_compressed() it looks like most of the code creating coroutine is duplicated in bdrv_prwv_co(). So we can just add a flag (BDRV_REQ_WRITE_COMPRESSED) and use bdrv_prwv_co() as a generic one. In the end we get coroutine oriented function for write compressed by using bdrv_co_pwritev/blk_co_pwritev with BDRV_REQ_WRITE_COMPRESSED flag. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Jeff Cody <jcody@redhat.com> CC: Markus Armbruster <armbru@redhat.com> CC: Eric Blake <eblake@redhat.com> CC: John Snow <jsnow@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-05block: Convert bdrv_pwrite_compressed() to BdrvChildPavel Butsykin
Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Signed-off-by: Denis V. Lunev <den@openvz.org> Reviewed-by: Eric Blake <eblake@redhat.com> CC: Jeff Cody <jcody@redhat.com> CC: Markus Armbruster <armbru@redhat.com> CC: Eric Blake <eblake@redhat.com> CC: John Snow <jsnow@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-05block: switch blk_write_compressed() to byte-based interfacePavel Butsykin
This is a preparatory patch, which continues the general trend of the transition to the byte-based interfaces. bdrv_check_request() and blk_check_request() are no longer used, thus we can remove them. Signed-off-by: Pavel Butsykin <pbutsykin@virtuozzo.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Denis V. Lunev <den@openvz.org> CC: Jeff Cody <jcody@redhat.com> CC: Markus Armbruster <armbru@redhat.com> CC: Eric Blake <eblake@redhat.com> CC: John Snow <jsnow@redhat.com> CC: Stefan Hajnoczi <stefanha@redhat.com> CC: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-09-05nbd-server: Allow node name for nbd-server-addKevin Wolf
There is no reason why an NBD server couldn't be started for any node, even if it's not on the top level. This converts nbd-server-add to accept a node-name. Note that there is a semantic difference between using a BlockBackend name and the node name of its root: In the former case, the NBD server is closed on eject; in the latter case, the NBD server doesn't drop its reference and keeps the image file open this way. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-09-05nbd-server: Use a separate BlockBackendKevin Wolf
The builtin NBD server uses its own BlockBackend now instead of reusing the monitor/guest device one. This means that it has its own writethrough setting now. The builtin NBD server always uses writeback caching now regardless of whether the guest device has WCE enabled. qemu-nbd respects the cache mode given on the command line. We still need to keep a reference to the monitor BB because we put an eject notifier on it, but we don't use it for any I/O. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-09-05block: Accept node-name for drive-mirrorKevin Wolf
In order to remove the necessity to use BlockBackend names in the external API, we want to allow node-names everywhere. This converts drive-mirror to accept a node-name without lifting the restriction that we're operating at a root node. In case of an invalid device name, the command returns the GenericError error class now instead of DeviceNotFound, because this is what qmp_get_root_bs() returns. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-09-05block: Accept node-name for drive-backupKevin Wolf
In order to remove the necessity to use BlockBackend names in the external API, we want to allow node-names everywhere. This converts drive-backup and the corresponding transaction action to accept a node-name without lifting the restriction that we're operating at a root node. In case of an invalid device name, the command returns the GenericError error class now instead of DeviceNotFound, because this is what qmp_get_root_bs() returns. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-09-05block: Accept node-name for change-backing-fileKevin Wolf
In order to remove the necessity to use BlockBackend names in the external API, we want to allow node-names everywhere. This converts change-backing-file to accept a node-name without lifting the restriction that we're operating at a root node. In case of an invalid device name, the command returns the GenericError error class now instead of DeviceNotFound, because this is what qmp_get_root_bs() returns. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-09-05block: Accept node-name for blockdev-snapshot-internal-syncKevin Wolf
In order to remove the necessity to use BlockBackend names in the external API, we want to allow node-names everywhere. This converts blockdev-snapshot-internal-sync to accept a node-name without lifting the restriction that we're operating at a root node. In case of an invalid device name, the command returns the GenericError error class now instead of DeviceNotFound, because this is what qmp_get_root_bs() returns. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-09-05block: Accept node-name for blockdev-snapshot-delete-internal-syncKevin Wolf
In order to remove the necessity to use BlockBackend names in the external API, we want to allow node-names everywhere. This converts blockdev-snapshot-delete-internal-sync to accept a node-name without lifting the restriction that we're operating at a root node. In case of an invalid device name, the command returns the GenericError error class now instead of DeviceNotFound, because this is what qmp_get_root_bs() returns. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-09-05block: Accept node-name for blockdev-mirrorKevin Wolf
In order to remove the necessity to use BlockBackend names in the external API, we want to allow node-names everywhere. This converts blockdev-mirror to accept a node-name without lifting the restriction that we're operating at a root node. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-09-05block: Accept node-name for blockdev-backupKevin Wolf
In order to remove the necessity to use BlockBackend names in the external API, we want to allow node-names everywhere. This converts blockdev-backup and the corresponding transaction action to accept a node-name without lifting the restriction that we're operating at a root node. In case of an invalid device name, the command returns the GenericError error class now instead of DeviceNotFound, because this is what qmp_get_root_bs() returns. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-09-05block: Accept node-name for block-commitKevin Wolf
In order to remove the necessity to use BlockBackend names in the external API, we want to allow node-names everywhere. This converts block-commit to accept a node-name without lifting the restriction that we're operating at a root node. As libvirt makes use of the DeviceNotFound error class, we must add explicit code to retain this behaviour because qmp_get_root_bs() only returns GenericErrors. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com>
2016-09-05block: Accept node-name for block-streamKevin Wolf
In order to remove the necessity to use BlockBackend names in the external API, we want to allow node-names everywhere. This converts block-stream to accept a node-name without lifting the restriction that we're operating at a root node. In case of an invalid device name, the command returns the GenericError error class now instead of DeviceNotFound, because this is what qmp_get_root_bs() returns. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Alberto Garcia <berto@igalia.com>
2016-09-05scsi: scsi-cd without drive property for empty driveKevin Wolf
This allows the creation of an empty scsi-cd device without manually creating a BlockBackend. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-09-05ide: ide-cd without drive property for empty driveKevin Wolf
This allows the creation of an empty ide-cd device without manually creating a BlockBackend. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Acked-by: Eric Blake <eblake@redhat.com>
2016-09-05Open 2.8 development treePeter Maydell
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-09-02Update version for v2.7.0 releasev2.7.0Peter Maydell
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-08-30Update version for v2.7.0-rc5 releasev2.7.0-rc5Peter Maydell
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-08-309pfs: handle walk of ".." in the root directoryGreg Kurz
The 9P spec at http://man.cat-v.org/plan_9/5/intro says: All directories must support walks to the directory .. (dot-dot) meaning parent directory, although by convention directories contain no explicit entry for .. or . (dot). The parent of the root directory of a server's tree is itself. This means that a client cannot walk further than the root directory exported by the server. In other words, if the client wants to walk "/.." or "/foo/../..", the server should answer like the request was to walk "/". This patch just does that: - we cache the QID of the root directory at attach time - during the walk we compare the QID of each path component with the root QID to detect if we're in a "/.." situation - if so, we skip the current component and go to the next one Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-08-309pfs: forbid . and .. in file namesGreg Kurz
According to the 9P spec http://man.cat-v.org/plan_9/5/open about the create request: The names . and .. are special; it is illegal to create files with these names. This patch causes the create and lcreate requests to fail with EINVAL if the file name is either "." or "..". Even if it isn't explicitly written in the spec, this patch extends the checking to all requests that may cause a directory entry to be created: - mknod - rename - renameat - mkdir - link - symlink The unlinkat request also gets patched for consistency (even if rmdir("foo/..") is expected to fail according to POSIX.1-2001). The various error values come from the linux manual pages. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-08-309pfs: forbid illegal path namesGreg Kurz
Empty path components don't make sense for most commands and may cause undefined behavior, depending on the backend. Also, the walk request described in the 9P spec [1] clearly shows that the client is supposed to send individual path components: the official linux client never sends portions of path containing the / character for example. Moreover, the 9P spec [2] also states that a system can decide to restrict the set of supported characters used in path components, with an explicit mention "to remove slashes from name components". This patch introduces a new name_is_illegal() helper that checks the names sent by the client are not empty and don't contain unwanted chars. Since 9pfs is only supported on linux hosts, only the / character is checked at the moment. When support for other hosts (AKA. win32) is added, other chars may need to be blacklisted as well. If a client sends an illegal path component, the request will fail and ENOENT is returned to the client. [1] http://man.cat-v.org/plan_9/5/walk [2] http://man.cat-v.org/plan_9/5/intro Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-08-30Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* pc-bios/optionrom/Makefile fix for -O0 * revert socket_connect change # gpg: Signature made Tue 30 Aug 2016 15:36:59 BST # gpg: using RSA key 0xBFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: optionrom: cope with multiple -O options Revert "Change net/socket.c to use socket_*() functions" Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-08-30optionrom: cope with multiple -O optionsPaolo Bonzini
Reproducer: CFLAGS="-g3 -O0" ./configure --target-list=aarch64-softmmu,arm-softmmu --enable-vhost-net --enable-virtfs Here CFLAGS ends up with "-O2 -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 ... -g3 -O0" and pc-bios/optionrom/Makefile forgets to add the -O2 it needs. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-08-30Revert "Change net/socket.c to use socket_*() functions"Paolo Bonzini
Since commit 7e8449594c929, the socket connect code is blocking, because calling socket_connect() without callback is blocking. This reverts the commit. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2016-08-30translate: early exit in tb_flush if there is no tcgChristian Borntraeger
tb_flush does all kind of things, which are very tcg specific. As it is called from some places even for KVM (e.g. gdb server) it is better to detect these cases and do an early exit. This also fixes a crash in the gdb server that was triggered by commit 909eaac9bbc2 ("tb hash: track translated blocks with qht"). Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Reported-by: Richard Henderson <rth@twiddle.net> Reported-by: Brent Baccala <cosine@freesoft.org> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Message-id: 1472148686-39841-1-git-send-email-borntraeger@de.ibm.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-08-30ui: fix refresh of VNC server surfaceDaniel P. Berrange
In previous commit commit c7628bff4138ce906a3620d12e0820c1cf6c140d Author: Gerd Hoffmann <kraxel@redhat.com> Date: Fri Oct 30 12:10:09 2015 +0100 vnc: only alloc server surface with clients connected the VNC server was changed so that the 'vd->server' pixman image was only allocated when a client is connected. Since then if a client disconnects and then reconnects to the VNC server all they will see is a black screen until they do something that triggers a refresh. On a graphical desktop this is not often noticed since there's many things going on which cause a refresh. On a plain text console it is really obvious since nothing refreshes frequently. The problem is that the VNC server didn't update the guest dirty bitmap, so still believes its server image is in sync with the guest contents. To fix this we must explicitly mark the entire guest desktop as dirty after re-creating the server surface. Move this logic into vnc_update_server_surface() so it is guaranteed to be call in all code paths that re-create the surface instead of only in vnc_dpy_switch() Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Peter Lieven <pl@kamp.de> Tested-by: Peter Lieven <pl@kamp.de> Message-id: 1471365032-18096-1-git-send-email-berrange@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-08-24Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
virtio: fixes some bugfixes for virtio balloon is still broken wrt migration Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Tue 23 Aug 2016 17:33:11 BST # gpg: using RSA key 0x281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * remotes/mst/tags/for_upstream: virtio: decrement vq->inuse in virtqueue_discard() virtio: recalculate vq->inuse after migration Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-08-24Fix bsd-user build after d915b7bbEd Maste
Must include "qemu-version.h" for the QEMU_PKGVERSION definition. Signed-off-by: Ed Maste <emaste@freebsd.org> Message-id: 1471877833-52343-1-git-send-email-emaste@freebsd.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-08-23virtio: decrement vq->inuse in virtqueue_discard()Stefan Hajnoczi
virtqueue_discard() moves vq->last_avail_idx back so the element can be popped again. It's necessary to decrement vq->inuse to avoid "leaking" the element count. Cc: qemu-stable@nongnu.org Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-08-23virtio: recalculate vq->inuse after migrationStefan Hajnoczi
The vq->inuse field is not migrated. Many devices don't hold VirtQueueElements across migration so it doesn't matter that vq->inuse starts at 0 on the destination QEMU. At least virtio-serial, virtio-blk, and virtio-balloon migrate while holding VirtQueueElements. For these devices we need to recalculate vq->inuse upon load so the value is correct. Cc: qemu-stable@nongnu.org Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2016-08-22Update version for v2.7.0-rc4 releasev2.7.0-rc4Peter Maydell
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-08-22Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into ↵Peter Maydell
staging # gpg: Signature made Mon 22 Aug 2016 09:06:32 BST # gpg: using RSA key 0xEF04965B398D6211 # gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211 * remotes/jasowang/tags/net-pull-request: e1000e: remove internal interrupt flag slirp: fix segv when init failed Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-08-22e1000e: remove internal interrupt flagCao jin
Commit 66bf7d58 removed internal msi state flag E1000E_USE_MSI, E1000E_USE_MSIX is not necessary too, remove it now. And interrupt flag field intr_state also can be removed now. CC: Dmitry Fleytman <dmitry@daynix.com> CC: Jason Wang <jasowang@redhat.com> CC: Markus Armbruster <armbru@redhat.com> CC: Marcel Apfelbaum <marcel@redhat.com> CC: Michael S. Tsirkin <mst@redhat.com> CC: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Cao jin <caoj.fnst@cn.fujitsu.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Acked-by: Dmitry Fleytman <dmitry@daynix.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-08-22slirp: fix segv when init failedMarc-André Lureau
Since commit f6c2e66ae8c8a, slirp uses an exit notifier to call slirp_smb_cleanup. However, if init() failed, the notifier isn't added, and removing it will fail: ==18447== Invalid write of size 8 ==18447== at 0x7EF2B5: notifier_remove (notify.c:32) ==18447== by 0x48E80C: qemu_remove_exit_notifier (vl.c:2661) ==18447== by 0x6A2187: net_slirp_cleanup (slirp.c:134) ==18447== by 0x69419D: qemu_cleanup_net_client (net.c:338) ==18447== by 0x69445B: qemu_del_net_client (net.c:401) ==18447== by 0x6A2B81: net_slirp_init (slirp.c:366) ==18447== by 0x6A4241: net_init_slirp (slirp.c:865) ==18447== by 0x695C6D: net_client_init1 (net.c:1051) ==18447== by 0x695F6E: net_client_init (net.c:1108) ==18447== by 0x696DBA: net_init_netdev (net.c:1498) ==18447== by 0x7F1F99: qemu_opts_foreach (qemu-option.c:1116) ==18447== by 0x696E60: net_init_clients (net.c:1516) ==18447== Address 0x0 is not stack'd, malloc'd or (recently) free'd Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2016-08-19test-logging: don't hard-code paths in /tmpSascha Silbe
Since f6880b7f [qemu-log: support simple pid substitution for logs], test-logging creates files with hard-coded names in /tmp. In the best case, this prevents multiple developers from running "make check" on the same machine. In the worst case, it allows for symlink attacks, enabling an attacker to overwrite files that are writable to the developer running "make check". Instead of hard-coding the paths, create a temporary directory using g_dir_make_tmp() and clean it up afterwards. Fixes: f6880b7f ("qemu-log: support simple pid substitution for logs") Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Message-id: 1471545963-11720-3-git-send-email-silbe@linux.vnet.ibm.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-08-19glib: add compatibility implementation for g_dir_make_tmp()Sascha Silbe
We're going to make use of g_dir_make_tmp() in test-logging. Provide a compatibility implementation of it for glib < 2.30. May behave differently in some edge cases (e.g. pattern only at the end of the template, the file name is not part of the error message), but good enough in practice. Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com> Message-id: 1471545963-11720-2-git-send-email-silbe@linux.vnet.ibm.com [PMM: removed variable "template" which caused compilation failures when C++ files include glib-compat.h] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-08-19syscall.c: Redefine IFLA_* enumsMichal Privoznik
In 9c37146782 I've tried to fix a broken build with older linux-headers. However, I didn't do it properly. The solution implemented here is to grab the enums that caused the problem initially, and rename their values so that they are "QEMU_" prefixed. In order to guarantee matching values with actual enums from linux-headers, the enums are seeded with starting values from the original enums. Signed-off-by: Michal Privoznik <mprivozn@redhat.com> Reviewed-by: Laurent Vivier <laurent@vivier.eu> Message-id: 75c14d6e8a97c4ff3931d69c13eab7376968d8b4.1471593869.git.mprivozn@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-04 09:02:35 +0000