aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-07-10target/mips: Add support of two XBurst CPUsSiarhei Volkau
XBurstR1 - is the MIPS32R1 CPU which aims to cover all Ingenic SoCs older than JZ4770 and some newer. XBurstR2 - is the MIPS32R2 CPU which aims to cover all Ingenic SoCs starting from to JZ4770. Signed-off-by: Siarhei Volkau <lis8215@gmail.com> Message-Id: <20230608104222.1520143-3-lis8215@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-07-10target/mips: Add emulation of MXU instructions for 32-bit load/storeSiarhei Volkau
Add support for emulating: - S32LDDV and S32LDDVR - S32STD and S32STDR - S32STDV and S32STDVR MXU instructions. Add support for emulating MXU instructions with address register post-modify counterparts: - S32LDI and S32LDIR - S32LDIV and S32LDIVR - S32SDI and S32SDIR - S32SDIV and S32SDIVR Refactor support for emulating the S32LDD and S32LDDR instructions. Signed-off-by: Siarhei Volkau <lis8215@gmail.com> Message-Id: <20230608104222.1520143-2-lis8215@gmail.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-07-10hw/mips/loongson3_virt: Relax CPU restrictions for TCGJiaxun Yang
After implemented CPUCFG and CSR, we are now able to boot Linux kernel with Loongson-3A4000 CPU, so there is no point to restrict CPU type to 3A1000 only, instead we just check for presence of INSN_LOONGSON3A. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Message-Id: <20230521214832.20145-3-jiaxun.yang@flygoat.com> [JY: Check for cpu_type_supports_isa(INSN_LOONGSON3A)] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-07-10target/mips: Implement Loongson CSR instructionsJiaxun Yang
Loongson introduced CSR instructions since 3A4000, which looks similar to IOCSR and CPUCFG instructions we seen in LoongArch. Unfortunately we don't have much document about those instructions, bit fields of CPUCFG instructions and IOCSR registers can be found at 3A4000's user manual, while instruction encodings can be found at arch/mips/include/asm/mach-loongson64/loongson_regs.h from Linux Kernel. Our predefined CPUCFG bits are differ from actual 3A4000, since we can't emulate all CPUCFG features present in 3A4000 for now, we just enable bits for what we have in TCG. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Message-Id: <20230521214832.20145-2-jiaxun.yang@flygoat.com> [JY: Fixed typo in ase_lcsr_available(), retrict GEN_FALSE_TRANS] [PMD: Fix meson's mips_softmmu_ss -> mips_system_ss, restrict AddressSpace/MemoryRegion to SysEmu] Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-07-10Merge tag 'qga-pull-2023-07-10' of https://github.com/kostyanf14/qemu into ↵Richard Henderson
staging qga-pull-2023-07-10 # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCgAdFiEEwsLBCepDxjwUI+uE711egWG6hOcFAmSsBN8ACgkQ711egWG6 # hOfGzw/9HJl1sQQQWO/Nv3HOtiC7Nnk3d06Wx8nC3d3L4fyDDsyCm1gBQK2YX6x5 # jlDCwgf28DoSDgvznyRvoUrDaQ4QBwcd2Xc5ukQRxZ4K2zEfWjp/NI7AWzUxQ2ID # G1dAWrnY94qm8vkkjAV6ABpDZNMWQlahwcABG8S5rFWaIqv+TSsFD9qRbrcA/LsJ # hKbcGSuWEzQSYcFD4ctGbQP4JgQQOO5Yk/3S7PO0+j/04vaYoers/9ZhRc8WhxGs # WAqxMdmUMcuYU0VkDLRVaGfJ5TrlHqm/iHz9UnTNbWekGjeNiEMyGN3shWCKN2AE # mMXU2zd74dBdMhwIzSlz7MW0XuX3TLrI3DZ9W7lY+8FfafQi8Dd2FPfPdKNDhEp0 # NQ8N/W6LAXPkVWci3uSvw50K+Q0svWee6mZV3qI6DbD1a8dRKvlFvvL7FCvHt8eF # 7YIHanJEzHbday31dhaRBBDn0EehBsFiJVImyfKBrMxGPfhTva+rH4KWKIW2pGfU # 3Sqk3KJ+c0Byh1Rkv6LTeYQSUV4x/fwve/EnvBhau1CyuoFSR0/Eoyqzi3aX3koL # Ord9BUGgmEc3TzDj0LhonEWnlWmNcUm/ck9dZTkYcDWyLLaArJ5pW9iUU9eh9Vx/ # 56r3/Jyz4QM6CjFmWWGEsEFMrM0wMGxl9JQKRcc39Eo2GpgWtuI= # =zeI3 # -----END PGP SIGNATURE----- # gpg: Signature made Mon 10 Jul 2023 02:17:19 PM BST # gpg: using RSA key C2C2C109EA43C63C1423EB84EF5D5E8161BA84E7 # gpg: Good signature from "Kostiantyn Kostiuk (Upstream PR sign) <kkostiuk@redhat.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: C2C2 C109 EA43 C63C 1423 EB84 EF5D 5E81 61BA 84E7 * tag 'qga-pull-2023-07-10' of https://github.com/kostyanf14/qemu: QGA VSS: Add log in functions begin/end QGA VSS: Print error in err_set QGA VSS: Replace 'fprintf(stderr' with qga_debug QGA VSS: Add wrapper to send log to debugger and stderr qga: Add tests for --allow-rpcs option qga: Add new option --allow-rpcs qga: Rename ga_disable_not_allowed -> ga_disable_not_allowed_freeze Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-07-10Merge tag 'pull-riscv-to-apply-20230710-1' of ↵Richard Henderson
https://github.com/alistair23/qemu into staging Third RISC-V PR for 8.1 * Use xl instead of mxl for disassemble * Factor out extension tests to cpu_cfg.h * disas/riscv: Add vendor extension support * disas/riscv: Add support for XVentanaCondOps * disas/riscv: Add support for XThead* instructions * Fix mstatus related problems * Fix veyron-v1 CPU properties * Fix the xlen for data address when MPRV=1 * opensbi: Upgrade from v1.2 to v1.3 * Enable 32-bit Spike OpenSBI boot testing * Support the watchdog timer of HiFive 1 rev b * Only build qemu-system-riscv$$ on rv$$ host * Add RVV registers to log * Restrict ACLINT to TCG * Add syscall riscv_hwprobe * Add support for BF16 extensions * KVM_RISCV_SET_TIMER macro is not configured correctly * Generate devicetree only after machine initialization is complete * virt: Convert fdt_load_addr to uint64_t * KVM: fixes and enhancements * Add support for the Zfa extension # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmSr+ekACgkQr3yVEwxT # gBMMGg//ZCcyH3KXB49c2KUIFO6FKYUxN9uC3giZCtuGyEH8T2yDgZVVXnxwU+Ij # +3Ej6T/ZdWMpePC9qf+xKzHWZk7Qc8Tcg+JgQbga573894yZInRwYl8HsSlEKA+Z # vlqSBPxTlp9rlDwGP/LjGljyIFqL4konk9zi3FL4ZXTF1iHUGrh/953Y3wIreEfl # KX5UznnWcgy2BqQT1vihMbM8qCVK6iryH+QZ6LiAsPMSX1rIzk8ectQryILzoIYh # bMiwCLVMyr4ZrUXjmGTF+7/WcOWwhhyfpdstf2iotKALelZtVHit0wHcty2GYQde # nvN83jJWu04DGXkPBUsqCUQXczGo1QHjJUH3RIRJzfOby/lGt4pSzHAfKA+iNUht # ikM3SdBsXMO+ogjTtTcCMb7/m2vsMoQP60VRts9Mh3YVD0cgr7RqpqRoEMugVYnr # ca8Vijf71mB+y+pq477eV1Q8BoKpr8xa1OlFkNKPC17uMD7HoDMI44QgFOgtYp10 # TMsqqyB75q6PZhSEwm63xbmH0Zpo8kSqT/E3MTtGTyPeuL8TNNNSkCmFaGYmRrbI # XEp7vG2RaDJOvDomS3nUhA5ruc8SaXd0q25q2gLYQfCsehfFqZAwuNB5xf1zS0M0 # ov1/gwaqU93t6nLbo2cCbb0plkIFKwwJ9KKjD06wJ4KPe0TGFzk= # =3XFD # -----END PGP SIGNATURE----- # gpg: Signature made Mon 10 Jul 2023 01:30:33 PM BST # gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013 # gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013 * tag 'pull-riscv-to-apply-20230710-1' of https://github.com/alistair23/qemu: (54 commits) riscv: Add support for the Zfa extension target/riscv/kvm.c: read/write (cbom|cboz)_blocksize in KVM target/riscv/kvm.c: add kvmconfig_get_cfg_addr() helper target/riscv: update multi-letter extension KVM properties target/riscv/cpu.c: create KVM mock properties target/riscv/cpu.c: remove priv_ver check from riscv_isa_string_ext() target/riscv/cpu.c: add satp_mode properties earlier target/riscv/kvm.c: add multi-letter extension KVM properties target/riscv/kvm.c: update KVM MISA bits target/riscv: add KVM specific MISA properties target/riscv/cpu: add misa_ext_info_arr[] target/riscv/kvm.c: init 'misa_ext_mask' with scratch CPU target/riscv: handle mvendorid/marchid/mimpid for KVM CPUs target/riscv: read marchid/mimpid in kvm_riscv_init_machine_ids() target/riscv: use KVM scratch CPUs to init KVM properties target/riscv/cpu.c: restrict 'marchid' value target/riscv/cpu.c: restrict 'mimpid' value target/riscv/cpu.c: restrict 'mvendorid' value hw/riscv/virt.c: skip 'mmu-type' FDT if satp mode not set target/riscv: skip features setup for KVM CPUs ... Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-07-10hw/pci/pci: Remove multifunction parameter from ↵Bernhard Beschow
pci_create_simple_multifunction() There is also pci_create_simple() which creates non-multifunction PCI devices. Accordingly the parameter is always set to true when a multi function PCI device is to be created. The reason for the parameter's existence seems to be that it is used in the internal PCI code as well which is the only location where it gets set to false. This one usage can be replaced by trivial code. Remove this redundant, error-prone parameter. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Message-Id: <20230304114043.121024-5-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10hw/i386/pc_piix: Move i440fx' realize near its qdev_new()Bernhard Beschow
I440FX realization is currently mixed with PIIX3 creation. Furthermore, it is common practice to only set properties between a device's qdev_new() and qdev_realize(). Clean up to resolve both issues. Since I440FX spawns a PCI bus let's also move the pci_bus initialization there. Note that when running `qemu-system-x86_64 -M pc -S` before and after this patch, `info mtree` in the QEMU console doesn't show any differences except that the ordering is different. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230630073720.21297-18-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10hw/pci-host/i440fx: Resolve i440fx_init()Bernhard Beschow
i440fx_init() is a legacy init function. The previous patches worked towards TYPE_I440FX_PCI_HOST_BRIDGE to be instantiated the QOM way. Do this now by transforming the parameters passed to i440fx_init() into property assignments. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Message-Id: <20230630073720.21297-17-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-07-10hw/pci-host/i440fx: Add I440FX_HOST_PROP_PCI_TYPE propertyBernhard Beschow
I440FX needs a different PCI device model if the "igd-passthru" property is enabled. The type name is currently passed as a parameter to i440fx_init(). This parameter will be replaced by a property assignment once i440fx_init() gets resolved. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Message-Id: <20230630073720.21297-16-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10hw/pci-host/i440fx: Add PCI_HOST_{ABOVE, BELOW}_4G_MEM_SIZE propertiesBernhard Beschow
Introduce the properties in anticipation of QOM'ification; Q35 has the same properties. Note that we want to avoid a "ram size" property in the QOM interface since it seems redundant to both properties introduced in this change. Thus the removal of the ram_size parameter. We assume the invariant of both properties to sum up to "ram size" which is already asserted in pc_memory_init(). Under Xen the invariant seems to hold as well, so we now also check it there. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Message-Id: <20230630073720.21297-15-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10hw/pci-host/i440fx: Add PCI_HOST_PROP_IO_MEM propertyBernhard Beschow
Introduce the property in anticipation of QOM'ification; Q35 has the same property. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Message-Id: <20230630073720.21297-14-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10hw/pci-host/i440fx: Make MemoryRegion pointers accessible as propertiesBernhard Beschow
The goal is to eliminate i440fx_init() which is a legacy init function. This neccessitates the memory regions to be properties, like in Q35, which will be assigned in board code. Since i440fx needs different PCI devices in Xen mode, and since i440fx shall be self-contained, the PCI device will be created during realization of the host. Thus the pointers need to be moved to the host structure to be usable as properties. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230630073720.21297-13-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10hw/pci-host/i440fx: Move i440fx_realize() into PCII440FXState sectionBernhard Beschow
i440fx_realize() realizes the PCI device inside the host bridge (PCII440FXState), but is implemented between i440fx_pcihost_realize() and i440fx_init() which deal with the host bridge itself (I440FXState). Since we want to append i440fx_init() to i440fx_pcihost_realize() later let's move i440fx_realize() out of the way. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230630073720.21297-12-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10hw/pci-host/i440fx: Have common names for some local variablesBernhard Beschow
`PCIHostState` is often referred to as `phb`, own device state usually as `s`. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230630073720.21297-11-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10hw/pci-host/i440fx: Replace magic values by existing constantsBernhard Beschow
Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230630073720.21297-10-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10hw/pci-host/i440fx: Add "i440fx" child property in board codeBernhard Beschow
The parent-child relation is usually established near a child's qdev_new(). For i440fx this allows for reusing the machine parameter, thus avoiding qdev_get_machine() which relies on a global variable. Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Bernhard Beschow <shentey@gmail.com> Message-Id: <20230630073720.21297-9-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10hw/i386/pc_piix: Turn some local variables into initializersBernhard Beschow
Eliminates an else branch. Suggested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230630073720.21297-8-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10hw/pci-host/q35: Make some property name macros reusable by i440fxBernhard Beschow
Signed-off-by: Bernhard Beschow <shentey@gmail.com> Message-Id: <20230630073720.21297-7-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10hw/pci-host/q35: Initialize PCI_HOST_BYPASS_IOMMU property from board codeBernhard Beschow
The Q35 PCI host already has a PCI_HOST_BYPASS_IOMMU property. However, the host initializes this property itself by accessing global machine state, thereby assuming it to be a PC machine. Avoid this by having board code set this property. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230630073720.21297-6-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10hw/pci/pci_host: Introduce PCI_HOST_BYPASS_IOMMU macroBernhard Beschow
Introduce a macro to avoid copy and pasting strings which can easily cause typos. Suggested-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20230630073720.21297-5-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10hw/pci-host/q35: Initialize PCMachineState::bus in board codeBernhard Beschow
The Q35 PCI host currently sets the PC machine's PCI bus attribute through global state, thereby assuming the machine to be a PC machine. The Q35 machine code already holds on to Q35's pci bus attribute, so can easily set its own property while preserving encapsulation. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230630073720.21297-4-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10hw/pci-host/q35: Fix double, contradicting .endianness assignmentBernhard Beschow
Fixes the following clangd warning (-Winitializer-overrides): q35.c:297:19: Initializer overrides prior initialization of this subobject q35.c:292:19: previous initialization is here Settle on little endian which is consistent with using pci_host_conf_le_ops. Fixes: bafc90bdc594 ("q35: implement TSEG") Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230630073720.21297-3-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10hw/i386/pc_q35: Resolve redundant q35_host variableBernhard Beschow
The variable is redundant to "phb" and is never used by its real type. Signed-off-by: Bernhard Beschow <shentey@gmail.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230630073720.21297-2-shentey@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10vhost-user: Make RESET_DEVICE a per device messageTom Lonergan
A device reset is issued per device, not per VQ. The legacy device reset message, VHOST_USER_RESET_OWNER, is already a per device message. Therefore, this change adds the proper message, VHOST_USER_RESET_DEVICE, to per device messages. Signed-off-by: Tom Lonergan <tom.lonergan@nutanix.com> Message-Id: <20230628163927.108171-3-tom.lonergan@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
2023-07-10vhost-user: Change one_time to per_device requestTom Lonergan
Some devices, like virtio-scsi, consist of one vhost_dev, while others, like virtio-net, contain multiple vhost_devs. The QEMU vhost-user code has a concept of one-time messages which is misleading. One-time messages are sent once per operation on the device, not once for the lifetime of the device. Therefore, as discussed in [1], vhost_user_one_time_request should be renamed to vhost_user_per_device_request and the relevant comments updated to match the real functionality. [1] https://lore.kernel.org/qemu-devel/20230127083027-mutt-send-email-mst@kernel.org/ Signed-off-by: Tom Lonergan <tom.lonergan@nutanix.com> Message-Id: <20230628163927.108171-2-tom.lonergan@nutanix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
2023-07-10hw/smbios: Fix core count in type4Zhao Liu
>From SMBIOS 3.0 specification, core count field means: Core Count is the number of cores detected by the BIOS for this processor socket. [1] Before 003f230e37d7 ("machine: Tweak the order of topology members in struct CpuTopology"), MachineState.smp.cores means "the number of cores in one package", and it's correct to use smp.cores for core count. But 003f230e37d7 changes the smp.cores' meaning to "the number of cores in one die" and doesn't change the original smp.cores' use in smbios as well, which makes core count in type4 go wrong. Fix this issue with the correct "cores per socket" caculation. [1] SMBIOS 3.0.0, section 7.5.6, Processor Information - Core Count Fixes: 003f230e37d7 ("machine: Tweak the order of topology members in struct CpuTopology") Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Message-Id: <20230628135437.1145805-5-zhao1.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10hw/smbios: Fix thread count in type4Zhao Liu
>From SMBIOS 3.0 specification, thread count field means: Thread Count is the total number of threads detected by the BIOS for this processor socket. It is a processor-wide count, not a thread-per-core count. [1] So here we should use threads per socket other than threads per core. [1] SMBIOS 3.0.0, section 7.5.8, Processor Information - Thread Count Fixes: c97294ec1b9e ("SMBIOS: Build aggregate smbios tables and entry point") Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Message-Id: <20230628135437.1145805-4-zhao1.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10hw/smbios: Fix smbios_smp_sockets caculationZhao Liu
smp.sockets is the number of sockets which is configured by "-smp" ( otherwise, the default is 1). Trying to recalculate it here with another rules leads to errors, such as: 1. 003f230e37d7 ("machine: Tweak the order of topology members in struct CpuTopology") changes the meaning of smp.cores but doesn't fix original smp.cores uses. With the introduction of cluster, now smp.cores means the number of cores in one cluster. So smp.cores * smp.threads just means the threads in a cluster not in a socket. 2. On the other hand, we shouldn't use smp.cpus here because it indicates the initial number of online CPUs at the boot time, and is not mathematically related to smp.sockets. So stop reinventing the another wheel and use the topo values that has been calculated. Fixes: 003f230e37d7 ("machine: Tweak the order of topology members in struct CpuTopology") Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Message-Id: <20230628135437.1145805-3-zhao1.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10machine: Add helpers to get cores/threads per socketZhao Liu
The number of cores/threads per socket are needed for smbios, and are also useful for other modules. Provide the helpers to wrap the calculation of cores/threads per socket so that we can avoid calculation errors caused by other modules miss topology changes. Suggested-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Zhao Liu <zhao1.liu@intel.com> Message-Id: <20230628135437.1145805-2-zhao1.liu@linux.intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10tests/qtest: enable tests for virtio-scmiMilan Zamazal
We don't have a virtio-scmi implementation in QEMU and only support a vhost-user backend. This is very similar to virtio-gpio and we add the same set of tests, just passing some vhost-user messages over the control socket. Signed-off-by: Milan Zamazal <mzamazal@redhat.com> Acked-by: Thomas Huth <thuth@redhat.com> Message-Id: <20230628100524.342666-4-mzamazal@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10hw/virtio: Add vhost-user-scmi-pci boilerplateMilan Zamazal
This allows is to instantiate a vhost-user-scmi device as part of a PCI bus. It is mostly boilerplate similar to the other vhost-user-*-pci boilerplates of similar devices. Signed-off-by: Milan Zamazal <mzamazal@redhat.com> Message-Id: <20230628100524.342666-3-mzamazal@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10hw/virtio: Add boilerplate for vhost-user-scmi deviceMilan Zamazal
This creates the QEMU side of the vhost-user-scmi device which connects to the remote daemon. It is based on code of similar vhost-user devices. Signed-off-by: Milan Zamazal <mzamazal@redhat.com> Message-Id: <20230628100524.342666-2-mzamazal@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10vhost-user-gpu: implement get_edid frontend featureErico Nunes
Implement the frontend side of the get_edid feature in the qemu vhost-user-gpu frontend device. Signed-off-by: Erico Nunes <ernunes@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20230626164708.1163239-5-ernunes@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10contrib/vhost-user-gpu: implement get_edid featureErico Nunes
Implement the virtio-gpu feature in contrib/vhost-user-gpu, which was unsupported until now. In this implementation, the feature is enabled inconditionally to avoid creating another optional config argument. Similarly to get_display_info, vhost-user-gpu sends a message back to the frontend to have access to all the display information. In the case of get_edid, it also needs to pass which scanout we should retrieve the edid for. The VHOST_USER_GPU_PROTOCOL_F_EDID protocol feature is required if the frontend sets the VIRTIO_GPU_F_EDID virtio-gpu feature. If the frontend sets the virtio-gpu feature but does not support the protocol feature, the backend will abort with an error. Signed-off-by: Erico Nunes <ernunes@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20230626164708.1163239-4-ernunes@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10docs: vhost-user-gpu: add protocol changes for EDIDErico Nunes
VHOST_USER_GPU_GET_EDID is defined as a message from the backend to the frontend to retrieve the EDID data for a given scanout. The VHOST_USER_GPU_PROTOCOL_F_EDID protocol feature is defined as a way to check whether this new message is supported or not. Signed-off-by: Erico Nunes <ernunes@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20230626164708.1163239-3-ernunes@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10virtio-gpu: refactor generate_edid function to virtio_gpu_baseErico Nunes
This functionality can be shared with upcoming use in vhost-user-gpu, so move it to the shared file to avoid duplicating it. Signed-off-by: Erico Nunes <ernunes@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20230626164708.1163239-2-ernunes@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10target/mips: Rework cp0_timer with clock APIJiaxun Yang
Previous implementation of MIPS cp0_timer computes a cp0_count_ns based on input clock. However rounding error of cp0_count_ns can affect precision of cp0_timer. Using clock API and a divider for cp0_timer, so we can use clock_ns_to_ticks/clock_ns_to_ticks to avoid rounding issue. Also workaround the situation that in such handler flow: count = read_c0_count() write_c0_compare(count) If timer had not progressed when compare was written, the interrupt would trigger again. Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230521110037.90049-1-jiaxun.yang@flygoat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
2023-07-10virtio-net: pass Device-TLB enable/disable events to vhostViktor Prutyanov
If vhost is enabled for virtio-net, Device-TLB enable/disable events must be passed to vhost for proper IOMMU unmap flag selection. Signed-off-by: Viktor Prutyanov <viktor@daynix.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20230626091258.24453-3-viktor@daynix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10vhost: register and change IOMMU flag depending on Device-TLB stateViktor Prutyanov
The guest can disable or never enable Device-TLB. In these cases, it can't be used even if enabled in QEMU. So, check Device-TLB state before registering IOMMU notifier and select unmap flag depending on that. Also, implement a way to change IOMMU notifier flag if Device-TLB state is changed. Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2001312 Signed-off-by: Viktor Prutyanov <viktor@daynix.com> Acked-by: Jason Wang <jasowang@redhat.com> Message-Id: <20230626091258.24453-2-viktor@daynix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10vdpa: Remove status in reset tracingEugenio Pérez
It is always 0 and it is not useful to route call through file descriptor. Reviewed-by: Stefano Garzarella <sgarzare@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Eugenio Pérez <eperezma@redhat.com> Message-Id: <20230526153736.472443-1-eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10Merge tag 'pull-request-2023-07-10v2' of https://gitlab.com/thuth/qemu into ↵Richard Henderson
staging * s390x instruction emulation fixes and corresponding TCG tests * Extend the readconfig qtest * Introduce "-run-with chroot=..." and deprecate the old "-chroot" option * Speed up migration tests * Fix coding style in the coding style document # -----BEGIN PGP SIGNATURE----- # # iQJFBAABCAAvFiEEJ7iIR+7gJQEY8+q5LtnXdP5wLbUFAmSsCYQRHHRodXRoQHJl # ZGhhdC5jb20ACgkQLtnXdP5wLbUhLw/+Mg74FGODwb/kdPSSY+ahEmutRaQG5z74 # zWnHFYTB0xLRxu5gwV09wcFt88RjkkdsKORtp1LBRahVaKYzYSq3PxMYsDii2pdr # Ma58RLZC/42shrzZmXEyl3ilxCCHjq2UCezX+4ca/zuTl/83znVN6Mrq28GUmp7v # 8yI78mPpZXEkLEN3cnnK3v7AsLwz439aHd3ADZ1IWUohGHQdDAj4nn5Yxp4SeIUj # sOmCcEfLj3emNM/TTL2suohuZNwYjyLQ5iqQJ/B7v/S88PbWQUA9Cq/KpEGBLk/D # fxDjbQ7+zpTTSQ+XihShtGdEnl4uPPixvJX43vriYDBQFsHKS7Y38cSAFVTDrQvh # 4fELCAPg8wXeoyMu7WZWINDA6dVdInCdmljHYpK+mQg7AtHu/CliPWzVUZyeW3XD # lwybNCoyJQcA4KPAyYrkau74JrLRGtLJJQ5XtQEDsK791xjeHt1hr42QY4YeHyjM # Utf6inp4D7RZ3O9p5EeKNVpFin5AE+RTvNZKLJicFRb0hFziUkCK61nRwS5gmvXA # I41av1L+mLI7jvu0M2ID1CfIhFf+/w4GKNkUlcutux7uz5mzxIj0oifsONEZGNo+ # NlVKKNxfQv2eRl+9sZPWNl8q11K3bvZbpvXZS5oSLIererWIIROaxcgzxpU+EGLT # 8HhF7RZdO8w= # =LLmM # -----END PGP SIGNATURE----- # gpg: Signature made Mon 10 Jul 2023 02:37:08 PM BST # gpg: using RSA key 27B88847EEE0250118F3EAB92ED9D774FE702DB5 # gpg: issuer "thuth@redhat.com" # gpg: Good signature from "Thomas Huth <th.huth@gmx.de>" [undefined] # gpg: aka "Thomas Huth <thuth@redhat.com>" [undefined] # gpg: aka "Thomas Huth <th.huth@posteo.de>" [unknown] # gpg: aka "Thomas Huth <huth@tuxfamily.org>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5 * tag 'pull-request-2023-07-10v2' of https://gitlab.com/thuth/qemu: (21 commits) docs/devel: Fix coding style in style.rst tests/qtest: massively speed up migration-test tests/tcg/s390x: Fix test-svc with clang meson.build: Skip C++ detection unless we're targeting Windows os-posix: Allow 'chroot' via '-run-with' and deprecate the old '-chroot' option tests/qtest/readconfig: Test the docs/config/q35-*.cfg files tests/qtest: Move mkimg() and have_qemu_img() from libqos to libqtest tests/qtest/readconfig-test: Allow testing for arbitrary memory sizes tests/tcg/s390x: Test MVCRL with a large value in R0 tests/tcg/s390x: Test MDEB and MDEBR tests/tcg/s390x: Test LRA tests/tcg/s390x: Test LARL with a large offset tests/tcg/s390x: Test EPSW target/s390x: Fix relative long instructions with large offsets target/s390x: Fix LRA when DAT is off target/s390x: Fix LRA overwriting the top 32 bits on DAT error target/s390x: Fix MVCRL with a large value in R0 target/s390x: Fix MDEB and MDEBR target/s390x: Fix EPSW CC reporting linux-user: elfload: Add more initial s390x PSW bits ... Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-07-10docs/devel: Fix coding style in style.rstThomas Huth
As defined earlier in this file, the opening curly brace of functions should be placed on a separate line. So we should do it in the examples here, too. Fixes: 821f296756 ("docs: document use of automatic cleanup functions in glib") Reported-by: Konstantin Kostiuk <kkostiuk@redhat.com> Message-Id: <20230710092638.161625-1-thuth@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-07-10tests/qtest: massively speed up migration-testDaniel P. Berrangé
The migration test cases that actually exercise live migration want to ensure there is a minimum of two iterations of pre-copy, in order to exercise the dirty tracking code. Historically we've queried the migration status, looking for the 'dirty-sync-count' value to increment to track iterations. This was not entirely reliable because often all the data would get transferred quickly enough that the migration would finish before we wanted it to. So we massively dropped the bandwidth and max downtime to guarantee non-convergance. This had the unfortunate side effect that every migration took at least 30 seconds to run (100 MB of dirty pages / 3 MB/sec). This optimization takes a different approach to ensuring that a mimimum of two iterations. Rather than waiting for dirty-sync-count to increment, directly look for an indication that the source VM has dirtied RAM that has already been transferred. On the source VM a magic marker is written just after the 3 MB offset. The destination VM is now montiored to detect when the magic marker is transferred. This gives a guarantee that the first 3 MB of memory have been transferred. Now the source VM memory is monitored at exactly the 3MB offset until we observe a flip in its value. This gives us a guaranteed that the guest workload has dirtied a byte that has already been transferred. Since we're looking at a place that is only 3 MB from the start of memory, with the 3 MB/sec bandwidth, this test should complete in 1 second, instead of 30 seconds. Once we've proved there is some dirty memory, migration can be set back to full speed for the remainder of the 1st iteration, and the entire of the second iteration at which point migration should be complete. On a test machine this further reduces the migration test time from 8 minutes to 1 minute 40. Signed-off-by: Daniel P. Berrangé <berrange@redhat.com> Message-Id: <20230601161347.1803440-11-berrange@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-07-10tests/tcg/s390x: Fix test-svc with clangIlya Leoshkevich
clang does not support expressions involving symbols in instructions like lghi yet, so building hello-s390x-asm.S with it fails. Move the expression to the literal pool and load it from there. Fixes: be4a4cb42961 ("tests/tcg/s390x: Test single-stepping SVC") Reported-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Message-Id: <20230707154242.457706-1-iii@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-07-10meson.build: Skip C++ detection unless we're targeting WindowsThomas Huth
The only C++ code that we currently still have in the repository is the code in qga/vss-win32/ - so we can skip the C++ detection unless we are compiling binaries for Windows. Message-Id: <20230705133639.146073-1-thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-07-10os-posix: Allow 'chroot' via '-run-with' and deprecate the old '-chroot' optionThomas Huth
We recently introduced "-run-with" for options that influence the runtime behavior of QEMU. This option has the big advantage that it can group related options (so that it is easier for the users to spot them) and that the options become introspectable via QMP this way. So let's start moving more switches into this option group, starting with "-chroot" now. Reviewed-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Reviewed-by: Michael Tokarev <mjt@tls.msk.ru> Reviewed-by: Ján Tomko <jtomko@redhat.com> Message-Id: <20230703074447.17044-1-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-07-10tests/qtest/readconfig: Test the docs/config/q35-*.cfg filesThomas Huth
Test that we can successfully parse the docs/config/q35-emulated.cfg, docs/config/q35-virtio-graphical.cfg and docs/config/q35-virtio-serial.cfg config files (the "...-serial.cfg" file is a subset of the graphical config file, so we skip that in quick mode). These config files use two hard-coded image names which we have to replace with unique temporary files to avoid race conditions in case the tests are run in parallel. So after creating the temporary image files, we also have to create a copy of the config file where we replaced the hard-coded image names. If KVM is not available, we also have to disable the "accel" lines. Once everything is in place, we can start QEMU with the modified config file and check that everything is available in QEMU. Message-Id: <20230704071655.75381-4-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-07-10tests/qtest: Move mkimg() and have_qemu_img() from libqos to libqtestThomas Huth
These two functions can be useful for other qtests beside the qos-test, too, so move them to libqtest instead. Message-Id: <20230704071655.75381-3-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2023-07-10tests/qtest/readconfig-test: Allow testing for arbitrary memory sizesThomas Huth
Make test_x86_memdev_resp() more flexible by allowing arbitrary memory sizes as parameter here. Message-Id: <20230704071655.75381-2-thuth@redhat.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-16 08:18:16 +0000