aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-06-30python: Re-lock pipenv at *oldest* supported versionsJohn Snow
tox is already testing the most recent versions. Let's use pipenv to test the oldest versions we claim to support. This matches the stylistic choice to have pipenv always test our oldest supported Python version, 3.6. The effect of this is that the python-check-pipenv CI job on gitlab will now test against much older versions of these linters, which will help highlight incompatible changes that might otherwise go unnoticed. Update instructions for adding and bumping versions in setup.cfg. The reason for deleting the line that gets added to Pipfile is largely just to avoid having the version minimums specified in multiple places in config checked into the tree. (This patch was written by deleting Pipfile and Pipfile.lock, then explicitly installing each dependency manually at a specific version. Then, I restored the prior Pipfile and re-ran `pipenv lock --dev --keep-outdated` to re-add the qemu dependency back to the pipenv environment while keeping the "old" packages. It's annoying, yes, but I think the improvement to test coverage is worthwhile.) Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Willian Rampazzo <willianr@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-id: 20210629214323.1329806-5-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-30python: Remove global pylint suppressionsJohn Snow
These suppressions only apply to a small handful of places. Instead of disabling them globally, disable them just in the cases where we need. The design of the machine class grew quite organically with tons of constructor and class instance variables -- there's little chance of meaningfully refactoring it in the near term, so just suppress the warnings for that class. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Willian Rampazzo <willianr@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-id: 20210629214323.1329806-4-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-30python: expose typing information via PEP 561John Snow
https://www.python.org/dev/peps/pep-0561/#specification Create 'py.typed' files in each subpackage that indicate to mypy that this is a typed module, so that users of any of these packages can use mypy to check their code as well. Note: Theoretically it's possible to ditch MANIFEST.in in favor of using package_data in setup.cfg, but I genuinely could not figure out how to get it to include things from the *source root* into the *package root*; only how to include things from each subpackage. I tried! Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Willian Rampazzo <willianr@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-id: 20210629214323.1329806-3-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-30python/qom: Do not use 'err' name at module scopeJohn Snow
Pylint updated to 2.9.0 upstream, adding new warnings for things that re-use the 'err' variable. Luckily, this only breaks the python-check-tox job, which is allowed to fail as a warning. Signed-off-by: John Snow <jsnow@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Reviewed-by: Willian Rampazzo <willianr@redhat.com> Message-id: 20210629214323.1329806-2-jsnow@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-30Merge remote-tracking branch 'remotes/quic/tags/pull-hex-20210629' into stagingPeter Maydell
Fixes for bugs found by inspection and internal testing Tests added to tests/tcg/hexagon/misc.c # gpg: Signature made Tue 29 Jun 2021 17:50:16 BST # gpg: using RSA key 7B0244FB12DE4422 # gpg: Good signature from "Taylor Simpson (Rock on) <tsimpson@quicinc.com>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 3635 C788 CE62 B91F D4C5 9AB4 7B02 44FB 12DE 4422 * remotes/quic/tags/pull-hex-20210629: Hexagon (target/hexagon) remove unused TCG variables Hexagon (target/hexagon) cleanup gen_store_conditional[48] functions Hexagon (target/hexagon) fix l2fetch instructions Hexagon (target/hexagon) fix bug in fLSBNEW* Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-06-29Hexagon (target/hexagon) remove unused TCG variablesTaylor Simpson
Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1622589584-22571-5-git-send-email-tsimpson@quicinc.com>
2021-06-29Hexagon (target/hexagon) cleanup gen_store_conditional[48] functionsTaylor Simpson
Previously the store-conditional code was writing to hex_pred[prednum]. Then, the fGEN_TCG override was reading from there to the destination variable so that the packet commit logic would handle it properly. The correct implementation is to write to the destination variable and don't have the extra read in the override. Remove the unused arguments from gen_store_conditional[48] Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1622589584-22571-4-git-send-email-tsimpson@quicinc.com>
2021-06-29Hexagon (target/hexagon) fix l2fetch instructionsTaylor Simpson
Y4_l2fetch == l2fetch(Rs32, Rt32) Y5_l2fetch == l2fetch(Rs32, Rtt32) The semantics for these instructions are present, but the encodings are missing. Note that these are treated as nops in qemu, so we add overrides. Test case added to tests/tcg/hexagon/misc.c Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1622589584-22571-3-git-send-email-tsimpson@quicinc.com>
2021-06-29Hexagon (target/hexagon) fix bug in fLSBNEW*Taylor Simpson
Change fLSBNEW/fLSBNEW0/fLSBNEW1 from copy to "x & 1" Remove gen_logical_not function Clean up fLSBNEWNOT to use andi-1 followed by xori-1 Test cases added to tests/tcg/hexagon/misc.c Signed-off-by: Taylor Simpson <tsimpson@quicinc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <1622589584-22571-2-git-send-email-tsimpson@quicinc.com>
2021-06-29Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-axp-20210628' ↵Peter Maydell
into staging Fixes for NetBSD/alpha: - Provide a proper PCI-ISA bridge - Set PCI device IDs correctly - Pass -nographic flag to PALcode - Update PALcode to set up the Console Terminal Block - Honor the Floating-point ENable bit during translate. # gpg: Signature made Mon 28 Jun 2021 15:34:08 BST # gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F # gpg: issuer "richard.henderson@linaro.org" # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full] # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * remotes/rth-gitlab/tags/pull-axp-20210628: target/alpha: Honor the FEN bit pc-bios: Update the palcode-clipper image hw/alpha: Provide a PCI-ISA bridge device node hw/alpha: Provide console information to the PALcode at start-up hw/alpha: Set minimum PCI device ID to 1 to match Clipper IRQ mappings Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-06-28Merge remote-tracking branch 'remotes/bonzini-gitlab/tags/for-upstream' into ↵Peter Maydell
staging * Some Meson test conversions * KVM dirty page ring buffer fix * KVM TSC scaling support * Fixes for SG_IO with /dev/sdX devices * (Non)support for host devices on iOS * -smp cleanups # gpg: Signature made Fri 25 Jun 2021 15:16:18 BST # gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83 # gpg: issuer "pbonzini@redhat.com" # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full] # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full] # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini-gitlab/tags/for-upstream: (28 commits) machine: reject -smp dies!=1 for non-PC machines machine: pass QAPI struct to mc->smp_parse machine: add error propagation to mc->smp_parse machine: move common smp_parse code to caller machine: move dies from X86MachineState to CpuTopology file-posix: handle EINTR during ioctl block: detect DKIOCGETBLOCKCOUNT/SIZE before use block: try BSD disk size ioctls one after another block: check for sys/disk.h block: feature detection for host block support file-posix: try BLKSECTGET on block devices too, do not round to power of 2 block: add max_hw_transfer to BlockLimits block-backend: align max_transfer to request alignment osdep: provide ROUND_DOWN macro scsi-generic: pass max_segments via max_iov field in BlockLimits file-posix: fix max_iov for /dev/sg devices KVM: Fix dirty ring mmap incorrect size due to renaming accident configure, meson: convert libusbredir detection to meson configure, meson: convert libcacard detection to meson configure, meson: convert libusb detection to meson ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-06-28Merge remote-tracking branch 'remotes/vsementsov/tags/pull-jobs-2021-06-25' ↵Peter Maydell
into staging block: Make block-copy API thread-safe # gpg: Signature made Fri 25 Jun 2021 13:40:24 BST # gpg: using RSA key 8B9C26CDB2FD147C880E86A1561F24C1F19F79FB # gpg: Good signature from "Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 8B9C 26CD B2FD 147C 880E 86A1 561F 24C1 F19F 79FB * remotes/vsementsov/tags/pull-jobs-2021-06-25: block-copy: atomic .cancelled and .finished fields in BlockCopyCallState block-copy: add CoMutex lock block-copy: move progress_set_remaining in block_copy_task_end block-copy: streamline choice of copy_range vs. read/write block-copy: small refactor in block_copy_task_entry and block_copy_common co-shared-resource: protect with a mutex progressmeter: protect with a mutex blockjob: let ratelimit handle a speed of 0 block-copy: let ratelimit handle a speed of 0 ratelimit: treat zero speed as unlimited Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-06-28target/alpha: Honor the FEN bitRichard Henderson
This bit is used by NetBSD for lazy fpu migration. Tested-by: Jason Thorpe <thorpej@me.com> Reported-by: Jason Thorpe <thorpej@me.com> Resolves: https://gitlab.com/qemu-project/qemu/-/issues/438 Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-06-28pc-bios: Update the palcode-clipper imageRichard Henderson
Build a new palcode image with Jason Thorpe's patches to support NetBSD. Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-06-28hw/alpha: Provide a PCI-ISA bridge device nodeJason Thorpe
- Move initialization of the ISA bus from typhoon_init() to clipper_init(); this apsect of device topology is really associated with the individual model, not the core logic chipset. typhoon_init() now returns the IRQ to use for the output of the ISA PIC. - In clipper_init(), instantiate an i82378 instance, and connect its PIC output to the ISA IRQ input provided by typhoon_init(). Remove the explicit instantiations of i8254 and i82374, as these devices are subsumed by the i82378. Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Jason Thorpe <thorpej@me.com> Message-Id: <20210616141538.25436-1-thorpej@me.com> [rth: Remove direct dependencies on i82374, i8254, i8259.] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-06-28hw/alpha: Provide console information to the PALcode at start-upJason Thorpe
Redefine the a2 register passed by Qemu at start-up to also include some configuration flags, in addition to the CPU count, and define a flag to mirror the "-nographic" option. Signed-off-by: Jason Thorpe <thorpej@me.com> Message-Id: <20210613211549.18094-5-thorpej@me.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-06-28hw/alpha: Set minimum PCI device ID to 1 to match Clipper IRQ mappingsJason Thorpe
Since we are emulating a Clipper device topology, we need to set the minimum PCI device ID to 1, as there is no IRQ mapping for a device at ID 0 (see sys_dp264.c:clipper_map_irq()). - Add a 'devfn_min' argument to typhoon_init(). Pass that argument along to pci_register_root_bus(). - In clipper_init(), pass PCI_DEVFN(1, 0) as the minimum PCI device ID/function. Signed-off-by: Jason Thorpe <thorpej@me.com> Message-Id: <20210613211549.18094-3-thorpej@me.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2021-06-28Merge remote-tracking branch 'remotes/jsnow-gitlab/tags/floppy-pull-request' ↵Peter Maydell
into staging FDC Pull request # gpg: Signature made Fri 25 Jun 2021 13:54:17 BST # gpg: using RSA key F9B7ABDBBCACDF95BE76CBD07DEF8106AAFC390E # gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" [full] # Primary key fingerprint: FAEB 9711 A12C F475 812F 18F2 88A9 064D 1835 61EB # Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76 CBD0 7DEF 8106 AAFC 390E * remotes/jsnow-gitlab/tags/floppy-pull-request: hw/block/fdc: Add description to floppy controllers hw/block/fdc: Extract SysBus floppy controllers to fdc-sysbus.c hw/block/fdc: Extract ISA floppy controllers to fdc-isa.c hw/block/fdc: Declare shared prototypes in fdc-internal.h hw/block/fdc: Replace disabled fprintf() by trace event hw/isa/Kconfig: Fix missing dependency ISA_SUPERIO -> FDC Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-06-28Merge remote-tracking branch 'remotes/philmd/tags/mips-20210625' into stagingPeter Maydell
MIPS patches queue Various fixes: - Potential integer overflow (CID 1452921) - Invalid emulation of nanoMIPS BPOSGE32 opcode - Missing exception when DINSV opcode used with DSP disabled - Do not abort but emit exception for invalid BRANCH opcodes - TCG temporary leaks Housekeeping: - Remove dead code / comments - Restrict few files to TCG, declarations to sysemu - Merge MSA32 and MSA64 decodetree definitions # gpg: Signature made Fri 25 Jun 2021 10:22:20 BST # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * remotes/philmd/tags/mips-20210625: target/mips: Merge msa32/msa64 decodetree definitions target/mips: Remove pointless gen_msa() target/mips: Optimize regnames[] arrays target/mips: Constify host_to_mips_errno[] target/mips: fix emulation of nanoMIPS BPOSGE32 instruction target/mips: Remove microMIPS BPOSGE32 / BPOSGE64 unuseful cases target/mips: Remove SmartMIPS / MDMX unuseful comments target/mips: Restrict some system specific declarations to sysemu target/mips: Move translate.h to tcg/ sub directory target/mips: Move TCG trace events to tcg/ sub directory target/mips: Do not abort on invalid instruction target/mips: Raise exception when DINSV opcode used with DSP disabled target/mips: Fix more TCG temporary leaks in gen_pool32a5_nanomips_insn target/mips: Fix TCG temporary leaks in gen_pool32a5_nanomips_insn() target/mips: Fix potential integer overflow (CID 1452921) Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-06-25Merge remote-tracking branch ↵Peter Maydell
'remotes/kraxel/tags/audio-20210624-pull-request' into staging audio: bugfixes # gpg: Signature made Thu 24 Jun 2021 13:16:16 BST # gpg: using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/audio-20210624-pull-request: hw/audio/sb16: Restrict I/O sampling rate range for command 41h/42h coreaudio: Lock only the buffer Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-06-25Merge remote-tracking branch ↵Peter Maydell
'remotes/alistair/tags/pull-riscv-to-apply-20210624-2' into staging Third RISC-V PR for 6.1 release - Fix MISA in the DisasContext - Fix GDB CSR XML generation - QOMify the SiFive UART - Add support for the OpenTitan timer # gpg: Signature made Thu 24 Jun 2021 13:00:26 BST # gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054 # gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [full] # Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054 * remotes/alistair/tags/pull-riscv-to-apply-20210624-2: hw/riscv: OpenTitan: Connect the mtime and mtimecmp timer hw/timer: Initial commit of Ibex Timer hw/char/ibex_uart: Make the register layout private hw/char: QOMify sifive_uart hw/char: Consistent function names for sifive_uart target/riscv: gdbstub: Fix dynamic CSR XML generation target/riscv: Use target_ulong for the DisasContext misa Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-06-25Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2021-06-24' ↵Peter Maydell
into staging Block patch: - Fix Coverity complaint in block/snapshot.c # gpg: Signature made Thu 24 Jun 2021 12:42:28 BST # gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40 # gpg: issuer "mreitz@redhat.com" # gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full] # Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40 * remotes/maxreitz/tags/pull-block-2021-06-24: block/snapshot: Clarify goto fallback behavior Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-06-25machine: reject -smp dies!=1 for non-PC machinesPaolo Bonzini
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20210617155308.928754-11-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-25machine: pass QAPI struct to mc->smp_parsePaolo Bonzini
As part of converting -smp to a property with a QAPI type, define the struct and use it to do the actual parsing. machine_smp_parse takes care of doing the QemuOpts->QAPI conversion by hand, for now. Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20210617155308.928754-10-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-25machine: add error propagation to mc->smp_parsePaolo Bonzini
Clean up the smp_parse functions to use Error** instead of exiting. Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20210617155308.928754-9-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-25machine: move common smp_parse code to callerPaolo Bonzini
Most of smp_parse and pc_smp_parse is guarded by an "if (opts)" conditional, and the rest is common to both function. Move the conditional and the common code to the caller, machine_smp_parse. Move the replay_add_blocker call after all errors are checked for. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20210617155308.928754-8-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-25machine: move dies from X86MachineState to CpuTopologyPaolo Bonzini
In order to make SMP configuration a Machine property, we need a getter as well as a setter. To simplify the implementation put everything that the getter needs in the CpuTopology struct. Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20210617155308.928754-7-pbonzini@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2021-06-25hw/block/fdc: Add description to floppy controllersPhilippe Mathieu-Daudé
Change the '-device help' output from: Storage devices: name "floppy", bus floppy-bus, desc "virtual floppy drive" name "isa-fdc", bus ISA to: Storage devices: name "floppy", bus floppy-bus, desc "virtual floppy drive" name "isa-fdc", bus ISA, desc "virtual floppy controller" Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210614193220.2007159-7-philmd@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-25hw/block/fdc: Extract SysBus floppy controllers to fdc-sysbus.cPhilippe Mathieu-Daudé
Some machines use floppy controllers via the SysBus interface, and don't need to pull in all the SysBus code. Extract the SysBus specific code to a new unit: fdc-sysbus.c, and add a new Kconfig symbol: "FDC_SYSBUS". Reviewed-by: John Snow <jsnow@redhat.com> Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210614193220.2007159-6-philmd@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-25hw/block/fdc: Extract ISA floppy controllers to fdc-isa.cPhilippe Mathieu-Daudé
Some machines use floppy controllers via the SysBus interface, and don't need to pull in all the ISA code. Extract the ISA specific code to a new unit: fdc-isa.c, and add a new Kconfig symbol: "FDC_ISA". This allows us to remove the FIXME from commit dd0ff8191ab ("isa: express SuperIO dependencies with Kconfig"). Reviewed-by: John Snow <jsnow@redhat.com> Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210614193220.2007159-5-philmd@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-25hw/block/fdc: Declare shared prototypes in fdc-internal.hPhilippe Mathieu-Daudé
We want to extract ISA/SysBus code from the generic fdc.c file. First, declare the prototypes we will access from the new units into a new local header: "fdc-internal.h". Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210614193220.2007159-4-philmd@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-25hw/block/fdc: Replace disabled fprintf() by trace eventPhilippe Mathieu-Daudé
Reviewed-by: John Snow <jsnow@redhat.com> Acked-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210614193220.2007159-3-philmd@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-25hw/isa/Kconfig: Fix missing dependency ISA_SUPERIO -> FDCPhilippe Mathieu-Daudé
isa_superio_realize() calls isa_fdc_init_drives(), which is defined in hw/block/fdc.c, so ISA_SUPERIO needs to select the FDC symbol. Reported-by: John Snow <jsnow@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20210614193220.2007159-2-philmd@redhat.com Fixes: c0ff3795143 ("Introduce a CONFIG_ISA_SUPERIO switch for isa-superio.c") Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Signed-off-by: John Snow <jsnow@redhat.com>
2021-06-25block-copy: atomic .cancelled and .finished fields in BlockCopyCallStateEmanuele Giuseppe Esposito
By adding acquire/release pairs, we ensure that .ret and .error_is_read fields are written by block_copy_dirty_clusters before .finished is true, and that they are read by API user after .finished is true. The atomic here are necessary because the fields are concurrently modified in coroutines, and read outside. Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Message-Id: <20210624072043.180494-6-eesposit@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2021-06-25block-copy: add CoMutex lockEmanuele Giuseppe Esposito
Group various structures fields, to better understand what we need to protect with a lock and what doesn't need it. Then, add a CoMutex to protect concurrent access of block-copy data structures. This mutex also protects .copy_bitmap, because its thread-safe API does not prevent it from assigning two tasks to the same bitmap region. Exceptions to the lock: - .sleep_state is handled in the series "coroutine: new sleep/wake API" and thus here left as TODO. - .finished, .cancelled and reads to .ret and .error_is_read will be protected in the following patch, because are used also outside coroutines. - .skip_unallocated is atomic. Including it under the mutex would increase the critical sections and make them also much more complex. We can have it as atomic since it is only written from outside and read by block-copy coroutines. Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Message-Id: <20210624072043.180494-5-eesposit@redhat.com> [vsementsov: fix typo in comment] Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2021-06-25block-copy: move progress_set_remaining in block_copy_task_endEmanuele Giuseppe Esposito
Moving this function in task_end ensures to update the progress anyways, even if there is an error. It also helps in next patch, allowing task_end to have only one critical section. Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Message-Id: <20210624072043.180494-4-eesposit@redhat.com> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2021-06-25block-copy: streamline choice of copy_range vs. read/writePaolo Bonzini
Put the logic to determine the copy size in a separate function, so that there is a simple state machine for the possible methods of copying data from one BlockDriverState to the other. Use .method instead of .copy_range as in-out argument, and include also .zeroes as an additional copy method. While at it, store the common computation of block_copy_max_transfer into a new field of BlockCopyState, and make sure that we always obey max_transfer; that's more efficient even for the COPY_RANGE_READ_WRITE case. Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20210624072043.180494-3-eesposit@redhat.com> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2021-06-25block-copy: small refactor in block_copy_task_entry and block_copy_commonEmanuele Giuseppe Esposito
Use a local variable instead of referencing BlockCopyState through a BlockCopyCallState or BlockCopyTask every time. This is in preparation for next patches. No functional change intended. Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Message-Id: <20210624072043.180494-2-eesposit@redhat.com> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2021-06-25co-shared-resource: protect with a mutexEmanuele Giuseppe Esposito
co-shared-resource is currently not thread-safe, as also reported in co-shared-resource.h. Add a QemuMutex because co_try_get_from_shres can also be invoked from non-coroutine context. Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Message-Id: <20210614081130.22134-6-eesposit@redhat.com> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2021-06-25progressmeter: protect with a mutexEmanuele Giuseppe Esposito
Progressmeter is protected by the AioContext mutex, which is taken by the block jobs and their caller (like blockdev). We would like to remove the dependency of block layer code on the AioContext mutex, since most drivers and the core I/O code are already not relying on it. Create a new C file to implement the ProgressMeter API, but keep the struct as public, to avoid forcing allocation on the heap. Also add a mutex to be able to provide an accurate snapshot of the progress values to the caller. Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20210614081130.22134-5-eesposit@redhat.com> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2021-06-25blockjob: let ratelimit handle a speed of 0Paolo Bonzini
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Message-Id: <20210614081130.22134-4-eesposit@redhat.com> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2021-06-25block-copy: let ratelimit handle a speed of 0Paolo Bonzini
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Message-Id: <20210614081130.22134-3-eesposit@redhat.com> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2021-06-25ratelimit: treat zero speed as unlimitedPaolo Bonzini
Both users of RateLimit, block-copy.c and blockjob.c, treat a speed of zero as unlimited, while RateLimit treats it as "as slow as possible". The latter is nicer from the code point of view but pretty useless, so disable rate limiting if a speed of zero is provided. Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Message-Id: <20210614081130.22134-2-eesposit@redhat.com> Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2021-06-25Merge remote-tracking branch ↵Peter Maydell
'remotes/stsquad/tags/pull-testing-updates-250621-1' into staging A few miscellaneous fixes - tweak tcg/kvm based GIC tests - add header to MTTCG docs - cleanup checkpatch handling - GitLab feature and bug request templates - symbol resolution helper for plugin API - skip hppa/s390x signals test until fixes arrive # gpg: Signature made Fri 25 Jun 2021 10:10:57 BST # gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44 # gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full] # Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44 * remotes/stsquad/tags/pull-testing-updates-250621-1: plugins/api: expose symbol lookup to plugins tests/tcg: skip the signals test for hppa/s390x for now GitLab: Add "Feature Request" issue template. GitLab: Add "Bug" issue reporting template scripts/checkpatch: roll diff tweaking into checkpatch itself docs/devel: Add a single top-level header to MTTCG's doc tests/acceptance: tweak the tcg/kvm tests for virt Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-06-25plugins/api: expose symbol lookup to pluginsAlex Bennée
This is a quality of life helper for plugins so they don't need to re-implement symbol lookup when dumping an address. The strings are constant so don't need to be duplicated. One minor tweak is to return NULL instead of a zero length string to show lookup failed. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com> Message-Id: <20210608040532.56449-2-ma.mandourr@gmail.com> Message-Id: <20210623102749.25686-8-alex.bennee@linaro.org>
2021-06-25tests/tcg: skip the signals test for hppa/s390x for nowAlex Bennée
There are fixes currently in flight but as this is getting in the way of a green CI we might as well skip for now. For reference the fix series are: linux-user: Move signal trampolines to new page 20210616011209.1446045-1-richard.henderson@linaro.org and linux-user: Load a vdso for x86_64 and hppa 20210619034329.532318-1-richard.henderson@linaro.org Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Acked-by: Cornelia Huck <cohuck@redhat.com> Cc: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20210623102749.25686-7-alex.bennee@linaro.org>
2021-06-25GitLab: Add "Feature Request" issue template.John Snow
Based on Peter Krempa's libvirt template, feature.md. Signed-off-by: John Snow <jsnow@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> CC: Peter Krempa <pkrempa@redhat.com> Message-Id: <20210607153155.1760158-3-jsnow@redhat.com> Message-Id: <20210623102749.25686-6-alex.bennee@linaro.org>
2021-06-25GitLab: Add "Bug" issue reporting templateJohn Snow
Based loosely on libvirt's template, written by Peter Krempa. Signed-off-by: John Snow <jsnow@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> CC: Peter Krempa <pkrempa@redhat.com> Message-Id: <20210607153155.1760158-2-jsnow@redhat.com> Message-Id: <20210623102749.25686-5-alex.bennee@linaro.org>
2021-06-25scripts/checkpatch: roll diff tweaking into checkpatch itselfAlex Bennée
Rather than relying on external tweaks lets just do it inside checkpatch's direct commitish handling which is QEMU specific code anyway. Suggested-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Willian Rampazzo <willianr@redhat.com> Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Message-Id: <20210623102749.25686-4-alex.bennee@linaro.org>
2021-06-25docs/devel: Add a single top-level header to MTTCG's docLuis Pires
Without a single top-level header in the .rst file, the index ended up linking to all of the top-level headers separately. Now the index links to the top-level header at the beginning of the document and any inner headers are correctly linked as sub-items in the index. Signed-off-by: Luis Pires <luis.pires@eldorado.org.br> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20210528123526.144065-1-luis.pires@eldorado.org.br> Message-Id: <20210623102749.25686-3-alex.bennee@linaro.org>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-04 10:59:58 +0000