aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-07-10target/mips/mxu: Add S16LDD S16STD S16LDI S16SDI instructionsSiarhei Volkau
These instructions are all load/store a halfword from memory and put it into/get it from MXU register in various combinations. I-suffix instructions modify the base address GPR by offset provided. Signed-off-by: Siarhei Volkau <lis8215@gmail.com> Message-Id: <20230608104222.1520143-22-lis8215@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-07-10target/mips/mxu: Add S8STD S8LDI S8SDI instructionsSiarhei Volkau
These instructions are all load/store a byte from memory and put it into/get it from MXU register in various combinations. I-suffix instructions modify the base address GPR by offset provided. Signed-off-by: Siarhei Volkau <lis8215@gmail.com> Message-Id: <20230608104222.1520143-21-lis8215@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-07-10target/mips/mxu: Add Q8ADDE Q8ACCE D8SUM D8SUMC instructionsSiarhei Volkau
These instructions are all dual 8-bit addition/subtraction in various combinations. Most instructions are grouped in pool14, see the opcode organization in the file. Signed-off-by: Siarhei Volkau <lis8215@gmail.com> Message-Id: <20230608104222.1520143-20-lis8215@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-07-10target/mips/mxu: Add Q16ACC Q16ACCM D16ASUM instructionsSiarhei Volkau
These instructions are all dual 16-bit addition/subtraction in various combinations. The instructions are grouped in pool13, see the opcode organization in the file. Signed-off-by: Siarhei Volkau <lis8215@gmail.com> Message-Id: <20230608104222.1520143-19-lis8215@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-07-10target/mips/mxu: Add D32ADDC instructionSiarhei Volkau
The instruction adds two 32-bit values with respect to corresponding carry flags in MXU_CR. XRa += XRb + LeftCarry flag; XRd += XRc + RightCarry flag; Suddenly, it doesn't modify carry flags as a result of addition. Signed-off-by: Siarhei Volkau <lis8215@gmail.com> Message-Id: <20230608104222.1520143-18-lis8215@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-07-10target/mips/mxu: Add D32ACC D32ACCM D32ASUM instructionsSiarhei Volkau
These instructions are all dual 32-bit addition/subtraction in various combinations. The instructions are grouped in pool12, see the opcode organization in the file. Signed-off-by: Siarhei Volkau <lis8215@gmail.com> Message-Id: <20230608104222.1520143-17-lis8215@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-07-10target/mips/mxu: Add D32ADD instructionSiarhei Volkau
The instruction adds/subtracts two 32-bit values in XRb and XRc. Placing results in XRa and XRd and updates carry bits for each path in the MXU control register. Signed-off-by: Siarhei Volkau <lis8215@gmail.com> Message-Id: <20230608104222.1520143-16-lis8215@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-07-10target/mips/mxu: Add Q16ADD instructionSiarhei Volkau
The instruction adds/subtracts four 16-bit packed in XRb and XRc. Placing packed 16-bit results in XRa and XRd. Signed-off-by: Siarhei Volkau <lis8215@gmail.com> Message-Id: <20230608104222.1520143-15-lis8215@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-07-10target/mips/mxu: Add S16MAD instructionSiarhei Volkau
The instruction is similar to multiply and accumulate but works with MXU registers set. Signed-off-by: Siarhei Volkau <lis8215@gmail.com> Message-Id: <20230608104222.1520143-14-lis8215@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-07-10target/mips/mxu: Add D16MADL instructionSiarhei Volkau
The instruction is similar to multiply and accumulate but works with MXU registers set. Signed-off-by: Siarhei Volkau <lis8215@gmail.com> Message-Id: <20230608104222.1520143-13-lis8215@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-07-10target/mips/mxu: Add D16MACF D16MACE instructionsSiarhei Volkau
These instructions are close to D16MAC so common generation function provided. Signed-off-by: Siarhei Volkau <lis8215@gmail.com> Message-Id: <20230608104222.1520143-12-lis8215@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-07-10target/mips/mxu: Add D16MULF D16MULE instructionsSiarhei Volkau
These instructions are part of pool3, see the grand tree above in the file. The instructions are close to D16MUL so common generation function provided. Signed-off-by: Siarhei Volkau <lis8215@gmail.com> Message-Id: <20230608104222.1520143-11-lis8215@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-07-10target/mips/mxu: Add S32CPS D16CPS Q8ABD Q16SAT insnsSiarhei Volkau
These instructions are part of pool2, see the grand tree above in the file. Signed-off-by: Siarhei Volkau <lis8215@gmail.com> Message-Id: <20230608104222.1520143-10-lis8215@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-07-10target/mips/mxu: Add Q8ADD instructionSiarhei Volkau
This instruction is used to add/subtract quadruple 8-bit values to another quadruple in parallel. Signed-off-by: Siarhei Volkau <lis8215@gmail.com> Message-Id: <20230608104222.1520143-9-lis8215@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-07-10target/mips/mxu: Add S32SLT D16SLT D16AVG[R] Q8AVG[R] insnsSiarhei Volkau
These instructions are part of pool1, see the grand tree above in the file. Q8ADD is part of pool1 too but belong to another category of instructions, thus will be made in later patches. Signed-off-by: Siarhei Volkau <lis8215@gmail.com> Message-Id: <20230608104222.1520143-8-lis8215@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-07-10target/mips/mxu: Fix D16MAX D16MIN Q8MAX Q8MIN instructionsSiarhei Volkau
These instructions were designed that they overwrite source register during partial storing of result. Signed-off-by: Siarhei Volkau <lis8215@gmail.com> Message-Id: <20230608104222.1520143-7-lis8215@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-07-10target/mips/mxu: Add Q8SLT Q8SLTU instructionsSiarhei Volkau
These instructions are used to set bits depending on comparison result in each byte respectively. Signed-off-by: Siarhei Volkau <lis8215@gmail.com> Message-Id: <20230608104222.1520143-6-lis8215@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-07-10target/mips/mxu: Add S32MADD/MADDU/MSUB/MSUBU instructionsSiarhei Volkau
These instructions used to multiply 2x32-bit GPR sources & accumulate result into 64-bit pair of XRF registers. These instructions stain HI/LO registers with the final result. Their opcode is close to the MIPS32R1 MADD[U]/MSUB[U], so it have to call decode_opc_special2_legacy when failing to find MXU opcode. Moreover, it solves issue with reinventing MUL and malfunction MULU/CLZ/CLO instructions. Signed-off-by: Siarhei Volkau <lis8215@gmail.com> Message-Id: <20230608104222.1520143-5-lis8215@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-07-10target/mips/mxu: Add LXW LXB LXH LXBU LXHU instructionsSiarhei Volkau
These instructions used to load from memory to GPR via indexed address divided by base and index parts in GPR registers. Signed-off-by: Siarhei Volkau <lis8215@gmail.com> Message-Id: <20230608104222.1520143-4-lis8215@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-07-10target/mips: Add support of two XBurst CPUsSiarhei Volkau
XBurstR1 - is the MIPS32R1 CPU which aims to cover all Ingenic SoCs older than JZ4770 and some newer. XBurstR2 - is the MIPS32R2 CPU which aims to cover all Ingenic SoCs starting from to JZ4770. Signed-off-by: Siarhei Volkau <lis8215@gmail.com> Message-Id: <20230608104222.1520143-3-lis8215@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-07-10target/mips: Add emulation of MXU instructions for 32-bit load/storeSiarhei Volkau
Add support for emulating: - S32LDDV and S32LDDVR - S32STD and S32STDR - S32STDV and S32STDVR MXU instructions. Add support for emulating MXU instructions with address register post-modify counterparts: - S32LDI and S32LDIR - S32LDIV and S32LDIVR - S32SDI and S32SDIR - S32SDIV and S32SDIVR Refactor support for emulating the S32LDD and S32LDDR instructions. Signed-off-by: Siarhei Volkau <lis8215@gmail.com> Message-Id: <20230608104222.1520143-2-lis8215@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-07-10hw/mips/loongson3_virt: Relax CPU restrictions for TCGJiaxun Yang
After implemented CPUCFG and CSR, we are now able to boot Linux kernel with Loongson-3A4000 CPU, so there is no point to restrict CPU type to 3A1000 only, instead we just check for presence of INSN_LOONGSON3A. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Message-Id: <20230521214832.20145-3-jiaxun.yang@flygoat.com> [JY: Check for cpu_type_supports_isa(INSN_LOONGSON3A)] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-07-10target/mips: Implement Loongson CSR instructionsJiaxun Yang
Loongson introduced CSR instructions since 3A4000, which looks similar to IOCSR and CPUCFG instructions we seen in LoongArch. Unfortunately we don't have much document about those instructions, bit fields of CPUCFG instructions and IOCSR registers can be found at 3A4000's user manual, while instruction encodings can be found at arch/mips/include/asm/mach-loongson64/loongson_regs.h from Linux Kernel. Our predefined CPUCFG bits are differ from actual 3A4000, since we can't emulate all CPUCFG features present in 3A4000 for now, we just enable bits for what we have in TCG. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Message-Id: <20230521214832.20145-2-jiaxun.yang@flygoat.com> [JY: Fixed typo in ase_lcsr_available(), retrict GEN_FALSE_TRANS] [PMD: Fix meson's mips_softmmu_ss -> mips_system_ss, restrict AddressSpace/MemoryRegion to SysEmu] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-07-10Merge tag 'qga-pull-2023-07-10' of https://github.com/kostyanf14/qemu into ↵Richard Henderson
staging qga-pull-2023-07-10 # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCgAdFiEEwsLBCepDxjwUI+uE711egWG6hOcFAmSsBN8ACgkQ711egWG6 # hOfGzw/9HJl1sQQQWO/Nv3HOtiC7Nnk3d06Wx8nC3d3L4fyDDsyCm1gBQK2YX6x5 # jlDCwgf28DoSDgvznyRvoUrDaQ4QBwcd2Xc5ukQRxZ4K2zEfWjp/NI7AWzUxQ2ID # G1dAWrnY94qm8vkkjAV6ABpDZNMWQlahwcABG8S5rFWaIqv+TSsFD9qRbrcA/LsJ # hKbcGSuWEzQSYcFD4ctGbQP4JgQQOO5Yk/3S7PO0+j/04vaYoers/9ZhRc8WhxGs # WAqxMdmUMcuYU0VkDLRVaGfJ5TrlHqm/iHz9UnTNbWekGjeNiEMyGN3shWCKN2AE # mMXU2zd74dBdMhwIzSlz7MW0XuX3TLrI3DZ9W7lY+8FfafQi8Dd2FPfPdKNDhEp0 # NQ8N/W6LAXPkVWci3uSvw50K+Q0svWee6mZV3qI6DbD1a8dRKvlFvvL7FCvHt8eF # 7YIHanJEzHbday31dhaRBBDn0EehBsFiJVImyfKBrMxGPfhTva+rH4KWKIW2pGfU # 3Sqk3KJ+c0Byh1Rkv6LTeYQSUV4x/fwve/EnvBhau1CyuoFSR0/Eoyqzi3aX3koL # Ord9BUGgmEc3TzDj0LhonEWnlWmNcUm/ck9dZTkYcDWyLLaArJ5pW9iUU9eh9Vx/ # 56r3/Jyz4QM6CjFmWWGEsEFMrM0wMGxl9JQKRcc39Eo2GpgWtuI= # =zeI3 # -----END PGP SIGNATURE----- # gpg: Signature made Mon 10 Jul 2023 02:17:19 PM BST # gpg: using RSA key C2C2C109EA43C63C1423EB84EF5D5E8161BA84E7 # gpg: Good signature from "Kostiantyn Kostiuk (Upstream PR sign) <kkostiuk@redhat.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: C2C2 C109 EA43 C63C 1423 EB84 EF5D 5E81 61BA 84E7 * tag 'qga-pull-2023-07-10' of https://github.com/kostyanf14/qemu: QGA VSS: Add log in functions begin/end QGA VSS: Print error in err_set QGA VSS: Replace 'fprintf(stderr' with qga_debug QGA VSS: Add wrapper to send log to debugger and stderr qga: Add tests for --allow-rpcs option qga: Add new option --allow-rpcs qga: Rename ga_disable_not_allowed -> ga_disable_not_allowed_freeze Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-07-10Merge tag 'pull-riscv-to-apply-20230710-1' of ↵Richard Henderson
https://github.com/alistair23/qemu into staging Third RISC-V PR for 8.1 * Use xl instead of mxl for disassemble * Factor out extension tests to cpu_cfg.h * disas/riscv: Add vendor extension support * disas/riscv: Add support for XVentanaCondOps * disas/riscv: Add support for XThead* instructions * Fix mstatus related problems * Fix veyron-v1 CPU properties * Fix the xlen for data address when MPRV=1 * opensbi: Upgrade from v1.2 to v1.3 * Enable 32-bit Spike OpenSBI boot testing * Support the watchdog timer of HiFive 1 rev b * Only build qemu-system-riscv$$ on rv$$ host * Add RVV registers to log * Restrict ACLINT to TCG * Add syscall riscv_hwprobe * Add support for BF16 extensions * KVM_RISCV_SET_TIMER macro is not configured correctly * Generate devicetree only after machine initialization is complete * virt: Convert fdt_load_addr to uint64_t * KVM: fixes and enhancements * Add support for the Zfa extension # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmSr+ekACgkQr3yVEwxT # gBMMGg//ZCcyH3KXB49c2KUIFO6FKYUxN9uC3giZCtuGyEH8T2yDgZVVXnxwU+Ij # +3Ej6T/ZdWMpePC9qf+xKzHWZk7Qc8Tcg+JgQbga573894yZInRwYl8HsSlEKA+Z # vlqSBPxTlp9rlDwGP/LjGljyIFqL4konk9zi3FL4ZXTF1iHUGrh/953Y3wIreEfl # KX5UznnWcgy2BqQT1vihMbM8qCVK6iryH+QZ6LiAsPMSX1rIzk8ectQryILzoIYh # bMiwCLVMyr4ZrUXjmGTF+7/WcOWwhhyfpdstf2iotKALelZtVHit0wHcty2GYQde # nvN83jJWu04DGXkPBUsqCUQXczGo1QHjJUH3RIRJzfOby/lGt4pSzHAfKA+iNUht # ikM3SdBsXMO+ogjTtTcCMb7/m2vsMoQP60VRts9Mh3YVD0cgr7RqpqRoEMugVYnr # ca8Vijf71mB+y+pq477eV1Q8BoKpr8xa1OlFkNKPC17uMD7HoDMI44QgFOgtYp10 # TMsqqyB75q6PZhSEwm63xbmH0Zpo8kSqT/E3MTtGTyPeuL8TNNNSkCmFaGYmRrbI # XEp7vG2RaDJOvDomS3nUhA5ruc8SaXd0q25q2gLYQfCsehfFqZAwuNB5xf1zS0M0 # ov1/gwaqU93t6nLbo2cCbb0plkIFKwwJ9KKjD06wJ4KPe0TGFzk= # =3XFD # -----END PGP SIGNATURE----- # gpg: Signature made Mon 10 Jul 2023 01:30:33 PM BST # gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013 # gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013 * tag 'pull-riscv-to-apply-20230710-1' of https://github.com/alistair23/qemu: (54 commits) riscv: Add support for the Zfa extension target/riscv/kvm.c: read/write (cbom|cboz)_blocksize in KVM target/riscv/kvm.c: add kvmconfig_get_cfg_addr() helper target/riscv: update multi-letter extension KVM properties target/riscv/cpu.c: create KVM mock properties target/riscv/cpu.c: remove priv_ver check from riscv_isa_string_ext() target/riscv/cpu.c: add satp_mode properties earlier target/riscv/kvm.c: add multi-letter extension KVM properties target/riscv/kvm.c: update KVM MISA bits target/riscv: add KVM specific MISA properties target/riscv/cpu: add misa_ext_info_arr[] target/riscv/kvm.c: init 'misa_ext_mask' with scratch CPU target/riscv: handle mvendorid/marchid/mimpid for KVM CPUs target/riscv: read marchid/mimpid in kvm_riscv_init_machine_ids() target/riscv: use KVM scratch CPUs to init KVM properties target/riscv/cpu.c: restrict 'marchid' value target/riscv/cpu.c: restrict 'mimpid' value target/riscv/cpu.c: restrict 'mvendorid' value hw/riscv/virt.c: skip 'mmu-type' FDT if satp mode not set target/riscv: skip features setup for KVM CPUs ... Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-07-10hw/pci/pci: Remove multifunction parameter from ↵Bernhard Beschow
pci_create_simple_multifunction() There is also pci_create_simple() which creates non-multifunction PCI devices. Accordingly the parameter is always set to true when a multi function PCI device is to be created. The reason for the parameter's existence seems to be that it is used in the internal PCI code as well which is the only location where it gets set to false. This one usage can be replaced by trivial code. Remove this redundant, error-prone parameter. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Message-Id: <20230304114043.121024-5-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10hw/i386/pc_piix: Move i440fx' realize near its qdev_new()Bernhard Beschow
I440FX realization is currently mixed with PIIX3 creation. Furthermore, it is common practice to only set properties between a device's qdev_new() and qdev_realize(). Clean up to resolve both issues. Since I440FX spawns a PCI bus let's also move the pci_bus initialization there. Note that when running `qemu-system-x86_64 -M pc -S` before and after this patch, `info mtree` in the QEMU console doesn't show any differences except that the ordering is different. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230630073720.21297-18-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10hw/pci-host/i440fx: Resolve i440fx_init()Bernhard Beschow
i440fx_init() is a legacy init function. The previous patches worked towards TYPE_I440FX_PCI_HOST_BRIDGE to be instantiated the QOM way. Do this now by transforming the parameters passed to i440fx_init() into property assignments. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Message-Id: <20230630073720.21297-17-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-07-10hw/pci-host/i440fx: Add I440FX_HOST_PROP_PCI_TYPE propertyBernhard Beschow
I440FX needs a different PCI device model if the "igd-passthru" property is enabled. The type name is currently passed as a parameter to i440fx_init(). This parameter will be replaced by a property assignment once i440fx_init() gets resolved. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Message-Id: <20230630073720.21297-16-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10hw/pci-host/i440fx: Add PCI_HOST_{ABOVE, BELOW}_4G_MEM_SIZE propertiesBernhard Beschow
Introduce the properties in anticipation of QOM'ification; Q35 has the same properties. Note that we want to avoid a "ram size" property in the QOM interface since it seems redundant to both properties introduced in this change. Thus the removal of the ram_size parameter. We assume the invariant of both properties to sum up to "ram size" which is already asserted in pc_memory_init(). Under Xen the invariant seems to hold as well, so we now also check it there. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Message-Id: <20230630073720.21297-15-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10hw/pci-host/i440fx: Add PCI_HOST_PROP_IO_MEM propertyBernhard Beschow
Introduce the property in anticipation of QOM'ification; Q35 has the same property. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Message-Id: <20230630073720.21297-14-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10hw/pci-host/i440fx: Make MemoryRegion pointers accessible as propertiesBernhard Beschow
The goal is to eliminate i440fx_init() which is a legacy init function. This neccessitates the memory regions to be properties, like in Q35, which will be assigned in board code. Since i440fx needs different PCI devices in Xen mode, and since i440fx shall be self-contained, the PCI device will be created during realization of the host. Thus the pointers need to be moved to the host structure to be usable as properties. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230630073720.21297-13-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10hw/pci-host/i440fx: Move i440fx_realize() into PCII440FXState sectionBernhard Beschow
i440fx_realize() realizes the PCI device inside the host bridge (PCII440FXState), but is implemented between i440fx_pcihost_realize() and i440fx_init() which deal with the host bridge itself (I440FXState). Since we want to append i440fx_init() to i440fx_pcihost_realize() later let's move i440fx_realize() out of the way. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230630073720.21297-12-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10hw/pci-host/i440fx: Have common names for some local variablesBernhard Beschow
`PCIHostState` is often referred to as `phb`, own device state usually as `s`. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230630073720.21297-11-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10hw/pci-host/i440fx: Replace magic values by existing constantsBernhard Beschow
Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230630073720.21297-10-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10hw/pci-host/i440fx: Add "i440fx" child property in board codeBernhard Beschow
The parent-child relation is usually established near a child's qdev_new(). For i440fx this allows for reusing the machine parameter, thus avoiding qdev_get_machine() which relies on a global variable. Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Bernhard Beschow <shentey@gmail.com> Message-Id: <20230630073720.21297-9-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10hw/i386/pc_piix: Turn some local variables into initializersBernhard Beschow
Eliminates an else branch. Suggested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230630073720.21297-8-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10hw/pci-host/q35: Make some property name macros reusable by i440fxBernhard Beschow
Signed-off-by: Bernhard Beschow <shentey@gmail.com> Message-Id: <20230630073720.21297-7-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10hw/pci-host/q35: Initialize PCI_HOST_BYPASS_IOMMU property from board codeBernhard Beschow
The Q35 PCI host already has a PCI_HOST_BYPASS_IOMMU property. However, the host initializes this property itself by accessing global machine state, thereby assuming it to be a PC machine. Avoid this by having board code set this property. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230630073720.21297-6-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10hw/pci/pci_host: Introduce PCI_HOST_BYPASS_IOMMU macroBernhard Beschow
Introduce a macro to avoid copy and pasting strings which can easily cause typos. Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20230630073720.21297-5-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10hw/pci-host/q35: Initialize PCMachineState::bus in board codeBernhard Beschow
The Q35 PCI host currently sets the PC machine's PCI bus attribute through global state, thereby assuming the machine to be a PC machine. The Q35 machine code already holds on to Q35's pci bus attribute, so can easily set its own property while preserving encapsulation. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230630073720.21297-4-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10hw/pci-host/q35: Fix double, contradicting .endianness assignmentBernhard Beschow
Fixes the following clangd warning (-Winitializer-overrides): q35.c:297:19: Initializer overrides prior initialization of this subobject q35.c:292:19: previous initialization is here Settle on little endian which is consistent with using pci_host_conf_le_ops. Fixes: bafc90bdc594 ("q35: implement TSEG") Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230630073720.21297-3-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10hw/i386/pc_q35: Resolve redundant q35_host variableBernhard Beschow
The variable is redundant to "phb" and is never used by its real type. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230630073720.21297-2-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10vhost-user: Make RESET_DEVICE a per device messageTom Lonergan
A device reset is issued per device, not per VQ. The legacy device reset message, VHOST_USER_RESET_OWNER, is already a per device message. Therefore, this change adds the proper message, VHOST_USER_RESET_DEVICE, to per device messages. Signed-off-by: Tom Lonergan <tom.lonergan@nutanix.com> Message-Id: <20230628163927.108171-3-tom.lonergan@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
2023-07-10vhost-user: Change one_time to per_device requestTom Lonergan
Some devices, like virtio-scsi, consist of one vhost_dev, while others, like virtio-net, contain multiple vhost_devs. The QEMU vhost-user code has a concept of one-time messages which is misleading. One-time messages are sent once per operation on the device, not once for the lifetime of the device. Therefore, as discussed in [1], vhost_user_one_time_request should be renamed to vhost_user_per_device_request and the relevant comments updated to match the real functionality. [1] https://lore.kernel.org/qemu-devel/20230127083027-mutt-send-email-mst@kernel.org/ Signed-off-by: Tom Lonergan <tom.lonergan@nutanix.com> Message-Id: <20230628163927.108171-2-tom.lonergan@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
2023-07-10hw/smbios: Fix core count in type4Zhao Liu
>From SMBIOS 3.0 specification, core count field means: Core Count is the number of cores detected by the BIOS for this processor socket. [1] Before 003f230e37d7 ("machine: Tweak the order of topology members in struct CpuTopology"), MachineState.smp.cores means "the number of cores in one package", and it's correct to use smp.cores for core count. But 003f230e37d7 changes the smp.cores' meaning to "the number of cores in one die" and doesn't change the original smp.cores' use in smbios as well, which makes core count in type4 go wrong. Fix this issue with the correct "cores per socket" caculation. [1] SMBIOS 3.0.0, section 7.5.6, Processor Information - Core Count Fixes: 003f230e37d7 ("machine: Tweak the order of topology members in struct CpuTopology") Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Message-Id: <20230628135437.1145805-5-zhao1.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10hw/smbios: Fix thread count in type4Zhao Liu
>From SMBIOS 3.0 specification, thread count field means: Thread Count is the total number of threads detected by the BIOS for this processor socket. It is a processor-wide count, not a thread-per-core count. [1] So here we should use threads per socket other than threads per core. [1] SMBIOS 3.0.0, section 7.5.8, Processor Information - Thread Count Fixes: c97294ec1b9e ("SMBIOS: Build aggregate smbios tables and entry point") Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Message-Id: <20230628135437.1145805-4-zhao1.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10hw/smbios: Fix smbios_smp_sockets caculationZhao Liu
smp.sockets is the number of sockets which is configured by "-smp" ( otherwise, the default is 1). Trying to recalculate it here with another rules leads to errors, such as: 1. 003f230e37d7 ("machine: Tweak the order of topology members in struct CpuTopology") changes the meaning of smp.cores but doesn't fix original smp.cores uses. With the introduction of cluster, now smp.cores means the number of cores in one cluster. So smp.cores * smp.threads just means the threads in a cluster not in a socket. 2. On the other hand, we shouldn't use smp.cpus here because it indicates the initial number of online CPUs at the boot time, and is not mathematically related to smp.sockets. So stop reinventing the another wheel and use the topo values that has been calculated. Fixes: 003f230e37d7 ("machine: Tweak the order of topology members in struct CpuTopology") Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Message-Id: <20230628135437.1145805-3-zhao1.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10machine: Add helpers to get cores/threads per socketZhao Liu
The number of cores/threads per socket are needed for smbios, and are also useful for other modules. Provide the helpers to wrap the calculation of cores/threads per socket so that we can avoid calculation errors caused by other modules miss topology changes. Suggested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Message-Id: <20230628135437.1145805-2-zhao1.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10tests/qtest: enable tests for virtio-scmiMilan Zamazal
We don't have a virtio-scmi implementation in QEMU and only support a vhost-user backend. This is very similar to virtio-gpio and we add the same set of tests, just passing some vhost-user messages over the control socket. Signed-off-by: Milan Zamazal <mzamazal@redhat.com> Acked-by: Thomas Huth <thuth@redhat.com> Message-Id: <20230628100524.342666-4-mzamazal@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-16 21:19:08 +0000