aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-06-16migration: rename functions to starting migrationsDaniel P. Berrange
Apply the following renames for starting incoming migration: process_incoming_migration -> migration_fd_process_incoming migration_set_incoming_channel -> migration_channel_process_incoming migration_tls_set_incoming_channel -> migration_tls_channel_process_incoming and for starting outgoing migration: migration_set_outgoing_channel -> migration_channel_connect migration_tls_set_outgoing_channel -> migration_tls_channel_connect Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1464776234-9910-3-git-send-email-berrange@redhat.com Message-Id: <1464776234-9910-3-git-send-email-berrange@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-06-16migration: fix typos in qapi-schema from latest migration additionsDaniel P. Berrange
Recent migration QAPI enhancements had a few spelling mistakes and also incorrect version number in a few places. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1464776234-9910-2-git-send-email-berrange@redhat.com Message-Id: <1464776234-9910-2-git-send-email-berrange@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-06-16Postcopy: Check for support when setting the capabilityDr. David Alan Gilbert
Knowing whether the destination host supports migration with postcopy can be tricky. The destination doesn't need the capability set, however if we set it then use the opportunity to do the test and tell the user/management layer early. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Message-id: 1465816605-29488-7-git-send-email-dgilbert@redhat.com Message-Id: <1465816605-29488-7-git-send-email-dgilbert@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-06-16tests: fix libqtest socket timeoutsAndrea Arcangeli
I kept getting timeouts and unix socket accept failures under high load, the patch fixes it. Signed-off-by: Andrea Arcangeli <aarcange@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Message-id: 1465816605-29488-6-git-send-email-dgilbert@redhat.com Message-Id: <1465816605-29488-6-git-send-email-dgilbert@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-06-16test: PostcopyDr. David Alan Gilbert
This is a postcopy test (x86 only) that actually runs the guest and checks the memory contents. The test runs from an x86 boot block with the hex embedded in the test; the source for this is: ........... .code16 .org 0x7c00 .file "fill.s" .text .globl start .type start, @function start: # at 0x7c00 ? cli lgdt gdtdesc mov $1,%eax mov %eax,%cr0 # Protected mode enable data32 ljmp $8,$0x7c20 .org 0x7c20 .code32 # A20 enable - not sure I actually need this inb $0x92,%al or $2,%al outb %al, $0x92 # set up DS for the whole of RAM (needed on KVM) mov $16,%eax mov %eax,%ds mov $65,%ax mov $0x3f8,%dx outb %al,%dx # bl keeps a counter so we limit the output speed mov $0, %bl mainloop: # Start from 1MB mov $(1024*1024),%eax innerloop: incb (%eax) add $4096,%eax cmp $(100*1024*1024),%eax jl innerloop inc %bl jnz mainloop mov $66,%ax mov $0x3f8,%dx outb %al,%dx jmp mainloop # GDT magic from old (GPLv2) Grub startup.S .p2align 2 /* force 4-byte alignment */ gdt: .word 0, 0 .byte 0, 0, 0, 0 /* -- code segment -- * base = 0x00000000, limit = 0xFFFFF (4 KiB Granularity), present * type = 32bit code execute/read, DPL = 0 */ .word 0xFFFF, 0 .byte 0, 0x9A, 0xCF, 0 /* -- data segment -- * base = 0x00000000, limit 0xFFFFF (4 KiB Granularity), present * type = 32 bit data read/write, DPL = 0 */ .word 0xFFFF, 0 .byte 0, 0x92, 0xCF, 0 gdtdesc: .word 0x27 /* limit */ .long gdt /* addr */ /* I'm a bootable disk */ .org 0x7dfe .byte 0x55 .byte 0xAA ........... and that can be assembled by the following magic: as --32 -march=i486 fill.s -o fill.o objcopy -O binary fill.o fill.boot dd if=fill.boot of=bootsect bs=256 count=2 skip=124 xxd -i bootsect Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Message-id: 1465816605-29488-5-git-send-email-dgilbert@redhat.com Message-Id: <1465816605-29488-5-git-send-email-dgilbert@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-06-16Postcopy: Add stats on page requestsDr. David Alan Gilbert
On the source, add a count of page requests received from the destination. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Denis V. Lunev <den@openvz.org> Message-id: 1465816605-29488-4-git-send-email-dgilbert@redhat.com Message-Id: <1465816605-29488-4-git-send-email-dgilbert@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-06-16Migration: Split out ram part of qmp_query_migrateDr. David Alan Gilbert
The RAM section of qmp_query_migrate is reasonably complex and repeated 3 times. Split it out into a helper. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1465816605-29488-3-git-send-email-dgilbert@redhat.com Reviwed-by: Denis V. Lunev <den@openvz.org> Message-Id: <1465816605-29488-3-git-send-email-dgilbert@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-06-16Postcopy: Avoid 0 length discardsDr. David Alan Gilbert
The discard code in migration/ram.c would send request for zero length discards in the case where no discards were needed. It doesn't appear to have had any bad effect. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Denis V. Lunev <den@openvz.org> Message-id: 1465816605-29488-2-git-send-email-dgilbert@redhat.com Message-Id: <1465816605-29488-2-git-send-email-dgilbert@redhat.com> Signed-off-by: Amit Shah <amit.shah@redhat.com>
2016-06-14Merge remote-tracking branch 'remotes/sstabellini/tags/xen-20160614-tag' ↵Peter Maydell
into staging Xen 2016/06/14 # gpg: Signature made Tue 14 Jun 2016 16:01:52 BST # gpg: using RSA key 0x894F8F4870E1AE90 # gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>" # Primary key fingerprint: D04E 33AB A51F 67BA 07D3 0AEA 894F 8F48 70E1 AE90 * remotes/sstabellini/tags/xen-20160614-tag: xen: Clean up includes xen/blkif: avoid double access to any shared ring request fields Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14Merge remote-tracking branch ↵Peter Maydell
'remotes/pmaydell/tags/pull-target-arm-20160614-2' into staging target-arm queue: * add PMU support for virt machine under KVM * fix reset and migration of TTBCR(S) * add virt-2.7 machine type * QOMify various ARM devices * implement xilinx DisplayPort device * don't permit ARMv8-only Neon insns to work on ARMv7 # gpg: Signature made Tue 14 Jun 2016 16:01:45 BST # gpg: using RSA key 0x3C2525ED14360CDE # gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" # gpg: aka "Peter Maydell <pmaydell@gmail.com>" # gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" # Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE * remotes/pmaydell/tags/pull-target-arm-20160614-2: (30 commits) target-arm: Don't permit ARMv8-only Neon insns on ARMv7 arm: xlnx-zynqmp: Add xlnx-dp and xlnx-dpdma introduce xlnx-dp introduce xlnx-dpdma hw/i2c-ddc.c: Implement DDC I2C slave introduce dpcd module introduce aux-bus i2c: Factor our send() and recv() common logic i2c: implement broadcast write i2cbus: remove unused dev field hw/sd: QOM'ify pl181.c hw/dma: QOM'ify pxa2xx_dma.c hw/misc: QOM'ify mst_fpga.c hw/misc: QOM'ify exynos4210_pmu.c hw/misc: QOM'ify arm_l2x0.c hw/gpio: QOM'ify zaurus.c hw/gpio: QOM'ify pl061.c hw/gpio: QOM'ify omap_gpio.c hw/i2c: QOM'ify versatile_i2c.c hw/i2c: QOM'ify omap_i2c.c ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14target-arm: Don't permit ARMv8-only Neon insns on ARMv7Peter Maydell
The Neon instructions VCVTA, VCVTM, VCVTN, VCVTP, VRINTA, VRINTM, VRINTN, VRINTP, VRINTX, and VRINTZ were only introduced with ARMv8, so they need a guard to make them UNDEF if the CPU only supports ARMv7. (We got this right for all the other new-in-v8 insns, but forgot it for these Neon 2-reg-misc ops.) Reported-by: Christophe Lyon <christophe.lyon@linaro.org> Tested-by: Christophe Lyon <christophe.lyon@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1465492511-9333-1-git-send-email-peter.maydell@linaro.org
2016-06-14arm: xlnx-zynqmp: Add xlnx-dp and xlnx-dpdmaKONRAD Frederic
This adds the DP and the DPDMA to the Zynq MP platform. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Tested-By: Hyun Kwon <hyun.kwon@xilinx.com> Message-id: 1465833014-21982-10-git-send-email-fred.konrad@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14introduce xlnx-dpKONRAD Frederic
This is the implementation of the DisplayPort. It has an aux-bus to access dpcd and edid. Graphic plane is connected to the channel 3. Video plane is connected to the channel 0. Audio stream are connected to the channels 4 and 5. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Tested-By: Hyun Kwon <hyun.kwon@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 1465833014-21982-9-git-send-email-fred.konrad@greensocs.com [PMM: fixed format strings] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14introduce xlnx-dpdmaKONRAD Frederic
This is the implementation of the DPDMA. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Tested-By: Hyun Kwon <hyun.kwon@xilinx.com> Message-id: 1465833014-21982-8-git-send-email-fred.konrad@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14hw/i2c-ddc.c: Implement DDC I2C slavePeter Maydell
Implement an I2C slave which implements DDC and returns the EDID data for an attached monitor. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Tested-by: Hyun Kwon <hyun.kwon@xilinx.com> Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Message-id: 1465833014-21982-7-git-send-email-fred.konrad@greensocs.com - Rebased on the current master. - Modified for QOM. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Tested-By: Hyun Kwon <hyun.kwon@xilinx.com> [PMM: actually wire up the vmstate to dc->vmsd] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14introduce dpcd moduleKONRAD Frederic
This introduces dpcd module. It wires on a aux-bus and can be accessed by the driver to get lane-speed, etc. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Tested-By: Hyun Kwon <hyun.kwon@xilinx.com> Message-id: 1465833014-21982-6-git-send-email-fred.konrad@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14introduce aux-busKONRAD Frederic
This introduces a new bus: aux-bus. It contains an address space for aux slaves devices and a bridge to an I2C bus for I2C through AUX transactions. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Tested-By: Hyun Kwon <hyun.kwon@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Message-id: 1465833014-21982-5-git-send-email-fred.konrad@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14i2c: Factor our send() and recv() common logicPeter Crosthwaite
Most of the control flow logic between send and recv (error checking etc) is the same. Factor this out into a common send_recv() API. This is then usable by clients, where the control logic for send and receive differs only by a boolean. E.g. if (send) i2c_send(...): else i2c_recv(...); becomes: i2c_send_recv(... , send); Signed-off-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Message-id: 1465833014-21982-4-git-send-email-fred.konrad@greensocs.com Changes from FK: * Rebased on master. * Rebased on my i2c broadcast patch. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14i2c: implement broadcast writeKONRAD Frederic
This does a write to every slaves when the I2C bus get a write to address 0. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Tested-By: Hyun Kwon <hyun.kwon@xilinx.com> Message-id: 1465833014-21982-3-git-send-email-fred.konrad@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14i2cbus: remove unused dev fieldKONRAD Frederic
The dev field in i2cbus is not used. So just drop it. Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com> Reviewed-by: Alistair Francis <alistair.francis@xilinx.com> Reviewed-by: Peter Crosthwaite <crosthwaite.peter@gmail.com> Tested-By: Hyun Kwon <hyun.kwon@xilinx.com> Message-id: 1465833014-21982-2-git-send-email-fred.konrad@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14hw/sd: QOM'ify pl181.cxiaoqiang zhao
split the old SysBus init function into an instance_init and a Device realize function Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-id: 1465815255-21776-13-git-send-email-zxq_yx_007@163.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14hw/dma: QOM'ify pxa2xx_dma.cxiaoqiang zhao
split the old SysBus init function into an instance_init and a Device realize function Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-id: 1465815255-21776-12-git-send-email-zxq_yx_007@163.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14hw/misc: QOM'ify mst_fpga.cxiaoqiang zhao
Drop the old SysBus init function and use instance_init Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-id: 1465815255-21776-11-git-send-email-zxq_yx_007@163.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14hw/misc: QOM'ify exynos4210_pmu.cxiaoqiang zhao
Drop the old SysBus init function and use instance_init Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-id: 1465815255-21776-10-git-send-email-zxq_yx_007@163.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14hw/misc: QOM'ify arm_l2x0.cxiaoqiang zhao
Drop the old SysBus init function and use instance_init Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-id: 1465815255-21776-9-git-send-email-zxq_yx_007@163.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14hw/gpio: QOM'ify zaurus.cxiaoqiang zhao
Drop the old SysBus init function and use instance_init Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-id: 1465815255-21776-8-git-send-email-zxq_yx_007@163.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14hw/gpio: QOM'ify pl061.cxiaoqiang zhao
* Merge the pl061_initfn into pl061_init * Drop the old SysBus init function and use instance_init Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-id: 1465815255-21776-7-git-send-email-zxq_yx_007@163.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14hw/gpio: QOM'ify omap_gpio.cxiaoqiang zhao
* Split the old SysBus init into an instance_init and DeviceClass::realize function * Drop the SysBus init function Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-id: 1465815255-21776-6-git-send-email-zxq_yx_007@163.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14hw/i2c: QOM'ify versatile_i2c.cxiaoqiang zhao
Drop the old SysBus init function and use instance_init Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-id: 1465815255-21776-5-git-send-email-zxq_yx_007@163.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14hw/i2c: QOM'ify omap_i2c.cxiaoqiang zhao
* Split the omap_i2c_init into an instance_init and realize function * Drop the old SysBus init function and use instance_init Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-id: 1465815255-21776-4-git-send-email-zxq_yx_007@163.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14hw/i2c: QOM'ify exynos4210_i2c.cxiaoqiang zhao
* Rename the exynos4210_i2c_realize to exynos4210_i2c_init * Drop the old SysBus init function and use instance_init Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-id: 1465815255-21776-3-git-send-email-zxq_yx_007@163.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14hw/i2c: QOM'ify bitbang_i2c.cxiaoqiang zhao
Drop the old SysBus init function and use instance_init Signed-off-by: xiaoqiang zhao <zxq_yx_007@163.com> Message-id: 1465815255-21776-2-git-send-email-zxq_yx_007@163.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14hw/arm/virt: create the 2.7 machine typeAndrew Jones
Signed-off-by: Andrew Jones <drjones@redhat.com> Message-id: 1465746713-30414-5-git-send-email-drjones@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14hw/arm/virt: introduce DEFINE_VIRT_MACHINE_AS_LATESTAndrew Jones
Create two variants of DEFINE_VIRT_MACHINE. One, just called DEFINE_VIRT_MACHINE, that does not set properties that only the latest machine type should have, and another that does. This will hopefully reduce potential for errors when adding new versions. Signed-off-by: Andrew Jones <drjones@redhat.com> Message-id: 1465746713-30414-4-git-send-email-drjones@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14hw/arm/virt: introduce DEFINE_VIRT_MACHINEAndrew Jones
Use DEFINE_VIRT_MACHINE to generate versioned machine type info. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1465746713-30414-3-git-send-email-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14hw/arm/virt: separate versioned type-init codeAndrew Jones
Rename machvirt_info (which is specifically for 2.6 TypeInfo) to machvirt_2_6_info, and separate the type registration of the abstract machine type from the versioned type. Signed-off-by: Andrew Jones <drjones@redhat.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 1465746713-30414-2-git-send-email-drjones@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14target-arm: Fix reset and migration of TTBCR(S)Peter Maydell
Commit 6459b94c26dd666badb3 broke reset and migration of the AArch32 TTBCR(S) register if the guest used non-LPAE page tables. This is because the AArch32 TTBCR register definition is marked as ARM_CP_ALIAS, meaning that the AArch64 variant has to handle migration and reset. Although AArch64 TCR_EL3 doesn't need to care about the mask and base_mask fields, AArch32 may do so, and so we must use the special TTBCR reset and raw write functions to ensure they are set correctly. This doesn't affect TCR_EL2, because the AArch32 equivalent of that is HTCR, which never uses the non-LPAE page table variant. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reported-by: Pranith Kumar <bobby.prani+qemu@gmail.com> Reviewed-by: Sergey Fedorov <sergey.fedorov@linaro.org> Message-id: 1465488181-31977-1-git-send-email-peter.maydell@linaro.org
2016-06-14hw/arm/virt-acpi-build: Add PMU IRQ number in ACPI tableShannon Zhao
Add PMU IRQ number in ACPI table, then we can use PMU in guest through ACPI. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 1465267577-1808-4-git-send-email-zhaoshenglong@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14hw/arm/virt: Add PMU node for virt machineShannon Zhao
Add a virtual PMU device for virt machine while use PPI 7 for PMU overflow interrupt number. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 1465267577-1808-3-git-send-email-zhaoshenglong@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14target-arm: kvm64: set guest PMUv3 feature bit if supportedShannon Zhao
Check if kvm supports guest PMUv3. If so, set the corresponding feature bit for vcpu. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Andrew Jones <drjones@redhat.com> Message-id: 1465267577-1808-2-git-send-email-zhaoshenglong@huawei.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14xen: Clean up includesPeter Maydell
Clean up includes so that osdep.h is included first and headers which it implies are not included manually. This commit was created with scripts/clean-includes. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Signed-off-by: Stefano Stabellini <sstabellini@kernel.org>
2016-06-14qdev_try_create(): Assert that devices we put onto the system bus are ↵Peter Maydell
SysBusDevices If qdev_try_create() is passed NULL for the bus, it will automatically put the newly created device onto the default system bus. However if the device is not actually a SysBusDevice then this will result in later crashes (for instance when running the monitor "info qtree" command) because code reasonably assumes that all devices on the system bus are system bus devices. Generally the mistake is that the calling code should create the object with object_new(TYPE_FOO) rather than qdev_create(NULL, TYPE_FOO); see commit 6749695eaaf346c1 for an example of fixing this bug. Assert in qdev_try_create() if the device isn't suitable to put on the system bus, so that this mistake results in failure earlier and more reliably. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2016-06-14Merge remote-tracking branch 'remotes/cohuck/tags/s390x-20160614' into stagingPeter Maydell
More s390x patches, this time mostly dealing with channel I/O: Bugfixes and cleanups, and dequeue pending interrupts after machine checks. # gpg: Signature made Tue 14 Jun 2016 13:09:43 BST # gpg: using RSA key 0xDECF6B93C6F02FAF # gpg: Good signature from "Cornelia Huck <huckc@linux.vnet.ibm.com>" # gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" # Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF * remotes/cohuck/tags/s390x-20160614: s390x/kvm: Fixup interrupt type for non-adapter I/O interrupts s390x: Limit s390-ccw machines to 248 CPUs virtio-ccw: Provide traces for indicator changes s390x/css: introduce property type for device ids s390x/css: clear IO irqs when generating IPI CRW s390x/kvm: add interface for clearing IO irqs linux-headers: update Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-06-14s390x/kvm: Fixup interrupt type for non-adapter I/O interruptsChristian Borntraeger
The current algorithm for I/O interrupts would result in a wrong interrupt type for subchannel numbers fffe and ffff. In addition a non adapter interrupt might look like an adapter interrupt for any subchannel number that has the 0x0400 bit set. No kernel has ever used the type outside logging - and the logging was wrong all the time. For everything else the kernel used the interrupt parameters. Let's use the KVM_S390_INT_IO macro as for adapter interrupts. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Acked-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-06-14s390x: Limit s390-ccw machines to 248 CPUsChristian Borntraeger
The sclp scp read info call fills in a buffer with information about the system. With more than 248 CPUs we overflow the 4k buffer of the SCCB, leading to random data corruption. Basically ALL guest operating systems call scp read info, so let's limit the machines to 248 CPUs to make it obvious that >=249 does not work. As KVM also limits itself to 248 and TCG on s390 does not support SMP, this should cause no regression for any user as no VMs with more than 248 VCPUs were ever possible. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Reviewed-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Boris Fiuczynski <fiuczy@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-06-14virtio-ccw: Provide traces for indicator changesChristian Borntraeger
This allows to trace changes in the summary and queue indicators for the non-irqfd case. For irqfd, kernel traces are needed instead. Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-06-14s390x/css: introduce property type for device idsCornelia Huck
Let's introduce a CssDevId to handle device ids of the xx.x.xxxx type used for channel devices. This has some benefits: - We can use them in virtio-ccw and split the validity checks for a channel device id in general from the constraint checking within the virtio-ccw scope. - We can reuse the device id type for future non-virtio channel devices. While we're at it, improve the validity checks and disallow e.g. trailing characters. Suggested-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Acked-by: David Hildenbrand <dahi@linux.vnet.ibm.com> Reviewed-by: Dong Jia Shi <bjsdjshi@linux.vnet.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-06-14s390x/css: clear IO irqs when generating IPI CRWHalil Pasic
According to the Principles of Operation (more precisely the subsection 'Channel-Report Word'), a subchannel put into the installed parameters initialized state is in the same state as after an I/O system reset (just parameters possibly changed). This implies that any I/O interrupts for that subchannel are no longer pending (as I/O system resets clear I/O interrupts). Therefore, we need an interface to clear pending I/O interrupts. Make css_generate_sch_crws clear the pending IO interrupts for the subchannel. Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-06-14s390x/kvm: add interface for clearing IO irqsHalil Pasic
According to the platform specification, under certain conditions, pending IO interruptions have to be cleared. Let's add an interface for that. Signed-off-by: Halil Pasic <pasic@linux.vnet.ibm.com> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
2016-06-14linux-headers: updateCornelia Huck
Update to 4.7-rc2. Signed-off-by: Cornelia Huck <cornelia.huck@de.ibm.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-25 04:15:13 +0000