| Age | Commit message (Collapse) | Author |
|---|
|
Use target address rather than host address when performing
non-GOT relocations
Signed-off-by: Corey J. Boyle <corey@kansanian.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Implement timer_create, timer_settime, timer_gettime, timer_getoverrun
and timer_delete.
Signed-off-by: Erik de Castro Lopo <erikd@mega-nerd.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Signed-off-by: Erik de Castro Lopo <erikd@mega-nerd.com>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
|
|
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
|
|
Performing multiple drive-mirror blockjobs on the same qemu instance
results in the image file used for the block device being replaced by
the newly mirrored file, which is not what we want.
Fix this by performing one dedicated test per sync mode.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1385407736-13941-3-git-send-email-mreitz@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
|
|
For "none" sync mode in "absolute-paths" mode, the current image should
be used as the backing file for the newly created image.
The current behavior is:
a) If the image to be mirrored has a backing file, use that (which is
wrong, since the operations recorded by "none" are applied to the
image itself, not to its backing file).
b) If the image to be mirrored lacks a backing file, the target doesn't
have one either (which is not really wrong, but not really right,
either; "none" records a set of operations executed on the image
file, therefore having no backing file to apply these operations on
seems rather pointless).
For a, this is clearly a bugfix. For b, it is still a bugfix, although
it might break existing API - but since that case crashed qemu just
three weeks ago (before 1452686495922b81d6cf43edf025c1aef15965c0), we
can safely assume there is no such API relying on that case yet.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1385407736-13941-2-git-send-email-mreitz@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
|
|
|
|
Don't run code in the signal handler, only set a flag.
Use sigaction(2) to avoid non-portable signal(2) semantics.
Make #ifdefs less messy.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1385130903-20531-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
|
|
Both code locations cause a compiler warning. Using "%s" instead of "%lu"
would result in a program crash if the wrong code were executed.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Message-id: 1385409257-2522-1-git-send-email-sw@weilnetz.de
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
|
|
The default granularity for the FIT timer on 440 is on every 0x1000th
transition of TB from 0 to 1. Translated that means 48828 times a second.
Since interrupts are quite expensive for 440 and we don't really care
about the accuracy of the FIT to that significance, let's force FIT and
WDT to at best millisecond granularity.
This basically restores behavior as it was in QEMU 1.6, where timers
could only deal with millisecond granularities at all.
This patch greatly improves performance with the 440 target and restores
roughly the same performance level that QEMU 1.6 had for me.
Signed-off-by: Alexander Graf <agraf@suse.de>
Message-id: 1385416015-22775-3-git-send-email-agraf@suse.de
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
|
|
Today we fire FIT and WDT timer events every time the respective bit
position in TB flips from 0 -> 1.
However, there is no need to do this if the end result would be that
we're changing a TSR bit that is set to 1 to 1 again. No guest visible
change would have occured.
So whenever we see that the TSR bit to our timer is already set, don't
even bother to update the timer that would potentially fire it off.
However, we do need to make sure that we update our timer that notifies
us of the TB flip when the respective TSR bit gets unset. In that case
we do care about the flip and need to notify the guest again. So add
a callback into our timer handlers when TSR bits get unset.
This improves performance for me when the guest is busy processing things.
Signed-off-by: Alexander Graf <agraf@suse.de>
Message-id: 1385416015-22775-2-git-send-email-agraf@suse.de
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
|
|
glib < 2.22 does not have g_array_get_element_size,
limit it's use (to check all elements are 1 byte
in size) to newer glib.
This fixes build on RHEL 5.3.
Reported-by: Richard Henderson <rth@redhat.com>
Reported-by: Erik Rull <erik.rull@rdsoftware.de>
Tested-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20131125220039.GA16386@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
|
|
pc very last minute fixes for 1.7
This has a fix for a crasher bug with pci bridges,
boot failure fix for s390 on 32 bit hosts,
and fixes build for hosts with old glib.
There's also a fix for --iasl configure flag - it can be used
to work around broken iasl on some systems either
by using a non-standard iasl or by disabling it.
I've also reverted a e1000/rtl mac programming change
that seems slightly wrong and too risky for 1.8.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 25 Nov 2013 03:40:07 AM PST using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin (5) and Bandan Das (1)
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
configure: make --iasl option actually work
Revert "e1000/rtl8139: update HMP NIC when every bit is written"
acpi-build: fix build on glib < 2.14
acpi-build: fix build on glib < 2.22
pci: unregister vmstate_pcibus on unplug
s390x: fix flat file load on 32 bit systems
Message-id: 1385379990-32093-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
|
|
Here are a bunch of 1.7-tagged patches that I was afraid
were getting forgotten or that did not have a clear maintainer responsible
for making a pull request.
# gpg: Signature made Thu 21 Nov 2013 08:40:59 AM PST using RSA key ID 9B4D86F2
# gpg: Can't check signature: public key not found
# By Peter Maydell (3) and others
# Via Paolo Bonzini
* bonzini/tags/for-anthony:
qga: Fix compiler warnings (missing format attribute, wrong format strings)
mips jazz: do not raise data bus exception when accessing invalid addresses
target-i386: yield to another VCPU on PAUSE
rng-egd: offset the point when repeatedly read from the buffer
rng-egd: remove redundant free
target-i386: Fix build by providing stub kvm_arch_get_supported_cpuid()
vfio-pci: Fix multifunction=on
atomic.h: Fix build with clang
pc: get rid of builtin pvpanic for "-M pc-1.5"
configure: Explicitly set ARFLAGS so we can build with GNU Make 4.0
sun4m: Add FCode ROM for TCX framebuffer
Message-id: 1385052578-32352-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
|
|
# By Tomoki Sekiyama
# Via Michael Roth
* mdroth/qga-pull-2013-11-22:
qemu-ga: vss-win32: Install VSS provider COM+ application service
Message-id: 1385154505-15145-1-git-send-email-mdroth@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
|
|
# By Vlad Yasevich
# Via Stefan Hajnoczi
* stefanha/net:
qdev-properties-system.c: Allow vlan or netdev for -device, not both
Message-id: 1385118544-28482-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
|
|
--iasl option was added to CC option parsing section by mistake,
it's not effective there and attempts to use cause
an 'unknown option' error.
Fix this up.
Tested-by: Marcel Apfelbaum <marcel.a@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
Currently, qemu-ga for Windows fails to execute guset-fsfreeze-freeze when
no user is logging in to Windows, with an error message:
{"error":{"class":"GenericError",
"desc":"failed to add C:\\ to snapshotset: (error: 8004230f)"}}
To enable guest-fsfreeze-freeze/thaw without logging in users, this installs
a service to execute qemu-ga VSS provider COM+ application that has full
access privileges to the local system. The service will automatically be
removed when the COM+ application is deregistered.
This patch replaces ICOMAdminCatalog interface with ICOMAdminCatalog2
interface that contains CreateServiceForApplication() method in addition.
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Gal Hammer <ghammer@redhat.com>
Reviewed-by: Yan Vugenfirer <yvugenfi@redhat.com>
Tested-by: Yan Vugenfirer <yvugenfi@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
|
|
It is currently possible to specify things like:
-device e1000,netdev=foo,vlan=1
With this usage, whichever argument was specified last (vlan or netdev)
overwrites what was previousely set and results in a non-working
configuration. Even worse, when used with multiqueue devices,
it causes a segmentation fault on exit in qemu_free_net_client.
That patch treates the above command line options as invalid and
generates an error at start-up.
Signed-off-by: Vlad Yasevich <vyasevic@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
gcc 4.8.2 reports this warning when extra warnings are enabled (-Wextra):
CC qga/commands.o
qga/commands.c: In function ‘slog’:
qga/commands.c:28:5: error:
function might be possible candidate for ‘gnu_printf’ format attribute [-Werror=suggest-attribute=format]
g_logv("syslog", G_LOG_LEVEL_INFO, fmt, ap);
^
gcc 4.8.2 reports this warning when slog is declared with the
gnu_printf format attribute:
qga/commands-posix.c: In function ‘qmp_guest_file_open’:
qga/commands-posix.c:404:5: warning:
format ‘%d’ expects argument of type ‘int’, but argument 2 has type ‘int64_t’ [-Wformat=]
slog("guest-file-open, handle: %d", handle);
^
On 32 bit hosts there are three more warnings which are also fixed here.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
MIPS Jazz chipset doesn't seem to raise data bus exceptions on invalid accesses.
However, there is no easy way to prevent them. Creating a big memory region
for the whole address space doesn't prevent memory core to directly call
unassigned_mem_read/write which in turn call cpu->do_unassigned_access,
which (for MIPS CPU) raise an data bus exception.
This fixes a MIPS Jazz regression introduced in c658b94f6e8c206c59d02aa6fbac285b86b53d2c.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
After commit b1bbfe7 (aio / timers: On timer modification, qemu_notify
or aio_notify, 2013-08-21) FreeBSD guests report a huge slowdown.
The problem shows up as soon as FreeBSD turns out its periodic (~1 ms)
tick, but the timers are only the trigger for a pre-existing problem.
Before the offending patch, setting a timer did a timer_settime system call.
After, setting the timer exits the event loop (which uses poll) and
reenters it with a new deadline. This does not cause any slowdown; the
difference is between one system call (timer_settime and a signal
delivery (SIGALRM) before the patch, and two system calls afterwards
(write to a pipe or eventfd + calling poll again when re-entering the
event loop).
Unfortunately, the exit/enter causes the main loop to grab the iothread
lock, which in turns kicks the VCPU thread out of execution. This
causes TCG to execute the next VCPU in its round-robin scheduling of
VCPUS. When the second VCPU is mostly unused, FreeBSD runs a "pause"
instruction in its idle loop which only burns cycles without any
progress. As soon as the timer tick expires, the first VCPU runs
the interrupt handler but very soon it sets it again---and QEMU
then goes back doing nothing in the second VCPU.
The fix is to make the pause instruction do "cpu_loop_exit".
Reported-by: Luigi Rizzo <rizzo@iet.unipi.it>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The buffer content might be read out more than once, currently
we just repeatedly read the first data block, buffer offset is
missing.
Cc: qemu-stable@nongnu.org
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
We didn't set default chr_name, the free is redundant.
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Fix build failures with clang when KVM is not enabled by
providing a stub version of kvm_arch_get_supported_cpuid().
We retain the compile time check that this function isn't
called when CONFIG_KVM is not set by guarding the stub with
ifndef __OPTIMIZE__ (we assume that an optimizing build will
do sufficient constant folding and dead code elimination to
remove the calls before linking).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
When an assigned device is initialized it copies the device config
space into the emulated config space. Unfortunately multifunction is
setup prior to the device initfn and gets clobbered. We need to
restore it just like pci-assign does.
Cc: qemu-stable@nongnu.org
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
clang defines __ATOMIC_SEQ_CST but its implementation of the
__atomic_exchange() builtin differs from that of gcc. Move the
__clang__ branch of the ifdef ladder to the top and fix its
implementation (there is no such builtin as __sync_exchange),
so we can compile with clang again.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
This causes two slight backwards-incompatibilities between "-M pc-1.5"
and 1.5's "-M pc":
(1) a fw_cfg file is removed with this patch. This is only a problem
if migration stops the virtual machine exactly during fw_cfg enumeration.
(2) after migration, a VM created without an explicit "-device pvpanic"
will stop reporting panics to management.
The first problem only occurs if migration is done at a very, very
early point (and I'm not sure it can happen in practice for reasonable-size
VMs, since it will likely take more time to send the RAM to destination,
than it will take for BIOS to scan fw_cfg).
The second problem only occurs if the guest panics _and_ has a guest
driver _and_ management knows to look at the crash event, so it is
mostly theoretical at this point in time.
Thus keep the code simple, and pretend it was never broken.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Our rules.mak adds '-rR' to MAKEFLAGS to indicate that we will be
explicitly specifying everything and not relying on any default
variables or rules. However we were accidentally relying on the
default ARFLAGS ("rv"). This went unnoticed because of a bug in
GNU Make 3.82 and earlier which meant that adding -rR to MAKEFLAGS
only affected submakes, not the currently running instance.
Explicitly set ARFLAGS in config-host.mak, in the same way we
handle CFLAGS and LDFLAGS; this will allow us to work with
Make 4.0.
Thanks to Paul Smith for analyzing this bug for us.
Cc: qemu-stable@nongnu.org
Reported-by: Ken Moffat <zarniwhoop@ntlworld.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Upstream OpenBIOS now implements SBus probing in order to determine the
contents of a physical bus slot, which is required to allow OpenBIOS to
identify the framebuffer without help from the fw_cfg interface.
SBus probing works by detecting the presence of an FCode program
(effectively tokenised Forth) at the base address of each slot, and if
present executes it so that it creates its own device node in the
OpenBIOS device tree.
The FCode ROM is generated as part of the OpenBIOS build and should
generally be updated at the same time.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
CC: Blue Swirl <blauwirbel@gmail.com>
CC: Bob Breuer <breuerr@mc.net>
CC: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
|
|
When an assigned device is initialized it copies the device config
space into the emulated config space. Unfortunately multifunction is
setup prior to the device initfn and gets clobbered. We need to
restore it just like pci-assign does.
Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
Reviewed-by: Bandan Das <bsd@redhat.com>
Message-id: 20131112185059.7262.33780.stgit@bling.home
Cc: qemu-stable@nongnu.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
|
|
Fix the following run-test-x86_64 testsuite failures:
-lea (%%eax) = 0000000000000001
-lea (%%ebx) = 0000000000000002
-lea (%%ecx) = 0000000000000004
-lea (%%edx) = 0000000000000008
-lea (%%esi) = 0000000000000010
-lea (%%edi) = 0000000000000020
+lea (%%eax) = 0000abcc00000001
+lea (%%ebx) = 0000abcf00000002
+lea (%%ecx) = 0000abc900000004
+lea (%%edx) = 0000abc500000008
+lea (%%esi) = 0000abdd00000010
+lea (%%edi) = 0000abed00000020
In addition, reduce ifdeffery and minimize the number of TCG ops
produced during address computation.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Message-id: 1384219016-5170-1-git-send-email-rth@twiddle.net
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
|
|
clang defines __ATOMIC_SEQ_CST but its implementation of the
__atomic_exchange() builtin differs from that of gcc. Move the
__clang__ branch of the ifdef ladder to the top and fix its
implementation (there is no such builtin as __sync_exchange),
so we can compile with clang again.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1382435921-18438-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
|
|
Commit 787aaf5 (target-i386: forward CPUID cache leaves when -cpu host is
used, 2013-09-02) brings bits 31..26 of CPUID leaf 04h out of sync with
the APIC IDs that QEMU reserves for each package. This number must come
from "-smp" options rather than from the host CPUID.
It also turns out that this unsyncing makes Windows Server 2012R2 fail
to boot.
Tested-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Message-id: 1384879786-6721-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
|
|
MIPS Jazz chipset doesn't seem to raise data bus exceptions on invalid accesses.
However, there is no easy way to prevent them. Creating a big memory region
for the whole address space doesn't prevent memory core to directly call
unassigned_mem_read/write which in turn call cpu->do_unassigned_access,
which (for MIPS CPU) raise an data bus exception.
This fixes a MIPS Jazz regression introduced in c658b94f6e8c206c59d02aa6fbac285b86b53d2c.
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Hervé Poussineau <hpoussin@reactos.org>
Message-id: 1383603977-7003-1-git-send-email-hpoussin@reactos.org
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
|
|
After commit b1bbfe7 (aio / timers: On timer modification, qemu_notify
or aio_notify, 2013-08-21) FreeBSD guests report a huge slowdown.
The problem shows up as soon as FreeBSD turns out its periodic (~1 ms)
tick, but the timers are only the trigger for a pre-existing problem.
Before the offending patch, setting a timer did a timer_settime system call.
After, setting the timer exits the event loop (which uses poll) and
reenters it with a new deadline. This does not cause any slowdown; the
difference is between one system call (timer_settime and a signal
delivery (SIGALRM) before the patch, and two system calls afterwards
(write to a pipe or eventfd + calling poll again when re-entering the
event loop).
Unfortunately, the exit/enter causes the main loop to grab the iothread
lock, which in turns kicks the VCPU thread out of execution. This
causes TCG to execute the next VCPU in its round-robin scheduling of
VCPUS. When the second VCPU is mostly unused, FreeBSD runs a "pause"
instruction in its idle loop which only burns cycles without any
progress. As soon as the timer tick expires, the first VCPU runs
the interrupt handler but very soon it sets it again---and QEMU
then goes back doing nothing in the second VCPU.
The fix is to make the pause instruction do "cpu_loop_exit".
Cc: Richard Henderson <rth@twiddle.net>
Reported-by: Luigi Rizzo <rizzo@iet.unipi.it>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Message-id: 1384948442-24217-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
|
|
The buffer content might be read out more than once, currently
we just repeatedly read the first data block, buffer offset is
missing.
Cc: qemu-stable@nongnu.org
Signed-off-by: Amos Kong <akong@redhat.com>
Message-id: 1385023371-8198-3-git-send-email-akong@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
|
|
We didn't set default chr_name, the free is redundant.
Signed-off-by: Amos Kong <akong@redhat.com>
Message-id: 1385023371-8198-2-git-send-email-akong@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
|
|
If period is assigned to 0, limit timer will expire immediately.
It causes a qemu warning:
"main-loop: WARNING: I/O thread spun for 1000 iterations"
This limit is meaningless. This patch forbids to assign 0 to period.
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Message-id: 1385031203-23790-1-git-send-email-akong@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
|
|
pc-bios/s390-zipl.rom is a flat image so it's expected that
loading it as elf will fail.
It should fall back on loading a flat file, but doesn't
on 32 bit systems, instead it fails printing:
qemu: hardware error: could not load bootloader 's390-zipl.rom'
The result is boot failure.
The reason is that a 64 bit unsigned interger which is set
to -1 on error is compared to -1UL which on a 32 bit system
with gcc is a 32 bit unsigned interger.
Since both are unsigned, no sign extension takes place and
comparison evaluates to non-equal.
There's no reason to do clever tricks: all functions
we call actually return int so just use int.
And then we can use == -1 everywhere, consistently.
Reviewed-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 20131121133426.GA30827@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
|
|
g_array_get_element_size was only added in glib 2.14.
Fortunately we don't use it for any arrays where
element size is > 1, so just add an assert.
Reported-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1385036128-8753-2-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
|
|
g_string_vprintf was only introduced in 2.24 so switch to vsnprintf
instead. A bit uglier but name size is fixed at 4 bytes here so it's
easy.
Reported-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1385036128-8753-1-git-send-email-mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
|
|
# By Jan Kiszka (1) and others
# Via Gleb Natapov
* qemu-kvm/uq/master:
kvm: Fix uninitialized cpuid_data
pci-assign: Remove dead code for direct I/O region access from userspace
KVM: x86: fix typo in KVM_GET_XCRS
Message-id: cover.1385040432.git.gleb@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
|
|
# By Sebastian Macke
# Via Jia Liu
* jliu/or32:
target-openrisc: Correct carry flag check of l.addc and l.addic test cases
target-openrisc: Correct memory bounds checking for the tlb buffers
openrisc-timer: Reduce overhead, Separate clock update functions
target-openrisc: Correct wrong epcr register in interrupt handler
target-openrisc: Remove executable flag for every page
target-openrisc: Remove unnecessary code generated by jump instructions
target-openrisc: Speed up move instruction
Message-id: 1384958318-9145-1-git-send-email-proljc@gmail.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
|
|
# By Wangting (Kathy)
# Via Juan Quintela
* quintela/migration.next:
The calculation of bytes_xfer in qemu_put_buffer() is wrong
Message-id: 1384946787-8190-1-git-send-email-quintela@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
|
|
This reverts commit cd5be5829c1ce87aa6b3a7806524fac07ac9a757.
Digging into hardware specs shows this does not
actually make QEMU behave more like hardware:
There are valid arguments backed by the spec to indicate why the version
of e1000 prior to cd5be582 was more correct: the high byte actually
includes a valid bit, this is why all guests write it last.
For rtl8139 there's actually a separate undocumented valid bit, but we
don't implement it yet.
To summarize all the drivers we know about behave in one way
that allows us to make an assumption about write order and avoid
spurious, incorrect mac address updates to the monitor.
Let's stick to the tried heuristic for 1.7 and
possibly revisit for 1.8.
Reported-by: Vlad Yasevich <vyasevic@redhat.com>
Reviewed-by: Vlad Yasevich <vyasevic@redhat.com>
Cc: Amos Kong <akong@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
g_array_get_element_size was only added in glib 2.14,
there's no way to find element size in with an older glib.
Fortunately we only use a single table (linker) where element size > 1.
Switch element size to 1 everywhere, then we can just look at len field
to get table size in bytes.
Add an assert to make sure we catch any violations of this rule.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
|
g_string_vprintf was only introduced in 2.24 so switch to vsnprintf
instead. A bit uglier but name size is fixed at 4 bytes here so it's
easy.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reported-by: Richard Henderson <rth@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
|
