aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-01-07hw/arm/allwinner-a10: Add the 'A' SRAM and the SRAM controllerPhilippe Mathieu-Daudé
From the "A10 User Manual V1.20" p.29: "3.2. Memory Mapping" and: 7. System Control 7.1. Overview A10 embeds a high-speed SRAM which has been split into five segments. See detailed memory mapping in following table: Area Address Size (Bytes) A1 0x00000000-0x00003FFF 16K A2 0x00004000-0x00007FFF 16K A3 0x00008000-0x0000B3FF 13K A4 0x0000B400-0x0000BFFF 3K Since for emulation purpose we don't need the segmentations, we simply define the 'A' area as a single 48KB SRAM. We don't implement the following others areas: - 'B': 'Secure RAM' (64K), - 'C': Debug/ISP SRAM - 'D': USB SRAM (qemu) info mtree address-space: memory 0000000000000000-ffffffffffffffff (prio 0, i/o): system 0000000000000000-000000000000bfff (prio 0, ram): sram A 0000000001c00000-0000000001c00fff (prio -1000, i/o): a10-sram-ctrl 0000000001c0b000-0000000001c0bfff (prio 0, i/o): aw_emac 0000000001c18000-0000000001c18fff (prio 0, i/o): ahci 0000000001c18080-0000000001c180ff (prio 0, i/o): allwinner-ahci 0000000001c20400-0000000001c207ff (prio 0, i/o): allwinner-a10-pic 0000000001c20c00-0000000001c20fff (prio 0, i/o): allwinner-A10-timer 0000000001c28000-0000000001c2801f (prio 0, i/o): serial 0000000040000000-0000000047ffffff (prio 0, ram): cubieboard.ram Reported-by: Charlie Smurthwaite <charlie@atech.media> Tested-by: Charlie Smurthwaite <charlie@atech.media> Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20190104142921.878-1-f4bug@amsat.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-07cpus.c: Fix race condition in cpu_stop_current()Peter Maydell
We use cpu_stop_current() to ensure the current CPU has stopped from places like qemu_system_reset_request(). Unfortunately its current implementation has a race. It calls qemu_cpu_stop(), which sets cpu->stopped to true even though the CPU hasn't actually stopped yet. The main thread will look at the flags set by qemu_system_reset_request() and call pause_all_vcpus(). pause_all_vcpus() waits for every cpu to have cpu->stopped true, so it can continue (and we will start the system reset operation) before the vcpu thread has got back to its top level loop. Instead, just set cpu->stop and call cpu_exit(). This will cause the vcpu to exit back to the top level loop, and there (as part of the wait_io_event code) it will call qemu_cpu_stop(). This fixes bugs where the reset request appeared to be ignored or the CPU misbehaved because the reset operation started to change vcpu state while the vcpu thread was still using it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Emilio G. Cota <cota@braap.org> Tested-by: Jaap Crezee <jaap@jcz.nl> Message-id: 20181207155911.12710-1-peter.maydell@linaro.org
2019-01-07MAINTAINERS: Add ARM-related files for hw/[misc|input|timer]/Thomas Huth
Some of the files in hw/input/, hw/misc/ and hw/timer/ are only used by one of the ARM machines, so we can assign these files to the corresponding boards. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 1546433583-18397-1-git-send-email-thuth@redhat.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-07hw/arm: versal: Plug memory leaksEdgar E. Iglesias
Plug a couple of "board creation time" memory leaks. Fixes: 6f16da53ffe4567 ("hw/arm: versal: Add a virtual Xilinx Versal board") Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20190104104749.5314-2-edgar.iglesias@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-07Revert "armv7m: Guard against no -kernel argument"Stefan Hajnoczi
This reverts commit 01fd41ab3fb69971c24a69ed49cde96086d81278. The generic loader device (-device loader,file=kernel.bin) can be used to load a kernel instead of the -kernel option. Some boards have flash memory (pflash) that is set via the -pflash or -drive options. Allow starting QEMU without the -kernel option to accommodate these scenarios. Suggested-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20190103144124.18917-1-stefanha@redhat.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-07arm/xlnx-zynqmp: put APUs and RPUs in separate CPU clustersLuc Michel
Create two separate CPU clusters for APUs and RPUs. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20181207090135.7651-17-luc.michel@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-07gdbstub: add multiprocess extension supportLuc Michel
Add multiprocess extension support by enabling multiprocess mode when the peer requests it, and by replying that we actually support it in the qSupported reply packet. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20181207090135.7651-16-luc.michel@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-07gdbstub: gdb_set_stop_cpu: ignore request when process is not attachedLuc Michel
When gdb_set_stop_cpu() is called with a CPU associated to a process currently not attached by the GDB client, return without modifying the stop CPU. Otherwise, GDB gets confused if it receives packets with a thread-id it does not know about. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20181207090135.7651-15-luc.michel@greensocs.com [PMM: fix checkpatch comment style nit] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-07gdbstub: processes initialization on new peer connectionLuc Michel
When a new connection is established, we set the first process to be attached, and the others detached. The first CPU of the first process is selected as the current CPU. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20181207090135.7651-14-luc.michel@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-07gdbstub: add support for vAttach packetsLuc Michel
Add support for the vAttach packets. In multiprocess mode, GDB sends them to attach to additional processes. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20181207090135.7651-13-luc.michel@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-07gdbstub: add support for extended mode packetLuc Michel
Add support for the '!' extended mode packet. This is required for the multiprocess extension. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20181207090135.7651-12-luc.michel@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-07gdbstub: add multiprocess support to 'D' packetsLuc Michel
'D' packets are used by GDB to detach from a process. In multiprocess mode, the PID to detach from is sent in the request. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20181207090135.7651-11-luc.michel@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-07gdbstub: add multiprocess support to gdb_vm_state_change()Luc Michel
Add support for multiprocess extension in gdb_vm_state_change() function. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20181207090135.7651-10-luc.michel@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-07gdbstub: add multiprocess support to Xfer:features:read:Luc Michel
Change the Xfer:features:read: packet handling to support the multiprocess extension. This packet is used to request the XML description of the CPU. In multiprocess mode, different descriptions can be sent for different processes. This function now takes the process to send the description for as a parameter, and use a buffer in the process structure to store the generated description. It takes the first CPU of the process to generate the description. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20181207090135.7651-9-luc.michel@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-07gdbstub: add multiprocess support to (f|s)ThreadInfo and ThreadExtraInfoLuc Michel
Change the thread info related packets handling to support multiprocess extension. Add the CPUs class name in the extra info to help differentiate them in multiprocess mode. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20181207090135.7651-8-luc.michel@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-07gdbstub: add multiprocess support to 'sC' packetsLuc Michel
Change the sC packet handling to support the multiprocess extension. Instead of returning the first thread, we return the first thread of the current process. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20181207090135.7651-7-luc.michel@greensocs.com [PMM: corrected checkpatch comment style nit] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-07gdbstub: add multiprocess support to vCont packetsLuc Michel
Add the gdb_first_attached_cpu() and gdb_next_attached_cpu() to iterate over all the CPUs in currently attached processes. Add the gdb_first_cpu_in_process() and gdb_next_cpu_in_process() to iterate over CPUs of a given process. Use them to add multiprocess extension support to vCont packets. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20181207090135.7651-6-luc.michel@greensocs.com [PMM: corrected checkpatch comment style nit] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-07gdbstub: add multiprocess support to 'H' and 'T' packetsLuc Michel
Add a couple of helper functions to cope with GDB threads and processes. The gdb_get_process() function looks for a process given a pid. The gdb_get_cpu() function returns the CPU corresponding to the (pid, tid) pair given as parameters. The read_thread_id() function parses the thread-id sent by the peer. This function supports the multiprocess extension thread-id syntax. The return value specifies if the parsing failed, or if a special case was encountered (all processes or all threads). Use them in 'H' and 'T' packets handling to support the multiprocess extension. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20181207090135.7651-5-luc.michel@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-07gdbstub: add multiprocess support to '?' packetsLuc Michel
The gdb_get_cpu_pid() function does the PID lookup for the given CPU. It checks if the CPU is a direct child of a CPU cluster. If it is, the returned PID is the cluster ID plus one (cluster IDs start at 0, GDB PIDs at 1). When the CPU is not a child of such a container, the PID of the default process is returned. The gdb_fmt_thread_id() function generates the string to be used to identify a given thread, in a response packet for the peer. This function supports generating thread IDs when multiprocess mode is enabled (in the form `p<pid>.<tid>'). Use them in the reply to a '?' request. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20181207090135.7651-4-luc.michel@greensocs.com [PMM: fixed checkpatch blockquote style nit] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-07gdbstub: introduce GDB processesLuc Michel
Add a structure GDBProcess that represents processes from the GDB semantic point of view. CPUs can be split into different processes, by grouping them under different cpu-cluster objects. Each occurrence of a cpu-cluster object implies the existence of the corresponding process in the GDB stub. The GDB process ID is derived from the corresponding cluster ID as follows: GDB PID = cluster ID + 1 This is because PIDs -1 and 0 are reserved in GDB and cannot be used by processes. A default process is created to handle CPUs that are not in a cluster. This process gets the PID of the last process PID + 1. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20181207090135.7651-3-luc.michel@greensocs.com [PMM: fixed checkpatch nit about block comment style] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-07hw/cpu: introduce CPU clustersLuc Michel
This commit adds the cpu-cluster type. It aims at gathering CPUs from the same cluster in a machine. For now it only has a `cluster-id` property. Documentation in cluster.h written with the help of Peter Maydell. Signed-off-by: Luc Michel <luc.michel@greensocs.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Tested-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 20181207090135.7651-2-luc.michel@greensocs.com Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-07target/arm: SVE brk[ab] merging does not have s bitRichard Henderson
While brk[ab] zeroing has a flags setting option, the merging variant does not. Retain the same argument structure, to share expansion but force the flag zero and do not decode bit 22. Reported-by: Laurent Desnogues <laurent.desnogues@gmail.com> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20181226215003.31438-1-richard.henderson@linaro.org Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-07target/arm: Convert ARM_TBFLAG_* to FIELDsRichard Henderson
Use "register" TBFLAG_ANY to indicate shared state between A32 and A64, and "registers" TBFLAG_A32 & TBFLAG_A64 for fields that are specific to the given cpu state. Move ARM_TBFLAG_BE_DATA to shared state, instead of its current placement within "Bit usage when in AArch32 state". Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-id: 20181218164348.7127-1-richard.henderson@linaro.org [PMM: removed the renaming of BE_DATA flag to BE] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-07Merge remote-tracking branch 'remotes/ericb/tags/pull-nbd-2019-01-05' into ↵Peter Maydell
staging nbd patches for 2019-01-05 Error and trace improvements in NBD code, such as less noise for common disconnect scenarios. - Vladimir Sementsov-Ogievskiy: 0/3 nbd-client: drop extra error noise - Eric Blake: portions of 0/22 nbd: add qemu-nbd --list # gpg: Signature made Sat 05 Jan 2019 13:58:54 GMT # gpg: using RSA key A7A16B4A2527436A # gpg: Good signature from "Eric Blake <eblake@redhat.com>" # gpg: aka "Eric Blake (Free Software Programmer) <ebb9@byu.net>" # gpg: aka "[jpeg image of size 6874]" # Primary key fingerprint: 71C2 CC22 B1C4 6029 27D2 F3AA A7A1 6B4A 2527 436A * remotes/ericb/tags/pull-nbd-2019-01-05: nbd/client: Drop pointless buf variable qemu-nbd: Fail earlier for -c/-d on non-linux nbd/client: More consistent error messages nbd: Document timeline of various features qemu-nbd: Use program name in error messages block/nbd-client: use traces instead of noisy error_report_err nbd/client: Trace all server option error messages nbd: publish _lookup functions Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-05nbd/client: Drop pointless buf variableEric Blake
There's no need to read into a temporary buffer (oversized since commit 7d3123e1) followed by a byteswap into a uint64_t to check for a magic number via memcmp(), when the code immediately below demonstrates reading into the uint64_t then byteswapping in place and checking for a magic number via integer math. What's more, having a different error message when the server's first reply byte is 0 is unusual - it's no different from any other wrong magic number, and we already detected short reads. That whole strlen() issue has been present and useless since commit 1d45f8b5 in 2010; perhaps it was leftover debugging (since the correct magic number happens to be ASCII)? Make the error messages more consistent and detailed while touching things. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Richard W.M. Jones <rjones@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20181215135324.152629-9-eblake@redhat.com>
2019-01-05qemu-nbd: Fail earlier for -c/-d on non-linuxEric Blake
Connecting to a /dev/nbdN device is a Linux-specific action. We were already masking -c and -d from 'qemu-nbd --help' on non-linux. However, while -d fails with a sensible error message, it took hunting through a couple of files to prove that. What's more, the code for -c doesn't fail until after it has created a pthread and tried to open a device - possibly even printing an error message with %m on a non-Linux platform in spite of the comment that %m is glibc-specific. Make the failure happen sooner, then get rid of stubs that are no longer needed because of the early exits. While at it: tweak the blank newlines in --help output to be consistent, whether or not built on Linux. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20181215135324.152629-7-eblake@redhat.com> Reviewed-by: Richard W.M. Jones <rjones@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2019-01-05nbd/client: More consistent error messagesEric Blake
Consolidate on using decimal (not hex), on outputting the option reply name (not just value), and a consistent comma between clauses, when the client reports protocol discrepancies from the server. While it won't affect normal operation, it makes debugging additions easier. Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Richard W.M. Jones <rjones@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20181215135324.152629-6-eblake@redhat.com>
2019-01-04nbd: Document timeline of various featuresEric Blake
It can be useful to figure out which NBD protocol features are exposed by a server, as well as what features a client will take advantage of if available, for a given qemu release. It's not always precise to base features on version numbers (thanks to downstream backports), but any documentation is better than making users search through git logs themselves. This patch originally stemmed from a request to document that pristine 3.0 has a known bug where NBD_OPT_LIST_META_CONTEXT with 0 queries forgot to advertise an available "qemu:dirty-bitmap" context, but documenting bugs like this (or the fact that 3.0 also botched NBD_CMD_CACHE) gets to be too much details, especially since buggy releases will be less likely connection targets over time. Instead, I chose to just remind users to check stable release branches. Suggested-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20181215135324.152629-3-eblake@redhat.com> Reviewed-by: Richard W.M. Jones <rjones@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2019-01-04qemu-nbd: Use program name in error messagesEric Blake
This changes output from: $ qemu-nbd nosuch Failed to blk_new_open 'nosuch': Could not open 'nosuch': No such file or directory to something more consistent with qemu-img and qemu: $ qemu-nbd nosuch qemu-nbd: Failed to blk_new_open 'nosuch': Could not open 'nosuch': No such file or directory Update the lone affected test to match. (Hmm - is it sad that we don't do much testing of expected failures?) Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Richard W.M. Jones <rjones@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20181215135324.152629-2-eblake@redhat.com>
2019-01-04block/nbd-client: use traces instead of noisy error_report_errVladimir Sementsov-Ogievskiy
Reduce extra noise of nbd-client, change 083 correspondingly. In various commits (be41c100 in 2.10, f140e300 in 2.11, 78a33ab in 2.12), we added spots where qemu as an NBD client would report problems communicating with the server to stderr, because there was no where else to send the error to. However, this is racy, particularly since the most common source of these errors is when either the client or the server abruptly hangs up, leaving one coroutine to report the error only if it wins (or loses) the race in attempting the read from the server before another thread completes its cleanup of a protocol error that caused the disconnect in the first place. The race is also apparent in the fact that differences in the flush behavior of the server can alter the frequency of encountering the race in the client (see commit 6d39db96). Rather than polluting stderr, it's better to just trace these situations, for use by developers debugging a flaky connection, particularly since the real error that either triggers the abrupt disconnection in the first place, or that results from the EIO when a request can't receive a reply, DOES make it back to the user in the normal Error propagation channels. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20181102151152.288399-4-vsementsov@virtuozzo.com> [eblake: drop depedence on error hint, enhance commit message] Signed-off-by: Eric Blake <eblake@redhat.com>
2019-01-04nbd/client: Trace all server option error messagesEric Blake
Not all servers send free-form text alongside option error replies, but for servers that do (such as qemu), we pass the server's message as a hint alongside our own error reporting. However, it would also be useful to trace such server messages, since we can't guarantee how the hint may be consumed. Signed-off-by: Eric Blake <eblake@redhat.com> Message-Id: <20181218225714.284495-3-eblake@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
2019-01-04nbd: publish _lookup functionsVladimir Sementsov-Ogievskiy
These functions are used for formatting pretty trace points. We are going to add some in block/nbd-client, so, let's publish all these functions at once. Note, that nbd_reply_type_lookup is already published, and constants, "named" by these functions live in include/block/nbd.h too. Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Message-Id: <20181102151152.288399-3-vsementsov@virtuozzo.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com>
2019-01-04Merge remote-tracking branch ↵Peter Maydell
'remotes/philmd/tags/fw_cfg-20190104-pull-request' into staging fw_cfg patches for 2019-01-04 Two fixes from Li Qiang: - Improve error message when can't load splash file - Fix boot bootsplash and reboot-timeout error checking # gpg: Signature made Fri 04 Jan 2019 16:22:24 GMT # gpg: using RSA key E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" # Primary key fingerprint: FAAB E75E 1291 7221 DCFD 6BB2 E3E3 2C2C DEAD C0DE * remotes/philmd/tags/fw_cfg-20190104-pull-request: fw_cfg: Make qemu_extra_params_fw locally fw_cfg: Fix -boot reboot-timeout error checking fw_cfg: Fix -boot bootsplash error checking fw_cfg: Improve error message when can't load splash file Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-04fw_cfg: Make qemu_extra_params_fw locallyLi Qiang
qemu_extra_params_fw[] has external linkage, but is used only in fw_cfg_bootsplash(), it makes sense to make it locally. Signed-off-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <1542777026-2788-4-git-send-email-liq3ea@gmail.com> [PMD: Removed qemu_extra_params_fw declaration in vl.c] Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-01-04fw_cfg: Fix -boot reboot-timeout error checkingLi Qiang
fw_cfg_reboot() gets option parameter "reboot-timeout" with qemu_opt_get(), then converts it to an integer by hand. It neglects to check that conversion for errors, and fails to reject negative values. Positive values above the limit get reported and replaced by the limit. This patch checks for conversion errors properly, and reject all values outside 0...0xffff. Signed-off-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <1542777026-2788-3-git-send-email-liq3ea@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-01-04fw_cfg: Fix -boot bootsplash error checkingLi Qiang
fw_cfg_bootsplash() gets option parameter "splash-time" with qemu_opt_get(), then converts it to an integer by hand. It neglects to check that conversion for errors. This is needlessly complicated and error-prone. But as "splash-time not specified" is not the same as "splash-time=T" for any T, we need use qemu_opt_get() to check if splash time exists. This patch also make the qemu exit when finding or loading splash file failed. Signed-off-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <1542777026-2788-2-git-send-email-liq3ea@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-01-04fw_cfg: Improve error message when can't load splash fileLi Qiang
read_splashfile() reports "failed to read splash file" without further details. Get the details from g_file_get_contents(), and include them in the error message. Also remove unnecessary 'res' variable. Signed-off-by: Li Qiang <liq3ea@gmail.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <1541052148-28752-1-git-send-email-liq3ea@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
2019-01-04Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into ↵Peter Maydell
staging Pull request Bug fixes for the .dmg image file format. # gpg: Signature made Fri 04 Jan 2019 11:21:18 GMT # gpg: using RSA key 9CA4ABB381AB73C8 # gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>" # gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>" # Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8 * remotes/stefanha/tags/block-pull-request: dmg: don't skip zero chunk dmg: use enumeration type instead of hard coding number dmg: fix binary search dmg: Fixing wrong dmg block type value for block terminator. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-04dmg: don't skip zero chunkyuchenlin
The dmg file has many tables which describe: "start from sector XXX to sector XXX, the compression method is XXX and where the compressed data resides on". Each sector in the expanded file should be covered by a table. The table will describe the offset of compressed data (or raw depends on the type) in the dmg. For example: [-----------The expanded file------------] [---bzip table ---]/* zeros */[---zlib---] ^ | if we want to read this sector. we will find bzip table which contains this sector, and get the compressed data offset, read it from dmg, uncompress it, finally write to expanded file. If we skip zero chunk (table), some sector cannot find the table which will cause search_chunk() return s->n_chunks, dmg_read_chunk() return -1 and finally causing dmg_co_preadv() return EIO. See: [-----------The expanded file------------] [---bzip table ---]/* zeros */[---zlib---] ^ | if we want to read this sector. Oops, we cannot find the table contains it... In the original implementation, we don't have zero table. When we try to read sector inside the zero chunk. We will get EIO, and skip reading. After this patch, we treat zero chunk the same as ignore chunk, it will directly write zero and avoid some sector may not find the table. After this patch: [-----------The expanded file------------] [---bzip table ---][--zeros--][---zlib---] Signed-off-by: yuchenlin <npes87184@gmail.com> Reviewed-by: Julio Faracco <jcfaracco@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20190103114700.9686-4-npes87184@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-01-04dmg: use enumeration type instead of hard coding numberyuchenlin
Signed-off-by: yuchenlin <npes87184@gmail.com> Reviewed-by: Julio Faracco <jcfaracco@gmail.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-id: 20190103114700.9686-3-npes87184@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-01-04dmg: fix binary searchyuchenlin
There is a possible hang in original binary search implementation. That is if chunk1 = 4, chunk2 = 5, chunk3 = 4, and we go else case. The chunk1 will be still 4, and so on. Signed-off-by: yuchenlin <npes87184@gmail.com> Message-id: 20190103114700.9686-2-npes87184@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-01-04dmg: Fixing wrong dmg block type value for block terminator.Julio Faracco
This is a trivial patch to fix a wrong value for block terminator. The old value was 0x7fffffff which is wrong. It was not affecting the code because QEMU dmg block is not handling block terminator right now. Neverthless, it should be fixed. Signed-off-by: Julio Faracco <jcfaracco@gmail.com> Reviewed-by: yuchenlin <yuchenlin@synology.com> Message-id: 20181228145055.18039-1-jcfaracco@gmail.com Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2019-01-04Merge remote-tracking branch ↵Peter Maydell
'remotes/amarkovic/tags/mips-queue-december-2018-v3' into staging MIPS queue for December 2018 - v3 # gpg: Signature made Thu 03 Jan 2019 16:53:47 GMT # gpg: using RSA key D4972A8967F75A65 # gpg: Good signature from "Aleksandar Markovic <amarkovic@wavecomp.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 8526 FBF1 5DA3 811F 4A01 DD75 D497 2A89 67F7 5A65 * remotes/amarkovic/tags/mips-queue-december-2018-v3: (44 commits) tests/tcg: mips: Test R5900 three-operand MADDU1 tests/tcg: mips: Test R5900 three-operand MADDU tests/tcg: mips: Test R5900 three-operand MADD1 tests/tcg: mips: Test R5900 three-operand MADD disas: nanoMIPS: Add a note on documentation disas: nanoMIPS: Reorder declarations and definitions of gpr decoders disas: nanoMIPS: Comment the decoder of 'gpr1' gpr encoding type disas: nanoMIPS: Rename the decoder of 'gpr1' gpr encoding type disas: nanoMIPS: Comment the decoder of 'gpr2.reg2' gpr encoding type disas: nanoMIPS: Rename the decoder of 'gpr2.reg2' gpr encoding type disas: nanoMIPS: Comment the decoder of 'gpr2.reg1' gpr encoding type disas: nanoMIPS: Rename the decoder of 'gpr2.reg1' gpr encoding type disas: nanoMIPS: Comment the decoder of 'gpr4.zero' gpr encoding type disas: nanoMIPS: Rename the decoder of 'gpr4.zero' gpr encoding type disas: nanoMIPS: Comment the decoder of 'gpr4' gpr encoding type disas: nanoMIPS: Rename the decoder of 'gpr4' gpr encoding type disas: nanoMIPS: Comment the decoder of 'gpr3.src.store' gpr encoding type disas: nanoMIPS: Rename the decoder of 'gpr3.src.store' gpr encoding type disas: nanoMIPS: Comment the decoder of 'gpr3' gpr encoding type disas: nanoMIPS: Rename the decoder of 'gpr3' gpr encoding type ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2019-01-03tests/tcg: mips: Test R5900 three-operand MADDU1Fredrik Noring
Test R5900 three-operand MADDU1. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org>
2019-01-03tests/tcg: mips: Test R5900 three-operand MADDUFredrik Noring
Test R5900 three-operand MADDU. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org>
2019-01-03tests/tcg: mips: Test R5900 three-operand MADD1Fredrik Noring
Test R5900 three-operand MADD1. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org>
2019-01-03tests/tcg: mips: Test R5900 three-operand MADDFredrik Noring
Test R5900 three-operand MADD. Reviewed-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com> Signed-off-by: Fredrik Noring <noring@nocrew.org>
2019-01-03disas: nanoMIPS: Add a note on documentationAleksandar Markovic
Add "nanoMIPS32 Instruction Set Technical Reference Manual" as a reference. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03disas: nanoMIPS: Reorder declarations and definitions of gpr decodersAleksandar Markovic
Reorder declarations and definitions of gpr decoders by number of input bits of corresponding encoding type. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
2019-01-03disas: nanoMIPS: Comment the decoder of 'gpr1' gpr encoding typeAleksandar Markovic
Comment the decoder of 'gpr1' gpr encoding type in nanoMIPS disassembler. Reviewed-by: Aleksandar Rikalo <arikalo@wavecomp.com> Signed-off-by: Aleksandar Markovic <amarkovic@wavecomp.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-26 04:46:08 +0000