aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-01-26acpi: factor out common cpu hotplug code for PIIX4/Q35Igor Mammedov
.. so it could be used for adding CPU hotplug to Q35 machine Add an additional header with that will be shared between C and ASL code: include/hw/acpi/cpu_hotplug_defs.h Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26acpi-build: enable hotplug for PCI bridgesMichael S. Tsirkin
This enables support for device hotplug behind pci bridges. Bridge devices themselves need to be pre-configured on qemu command line. Design: - at machine init time, assign "bsel" property to bridges with hotplug support - dynamically (At ACPI table read) generate ACPI code to handle hotplug events for each bridge with "bsel" property Note: ACPI doesn't support adding or removing bridges by hotplug. We detect and prevent removal of bridges by hotplug, unless they were added by hotplug previously (and so, are not described by ACPI). Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26piix4: add acpi pci hotplug supportMichael S. Tsirkin
Add support for acpi pci hotplug using the new infrastructure. PIIX4 legacy interface is maintained as is for machine types 1.7 and older. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26pcihp: generalization of piix4 acpiMichael S. Tsirkin
Add ACPI based PCI hotplug library with bridge hotplug support. Design - each bus gets assigned "bsel" property. - ACPI code writes this number to a new BNUM register, then uses existing UP/DOWN registers to probe slot status; to eject, write number to BNUM register, then slot into existing EJ. The interface is actually backwards-compatible with existing PIIX4 ACPI (though not migration compatible). This is split out from PIIX4 codebase so we can reuse it for Q35 as well. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26pci: add pci_for_each_bus_depth_firstMichael S. Tsirkin
Useful for ACPI hotplug. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26pc: make: fix dependencies: rebuild when included file is changedIgor Mammedov
some *.dsl files include another *.dsl files but there weren't any dependicies and when included file changed target table wasn't rebuild. Fix this by using the same auto dependency generation as for C files. Signed-off-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26acpi unit-test: do not fail on asl mismatchMarcel Apfelbaum
The asl comparison will break every time the ACPI tables are updated. This may break the git bisect. Instead of failing print a warning on stderr including the retained asl files, so they can be compared offline. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26acpi unit-test: resolved iasl crashMarcel Apfelbaum
It seems that iasl has an issue when disassembles some ACPI tables using the command line: iasl -e DSDT -e SSDT -d HPET Modified the iasl command line to "iasl -d HPET" until the problem is solved. The command line remained the same for DSDT and SSDT tables. Reported-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26acpi unit-test: renamed ssdt_tables to tablesMarcel Apfelbaum
Just a refactoring, ssdt_tables name was confusing as it included other tables as well. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26tests: fix acpi to work on bigendian hostAlexey Kardashevskiy
Double endianness convertion make this test failing on POWERPC machine running in big-endian. This fixes the test to success on big-endian host. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26acpi unit-test: hook to rebuild expected aml filesMarcel Apfelbaum
When running the test with TEST_ACPI_REBUILD_AML=y environment variable, the test will rebuild and validate the expected aml files. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26acpi unit-test: added script to rebuild the expected aml filesMarcel Apfelbaum
Acpi unit-test will fail every time the acpi tables change. This script rebuild the expected aml files, so the test will pass. It also validates the modifications. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26acpi unit-test: extract iasl executable from configurationMarcel Apfelbaum
The test checked if iasl is installed by running "iasl" and checking the error output. It is better to use the iasl executable as appears in configuration. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26configure: add CONFIG_IASL to config-host.hMarcel Apfelbaum
Acpi unit-tests will extract iasl executable from CONFIG_IASL define. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26acpi unit-test: compare DSDT and SSDT tables against expected valuesMarcel Apfelbaum
This test will run only if iasl is installed on the host machine. The test plan: 1. Dumps the ACPI tables as AML on the disk. 2. Runs iasl to disassembly the tables into ASL files. 3. Runs iasl to disassembly the offline AML files into ASL files. 4. Compares the ASL files. The test runs for both default machine and q35. In case the test fails, it can be easily tweaked to show the differences between the ASL files and understand the issue. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26configure: added acpi unit-test filesMarcel Apfelbaum
Ensure configure will set-up links for the files if the build is created in other directory. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26acpi unit-test: add test filesMarcel Apfelbaum
Added unit-test's expected aml files to be compared with the actual ACPI tables. Signed-off-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26virtio: Fix return value for dummy function vhost_net_virtqueue_pendingStefan Weil
cgcc complains that -ENOSYS is not a good value for 'bool'. A dummy virtio will never have pending queue entries, so let us return false. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26ACPI: Fix AppleSMC _STA sizeGabriel L. Somlo
Minimize the storage used for AppleSMC's _STA (8bit), relying on ASL to implicitly convert it to the officially specified 32bit value. Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26Add DSDT node for AppleSMCGabriel L. Somlo
AppleSMC (-device isa-applesmc) is required to boot OS X guests. OS X expects a SMC node to be present in the ACPI DSDT. This patch adds a SMC node to the DSDT, and dynamically patches the return value of SMC._STA to either 0x0B if the chip is present, or otherwise to 0x00, before booting the guest. Signed-off-by: Gabriel Somlo <somlo@cmu.edu> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-26Python-lang gdb script to extract x86_64 guest vmcore from qemu coredumpLaszlo Ersek
When qemu dies unexpectedly, for example in response to an explicit abort() call, or (more importantly) when an external signal is delivered to it that results in a coredump, sometimes it is useful to extract the guest vmcore from the qemu process' memory image. The guest vmcore might help understand an emulation problem in qemu, or help debug the guest. This script reimplements (and cuts many features of) the qmp_dump_guest_memory() command in gdb/Python, https://sourceware.org/gdb/current/onlinedocs/gdb/Python-API.html working off the saved memory image of the qemu process. The docstring in the patch (serving as gdb help text) describes the limitations relative to the QMP command. Dependencies of qmp_dump_guest_memory() have been reimplemented as needed. I sought to follow the general structure, sticking to original function names where possible. However, keeping it simple prevailed in some places. The patch has been tested with a 4 VCPU, 768 MB, RHEL-6.4 (2.6.32-358.el6.x86_64) guest: - The script printed > guest RAM blocks: > target_start target_end host_addr message count > ---------------- ---------------- ---------------- ------- ----- > 0000000000000000 00000000000a0000 00007f95d0000000 added 1 > 00000000000a0000 00000000000b0000 00007f960ac00000 added 2 > 00000000000c0000 00000000000ca000 00007f95d00c0000 added 3 > 00000000000ca000 00000000000cd000 00007f95d00ca000 joined 3 > 00000000000cd000 00000000000d0000 00007f95d00cd000 joined 3 > 00000000000d0000 00000000000f0000 00007f95d00d0000 joined 3 > 00000000000f0000 0000000000100000 00007f95d00f0000 joined 3 > 0000000000100000 0000000030000000 00007f95d0100000 joined 3 > 00000000fc000000 00000000fc800000 00007f960ac00000 added 4 > 00000000fffe0000 0000000100000000 00007f9618800000 added 5 > dumping range at 00007f95d0000000 for length 00000000000a0000 > dumping range at 00007f960ac00000 for length 0000000000010000 > dumping range at 00007f95d00c0000 for length 000000002ff40000 > dumping range at 00007f960ac00000 for length 0000000000800000 > dumping range at 00007f9618800000 for length 0000000000020000 - The vmcore was checked with "readelf", comparing the results against a vmcore written by qmp_dump_guest_memory(): > --- theirs 2013-09-12 17:38:59.797289404 +0200 > +++ mine 2013-09-12 17:39:03.820289404 +0200 > @@ -27,16 +27,16 @@ > Type Offset VirtAddr PhysAddr > FileSiz MemSiz Flags Align > NOTE 0x0000000000000190 0x0000000000000000 0x0000000000000000 > - 0x0000000000000ca0 0x0000000000000ca0 0 > - LOAD 0x0000000000000e30 0x0000000000000000 0x0000000000000000 > + 0x000000000000001c 0x000000000000001c 0 > + LOAD 0x00000000000001ac 0x0000000000000000 0x0000000000000000 > 0x00000000000a0000 0x00000000000a0000 0 > - LOAD 0x00000000000a0e30 0x0000000000000000 0x00000000000a0000 > + LOAD 0x00000000000a01ac 0x0000000000000000 0x00000000000a0000 > 0x0000000000010000 0x0000000000010000 0 > - LOAD 0x00000000000b0e30 0x0000000000000000 0x00000000000c0000 > + LOAD 0x00000000000b01ac 0x0000000000000000 0x00000000000c0000 > 0x000000002ff40000 0x000000002ff40000 0 > - LOAD 0x000000002fff0e30 0x0000000000000000 0x00000000fc000000 > + LOAD 0x000000002fff01ac 0x0000000000000000 0x00000000fc000000 > 0x0000000000800000 0x0000000000800000 0 > - LOAD 0x00000000307f0e30 0x0000000000000000 0x00000000fffe0000 > + LOAD 0x00000000307f01ac 0x0000000000000000 0x00000000fffe0000 > 0x0000000000020000 0x0000000000020000 0 > > There is no dynamic section in this file. > @@ -47,13 +47,6 @@ > > No version information found in this file. > > -Notes at offset 0x00000190 with length 0x00000ca0: > +Notes at offset 0x00000190 with length 0x0000001c: > Owner Data size Description > - CORE 0x00000150 NT_PRSTATUS (prstatus structure) > - CORE 0x00000150 NT_PRSTATUS (prstatus structure) > - CORE 0x00000150 NT_PRSTATUS (prstatus structure) > - CORE 0x00000150 NT_PRSTATUS (prstatus structure) > - QEMU 0x000001b0 Unknown note type: (0x00000000) > - QEMU 0x000001b0 Unknown note type: (0x00000000) > - QEMU 0x000001b0 Unknown note type: (0x00000000) > - QEMU 0x000001b0 Unknown note type: (0x00000000) > + NONE 0x00000005 Unknown note type: (0x00000000) - The vmcore was checked with "crash" too, again comparing the results against a vmcore written by qmp_dump_guest_memory(): > --- guest.vmcore.log2 2013-09-12 17:52:27.074289201 +0200 > +++ example.dump.log2 2013-09-12 17:52:15.904289203 +0200 > @@ -22,11 +22,11 @@ > This GDB was configured as "x86_64-unknown-linux-gnu"... > > KERNEL: /usr/lib/debug/lib/modules/2.6.32-358.el6.x86_64/vmlinux > - DUMPFILE: /home/lacos/tmp/guest.vmcore > + DUMPFILE: /home/lacos/tmp/example.dump > CPUS: 4 > - DATE: Thu Sep 12 17:16:11 2013 > - UPTIME: 00:01:09 > -LOAD AVERAGE: 0.07, 0.03, 0.00 > + DATE: Thu Sep 12 17:17:41 2013 > + UPTIME: 00:00:38 > +LOAD AVERAGE: 0.18, 0.05, 0.01 > TASKS: 130 > NODENAME: localhost.localdomain > RELEASE: 2.6.32-358.el6.x86_64 > @@ -38,12 +38,12 @@ > COMMAND: "swapper" > TASK: ffffffff81a8d020 (1 of 4) [THREAD_INFO: ffffffff81a00000] > CPU: 0 > - STATE: TASK_RUNNING (PANIC) > + STATE: TASK_RUNNING (ACTIVE) > + WARNING: panic task not found > > crash> bt > PID: 0 TASK: ffffffff81a8d020 CPU: 0 COMMAND: "swapper" > - #0 [ffffffff81a01ed0] default_idle at ffffffff8101495d > - #1 [ffffffff81a01ef0] cpu_idle at ffffffff81009fc6 > + #0 [ffffffff81a01ef0] cpu_idle at ffffffff81009fc6 > crash> task ffffffff81a8d020 > PID: 0 TASK: ffffffff81a8d020 CPU: 0 COMMAND: "swapper" > struct task_struct { > @@ -75,7 +75,7 @@ > prev = 0xffffffff81a8d080 > }, > on_rq = 0, > - exec_start = 8618466836, > + exec_start = 7469214014, > sum_exec_runtime = 0, > vruntime = 0, > prev_sum_exec_runtime = 0, > @@ -149,7 +149,7 @@ > }, > tasks = { > next = 0xffff88002d621948, > - prev = 0xffff880029618f28 > + prev = 0xffff880023b74488 > }, > pushable_tasks = { > prio = 140, > @@ -165,7 +165,7 @@ > } > }, > mm = 0x0, > - active_mm = 0xffff88002929b780, > + active_mm = 0xffff8800297eb980, > exit_state = 0, > exit_code = 0, > exit_signal = 0, > @@ -177,7 +177,7 @@ > sched_reset_on_fork = 0, > pid = 0, > tgid = 0, > - stack_canary = 2483693585637059287, > + stack_canary = 7266362296181431986, > real_parent = 0xffffffff81a8d020, > parent = 0xffffffff81a8d020, > children = { > @@ -224,14 +224,14 @@ > set_child_tid = 0x0, > clear_child_tid = 0x0, > utime = 0, > - stime = 3, > + stime = 2, > utimescaled = 0, > - stimescaled = 3, > + stimescaled = 2, > gtime = 0, > prev_utime = 0, > prev_stime = 0, > nvcsw = 0, > - nivcsw = 1000, > + nivcsw = 1764, > start_time = { > tv_sec = 0, > tv_nsec = 0 - <name_dropping>I asked for Dave Anderson's help with verifying the extracted vmcore, and his comments make me think I should post this.</name_dropping> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2014-01-24Merge remote-tracking branch 'qemu-kvm/uq/master' into stagingAnthony Liguori
* qemu-kvm/uq/master: kvm: always update the MPX model specific register KVM: fix addr type for KVM_IOEVENTFD KVM: Retry KVM_CREATE_VM on EINTR mempath prefault: fix off-by-one error kvm: x86: Separately write feature control MSR on reset roms: Flush icache when writing roms to guest memory target-i386: clear guest TSC on reset target-i386: do not special case TSC writeback target-i386: Intel MPX Conflicts: exec.c aliguori: fix trivial merge conflict in exec.c Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2014-01-24Merge remote-tracking branch 'otubo/seccomp' into stagingAnthony Liguori
* otubo/seccomp: seccomp: add some basic shared memory syscalls to the whitelist seccomp: add mkdir() and fchmod() to the whitelist Message-id: 1390231004-18392-1-git-send-email-otubo@linux.vnet.ibm.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2014-01-24Merge remote-tracking branch 'sweil/tags/for_anthony' into stagingAnthony Liguori
Initial patch for QEMU GTK support on Windows # gpg: Signature made Mon 20 Jan 2014 11:37:58 AM PST using RSA key ID FAD62069 # gpg: Can't check signature: public key not found * sweil/tags/for_anthony: gtk: Support keyboard translation for hosts running Windows Message-id: 1390246909-18757-1-git-send-email-sw@weilnetz.de Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2014-01-24Merge remote-tracking branch 'kraxel/tags/pull-audio-2' into stagingAnthony Liguori
hda-codec: disable streams on reset # gpg: Signature made Tue 21 Jan 2014 02:17:12 AM PST using RSA key ID D3E87138 # gpg: Can't check signature: public key not found * kraxel/tags/pull-audio-2: hda-codec: disable streams on reset Message-id: 1390299589-5082-1-git-send-email-kraxel@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2014-01-24Merge remote-tracking branch 'kraxel/tags/pull-usb-2' into stagingAnthony Liguori
usb core+hid: add support for microsoft os descriptors # gpg: Signature made Tue 21 Jan 2014 02:21:29 AM PST using RSA key ID D3E87138 # gpg: Can't check signature: public key not found * kraxel/tags/pull-usb-2: usb-hid: add microsoft os descriptor support usb: add support for microsoft os descriptors Message-id: 1390299772-5368-1-git-send-email-kraxel@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2014-01-24Merge remote-tracking branch 'bonzini/scsi-next' into stagingAnthony Liguori
* bonzini/scsi-next: scsi: Support TEST UNIT READY in the dummy LUN0 block: add .bdrv_reopen_prepare() stub for iscsi virtio-scsi: Prevent assertion on missed events virtio-scsi: Cleanup of I/Os that never started scsi: Assign cancel_io vector for scsi_disk_emulate_ops Conflicts: block/iscsi.c aliguori: resolve trivial merge conflict in block/iscsi.c Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2014-01-24Merge remote-tracking branch 'kwolf/tags/for-anthony' into stagingAnthony Liguori
Block patches # gpg: Signature made Fri 24 Jan 2014 08:40:53 AM PST using RSA key ID C88F2FD6 # gpg: Can't check signature: public key not found * kwolf/tags/for-anthony: (93 commits) block: Switch bdrv_io_limits_intercept() to byte granularity qemu-iotests: Test pwritev RMW logic qemu-io: New command 'sleep' blkdebug: Make required alignment configurable iscsi: Set bs->request_alignment block: Make bdrv_pwrite() a bdrv_prwv_co() wrapper block: Make bdrv_pread() a bdrv_prwv_co() wrapper block: Change coroutine wrapper to byte granularity block: Assert serialisation assumptions in pwritev block: Align requests in bdrv_co_do_pwritev() block: Allow wait_serialising_requests() at any point block: Make overlap range for serialisation dynamic block: Generalise and optimise COR serialisation block: Make zero-after-EOF work with larger alignment block: Allow waiting for overlapping requests between begin/end block: Switch BdrvTrackedRequest to byte granularity block: Introduce bdrv_co_do_pwritev() block: write: Handle COR dependency after I/O throttling block: Introduce bdrv_aligned_pwritev() block: Introduce bdrv_co_do_preadv() ... Message-id: 1390584136-24703-1-git-send-email-kwolf@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2014-01-24block: Switch bdrv_io_limits_intercept() to byte granularityKevin Wolf
Request sizes used to be rounded down to the next sector boundary, allowing to bypass the I/O limit. Now all requests are accounted for with their exact byte size. Reported-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2014-01-24qemu-iotests: Test pwritev RMW logicKevin Wolf
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2014-01-24qemu-io: New command 'sleep'Kevin Wolf
There is no easy way to check that a request correctly waits for a different request. With a sleep command we can at least approximate it. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24blkdebug: Make required alignment configurableKevin Wolf
The new 'align' option of blkdebug can be used in order to emulate backends with a required 4k alignment on hosts which only really require 512 byte alignment. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2014-01-24iscsi: Set bs->request_alignmentPaolo Bonzini
The iSCSI backend already gets the block size from the READ CAPACITY command it sends. Save it so that the generic block layer gets it too. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2014-01-24block: Make bdrv_pwrite() a bdrv_prwv_co() wrapperKevin Wolf
Instead of implementing the alignment adjustment here, use the now existing functionality of bdrv_co_do_pwritev(). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2014-01-24block: Make bdrv_pread() a bdrv_prwv_co() wrapperKevin Wolf
Instead of implementing the alignment adjustment here, use the now existing functionality of bdrv_co_do_preadv(). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2014-01-24block: Change coroutine wrapper to byte granularityKevin Wolf
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2014-01-24block: Assert serialisation assumptions in pwritevKevin Wolf
If a request calls wait_serialising_requests() and actually has to wait in this function (i.e. a coroutine yield), other requests can run and previously read data (like the head or tail buffer) could become outdated. In this case, we would have to restart from the beginning to read in the updated data. However, we're lucky and don't actually need to do that: A request can only wait in the first call of wait_serialising_requests() because we mark it as serialising before that call, so any later requests would wait. So as we don't wait in practice, we don't have to reload the data. This is an important assumption that may not be broken or data corruption will happen. Document it with some assertions. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2014-01-24block: Align requests in bdrv_co_do_pwritev()Kevin Wolf
This patch changes bdrv_co_do_pwritev() to actually be what its name promises. If requests aren't properly aligned, it performs a RMW. Requests touching the same block are serialised against the RMW request. Further optimisation of this is possible by differentiating types of requests (concurrent reads should actually be okay here). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net>
2014-01-24block: Allow wait_serialising_requests() at any pointKevin Wolf
We can only have a single wait_serialising_requests() call per request because otherwise we can run into deadlocks where requests are waiting for each other. The same is true when wait_serialising_requests() is not at the very beginning of a request, so that other requests can be issued between the start of the tracking and wait_serialising_requests(). Fix this by changing wait_serialising_requests() to ignore requests that are already (directly or indirectly) waiting for the calling request. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net>
2014-01-24block: Make overlap range for serialisation dynamicKevin Wolf
Copy on Read wants to serialise with all requests touching the same cluster, so wait_serialising_requests() rounded to cluster boundaries. Other users like alignment RMW will have different requirements, though (requests touching the same sector), so make it dynamic. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net>
2014-01-24block: Generalise and optimise COR serialisationKevin Wolf
Change the API so that specific requests can be marked serialising. Only these requests are checked for overlaps then. This means that during a Copy on Read operation, not all requests overlapping other requests are serialised any more, but only those that actually overlap with the specific COR request. Also remove COR from function and variable names because this functionality can be useful in other contexts. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net>
2014-01-24block: Make zero-after-EOF work with larger alignmentKevin Wolf
Odd file sizes could make bdrv_aligned_preadv() shorten the request in non-aligned ways. Fix it by rounding to the required alignment instead of 512 bytes. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net>
2014-01-24block: Allow waiting for overlapping requests between begin/endKevin Wolf
Previously, it was not possible to use wait_for_overlapping_requests() between tracked_request_begin()/end() because it would wait for itself. Ignore the current request in the overlap check and run more of the bdrv_co_do_preadv/pwritev code with a BdrvTrackedRequest present. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net>
2014-01-24block: Switch BdrvTrackedRequest to byte granularityKevin Wolf
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net>
2014-01-24block: Introduce bdrv_co_do_pwritev()Kevin Wolf
This is going to become the bdrv_co_do_preadv() equivalent for writes. In this patch, however, just a function taking byte offsets is created, it doesn't align anything yet. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net>
2014-01-24block: write: Handle COR dependency after I/O throttlingKevin Wolf
First waiting for all COR requests to complete and calling the throttling function afterwards means that the request could be delayed and we still need to wait for the COR request even if it was issued only after the throttled write request. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net>
2014-01-24block: Introduce bdrv_aligned_pwritev()Kevin Wolf
This separates the part of bdrv_co_do_writev() that needs to happen before the request is modified to match the backend alignment, and a part that needs to be executed afterwards and passes the request to the BlockDriver. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net>
2014-01-24block: Introduce bdrv_co_do_preadv()Kevin Wolf
Similar to bdrv_pread(), which aligns byte-aligned request to 512 byte sectors, bdrv_co_do_preadv() takes a byte-aligned request and aligns it to the alignment specified in bs->request_alignment. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net>
2014-01-24block: Introduce bdrv_aligned_preadv()Kevin Wolf
This separates the part of bdrv_co_do_readv() that needs to happen before the request is modified to match the backend alignment, and a part that needs to be executed afterwards and passes the request to the BlockDriver. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2014-01-24raw: Probe required direct I/O alignmentPaolo Bonzini
Add a bs->request_alignment field that contains the required offset/length alignment for I/O requests and fill it in the raw block drivers. Use ioctls if possible, else see what alignment it takes for O_DIRECT to succeed. While at it, also expose the memory alignment requirements, which may be (and in practice are) different from the disk alignment requirements. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-04 02:11:23 +0000