aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-06-02fdc: Rename fdctrl_set_fifo() to fdctrl_to_result_phase()Kevin Wolf
What callers really do with this function is to switch from execution phase (including data transfers) to result phase where the guest can read out one or more status bytes from the FIFO (the number depends on the command). Rename the function accordingly. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 1432214378-31891-3-git-send-email-kwolf@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2015-06-02fdc: Rename fdctrl_reset_fifo() to fdctrl_to_command_phase()Kevin Wolf
What all callers of fdctrl_reset_fifo() really want to do is to start the command phase, where writes to the data port initiate a new command. The function doesn't only clear the FIFO, but also sets up the state so that a new command can be received. Rename it to reflect this. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 1432214378-31891-2-git-send-email-kwolf@redhat.com Signed-off-by: John Snow <jsnow@redhat.com>
2015-06-02Merge remote-tracking branch 'remotes/sstabellini/tags/xen-15-06-02-tag' ↵Peter Maydell
into staging XSA 128 129 130 131 # gpg: Signature made Tue Jun 2 16:46:38 2015 BST using RSA key ID 70E1AE90 # gpg: Good signature from "Stefano Stabellini <stefano.stabellini@eu.citrix.com>" * remotes/sstabellini/tags/xen-15-06-02-tag: xen/pt: unknown PCI config space fields should be read-only xen/pt: add a few PCI config space field descriptions xen/pt: mark reserved bits in PCI config space fields xen/pt: mark all PCIe capability bits read-only xen/pt: split out calculation of throughable mask in PCI config space handling xen/pt: correctly handle PM status bit xen/pt: consolidate PM capability emu_mask xen/MSI: don't open-code pass-through of enable bit modifications xen/MSI-X: limit error messages xen: don't allow guest to control MSI mask register xen: properly gate host writes of modified PCI CFG contents Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-02xen/pt: unknown PCI config space fields should be read-onlyJan Beulich
... by default. Add a per-device "permissive" mode similar to pciback's to allow restoring previous behavior (and hence break security again, i.e. should be used only for trusted guests). This is part of XSA-131. Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>)
2015-06-02xen/pt: add a few PCI config space field descriptionsJan Beulich
Since the next patch will turn all not explicitly described fields read-only by default, those fields that have guest writable bits need to be given explicit descriptors. This is a preparatory patch for XSA-131. Signed-off-by: Jan Beulich <jbeulich@suse.com>
2015-06-02xen/pt: mark reserved bits in PCI config space fieldsJan Beulich
The adjustments are solely to make the subsequent patches work right (and hence make the patch set consistent), namely if permissive mode (introduced by the last patch) gets used (as both reserved registers and reserved fields must be similarly protected from guest access in default mode, but the guest should be allowed access to them in permissive mode). This is a preparatory patch for XSA-131. Signed-off-by: Jan Beulich <jbeulich@suse.com>
2015-06-02xen/pt: mark all PCIe capability bits read-onlyJan Beulich
xen_pt_emu_reg_pcie[]'s PCI_EXP_DEVCAP needs to cover all bits as read- only to avoid unintended write-back (just a precaution, the field ought to be read-only in hardware). This is a preparatory patch for XSA-131. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-06-02xen/pt: split out calculation of throughable mask in PCI config space handlingJan Beulich
This is just to avoid having to adjust that calculation later in multiple places. Note that including ->ro_mask in get_throughable_mask()'s calculation is only an apparent (i.e. benign) behavioral change: For r/o fields it doesn't matter > whether they get passed through - either the same flag is also set in emu_mask (then there's no change at all) or the field is r/o in hardware (and hence a write won't change it anyway). This is a preparatory patch for XSA-131. Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
2015-06-02xen/pt: correctly handle PM status bitJan Beulich
xen_pt_pmcsr_reg_write() needs an adjustment to deal with the RW1C nature of the not passed through bit 15 (PCI_PM_CTRL_PME_STATUS). This is a preparatory patch for XSA-131. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-06-02xen/pt: consolidate PM capability emu_maskJan Beulich
There's no point in xen_pt_pmcsr_reg_{read,write}() each ORing PCI_PM_CTRL_STATE_MASK and PCI_PM_CTRL_NO_SOFT_RESET into a local emu_mask variable - we can have the same effect by setting the field descriptor's emu_mask member suitably right away. Note that xen_pt_pmcsr_reg_write() is being retained in order to allow later patches to be less intrusive. This is a preparatory patch for XSA-131. Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Ian Campbell <ian.campbell@citrix.com>
2015-06-02xen/MSI: don't open-code pass-through of enable bit modificationsJan Beulich
Without this the actual XSA-131 fix would cause the enable bit to not get set anymore (due to the write back getting suppressed there based on the OR of emu_mask, ro_mask, and res_mask). Note that the fiddling with the enable bit shouldn't really be done by qemu, but making this work right (via libxc and the hypervisor) will require more extensive changes, which can be postponed until after the security issue got addressed. This is a preparatory patch for XSA-131. Signed-off-by: Jan Beulich <jbeulich@suse.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-06-02xen/MSI-X: limit error messagesJan Beulich
Limit error messages resulting from bad guest behavior to avoid allowing the guest to cause the control domain's disk to fill. The first message in pci_msix_write() can simply be deleted, as this is indeed bad guest behavior, but such out of bounds writes don't really need to be logged. The second one is more problematic, as there guest behavior may only appear to be wrong: For one, the old logic didn't take the mask-all bit into account. And then this shouldn't depend on host device state (i.e. the host may have masked the entry without the guest having done so). Plus these writes shouldn't be dropped even when an entry is unmasked. Instead, if they can't be made take effect right away, they should take effect on the next unmasking or enabling operation - the specification explicitly describes such caching behavior. Until we can validly drop the message (implementing such caching/latching behavior), issue the message just once per MSI-X table entry. Note that the log message in pci_msix_read() similar to the one being removed here is not an issue: "addr" being of unsigned type, and the maximum size of the MSI-X table being 32k, entry_nr simply can't be negative and hence the conditonal guarding issuing of the message will never be true. This is XSA-130. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-06-02xen: don't allow guest to control MSI mask registerJan Beulich
It's being used by the hypervisor. For now simply mimic a device not capable of masking, and fully emulate any accesses a guest may issue nevertheless as simple reads/writes without side effects. This is XSA-129. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-06-02xen: properly gate host writes of modified PCI CFG contentsJan Beulich
The old logic didn't work as intended when an access spanned multiple fields (for example a 32-bit access to the location of the MSI Message Data field with the high 16 bits not being covered by any known field). Remove it and derive which fields not to write to from the accessed fields' emulation masks: When they're all ones, there's no point in doing any host write. This fixes a secondary issue at once: We obviously shouldn't make any host write attempt when already the host read failed. This is XSA-128. Signed-off-by: Jan Beulich <jbeulich@suse.com> Reviewed-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
2015-06-02target-arm: Correct check for non-EL3Edgar E. Iglesias
This fixes a compile warning from clang 3.5 (the assertion could never fire). Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com> Message-id: 1432881807-18164-2-git-send-email-edgar.iglesias@gmail.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: John Snow <jsnow@redhat.com> [PMM: added note in commit message that this is fixing a build warning] Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-02Merge remote-tracking branch 'remotes/kraxel/tags/pull-input-20150602-1' ↵Peter Maydell
into staging virtio-input: two small fixups # gpg: Signature made Tue Jun 2 09:32:51 2015 BST using RSA key ID D3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" * remotes/kraxel/tags/pull-input-20150602-1: virtio-input: make virtio devices follow usual naming convention virtio-input: const_le16 and const_le32 not build time constant Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-02Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
pc build fix My last pull breaks build on systems with iasl. Fix this up. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Mon Jun 1 20:41:08 2015 BST using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: acpi: add missing ssdt Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-02virtio-input: make virtio devices follow usual naming conventionGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-06-02virtio-input: const_le16 and const_le32 not build time constantMichael Mueller
As the implementation of const_le16 and const_le32 is not build time constant on big endian systems this need to be fixed. CC hw/input/virtio-input-hid.o hw/input/virtio-input-hid.c:340:13: error: initializer element is not constant hw/input/virtio-input-hid.c:340:13: error: (near initialization for ‘virtio_keyboard_config[1].u.ids.bustype’) ... Signed-off-by: Michael Mueller <mimu@linux.vnet.ibm.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2015-06-01acpi: add missing ssdtMichael S. Tsirkin
commit 5cb18b3d7bff2a83275ee98af2a14eb9e21c93ab TPM2 ACPI table support was missing a file, so build with iasl fails (build without iasl works since it uses the generated hex files). Reported-by: "Daniel P. Berrange" <berrange@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-01Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into stagingPeter Maydell
pc, pci, tpm, virtio, vhost enhancements and fixes A bunch of cleanups and fixes all over the place, enhancements in TPM, virtio and vhost. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Mon Jun 1 13:19:48 2015 BST using RSA key ID D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" * remotes/mst/tags/for_upstream: (60 commits) vhost-user: add multi queue support virtio: make features 64bit wide qdev: add 64bit properties virtio-mmio: ioeventfd support hw/acpi/aml-build: Fix memory leak acpi: add aml_while() term acpi: add aml_increment() term acpi: add aml_shiftright() term acpi: add aml_shiftleft() term acpi: add aml_index() term acpi: add aml_lless() term acpi: add aml_add() term TPM2 ACPI table support tpm: Probe for connected TPM 1.2 or TPM 2 Extend TPM TIS interface to support TPM 2 Add stream ID to MSI write acpi: Simplify printing to dynamic string i386: drop FDC in pc-q35-2.4+ if neither it nor floppy drives are wanted i386/pc_q35: don't insist on board FDC if there's no default floppy i386/pc: '-drive if=floppy' should imply a board-default FDC ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-06-01vhost-user: add multi queue supportOuyang Changchun
Based on patch by Nikolay Nikolaev: Vhost-user will implement the multi queue support in a similar way to what vhost already has - a separate thread for each queue. To enable the multi queue functionality - a new command line parameter "queues" is introduced for the vhost-user netdev. Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com> Signed-off-by: Changchun Ouyang <changchun.ouyang@intel.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-01virtio: make features 64bit wideGerd Hoffmann
Make features 64bit wide everywhere. On migration a full 64bit guest_features field is sent if one of the high bits is set, in addition to the lower 32bit guest_features field which must stay for compatibility reasons. That way we send the lower 32 feature bits twice, but the code is simpler because we don't have to split and compose the 64bit features into two 32bit fields. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-01qdev: add 64bit propertiesGerd Hoffmann
Needed for virtio features which go from 32bit to 64bit with virtio 1.0 Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-01virtio-mmio: ioeventfd supportYing-Shiuan Pan
set_host_notifier and set_guest_notifiers supported by virtio-mmio now. Most code copied from virtio-pci. This makes it possible to use vhost-net with virtio-mmio, improving performance by about 30%. The kvm-arm does not yet support irqfd, need to fix the hard-coded part after kvm-arm gets irqfd support. Signed-off-by: Ying-Shiuan Pan <yingshiuan.pan@gmail.com> Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-01hw/acpi/aml-build: Fix memory leakShannon Zhao
Signed-off-by: Shannon Zhao <zhaoshenglong@huawei.com> Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2015-06-01acpi: add aml_while() termMarcel Apfelbaum
Add encoding for ACPI DefWhile Opcode. Reviewed-by: Shannon Zhao <zhaoshenglong@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-01acpi: add aml_increment() termMarcel Apfelbaum
Add encoding for ACPI DefIncrement Opcode. Reviewed-by: Shannon Zhao <zhaoshenglong@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-01acpi: add aml_shiftright() termMarcel Apfelbaum
Add encoding for ACPI DefShiftRight Opcode. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
2015-06-01acpi: add aml_shiftleft() termMarcel Apfelbaum
Add encoding for ACPI DefShiftLeft Opcode. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
2015-06-01acpi: add aml_index() termMarcel Apfelbaum
Add encoding for ACPI DefIndex Opcode. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
2015-06-01acpi: add aml_lless() termMarcel Apfelbaum
Add encoding for ACPI DefLLess Opcode. Reviewed-by: Shannon Zhao <zhaoshenglong@huawei.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-01acpi: add aml_add() termMarcel Apfelbaum
Add encoding for ACPI DefAdd Opcode. Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
2015-06-01TPM2 ACPI table supportStefan Berger
Add a TPM2 ACPI table if a TPM 2 is used in the backend. Also add an SSDT for the TPM 2. Rename tpm_find() to tpm_get_version() and have this function return the version of the TPM found, TPMVersion_Unspec if no TPM is found. Use the version number to build version specific ACPI tables. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-06-01Merge remote-tracking branch ↵Peter Maydell
'remotes/bkoppelmann/tags/pull-tricore-20150530' into staging TriCore bugfixes # gpg: Signature made Sat May 30 15:50:49 2015 BST using RSA key ID 6B69CA14 # gpg: Good signature from "Bastian Koppelmann <kbastian@mail.uni-paderborn.de>" * remotes/bkoppelmann/tags/pull-tricore-20150530: target-tricore: fix BOL_ST_H_LONGOFF using ld target-tricore: fix msub32_q producing the wrong overflow bit target-tricore: fix OPC2_32_RR_DVINIT_HU having write before use on the result Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2015-05-31tpm: Probe for connected TPM 1.2 or TPM 2Stefan Berger
In the TPM passthrough backend driver, modify the probing code so that we can check whether a TPM 1.2 or TPM 2 is being used and adapt the behavior of the TPM TIS accordingly. Move the code that tested for a TPM 1.2 into tpm_utils.c and extend it with test for probing for TPM 2. Have the function return the version of TPM found. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-05-31Extend TPM TIS interface to support TPM 2Stefan Berger
Following the recent upgrade to version 1.3, extend the TPM TIS interface with capabilities introduced for support of a TPM 2. TPM TIS for TPM 2 introduced the following extensions beyond the TPM TIS 1.3 (used for TPM 1.2): - A new 32bit interface Id register was introduced. - New flags for the status (STS) register were defined. - New flags for the capability flags were defined. Support the above if a TPM TIS 1.3 for TPM 2 is used with a TPM 2 on the backend side. Support the old TPM TIS 1.3 configuration if a TPM 1.2 is being used. A subsequent patch will then determine which TPM version is being used in the backend. Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-05-31Add stream ID to MSI writePavel Fedin
GICv3 ITS distinguishes between devices by using hardwired device IDs passed on the bus. This patch implements passing these IDs in qemu. SMMU is also known to use stream IDs, therefore this addition can also be useful for implementing platforms with SMMU. Signed-off-by: Pavel Fedin <p.fedin@samsung.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Changes from v1: - Added bus number to the stream ID - Added stream ID not only to MSI-X, but also to plain MSI. Some common code was made into msi_send_message() function. Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-05-31acpi: Simplify printing to dynamic stringMarkus Armbruster
build_append_namestringv() and aml_string() first calculate the resulting string's length with vsnprintf(NULL, ...), then allocate, then print for real. Simply use g_strdup_vprintf() or g_vasprintf() instead. Signed-off-by: Markus Armbruster <armbru@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: John Snow <jsnow@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2015-05-31i386: drop FDC in pc-q35-2.4+ if neither it nor floppy drives are wantedLaszlo Ersek
It is Very annoying to carry forward an outdatEd coNtroller with a mOdern Machine type. Hence, let us not instantiate the FDC when all of the following apply: - the machine type is pc-q35-2.4 or later, - "-device isa-fdc" is not passed on the command line (nor in the config file), - no "-drive if=floppy,..." is requested. Cc: Markus Armbruster <armbru@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: John Snow <jsnow@redhat.com> Cc: "Gabriel L. Somlo" <gsomlo@gmail.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: qemu-block@nongnu.org Suggested-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Laszlo Ersek <lersek@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2015-05-31i386/pc_q35: don't insist on board FDC if there's no default floppyLaszlo Ersek
The "no_floppy = 1" machine class setting causes "default_floppy" in main() to become zero. Consequently, default_drive() will not call drive_add() and drive_new() for IF_FLOPPY, index=0, meaning that no default floppy drive will be created for the virtual machine. In that case, board code should also not insist on the creation of the board-default FDC. The board-default FDC will still be created if the user requests a floppy drive with "-drive if=floppy". Additionally, separate FDCs can be specified manually with "-device isa-fdc". They allow the -device isa-fdc,driveA=... syntax that is more flexible than the one required by the board-default FDC: -global isa-fdc.driveA=... This patch doesn't change the behavior observably, as all Q35 machine types have "no_floppy = 0". Cc: Markus Armbruster <armbru@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: John Snow <jsnow@redhat.com> Cc: "Gabriel L. Somlo" <gsomlo@gmail.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: qemu-block@nongnu.org Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2015-05-31i386/pc: '-drive if=floppy' should imply a board-default FDCLaszlo Ersek
Even if board code decides not to request the creation of the FDC (keyed off board-level factors, to be determined later), we should create the FDC nevertheless if the user passes '-drive if=floppy' on the command line. Otherwise '-drive if=floppy' would break without explicit '-device isa-fdc' on such boards. Cc: Markus Armbruster <armbru@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: John Snow <jsnow@redhat.com> Cc: "Gabriel L. Somlo" <gsomlo@gmail.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: qemu-block@nongnu.org Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2015-05-31i386/pc: pc_basic_device_init(): delegate FDC creation requestLaszlo Ersek
This patch introduces no observable change, but it allows the callers of pc_basic_device_init(), ie. pc_init1() and pc_q35_init(), to request (or not request) the creation of the FDC explicitly. At the moment both callers pass constant create_fdctrl=true (hence no observable change). Assuming a board passes create_fdctrl=false, "floppy" will be NULL on output, and (beyond the FDC not being created) that NULL will be passed on to pc_cmos_init(). Luckily, pc_cmos_init() already handles that case. Cc: Markus Armbruster <armbru@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Cc: John Snow <jsnow@redhat.com> Cc: "Gabriel L. Somlo" <gsomlo@gmail.com> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Cc: qemu-block@nongnu.org Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2015-05-31virtio: increase the queue limit to 1024Jason Wang
Increase the queue limit to 1024. But virtio-ccw and s390-virtio won't support this, this is done through failing device_plugged() for those two transports if the number of virtqueues is greater than 64. Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-05-31virtio: rename VIRTIO_PCI_QUEUE_MAX to VIRTIO_QUEUE_MAXJason Wang
VIRTIO_PCI_QUEUE_MAX is not only used for pci, so rename it be generic. Cc: Amit Shah <amit.shah@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-05-31virtio-s390: introduce virtio_s390_device_plugged()Jason Wang
This patch introduce a virtio-s390 specific device_plugged() function and doing the number of virtqueue validation inside. Cc: Alexander Graf <agraf@suse.de> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-05-31virtio-s390: introduce virito s390 queue limitJason Wang
Cc: Alexander Graf <agraf@suse.de> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-05-31virtio-ccw: validate the number of queues against bus limitationJason Wang
Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Richard Henderson <rth@twiddle.net> Cc: Alexander Graf <agraf@suse.de> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-05-31virtio-ccw: introduce ccw specific queue limitJason Wang
Cc: Alexander Graf <agraf@suse.de> Cc: Cornelia Huck <cornelia.huck@de.ibm.com> Cc: Christian Borntraeger <borntraeger@de.ibm.com> Cc: Richard Henderson <rth@twiddle.net> Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2015-05-31virtio: introduce virtio_get_num_queues()Jason Wang
This patch introduces virtio_get_num_queues() which iterates the vqs array and return the number of virtqueues used by device. Signed-off-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-26 12:57:35 +0000