aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-02-13hw/pci-bridge: fix pcie root port's IO hints capabilityMarcel Apfelbaum
The gen_pcie_root_port mem-reserve and pref32-reserve properties are defined as size (so uint64_t), but passed as uint32_t when building the 'IO hints' vendor specific capability. Passing 4G (or more) gets truncated and passed as a zero reservation. Is not a huge issue since the guest firmware will always compare the hints with the default value and take the maximum. Fix it by passing the values as uint64_t and failing to init the gen_pcie_root_port id invalid values are used. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-13libvhost-user: Support across-memory-boundary accessYongji Xie
The sg list/indirect descriptor table may be contigious in GPA but not in HVA address space. But libvhost-user wasn't aware of that. This would cause out-of-bounds access. Even a malicious guest could use it to get information from the vhost-user backend. Introduce a plen parameter in vu_gpa_to_va() so we can handle this case, returning the actual mapped length. Signed-off-by: Yongji Xie <xieyongji@baidu.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Maxime Coquelin <maxime.coquelin@redhat.com>
2018-02-13libvhost-user: Fix resource leakYongji Xie
Free the mmaped memory when we need to mmap new memory space on vu_set_mem_table_exec() and vu_set_log_base_exec() to avoid memory leak. Also close the corresponding fd after mmap() on vu_set_log_base_exec() to avoid fd leak. Signed-off-by: Yongji Xie <xieyongji@baidu.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
2018-02-13virtio-balloon: unref the memory region before continuingTiwei Bie
Signed-off-by: Tiwei Bie <tiwei.bie@intel.com> Cc: qemu-stable@nongnu.org Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-08pci: removed the is_express field since a uniform interface was insertedYoni Bettan
according to Eduardo Habkost's commit fd3b02c889 all PCIEs now implement INTERFACE_PCIE_DEVICE so we don't need is_express field anymore. Devices that implements only INTERFACE_PCIE_DEVICE (is_express == 1) or devices that implements only INTERFACE_CONVENTIONAL_PCI_DEVICE (is_express == 0) where not affected by the change. The only devices that were affected are those that are hybrid and also had (is_express == 1) - therefor only: - hw/vfio/pci.c - hw/usb/hcd-xhci.c - hw/xen/xen_pt.c For those 3 I made sure that QEMU_PCI_CAP_EXPRESS is on in instance_init() Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Signed-off-by: Yoni Bettan <ybettan@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-08virtio-blk: enable multiple vectors when using multiple I/O queuesChangpeng Liu
Currently virtio-pci driver hardcoded 2 vectors for virtio-blk device, for multiple I/O queues scenario, all the I/O queues will share one interrupt vector, while here, enable multiple vectors according to the number of I/O queues. Signed-off-by: Changpeng Liu <changpeng.liu@intel.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-08pci/bus: let it has higher migration priorityPeter Xu
In the past, we prioritized IOMMU migration so that we have such a priority order: IOMMU > PCI Devices When migrating a guest with both vIOMMU and a pcie-root-port, we'll always migrate vIOMMU first, since pci buses will be seen to have the same priority of general PCI devices. That's problematic. The thing is that PCI bus number information is stored in the root port, and that is needed by vIOMMU during post_load(), e.g., to figure out context entry for a device. If we don't have correct bus numbers for devices, we won't be able to recover device state of the DMAR memory regions, and things will be messed up. So let's boost the PCIe root ports to be even with higher priority: PCIe Root Port > IOMMU > PCI Devices A smoke test shows that this patch fixes bug 1538953. Also, apply this rule to all the PCI bus/bridge devices: ioh3420, xio3130_downstream, xio3130_upstream, pcie_pci_bridge, pci-pci bridge, i82801b11. I noted that we set pcie_pci_bridge_dev_vmstate twice. Clean that up together. CC: Alex Williamson <alex.williamson@redhat.com> CC: Marcel Apfelbaum <marcel@redhat.com> CC: Michael S. Tsirkin <mst@redhat.com> CC: Dr. David Alan Gilbert <dgilbert@redhat.com> CC: Juan Quintela <quintela@redhat.com> CC: Laurent Vivier <lvivier@redhat.com> Bug: https://bugzilla.redhat.com/show_bug.cgi?id=1538953 Reported-by: Maxime Coquelin <maxime.coquelin@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-08pci-bridge/i82801b11: clear bridge registers on platform resetLaszlo Ersek
The "i82801b11-bridge" device model is a descendant of "base-pci-bridge" (TYPE_PCI_BRIDGE). However, unlike other similar devices, such as - pci-bridge, - pcie-pci-bridge, - PCIE Root Port, - xio3130 switch upstream and downstream ports, - dec-21154-p2p-bridge, - pbm-bridge, - xilinx-pcie-root, "i82801b11-bridge" does not clear the bridge specific registers at platform reset. This is a problem because devices on "i82801b11-bridge" continue to respond to config space cycles after platform reset, when addressed with the bus number that was previously programmed into the secondary bus number register of "i82801b11-bridge". This error breaks OVMF's search for extra (PXB) root buses, for example. The device class reset method for "i82801b11-bridge" is currently NULL; set it directly to pci_bridge_reset(), like the last three bridge models in the above listing do. Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Marcel Apfelbaum <marcel@redhat.com> Cc: qemu-stable@nongnu.org Ref: https://bugzilla.redhat.com/show_bug.cgi?id=1541839 Signed-off-by: Laszlo Ersek <lersek@redhat.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-08vhost: Move log_dirty checkDr. David Alan Gilbert
Move the log_dirty check into vhost_section. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-08vhost: Merge and delete unused callbacksDr. David Alan Gilbert
Now that the olf vhost_set_memory code is gone, the _nop and _add callbacks are identical and can be merged. The _del callback is no longer needed. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-08vhost: Clean out old vhost_set_memory and friendsDr. David Alan Gilbert
Remove the old update mechanism, vhost_set_memory, and the functions and flags it used. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-08vhost: Regenerate region list from changed sections listDr. David Alan Gilbert
Compare the sections list that's just been generated, and if it's different from the old one regenerate the region list. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com>
2018-02-08vhost: Merge sections added to temporary listDr. David Alan Gilbert
As sections are reported by the listener to the _nop and _add methods, add them to the temporary section list but now merge them with the previous section if the new one abuts and the backend allows. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-08vhost: Simplify ring verification checksDr. David Alan Gilbert
vhost_verify_ring_mappings() were used to verify that rings are still accessible and related memory hasn't been moved after flatview is updated. It was doing checks by mapping ring's GPA+len and checking that HVA hadn't changed with new memory map. To avoid maybe expensive mapping call, we were identifying address range that changed and were doing mapping only if ring was in changed range. However it's not neccessary to perform ring's GPA mapping as we already have its current HVA and all we need is to verify that ring's GPA translates to the same HVA in updated flatview. This will allow the following patches to simplify the range comparison that was previously needed to avoid expensive verify_ring_mapping calls. Signed-off-by: Igor Mammedov <imammedo@redhat.com> with modifications by: Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-08vhost: Build temporary section list and deref after commitDr. David Alan Gilbert
Igor spotted that there's a race, where a region that's unref'd in a _del callback might be free'd before the set_mem_table call in the _commit callback, and thus the vhost might end up using free memory. Fix this by building a complete temporary sections list, ref'ing every section (during add and nop) and then unref'ing the whole list right at the end of commit. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-08virtio: improve virtio devices initialization timeGal Hammer
The loading time of a VM is quite significant when its virtio devices use a large amount of virt-queues (e.g. a virtio-serial device with max_ports=511). Most of the time is spend in the creation of all the required event notifiers (ioeventfd and memory regions). This patch pack all the changes to the memory regions in a single memory transaction. Reported-by: Sitong Liu Reported-by: Xiaoling Gao Signed-off-by: Gal Hammer <ghammer@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Tested-by: Greg Kurz <groug@kaod.org>
2018-02-08virtio: remove event notifier cleanup call on de-assignGal Hammer
The virtio_bus_set_host_notifier function no longer calls event_notifier_cleanup when a event notifier is removed. The commit updates the code to match the new behavior and calls virtio_bus_cleanup_host_notifier after the notifier was de-assign and no longer in use. This change is a preparation to allow executing the virtio_bus_set_host_notifier function in a memory region transaction. Signed-off-by: Gal Hammer <ghammer@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Tested-by: Greg Kurz <groug@kaod.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-08Revert "vhost: add traces for memory listeners"Michael S. Tsirkin
This reverts commit 0750b060216de69ed1f14bc08181bf4ad27fc622. Follow up patches are reworking the memory listeners, the new mechanism will add its own set of traces. Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2018-02-08Merge remote-tracking branch 'remotes/famz/tags/staging-pull-request' into ↵Peter Maydell
staging # gpg: Signature made Thu 08 Feb 2018 01:29:22 GMT # gpg: using RSA key CA35624C6A9171C6 # gpg: Good signature from "Fam Zheng <famz@redhat.com>" # Primary key fingerprint: 5003 7CB7 9706 0F76 F021 AD56 CA35 624C 6A91 71C6 * remotes/famz/tags/staging-pull-request: docs: Add docs/devel/testing.rst qapi: Add NVMe driver options to the schema docs: Add section for NVMe VFIO driver block: Move NVMe constants to a separate header qemu-img: Map bench buffer block/nvme: Implement .bdrv_(un)register_buf block: Introduce buf register API block: Add VFIO based NVMe driver util: Introduce vfio helpers stubs: Add stubs for ram block API curl: convert to CoQueue coroutine-lock: make qemu_co_enter_next thread-safe coroutine-lock: convert CoQueue to use QemuLockable lockable: add QemuLockable test-coroutine: add simple CoMutex test docker: change Fedora base image to fedora:27 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-08Merge remote-tracking branch 'remotes/jnsnow/tags/bitmaps-pull-request' into ↵Peter Maydell
staging # gpg: Signature made Wed 07 Feb 2018 17:00:12 GMT # gpg: using RSA key 7DEF8106AAFC390E # gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" # Primary key fingerprint: FAEB 9711 A12C F475 812F 18F2 88A9 064D 1835 61EB # Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76 CBD0 7DEF 8106 AAFC 390E * remotes/jnsnow/tags/bitmaps-pull-request: hbitmap: fix missing restore count when finish deserialization Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-08docs: Add docs/devel/testing.rstFam Zheng
To make our efforts on QEMU testing easier to consume by contributors, let's add a document. For example, Patchew reports build errors on patches that should be relatively easy to reproduce with a few steps, and it is much nicer if there is such a documentation that it can refer to. This focuses on how to run existing tests and how to write new test cases, without going into the frameworks themselves. The VM based testing section is moved from tests/vm/README which now is a single line pointing to the new doc. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20180201022046.9425-1-famz@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2018-02-08qapi: Add NVMe driver options to the schemaFam Zheng
Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20180116060901.17413-10-famz@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2018-02-08docs: Add section for NVMe VFIO driverFam Zheng
Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20180116060901.17413-9-famz@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2018-02-08block: Move NVMe constants to a separate headerFam Zheng
Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20180116060901.17413-8-famz@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2018-02-08qemu-img: Map bench bufferFam Zheng
Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20180116060901.17413-7-famz@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2018-02-08block/nvme: Implement .bdrv_(un)register_bufFam Zheng
Forward these two calls to the IOVA manager. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20180116060901.17413-6-famz@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2018-02-08block: Introduce buf register APIFam Zheng
Allow block driver to map and unmap a buffer for later I/O, as a performance hint. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20180116060901.17413-5-famz@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2018-02-08block: Add VFIO based NVMe driverFam Zheng
This is a new protocol driver that exclusively opens a host NVMe controller through VFIO. It achieves better latency than linux-aio by completely bypassing host kernel vfs/block layer. $rw-$bs-$iodepth linux-aio nvme:// ---------------------------------------- randread-4k-1 10.5k 21.6k randread-512k-1 745 1591 randwrite-4k-1 30.7k 37.0k randwrite-512k-1 1945 1980 (unit: IOPS) The driver also integrates with the polling mechanism of iothread. This patch is co-authored by Paolo and me. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com> Message-Id: <20180116060901.17413-4-famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2018-02-08util: Introduce vfio helpersFam Zheng
This is a library to manage the host vfio interface, which could be used to implement userspace device driver code in QEMU such as NVMe or net controllers. Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20180116060901.17413-3-famz@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2018-02-08stubs: Add stubs for ram block APIFam Zheng
These functions will be wanted by block-obj-y but the actual definition is in obj-y, so stub them to keep the linker happy. Signed-off-by: Fam Zheng <famz@redhat.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20180110091846.10699-2-famz@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2018-02-08curl: convert to CoQueuePaolo Bonzini
Now that CoQueues can use a QemuMutex for thread-safety, there is no need for curl to roll its own coroutine queue. Coroutines can be placed directly on the queue instead of using a list of CURLAIOCBs. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20180203153935.8056-6-pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2018-02-08coroutine-lock: make qemu_co_enter_next thread-safePaolo Bonzini
qemu_co_queue_next does not need to release and re-acquire the mutex, because the queued coroutine does not run immediately. However, this does not hold for qemu_co_enter_next. Now that qemu_co_queue_wait can synchronize (via QemuLockable) with code that is not running in coroutine context, it's important that code using qemu_co_enter_next can easily use a standardized locking idiom. First of all, qemu_co_enter_next must use aio_co_wake to restart the coroutine. Second, the function gains a second argument, a QemuLockable*, and the comments of qemu_co_queue_next and qemu_co_queue_restart_all are adjusted to clarify the difference. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20180203153935.8056-5-pbonzini@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2018-02-08coroutine-lock: convert CoQueue to use QemuLockablePaolo Bonzini
There are cases in which a queued coroutine must be restarted from non-coroutine context (with qemu_co_enter_next). In this cases, qemu_co_enter_next also needs to be thread-safe, but it cannot use a CoMutex and so cannot qemu_co_queue_wait. Use QemuLockable so that the CoQueue can interchangeably use CoMutex or QemuMutex. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20180203153935.8056-4-pbonzini@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2018-02-08lockable: add QemuLockablePaolo Bonzini
QemuLockable is a polymorphic lock type that takes an object and knows which function to use for locking and unlocking. The implementation could use C11 _Generic, but since the support is not very widespread I am instead using __builtin_choose_expr and __builtin_types_compatible_p, which are already used by include/qemu/atomic.h. QemuLockable can be used to implement lock guards, or to pass around a lock in such a way that a function can release it and re-acquire it. The next patch will do this for CoQueue. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20180203153935.8056-3-pbonzini@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2018-02-08test-coroutine: add simple CoMutex testPaolo Bonzini
In preparation for adding a similar test using QemuLockable, add a very simple testcase that has two interleaved calls to lock and unlock. Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20180203153935.8056-2-pbonzini@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2018-02-08docker: change Fedora base image to fedora:27Paolo Bonzini
Using "fedora:latest" makes behavior different depending on when you actually pulled the image from the docker repository. In my case, the supposedly "latest" image was a Fedora 25 download from 8 months ago, and the new "test-debug" test was failing. Use "27" to improve reproducibility and make it clear when the image is obsolete. Cc: Fam Zheng <famz@redhat.com> Cc: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <1515755504-21341-1-git-send-email-pbonzini@redhat.com> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Fam Zheng <famz@redhat.com>
2018-02-07Merge remote-tracking branch 'remotes/jnsnow/tags/ide-pull-request' into stagingPeter Maydell
# gpg: Signature made Wed 07 Feb 2018 16:32:36 GMT # gpg: using RSA key 7DEF8106AAFC390E # gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>" # Primary key fingerprint: FAEB 9711 A12C F475 812F 18F2 88A9 064D 1835 61EB # Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76 CBD0 7DEF 8106 AAFC 390E * remotes/jnsnow/tags/ide-pull-request: ide-test: test trim requests Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-07Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into stagingPeter Maydell
* socket option parsing fix (Daniel) * SCSI fixes (Fam) * Readline double-free fix (Greg) * More HVF attribution fixes (Izik) * WHPX (Windows Hypervisor Platform Extensions) support (Justin) * POLLHUP handler (Klim) * ivshmem fixes (Ladi) * memfd memory backend (Marc-André) * improved error message (Marcelo) * Memory fixes (Peter Xu, Zhecheng) * Remove obsolete code and comments (Peter M.) * qdev API improvements (Philippe) * Add CONFIG_I2C switch (Thomas) # gpg: Signature made Wed 07 Feb 2018 15:24:08 GMT # gpg: using RSA key BFFBD25F78C7AE83 # gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" # gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" # Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1 # Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83 * remotes/bonzini/tags/for-upstream: (47 commits) Add the WHPX acceleration enlightenments Introduce the WHPX impl Add the WHPX vcpu API Add the Windows Hypervisor Platform accelerator. tests/test-filter-redirector: move close() tests: use memfd in vhost-user-test vhost-user-test: make read-guest-mem setup its own qemu tests: keep compiling failing vhost-user tests Add memfd based hostmem memfd: add hugetlbsize argument memfd: add hugetlb support memfd: add error argument, instead of perror() cpus: join thread when removing a vCPU cpus: hvf: unregister thread with RCU cpus: tcg: unregister thread with RCU, fix exiting of loop on unplug cpus: dummy: unregister thread with RCU, exit loop on unplug cpus: kvm: unregister thread with RCU cpus: hax: register/unregister thread with RCU, exit loop on unplug ivshmem: Disable irqfd on device reset ivshmem: Improve MSI irqfd error handling ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # cpus.c
2018-02-07hbitmap: fix missing restore count when finish deserializationLiang Li
The .count of HBitmap is forgot to set in function hbitmap_deserialize_finish, let's set it to the right value. Cc: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Cc: Fam Zheng <famz@redhat.com> Cc: Max Reitz <mreitz@redhat.com> Cc: John Snow <jsnow@redhat.com> Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Weiping Zhang <zhangweiping@didichuxing.com> Signed-off-by: Liang Li <liliangleo@didichuxing.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 20180118131308.GA2181@liangdeMacBook-Pro.local Signed-off-by: John Snow <jsnow@redhat.com>
2018-02-07Merge remote-tracking branch 'remotes/armbru/tags/pull-error-2018-02-06' ↵Peter Maydell
into staging Error reporting patches for 2018-02-06 # gpg: Signature made Tue 06 Feb 2018 19:48:30 GMT # gpg: using RSA key 3870B400EB918653 # gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" # gpg: aka "Markus Armbruster <armbru@pond.sub.org>" # Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653 * remotes/armbru/tags/pull-error-2018-02-06: tcg: Replace fprintf(stderr, "*\n" with error_report() hw/xen*: Replace fprintf(stderr, "*\n" with error_report() hw/sparc*: Replace fprintf(stderr, "*\n" with error_report() hw/sd: Replace fprintf(stderr, "*\n" with DPRINTF() hw/ppc: Replace fprintf(stderr, "*\n" with error_report() hw/pci*: Replace fprintf(stderr, "*\n" with error_report() hw/openrisc: Replace fprintf(stderr, "*\n" with error_report() hw/moxie: Replace fprintf(stderr, "*\n" with error_report() hw/mips: Replace fprintf(stderr, "*\n" with error_report() hw/lm32: Replace fprintf(stderr, "*\n" with error_report() hw/dma: Replace fprintf(stderr, "*\n" with error_report() hw/arm: Replace fprintf(stderr, "*\n" with error_report() audio: Replace AUDIO_FUNC with __func__ error: Improve documentation of error_append_hint() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-07ide-test: test trim requestsAnton Nefedov
Signed-off-by: Anton Nefedov <anton.nefedov@virtuozzo.com> Reviewed-by: John Snow <jsnow@redhat.com> Message-id: 1516611841-5526-1-git-send-email-anton.nefedov@virtuozzo.com Signed-off-by: John Snow <jsnow@redhat.com>
2018-02-07Merge remote-tracking branch 'remotes/awilliam/tags/vfio-update-20180206.0' ↵Peter Maydell
into staging VFIO updates 2018-02-06 - SPAPR in-kernel TCE accleration (Alexey Kardashevskiy) - MSI-X relocation (Alex Williamson) - Add missing platform mutex init (Eric Auger) - Redundant variable cleanup (Alexey Kardashevskiy) - Option to disable GeForce quirks (Alex Williamson) # gpg: Signature made Tue 06 Feb 2018 18:21:22 GMT # gpg: using RSA key 239B9B6E3BB08B22 # gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>" # gpg: aka "Alex Williamson <alex@shazbot.org>" # gpg: aka "Alex Williamson <alwillia@redhat.com>" # gpg: aka "Alex Williamson <alex.l.williamson@gmail.com>" # Primary key fingerprint: 42F6 C04E 540B D1A9 9E7B 8A90 239B 9B6E 3BB0 8B22 * remotes/awilliam/tags/vfio-update-20180206.0: vfio/pci: Add option to disable GeForce quirks vfio/common: Remove redundant copy of local variable hw/vfio/platform: Init the interrupt mutex vfio/pci: Allow relocating MSI-X MMIO qapi: Create DEFINE_PROP_OFF_AUTO_PCIBAR vfio/pci: Emulate BARs vfio/pci: Add base BAR MemoryRegion vfio/pci: Fixup VFIOMSIXInfo comment spapr/iommu: Enable in-kernel TCE acceleration via VFIO KVM device vfio/spapr: Use iommu memory region's get_attr() memory/iommu: Add get_attr() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2018-02-07Add the WHPX acceleration enlightenmentsJustin Terry (VM)
Implements the WHPX accelerator cpu enlightenments to actually use the whpx-all accelerator on Windows platforms. Signed-off-by: Justin Terry (VM) <juterry@microsoft.com> Message-Id: <1516655269-1785-5-git-send-email-juterry@microsoft.com> [Register/unregister VCPU thread with RCU. - Paolo] Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-07Introduce the WHPX implJustin Terry (VM)
Implements the Windows Hypervisor Platform accelerator (WHPX) target. Which acts as a hypervisor accelerator for QEMU on the Windows platform. This enables QEMU much greater speed over the emulated x86_64 path's that are taken on Windows today. 1. Adds support for vPartition management. 2. Adds support for vCPU management. 3. Adds support for MMIO/PortIO. 4. Registers the WHPX ACCEL_CLASS. Signed-off-by: Justin Terry (VM) <juterry@microsoft.com> Message-Id: <1516655269-1785-4-git-send-email-juterry@microsoft.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-07Add the WHPX vcpu APIJustin Terry (VM)
Adds support for the Windows Hypervisor Platform accelerator (WHPX) stubs and introduces the whpx.h sysemu API for managing the vcpu scheduling and management. Signed-off-by: Justin Terry (VM) <juterry@microsoft.com> Message-Id: <1516655269-1785-3-git-send-email-juterry@microsoft.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-07Add the Windows Hypervisor Platform accelerator.Justin Terry (VM)
Introduces the configure support for the new Windows Hypervisor Platform that allows for hypervisor acceleration from usermode components on the Windows platform. Signed-off-by: Justin Terry (VM) <juterry@microsoft.com> Message-Id: <1516655269-1785-2-git-send-email-juterry@microsoft.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-07tests/test-filter-redirector: move close()Klim Kireev
Since we have separate handler on POLLHUP, which drops data after closing the connection we need to fix this test, because it sends data and instantly close the socket creating race condition. In some cases on other end of socket client closes it faster than reads data. To prevent it I suggest to close socket after recieving. Signed-off-by: Klim Kireev <klim.kireev@virtuozzo.com> Message-Id: <20180201134831.17709-1-klim.kireev@virtuozzo.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-07tests: use memfd in vhost-user-testMarc-André Lureau
This will exercise the memfd memory backend and should generally be better for testing than memory-backend-file (thanks to anonymous files and sealing). If memfd is available, it is preferred. However, in order to check that file & memfd backends both work correctly, the read-guest-mem test is checked explicitly for each. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20180201132757.23063-8-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-07vhost-user-test: make read-guest-mem setup its own qemuMarc-André Lureau
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20180201132757.23063-7-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2018-02-07tests: keep compiling failing vhost-user testsMarc-André Lureau
Let's protect the failing tests under a QTEST_VHOST_USER_FIXME environment variable, so we keep compiling the tests and we can easily run them. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20180201132757.23063-6-marcandre.lureau@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-01 16:22:25 +0000