aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-01-08target-mips: Replace macros by inline functionsStefan Weil
The macros RESTORE_ROUNDING_MODE and RESTORE_FLUSH_MODE silently used variable env from their callers. Using inline functions with env passed as a function argument is more transparent. This modification was proposed by Peter Maydell. Cc: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Eric Johnson <ericj@mips.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-01-08target-mips: Allow DSP access to be disabled once enabled.Eric Johnson
Clear the DSP hflags at the start of compute_hflags. Otherwise access is not properly disabled once enabled. Signed-off-by: Eric Johnson <ericj@mips.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-01-08linux-user: fix mips 32-on-64 prealloc caseAlexander Graf
MIPS only supports 31 bits of virtual address space for user space, so let's make sure we stay within that limit with our preallocated memory block. This fixes the MIPS user space targets when executed without command line option. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2013-01-06Revert "virtio-pci: replace byte swap hack"Blue Swirl
This reverts commit 9807caccd605d09a72495637959568d690e10175. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-01-06virtio-pci: replace byte swap hackBlue Swirl
Remove byte swaps by declaring the config space as native endian. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-01-06tests: add gcov supportBlue Swirl
Add support for compiling for GCOV test coverage, enabled with '--enable-gcov' during configure. Test coverage will be reported after each test. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-01-05hw/i386: Fix broken build for non POSIX hostsStefan Weil
pc-testdev.c cannot be compiled with MinGW (and other non POSIX hosts): CC i386-softmmu/hw/i386/../pc-testdev.o qemu/hw/i386/../pc-testdev.c:38:22: warning: sys/mman.h: file not found qemu/hw/i386/../pc-testdev.c: In function ‘test_flush_page’: qemu/hw/i386/../pc-testdev.c:103: warning: implicit declaration of function ‘mprotect’ ... Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-01-05softfloat: Implement uint64_to_float128Richard Henderson
Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-01-05softfloat: Fix uint64_to_float64Richard Henderson
The interface to normalizeRoundAndPackFloat64 requires that the high bit be clear. Perform one shift-right-and-jam if needed. Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2013-01-04Merge remote-tracking branch 'stefanha/trivial-patches' into stagingAnthony Liguori
* stefanha/trivial-patches: spice: drop incorrect vm_change_state_handler() opaque linux-user/syscall.c: remove forward declarations hw/mcf5206: Reduce size of lookup table Remove --sparc_cpu option from the configure list pseries: Remove unneeded include statement (fixes MinGW builds) pc_sysfw: Check for qemu_find_file() failure Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-04Merge remote-tracking branch 'kraxel/testdev.1' into stagingAnthony Liguori
* kraxel/testdev.1: pc: remove bochs bios debug ports hw: Add test device for unittests execution add isa-debug-exit device. switch debugcon to memory api Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-04Merge remote-tracking branch 'kraxel/acpi.2' into stagingAnthony Liguori
* kraxel/acpi.2: apci: assign memory regions to ich9 lpc device apci: assign memory regions to piix4 acpi device acpi: autoload dsdt configure: also symlink *.aml files Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-04spice: drop incorrect vm_change_state_handler() opaqueStefan Hajnoczi
The spice_server pointer is a global variable and vm_change_state_handler() therefore does not use its opaque parameter. The vm change state handler is added with a pointer to the spice_server pointer. This is useless and we probably would not want 2 levels of pointers. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Uri Lublin <uril@redhat.com>
2013-01-04linux-user/syscall.c: remove forward declarationsJohn Spencer
instead use the correct headers that define these functions. Requested-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: John Spencer <maillist-qemu@barfooze.de> Reviewed-by: Amos Kong <kongjianjun@gmail.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-04hw/mcf5206: Reduce size of lookup tableStefan Weil
This typically reduces the size from 512 bytes to 128 bytes. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-04Remove --sparc_cpu option from the configure list陳韋任 (Wei-Ren Chen)
commit 9b9c37c36439ee0452632253dac7a31897f27f70 always assume sparcv9, the others are no longer supported. Remove --sparc_cpu option from the configure list. Signed-off-by: Chen Wei-Ren <chenwj@iis.sinica.edu.tw> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-04pseries: Remove unneeded include statement (fixes MinGW builds)Stefan Weil
sys/mman.h is not needed (tested on Linux) and unavailable for MinGW, so remove it. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-04pc_sysfw: Check for qemu_find_file() failureMarkus Armbruster
pc_fw_add_pflash_drv() ignores qemu_find_file() failure, and happily creates a drive without a medium. When pc_system_flash_init() asks for its size, bdrv_getlength() fails with -ENOMEDIUM, which isn't checked either. It fails relatively cleanly only because -ENOMEDIUM isn't a multiple of 4096: $ qemu-system-x86_64 -S -vnc :0 -bios nonexistant qemu: PC system firmware (pflash) must be a multiple of 0x1000 [Exit 1 ] Fix by handling the qemu_find_file() failure. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-04pc: remove bochs bios debug portsGerd Hoffmann
Prehistoric leftover, zap it. We poweroff via acpi these days. And having a port (0x501,0x502) where any random guest write will make qemu exit -- with no way to turn it off -- is a bad joke anyway. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-01-04hw: Add test device for unittests executionLucas Meneghel Rodrigues
Add a test device which supports the kvmctl ioports, so one can run the KVM unittest suite. Intended Usage: qemu-system-x86_64 -nographic \ -device pc-testdev \ -device isa-debug-exit,iobase=0xf4,iosize=0x04 \ -kernel /path/to/kvm/unittests/msr.flat Where msr.flat is one of the KVM unittests, present on a separate repo, git://git.kernel.org/pub/scm/virt/kvm/kvm-unit-tests.git [ kraxel: more memory api + qom fixes ] CC: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Lucas Meneghel Rodrigues <lmr@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-01-04add isa-debug-exit device.Gerd Hoffmann
When present it makes qemu exit on any write. Mapped to port 0x501 by default. Without this patch Anthony doesn't allow me to remove the bochs bios debug ports because his test suite uses this. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-01-04switch debugcon to memory apiGerd Hoffmann
Also some QOM glue while being at it. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-01-04apci: assign memory regions to ich9 lpc deviceGerd Hoffmann
Get rid of get_system_io() usage. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-01-04apci: assign memory regions to piix4 acpi deviceGerd Hoffmann
Get rid of get_system_io() usage. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-01-04acpi: autoload dsdtGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-01-04configure: also symlink *.aml filesGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2013-01-03pty: unbreak libvirtGerd Hoffmann
Commit 586502189edf9fd0f89a83de96717a2ea826fdb0 breaks libvirt pty support because it tried to figure the pts name from stderr output. Fix this by moving the label to the end of the line, this way the libvirt parser does still recognise the message. libvirt looks for "char device redirected to ${ptsname}<whitespace>". Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-03dataplane: use linux-headers/ for virtio includesStefan Hajnoczi
The hw/dataplane/vring.c code includes linux/virtio_ring.h. Ensure that we use linux-headers/ instead of the system-wide headers, which may be out-of-date on older distros. This resolves the following build error on Debian 6: CC hw/dataplane/vring.o cc1: warnings being treated as errors hw/dataplane/vring.c: In function 'vring_enable_notification': hw/dataplane/vring.c:71: error: implicit declaration of function 'vring_avail_event' hw/dataplane/vring.c:71: error: nested extern declaration of 'vring_avail_event' hw/dataplane/vring.c:71: error: lvalue required as left operand of assignment Note that we now build dataplane/ for each target instead of only once. There is no way around this since linux-headers/ is only available for per-target objects - and it's how virtio, vfio, kvm, and friends are built. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-02configure: Write new file "config-all-disas.mak" when running configureStefan Weil
Incremental builds added new lines to that file each time when configure was run. Now a new file with a comment line is written. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-02tci: Fix broken builds with TCG interpreterStefan Weil
TCI no longer compiled after commit 76cad71136b7eb371cf2a2a4e1621cfe8d9c769a. The TCI disassembler depends on data structures which are different for each QEMU target, so it cannot be compiled as a universal-obj today. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-02savevm.c: cleanup system includesMichael Tokarev
savevm.c suffers from the same problem as some other files. Some years ago savevm.c was created from vl.c, moving some code from there into a separate file. At that time, all includes were just copied from vl.c to savevm.c, without checking which ones are needed and which are not. But actually most of that stuff is _not_ needed. More, some stuff is wrong, for example, *BSD #ifdef'ery around <util.h> vs <libutil.h> - for one, it fails to build on Debian/kFreebsd. Just remove all this. Maybe there's a possibility to clean it up further - like removing <windows.h> (and maybe including winsock.h for htons etc), and maybe it's possible to remove some internal #includes too, but I didn't check this. While at it, remove duplicate #include of qemu/timer.h. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-02disallow -daemonize usage of stdio (curses display, -nographic, -serial ↵Michael Tokarev
stdio etc) Curses display requires stdin/out to stay on the terminal, so -daemonize makes no sense in this case. Instead of leaving display uninitialized like is done since 995ee2bf469de6bb, explicitly detect this case earlier and error out. -nographic can actually be used with -daemonize, by redirecting everything to a null device, but the problem is that according to documentation and historical behavour, -nographic redirects guest ports to stdin/out, which, again, makes no sense in case of -daemonize. Since -nographic is a legacy option, don't bother fixing this case (to allow -nographic and -daemonize by redirecting guest ports to null instead of stdin/out in this case), but disallow it completely instead, to stop garbling host terminal. If no display display needed and user wants to use -nographic, the right way to go is to use -serial null -parallel null -monitor none -display none -vga none instead of -nographic. Also prevent the same issue -- it was possible to get garbled host tty after -nographic -daemonize and it is still possible to have it by using -serial stdio -daemonize Fix this by disallowing opening stdio chardev when -daemonize is specified. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-02Merge remote-tracking branch 'stefanha/block' into stagingAnthony Liguori
* stefanha/block: sheepdog: pass oid directly to send_pending_req() sheepdog: don't update inode when create_and_write fails block/raw-win32: Fix compiler warnings (wrong format specifiers) qemu-img: report size overflow error message cutils: change strtosz_suffix_unit function virtio-blk: Return UNSUPP for unknown request types virtio-blk: add x-data-plane=on|off performance feature dataplane: add virtio-blk data plane code virtio-blk: restore VirtIOBlkConf->config_wce flag iov: add qemu_iovec_concat_iov() test-iov: add iov_discard_front/back() testcases iov: add iov_discard_front/back() to remove data dataplane: add Linux AIO request queue dataplane: add event loop dataplane: add virtqueue vring code dataplane: add host memory mapping code configure: add CONFIG_VIRTIO_BLK_DATA_PLANE raw-posix: add raw_get_aio_fd() for virtio-blk-data-plane Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-02tcg: Remove unneeded assertionStefan Weil
Commit 7f6f0ae5b95adfa76e10eabe2c34424a955fd10c added two assertions. One of these assertions is not needed: The pointer ts is never NULL because it is initialized with the address of an array element. Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2013-01-02sheepdog: pass oid directly to send_pending_req()Liu Yuan
Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Cc: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Liu Yuan <tailai.ly@taobao.com> Reviewed-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-02sheepdog: don't update inode when create_and_write failsLiu Yuan
For the error case such as SD_RES_NO_SPACE, we shouldn't update the inode bitmap to avoid the scenario that the object is allocated but wasn't created at the server side. This will result in VM's IO error on the failed object. Cc: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Cc: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Liu Yuan <tailai.ly@taobao.com> Reviewed-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-02block/raw-win32: Fix compiler warnings (wrong format specifiers)Stefan Weil
Commit fbcad04d6bfdff937536eb23088a01a280a1a3af added fprintf statements with wrong format specifiers. GetLastError() returns a DWORD which is unsigned long, so %lu must be used. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-02qemu-img: report size overflow error messageliguang
qemu-img will complain when qcow or qcow2 size overflow for 64 bits, report the right message in this condition. $./qemu-img create -f qcow2 /tmp/foo 0x10000000000000000 before change: qemu-img: Invalid image size specified! You may use k, M, G or T suffixes for qemu-img: kilobytes, megabytes, gigabytes and terabytes. after change: qemu-img: Image size must be less than 8 EiB! [Resolved conflict with a9300911 goto removal -- Stefan] Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-02cutils: change strtosz_suffix_unit functionliguang
if value to be translated is larger than INT64_MAX, this function will not be convenient for caller to be aware of it, so change a little for this. Signed-off-by: liguang <lig.fnst@cn.fujitsu.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-02virtio-blk: Return UNSUPP for unknown request typesAlexey Zaytsev
Currently, all unknown requests are treated as VIRTIO_BLK_T_IN Signed-off-by: Alexey Zaytsev <alexey.zaytsev@gmail.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-02virtio-blk: add x-data-plane=on|off performance featureStefan Hajnoczi
The virtio-blk-data-plane feature is easy to integrate into hw/virtio-blk.c. The data plane can be started and stopped similar to vhost-net. Users can take advantage of the virtio-blk-data-plane feature using the new -device virtio-blk-pci,x-data-plane=on property. The x-data-plane name was chosen because at this stage the feature is experimental and likely to see changes in the future. If the VM configuration does not support virtio-blk-data-plane an error message is printed. Although we could fall back to regular virtio-blk, I prefer the explicit approach since it prompts the user to fix their configuration if they want the performance benefit of virtio-blk-data-plane. Limitations: * Only format=raw is supported * Live migration is not supported * Block jobs, hot unplug, and other operations fail with -EBUSY * I/O throttling limits are ignored * Only Linux hosts are supported due to Linux AIO usage Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-02dataplane: add virtio-blk data plane codeStefan Hajnoczi
virtio-blk-data-plane is a subset implementation of virtio-blk. It only handles read, write, and flush requests. It does this using a dedicated thread that executes an epoll(2)-based event loop and processes I/O using Linux AIO. This approach performs very well but can be used for raw image files only. The number of IOPS achieved has been reported to be several times higher than the existing virtio-blk implementation. Eventually it should be possible to unify virtio-blk-data-plane with the main body of QEMU code once the block layer and hardware emulation is able to run outside the global mutex. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-02virtio-blk: restore VirtIOBlkConf->config_wce flagStefan Hajnoczi
Two slightly different versions of a patch to conditionally set VIRTIO_BLK_F_CONFIG_WCE through the "config-wce" qdev property have been applied (ea776abca and eec7f96c2). David Gibson <david@gibson.dropbear.id.au> noticed that the "config-wce" property is broken as a result and fixed it recently. The fix sets the host_features VIRTIO_BLK_F_CONFIG_WCE bit from a qdev property. Unfortunately, the virtio device then has no chance to test for the presence of the feature bit during virtio_blk_init(). Therefore, reinstate the VirtIOBlkConf->config_wce flag. Drop the duplicate qdev property to set the host_features bit. The VirtIOBlkConf->config_wce flag will be used by virtio-blk-data-plane in a later patch. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-02iov: add qemu_iovec_concat_iov()Stefan Hajnoczi
The qemu_iovec_concat() function copies a subset of a QEMUIOVector. The new qemu_iovec_concat_iov() function does the same for a iov/cnt pair. It is easy to define qemu_iovec_concat() in terms of qemu_iovec_concat_iov(). The existing code is mostly unchanged, except for the assertion src->size >= soffset, which cannot be efficiently checked upfront on a iov/cnt pair. Instead we assert upon hitting the end of src with an unsatisfied soffset. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-02test-iov: add iov_discard_front/back() testcasesStefan Hajnoczi
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-02iov: add iov_discard_front/back() to remove dataStefan Hajnoczi
The iov_discard_front/back() functions remove data from the front or back of the vector. This is useful when peeling off header/footer structs. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-02dataplane: add Linux AIO request queueStefan Hajnoczi
The IOQueue has a pool of iocb structs and a function to add new read/write requests. Multiple requests can be added before calling the submit function to actually tell the host kernel to begin I/O. This allows callers to batch requests and submit them in one go. The actual I/O is performed using Linux AIO. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-02dataplane: add event loopStefan Hajnoczi
Outside the safety of the global mutex we need to poll on file descriptors. I found epoll(2) is a convenient way to do that, although other options could replace this module in the future (such as an AioContext-based loop or glib's GMainLoop). One important feature of this small event loop implementation is that the loop can be terminated in a thread-safe way. This allows QEMU to stop the data plane thread cleanly. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-02dataplane: add virtqueue vring codeStefan Hajnoczi
The virtio-blk-data-plane cannot access memory using the usual QEMU functions since it executes outside the global mutex and the memory APIs are this time are not thread-safe. This patch introduces a virtqueue module based on the kernel's vhost vring code. The trick is that we map guest memory ahead of time and access it cheaply outside the global mutex. Once the hardware emulation code can execute outside the global mutex it will be possible to drop this code. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-01-02dataplane: add host memory mapping codeStefan Hajnoczi
The data plane thread needs to map guest physical addresses to host pointers. Normally this is done with cpu_physical_memory_map() but the function assumes the global mutex is held. The data plane thread does not touch the global mutex and therefore needs a thread-safe memory mapping mechanism. Hostmem registers a MemoryListener similar to how vhost collects and pushes memory region information into the kernel. There is a fine-grained lock on the regions list which is held during lookup and when installing a new regions list. When the physical memory map changes the MemoryListener callbacks are invoked. They build up a new list of memory regions which is finally installed when the list has been completed. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>