aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2024-04-03hw/net/virtio-net: fix qemu set used ring flag even vhost startedYajun Wu
When vhost-user or vhost-kernel is handling virtio net datapath, QEMU should not touch used ring. But with vhost-user socket reconnect scenario, in a very rare case (has pending kick event). VRING_USED_F_NO_NOTIFY is set by QEMU in following code path: #0 virtio_queue_split_set_notification (vq=0x7ff5f4c920a8, enable=0) at ../hw/virtio/virtio.c:511 #1 0x0000559d6dbf033b in virtio_queue_set_notification (vq=0x7ff5f4c920a8, enable=0) at ../hw/virtio/virtio.c:576 #2 0x0000559d6dbbbdbc in virtio_net_handle_tx_bh (vdev=0x559d703a6aa0, vq=0x7ff5f4c920a8) at ../hw/net/virtio-net.c:2801 #3 0x0000559d6dbf4791 in virtio_queue_notify_vq (vq=0x7ff5f4c920a8) at ../hw/virtio/virtio.c:2248 #4 0x0000559d6dbf79da in virtio_queue_host_notifier_read (n=0x7ff5f4c9211c) at ../hw/virtio/virtio.c:3525 #5 0x0000559d6d9a5814 in virtio_bus_cleanup_host_notifier (bus=0x559d703a6a20, n=1) at ../hw/virtio/virtio-bus.c:321 #6 0x0000559d6dbf83c9 in virtio_device_stop_ioeventfd_impl (vdev=0x559d703a6aa0) at ../hw/virtio/virtio.c:3774 #7 0x0000559d6d9a55c8 in virtio_bus_stop_ioeventfd (bus=0x559d703a6a20) at ../hw/virtio/virtio-bus.c:259 #8 0x0000559d6d9a53e8 in virtio_bus_grab_ioeventfd (bus=0x559d703a6a20) at ../hw/virtio/virtio-bus.c:199 #9 0x0000559d6dbf841c in virtio_device_grab_ioeventfd (vdev=0x559d703a6aa0) at ../hw/virtio/virtio.c:3783 #10 0x0000559d6d9bde18 in vhost_dev_enable_notifiers (hdev=0x559d707edd70, vdev=0x559d703a6aa0) at ../hw/virtio/vhost.c:1592 #11 0x0000559d6d89a0b8 in vhost_net_start_one (net=0x559d707edd70, dev=0x559d703a6aa0) at ../hw/net/vhost_net.c:266 #12 0x0000559d6d89a6df in vhost_net_start (dev=0x559d703a6aa0, ncs=0x559d7048d890, data_queue_pairs=31, cvq=0) at ../hw/net/vhost_net.c:412 #13 0x0000559d6dbb5b89 in virtio_net_vhost_status (n=0x559d703a6aa0, status=15 '\017') at ../hw/net/virtio-net.c:311 #14 0x0000559d6dbb5e34 in virtio_net_set_status (vdev=0x559d703a6aa0, status=15 '\017') at ../hw/net/virtio-net.c:392 #15 0x0000559d6dbb60d8 in virtio_net_set_link_status (nc=0x559d7048d890) at ../hw/net/virtio-net.c:455 #16 0x0000559d6da64863 in qmp_set_link (name=0x559d6f0b83d0 "hostnet1", up=true, errp=0x7ffdd76569f0) at ../net/net.c:1459 #17 0x0000559d6da7226e in net_vhost_user_event (opaque=0x559d6f0b83d0, event=CHR_EVENT_OPENED) at ../net/vhost-user.c:301 #18 0x0000559d6ddc7f63 in chr_be_event (s=0x559d6f2ffea0, event=CHR_EVENT_OPENED) at ../chardev/char.c:62 #19 0x0000559d6ddc7fdc in qemu_chr_be_event (s=0x559d6f2ffea0, event=CHR_EVENT_OPENED) at ../chardev/char.c:82 This issue causes guest kernel stop kicking device and traffic stop. Add vhost_started check in virtio_net_handle_tx_bh to fix this wrong VRING_USED_F_NO_NOTIFY set. Signed-off-by: Yajun Wu <yajunw@nvidia.com> Reviewed-by: Jiri Pirko <jiri@nvidia.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Message-ID: <20240402045109.97729-1-yajunw@nvidia.com> [PMD: Use unlikely()] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> (cherry picked from commit 4c54f5bc8e1d38f15cc35b6a6932d8fbe219c692) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-04-02target/arm: take HSTR traps of cp15 accesses to EL2, not EL1Peter Maydell
The HSTR_EL2 register allows the hypervisor to trap AArch32 EL1 and EL0 accesses to cp15 registers. We incorrectly implemented this so they trap to EL1 when we detect the need for a HSTR trap at code generation time. (The check in access_check_cp_reg() which we do at runtime to catch traps from EL0 is correctly routing them to EL2.) Use the correct target EL when generating the code to take the trap. Cc: qemu-stable@nongnu.org Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2226 Fixes: 049edada5e93df ("target/arm: Make HSTR_EL2 traps take priority over UNDEF-at-EL1") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240325133116.2075362-1-peter.maydell@linaro.org (cherry picked from commit fbe5ac5671a9cfcc7f4aee9a5fac7720eea08876) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-04-02hw/intc/arm_gicv3: ICC_HPPIR* return SPURIOUS if int group is disabledPeter Maydell
If the group of the highest priority pending interrupt is disabled via ICC_IGRPEN*, the ICC_HPPIR* registers should return INTID_SPURIOUS, not the interrupt ID. (See the GIC architecture specification pseudocode functions ICC_HPPIR1_EL1[] and HighestPriorityPendingInterrupt().) Make HPPIR reads honour the group disable, the way we already do when determining whether to preempt in icc_hppi_can_preempt(). Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20240328153333.2522667-1-peter.maydell@linaro.org (cherry picked from commit 44e25fbc1900c99c91a44e532c5bd680bc403459) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-04-01gitlab-ci/cirrus: switch from 'master' to 'latest'Michael Tokarev
Commit ab72522797 "gitlab: switch from 'stable' to 'latest' docker container tags" switched most tags to 'latest' but missed cirrus image. Fix this now. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2256 Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Message-id: 20240401051633.2780456-1-mjt@tls.msk.ru Signed-off-by: Peter Maydell <peter.maydell@linaro.org> (cherry picked from commit 1d2f2b35bc86b7a13dc3009a3c5031220aa0b7de)
2024-04-01migration/postcopy: Ensure postcopy_start() sets errp if it failsAvihai Horon
There are several places where postcopy_start() fails without setting errp. This can cause a null pointer de-reference, as in case of error, the caller of postcopy_start() copies/prints the error set in errp. Fix it by setting errp in all of postcopy_start() error paths. Cc: qemu-stable <qemu-stable@nongnu.org> Fixes: 908927db28ea ("migration: Update error description whenever migration fails") Signed-off-by: Avihai Horon <avihaih@nvidia.com> Reviewed-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Link: https://lore.kernel.org/r/20240328140252.16756-3-avihaih@nvidia.com Signed-off-by: Peter Xu <peterx@redhat.com> (cherry picked from commit d0ad271a7613459bd0a3397c8071a4ad06f3f7eb) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-04-01target/hppa: Clear psw_n for BE on use_nullify_skip pathRichard Henderson
Along this path we have already skipped the insn to be nullified, so the subsequent insn should be executed. Cc: qemu-stable@nongnu.org Reported-by: Sven Schnelle <svens@stackframe.org> Tested-by: Sven Schnelle <svens@stackframe.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> (cherry picked from commit 4a3aa11e1fb25c28c24a43fd2835c429b00a463d) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-03-31tcg/optimize: Fix sign_mask for logical right-shiftRichard Henderson
The 'sign' computation is attempting to locate the sign bit that has been repeated, so that we can test if that bit is known zero. That computation can be zero if there are no known sign repetitions. Cc: qemu-stable@nongnu.org Fixes: 93a967fbb57 ("tcg/optimize: Propagate sign info for shifting") Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2248 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> (cherry picked from commit 2911e9b95f3bb03783ae5ca3e2494dc3b44a9161) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-03-31hw/net/net_tx_pkt: Fix virtio header without checksum offloadingAkihiko Odaki
It is incorrect to have the VIRTIO_NET_HDR_F_NEEDS_CSUM set when checksum offloading is disabled so clear the bit. TCP/UDP checksum is usually offloaded when the peer requires virtio headers because they can instruct the peer to compute checksum. However, igb disables TX checksum offloading when a VF is enabled whether the peer requires virtio headers because a transmitted packet can be routed to it and it expects the packet has a proper checksum. Therefore, it is necessary to have a correct virtio header even when checksum offloading is disabled. A real TCP/UDP checksum will be computed and saved in the buffer when checksum offloading is disabled. The virtio specification requires to set the packet checksum stored in the buffer to the TCP/UDP pseudo header when the VIRTIO_NET_HDR_F_NEEDS_CSUM bit is set so the bit must be cleared in that case. Fixes: ffbd2dbd8e64 ("e1000e: Perform software segmentation for loopback") Buglink: https://issues.redhat.com/browse/RHEL-23067 Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com> (cherry picked from commit 89a8de364b51db8107d2a210314431885ac52238) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-03-31virtio-net: Fix vhost virtqueue notifiers for RSSAkihiko Odaki
virtio_net_guest_notifier_pending() and virtio_net_guest_notifier_mask() checked VIRTIO_NET_F_MQ to know there are multiple queues, but VIRTIO_NET_F_RSS also enables multiple queues. Refer to n->multiqueue, which is set to true either of VIRTIO_NET_F_MQ or VIRTIO_NET_F_RSS is enabled. Fixes: 68b0a6395f36 ("virtio-net: align ctrl_vq index for non-mq guest for vhost_vdpa") Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Signed-off-by: Jason Wang <jasowang@redhat.com> (cherry picked from commit 1c188fc8cbffc5f05cc616cab4e1372fb6e6f11f) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-03-27target/riscv/kvm: fix timebase-frequency when using KVM accelerationYong-Xuan Wang
The timebase-frequency of guest OS should be the same with host machine. The timebase-frequency value in DTS should be got from hypervisor when using KVM acceleration. Signed-off-by: Yong-Xuan Wang <yongxuan.wang@sifive.com> Message-ID: <20240314061510.9800-1-yongxuan.wang@sifive.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> (cherry picked from commit 385e575cd5ab2436c123e4b7f8c9b383a64c0dbe) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> (Mjt: context fix due to missing other changes in this area in 8.2.x)
2024-03-27target/riscv: Fix mode in riscv_tlb_fillIrina Ryapolova
Need to convert mmu_idx to privilege mode for PMP function. Signed-off-by: Irina Ryapolova <irina.ryapolova@syntacore.com> Fixes: b297129ae1 ("target/riscv: propagate PMP permission to TLB page") Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20240320172828.23965-1-irina.ryapolova@syntacore.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> (cherry picked from commit e06adebb08325c39e4c9b652139426c10f021abb) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-03-27target/riscv: rvv: Remove the dependency of Zvfbfmin to ZfbfminMax Chou
According to the Zvfbfmin definition in the RISC-V BF16 extensions spec, the Zvfbfmin extension only requires either the V extension or the Zve32f extension. Signed-off-by: Max Chou <max.chou@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240321170929.1162507-1-max.chou@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> (cherry picked from commit c9b07fe14d3525cd3f2fc01f46eeb3d4ed7c3603) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-03-27hw/intc: Update APLIC IDC after claiming iforce registerFrank Chang
Currently, QEMU only sets the iforce register to 0 and returns early when claiming the iforce register. However, this may leave mip.meip remains at 1 if a spurious external interrupt triggered by iforce register is the only pending interrupt to be claimed, and the interrupt cannot be lowered as expected. This commit fixes this issue by calling riscv_aplic_idc_update() to update the IDC status after the iforce register is claimed. Signed-off-by: Frank Chang <frank.chang@sifive.com> Reviewed-by: Jim Shu <jim.shu@sifive.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240321104951.12104-1-frank.chang@sifive.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> (cherry picked from commit 078189b327ae5c5727b51ec714d9663b1d0ca3df) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-03-27target/riscv/vector_helper.c: optimize loops in ldst helpersDaniel Henrique Barboza
Change the for loops in ldst helpers to do a single increment in the counter, and assign it env->vstart, to avoid re-reading from vstart every time. Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20240314175704.478276-11-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> (cherry picked from commit 0a11629c915f61df798919db51a18ffe4649cb65) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-03-27target/riscv/vector_helpers: do early exit when vstart >= vlDaniel Henrique Barboza
We're going to make changes that will required each helper to be responsible for the 'vstart' management, i.e. we will relieve the 'vstart < vl' assumption that helpers have today. Helpers are usually able to deal with vstart >= vl, i.e. doing nothing aside from setting vstart = 0 at the end, but the tail update functions will update the tail regardless of vstart being valid or not. Unifying the tail update process in a single function that would handle the vstart >= vl case isn't trivial (see [1] for more info). This patch takes a blunt approach: do an early exit in every single vector helper if vstart >= vl, unless the helper is guarded with vstart_eq_zero in the translation. For those cases the helper is ready to deal with cases where vl might be zero, i.e. throwing exceptions based on it like vcpop_m() and first_m(). Helpers that weren't changed: - vcpop_m(), vfirst_m(), vmsetm(), GEN_VEXT_VIOTA_M(): these are guarded directly with vstart_eq_zero; - GEN_VEXT_VCOMPRESS_VM(): guarded with vcompress_vm_check() that checks vstart_eq_zero; - GEN_VEXT_RED(): guarded with either reduction_check() or reduction_widen_check(), both check vstart_eq_zero; - GEN_VEXT_FRED(): guarded with either freduction_check() or freduction_widen_check(), both check vstart_eq_zero. Another exception is vext_ldst_whole(), who operates on effective vector length regardless of the current settings in vtype and vl. [1] https://lore.kernel.org/qemu-riscv/1590234b-0291-432a-a0fa-c5a6876097bc@linux.alibaba.com/ Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240314175704.478276-7-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> (cherry picked from commit df4252b2ecaf93b601109373a17427d1867046e8) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-03-27target/riscv: always clear vstart in whole vec move insnsDaniel Henrique Barboza
These insns have 2 paths: we'll either have vstart already cleared if vstart_eq_zero or we'll do a brcond to check if vstart >= maxsz to call the 'vmvr_v' helper. The helper will clear vstart if it executes until the end, or if vstart >= vl. For starters, the check itself is wrong: we're checking vstart >= maxsz, when in fact we should use vstart in bytes, or 'startb' like 'vmvr_v' is calling, to do the comparison. But even after fixing the comparison we'll still need to clear vstart in the end, which isn't happening too. We want to make the helpers responsible to manage vstart, including these corner cases, precisely to avoid these situations: - remove the wrong vstart >= maxsz cond from the translation; - add a 'startb >= maxsz' cond in 'vmvr_v', and clear vstart if that happens. This way we're now sure that vstart is being cleared in the end of the execution, regardless of the path taken. Fixes: f714361ed7 ("target/riscv: rvv-1.0: implement vstart CSR") Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20240314175704.478276-5-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> (cherry picked from commit 7e53e3ddf6dff200098e112c5370ab16d2d5dbd1) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-03-27target/riscv/vector_helper.c: fix 'vmvr_v' memcpy endianessDaniel Henrique Barboza
vmvr_v isn't handling the case where the host might be big endian and the bytes to be copied aren't sequential. Suggested-by: Richard Henderson <richard.henderson@linaro.org> Fixes: f714361ed7 ("target/riscv: rvv-1.0: implement vstart CSR") Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-ID: <20240314175704.478276-4-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> (cherry picked from commit 768e7b329c0be22035da077fe76221dd0a47103b) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-03-27trans_rvv.c.inc: set vstart = 0 in int scalar move insnsDaniel Henrique Barboza
trans_vmv_x_s, trans_vmv_s_x, trans_vfmv_f_s and trans_vfmv_s_f aren't setting vstart = 0 after execution. This is usually done by a helper in vector_helper.c but these functions don't use helpers. We'll set vstart after any potential 'over' brconds, and that will also mandate a mark_vs_dirty() too. Fixes: dedc53cbc9 ("target/riscv: rvv-1.0: integer scalar move instructions") Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-ID: <20240314175704.478276-3-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> (cherry picked from commit 0848f7c18ef50de9f955e7eeb4363d92766a41bf) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-03-27target/riscv/vector_helper.c: set vstart = 0 in GEN_VEXT_VSLIDEUP_VX()Daniel Henrique Barboza
The helper isn't setting env->vstart = 0 after its execution, as it is expected from every vector instruction that completes successfully. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Message-ID: <20240314175704.478276-2-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> (cherry picked from commit d3646e31ce6d1e02e46e6eabdbc2e637c0cbece7) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-03-27monitor/hmp-cmds-target: Append a space in error message in gpa2hva()Yao Xingtao
In qemu monitor mode, when we use gpa2hva command to print the host virtual address corresponding to a guest physical address, if the gpa is not in RAM, the error message is below: (qemu) gpa2hva 0x750000000 Memory at address 0x750000000is not RAM A space is missed between '0x750000000' and 'is'. Signed-off-by: Yao Xingtao <yaoxt.fnst@fujitsu.com> Fixes: e9628441df ("hmp: gpa2hva and gpa2hpa hostaddr command") Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Dr. David Alan Gilbert <dave@treblig.org> Message-ID: <20240319021610.2423844-1-ruansy.fnst@fujitsu.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> (cherry picked from commit a158c63b3ba120f1656e4dd815d186c623fb5ef6) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-03-27hw/scsi/scsi-generic: Fix io_timeout property not applyingLorenz Brun
The io_timeout property, introduced in c9b6609 (part of 6.0) is silently overwritten by the hardcoded default value of 30 seconds (DEFAULT_IO_TIMEOUT) in scsi_generic_realize because that function is being called after the properties have already been applied. The property definition already has a default value which is applied correctly when no value is explicitly set, so we can just remove the code which overrides the io_timeout completely. This has been tested by stracing SG_IO operations with the io_timeout property set and unset and now sets the timeout field in the ioctl request to the proper value. Fixes: c9b6609b69facad ("scsi: make io_timeout configurable") Signed-off-by: Lorenz Brun <lorenz@brun.one> Message-ID: <20240315145831.2531695-1-lorenz@brun.one> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> (cherry picked from commit 7c7a9f578e4fb1adff7ac8d9acaaaedb87474e76) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-03-27target/i386/tcg: Enable page walking from MMIO memoryGregory Price
CXL emulation of interleave requires read and write hooks due to requirement for subpage granularity. The Linux kernel stack now enables using this memory as conventional memory in a separate NUMA node. If a process is deliberately forced to run from that node $ numactl --membind=1 ls the page table walk on i386 fails. Useful part of backtrace: (cpu=cpu@entry=0x555556fd9000, fmt=fmt@entry=0x555555fe3378 "cpu_io_recompile: could not find TB for pc=%p") at ../../cpu-target.c:359 (retaddr=0, addr=19595792376, attrs=..., xlat=<optimized out>, cpu=0x555556fd9000, out_offset=<synthetic pointer>) at ../../accel/tcg/cputlb.c:1339 (cpu=0x555556fd9000, full=0x7fffee0d96e0, ret_be=ret_be@entry=0, addr=19595792376, size=size@entry=8, mmu_idx=4, type=MMU_DATA_LOAD, ra=0) at ../../accel/tcg/cputlb.c:2030 (cpu=cpu@entry=0x555556fd9000, p=p@entry=0x7ffff56fddc0, mmu_idx=<optimized out>, type=type@entry=MMU_DATA_LOAD, memop=<optimized out>, ra=ra@entry=0) at ../../accel/tcg/cputlb.c:2356 (cpu=cpu@entry=0x555556fd9000, addr=addr@entry=19595792376, oi=oi@entry=52, ra=ra@entry=0, access_type=access_type@entry=MMU_DATA_LOAD) at ../../accel/tcg/cputlb.c:2439 at ../../accel/tcg/ldst_common.c.inc:301 at ../../target/i386/tcg/sysemu/excp_helper.c:173 (err=0x7ffff56fdf80, out=0x7ffff56fdf70, mmu_idx=0, access_type=MMU_INST_FETCH, addr=18446744072116178925, env=0x555556fdb7c0) at ../../target/i386/tcg/sysemu/excp_helper.c:578 (cs=0x555556fd9000, addr=18446744072116178925, size=<optimized out>, access_type=MMU_INST_FETCH, mmu_idx=0, probe=<optimized out>, retaddr=0) at ../../target/i386/tcg/sysemu/excp_helper.c:604 Avoid this by plumbing the address all the way down from x86_cpu_tlb_fill() where is available as retaddr to the actual accessors which provide it to probe_access_full() which already handles MMIO accesses. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2180 Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2220 Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Gregory Price <gregory.price@memverge.com> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-ID: <20240307155304.31241-2-Jonathan.Cameron@huawei.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> (cherry picked from commit 9dab7bbb017d11b64c52239fa4e2f910a6a004f2) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-03-27iotests: add test for stream job with an unaligned prefetch readFiona Ebner
Previously, bdrv_pad_request() could not deal with a NULL qiov when a read needed to be aligned. During prefetch, a stream job will pass a NULL qiov. Add a test case to cover this scenario. By accident, also covers a previous race during shutdown, where block graph changes during iteration in bdrv_flush_all() could lead to unreferencing the wrong block driver state and an assertion failure later. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com> Message-ID: <20240322095009.346989-5-f.ebner@proxmox.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> (cherry picked from commit 12d7b3bbd3333cededd3b695501d8d247239d769) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-03-27block-backend: fix edge case in bdrv_next_cleanup() where BDS associated to ↵Fiona Ebner
BB changes Same rationale as for commit "block-backend: fix edge case in bdrv_next() where BDS associated to BB changes". The block graph might change between the bdrv_next() call and the bdrv_next_cleanup() call, so it could be that the associated BDS is not the same that was referenced previously anymore. Instead, rely on bdrv_next() to set it->bs to the BDS it referenced and unreference that one in any case. Signed-off-by: Fiona Ebner <f.ebner@proxmox.com> Message-ID: <20240322095009.346989-4-f.ebner@proxmox.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> (cherry picked from commit bac09b093ebbb79e6a7444c7b979c32ca5540132) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-03-27block-backend: fix edge case in bdrv_next() where BDS associated to BB changesFiona Ebner
The old_bs variable in bdrv_next() is currently determined by looking at the old block backend. However, if the block graph changes before the next bdrv_next() call, it might be that the associated BDS is not the same that was referenced previously. In that case, the wrong BDS is unreferenced, leading to an assertion failure later: > bdrv_unref: Assertion `bs->refcnt > 0' failed. In particular, this can happen in the context of bdrv_flush_all(), when polling for bdrv_co_flush() in the generated co-wrapper leads to a graph change (for example with a stream block job [0]). A racy reproducer: > #!/bin/bash > rm -f /tmp/backing.qcow2 > rm -f /tmp/top.qcow2 > ./qemu-img create /tmp/backing.qcow2 -f qcow2 64M > ./qemu-io -c "write -P42 0x0 0x1" /tmp/backing.qcow2 > ./qemu-img create /tmp/top.qcow2 -f qcow2 64M -b /tmp/backing.qcow2 -F qcow2 > ./qemu-system-x86_64 --qmp stdio \ > --blockdev qcow2,node-name=node0,file.driver=file,file.filename=/tmp/top.qcow2 \ > <<EOF > {"execute": "qmp_capabilities"} > {"execute": "block-stream", "arguments": { "job-id": "stream0", "device": "node0" } } > {"execute": "quit"} > EOF [0]: > #0 bdrv_replace_child_tran (child=..., new_bs=..., tran=...) > #1 bdrv_replace_node_noperm (from=..., to=..., auto_skip=..., tran=..., errp=...) > #2 bdrv_replace_node_common (from=..., to=..., auto_skip=..., detach_subchain=..., errp=...) > #3 bdrv_drop_filter (bs=..., errp=...) > #4 bdrv_cor_filter_drop (cor_filter_bs=...) > #5 stream_prepare (job=...) > #6 job_prepare_locked (job=...) > #7 job_txn_apply_locked (fn=..., job=...) > #8 job_do_finalize_locked (job=...) > #9 job_exit (opaque=...) > #10 aio_bh_poll (ctx=...) > #11 aio_poll (ctx=..., blocking=...) > #12 bdrv_poll_co (s=...) > #13 bdrv_flush (bs=...) > #14 bdrv_flush_all () > #15 do_vm_stop (state=..., send_stop=...) > #16 vm_shutdown () Signed-off-by: Fiona Ebner <f.ebner@proxmox.com> Message-ID: <20240322095009.346989-3-f.ebner@proxmox.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> (cherry picked from commit f6d38c9f6dae6fce99dcaf6ca16a1fe5b5e19c4c) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-03-27block/io: accept NULL qiov in bdrv_pad_requestStefan Reiter
Some operations, e.g. block-stream, perform reads while discarding the results (only copy-on-read matters). In this case, they will pass NULL as the target QEMUIOVector, which will however trip bdrv_pad_request, since it wants to extend its passed vector. In particular, this is the case for the blk_co_preadv() call in stream_populate(). If there is no qiov, no operation can be done with it, but the bytes and offset still need to be updated, so the subsequent aligned read will actually be aligned and not run into an assertion failure. In particular, this can happen when the request alignment of the top node is larger than the allocated part of the bottom node, in which case padding becomes necessary. For example: > ./qemu-img create /tmp/backing.qcow2 -f qcow2 64M -o cluster_size=32768 > ./qemu-io -c "write -P42 0x0 0x1" /tmp/backing.qcow2 > ./qemu-img create /tmp/top.qcow2 -f qcow2 64M -b /tmp/backing.qcow2 -F qcow2 > ./qemu-system-x86_64 --qmp stdio \ > --blockdev qcow2,node-name=node0,file.driver=file,file.filename=/tmp/top.qcow2 \ > <<EOF > {"execute": "qmp_capabilities"} > {"execute": "blockdev-add", "arguments": { "driver": "compress", "file": "node0", "node-name": "node1" } } > {"execute": "block-stream", "arguments": { "job-id": "stream0", "device": "node1" } } > EOF Originally-by: Stefan Reiter <s.reiter@proxmox.com> Signed-off-by: Thomas Lamprecht <t.lamprecht@proxmox.com> [FE: do update bytes and offset in any case add reproducer to commit message] Signed-off-by: Fiona Ebner <f.ebner@proxmox.com> Message-ID: <20240322095009.346989-2-f.ebner@proxmox.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> (cherry picked from commit 3f934817c82c2f1bf1c238f8d1065a3be10a3c9e) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-03-27vdpa-dev: Fix initialisation order to restore VDUSE compatibilityKevin Wolf
VDUSE requires that virtqueues are first enabled before the DRIVER_OK status flag is set; with the current API of the kernel module, it is impossible to enable the opposite order in our block export code because userspace is not notified when a virtqueue is enabled. This requirement also mathces the normal initialisation order as done by the generic vhost code in QEMU. However, commit 6c482547 accidentally changed the order for vdpa-dev and broke access to VDUSE devices with this. This changes vdpa-dev to use the normal order again and use the standard vhost callback .vhost_set_vring_enable for this. VDUSE devices can be used with vdpa-dev again after this fix. vhost_net intentionally avoided enabling the vrings for vdpa and does this manually later while it does enable them for other vhost backends. Reflect this in the vhost_net code and return early for vdpa, so that the behaviour doesn't change for this device. Cc: qemu-stable@nongnu.org Fixes: 6c4825476a43 ('vdpa: move vhost_vdpa_set_vring_ready to the caller') Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-ID: <20240315155949.86066-1-kwolf@redhat.com> Reviewed-by: Eugenio Pérez <eperezma@redhat.com> Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> (cherry picked from commit 2c66de61f88dc9620a32239f7dd61524a57f66b0) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-03-25target/s390x: Use mutable temporary value for op_tsIdo Plat
Otherwise TCG would assume the register that holds t1 would be constant and reuse whenever it needs the value within it. Cc: qemu-stable@nongnu.org Fixes: f1ea739bd598 ("target/s390x: Use tcg_constant_* in local contexts") Reviewed-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> [iii: Adjust a newline and capitalization, add tags] Signed-off-by: Ido Plat <ido.plat@ibm.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: David Hildenbrand <david@redhat.com> Message-ID: <20240318202722.20675-1-iii@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com> (cherry picked from commit 272fba9779af0bb1c29cd30302fc1e31c59274d0) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-03-25target/loongarch: Fix qemu-system-loongarch64 assert failed with the option ↵Song Gao
'-d int' qemu-system-loongarch64 assert failed with the option '-d int', the helper_idle() raise an exception EXCP_HLT, but the exception name is undefined. Signed-off-by: Song Gao <gaosong@loongson.cn> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20240321123606.1704900-1-gaosong@loongson.cn> (cherry picked from commit 1590154ee4376819a8c6ee61e849ebf4a4e7cd02) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-03-22docs/conf.py: Remove usage of distutilsThomas Huth
The macOS jobs in our CI recently started failing, complaining that the distutils module is not available anymore. And indeed, according to https://peps.python.org/pep-0632/ it's been deprecated since a while and now likely got removed in recent Python versions. Fortunately, we only use it for a version check via LooseVersion here which we don't really need anymore - according to Repology.org, these are the versions of sphinx-rtd-theme that are currently used by the various distros: centos_stream_8: 0.3.1 centos_stream_9: 0.5.1 fedora_38: 1.1.1 fedora_39: 1.2.2 freebsd: 1.0.0 haikuports_master: 1.2.1 openbsd: 1.2.2 opensuse_leap_15_5: 0.5.1 pkgsrc_current: 2.0.0 debian_11: 0.5.1 debian_12: 1.2.0 ubuntu_20_04: 0.4.3 ubuntu_22_04: 1.0.0 ubuntu_24_04: 2.0.0 So except for CentOS 8, all distros are using a newer version of sphinx-rtd-theme, and for CentOS 8 we don't support compiling with the Sphinx of the distro anymore anyway, since it's based on the Python 3.6 interpreter there. For compiling on CentOS 8, you have to use the alternative Python 3.8 interpreter which comes without Sphinx, so that needs the Sphinx installed via pip in the venv instead, and that is using a newer version, too, according to our pythondeps.toml file. Thus we can simply drop the version check now to get rid of the distutils dependency here. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Message-id: 20240304130403.129543-1-thuth@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org> (cherry picked from commit eb844330bd36ebdd4959053da08069d1e5d49119) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-03-22target/loongarch: Fix qemu-loongarch64 hang when executing 'll.d $t0, $t0, 0'Song Gao
On gen_ll, if a->imm is zero, make_address_x return src1, but the load to destination may clobber src1. We use a new destination to fix this problem. Fixes: c5af6628f4be (target/loongarch: Extract make_address_i() helper) Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Suggested-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Song Gao <gaosong@loongson.cn> Message-Id: <20240320013955.1561311-1-gaosong@loongson.cn> (cherry picked from commit 77642f92c0b71a105aba2a4d03bc62328eae703b) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-03-22target/hppa: fix do_stdby_e()Sven Schnelle
stdby,e,m was writing data from the wrong half of the register into memory for cases 0-3. Fixes: 25460fc5a71 ("target/hppa: Implement STDBY") Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20240319161921.487080-7-svens@stackframe.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> (cherry picked from commit 518d2f4300e5c50a3e6416fd46e58373781a5267) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-03-22target/hppa: mask privilege bits in mfiaSven Schnelle
mfia should return only the iaoq bits without privilege bits. Fixes: 98a9cb792c8 ("target-hppa: Implement system and memory-management insns") Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Helge Deller <deller@gmx.de> Message-Id: <20240319161921.487080-6-svens@stackframe.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> (cherry picked from commit b5e0b3a53c983c4a9620a44a6a557b389e589218) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-03-22target/hppa: exit tb on flush cache instructionsSven Schnelle
When the guest modifies the tb it is currently executing from, it executes a fic instruction. Exit the tb on such instruction, otherwise we might execute stale code. Signed-off-by: Sven Schnelle <svens@stackframe.org> Message-Id: <20240319161921.487080-5-svens@stackframe.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> (cherry picked from commit ad1fdacd1b936557514dd72c2079a80be0c2dfb4) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-03-22target/hppa: fix access_id checkSven Schnelle
PA2.0 provides 8 instead of 4 PID registers. Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20240319161921.487080-4-svens@stackframe.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> (cherry picked from commit ae157fc25053917830c3b581bc282f906e6d95d3) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-03-22target/hppa: fix shrp for wide modeSven Schnelle
Fixes: f7b775a9c075 ("target/hppa: Implement SHRPD") Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Helge Deller <deller@gmx.de> Message-Id: <20240319161921.487080-3-svens@stackframe.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> (cherry picked from commit d37fad0ae5bd2c544fdb0f2eff6acdb28a155be0) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-03-22target/hppa: ldcw,s uses static shift of 3Sven Schnelle
Fixes: 96d6407f363 ("target-hppa: Implement loads and stores") Signed-off-by: Sven Schnelle <svens@stackframe.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20240319161921.487080-2-svens@stackframe.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> (cherry picked from commit c3ea1996a14d5dbbedb3f9036f7ebec4395dc889) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-03-22target/hppa: Fix assemble_12a insns for wide modeRichard Henderson
Tested-by: Helge Deller <deller@gmx.de> Reported-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> (cherry picked from commit 46174e140d274385b1255bc7f16a5a711853053f) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-03-22target/hppa: Fix assemble_11a insns for wide modeRichard Henderson
Tested-by: Helge Deller <deller@gmx.de> Reviewed-by: Helge Deller <deller@gmx.de> Reported-by: Sven Schnelle <svens@stackframe.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> (cherry picked from commit 4768c28edd4097ebef42822e15b4a43026b15376) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-03-22target/hppa: Fix assemble_16 insns for wide modeRichard Henderson
Reported-by: Sven Schnelle <svens@stackframe.org> Reviewed-by: Helge Deller <deller@gmx.de> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> (cherry picked from commit 72bace2d13cb427fde3bb50ae1a71a2abe9acc0f) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-03-21target/i386: Revert monitor_puts() in do_inject_x86_mce()Tao Su
monitor_puts() doesn't check the monitor pointer, but do_inject_x86_mce() may have a parameter with NULL monitor pointer. Revert monitor_puts() in do_inject_x86_mce() to fix, then the fact that we send the same message to monitor and log is again more obvious. Fixes: bf0c50d4aa85 (monitor: expose monitor_puts to rest of code) Reviwed-by: Xiaoyao Li <xiaoyao.li@intel.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Tao Su <tao1.su@linux.intel.com> Message-ID: <20240320083640.523287-1-tao1.su@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> (cherry picked from commit 7fd226b04746f0be0b636de5097f1b42338951a0) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-03-21ui: compile dbus-display1.c with -fPIC as necessaryMarc-André Lureau
Building dbus-display1.c explicitly as a static library drops -fPIC by default, which may not be correct if it ends up linked to a shared library. Let the target decide how to build the unit, with or without -fPIC. This makes commit 186acfbaf7 ("tests/qtest: Depend on dbus_display1_dep") no longer relevant, as dbus-display1.c will be recompiled. Fixes: c172136ea33 ("meson: ensure dbus-display generated code is built before other units") Reported-by: Olaf Hering <olaf@aepfle.de> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> (cherry picked from commit d4069a84a3380247c1b524096c6a807743bf687a)
2024-03-21Revert "chardev/char-socket: Fix TLS io channels sending too much data to ↵Daniel P. Berrangé
the backend" This commit results in unexpected termination of the TLS connection. When 'fd_can_read' returns 0, the code goes on to pass a zero length buffer to qio_channel_read. The TLS impl calls into gnutls_recv() with this zero length buffer, at which point GNUTLS returns an error GNUTLS_E_INVALID_REQUEST. This is treated as fatal by QEMU's TLS code resulting in the connection being torn down by the chardev. Simply skipping the qio_channel_read when the buffer length is zero is also not satisfactory, as it results in a high CPU burn busy loop massively slowing QEMU's functionality. The proper solution is to avoid tcp_chr_read being called at all unless the frontend is able to accept more data. This will be done in a followup commit. This reverts commit 462945cd22d2bcd233401ed3aa167d83a8e35b05 Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> (cherry picked from commit e8ee827ffdb86ebbd5f5213a1f78123c25a90864) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-03-21target/i386: fix direction of "32-bit MMU" testPaolo Bonzini
The low bit of MMU indices for x86 TCG indicates whether the processor is in 32-bit mode and therefore linear addresses have to be masked to 32 bits. However, the index was computed incorrectly, leading to possible conflicts in the TLB for any address above 4G. Analyzed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> Fixes: b1661801c18 ("target/i386: Fix physical address truncation", 2024-02-28) Fixes: a28b6b4e743 ("target/i386: Fix physical address truncation" in stable-8.2) Cc: qemu-stable@nongnu.org Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2206 Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> (cherry picked from commit 2cc68629a6fc198f4a972698bdd6477f883aedfb) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> (Mjt: move changes for x86_cpu_mmu_index() to cpu_mmu_index() due to missing v8.2.0-1030-gace0c5fe59 "target/i386: Populate CPUClass.mmu_index")
2024-03-21target/i386: use separate MMU indexes for 32-bit accessesPaolo Bonzini
Accesses from a 32-bit environment (32-bit code segment for instruction accesses, EFER.LMA==0 for processor accesses) have to mask away the upper 32 bits of the address. While a bit wasteful, the easiest way to do so is to use separate MMU indexes. These days, QEMU anyway is compiled with a fixed value for NB_MMU_MODES. Split MMU_USER_IDX, MMU_KSMAP_IDX and MMU_KNOSMAP_IDX in two. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> (cherry picked from commit 90f641531c782c873a05895f411c05fbbbef3c49) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> (Mjt: move changes for x86_cpu_mmu_index() to cpu_mmu_index() due to missing v8.2.0-1030-gace0c5fe59 "target/i386: Populate CPUClass.mmu_index")
2024-03-21target/i386: introduce function to query MMU indicesPaolo Bonzini
Remove knowledge of specific MMU indexes (other than MMU_NESTED_IDX and MMU_PHYS_IDX) from mmu_translate(). This will make it possible to split 32-bit and 64-bit MMU indexes. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> (cherry picked from commit 5f97afe2543f09160a8d123ab6e2e8c6d98fa9ce) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> (Mjt: context fixup in target/i386/cpu.h due to other changes in that area)
2024-03-20tests/unit: Bump test-replication timeout to 60 secondsKevin Wolf
We're seeing timeouts for this test on CI runs (specifically for ubuntu-20.04-s390x-all). It doesn't fail consistently, but even the successful runs take about 27 or 28 seconds, which is not very far from the 30 seconds timeout. Bump the timeout a bit to make failure less likely even on this CI host. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-ID: <20240125165803.48373-1-kwolf@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> (cherry picked from commit 63b18312d14ac984acaf13c7c55d9baa2d61496e) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-03-20tests/unit: Bump test-crypto-block test timeout to 5 minutesThomas Huth
When running the tests in slow mode on a very loaded system and with --enable-debug, the test-crypto-block can take longer than 4 minutes. Bump the timeout to 5 minutes to make sure that it also passes in such situations. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20231215070357.10888-15-thuth@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> (cherry picked from commit e1b363e328d559cd5f86d3d1d7b84d0154e153d3) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-03-20tests/unit: Bump test-aio-multithread test timeout to 2 minutesThomas Huth
When running the tests in slow mode on a very loaded system and with --enable-debug, the test-aio-multithread can take longer than 1 minute. Bump the timeout to two minutes to make sure that it also passes in such situations. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <20231215070357.10888-14-thuth@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> (cherry picked from commit c45f8f1aef35730a2dcf3cabe296ac12965db43d) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2024-03-19iotests: Add test for reset/AioContext switches with NBD exportsKevin Wolf
This replicates the scenario in which the bug was reported. Unfortunately this relies on actually executing a guest (so that the firmware initialises the virtio-blk device and moves it to its configured iothread), so this can't make use of the qtest accelerator like most other test cases. I tried to find a different easy way to trigger the bug, but couldn't find one. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-ID: <20240314165825.40261-3-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> (cherry picked from commit e8fce34eccf68a32f4ecf2c6f121ff2ac383d6bf) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-15 01:23:07 +0000