aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-04-23Fix typo, thanks to Andreas Faerber for spottingblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7235 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-23Use a more natural orderblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7234 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-23Fix i386-linux-user build (Laurent Desnogues)aliguori
This broke due to r7230. Signed-off-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7233 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-22monitor: Fix warning in do_info_numa (Jan Kiszka)aliguori
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7232 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-22Change RTC time drift IRQ re-injection (Gleb Natapov)aliguori
Currently IRQ are reinjected as soon as they are acknowledged to the RTC, but Windows sometimes do acknowledgement in a loop with global interrupt disabled waiting for interrupt to be cleared and it does not mask RTC vector in PIC/APIC while doing this. In such situation interrupt injection always fails and RTC interrupt is never cleared. Instead of reinjecting coalesced IRQs on acknowledgement the patch below reinjects them by accelerating RTC clock a bit. This way RTC interrupt is not constantly raced after coalesced interrupt. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7231 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-22put valid data into exit_int_info if needed (Gleb Natapov)aliguori
If fault happened during event delivery exit_int_info should contain valid info about the event on vm exit. Signed-off-by: Gleb Natapov <gleb@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7230 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-22implement qemu_blockalign (Stefano Stabellini)aliguori
this patch adds a buffer_alignment field to BlockDriverState and implements a qemu_blockalign function that uses that field to allocate a memory aligned buffer to be used by the block driver. buffer_alignment is initialized to 512 but each block driver can set a different value (at the moment none of them do). This patch modifies ide.c, block-qcow.c, block-qcow2.c and block.c to use qemu_blockalign instead of qemu_memalign. There is only one place left that still uses qemu_memalign to allocate buffers used by block drivers that is posix-aio-compat:handle_aiocb_rw because it is not possible to get the BlockDriverState from that function. However I think it is not important because posix-aio-compat already deals with driver specific code so it is supposed to know its own needs. Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7229 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-22xen: add -vga xenfb option, configure xenfb (Gerd Hoffmann)aliguori
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7228 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-22simplify vga selection (Gerd Hoffmann)aliguori
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7227 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-22xen: pv domain builder. (Gerd Hoffmann)aliguori
This adds domain building support for paravirtual domains to qemu. This allows booting xen guests directly with qemu, without Xend and the management stack. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7226 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-22xen: blk & nic configuration via cmd line. (Gerd Hoffmann)aliguori
This patch makes qemu create backend and frontend device entries in xenstore for devices configured on the command line. It will use qdisk and qnic backend names, so the qemu internal backends will be used. Disks can be created using -drive if=xen,file=... Nics can be created using -net nic,macaddr=... Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7225 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-22xen: add net backend driver. (Gerd Hoffmann)aliguori
This patch adds a network interface backend driver to qemu. It is a pure userspace implemention using the gntdev interface. It uses "qnet" as backend name in xenstore so it doesn't interfere with the netback backend (aka "vnif"). The network backend is hooked into the corrosponding qemu vlan, i.e. vif 0 is hooked into vlan 0. To make the packages actually arrive somewhere you additionally have to link the vlan to the outside world using the usual qemu command line options such as "-net tap,...". Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7224 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-22xen: add block device backend driver. (Gerd Hoffmann)aliguori
This patch adds a block device backend driver to qemu. It is a pure userspace implemention using the gntdev interface. It uses "qdisk" as backend name in xenstore so it doesn't interfere with the other existing backends (blkback aka "vbd" and tapdisk aka "tap"). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7223 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-22xen: add framebuffer backend driver (Gerd Hoffmann)aliguori
This patch adds a frsamebuffer (and kbd+mouse) backend driver. It it based on current xen-unstable code. It has been changed to make use of the common backend driver code. It also has been changed to compile with xen headers older than release 3.3 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7222 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-22xen: add console backend driver. (Gerd Hoffmann)aliguori
This patch adds a xenconsole backend driver. It it based on current xen-unstable code. It has been changed to make use of the common backend driver code. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7221 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-22xen: backend driver core (Gerd Hoffmann)aliguori
This patch adds infrastructure for xen backend drivers living in qemu, so drivers don't need to implement common stuff on their own. It's mostly xenbus management stuff: some functions to access xentore, setting up xenstore watches, callbacks on device discovery and state changes, handle event channel, ... Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7220 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-22xen: groundwork for xen support (Gerd Hoffmann)aliguori
- configure script and build system changes. - wind up new machine type. - add -xen-* command line options. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7219 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-22update .gitignore: add qemu-io (Gerd Hoffmann)aliguori
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7218 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21qcow2: Add plausibility check for L1/L2 entries (Kevin Wolf)aliguori
From: Kevin Wolf <kwolf@redhat.com> All L1 and L2 entries must point at the start of a cluster. If there is some offset into the cluster, the entry is corrupted. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7217 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21qcow2: Refcount checking code cleanup (Kevin Wolf)aliguori
This is purely cosmetical changes to make the code easier to read. Move L2 table processing from a deeply nested block to its own function, add some comments. Patch v2: Fix misplaced bracket causing false positives Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7216 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21Introduce qemu-img check subcommand (Kevin Wolf)aliguori
From: Kevin Wolf <kwolf@redhat.com> Now that block drivers can provide check functions, expose them through qemu-img. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7215 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21Introduce bdrv_check (Kevin Wolf)aliguori
From: Kevin Wolf <kwolf@redhat.com> Introduce a new bdrv_check function pointer for block drivers. Modify qcow2 to return an error status in check_refcounts(), so it can implement bdrv_check. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7214 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21qcow2: Fix warnings in check_refcount() (Kevin Wolf)aliguori
From: Kevin Wolf <kwolf@redhat.com> This code is currently only compiled when DEBUG_ALLOC is defined, so you usually don't see compiler warnings on it. This patch series wants to enable the code, so fix the format string warnings first. While we're at it, let's print error messages to stderr. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7213 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21sending NUMA topology to BIOS (Andre Przywara)aliguori
uses the QEMU firmware configuration interfacce to send the NUMA topology to the BIOS, which has to setup the tables. Only one firmware configuration channel is used. Signed-off-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7212 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21add info numa command to monitor (Andre Przywara)aliguori
adds an "info numa" command to the monitor to output the current topology. Since NUMA is advertised via static ACPI tables, no changes are possible during runtime. Signed-off-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7211 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21added -numa cmdline parameter parser (Andre Przywara)aliguori
adds a -numa command line parameter and sets a QEMU global array with the memory sizes. The CPU-to-node assignemnt is written into the CPUState. If no specific values for memory and CPUs are given, all resources will be split equally across all nodes. This code currently support only up to 64 virtual CPUs. Signed-off-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7210 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21Safety net for the cases where disassembler/translator disagree over ↵malc
instruction decoding Noticed by Mark Karpeles. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7209 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21net: Prevent multiple slirp instances (Jan Kiszka)aliguori
The slirp stack is full of global variables which prevents instantiating it more than once. Catch this during net_slirp_init to prevent more harm later on. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7208 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21slirp: Enhance host-guest redirection setup (Jan Kiszka)aliguori
Allow to establish a TCP/UDP connection redirection also via a monitor command 'host_net_redir'. Moreover, assume TCP as connection type if that parameter is omitted. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7204 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21net: Untangle nested qemu_send_packet (Jan Kiszka)aliguori
Queue packets that are send during an ongoing packet delivery. This ensures that packets will always arrive in their logical order at each client of a VLAN. Currently, slirp generates such immediate relies, and e.g. packet-sniffing clients on the same VLAN may get confused. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7203 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21monitor: Allow host_net_add/remove for all targets (Jan Kiszka)aliguori
There is nothing x86-specific in host_net_add/remove, so allow them for all targets. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7202 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21monitor: Improve host_net_add (Jan Kiszka)aliguori
Fix the documentation of the host_net_add monitor command and allow the user to pass no options at all. Moreover, inform the user on the monitor terminal if a request failed. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7201 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21net: Add support for capturing VLANs (Jan Kiszka)aliguori
This patch is derived from Tristan Gingold's patch. It adds a new VLAN client type that writes all traffic on the VLAN it is attached to into a pcap file. Such a file can then be analyzed offline with Wireshark or tcpdump. Besides rebasing and some minor cleanups, the major differences to the original version are: - support for enabling/disabling via the monitor (host_net_add/remove) - no special ordering of VLAN client list, qemu_send_packet now takes care of properly ordered packets - 64k default capturing limit (I hate tcpdump's default) Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7200 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21Allow empty params for check_params (Jan Kiszka)aliguori
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7199 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21slirp: Handle DHCP requests for specific IP (Jan Kiszka)aliguori
This adds proper handling of the ciaddr field as well as the "Requested IP Address" option to slirp's DHCP server. If the client requests an invalid or used IP, a NAK reply is sent, if it requests a specific but valid IP, this is now respected. NAK'ing invalid IPs is specifically useful when changing the slirp IP range via '-net user,ip=...' while the client saved its previously used address and tries to reacquire it. Now this will be NAK'ed and the client will start a new discovery round. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7198 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21net: Add parameter checks for VLAN clients (Jan Kiszka)aliguori
This aims at helping the user to find typos or other mistakes in parameter lists passed for VLAN client initialization. The existing parsing infrastructure does not allow a leaner approach, but this is better than nothing IMHO. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7197 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21net: Fix -net socket,listen (Jan Kiszka)aliguori
In case no symbolic name is provided when requesting VLAN connection via listening TCP socket ('-net socket,listen=...'), qemu crashes. This fixes the cause. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7196 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21net: Check device passed to host_net_remove (Jan Kiszka)aliguori
Make sure that we do not delete guest NICs via host_net_remove. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7195 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21MIPS signal handling fixes.pbrook
Also fixes a register corruption bug in do_sigreturn. When "returning" from sigreturn we are actually restoring the virtual cpu state from the signal frame. This is actually surprisingly hard to observe in practice. Typically an thread be blocked in a FUTEX_WAIT call when the signal arrives, so the effect is a spurious syscall success and the introduction of a subtle race condition. On x86/arm a syscall modifies a single word sized register, so do_sigreturn can just return that value. On MIPS a syscall clobbers multiple registers, so we need additional smarts. My solution is to invent a magic errno value that means "don't touch CPU state". git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7194 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21MIPS: Raise SIGSEGV, not SIGILL when an access faults.pbrook
Signed-off-by: Paul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7193 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21Fix target_siginfo ordering for MIPS.pbrook
Signed-off-by: Paul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7192 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-20Enable access to SYNCI_Step register in usermode emulation.pbrook
Signed-off-by: Paul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7191 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-19Build system: Fix dependency of qemu.1blueswir1
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7190 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-19kqemu: merge CONFIG_KQEMU and USE_KQEMUblueswir1
Basically a recursive ":%s/USE_KQEMU/CONFIG_KQEMU/g". Signed-off-by: Paul Bolle <pebolle@tiscali.nl> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7189 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-19Adds SM501 usb host emulation feature.aurel32
It makes usb keyboard available for sh4/r2d system emulation. The changes for "hw/usb-ohci.c" are as follows. - 'localmem_base' is introduced as OHCIState struct member. SM501 has a local memory, and it is used to pass and receive data with OHCI driver. OHCI driver accesses it with SH4 physical memory address, and SM501 accesses it with SM501 local address. 'localmem_base' holds where the SM501 local memory is mapped into SH4 physical address space. - Memory access functions modified to adjust address with 'localmem_base'. The functions are, ohci_read_*(), ohci_put_*(), and ohci_copy_*(). - ohci_read_hcca() and ohci_put_hcca() are introduced for more consistent implementation. For other source files, it does, - introduces usb_ohci_init_sm501(). - adds irq argument for SM501 initialization, to emulate USB interrupts. Signed-off-by: Shin-ichiro KAWASAKI <kawasaki@juno.dti.ne.jp> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7188 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-19linux-user: Linux kernel's fchmodat and faccessat have three args (no 4th arg)aurel32
In Linux kernel, fchmodat() and faccessat() take tree args. 4th value <int flags> is only processed by libc. Signed-off-by: Takashi YOSHII <takasi-y@ops.dti.ne.jp> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7187 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-19Fix indices in Menelaus save/load.balrog
Version increase won't be helpful here. Spotted by Sergei Steshenko / Blau Wirbel. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7186 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-18kqemu: only compile kqemu.o if actually neededblueswir1
kqemu.o is compiled even if kqemu support is disabled. This is useless (kqemu.o should provide nothing that is actually used in that case) and slightly confusing. So introduce CONFIG_KQEMU for optionally compiling kqemu.o. Signed-off-by: Paul Bolle <pebolle@tiscali.nl> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7185 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-18linux-user: fix IPCOP_sem* and implement sem*aurel32
Fix and cleanup IPCOP_sem* ipc calls handling and implement sem* syscalls. Riku: 1) Uglify whitespace so that diff gets smaller and easier to review 2) use __get_user in target_to_host_sembuf Signed-off-by: Kirill A. Shutemov <kirill@shutemov.name> Signed-off-by: Riku Voipio <riku.voipio@iki.fi> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7184 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-18qemu-io: Verify read data by patterns (Kevin Wolf)aliguori
This patch adds a -P option to read and readv which allows to compare the read data to a given pattern. This can be used to verify data written by write -P. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7182 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-20 07:48:27 +0000