aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-12-18Make USB hid devices self-poweredRiku Voipio
Simplifies power budget negotiation. Signed-off-by: Riku Voipio <riku.voipio@nokia.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-18Give a error when running out of iomem areas.Riku Voipio
The limit of iomem areas is quite low. Without the debug print, it is quite hard to figure out why more devices are not getting registered. Signed-off-by: Riku Voipio <riku.voipio@nokia.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-18fix networking on win32 hostJuha Riihimäki
At least under some mingw compilers slirp networking fails without declaring these fields packed. From: Juha Riihimäki <juha.riihimaki@nokia.com> Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com> Signed-off-by: Riku Voipio <riku.voipio@nokia.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-18fix pidfile option to work in WIN32Juha Riihimäki
Explicit read/write locking pidfile under WIN32 is bit extreme nobody get the chance to read the pidfile. Convert to a write-only lock. Also, creating pidfile was disabled along with daemonize under WIN32. Enable it, but do not enable daemon support which doesn't exist under WIN32 atm. From: Juha Riihimäki <juha.riihimaki@nokia.com> Signed-off-by: Juha Riihimäki <juha.riihimaki@nokia.com> Signed-off-by: Riku Voipio <riku.voipio@nokia.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-18Fix win32 log file locationJuha Riihimäki
/tmp doesn't exist under win32. Ease the pain of win32 development slightly. From: Juha Riihimäki <juha.riihimaki@nokia.com> Signed-off-by: Riku Voipio <riku.voipio@nokia.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-18Update SeaBIOS to include PCI based option rom loadingAnthony Liguori
Also remove pcbios from the tree. It will no longer work. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18roms: remove option rom packing logicGerd Hoffmann
Now that we load the option roms via fw_cfg, we can stop copying them to the 0xc000 -> 0xe000. The patch does just that. Also the rom loader gets simplified as all remaining users of the rom loader load the bits at a fixed address so the packing and aligning logic can go away. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18roms: use new fw_cfg file xfer support.Gerd Hoffmann
roms: use fw_cfg for vgabios and option rom loading, additionally to deploying them the traditional way (copy to 0xc0000 -> 0xe0000 range). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18fw_cfg: add API for file transfer.Gerd Hoffmann
This patch adds a file transfer interface to fw_cfg. Intended to be used for passing non-pci option roms and vgabios to seabios. Namespace is modeled after the existing cbfs filesystem support in seabios. Reading the new FW_CFG_FILE_DIR entry returns a file list. Fields there are in network byte order (aka bigendian). aliguori: fix fw_cfg.h for multiboot.bin, add proper fw_cfg.h declarations, quiet fprintf() in fw_cfg.c Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18fw_cfg: make calls typesafeGerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18pci romfiles: add property, add default to PCIDeviceInfoGerd Hoffmann
This patch adds a romfile property to the pci bus. It allows to specify a romfile to load into the rom bar of the pci device. The default value comes from a new field in PCIDeviceInfo. The property allows to change the file and also to disable the rom loading using an empty string. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18Support PCI based option rom loadingAnthony Liguori
Currently, we preload option roms into the option rom space in memory. This prevents DDIM from functioning correctly which severely limits the number of roms we can support. This patch introduces a pci_add_option_rom() which registers the PCI_ROM_ADDRESS bar which points to our option rom. It also converts over the cirrus vga adapter, the rtl8139, virtio, and the e1000 to use this new mechanism. The result is that PXE boot functions even with three unique types of cards. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18Fix backcompat for hotplug of SCSI controllersDaniel P. Berrange
SCSI controllers have no trouble existing without any attached disks. This could be achieved with the (legacy) monitor syntax pci_add pci_addr=auto storage if=scsi This is now denied with scsi requires a backing file/device. failed to add if=scsi There is no need for this denial and it breaks compatability with existing QEMU usage, so remove the check for presence of a drive. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18fdc: fix migration from 0.11Juan Quintela
0.11 uses as instance ide io_base, get it back Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18Revert "fdc: fix vmstate variable passed"Juan Quintela
Floppy used the io_base address to register savevm region. This reverts commit 2966b390d0f7cd5e5b971290fcc20685de374228. Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18monitor: Accept input only byte-wiseJan Kiszka
This allows to suspend command interpretation and execution synchronously, e.g. during migration. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18Revert "kvm: x86: Save/restore exception_index"Anthony Liguori
This reverts commit ebbc8a3d8e76d0402f8a08c10c0f32e24715d41d. As suggested by Jan Kiszka, "It was obsoleted by d1793b836f8f123b961c613de1bb1c0c185c84cc and now saves/restores a useless field." Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18vmware: increase cursor buffer size.Dave Airlie
The cursor pixmap size we calculate later ends up being 4096 dwords long by the looks of it. This boots an F12 LiveCD now. Signed-off-by: Dave Airlie <airlied@linux.ie> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18VMware VGA: Only enable dirty log tracking when fifo is disabledAnthony Liguori
This patch enables dirty log tracking whenever it's needed and disables it when it is not. We unconditionally enable dirty log tracking on reset, restart dirty log tracking when PCI IO regions are remapped, and disable/enable it based on commands from the guest. Rebased-by: Dave Airlie <airlied@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18Fix VMware VGA depth computationAnthony Liguori
VMware VGA requires that the depth presented to the guest is the same as the DisplaySurface that it renders to. This is because it performs a very simple memcpy() to blit from one surface to another. We currently hardcode a 24-bit depth. The surface allocator for SDL may, and usually will, allocate a surface with a different depth causing screen corruption. This changes the code to allocate the DisplaySurface before initializing the device which allows the depth of the DisplaySurface to be used instead of hardcoding something. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18Make sure to enable dirty log tracking for VMware VGAAnthony Liguori
This is needed for VMware VGA to work properly under KVM. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18Make sure to enable dirty tracking of VBE vram mappingAnthony Liguori
Apparently, VBE maps the VGA vram to a fixed physical location. KVM requires that all mappings of the VGA vram have dirty tracking enabled on them. Any access to the VGA vram through the VBE mapping currently fails to result in dirty page tracking updates causing a black screen. This is the true root cause of VMware VGA not working correctly under KVM and likely also an issue with some of the std-vga black screen issues too. Cirrus does not enable VBE so it would not be a problem when using Cirrus. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> Rebased-by: Dave Airlie <airlied@redhat.com>
2009-12-18vmware: setup PCI BAR 2 for FIFO as per vmware specDave Airlie
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18qdev: improve property error reporting.Gerd Hoffmann
Add a error message in case we fail to parse a qdev property. Also make qemu not abort() in case setting a global property can't be set. This used to be a clear programming error. The introduction of the -global switch changed that though, so better exit instead (after printing the new error message). Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18fix vga names in default_listGerd Hoffmann
Fix mismerge between 64465297 and 556cd098. Cc: Markus Armbruster <armbru@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18usb-host: check mon before using it.Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18usb-net: use qdev for -usbdeviceGerd Hoffmann
Rebased to master, adapted to device renaming by armbru, no other changes. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18Check rom_load_all() return value.Gerd Hoffmann
Check rom_load_all() return value. Also don't make option rom loading failure fatal. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18defaults: update device_list[]Gerd Hoffmann
Add isa-fdc (disables default_floppy). Add ide-drive (disables default_cdrom). Also walk the -global QemuOpts, so we'll catch -global isa-fdc.drive{A,B}=<name> too. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18defaults: split default_driveGerd Hoffmann
Split default_drive into default_{floppy,cdrom,sdcard}. Also add QEMUMachine flags to disable them per machine. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18monitor: Catch printing to non-existent monitorLuiz Capitulino
The monitor_vprintf() function now touches the 'mon' pointer before calling monitor_puts(), this causes block migration to segfault as its functions call monitor_printf() with a NULL 'mon'. To fix the problem this commit moves the 'mon' NULL check from monitor_puts() to monitor_vprintf(). This can potentially hide bugs, but for some reason this has been the behavior for a long time. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18monitor: Avoid readline functions in QMPLuiz Capitulino
The monitor_read_command() function is readline specific and should only be used when readline is available. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18monitor: do_balloon(): Check for errorsLuiz Capitulino
do_balloon() should check for ballooning availability as do_info_balloon() does. Noted by Daniel P. Berrange <berrange@redhat.com>. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18monitor: Use 'device' in ejectLuiz Capitulino
Monitor's eject command uses 'filename' for the device name argument, but 'device' is a better name. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18QDict: Fix size updateLuiz Capitulino
Key replacement should not update the dictionary's size. This commit also adds a test for the bug. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18qdev: Improve uni-north device namesMarkus Armbruster
Switch to the names suggested by Blue Swirl. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18Avoid permanently disabled QEMU monitor when UNIX migration failsDaniel P. Berrange
If a UNIX migration command is attempt to a UNIX socket which does not exist, then the monitor is suspended, but never resumed. This prevents any further use of the monitor * migration-unix.c: Only call migrate_fd_monitor_suspend() once connected to the UNIX socket. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18Fix loading of ELF multiboot kernelsKevin Wolf
The multiboot implementation assumed that there is only one program header (which contains the entry point) and that the entry point is at the start of the code. This doesn't hold true generally and caused too little data to be loaded. Fix the loading code to pass the whole loaded data to the Multiboot Option ROM. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18Revert "Rename DriveInfo.onerror to on_write_error" (fix mismerge)Kevin Wolf
Part of the first patch of the -drive rerror series has been merged once more on top of the rest of the series. This effectively disables the rerror option and always goes with the default value. Reverting the commit re-enables the option. This reverts commit fc072ec4df0996682dfbff6c735e2bbc0d93132f. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18qemu-io: Fix memory leakKevin Wolf
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18Fix thinko in linuxboot.SPaolo Bonzini
The %gs segment that was used was not matching the comments. I just moved the GDT descriptor on the stack instead. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18target-i386: Fix evaluation of DR7 registerJan Kiszka
hw_breakpoint_type and hw_breakpoint_len used the wrong index multiplier to extract type and len. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18kvm: x86: Use separate exception_injected CPUState fieldJan Kiszka
Marcelo correctly remarked that there are usage conflicts between QEMU core code and KVM /wrt exception_index. So spend a separate field and also save/restore it properly. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18vnc: hextile: do not generate ForegroundSpecified and SubrectsColoured tilesAnthony Liguori
This violates the RFB specification (section 6.6.4). It happens to work with most clients but it's still wrong. Reported-by: Yaniv Kaul <ykaul@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18Revert "pci: interrupt disable bit support"Anthony Liguori
This reverts commit 0ea5709a32085f7d14901a09d12bd35f9b267607. Per discussion with Michael Tsirkin, this is too risky for 0.12 Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-18S390: Bail out without KVMAlexander Graf
Currently only the S390 KVM target works. To keep users from accidently not using KVM, let's not even initialize the machine when KVM is not used. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-18S390: Don't tell guest we're updating config spaceAlexander Graf
Currently we always set the "config space changed" bit to 1 when triggering any virtio interrupt. While that worked in 2.6.27, newer kernels interpret that value as "only the config space changed and nothing else happened". Since we usually trigger interrupts to tell the guest that something did happen, we just not tell it the config space changed for now until we implement the correct callback for that. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-18add default virtcon initializationAlexander Graf
When going through the default devices, we don't initialize the virtio console, unless we're doing -nographic. I suppose that's just a leftover from the recent code restructuring, so let's put it in. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-18S390: Loop through virtio console devicesAlexander Graf
We used to always create one single virtio console device. This breaks when either zero of multiple virtio console devices are requested, so let's use the same code as on x86. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-18target-s390: Fail on unknown instructionsAlexander Graf
We were being a bit too nice and didn't give the guest an invalid instruction interrupt. While that works, it's not exactly the fastest thing to do, since now the guest doesn't know that we're not really implementing that instruction, so it continues doing it. We run into this with the set_page_unstable hint instruction. So let's bail out in these cases. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-01 04:07:47 +0000