aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-03-26chardev/char-fe: Allow NULL chardev in qemu_chr_fe_init()Peter Maydell
All the functions in char-fe.c handle the CharBackend having a NULL Chardev pointer, which means that the backend exists but is not connected to anything. The exception is qemu_chr_fe_init(), which will crash if passed a NULL Chardev pointer argument. This can happen for various boards if they're started with 'nodefaults': arm-softmmu/qemu-system-arm -S -nodefaults -M cubieboard riscv32-softmmu/qemu-system-riscv32 -nodefaults -M sifive_e Make qemu_chr_fe_init() accept a NULL chardev. This allows UART models to handle NULL chardev properties without generally needing to special case them or to manually create a NullChardev. Reported-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20180323152948.27048-1-peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-26iothread: fix breakage on windowsPeter Xu
OOB can enable iothread for parsing even on Windows. We need some tunes to enable that on Windows otherwise it'll break Windows users. This patch fixes the breakage on Windows with qemu-system-ppc.exe. Reported-by: Howard Spoelstra <hsp.cat7@gmail.com> Tested-by: Howard Spoelstra <hsp.cat7@gmail.com> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180322085630.23654-1-peterx@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-26scsi: turn "is this a SCSI device?" into a conditional hintPaolo Bonzini
If the user does not have permissions to send ioctls to the device (due to SELinux or cgroups, for example), the output can look like qemu-kvm: -device scsi-block,drive=disk: cannot get SG_IO version number: Operation not permitted. Is this a SCSI device? but this is confusing because the ioctl was blocked _before_ the device even received the SG_GET_VERSION_NUM ioctl. Therefore, for EPERM errors the suggestion should be eliminated. To make that simpler, change the code to use error_append_hint. Reported-by: Ala Hino <ahino@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-26chardev-socket: remove useless ifPaolo Bonzini
This trips Coverity, which believes the subsequent qio_channel_create_watch can dereference a NULL pointer. In reality, tcp_chr_connect's callers all have s->ioc properly initialized, since they are all rooted at tcp_chr_new_client. Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-26tcg: Really fix cpu_io_recompileRichard Henderson
We have confused the number of instructions that have been executed in the TB with the number of instructions needed to repeat the I/O instruction. We have used cpu_restore_state_from_tb, which means that the guest pc is pointing to the I/O instruction. The only time the answer to the later question is not 1 is when MIPS or SH4 need to re-execute the branch for the delay slot as well. We must rely on cpu->cflags_next_tb to generate the next TB, as otherwise we have a race condition with other guest cpus within the TB cache. Fixes: 0790f86861079b1932679d0f011e431aaf4ee9e2 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20180319031545.29359-1-richard.henderson@linaro.org> Tested-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-26vhost-user-test: add back memfd checkMarc-André Lureau
This revert commit fb68096da3d35e64c88cd610c1fa42766c58e92a, and modify test_read_guest_mem() to use different chardev names, when using memfd (_test_server_free(), where the chardev is removed, runs in idle). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20180215212552.26997-4-marcandre.lureau@redhat.com> Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-26vhost-user-test: do not hang if chardev creation failedMarc-André Lureau
Before the chardev name fix, the following error may happen: "attempt to add duplicate property 'chr-test' to object (type 'container')", due to races. Sadly, error_vprintf() uses g_test_message(), so you have to use read the cryptic --debug-log to see it. Later, it would make sense to use g_critical() instead, and catch errors with g_test_expect_message() (in glib 2.34). Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20180215212552.26997-5-marcandre.lureau@redhat.com> Acked-by: Maxime Coquelin <maxime.coquelin@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-26scripts/device-crash-test: Remove fixed isapc-with-iommu entryThomas Huth
Fixed in a0c167a18470831e359f0538c3cf67907808f13e ("x86_iommu: check if machine has PCI bus"). Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1521193892-15552-5-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-26hw/audio: Fix crashes when devices are used on ISA bus without DMAThomas Huth
The cs4231a, gus and sb16 sound cards crash QEMU when the user tries to instantiate them on a machine with DMA-less ISA bus (for example with "qemu-system-mips64el -M mips -device sb16"). Add proper checks to the realize functions to avoid the crashes. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1521193892-15552-4-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-26fdc: Exit if ISA controller does not support DMAAlexey Kardashevskiy
A "powernv" machine type defines an ISA bus but it does not add any DMA controller to it so it is possible to hit assert(fdctrl->dma) by adding "-machine powernv -device isa-fdc". This replaces assert() with an error message. Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru> [thuth: Slightly adjusted error message and updated scripts/device-crash-test] Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1521193892-15552-3-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-26hw/net/can: Fix segfaults when using the devices without busThomas Huth
The CAN devices can currently be used to crash QEMU, e.g.: $ x86_64-softmmu/qemu-system-x86_64 -device kvaser_pci Segmentation fault (core dumped) So we've got to add a proper check here that the corresponding bus is available. Signed-off-by: Thomas Huth <thuth@redhat.com> Message-Id: <1521193892-15552-2-git-send-email-thuth@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-26WHPX improve vcpu_post_run perfJustin Terry (VM)
This removes the additional call to WHvGetVirtualProcessorRegisters in whpx_vcpu_post_run now that the WHV_VP_EXIT_CONTEXT is returned in all WHV_RUN_VP_EXIT_CONTEXT structures. Signed-off-by: Justin Terry (VM) <juterry@microsoft.com> Message-Id: <1521039163-138-4-git-send-email-juterry@microsoft.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-26WHPX fix WHvSetPartitionProperty in PropertyCodeJustin Terry (VM)
This fixes a breaking change to WHvSetPartitionProperty to pass the 'in' PropertyCode on function invocation introduced in Windows Insider SDK 17110. Usage of this indicates the PropertyCode of the opaque PropertyBuffer passed in on function invocation. Also fixes the removal of the PropertyCode parameter from the WHV_PARTITION_PROPERTY struct as it is now passed to the function directly. Signed-off-by: Justin Terry (VM) <juterry@microsoft.com> Message-Id: <1521039163-138-3-git-send-email-juterry@microsoft.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-26WHPX fix WHvGetCapability out WrittenSizeInBytesJustin Terry (VM)
This fixes a breaking change to WHvGetCapability to include the 'out' WrittenSizeInBytes introduced in Windows Insider SDK 17110. This specifies on return the safe length to read into the WHV_CAPABILITY structure passed to the call. Signed-off-by: Justin Terry (VM) <juterry@microsoft.com> Message-Id: <1521039163-138-2-git-send-email-juterry@microsoft.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-03-26scripts/get_maintainer.pl: Print proper error message for missing $fileIan Jackson
If you pass scripts/get_maintainer.pl the name of a FIFO or other exciting object (/dev/stdin, for example), it would falsely print "file not found". Instead: stat the object rather than using -f so that we do not mind if the object is not a file; and print the errno value in the error message. Signed-off-by: Ian Jackson <Ian.Jackson@eu.citrix.com> CC: Thomas Huth <thuth@redhat.com> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Stefano Stabellini <sstabellini@kernel.org> CC: Anthony PERARD <anthony.perard@citrix.com> Message-Id: <1520535787-6223-13-git-send-email-ian.jackson@eu.citrix.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Ian Jackson <ian.jackson@eu.citrix.com>
2018-03-25Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20180323' into staging target-arm queue: * arm/translate-a64: don't lose interrupts after unmasking via write to DAIF * sdhci: fix incorrect use of Error * * hw/intc/arm_gicv3: Fix secure-GIC NS ICC_PMR and ICC_RPR accesses * hw/arm/bcm2836: Use the Cortex-A7 instead of Cortex-A15 * i.MX: Support serial RS-232 break properly * mach-virt: Set VM's SMBIOS system version to mc->name * target/arm: Honour MDCR_EL2.TDE when routing exceptions due to BKPT/BRK * target/arm: Factor out code to calculate FSR for debug exceptions * target/arm: Set FSR for BKPT, BRK when raising exception * target/arm: Always set FAR to a known unknown value for debug exceptions # gpg: Signature made Fri 23 Mar 2018 18:48:57 GMT # gpg: using RSA key 3C2525ED14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" # gpg: aka "Peter Maydell <pmaydell@gmail.com>" # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20180323: target/arm: Always set FAR to a known unknown value for debug exceptions target/arm: Set FSR for BKPT, BRK when raising exception target/arm: Factor out code to calculate FSR for debug exceptions target/arm: Honour MDCR_EL2.TDE when routing exceptions due to BKPT/BRK mach-virt: Set VM's SMBIOS system version to mc->name i.MX: Support serial RS-232 break properly hw/arm/bcm2836: Use the Cortex-A7 instead of Cortex-A15 hw/intc/arm_gicv3: Fix secure-GIC NS ICC_PMR and ICC_RPR accesses sdhci: fix incorrect use of Error * arm/translate-a64: treat DISAS_UPDATE as variant of DISAS_EXIT Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-24Merge remote-tracking branch ↵Peter Maydell
'remotes/dgilbert/tags/pull-migration-20180323a' into staging Migration fixes for 2.12 All small fixes. Dan's is a missing piece of a cleanup that finally completes something, and between Paolo, Dan and myself we recon it's still on the edge of being a bug fix. # gpg: Signature made Fri 23 Mar 2018 20:17:40 GMT # gpg: using RSA key 0516331EBC5BFDE7 # gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" # Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7 * remotes/dgilbert/tags/pull-migration-20180323a: migration: Fix block migration flag case migration/block: compare only read blocks against the rate limiter migration/block: limit the number of parallel I/O requests migration: Fix rate limiting issue on RDMA migration migration: convert socket server to QIONetListener Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-24Merge remote-tracking branch 'remotes/marcel/tags/rdma-pull-request' into ↵Peter Maydell
staging * fix PVRDMA compilation errors and warnings * implement query_qp for the PVRDMA device * fix make - switch from -I to -iquote # gpg: Signature made Fri 23 Mar 2018 15:39:23 GMT # gpg: using RSA key 36D4C0F0CF2FE46D # gpg: Good signature from "Marcel Apfelbaum <marcel@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: B1C6 3A57 F92E 08F2 640F 31F5 36D4 C0F0 CF2F E46D * remotes/marcel/tags/rdma-pull-request: hw/rdma: Fix 32-bit compilation hw/rdma: Use correct print format in CHK_ATTR macro hw/rdma: Change host_virt to void * hw/rdma: fix clang compilation errors make: switch from -I to -iquote rdma: fix up include directives hw/rdma: Add support for Query QP verb to pvrdma device hw/rdma: Add Query QP operation Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-23target/arm: Always set FAR to a known unknown value for debug exceptionsPeter Maydell
For debug exceptions due to breakpoints or the BKPT instruction which are taken to AArch32, the Fault Address Register is architecturally UNKNOWN. We were using that as license to simply not set env->exception.vaddress, but this isn't correct, because it will expose to the guest whatever old value was in that field when arm_cpu_do_interrupt_aarch32() writes it to the guest IFSR. That old value might be a FAR for a previous guest EL2 or secure exception, in which case we shouldn't show it to an EL1 or non-secure exception handler. It might also be a non-deterministic value, which is bad for record-and-replay. Clear env->exception.vaddress before taking breakpoint debug exceptions, to avoid this minor information leak. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180320134114.30418-5-peter.maydell@linaro.org
2018-03-23target/arm: Set FSR for BKPT, BRK when raising exceptionPeter Maydell
Now that we have a helper function specifically for the BRK and BKPT instructions, we can set the exception.fsr there rather than in arm_cpu_do_interrupt_aarch32(). This allows us to use our new arm_debug_exception_fsr() helper. In particular this fixes a bug where we were hardcoding the short-form IFSR value, which is wrong if the target exception level has LPAE enabled. Fixes: https://bugs.launchpad.net/qemu/+bug/1756927 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180320134114.30418-4-peter.maydell@linaro.org
2018-03-23target/arm: Factor out code to calculate FSR for debug exceptionsPeter Maydell
When a debug exception is taken to AArch32, it appears as a Prefetch Abort, and the Instruction Fault Status Register (IFSR) must be set. The IFSR has two possible formats, depending on whether LPAE is in use. Factor out the code in arm_debug_excp_handler() which picks an FSR value into its own utility function, update it to use arm_fi_to_lfsc() and arm_fi_to_sfsc() rather than hard-coded constants, and use the correct condition to select long or short format. In particular this fixes a bug where we could select the short format because we're at EL0 and the EL1 translation regime is not using LPAE, but then route the debug exception to EL2 because of MDCR_EL2.TDE and hand EL2 the wrong format FSR. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180320134114.30418-3-peter.maydell@linaro.org
2018-03-23target/arm: Honour MDCR_EL2.TDE when routing exceptions due to BKPT/BRKPeter Maydell
The MDCR_EL2.TDE bit allows the exception level targeted by debug exceptions to be set to EL2 for code executing at EL0. We handle this in the arm_debug_target_el() function, but this is only used for hardware breakpoint and watchpoint exceptions, not for the exception generated when the guest executes an AArch32 BKPT or AArch64 BRK instruction. We don't have enough information for a translate-time equivalent of arm_debug_target_el(), so instead make BKPT and BRK call a special purpose helper which can do the routing, rather than the generic exception_with_syndrome helper. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180320134114.30418-2-peter.maydell@linaro.org
2018-03-23mach-virt: Set VM's SMBIOS system version to mc->nameWei Huang
Instead of using "1.0" as the system version of SMBIOS, we should use mc->name for mach-virt machine type to be consistent other architectures. With this patch, "dmidecode -t 1" (e.g., "-M virt-2.12,accel=kvm") will show: Handle 0x0100, DMI type 1, 27 bytes System Information Manufacturer: QEMU Product Name: KVM Virtual Machine Version: virt-2.12 Serial Number: Not Specified ... instead of: Handle 0x0100, DMI type 1, 27 bytes System Information Manufacturer: QEMU Product Name: KVM Virtual Machine Version: 1.0 Serial Number: Not Specified ... For backward compatibility, we allow older machine types to keep "1.0" as the default system version. Signed-off-by: Wei Huang <wei@redhat.com> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 20180322212318.7182-1-wei@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-23i.MX: Support serial RS-232 break properlyTrent Piepho
Linux does not detect a break from this IMX serial driver as a magic sysrq. Nor does it note a break in the port error counts. The former is because the Linux driver uses the BRCD bit in the USR2 register to trigger the RS-232 break handler in the kernel, which is where sysrq hooks in. The emulated UART was not setting this status bit. The latter is because the Linux driver expects, in addition to the BRK bit, that the ERR bit is set when a break is read in the FIFO. A break should also count as a frame error, so add that bit too. Cc: Andrey Smirnov <andrew.smirnov@gmail.com> Signed-off-by: Trent Piepho <tpiepho@impinj.com> Message-id: 20180320013657.25038-1-tpiepho@impinj.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-23hw/arm/bcm2836: Use the Cortex-A7 instead of Cortex-A15Peter Maydell
The BCM2836 uses a Cortex-A7, not a Cortex-A15. Update the device to use the correct CPU. https://www.raspberrypi.org/documentation/hardware/raspberrypi/bcm2836/QA7_rev3.4.pdf When the BCM2836 was introduced (bad5623690b) the Cortex-A7 was not available, so the very similar Cortex-A15 was used. Since dcf578ed8ce we can model the correct core. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair@alistair23.me> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20180319110215.16755-1-peter.maydell@linaro.org
2018-03-23hw/intc/arm_gicv3: Fix secure-GIC NS ICC_PMR and ICC_RPR accessesPeter Maydell
If the GIC has the security extension support enabled, then a non-secure access to ICC_PMR must take account of the non-secure view of interrupt priorities, where real priorities 0x00..0x7f are secure-only and not visible to the non-secure guest, and priorities 0x80..0xff are shown to the guest as if they were 0x00..0xff. We had the logic here wrong: * on reads, the priority is in the secure range if bit 7 is clear, not if it is set * on writes, we want to set bit 7, not mask everything else Our ICC_RPR read code had the same error as ICC_PMR. (Compare the GICv3 spec pseudocode functions ICC_RPR_EL1 and ICC_PMR_EL1.) Fixes: https://bugs.launchpad.net/qemu/+bug/1748434 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 20180315133441.24149-1-peter.maydell@linaro.org
2018-03-23sdhci: fix incorrect use of Error *Paolo Bonzini
Detected by Coverity (CID 1386072, 1386073, 1386076, 1386077). local_err was unused, and this made the static analyzer unhappy. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 20180320151355.25854-1-pbonzini@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-23arm/translate-a64: treat DISAS_UPDATE as variant of DISAS_EXITVictor Kamensky
In OE project 4.15 linux kernel boot hang was observed under single cpu aarch64 qemu. Kernel code was in a loop waiting for vtimer arrival, spinning in TC generated blocks, while interrupt was pending unprocessed. This happened because when qemu tried to handle vtimer interrupt target had interrupts disabled, as result flag indicating TCG exit, cpu->icount_decr.u16.high, was cleared but arm_cpu_exec_interrupt function did not call arm_cpu_do_interrupt to process interrupt. Later when target reenabled interrupts, it happened without exit into main loop, so following code that waited for result of interrupt execution run in infinite loop. To solve the problem instructions that operate on CPU sys state (i.e enable/disable interrupt), and marked as DISAS_UPDATE, should be considered as DISAS_EXIT variant, and should be forced to exit back to main loop so qemu will have a chance processing pending CPU state updates, including pending interrupts. This change brings consistency with how DISAS_UPDATE is treated in aarch32 case. CC: Peter Maydell <peter.maydell@linaro.org> CC: Alex Bennée <alex.bennee@linaro.org> CC: qemu-stable@nongnu.org Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Victor Kamensky <kamensky@cisco.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 1521526368-1996-1-git-send-email-kamensky@cisco.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-23migration: Fix block migration flag caseDr. David Alan Gilbert
Fix the case where when a migration with a bad protocol is tried, we leave the block migration capability set. (This is a cut down version of my 'migration: Fix block failure cases' where it's other case was fixed by Peter's dd0ee30caeebbd ) Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-Id: <20180316202114.32345-1-dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-03-23Merge remote-tracking branch 'remotes/ericb/tags/pull-qapi-2018-03-23' into ↵Peter Maydell
staging qapi patches for 2018-03-12, 2.12-rc1 - Peter Xu: 0/4 Turn OOB off for 2.12-rc1, revert OOB tests - Eric Blake: qapi: Force UTF8 encoding when parsing qapi files # gpg: Signature made Fri 23 Mar 2018 17:35:49 GMT # gpg: using RSA key A7A16B4A2527436A # gpg: Good signature from "Eric Blake <eblake@redhat.com>" # gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" # gpg: aka "[jpeg image of size 6874]" # Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A * remotes/ericb/tags/pull-qapi-2018-03-23: qapi: Force UTF8 encoding when parsing qapi files Revert "monitor: enable IO thread for (qmp & !mux) typed" Revert "tests: qmp-test: verify command batching" Revert "tests: qmp-test: add oob test" Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-23qapi: Force UTF8 encoding when parsing qapi filesEric Blake
Commit d4e5ec877 already fixed things to work around Python 3's lame bug of having LC_ALL=C not be 8-bit clean, when parsing the main QMP qapi files; but failed to do likewise in the tests directory. As a result, running 'LC_ALL=C make check' fails on escape-too-big and unicode-str when using python 3 with a nasty stack trace instead of the intended graceful error message that QAPI doesn't yet support 8-bit data (the two tests contain Unicode é, when parsed in UTF-8; they represent something different when parsed in a proper single-byte C locale, but that doesn't matter to the error message printed out, provided that brain-dead Python hasn't first choked on the input instead of being 8-bit clean). Ideally, we'd teach the qapi generator scripts to automatically slurp things in using UTF-8 regardless of locale, and to honor content that is not limited to 7 bit data rather than gracefully erroring out; but until then, since our graceful error depends on python parsing 8-bit data (even if nothing we generate uses 8-bit data), our quick fix is to use the right locale when running these tests. Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20180319205040.1113423-1-eblake@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
2018-03-23Revert "monitor: enable IO thread for (qmp & !mux) typed"Peter Xu
This reverts commit 3fd2457d18edf5736f713dfe1ada9c87a9badab1. Enabling OOB caused several iotests failures; due to the imminent 2.12 release, the safest action is to disable OOB for now. If other patches fix the issues that iotests exposed, it may be turned back on in time for the release, otherwise it will be 2.13 material; either way, the framework changes not reverted now do not hurt if they remain as part of the 2.12 release. Additionally, revert the tests in the patch 02130314d8 ("qmp: introduce QMPCapability", 2018-03-19), as both parts must be reverted at once to keep 'make check' passing. Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180323140821.28957-2-peterx@redhat.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> [eblake: reorder/squash commits, enhance commit message] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-23Revert "tests: qmp-test: verify command batching"Peter Xu
This reverts commit 91ad45061af0fe44ac5dadb5bedaf4d7a08077c8. Enabling OOB caused several iotests failures; due to the imminent 2.12 release, the safest action is to disable OOB, but first we have to revert tests that rely on OOB. Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180323140821.28957-4-peterx@redhat.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> [eblake: reorder commits, enhance commit message] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-23Revert "tests: qmp-test: add oob test"Peter Xu
This reverts commit d003f7a8f9cafe50119975844fa01afc2baf41fb. Enabling OOB caused several iotests failures; due to the imminent 2.12 release, the safest action is to disable OOB, but first we have to revert tests that rely on OOB. Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <20180323140821.28957-3-peterx@redhat.com> Tested-by: Christian Borntraeger <borntraeger@de.ibm.com> [eblake: reorder commits, enhance commit message] Signed-off-by: Eric Blake <eblake@redhat.com>
2018-03-23migration/block: compare only read blocks against the rate limiterPeter Lieven
only read_done blocks are in the queued to be flushed to the migration stream. submitted blocks are still in flight. Signed-off-by: Peter Lieven <pl@kamp.de> Message-Id: <1520507908-16743-6-git-send-email-pl@kamp.de> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-03-23migration/block: limit the number of parallel I/O requestsPeter Lieven
the current implementation submits up to 512 I/O requests in parallel which is much to high especially for a background task. This patch adds a maximum limit of 16 I/O requests that can be submitted in parallel to avoid monopolizing the I/O device. Signed-off-by: Peter Lieven <pl@kamp.de> Message-Id: <1520507908-16743-5-git-send-email-pl@kamp.de> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-03-23migration: Fix rate limiting issue on RDMA migrationLidong Chen
RDMA migration implement save_page function for QEMUFile, but ram_control_save_page do not increase bytes_xfer. So when doing RDMA migration, it will use whole bandwidth. Signed-off-by: Lidong Chen <lidongchen@tencent.com> Message-Id: <1520692378-1835-1-git-send-email-lidongchen@tencent.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-03-23migration: convert socket server to QIONetListenerDaniel P. Berrange
Instead of creating a QIOChannelSocket directly for the migration server socket, use a QIONetListener. This provides the ability to listen on multiple sockets at the same time, so enables full support for IPv4/IPv6 dual stack. For example, '$QEMU -incoming tcp::9000' now correctly listens on both 0.0.0.0 and :: at the same time, instead of only on 0.0.0.0. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Message-Id: <20180312141714.7223-1-berrange@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2018-03-23hw/rdma: Fix 32-bit compilationYuval Shaia
Use the correct printf formats, so that a 32-bit compile doesn't spit out lots of warnings about %lx being incompatible with uint64_t. Suggested-by: Eric Blake <eblake@redhat.com> Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180322095220.9976-4-yuval.shaia@oracle.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
2018-03-23hw/rdma: Use correct print format in CHK_ATTR macroYuval Shaia
Macro should not cast the given variable to u64 instead it should use the supplied format argument (fmt). Reported-by: Eric Blake <eblake@redhat.com> Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180322095220.9976-3-yuval.shaia@oracle.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
2018-03-23hw/rdma: Change host_virt to void *Yuval Shaia
To avoid compilation warnings on 32-bit machines: rdma_backend.c: In function 'rdma_backend_create_mr': rdma_backend.c:409:37: error: cast to pointer from integer of different size [-Werror=int-to-pointer-cast] mr->ibmr = ibv_reg_mr(pd->ibpd, (void *)addr, length, access); Reported-by: Eric Blake <eblake@redhat.com> Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Eric Blake <eblake@redhat.com> Tested-by: Eric Blake <eblake@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20180322095220.9976-2-yuval.shaia@oracle.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
2018-03-23hw/rdma: fix clang compilation errorsMarcel Apfelbaum
Fix some enum castings and extra parentheses. Reported-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Message-Id: <20180321140316.96045-1-marcel@redhat.com> Reviewed-by: Yuval Shaia <yuval.shaia@oracle.com>
2018-03-23make: switch from -I to -iquoteMichael S. Tsirkin
Our rule right now is to use <> for external headers, "" for internal ones. The idea was to avoid conflicts between e.g. a system file named <trace.h> and an internal one by the same name. Unfortunately we use -I compiler flag so it does not help: a system file doing #include <trace.h> will still pick up ours first. To fix, switch to -iquote which is supported by both gcc and clang and only affects #include "" directives. As a side effect, this catches any future uses of #include <> for internal headers. Suggested-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
2018-03-23rdma: fix up include directivesMichael S. Tsirkin
Our rule right now is to use <> for external headers only. RDMA code violates that, fix it up. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
2018-03-23hw/rdma: Add support for Query QP verb to pvrdma deviceYuval Shaia
This IB verb is needed by some applications - implement it. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
2018-03-23hw/rdma: Add Query QP operationYuval Shaia
This operation is needed by rdma devices - implement it. Signed-off-by: Yuval Shaia <yuval.shaia@oracle.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com>
2018-03-23Merge remote-tracking branch 'remotes/borntraeger/tags/s390x-20180323' into ↵Peter Maydell
staging s390x: Fixes for 2.12 - Fix for the s390 cpumodel - Forbid multifunction PCI devices # gpg: Signature made Fri 23 Mar 2018 09:06:31 GMT # gpg: using RSA key 117BBC80B5A61C7C # gpg: Good signature from "Christian Borntraeger (IBM) <borntraeger@de.ibm.com>" # Primary key fingerprint: F922 9381 A334 08F9 DBAB FBCA 117B BC80 B5A6 1C7C * remotes/borntraeger/tags/s390x-20180323: s390x/cpumodel: fix feature groups and breakage of MSA8 s390x/pci: forbid multifunction pci device Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-03-23s390x/cpumodel: fix feature groups and breakage of MSA8Christian Borntraeger
Since commit 46a99c9f73c7 ("s390x/cpumodel: model PTFF subfunctions for Multiple-epoch facility") -cpu help no longer shows the MSA8 feature group. Turns out that we forgot to add the new MEPOCH_PTFF group enum. Fixes: 46a99c9f73c7 ("s390x/cpumodel: model PTFF subfunctions for Multiple-epoch facility") Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-03-23s390x/pci: forbid multifunction pci deviceYi Min Zhao
Currently we don't support pci multifunction. If a pci with multifucntion is plugged, the guest will spin forever. This patch fixes this. Signed-off-by: Yi Min Zhao <zyimin@linux.vnet.ibm.com> Reviewed-by: Pierre Morel <pmorel@linux.vnet.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
2018-03-22gitmodules: Use the QEMU mirror of qemu-palcodePeter Maydell
We have a mirror of the qemu-palcode repository on git.qemu.org; use that instead of the upstream github, in line with our general policy of keeping and using a mirror for submodules. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20180319131743.3885-1-peter.maydell@linaro.org
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-25 10:34:37 +0000