| Age | Commit message (Collapse) | Author |
|---|
|
NVIDIA V100 GPUs have on-board RAM which is mapped into the host memory
space and accessible as normal RAM via an NVLink bus. The VFIO-PCI driver
implements special regions for such GPUs and emulates an NVLink bridge.
NVLink2-enabled POWER9 CPUs also provide address translation services
which includes an ATS shootdown (ATSD) register exported via the NVLink
bridge device.
This adds a quirk to VFIO to map the GPU memory and create an MR;
the new MR is stored in a PCI device as a QOM link. The sPAPR PCI uses
this to get the MR and map it to the system address space.
Another quirk does the same for ATSD.
This adds additional steps to sPAPR PHB setup:
1. Search for specific GPUs and NPUs, collect findings in
sPAPRPHBState::nvgpus, manage system address space mappings;
2. Add device-specific properties such as "ibm,npu", "ibm,gpu",
"memory-block", "link-speed" to advertise the NVLink2 function to
the guest;
3. Add "mmio-atsd" to vPHB to advertise the ATSD capability;
4. Add new memory blocks (with extra "linux,memory-usable" to prevent
the guest OS from accessing the new memory until it is onlined) and
npuphb# nodes representing an NPU unit for every vPHB as the GPU driver
uses it for link discovery.
This allocates space for GPU RAM and ATSD like we do for MMIOs by
adding 2 new parameters to the phb_placement() hook. Older machine types
set these to zero.
This puts new memory nodes in a separate NUMA node to as the GPU RAM
needs to be configured equally distant from any other node in the system.
Unlike the host setup which assigns numa ids from 255 downwards, this
adds new NUMA nodes after the user configures nodes or from 1 if none
were configured.
This adds requirement similar to EEH - one IOMMU group per vPHB.
The reason for this is that ATSD registers belong to a physical NPU
so they cannot invalidate translations on GPUs attached to another NPU.
It is guaranteed by the host platform as it does not mix NVLink bridges
or GPUs from different NPU in the same IOMMU group. If more than one
IOMMU group is detected on a vPHB, this disables ATSD support for that
vPHB and prints a warning.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
[aw: for vfio portions]
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Message-Id: <20190312082103.130561-1-aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
|
|
staging
Advance the roms/edk2 submodule to the "edk2-stable201903" release, and
build and capture platform firmware binaries from that release. The
binaries are meant to be used by both end-users and by the "BIOS tables"
unit tests in qtest ("make check").
# gpg: Signature made Mon 22 Apr 2019 19:20:08 BST
# gpg: using RSA key D39DA71E0D496CFA
# gpg: Good signature from "Laszlo Ersek <lersek@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: F5D9 660F 1BA5 F310 A95A C5E0 466A EAE0 6125 3988
# Subkey fingerprint: B3A5 5D3F 88A8 90ED 2E63 3E8D D39D A71E 0D49 6CFA
* remotes/lersek/tags/edk2-pull-2019-04-22:
MAINTAINERS: add the "EDK2 Firmware" subsystem
Makefile: install the edk2 firmware images and their descriptors
tests: add missing dependency to build QTEST_QEMU_BINARY, round 2
pc-bios: document the edk2 firmware images; add firmware descriptors
pc-bios: add edk2 firmware binaries and variable store templates
roms: build edk2 firmware binaries and variable store templates
roms/Makefile: replace the $(EDK2_EFIROM) target with "edk2-basetools"
roms/edk2-funcs.sh: add the qemu_edk2_get_thread_count() function
roms/edk2: advance to tag edk2-stable201903
tests/uefi-test-tools/build.sh: work around TianoCore#1607
roms/edk2-funcs.sh: require gcc-4.8+ for building i386 and x86_64
roms: lift "edk2-funcs.sh" from "tests/uefi-test-tools/build.sh"
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
'remotes/armbru/tags/pull-error-monitor-2019-04-18' into staging
Error reporting & monitor patches for 2019-04-18
# gpg: Signature made Thu 18 Apr 2019 21:40:41 BST
# gpg: using RSA key 3870B400EB918653
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [full]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [full]
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* remotes/armbru/tags/pull-error-monitor-2019-04-18: (36 commits)
include: Move fprintf_function to disas/
disas: Rename include/disas/bfd.h back to include/disas/dis-asm.h
monitor: Clean up how monitor_disas() funnels output to monitor
qom/cpu: Simplify how CPUClass:cpu_dump_state() prints
qemu-print: New qemu_fprintf(), qemu_vfprintf()
qom/cpu: Simplify how CPUClass::dump_statistics() prints
target/i386: Simplify how x86_cpu_dump_local_apic_state() prints
target: Clean up how the dump_mmu() print
target: Simplify how the TARGET_cpu_list() print
memory: Clean up how mtree_info() prints
block/qapi: Clean up how we print to monitor or stdout
qsp: Simplify how qsp_report() prints
tcg: Simplify how dump_drift_info() prints
tcg: Simplify how dump_exec_info() prints
tcg: Simplify how dump_opcount_info() prints
trace: Simplify how st_print_trace_file_status() prints
include: Include fprintf-fn.h only where needed
monitor: Simplify how -device/device_add print help
char-pty: Print "char device redirected" message to stdout
char: Make -chardev help print to stdout
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The previous commits have eliminated fprintf_function outside
disassemblers, simplifying code and cleaning up the ugly type-punning
fprintf_function seems to attract. Move fprintf_function to
include/disas/dis-asm.h to reduce the temptation to abuse it.
I considered renaming it to fprintf_ftype (reverting that part of
commit 6e2d864edf5, v0.14.0) to get us closer to binutils, but I
figure the fork is too distant to make this worthwhile.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-18-armbru@redhat.com>
|
|
Commit dc99065b5f9 (v0.1.0) added dis-asm.h from binutils.
Commit 43d4145a986 (v0.1.5) inlined bfd.h into dis-asm.h to remove the
dependency on binutils.
Commit 76cad71136b (v1.4.0) moved dis-asm.h to include/disas/bfd.h.
The new name is confusing when you try to match against (pre GPLv3+)
binutils. Rename it back. Keep it in the same directory, of course.
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190417191805.28198-17-armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
INIT_DISASSEMBLE_INFO() takes an fprintf()-like callback and a FILE *
to pass to it. monitor_disas() passes monitor_fprintf() and the
current monitor cast to FILE *. monitor_fprintf() casts it right
back, and is otherwise identical to monitor_printf(). The
type-punning is ugly.
Pass qemu_fprintf() and NULL instead.
monitor_fprintf() is now unused; delete it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-16-armbru@redhat.com>
[Commit message typo corrected]
|
|
CPUClass method dump_statistics() takes an fprintf()-like callback and
a FILE * to pass to it. Most callers pass fprintf() and stderr.
log_cpu_state() passes fprintf() and qemu_log_file.
hmp_info_registers() passes monitor_fprintf() and the current monitor
cast to FILE *. monitor_fprintf() casts it right back, and is
otherwise identical to monitor_printf().
The callback gets passed around a lot, which is tiresome. The
type-punning around monitor_fprintf() is ugly.
Drop the callback, and call qemu_fprintf() instead. Also gets rid of
the type-punning, since qemu_fprintf() takes NULL instead of the
current monitor cast to FILE *.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-15-armbru@redhat.com>
|
|
Code that doesn't want to know about current monitor vs. stdout
vs. stderr takes an fprintf_function callback and a FILE * argument to
pass to it. Actual arguments are either fprintf() and stdout or
stderr, or monitor_fprintf() and the current monitor cast to FILE *.
monitor_fprintf() casts it right back, and is otherwise identical to
monitor_printf(). The type-punning is ugly.
New qemu_fprintf() and qemu_vprintf() address this need without type
punning: they are like fprintf() and vfprintf(), except they print to
the current monitor when passed a null FILE *. The next commits will
put them to use.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-14-armbru@redhat.com>
|
|
CPUClass method dump_statistics() takes an fprintf()-like callback and
a FILE * to pass to it.
Its only caller hmp_info_cpustats() (via cpu_dump_statistics()) passes
monitor_fprintf() and the current monitor cast to FILE *.
monitor_fprintf() casts it right back, and is otherwise identical to
monitor_printf(). The type-punning is ugly.
Drop the callback, and call qemu_printf() instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-13-armbru@redhat.com>
|
|
x86_cpu_dump_local_apic_state() takes an fprintf()-like callback and a
FILE * to pass to it, and so do its helper functions.
Its only caller hmp_info_local_apic() passes monitor_fprintf() and the
current monitor cast to FILE *. monitor_fprintf() casts it right
back, and is otherwise identical to monitor_printf(). The
type-punning is ugly.
Drop the callback, and call qemu_printf() instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-12-armbru@redhat.com>
|
|
The various dump_mmu() take an fprintf()-like callback and a FILE * to
pass to it, and so do their helper functions. Passing around callback
and argument is rather tiresome.
Most dump_mmu() are called only by the target's hmp_info_tlb(). These
all pass monitor_printf() cast to fprintf_function and the current
monitor cast to FILE *.
SPARC's dump_mmu() gets also called from target/sparc/ldst_helper.c a
few times #ifdef DEBUG_MMU. These calls pass fprintf() and stdout.
The type-punning is technically undefined behaviour, but works in
practice. Clean up: drop the callback, and call qemu_printf()
instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-11-armbru@redhat.com>
|
|
The various TARGET_cpu_list() take an fprintf()-like callback and a
FILE * to pass to it. Their callers (vl.c's main() via list_cpus(),
bsd-user/main.c's main(), linux-user/main.c's main()) all pass
fprintf() and stdout. Thus, the flexibility provided by the (rather
tiresome) indirection isn't actually used.
Drop the callback, and call qemu_printf() instead.
Calling printf() would also work, but would make the code unsuitable
for monitor context without making it simpler.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190417191805.28198-10-armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
mtree_info() takes an fprintf()-like callback and a FILE * to pass to
it, and so do its helper functions. Passing around callback and
argument is rather tiresome.
Its only caller hmp_info_mtree() passes monitor_printf() cast to
fprintf_function and the current monitor cast to FILE *.
The type-punning is technically undefined behaviour, but works in
practice. Clean up: drop the callback, and call qemu_printf()
instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-9-armbru@redhat.com>
|
|
bdrv_snapshot_dump(), bdrv_image_info_specific_dump(),
bdrv_image_info_dump() and their helpers take an fprintf()-like
callback and a FILE * to pass to it.
hmp.c passes monitor_printf() cast to fprintf_function and the current
monitor cast to FILE *.
qemu-img.c and qemu-io-cmds.c pass fprintf and stdout.
The type-punning is technically undefined behaviour, but works in
practice. Clean up: drop the callback, and call qemu_printf()
instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-8-armbru@redhat.com>
|
|
qsp_report() takes an fprintf()-like callback and a FILE * to pass to
it.
Its only caller hmp_sync_profile() passes monitor_fprintf() and the
current monitor cast to FILE *. monitor_fprintf() casts it right
back, and is otherwise identical to monitor_printf(). The
type-punning is ugly.
Drop the callback, and call qemu_printf() instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-7-armbru@redhat.com>
|
|
dump_drift_info() takes an fprintf()-like callback and a FILE * to pass
to it.
Its only caller hmp_info_jit() passes monitor_fprintf() and a Monitor
* cast to FILE *. monitor_fprintf() casts it right back, and is
otherwise identical to monitor_printf(). The type-punning is ugly.
Drop the callback, and call qemu_printf() instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-6-armbru@redhat.com>
|
|
dump_exec_info() takes an fprintf()-like callback and a FILE * to pass
to it.
Its only caller hmp_info_jit() passes monitor_fprintf() and the
current monitor cast to FILE *. monitor_fprintf() casts it right
back, and is otherwise identical to monitor_printf(). The
type-punning is ugly.
Drop the callback, and call qemu_printf() instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-5-armbru@redhat.com>
|
|
dump_opcount_info() takes an fprintf()-like callback and a FILE * to
pass to it.
Its only caller hmp_info_opcount() passes monitor_fprintf() and the
current monitor cast to FILE *. monitor_fprintf() casts it right
back, and is otherwise identical to monitor_printf(). The
type-punning is ugly.
Drop the callback, and call qemu_printf() instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-4-armbru@redhat.com>
|
|
st_print_trace_file_status() takes an fprintf()-like callback and a
FILE * to pass to it.
Its only caller hmp_trace_file() passes monitor_fprintf() and the
current monitor cast to FILE *. monitor_fprintf() casts it right
back, and is otherwise identical to monitor_printf(). The
type-punning is ugly.
Drop the callback, and call qemu_printf() instead.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-3-armbru@redhat.com>
|
|
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417191805.28198-2-armbru@redhat.com>
|
|
Commit a95db58f210 added monitor_vfprintf() as an error_printf()
generalized from stderr to arbitrary streams, then used it wrapped in
helper out_printf() to print -device/device_add help to stdout. Use
qemu_printf() instead, and delete monitor_vfprintf() and out_printf().
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417190641.26814-16-armbru@redhat.com>
|
|
char_pty_open() prints a "char device redirected to PTY_NAME (label
LABEL)" message to the current monitor or else to stderr. This is not
an error, so it shouldn't go to stderr. Print it to stdout instead.
Why is it even printed? No other ChardevClass::open() prints anything
on success. It's because you need to know PTY_NAME to actually use
this char device, e.g. like e.g. "socat STDIO,cfmakeraw FILE:PTY_NAME"
to use the monitor's readline interface. You can get PTY_NAME with
"info chardev" (a.k.a. query-chardev for QMP), but only if you already
have a monitor.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190417190641.26814-15-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
|
|
Command line help explicitly requested by the user should be printed
to stdout, not stderr. We do elsewhere. Adjust -chardev to match:
use qemu_printf() instead of error_printf(). Plain printf() would be
wrong because we need to print to the current monitor for "chardev-add
help".
Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190417190641.26814-14-armbru@redhat.com>
|
|
Command line help explicitly requested by the user should be printed
to stdout, not stderr. We do elsewhere. Adjust -drive to match: use
qemu_printf() instead of error_printf(). Plain printf() would be
wrong because we need to print to the current monitor for "drive_add
... format=help".
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190417190641.26814-13-armbru@redhat.com>
|
|
We commonly want to print to the current monitor if we have one, else
to stdout/stderr. For stderr, have error_printf(). For stdout, all
we have is monitor_vfprintf(), which is rather unwieldy. We often
print to stderr just because error_printf() is easier.
New qemu_printf() and qemu_vprintf() do exactly what's needed. The
next commits will put them to use.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417190641.26814-12-armbru@redhat.com>
|
|
printf() & friends return the number of characters written on success,
negative value on error.
monitor_printf(), monitor_vfprintf(), monitor_vprintf(),
error_printf(), error_printf_unless_qmp(), error_vprintf(), and
error_vprintf_unless_qmp() return void. Some of them carry a TODO
comment asking for int instead.
Improve them to return int like printf() does.
This makes our use of monitor_printf() as fprintf_function slightly
less dirty: the function cast no longer adds a return value that isn't
there. It still changes a parameter's pointer type. That will be
addressed in a future commit.
monitor_vfprintf() always returns zero. Improve it to return the
proper value.
Cc: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20190417190641.26814-11-armbru@redhat.com>
|
|
Command line help help explicitly requested by the user should be
printed to stdout, not stderr. We do elsewhere. Adjust -machine
$TYPE,help and -accel help to match: use printf() instead of
error_printf().
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-Id: <20190417190641.26814-10-armbru@redhat.com>
|
|
kvm_s390_mem_op() can fail in two ways: when !cap_mem_op, it returns
-ENOSYS, and when kvm_vcpu_ioctl() fails, it returns -errno set by
ioctl(). Its caller s390_cpu_virt_mem_rw() recovers from both
failures.
kvm_s390_mem_op() prints "KVM_S390_MEM_OP failed" with error_printf()
in the latter failure mode. Since this is obviously a warning, use
warn_report().
Perhaps the reporting should be left to the caller. It could warn on
failure other than -ENOSYS.
Cc: Thomas Huth <thuth@redhat.com>
Cc: qemu-s390x@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Message-Id: <20190417190641.26814-9-armbru@redhat.com>
|
|
Cc: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190417190641.26814-8-armbru@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
|
|
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190417190641.26814-7-armbru@redhat.com>
|
|
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Message-Id: <20190417190641.26814-6-armbru@redhat.com>
|
|
Cc: Paul Burton <pburton@wavecomp.com>
Cc: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190417190641.26814-5-armbru@redhat.com>
|
|
load_fit() reports errors with error_printf() instead of
error_report(). Worse, it even reports errors it actually recovers
from, in fit_cfg_compatible() and fit_load_fdt(). Messed up in
initial commit 51b58561c1d.
Convert the helper functions for load_fit() to Error. Make sure each
failure path sets an error.
Fix fit_cfg_compatible() and fit_load_fdt() not to report errors they
actually recover from.
Convert load_fit() to error_report().
Cc: Paul Burton <pburton@wavecomp.com>
Cc: Aleksandar Rikalo <arikalo@wavecomp.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20190417190641.26814-4-armbru@redhat.com>
|
|
Callbacks ssh_co_readv(), ssh_co_writev(), ssh_co_flush() report
errors to the user with error_printf(). They shouldn't, it's their
caller's job. Replace by a suitable trace point. While there, drop
the unreachable !s->sftp case.
Perhaps we should convert this part of the block driver interface to
Error, so block drivers can pass more detail to their callers. Not
today.
Cc: "Richard W.M. Jones" <rjones@redhat.com>
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190417190641.26814-3-armbru@redhat.com>
|
|
error_exit() uses low-level error_printf() to report errors.
Modernize it to use error_vreport().
Cc: Kevin Wolf <kwolf@redhat.com>
Cc: Max Reitz <mreitz@redhat.com>
Cc: qemu-block@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-Id: <20190417190641.26814-2-armbru@redhat.com>
|
|
It would be nice to have Error object not freed away when debugging a
coredump.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20190415142519.73060-1-vsementsov@virtuozzo.com>
[error_printf_unless_qmp() replaced by error_printf()]
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
Before the from qerror_report() to error_setg(), hints looked like
this:
qerror_report(QERR_MACRO, ... arguments ...);
error_printf_unless_qmp(... hint ...);
error_printf_unless_qmp() made perfect sense: it printed exactly when
qerror_report() did.
After the conversion to error_setg():
error_setg(errp, QERR_MACRO, ... arguments ...);
error_printf_unless_qmp(... hint ...);
The "unless QMP part" still made some sense; in QMP context, the
caller generally uses the error as QMP response instead of printing
it.
However, everything else is wrong. If the caller handles the error,
the hint gets printed anyway (unless QMP). If the caller reports the
error, the hint gets printed *before* the report (unless QMP) or not
at all (if QMP).
Commit 50b7b000c91 fixed this by making hints a member of Error. It
kept printing hints with error_printf_unless_qmp():
void error_report_err(Error *err)
{
error_report("%s", error_get_pretty(err));
+ if (err->hint) {
+ error_printf_unless_qmp("%s\n", err->hint->str);
+ }
error_free(err);
}
This is wrong. We should (and now can) print the hint exactly when we
print the error.
The mistake has since been copied to warn_report_err() in commit
e43ead1d0b9.
Fix both to use error_printf().
Reported-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Cc: Eric Blake <eblake@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20190416153850.5186-1-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
[Commit message tweaked]
|
|
This commit adds a error_init() helper which calls
g_log_set_default_handler() so that glib logs (g_log, g_warning, ...)
are handled similarly to other QEMU logs. This means they will get a
timestamp if timestamps are enabled, and they will go through the
HMP monitor if one is configured.
This commit also adds a call to error_init() to the binaries
installed by QEMU. Since error_init() also calls error_set_progname(),
this means that *-linux-user, *-bsd-user and qemu-pr-helper messages
output with error_report, info_report, ... will slightly change: they
will be prefixed by the binary name.
glib debug messages are enabled through G_MESSAGES_DEBUG similarly to
the glib default log handler.
At the moment, this change will mostly impact SPICE logging if your
spice version is >= 0.14.1. With older spice versions, this is not going
to work as expected, but will not have any ill effect, so this call is
not conditional on the SPICE version.
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190131164614.19209-3-cfergeau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
qemu-io reimplements itself what
error_get_progname()/error_set_progname() already does.
This commit switches it to use this API from qemu-error.h
Signed-off-by: Christophe Fergeau <cfergeau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20190131164614.19209-2-cfergeau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
|
|
We now have the edk2 submodule, somewhat elaborate build helpers for it,
and even a UEFI application written against edk2 whose genuine home is the
QEMU repository. Add the "EDK2 Firmware" subsystem such that all relevant
pathnames be covered.
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Suggested-by: Michael S. Tsirkin <mst@redhat.com>
Suggested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
|
|
Decompress and install the edk2 firmware blobs as part of "make install",
unless blob installation was disabled with configure's "--disable-blobs"
option.
Additionally, decompress the blobs as a pre-requisite for building softmmu
binaries -- this is helpful for both "make check" and other ad-hoc tests
one might want to run in the build directory.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
|
|
In commit b94b330e2333 ("tests: add missing dependency to build
QTEST_QEMU_BINARY", 2017-07-31), Phil fixed the dependency list of make
target "check-qtest-%". Namely, the recipe would set QTEST_QEMU_BINARY to
the softmmu emulator for the emulation target, but the prerequisites
didn't include the emulator.
The same issue affects the "check-report-qtest-%.tap" make target, which
is the other make target whose recipe sets QTEST_QEMU_BINARY:
> $ make -j4 check-report-qtest-aarch64.tap
> TAP check-report-qtest-aarch64.tap
> sh: /.../aarch64-softmmu/qemu-system-aarch64: No such file or directory
Apply Phil's fix to this make target too.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
|
|
Update the README file with information on the images added previously,
and provide firmware descriptor documents that conform to
"docs/interop/firmware.json".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
|
|
Add the files built by the last patch: (compressed) binaries, and the
cumulative license text that covers them.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
|
|
Add the "efi" target to "Makefile".
Introduce "Makefile.edk2" for building and cleaning the firmware images
and varstore templates.
Collect the common bits from the recipes in the helper script
"edk2-build.sh".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
|
|
We don't (can't) have a recipe for building just $(EDK2_EFIROM);
therefore, while we call the target $(EDK2_EFIROM), we actually build all
of the edk2 BaseTools. Rename the target to edk2-basetools, and update the
iPXE prerequisite accordingly. This will let other targets depend on
"edk2-basetools", where an $(EDK2_EFIROM) pre-requisite would be
misleading.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
|
|
The edk2 "build" utility natively supports building modules (that is, INF
files) in parallel. The feature is not useful when building a single
module (with the "-m" option), but it is useful for platform firmware
builds (which include many modules). Add a function that determines the
"-n" option argument for "build", from the MAKEFLAGS variable (i.e. based
on the presence of a make job server).
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
|
|
Update the roms/edk2 submodule hash from edk2-stable201811 to
edk2-stable201903. The release notes are available at
<https://github.com/tianocore/edk2/releases/tag/edk2-stable201903>.
$ git shortlog edk2-stable201811..edk2-stable201903
Achin Gupta (9):
ArmPkg: Add PCDs needed for MM communication driver.
ArmPkg/Drivers: Add EFI_MM_COMMUNICATION_PROTOCOL DXE driver.
ArmPkg/Include: Add MM interface SVC return codes.
ArmPkg/ArmMmuLib: Add MMU Library suitable for use in S-EL0.
StandaloneMmPkg: Add missing dependency on PL011UartClockLib
StandaloneMmPkg: Enforce alignment check for AArch64
StandaloneMmPkg: Zero data structure explicitly
StandaloneMmPkg: Replace dependency on ArmMmuLib
StandaloneMmPkg: Update dependency on PeCoffExtraActionLib
Albecki, Mateusz (1):
MdeModulePkg/SdMmcPciHcDxe Fix eMMC HS400 switch sequence
Alex James (2):
StdLib/sys/termios: Define cc_t as unsigned
StdLib/Environs: Avoid infinite recursion in _Exit
Antoine Coeur (5):
ArmVirtPkg: Fix various typos
CryptoPkg: Fix various typos
CorebootPayloadPkg: Fix various typos
CorebootModulePkg: Fix various typos
BaseTools: Various typo
Ard Biesheuvel (116):
MdePkg/BaseIoLibIntrinsicArmVirt ARM: avoid double word loads and stores
ArmPkg/ArmGicDxe ARM: fix encoding for GICv3 interrupt acknowledge
ArmPlatformPkg: clear frame pointer in startup code
ArmVirtPkg/PrePi: clear frame pointer in startup code
ArmPkg/ArmSmcPsciResetSystemLib: add missing call to ExitBootServices()
ArmPkg: remove now unused BsdLib.h
ArmPlatformPkg/NorFlashDxe: prepare for devicepath format change
ArmPlatformPkg/NorFlashDxe: use one GUID plus index to identify flash banks
ArmVirtPkg/FdtClientDxe: take DT node 'status' properties into account
ArmVirtPkg/NorFlashQemuLib: discover NOR flash banks dynamically
ArmPlatformPkg/NorFlashPlatformLib: remove unused Guid member from struct
ArmPkg/ArmPkg.dsc: move ArmMmuStandaloneMmLib.inf to AARCH64 section
EmbeddedPkg/TemplateSec: remove unused module
EmbeddedPkg/PrePiHobLib: drop CreateHobList() from library
ArmVirtPkg/FdtPciHostBridgeLib: map ECAM and I/O spaces in GCD memory map
ArmVirtPkg/QemuVirtMemInfoLib: remove 1:1 mapping of top of PA range
MdePkg/ProcessorBind.h AARCH64: limit MAX_ADDRESS to 48 bits
ArmPkg/ArmLib: add support for reading the max physical address space size
ArmVirtPkg/XenVirtMemInfoLib: refactor reading of the PA space size
ArmPkg/ArmMmuLib: take the CPU supported maximum PA space into account
ArmPkg/CpuPei: base GCD memory space size on CPU's PA range
ArmPlatformPkg/PrePi: base GCD memory space size on CPU's PA range
ArmVirtPkg/PrePi: base GCD memory space size on CPU's PA range
BeagleBoardPkg/PrePi: base GCD memory space size on CPU's PA range
ArmPlatformPkg/PlatformPei: drop unused PCD references
EmbeddedPkg/PrePiLib: drop unused PCD reference
ArmVirtPkg: drop PcdPrePiCpuMemorySize assignments from all platforms
EmbeddedPkg/EmbeddedPkg.dec: drop PcdPrePiCpuMemorySize declarations
ArmPkg/ArmMmuLib ARM: handle unmapped section in GetMemoryRegion()
ArmPkg/ArmMmuLib ARM: handle unmapped sections when updating permissions
ArmVirtPkg/NorFlashQemuLib: disregard our primary FV
ArmVirtPkg/QemuVirtMemInfoLib: trim the MMIO region mapping
BaseTools/CommonLib: avoid using 'native' word size in IP address handling
BaseTools/CommonLib: use explicit 64-bit type in Strtoi()
BaseTools/DevicePath: use explicit 64-bit number parsing routines
BaseTools/CommonLib: add definition of MAX_UINT32
BaseTools/DevicePath: use MAX_UINT32 as default device path max size
BaseTools/CommonLib: get rid of 'native' type string parsing routines
BaseTools/CommonLib: drop definition of MAX_UINTN
BaseTools/CommonLib: drop the use of MAX_ADDRESS
Revert "MdePkg/ProcessorBind.h AARCH64: limit MAX_ADDRESS to 48 bits"
MdeModulePkg/FileExplorerLib: avoid packed struct for program data
BaseTools/tools_def AARCH64 RELEASE: move GCC49/GGC5 to 4 KB alignment
ArmVirtPkg/ArmVirtQemuKernel ARM: make some PCD settings apply to ARM
ArmVirtPkg/PrePiUniCoreRelocatable CLANG38: work around build issues
BaseTools/GenFw ARM: don't permit R_ARM_GOT_PREL relocations
MdePkg/BaseMemoryLibOptDxe ARM: add missing function annotations
BaseTools/tools_def ARM CLANG35: work around -mno-movt option name change
ArmVirtPkg/PrePi ARM CLANG35: drop incompatible command line option
ArmVirtPkg/ArmVirt.dsc.inc: define TcpIoLib resolution unconditionally
ArmPkg: remove redundant _ARM_PLATFORM_FLAGS overrides
EmbeddedPkg: remove GdbDebugAgent library
BaseTools/tools_def ARM: emit PIC veneers
ArmPkg/DefaultExceptionHandlerLib ARM: avoid endless loop in RELEASE builds
MdePkg/Base: introduce MAX_ALLOC_ADDRESS
MdeModulePkg/Dxe/Gcd: disregard memory above MAX_ALLOC_ADDRESS
MdeModulePkg/Dxe/Page: take MAX_ALLOC_ADDRESS into account
ArmPkg/ArmMmuLib: take MAX_ALLOC_ADDRESS into account
ArmPlatformPkg/MemoryInitPeim: take MAX_ALLOC_ADDRESS into account
ArmVirtPkg/MemoryInitPeiLib: split memory HOB based on MAX_ALLOC_ADDRESS
MdePkg/Arm/ProcessorBind.h: fix copy/paste error
ArmPlatformPkg/SP805WatchdogDxe: cosmetic cleanup
ArmPlatformPkg/SP805WatchdogDxe: switch to interrupt mode
ArmPkg/GenericWatchdogDxe: clean up the code
ArmPkg/GenericWatchdogDxe: implement RegisterHandler() method
ArmPlatformPkg/PL011SerialPortLib: use untyped PCD for register base
BaseTools/tools_def ARM: use softfloat target for CLANG3x
BaseTools/GenFds: permit stripped MM_CORE_STANDALONE binaries
BaseTools/Conf/tools_def.template: drop ARM/AARCH support from GCC46/GCC47
ArmPkg/ArmMmuLib ARM: add missing support for non-shareable cached mappings
ArmPkg/ArmMmuLib ARM: fix thinko in second level page table handling
MdePkg: implement MmServicesTableLib based on traditional SMM
BaseTools/tools_def GCC5: disable LTO for ASLC invocations
ArmPkg/ArmMmuLib ARM: disregard high memory when setting permissions
ArmPkg/ArmMmuLib AARCH64: fix out of bounds access
MdeModulePkg/MdeModulePkg.dsc: add MmServicesTableLib resolution
OvmfPkg: add MmServicesTableLib resolution
QuarkPlatformPkg: add MmServicesTableLib resolution
Vlv2TbltDevicePkg: add MmServicesTableLib resolution
MdeModulePkg/FaultTolerantWriteDxe: factor out boot service accesses
MdeModulePkg/FaultTolerantWriteDxe: implement standalone MM version
MdeModulePkg/VariableRuntimeDxe: factor out boot service accesses
MdeModulePkg/VariableRuntimeDxe: implement standalone MM version
MdePkg: introduce standalone MM entry point library class
MdePkg: introduce standalone MM entry point library implementation
MdePkg: add MM_STANDALONE implementation of MmServicesTableLib
MdeModulePkg: implement NULL instance of HobLib library class
MdeModulePkg: implement NULL instance of MemoryAllocationLib library class
MdeModulePkg/MdeModulePkg/dsc: move DxeDebugSupportDxe to x86 only section
MdeModulePkg/AuthVariableLibNull: add MM_STANDALONE support
MdeModulePkg/VarCheckLib: add MM_STANDALONE support
MdeModulePkg/MdeModulePkg.dsc: add MM_STANDALONE FTW and variable modules
ArmPkg/DebugAgentSymbolsBaseLib: remove exception handling
ArmPkg/DefaultExceptionHandlerLib: declare the permitted usage context
ArmVirtPkg: drop reference to ArmPkg/DefaultExceptionHandlerLibBase
ArmPkg/DefaultExceptionHandlerLib: drop BASE variant
ArmPkg/DefaultExceptionHandlerLib: use console if available
EmbeddedPkg/NorFlashInfoLib: convert to BASE library
ArmPkg/DefaultExceptionHandlerLib: add missing UefiLib include
CryptoPkg/SmmCryptLib: permit use by MM_STANDALONE modules
SecurityPkg/PlatformSecureLibNull: permit use by MM_STANDALONE modules
MdeModulePkg/VarCheckUefiLib: permit use by MM_STANDALONE modules
MdePkg/UefiDevicePathLib: permit use by MM_STANDALONE modules
StandaloneMmPkg: add HobLib implementation for MM_STANDALONE modules
StandaloneMmPkg: add MM_STANDALONE MemoryAllocationLib implementation
StandaloneMmPkg/StandaloneMmCoreHobLib: restrict to MM_CORE_STANDALONE
StandaloneMmPkg/StandaloneMmCpu: fix typo Standlone -> Standalone
StandaloneMmPkg/StandaloneMmCoreEntryPoint: use %a modifier for ASCII strings
StandaloneMmPkg/StandaloneMmCoreEntryPoint: remove bogus ASSERT_EFI_ERROR()s
StandaloneMmPkg/StandaloneMmPeCoffExtraActionLib: ignore runtime attribute
StandaloneMmPkg/Core/Dispatcher: don't copy dispatched image twice
StandaloneMmPkg/StandaloneMmCoreEntryPoint: permit the use of TE images
MdeModulePkg/MdeModulePkg.dsc: ignore standalone MM modules for EBC or XCODE5
ArmPkg/ArmMmuLib ARM: trim high memory regions instead of rejecting them
ArmPkg/ArmMmuLib AARCH64: get rid of needless TLB invalidation
MdePkg/BaseLib: implement SpeculationBarrier() for ARM and AArch64
Ashish Singhal (6):
MdeModulePkg/SdMmcPciHcDxe: Add SDMMC HC v4 and above Support.
MdePkg/UefiLib: Abstract driver model protocol uninstallation
NetworkPkg/IScsiDxe: Use UEFILib APIs to uninstall protocols.
NetworkPkg: Protocol Uninstallation Cleanup
DynamicTablesPkg/DynamicTableManagerDxe: Update DEPEX
DynamicTablesPkg/AcpiSpcrLibArm: Support 16550 UART.
Bret Barkelew (4):
MdePkg/IndustryStandard: Introduce a correctly spelled macro
SecurityPkg/Tcg: Fix typos in TcgDxe.c and Tcg2Dxe.c
MdePkg/IndustryStandard: Remove an incorrectly spelled macro
MdePkg/UefiLib: Add a new API GetVariable3
Chasel, Chiu (16):
IntelFsp2WrapperPkg: Support FSP Dispatch mode
IntelFsp2WrapperPkg: Revert 90c5bc08
IntelFsp2WrapperPkg: Support FSP Dispatch mode
IntelFsp2WrapperPkg: Fix line ending format issue
IntelFsp2WrapperPkg: Fix constant if statements issue
Maintainers.txt: Change package maintainer of IntelFsp*Pkg
BaseTools/GenFv: Support SecCore and PeiCore in different FV
IntelFsp2Pkg: Add FspmArchConfigPpi to support Dispatch mode
IntelFsp2Pkg: Remove unused keyword in new PPI header
IntelFsp2Pkg: Add function to get bootloader stack pointer
IntelFsp2Pkg: FSP can utilize bootloader stack
MdePkg: Support EFI_PEI_CORE_FV_LOCATION_PPI
MdeModulePkg/PeiMain: Support EFI_PEI_CORE_FV_LOCATION_PPI
UefiCpuPkg/SecCore: Support EFI_PEI_CORE_FV_LOCATION_PPI
UefiCpuPkg/SecCore: Support EFI_PEI_CORE_FV_LOCATION_PPI
UefiCpuPkg/SecCore: Wrong Debug Information for SecCore
Chen A Chen (18):
SecurityPkg: Remove dead code and inf redundant definitions.
SecurityPkg: Remove code under UserIdentification folder.
FatPkg: Break down Part.c file.
MdePkg/UefiGpt.h: Add new definition for enable GPT support
FatPkg: Add GPT check in FatPei to support Capsule-on-Disk feature.
MdePkg/UefiSpec.h: Add definition to support Capsule-on-Disk feature
MdeModulePkg/CapsuleApp: Add a function used to get next DevicePath
MdeModulePkg/CapsuleApp: Add functions to support Capsule-on-Disk
MdeModulePkg/CapsuleApp: Enhance CapsuleApp to support Capsule-on-Disk
FatPkg/FatPei/Gpt.c: Fix uninitialized variable issue
MdeModulePkg/CapsuleApp: Fix potential NULL pointer dereference issue
MdeModulePkg/CapsuleApp: Fix potential NULL pointer dereference issue
MdeModulePkg/CapsuleApp: Fix memory leak issue.
UefiCpuPkg/Microcode: Fix incorrect checksum issue for extended table
IntelSiliconPkg/MicrocodeUpdate: Fix incorrect checksum issue
MdeModulePkg: Rename confusion function name
UefiCpuPkg/Microcode: Fix InComplete CheckSum32 issue
UefiCpuPkg/Microcode.c: Add verification before calculate CheckSum32
Chu, Maggie (2):
SecurityPkg: Incorrect warning message for Opal admin revert action
SecurityPkg: Add a PCD to skip Opal password prompt
Dandan Bi (12):
MdeModulePkg/DisplayEngine: Remove useless NULL ptr check for NewPos
MdePkg: check Length para before use in DevPathToTextUsbWWID
MdePkg: Check input Ptrs in GetSectionFromAnyFvByFileType
BaseTools/VfrCompile: report error for Integer overflow
MdeModulePkg/NonDiscoverablePciDevice: Remove the redundant check
MdePkg/BasePeCoffLib: Add more check for relocation data
MdePkg/BasePeCoffLib: Correct the address of RelocBaseEnd
ShellPkg/UefiShellAcpiViewCommandLib: Fix VS tool chain build failure
MdeModulePkg: Fix coding style issues
MdePkg: Fix coding style issues
MdePkg/StatusCodeDataTypeId.h: Add new definition per PI1.7 Spec
MdeModulePkg/BmBoot: Report status when fail to load/start boot option
Derek Lin (1):
BaseTools: Fix GenFds error doesn't break build.
Edgar Handal (1):
MdeModulePkg/SdMmcPciHcDxe: Use 16/32-bit IO widths
Eric Dong (9):
UefiCpuPkg/Cpuid.h: Sync CPUID definition to latest SDM.
UefiCpuPkg/Cpuid: Add code to support new definition.
UefiCpuPkg/RegisterCpuFeaturesLib: Enhance debug message.
UefiCpuPkg/RegisterCpuFeaturesLib: Avoid AP calls PeiService.
UefiCpuPkg/S3Resume2Pei: check 64BIT_WAKE_F in FACS.OSPMFlags.
MdeModulePkg/BootScriptExecuteorDxe: check 64BIT_WAKE_F in FACS.OSPMFlags
UefiCpuPkg/RegisterCpuFeaturesLib: Replace AcquireSpinLock.
SecurityPkg/OpalPassword: Update strings on Opal Setup page
SecurityPkg/OpalPassword: Add NULL pointer check before using it
Felix Polyudov (1):
BaseTools: Fix incorrect formatting of GenFds command dictionary
Feng, Bob C (52):
BaseTools: Fix the problem using FILE_GUID override in .dsc
BaseTools: Enable Pcd Array support.
BaseTool: Filter out unused structure pcds
BaseTools: Replace the sqlite database with list
BaseTools: Optimize string concatenation
BaseTools: Customize deepcopy function.
BaseTools: Correct CCFLAG for PcdValueInit
BaseTools: Fix PcdNvStoreDefaultValueBuffer Value.
BaseTools: Fixed bugs in CopyDict function
BaseTools: Fixed the build fail issue for cases
BaseTools: Fix PcdArray issue
BaseTools: Fixed metafile parser issues
BaseTools: Reset FdsGlobalVariable
BaseTools: Fixed build report issue.
BaseTools: Correct PcdArray value assigment statement
BaseTools: Report Error if use SET in Dsc
BaseTools: Remove unused logic for EDKI
BaseTools: Remove unused logic for IPF
BaseTools: Remove unused logic from C tools
BaseTools: Enable component override functionality
BaseTools: Remove unused logic for EDKI
BaseTools: Remove EDK_SOURCE keyword from ECC Tool
BaseTools: Remove EDK_SOURCE keyword from GenFds tool.
BaseTools: Remove EDK_SOURCE keyword from Inf Parser.
BaseTools: Allow empty value for HiiPcd in Dsc
BaseTools: Fix build report issue.
BaseTools: use OrderedDict instead of sdict
BaseTools: Make sure AllPcdList valid.
BaseTools:File open failed for VPD MapFile
BaseTools:Fixed Rsa issue and a set define issue.
BaseTools:ord() don't match in py2 and py3
BaseTools: the list and iterator translation
BaseTools: Handle the bytes and str difference
BaseTools: ECC tool Python3 adaption
BaseTools: Eot tool Python3 adaption
BaseTools: Enable CODE format in DEC file
BaseTools: Fixed incorrect line number in PcdValueInit.c
BaseTools: Correct the error message for UPT
BaseTools: Fixed a build report issue.
BaseTools: Fix the build report issue about Structure PCD
BaseTools: Fixed an issue about StructurePcd
BaseTools: Add MaxSizeUserSet to Pcd deepcopy function
BaseTools: Fix a ParseDevPathValue function issue.
BaseTools: Fixed a bug in Vpd handling
BaseTools: Fixed a code bug for Pcd Array.
BaseTools: replace Sdict with OrderedDict in UPT
BaseTool: Fixed incremental rebuild issue.
BaseTools: Fix a bug about Structure PCD
BaseTools: Add parameter check for the AsciiStringToUint64
BaseTools: Eot failed when enable python3
BaseTools: Fix a Eot issue.
BaseTools: Add python3-distutils Ubuntu package checking
Gary Lin (2):
MdePkg ACPI: fix the typos in Acpi61.h and Acpi62.h
MdeModulePkg/UefiBootManagerLib: Match the nested partitions
Gonzalez Del Cueto, Rodrigo (1):
SecurityPkg/TcgConfigDxe: Allow enabling TPM 1.2 device from disabled state.
Hao Wu (25):
MdePkg/BaseLib: Introduce new SpeculationBarrier API
MdeModulePkg/FaultTolerantWrite: Update to consume SpeculationBarrier
MdeModulePkg/SmmLockBox: Update to consume SpeculationBarrier
MdeModulePkg/Variable: Update to consume SpeculationBarrier
UefiCpuPkg/PiSmmCpuDxeSmm: Update to consume SpeculationBarrier
UefiCpuPkg: Merge StuffRsb.inc files into one in UefiCpuPkg/Include
MdeModulePkg/SdMmcPciHcDxe: Fix VS2015 IA32 NOOPT build failure
MdeModulePkg/SdMmcPciHcDxe: Update comment for spec compliance status
MdeModulePkg: Add definitions for ATA AHCI host controller PPI
MdeModulePkg: Add definitions for EDKII PEI ATA PassThru PPI
MdeModulePkg: Add definitions for Storage Security Command PPI
MdeModulePkg: Add GUID for LockBox to save storage dev to init in S3
MdeModulePkg/NvmExpressPei: Avoid updating the module-level variable
MdeModulePkg/NvmExpressPei: Add logic to produce SSC PPI
MdeModulePkg/NvmExpressPei: Consume S3StorageDeviceInitList LockBox
MdeModulePkg/AhciPei: Add AHCI mode ATA device support in PEI
MdeModulePkg/SmmLockBoxLib: Use 'DEBUG_' prefix instead of 'EFI_D_'
MdeModulePkg/SmmLockBox(PEI): Remove an ASSERT in RestoreLockBox()
MdeModulePkg/SmmLockBoxLib: Support LockBox enlarge in UpdateLockBox()
OvmfPkg/LockBoxLib: Update the comments for API UpdateLockBox()
SecurityPkg/OpalPassword: Remove HW init codes and consume SSC PPI
SecurityPkg/HddPassword: Add Security feature set support for ATA dev
MdeModulePkg/UfsBlockIoPei: Correct use of 'DeviceIndex' in BlkIO PPI
MdeModulePkg/PartitionDxe: Ensure blocksize holds MBR (CVE-2018-12180)
MdeModulePkg/RamDiskDxe: Restrict on RAM disk size (CVE-2018-12180)
Hess Chen (1):
BaseTools/ECC: Add a new type of exception
Hsueh, Hong-chihX (1):
MdePkg/BasePeCoffLib: skip runtime relocation if reloc info is invalid
Jaben Carsey (14):
BaseTools: Move Identification file to Eot
BaseTools: cleanup LongFilePathSupport usage
BaseTools: create and use a standard shared variable for '*'
BaseTools: fix imports
MdeModulePkg: fix comments in BaseSortLib
BaseTools/build/build: refactor and move functions
BaseTools/Workspace/InfBuildData: move functions
BaseTools/DscBuildData: move function
BaseTools/AutoGen: move functions
BaseTools/GenFds/Capsule: move function logic
BaseTools/Common/Misc: move private functions
BaseTools/Common/Misc: remove uncalled code
BaseTools/Common/Misc: Cleanup the imports
BaseTools/build/build: delete variable
Jagadeesh Ujja (2):
SecurityPkg/AuthVariableLib: allow MM_STANDALONE drivers to use this library
MdePkg/Include: add MmServicesTableLib header file
Jeff Brasen (5):
MdeModulePkg/SdDxe: Fix potential NULL pointer access
EmbeddedPkg/PrePiMemoryAllocationLib: Added AllocateZeroPool()
MdeModulePkg/BaseSortLib: Enable for all module types
ArmPkg/ArmScmiDxe: Add clock enable function
EmbeddedPkg/PrePiLib: Correct function name
Jian J Wang (7):
CryptoPkg/IntrinsicLib: add missing BaseLib declaration
Upgrade OpenSSL to 1.1.0j
CryptoPkg/BaseCryptLib: split CryptPkcs7Verify.c on behalf of runtime
MdePkg/UefiDevicePathLib: Add sanity check for FilePath device path
MdePkg/UefiDevicePathLibDevicePathProtocol: Add sanity check for FilePath device path
UefiCpuPkg: restore strict page attributes via #DB in nonstop mode only
Maintainers.txt: remove unexpected unicode BOM
Jiaxin Wu (7):
MdeModulePkg/Dhcp4Dxe: Remove unnecessary NULL pointer check.
NetworkPkg/IScsiDxe: Remove unnecessary NULL pointer check.
NetworkPkg/DnsDxe: Remove unnecessary NULL pointer check.
MdeModulePkg/Ip4Dxe: Uninstall protocols when error happen in Driver Binding Start.
NetworkPkg/Ip6Dxe: Uninstall protocols when error happen in Driver Binding Start.
NetworkPkg/Ip6Dxe: Clean the invalid IPv6 configuration during driver start.
NetworkPkg/DnsDxe: [CVE-2018-12178] Check the received packet size before parsing the message.
Jiewen Yao (6):
MdeModulePkg/LockboxNullLib: clean up INF file.
BaseTool/GenC: Fix build error when type is BASE or USER_DEFINED.
MdePkg/Include: Add Nasm.inc
MdePkg/BaseLib: Add Shadow Stack Support for X86.
UefiCpuPkg/ExceptionLib: Add CET support.
UefiCpuPkg/PiSmmCpu: Add Shadow Stack Support for X86 SMM.
Jordan Justen (1):
OvmfPkg/build.sh: Enable flash for qemu 3 or later
Julien Grall (1):
Maintainers.txt: Update e-mail address for Julien Grall
Krzysztof Koch (1):
ShellPkg/UefiShellAcpiViewCommandLib: Add support for PPTT
Laszlo Ersek (47):
EmulatorPkg: require GCC48 or later
OvmfPkg: require GCC48 or later
Vlv2TbltDevicePkg: assume GCC48 or later
BaseTools/tools_def.template: fix up LF-only line terminator
BaseTools/tools_def.template: strip trailing whitespace
BaseTools/tools_def.template: remove GCC48_IA32_X64_DLINK_COMMON dead-end
BaseTools/tools_def.template: remove GCC47 leaf definitions
BaseTools/tools_def.template: propagate loss of GCC47 references
BaseTools/tools_def.template: remove GCC47 documentation
BaseTools/tools_def.template: remove GCC46 leaf definitions
BaseTools/tools_def.template: propagate loss of GCC46 references
BaseTools/tools_def.template: remove GCC46 documentation
BaseTools/tools_def.template: remove GCC45 leaf definitions
BaseTools/tools_def.template: propagate loss of GCC45 references
BaseTools/tools_def.template: remove GCC45 documentation
BaseTools/tools_def.template: remove GCC44 leaf definitions
BaseTools/tools_def.template: propagate loss of GCC44 references
BaseTools/tools_def.template: rename GCC44_ALL_CC_FLAGS to GCC48_ALL_CC_FLAGS
BaseTools/tools_def.template: eliminate GCC44_IA32_X64_DLINK_FLAGS
BaseTools/tools_def.template: rename GCC44_IA32_X64_DLINK_COMMON to GCC48_IA32_X64_DLINK_COMMON
BaseTools/tools_def.template: remove comment about GCC44 + LzmaF86Compress
BaseTools/tools_def.template: remove GCC44 documentation
ArmPkg/ArmSoftFloatLib: drop build flags specific to GCC46/GCC47
CryptoPkg/BaseCryptLib: drop build flags specific to GCC44
Revert "MdePkg: avoid __builtin_unreachable() on GCC v4.4"
BaseTools/BuildReport: fix report for platforms/arches without struct PCDs
ArmVirtPkg/ArmVirtQemuKernel: don't set PcdCPUCoresStackBase
ArmVirtPkg: don't set PcdRelocateVectorTable
ArmVirtPkg/{ArmVirtQemu,ArmVirtQemuKernel}: don't set PcdTrustzoneSupport
ArmVirtPkg: don't set PcdPostCodePropertyMask
ArmVirtPkg: clean up PcdSetNxForStack setting (applies to ArmVirtQemu only)
ArmVirtPkg/PrePi: drop wrong PcdCoreCount dependency
ArmVirtPkg: don't set PcdCoreCount
ArmVirtPkg: don't set PcdDebugClearMemoryValue
ArmVirtPkg: don't set PcdDebugPrintErrorLevel in RELEASE builds
ArmVirtPkg/ArmVirtXen: don't set PcdPL031RtcBase
ArmVirtPkg/ArmVirtXen: don't set PcdTerminalTypeGuidBuffer
ArmVirtPkg/ArmVirtXen: don't set PcdShellFile
ArmVirtPkg/ArmVirtXen: don't set PcdTurnOffUsbLegacySupport
ArmVirtPkg/ArmVirtXen: don't set Pcd*ImageVerificationPolicy
Maintainers: add TPM2 reviewers for OvmfPkg
Maintainers: specify the scope for OvmfPkg/ArmVirtPkg Xen module reviewers
MdeModulePkg/UefiBootManagerLib: fix LoadImage/StartImage status code rep.
OvmfPkg: add library to track boot option loading/starting on the console
OvmfPkg/PlatformBootManagerLib: display boot option loading/starting
ArmVirtPkg/ArmVirtQemu*: enable minimal Status Code Routing in DXE
ArmVirtPkg/PlatformBootManagerLib: display boot option loading/starting
Leif Lindholm (8):
ArmPkg: fix StandaloneMmMmuLib subdirectory case
ArmPkg: drop ArmBds remnant Pcds from .dec
ArmPkg: delete unused ArmTrustZoneSmc.h
AppPkg: fix webserver build for !Ia32/X64
IntelFrameworkModulePkg: fix build for AARCH64/ARM
IntelFrameworkPkg: fix build for AARCH64/ARM
SecurityPkg: fix package build on ARM
SignedCapsulePkg: enable package build for AARCH64/ARM
Liming Gao (12):
OvmfPkg: Don't include TftpDynamicCommand in XCODE5 tool chain
MdeModulePkg PCD: Add DynamicEx PcdVpdBaseAddress64 for non SPI platform
Maintainers.txt: Add the rule to hand over the package maintain role
BaseTools Script: Update ConvertFceToStructurePcd to report warning messages
MdeModulePkg: Correct PCD name in MdeModulePkg.uni
Readme.md: Add edk2 release tag and edk2 release plan
BaseTools GenFw: Fix XCODE5 build issue
BaseTools VolInfo: Fix XCODE5 build issue
BaseTools: Update PYTHON env to PYTHON_COMMAND
MdeModulePkg DxeCapsuleLibFmp: Update SupportCapsuleImage() for Fake Capsule
BaseTools: Remove unused txt files
Revert "BaseTools:BaseTools supports to the driver combination."
Liu Yu (1):
EmulatorPkg/build.sh: Fix 'run' path to simulator host executable
Marcin Wojtas (2):
MdeModulePkg/SdMmcPciHcDxe: Add an optional parameter in NotifyPhase
MdeModulePkg/SdMmcPciHcDxe: Allow overriding base clock frequency
Max Knutsen (1):
MdeModulePkg/ReportStatusCodeLib: Avoid using AllocatePool if possible
Meenakshi Aggarwal (1):
EmbeddedPkg: Fix Command Argument for SD/eMMC R/W operation.
Mike Maslenkin (1):
UefiCpuPkg/CpuExceptionHandlerLib: Fix spelling issue
Mike Turner (4):
MdePkg/BaseLib: Introduce CharToUpper and AsciiCharToUpper publicly
MdePkg/UefiDevicePathLib: Add a checking step
BaseTools/DevicePath: Add a checking step
MdePkg/BaseLib: Add Base64Encode() and Base64Decode()
Pete Batard (2):
EmbeddedPkg/Library: Add VirtualRealTimeClockLib
EmbeddedPkg/VirtualRealTimeClockLib: Fix correctness issues
Philippe Mathieu-Daude (1):
BaseTools: Fix build failure when specifying multiple BUILDTARGET
Ray Ni (10):
MdeModulePkg/PciBus: Shadow option ROM after BARs are programmed
MdeModulePkg/PciBus: Fix system hang when no PCI Option ROM exists
Maintainers.txt: Update mail address
MdeModulePkg/PciBus: Change PCI_IO_DEVICE.RomSize to UINT32 type
MdeModulePkg/PciBus: Correct typos
MdeModulePkg/PciBus: Fix a bug PPB MEM32 BAR isn't restored sometimes
UefiCpuPkg/MtrrLib: Fix a bug that may wrongly set memory <1MB to UC
ShellBinPkg: Ia32/X64 Shell binary update.
MdeModulePkg/HiiDatabase: Fix potential integer overflow (CVE-2018-12181)
MdeModulePkg/HiiImage: Fix stack overflow when corrupted BMP is parsed (CVE-2018-12181)
Sami Mujawar (36):
Maintainers.txt: Change DynamicTablesPkg maintainer
DynamicTablesPkg: Dynamic Tables Framework
DynamicTablesPkg: Table Generator definition
DynamicTablesPkg: Acpi Table Generator
DynamicTablesPkg: SMBIOS Table Generator
DynamicTablesPkg: DT Table Generator
DynamicTablesPkg: Standard NameSpace Objects
DynamicTablesPkg: Arm NameSpace Objects
DynamicTablesPkg: Configuration Manager Objects
DynamicTablesPkg: Configuration Manager Protocol
DynamicTablesPkg: Configuration Manager Helper
DynamicTablesPkg: Table Helper Library
DynamicTablesPkg: Dynamic Table Factory Protocol
DynamicTablesPkg: Dynamic Table Factory Dxe
DynamicTablesPkg: Dynamic Table Manager Dxe
DynamicTablesPkg: Arm Raw/DSDT/SSDT Generator
DynamicTablesPkg: Arm ACPI FADT Generator
DynamicTablesPkg: Arm ACPI MADT Generator
DynamicTablesPkg: Arm ACPI GTDT Generator
DynamicTablesPkg: Arm SPCR Table Generator
DynamicTablesPkg: Arm DBG2 Table Generator
DynamicTablesPkg: Arm PCI MCFG Table Generator
DynamicTablesPkg: Arm IORT Table Generator
DynamicTablesPkg: Fix protocol section
DynamicTablesPkg: Rename enum used for ID Mapping
DynamicTablesPkg: Add OEM Info
DynamicTablesPkg: DGB2: Update DBG2_DEBUG_PORT_DDI
DynamicTablesPkg: Remove GIC Distributor Id field
DynamicTablesPkg: Minor updates and fix typos
ArmPkg: Fix writes to GICv3 GICD_IROUTER<n> reg
Revert "DynamicTablesPkg: Minor updates and fix typos"
Revert "DynamicTablesPkg: Remove GIC Distributor Id field"
Revert "DynamicTablesPkg: DGB2: Update DBG2_DEBUG_PORT_DDI"
Revert "DynamicTablesPkg: Add OEM Info"
Revert "DynamicTablesPkg: Rename enum used for ID Mapping"
Revert "DynamicTablesPkg: Fix protocol section"
Sean Brogan (1):
MdeModulePkg/NvmExpressDxe: Report StatusCode for device init failure
Shenglei Zhang (37):
EmulatorPkg: Remove EdkShellBinPkg in FDF and DEC
Nt32Pkg: Remove EdkShellBinPkg in FDF and DEC
OvmfPkg: Remove EdkShellBinPkg in FDF
Vlv2TbltDevicePkg: Remove EdkShellBinPkg with ShellPkg
EdkShellBinPkg: Remove EdkShellBinPkg
EdkShellPkg: Remove EdkShellPkg
Maintainers.txt: Remove EdkShellPkg and EkdShellBinPkg
UnixPkg: Remove UnixPkg and update Maintainers.txt
MdeModulePkg: Remove PcdIdentifyMappingPageTablePtr
ShellPkg: Remove ShellPkg wrapper header files
BaseTools: Remove GenVtf
DuetPkg: Remove DuetPkg
BaseTools: Remove tools only used by DuetPkg
Maintainers.txt: Remove DuetPkg
ShellPkg/UefiShellDebug1CommandsLib: Remove the unused function CharToUpper
MdeModulePkg/EbcDebugger: Change function names
MdePkg/BaseLib: Remove definitions of two functions
MdeModulePkg/EbcDebugger: Use AsciiCharToUpper and CharToUpper
MdeModulePkg/DxeHttpLib: Use BaseLib api AsciiCharToUpper
ShellPkg/Shell: Use BaseLib api CharToUpper
ShellPkg/UefiShellLib: Use BaseLib api CharToUpper
MdePkg: Change function parameter type
MdeModulePkg/S3SaveStateDxe: Change function parameter types
MdeModulePkg/SmmS3SaveStateDxe: Change function parameter types
BaseTools/tools_def.template: Remove CYGGCC
OptionRomPkg/ReadMe.txt: Remove CYGGCC
BaseTools: Update MYTOOLS
BaseTools/tools_def.template: Remove VS2003 and VS2005
OptionRomPkg/ReadMe.txt: Remove VS2005
BaseTools/tools_def.template: Remove UNIXGCC
OvmfPkg/README: Remove UNIXGCC
BaseTools/tools_def.template: Remove ELFGCC
BaseTools/tools_def.template: Remove DDK3790
BaseTools/build_rule.template: Remove GCCLD
MdePkg/BaseLib: Change a variable type in a bitwise operation
MdeModulePkg/PropertiesTableAttributesDxe: Remove this driver
IntelSiliconPkg/MicrocodeUpdateDxe: Error message enhancement
Siyuan Fu (8):
ArmVirtPkg: Replace obsoleted network drivers from platform DSC/FDF.
ArmVirtPkg: Remove redundant library instances in ArmVirtQemuKernel.dsc
MdeModulePkg: Delete Tcp4Dxe in MdeModulePkg.
NetworkPkg: Remove some clarification from TcpDxe.inf
MdeModulePkg: Delete IScsiDxe in MdeModulePkg.
NetworkPkg: Remove some clarification from IScsiDxe.inf
MdeModulePkg: Delete UefiPxeBcDxe in MdeModulePkg.
NetworkPkg: Remove some clarification from UefiPxeBcDxe.inf
Solanki, Digant H (1):
IntelSiliconPkg\Include\IndustryStandard: Update IGD_OPREGION_MBOX3 Structure
Songpeng Li (3):
ShellPkg/TftpDynamicCommand: Change file writing method in tftp
NetworkPkg/IScsiDxe: Remove unused global variables.
NetworkPkg/Dhcp6Dxe: Remove an unused global variable.
Star Zeng (30):
Maintainers.txt: Update FmpDevicePkg maintainer
Maintainers.txt: Update MdeModulePkg maintainers
MdeModulePkg PeiCore: Remove the using of PcdPeiCoreMaxPeimPerFv
SecurityPkg Tcg(2)Pei: Remove the using of PcdPeiCoreMaxFvSupported
MdeModulePkg PeiCore: Remove the using of PcdPeiCoreMaxFvSupported
MdeModulePkg PeiCore: Remove the using of PcdPeiCoreMaxPpiSupported
OvmfPkg: Remove PcdPeiCoreMaxXXX PCDs' statement
Vlv2TbltDevicePkg: Remove PcdPeiCoreMaxXXX PCDs' statement
MdeModulePkg: Remove PcdPeiCoreMaxXXX PCDs
MdeModulePkg Variable: Add some missing changes for 9b18845
MdeModulePkg Variable: Abstract InitRealNonVolatileVariableStore
MdeModulePkg Variable: Move "extern XXX" to Variable.h
MdeModulePkg Variable: Not get NV PCD in VariableWriteServiceInitialize
MdeModulePkg Variable: Abstract VariableWriteServiceInitializeDxe/Smm
MdeModulePkg Variable: Remove CacheOffset in UpdateVariable()
MdeModulePkg Variable: type case VolatileBase to UINTN directly
MdeModulePkg: Add PcdEmuVariableNvModeEnable in dec
MdeModulePkg: Refine description a little for PcdEmuVariableNvStoreReserved
MdeModulePkg Variable: Add emulated variable NV mode support
MdeModulePkg VariablePei: Don't check BOOT_IN_RECOVERY_MODE
ArmVirtXen: Use merged variable driver for emulated NV mode
ArmVirtXen: Link VarCheckUefiLib NULL class library instance
BeagleBoardPkg: Use merged variable driver for emulated NV mode
QuarkMin: Use merged variable driver for emulated NV mode
CorebootPayloadPkg: Use merged variable driver for emulated NV mode
MdeModulePkg VariableStandaloneMm: Add PcdEmuVariableNvModeEnable in inf
MdeModulePkg: Remove EmuVariableRuntimeDxe
MdeModulePkg/PeiCore: Ensure FfsFileHeader 8 bytes aligned
MdeModulePkg/DxeCore: Ensure FfsFileHeader 8 bytes aligned
IntelFrameworkModulePkg/FwVolDxe: Ensure FfsFileHeader 8 bytes aligned
Stefan Berger (1):
OvmfPkg: Add TCG2 Configuration menu to the Device Manager menu
Sughosh Ganu (3):
ArmPkg/Include: Fix the SPM version SVC ID
StandaloneMM: Include the newly added library class for MMU functions
StandaloneMM: Update permissions for Standalone MM drivers memory area
Sumit Garg (2):
ArmPkg/OpteeLib: Add dummy RPC handler
ArmPkg/OpteeLib: Add OPTEE_SUCCESS return code
Sun, Zailiang (1):
Maintainers.txt: update Vlv2*Pkg maintainers.
Tomasz Michalec (2):
MdeModulePkg/SdMmcPciHcDxe: Add UhsSignaling to SdMmcOverride protocol
MdeModulePkg/SdMmcPciHcDxe: Add SwitchClockFreqPost to SdMmcOverride
Vijayenthiran Subramaniam (2):
MdeModulePkg/Variable: add debug logs in VariableServiceSetVariable
NetworkPkg/IScsiDxe: add debug logs for failed SetVariable attempts
Vladimir Olovyannikov (1):
MdeModulePkg/NonDiscoverablePciDeviceDxe: add missing validation
Vladimir Olovyannikov via edk2-devel (1):
ShellPkg/TftpDynamicCommand: Return proper status
Wang Fan (2):
NetworkPkg: Add WiFi Connection Manager to NetworkPkg
NetworkPkg: Fix Duplicate FreePool Error in WCM
Ye Ting (1):
Maintainers.txt: Change package maintainer and reviewer of CryptoPkg.
Yonghong Zhu (1):
Maintainers.txt: Update BaseTools maintainers
Yunhua Feng (3):
BaseTools: nametuple not have verbose parameter in python3
BaseTools: Remove unnecessary super function
BaseTools: replace long by int
Zhang, Chao B (6):
SecurityPkg: TCG Add more Event type
SecurityPkg: Update TCG PFP spec revision.
SecurityPkg/Tcg: Fix Warnings and Remarks reported by IASL
SecurityPkg/TCG: Upgrade UEFI supporting TCG spec info
MdeModulePkg:Tpm2Acpi.h: Upgrade UEFI supporting TCG spec info
Maintainers.txt: Change package maintainer and reviewer of SecurityPkg.
Zhao, ZhiqiangX (1):
BaseTools: AutoGen and GenFds share the parser data.
Zhichao Gao (8):
ShellPkg: add array index check for shell delay option
MdeModulePkg: change the function name ResetSystem
MdeModulePkg: Add the new API ResetSystem in the head file
MdeModulePkg: Add a new API ResetSystem for DXE ResetSystemLib
MdeModulePkg: Add a new API ResetSystem for Null version
MdeModulePkg: Add a new API ResetSystem for PEI ResetSystemLib
MdeModulePkg: Add a runtime library instance of ResetSystemLib
MdeModulePkg: Add the runtime ResetSystemLib in MdeModulePkg.dsc
Zhijux Fan (38):
BaseTools: Update nasm file build rule to support $(INC)
BaseTools: Add $(INC)-like support when compiling .nasm files
BaseTools:Build fail when PCD use in the [DEPEX] section of INF files
BaseTools:build break if the Path contains SingleFile.Ext
BaseTools:The BuildOptionPcd value is wrong
BaseTools: Fix Pcd Array changes build report issue.
BaseTools:Define Macro in Inf file, the pcdvalue Can't convert
BaseTool:Rename xrange() to range()
BaseTools:use iterate list to replace the itertools
BaseTools: Rename iteritems to items
BaseTools: replace get_bytes_le() to bytes_le
BaseTools:Solve the data sorting problem use python3
BaseTools: Update argparse arguments since it not have version now
BaseTools:Similar to octal data rectification
BaseTools/UPT:merge UPT Tool use Python2 and Python3
BaseTools: update Test scripts support python3
BaseTools/Scripts: Porting PackageDocumentTools code to use Python3
Basetools: It went wrong when use os.linesep
BaseTools:Fv BaseAddress must set If it not set
BaseTools:TestTools character encoding issue
BaseTools:Double carriage return inserted from Trim.py on Python3
BaseTools: change the Division Operator
BaseTools:There is extra blank line in datalog
BaseTools: Similar to octal data rectification
BaseTools: Update windows and linux run scripts file to use Python3
BaseTools:Update build tool to print python version information
BaseTools:Linux Python highest version check.
BaseTools: PCD value incorrect in structure pcd sku case.
BaseTools:StructurePCD value display incorrect in "Not used" section.
BaseTools:Fix a ECC issue
BaseTools:BaseTools supports to the driver combination.
BaseTools:Fixed build failure when specifying multiple BUILDTARGET
BaseTools:PCD value error in structure pcd sku case.
BaseTools:Build fail if define [DEPEX] in library inf
BaseTools:Some build generated files content are not ordered on linux
BaseTools:PackageDocumentTools import lib error occurs.
BaseTools:The BOM character is processed when python reads a file
BaseTools:Run packagedoc_cli.py to generate doc failed
yuchenlin (5):
Revert "OvmfPkg/QemuVideoDxe: list "UnalignedIoInternal.h" in the INF file"
Revert "OvmfPkg/QemuVideoDxe: VMWare SVGA device support"
Revert "OvmfPkg/QemuVideoDxe: Helper functions for unaligned port I/O."
Revert "OvmfPkg: VMWare SVGA display device register definitions"
OvmfPkg: simply use the Bochs interface for vmsvga
zwei4 (1):
Vlv2TbltDevicePkg:Fix build and boot failure of Minnowboard Max platform.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Tested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
|
