aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-11-21qga: Fix compiler warnings (missing format attribute, wrong format strings)Stefan Weil
gcc 4.8.2 reports this warning when extra warnings are enabled (-Wextra): CC qga/commands.o qga/commands.c: In function ‘slog’: qga/commands.c:28:5: error: function might be possible candidate for ‘gnu_printf’ format attribute [-Werror=suggest-attribute=format] g_logv("syslog", G_LOG_LEVEL_INFO, fmt, ap); ^ gcc 4.8.2 reports this warning when slog is declared with the gnu_printf format attribute: qga/commands-posix.c: In function ‘qmp_guest_file_open’: qga/commands-posix.c:404:5: warning: format ‘%d’ expects argument of type ‘int’, but argument 2 has type ‘int64_t’ [-Wformat=] slog("guest-file-open, handle: %d", handle); ^ On 32 bit hosts there are three more warnings which are also fixed here. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-11-21mips jazz: do not raise data bus exception when accessing invalid addressesHervé Poussineau
MIPS Jazz chipset doesn't seem to raise data bus exceptions on invalid accesses. However, there is no easy way to prevent them. Creating a big memory region for the whole address space doesn't prevent memory core to directly call unassigned_mem_read/write which in turn call cpu->do_unassigned_access, which (for MIPS CPU) raise an data bus exception. This fixes a MIPS Jazz regression introduced in c658b94f6e8c206c59d02aa6fbac285b86b53d2c. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-11-21target-i386: yield to another VCPU on PAUSEPaolo Bonzini
After commit b1bbfe7 (aio / timers: On timer modification, qemu_notify or aio_notify, 2013-08-21) FreeBSD guests report a huge slowdown. The problem shows up as soon as FreeBSD turns out its periodic (~1 ms) tick, but the timers are only the trigger for a pre-existing problem. Before the offending patch, setting a timer did a timer_settime system call. After, setting the timer exits the event loop (which uses poll) and reenters it with a new deadline. This does not cause any slowdown; the difference is between one system call (timer_settime and a signal delivery (SIGALRM) before the patch, and two system calls afterwards (write to a pipe or eventfd + calling poll again when re-entering the event loop). Unfortunately, the exit/enter causes the main loop to grab the iothread lock, which in turns kicks the VCPU thread out of execution. This causes TCG to execute the next VCPU in its round-robin scheduling of VCPUS. When the second VCPU is mostly unused, FreeBSD runs a "pause" instruction in its idle loop which only burns cycles without any progress. As soon as the timer tick expires, the first VCPU runs the interrupt handler but very soon it sets it again---and QEMU then goes back doing nothing in the second VCPU. The fix is to make the pause instruction do "cpu_loop_exit". Reported-by: Luigi Rizzo <rizzo@iet.unipi.it> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-11-21rng-egd: offset the point when repeatedly read from the bufferAmos Kong
The buffer content might be read out more than once, currently we just repeatedly read the first data block, buffer offset is missing. Cc: qemu-stable@nongnu.org Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-11-21rng-egd: remove redundant freeAmos Kong
We didn't set default chr_name, the free is redundant. Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-11-21target-i386: Fix build by providing stub kvm_arch_get_supported_cpuid()Peter Maydell
Fix build failures with clang when KVM is not enabled by providing a stub version of kvm_arch_get_supported_cpuid(). We retain the compile time check that this function isn't called when CONFIG_KVM is not set by guarding the stub with ifndef __OPTIMIZE__ (we assume that an optimizing build will do sufficient constant folding and dead code elimination to remove the calls before linking). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-11-21vfio-pci: Fix multifunction=onAlex Williamson
When an assigned device is initialized it copies the device config space into the emulated config space. Unfortunately multifunction is setup prior to the device initfn and gets clobbered. We need to restore it just like pci-assign does. Cc: qemu-stable@nongnu.org Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-11-21atomic.h: Fix build with clangPeter Maydell
clang defines __ATOMIC_SEQ_CST but its implementation of the __atomic_exchange() builtin differs from that of gcc. Move the __clang__ branch of the ifdef ladder to the top and fix its implementation (there is no such builtin as __sync_exchange), so we can compile with clang again. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-11-21pc: get rid of builtin pvpanic for "-M pc-1.5"Paolo Bonzini
This causes two slight backwards-incompatibilities between "-M pc-1.5" and 1.5's "-M pc": (1) a fw_cfg file is removed with this patch. This is only a problem if migration stops the virtual machine exactly during fw_cfg enumeration. (2) after migration, a VM created without an explicit "-device pvpanic" will stop reporting panics to management. The first problem only occurs if migration is done at a very, very early point (and I'm not sure it can happen in practice for reasonable-size VMs, since it will likely take more time to send the RAM to destination, than it will take for BIOS to scan fw_cfg). The second problem only occurs if the guest panics _and_ has a guest driver _and_ management knows to look at the crash event, so it is mostly theoretical at this point in time. Thus keep the code simple, and pretend it was never broken. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-11-21configure: Explicitly set ARFLAGS so we can build with GNU Make 4.0Peter Maydell
Our rules.mak adds '-rR' to MAKEFLAGS to indicate that we will be explicitly specifying everything and not relying on any default variables or rules. However we were accidentally relying on the default ARFLAGS ("rv"). This went unnoticed because of a bug in GNU Make 3.82 and earlier which meant that adding -rR to MAKEFLAGS only affected submakes, not the currently running instance. Explicitly set ARFLAGS in config-host.mak, in the same way we handle CFLAGS and LDFLAGS; this will allow us to work with Make 4.0. Thanks to Paul Smith for analyzing this bug for us. Cc: qemu-stable@nongnu.org Reported-by: Ken Moffat <zarniwhoop@ntlworld.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-11-21sun4m: Add FCode ROM for TCX framebufferMark Cave-Ayland
Upstream OpenBIOS now implements SBus probing in order to determine the contents of a physical bus slot, which is required to allow OpenBIOS to identify the framebuffer without help from the fw_cfg interface. SBus probing works by detecting the presence of an FCode program (effectively tokenised Forth) at the base address of each slot, and if present executes it so that it creates its own device node in the OpenBIOS device tree. The FCode ROM is generated as part of the OpenBIOS build and should generally be updated at the same time. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> CC: Blue Swirl <blauwirbel@gmail.com> CC: Bob Breuer <breuerr@mc.net> CC: Artyom Tarasenko <atar4qemu@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-11-19Merge remote-tracking branch 'quintela/migration.next' into stagingAnthony Liguori
# By Peter Lieven # Via Juan Quintela * quintela/migration.next: migration: drop MADVISE_DONT_NEED for incoming zero pages Message-id: 1384878412-23521-1-git-send-email-quintela@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-11-19Merge remote-tracking branch 'stefanha/block' into stagingAnthony Liguori
# By Andreas Färber # Via Stefan Hajnoczi * stefanha/block: qtest: Use -display none by default
2013-11-19Merge remote-tracking branch 'afaerber/tags/qom-devices-for-anthony' into ↵Anthony Liguori
staging QOM infrastructure fixes for 1.7 * QOM memory leak fix # gpg: Signature made Tue 19 Nov 2013 01:58:58 AM PST using RSA key ID 3E7E013F # gpg: Can't check signature: public key not found # By Vlad Yasevich # Via Andreas Färber * afaerber/tags/qom-devices-for-anthony: qom: Fix memory leak in object_property_set_link()
2013-11-19Merge remote-tracking branch 'rth/tcg-ia64-17' into stagingAnthony Liguori
# By Richard Henderson # Via Richard Henderson * rth/tcg-ia64-17: tcg-ia64: Introduce tcg_opc_bswap64_i tcg-ia64: Introduce tcg_opc_ext_i tcg-ia64: Introduce tcg_opc_movi_a tcg-ia64: Introduce tcg_opc_mov_a tcg-ia64: Use A3 form of logical operations tcg-ia64: Use SUB_A3 and ADDS_A4 for subtraction tcg-ia64: Use ADDS for small addition tcg-ia64: Avoid unnecessary stop bit in tcg_out_alu tcg-ia64: Move AREG0 to R32 tcg-ia64: Simplify brcond tcg-ia64: Handle constant calls tcg-ia64: Use shortcuts for nop insns tcg-ia64: Use TCGMemOp within qemu_ldst routines Message-id: 1384811395-7097-1-git-send-email-rth@twiddle.net Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-11-19Merge remote-tracking branch 'mst/tags/for_anthony' into stagingAnthony Liguori
pc last minute fixes for 1.8 This has a patch that drops an unused FW CFG entry. I think it's best to include it before 1.7 to avoid the need to maintain it in compat machine types. There's also a doc bugfix by Amos: I'm guessing doc fixes are still fair game even at this late stage. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Mon 18 Nov 2013 03:48:14 AM PST using RSA key ID D28D5469 # gpg: Can't check signature: public key not found # By Amos Kong (1) and Igor Mammedov (1) # Via Michael S. Tsirkin * mst/tags/for_anthony: doc: fix hardcoded helper path pc: disable pci-info Message-id: 1384775449-6693-1-git-send-email-mst@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-11-19Merge remote-tracking branch 'mjt/trivial-patches' into stagingAnthony Liguori
# By Jan Krupa (4) and others # Via Michael Tokarev * mjt/trivial-patches: hw/i386/Makefile.obj: use $(PYTHON) to run .py scripts consistently configure: Use -B switch only for Python versions which support it qga: Fix shutdown command of guest agent to work with SysV console: Remove unused debug code qga: Fix compilation for old versions of MinGW .travis.yml: basic compile and check recipes pci-assign: Fix error_report of pci-stub message qapi: Fix comment for create-type to match code. vl: fix build when configured with no graphic support usb: drop unused USBNetState.inpkt field qemu-char: add missing characters used in keymaps qemu-char: add support for U-prefixed symbols qemu-char: add Czech keymap file qemu-char: add Czech characters to VNC keysyms Message-id: 1384684850-6777-1-git-send-email-mjt@msgid.tls.msk.ru Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-11-19Merge remote-tracking branch 'kwolf/tags/for-anthony' into stagingAnthony Liguori
Block fixes for 1.7.0 # gpg: Signature made Fri 15 Nov 2013 09:51:25 AM PST using RSA key ID C88F2FD6 # gpg: Can't check signature: public key not found # By Max Reitz (3) and others # Via Kevin Wolf * kwolf/tags/for-anthony: block: Fail if requested driver is not available MAINTAINERS: add block driver sub-maintainers qemu-img: Fix overwriting 'ret' before using qemu-iotests: Test qcow2 count_contiguous_clusters() qcow2: fix possible corruption when reading multiple clusters qmp: access the local QemuOptsLists for drive option MAINTAINERS: add block tree repo URLs qemu-iotests: Extend 041 for unbacked mirroring block/drive-mirror: Check for NULL backing_hd qapi-schema: Update description for NewImageMode block: Print its file name if backing file opening failed Message-id: 1384537999-5972-1-git-send-email-kwolf@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-11-19Merge remote-tracking branch 'stefanha/net' into stagingAnthony Liguori
# By Amos Kong (1) and Sebastian Huber (1) # Via Stefan Hajnoczi * stefanha/net: virtio-net: fix the memory leak in rxfilter_notify() smc91c111: Fix receive starvation Message-id: 1384532032-19057-1-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-11-19Merge remote-tracking branch 'agraf/tags/signed-ppc-for-upstream-1.7' into ↵Anthony Liguori
staging Patch queue for ppc - 2013-11-08 These are two patches that will hopefully make it into 1.7. The SLOF update fixes -append kernel command line argument passing into the guest kernel. The other patch makes VIO devices appear when using -device '?'. # gpg: Signature made Thu 07 Nov 2013 07:34:54 PM PST using RSA key ID 03FEDC60 # gpg: Can't check signature: public key not found # By Alexey Kardashevskiy # Via Alexander Graf * agraf/tags/signed-ppc-for-upstream-1.7: pseries: Update SLOF firmware image spapr: add vio-bus devices to categories Message-id: 1383881766-13958-1-git-send-email-agraf@suse.de Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-11-19migration: drop MADVISE_DONT_NEED for incoming zero pagesPeter Lieven
The madvise for zeroed out pages was introduced when every transferred zero page was memset to zero and thus allocated. Since commit 211ea740 we check for zeroness of a target page before we memset it to zero. Additionally we memmap target memory so it is essentially zero initialized (except for e.g. option roms and bios which are loaded into target memory although they shouldn't). It was reported recently that this madvise causes a performance degradation in some situations. As the madvise should only be called rarely and if it's called it is likely on a busy page (it was non-zero and changed to zero during migration) drop it completely. Reported-By: Zhang Haoyu <haoyu.zhang@huawei.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Juan Quintela <quintela@redhat.com>
2013-11-19qom: Fix memory leak in object_property_set_link()Vlad Yasevich
Save the result of the call to object_get_canonical_path() so we can free it. Cc: qemu-stable@nongnu.org Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Reviewed-by: Amos Kong <akong@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Andreas Färber <afaerber@suse.de>
2013-11-19qtest: Use -display none by defaultAndreas Färber
This avoids each test needing to add it to suppress windows popping up. [Commit 7ceeedd016facf8d58e14a0d1417fa7225d71072 ("blockdev-test: add test case for drive_add duplicate IDs") and commit 43cd209803d6cffb1e1a028c9ff2fd0ff4fce954 ("qdev-monitor-test: add device_add leak test cases") added qtest tests without specifying -display none. As a result, "make check" now tries to use graphics (GTK or SDL). Since graphics are not used by the test and inappropriate for headless "make check" runs, add the missing -display none. This fixes "make check" in the QEMU buildbot. -- Stefan] Signed-off-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-11-19virtio-net: fix the memory leak in rxfilter_notify()Amos Kong
object_get_canonical_path() returns a gchar*, it should be freed by the caller. Signed-off-by: Amos Kong <akong@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Vlad Yasevich <vyasevic@redhat.com> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-11-18doc: fix hardcoded helper pathAmos Kong
The install directory of qemu-bridge-helper is configurable, but we use a fixed path in the documentation. DEFAULT_BRIDGE_HELPER macro isn't available in texi mode, we should always use "/path/to/" prefix for dynamic paths (e.g.: /path/to/image, /path/to/linux, etc). Signed-off-by: Amos Kong <akong@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-11-18tcg-ia64: Introduce tcg_opc_bswap64_iRichard Henderson
Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-11-18tcg-ia64: Introduce tcg_opc_ext_iRichard Henderson
Being able to "extend" from 64-bits (with a mov) simplifies a few places where the conditional breaks the train of thought. Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-11-18tcg-ia64: Introduce tcg_opc_movi_aRichard Henderson
Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-11-18tcg-ia64: Introduce tcg_opc_mov_aRichard Henderson
Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-11-18tcg-ia64: Use A3 form of logical operationsRichard Henderson
We can and/or/xor/andcm small constants, saving one cycle. Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-11-18tcg-ia64: Use SUB_A3 and ADDS_A4 for subtractionRichard Henderson
We can subtract from more small constants that just 0 with one insn, and we can add the negative for most small constants. Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-11-18tcg-ia64: Use ADDS for small additionRichard Henderson
Avoids a wasted cycle loading up small constants. Simplify the code assuming the tcg optimizer is going to work and don't expect the first operand of the add to be constant. Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-11-18tcg-ia64: Avoid unnecessary stop bit in tcg_out_aluRichard Henderson
When performing an operation with two input registers, we'd leave the stop bit (and thus an extra cycle) that's only needed when one or the other input is a constant. Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-11-18tcg-ia64: Move AREG0 to R32Richard Henderson
Since the move away from the global areg0, we're no longer globally reserving areg0. Which means our use of R7 clobbers a call-saved register. Shift areg0 into the windowed registers. Indeed, choose the incoming parameter register that it comes to us by. This requires moving the register holding the return address elsewhere. Choose R33 for tidiness. Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-11-18tcg-ia64: Simplify brcondRichard Henderson
There was a misconception that a stop bit is required between a compare and the branch that uses the predicate set by the compare. This lead to the usage of an extra bundle in which to perform the compare. The extra bundle left room for constants to be loaded for use with the compare insn. If we pack the compare and the branch together in the same bundle, then there's no longer any room for non-zero constants. At which point we can eliminate half the function by not handling them. Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-11-18tcg-ia64: Handle constant callsRichard Henderson
Using only indirect calls results in 3 bundles (one to load the descriptor address), and 4 stop bits. By looking through the descriptor to the constants, we can perform the call with 2 bundles and only 1 stop bit. Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-11-18tcg-ia64: Use shortcuts for nop insnsRichard Henderson
There's no need to go through the full opcode-to-insn function call to generate nops. This makes the source a bit more readable. Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-11-18tcg-ia64: Use TCGMemOp within qemu_ldst routinesRichard Henderson
Acked-by: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Richard Henderson <rth@twiddle.net>
2013-11-17hw/i386/Makefile.obj: use $(PYTHON) to run .py scripts consistentlyMichael Tokarev
$(PYTHON) is a Make variable which is set by configure. In all other places over the tree, .py files are run from Makefiles using this variable, except of a single leftover in hw/i386/Makefile.obj (and a nearby place in there uses $(PYTHON) correctly). Fix this leftover too. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Cc: Luigi Rizzo <rizzo@iet.unipi.it> Reviewed-by:: Stefan Weil <sw@weilnetz.de>
2013-11-17configure: Use -B switch only for Python versions which support itStefan Weil
Commit 1d984a67a95d88f3e708b077dab8adeb47c38c93 added the -B switch unconditionally. This breaks Python versions before 2.6 which don't support that switch. Now configure adds -B only if it is accepted by the Python interpreter. This modification introduces a small incompatibility because -B might now also be added when configure was called with --python=PYTHON_INTERPRETER. Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-11-16qga: Fix shutdown command of guest agent to work with SysVwhitearchey
For now guest agent uses following command to shutdown system: shutdown -P +0 "blabla" but this syntax works only with shutdown command from systemd or upstart, because SysV shutdown requires -h switch. Following patch changes the command so it works with systemd, upstart and SysV With upstart/systemd qga use one of thee commands, depending on 'mode' parameter: shutdown -P +0 "..." shutdown -H +0 "..." shutdown -r +0 "..." SysV equivalents for these are: shutdown -h -P +0 "..." shutdown -h -H +0 "..." shutdown -h -r +0 "..." and these retain their meaning with upstart/systemd. According to FreeBSD manpages, shutdown does not accept -P and -H options. Commands should be: shutdown -p +0 "..." shutdown -h +0 "..." shutdown -r +0 "..." shutdown in Solaris does not accept any of -hHpPr and does not accept time in "+0" format Signed-off-by: Michael Avdienko <whitearchey@gmail.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-11-15block: Fail if requested driver is not availableKevin Wolf
If an explicit driver option is present, but doesn't specify a valid driver, then bdrv_open() should fail instead of probing the format. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Jeff Cody <jcody@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-11-15MAINTAINERS: add block driver sub-maintainersStefan Hajnoczi
There are a number of contributors who maintain block drivers (image formats and protocols). They should be listed in the MAINTAINERS file so that get_maintainer.pl lists them. Note that commits are still merged through Kevin or Stefan's block tree but the block driver sub-maintainers are usually the ones to review patches. Acked-by: Kevin Wolf <kwolf@redhat.com> Acked-by: Richard W.M. Jones <rjones@redhat.com> Acked-by: Stefan Weil <sw@weilnetz.de> Acked-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Jeff Cody <jcody@redhat.com> Acked-by: Anthony Liguori <aliguori@amazon.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-11-15qemu-img: Fix overwriting 'ret' before usingFam Zheng
This patch moves ret assignment after reporting original error. We were lucky to pass qemu-iotests 048 (qemu-img compare case) but when I tried to run with TEST_DIR=/tmp (tmpfs), it fails with a "wrong" mismatch offset. This fixes two bugs. In the first if branch, setting ret to 1 before using it makes dead code in the next line: pnum is never added to mismatch offset even if ret was 0. In the other if branch, currently the output error is always -4: strerror(-4) -> Unknown error -4 Added regression test in case 048. Signed-off-by: Fam Zheng <famz@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com>
2013-11-15qemu-iotests: Test qcow2 count_contiguous_clusters()Kevin Wolf
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-11-15smc91c111: Fix receive starvationSebastian Huber
In case the smc91c111 interface signals that it cannot receive more packets the packets are queued and further reception will be disabled. In case the interface is again ready to receive packets notify the upper layer. Signed-off-by: Sebastian Huber <sebastian.huber@embedded-brains.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-11-14qcow2: fix possible corruption when reading multiple clustersPeter Lieven
if multiple sectors spanning multiple clusters are read the function count_contiguous_clusters should ensure that the cluster type should not change between the clusters. Especially the for-loop should break when we have one or more normal clusters followed by a compressed cluster. Unfortunately the wrong macro was used in the mask to compare the flags. This was discovered while debugging a data corruption issue when converting a compressed qcow2 image to raw. qemu-img reads 2MB chunks which span multiple clusters. CC: qemu-stable@nongnu.org Signed-off-by: Peter Lieven <pl@kamp.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-11-14qmp: access the local QemuOptsLists for drive optionAmos Kong
Currently we have three QemuOptsList (qemu_common_drive_opts, qemu_legacy_drive_opts, and qemu_drive_opts), only qemu_drive_opts is added to vm_config_groups[]. This patch changes query-command-line-options to access three local QemuOptsLists for drive option, and merge the description items together. Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-11-14MAINTAINERS: add block tree repo URLsStefan Hajnoczi
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2013-11-14qemu-iotests: Extend 041 for unbacked mirroringMax Reitz
Add a new test case in file 041 for mirroring unbacked images in "absolute-paths" mode. This should work, if possible, but most importantly, qemu should never crash. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-12 18:26:59 +0000