aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-07-12virtio-md-pci: Support unplug requests for compatible devicesDavid Hildenbrand
Let's support unplug requests for virtio-md-pci devices that provide a unplug_request_check() callback. We'll wire that up for virtio-mem-pci next. Message-ID: <20230711153445.514112-6-david@redhat.com> Tested-by: Mario Casquero <mcasquer@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com>
2023-07-12virtio-md-pci: Handle unplug of virtio based memory devicesDavid Hildenbrand
While we fence unplug requests from the outside, the VM can still trigger unplug of virtio based memory devices, for example, in Linux doing on a virtio-mem-pci device: # echo 0 > /sys/bus/pci/slots/3/power While doing that is not really expected to work without harming the guest OS (e.g., removing a virtio-mem device while it still provides memory), let's make sure that we properly handle it on the QEMU side. We'll add support for unplugging of virtio-mem devices in some configurations next. Message-ID: <20230711153445.514112-5-david@redhat.com> Tested-by: Mario Casquero <mcasquer@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com>
2023-07-12arm/virt: Use virtio-md-pci (un)plug functionsDavid Hildenbrand
Let's use our new helper functions. Note that virtio-pmem-pci is not enabled for arm and, therefore, not compiled in. Message-ID: <20230711153445.514112-4-david@redhat.com> Tested-by: Mario Casquero <mcasquer@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com>
2023-07-12pc: Factor out (un)plug handling of virtio-md-pci devicesDavid Hildenbrand
Let's factor out (un)plug handling, to be reused from arm/virt code. Provide stubs for the case that CONFIG_VIRTIO_MD is not selected because neither virtio-mem nor virtio-pmem is enabled. While this cannot currently happen for x86, it will be possible for arm/virt. Message-ID: <20230711153445.514112-3-david@redhat.com> Tested-by: Mario Casquero <mcasquer@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com>
2023-07-12virtio-md-pci: New parent type for virtio-mem-pci and virtio-pmem-pciDavid Hildenbrand
Let's add a new abstract "virtio memory device" type, and use it as parent class of virtio-mem-pci and virtio-pmem-pci. Message-ID: <20230711153445.514112-2-david@redhat.com> Tested-by: Mario Casquero <mcasquer@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com>
2023-07-12virtio-mem: Support "x-ignore-shared" migrationDavid Hildenbrand
To achieve desired "x-ignore-shared" functionality, we should not discard all RAM when realizing the device and not mess with preallocation/postcopy when loading device state. In essence, we should not touch RAM content. As "x-ignore-shared" gets set after realizing the device, we cannot rely on that. Let's simply skip discarding of RAM on incoming migration. Note that virtio_mem_post_load() will call virtio_mem_restore_unplugged() -- unless "x-ignore-shared" is set. So once migration finished we'll have a consistent state. The initial system reset will also not discard any RAM, because virtio_mem_unplug_all() will not call virtio_mem_unplug_all() when no memory is plugged (which is the case before loading the device state). Note that something like VM templating -- see commit b17fbbe55cba ("migration: allow private destination ram with x-ignore-shared") -- is currently incompatible with virtio-mem and ram_block_discard_range() will warn in case a private file mapping is supplied by virtio-mem. For VM templating with virtio-mem, it makes more sense to either (a) Create the template without the virtio-mem device and hotplug a virtio-mem device to the new VM instances using proper own memory backend. (b) Use a virtio-mem device that doesn't provide any memory in the template (requested-size=0) and use private anonymous memory. Message-ID: <20230706075612.67404-5-david@redhat.com> Tested-by: Mario Casquero <mcasquer@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com>
2023-07-12migration/ram: Expose ramblock_is_ignored() as migrate_ram_is_ignored()David Hildenbrand
virtio-mem wants to know whether it should not mess with the RAMBlock content (e.g., discard RAM, preallocate memory) on incoming migration. So let's expose that function as migrate_ram_is_ignored() in migration/misc.h Message-ID: <20230706075612.67404-4-david@redhat.com> Acked-by: Peter Xu <peterx@redhat.com> Tested-by: Mario Casquero <mcasquer@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com>
2023-07-12virtio-mem: Skip most of virtio_mem_unplug_all() without plugged memoryDavid Hildenbrand
Already when starting QEMU we perform one system reset that ends up triggering virtio_mem_unplug_all() with no actual memory plugged yet. That, in turn will trigger ram_block_discard_range() and perform some other actions that are not required in that case. Let's optimize virtio_mem_unplug_all() for the case that no memory is plugged. This will be beneficial for x-ignore-shared support as well. Message-ID: <20230706075612.67404-3-david@redhat.com> Tested-by: Mario Casquero <mcasquer@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com>
2023-07-12softmmu/physmem: Warn with ram_block_discard_range() on MAP_PRIVATE file mappingDavid Hildenbrand
ram_block_discard_range() cannot possibly do the right thing in MAP_PRIVATE file mappings in the general case. To achieve the documented semantics, we also have to punch a hole into the file, possibly messing with other MAP_PRIVATE/MAP_SHARED mappings of such a file. For example, using VM templating -- see commit b17fbbe55cba ("migration: allow private destination ram with x-ignore-shared") -- in combination with any mechanism that relies on discarding of RAM is problematic. This includes: * Postcopy live migration * virtio-balloon inflation/deflation or free-page-reporting * virtio-mem So at least warn that there is something possibly dangerous is going on when using ram_block_discard_range() in these cases. Message-ID: <20230706075612.67404-2-david@redhat.com> Acked-by: Peter Xu <peterx@redhat.com> Tested-by: Mario Casquero <mcasquer@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com>
2023-07-12memory-device: Track used region size in DeviceMemoryStateDavid Hildenbrand
Let's avoid iterating over all devices and simply track it in the DeviceMemoryState. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20230623124553.400585-11-david@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com>
2023-07-12memory-device: Refactor memory_device_pre_plug()David Hildenbrand
Let's move memory_device_check_addable() and basic checks out of memory_device_get_free_addr() directly into memory_device_pre_plug(). Separating basic checks from address assignment is cleaner and prepares for further changes. As all memory device users now use memory_devices_init(), and that function enforces that the size is 0, we can drop the check for an empty region. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20230623124553.400585-10-david@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com>
2023-07-12hw/i386/pc: Remove PC_MACHINE_DEVMEM_REGION_SIZEDavid Hildenbrand
There are no remaining users in the tree. Libvirt never used that property and a quick internet search revealed no other users. Further, we renamed that property already in commit f2ffbe2b7dd0 ("pc: rename "hotplug memory" terminology to "device memory"") without anybody complaining. So let's just get rid of it. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Eduardo Habkost <eduardo@habkost.net> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20230623124553.400585-9-david@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com>
2023-07-12hw/i386/acpi-build: Rely on machine->device_memory when building SRATDavid Hildenbrand
We're already looking at machine->device_memory when calling build_srat_memory(), so let's simply avoid going via PC_MACHINE_DEVMEM_REGION_SIZE to get the size and rely on machine->device_memory directly. Once machine->device_memory is set, we know that the size > 0. The code now looks much more similar the hw/arm/virt-acpi-build.c variant. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Eduardo Habkost <eduardo@habkost.net> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20230623124553.400585-8-david@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com>
2023-07-12hw/i386/pc: Use machine_memory_devices_init()David Hildenbrand
Let's use our new helper and stop always allocating ms->device_memory. Once allcoated, we're sure that the size > 0 and that the base was initialized. Adjust the code in pc_memory_init() to check for machine->device_memory instead of pcmc->has_reserved_memory and machine->device_memory->base. Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Richard Henderson <richard.henderson@linaro.org> Cc: Eduardo Habkost <eduardo@habkost.net> Cc: "Michael S. Tsirkin" <mst@redhat.com> Cc: Marcel Apfelbaum <marcel.apfelbaum@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20230623124553.400585-7-david@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com>
2023-07-12hw/loongarch/virt: Use machine_memory_devices_init()David Hildenbrand
Let's use our new helper. While at it, use VIRT_HIGHMEM_BASE. Cc: Xiaojuan Yang <yangxiaojuan@loongson.cn> Cc: Song Gao <gaosong@loongson.cn> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Song Gao <gaosong@loongson.cn> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20230623124553.400585-6-david@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com>
2023-07-12hw/ppc/spapr: Use machine_memory_devices_init()David Hildenbrand
Let's use our new helper and stop always allocating ms->device_memory. There is no difference in common memory-device code anymore between ms->device_memory being NULL or the size being 0. So we only have to teach spapr code that ms->device_memory isn't always around. We can now modify two maxram_size checks to rely on ms->device_memory for detecting whether we have memory devices. Cc: Daniel Henrique Barboza <danielhb413@gmail.com> Cc: "Cédric Le Goater" <clg@kaod.org> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Greg Kurz <groug@kaod.org> Cc: Harsh Prateek Bora <harshpb@linux.ibm.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20230623124553.400585-5-david@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com>
2023-07-12hw/arm/virt: Use machine_memory_devices_init()David Hildenbrand
Let's use our new helper. We'll add the subregion to system RAM now earlier. That shouldn't matter, because the system RAM memory region should already be alive at that point. Cc: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20230623124553.400585-4-david@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com>
2023-07-12memory-device: Introduce machine_memory_devices_init()David Hildenbrand
Let's intrduce a new helper that we will use to replace existing memory device setup code during machine initialization. We'll enforce that the size has to be > 0. Once all machines were converted, we'll only allocate ms->device_memory if the size > 0. Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20230623124553.400585-3-david@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com>
2023-07-12memory-device: Unify enabled vs. supported error messagesDavid Hildenbrand
Let's unify the error messages, such that we can simply stop allocating ms->device_memory if the size would be 0 (and there are no memory devices ever). The case of "not supported by the machine" should barely pop up either way: if the machine doesn't support memory devices, it usually doesn't call the pre_plug handler ... Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: David Hildenbrand <david@redhat.com> Message-Id: <20230623124553.400585-2-david@redhat.com> Signed-off-by: David Hildenbrand <david@redhat.com>
2023-07-11configure: Fix cross-building for RISCV host (v5)Philippe Mathieu-Daudé
Update $linux_arch to keep using the shared linux-headers/asm-riscv/ include path. Fixes: e3e477c3bca0 ("configure: Fix cross-building for RISCV host") Reported-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> [rth: Missed v5, so now applying the diff between v4 and v5.] Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-07-11configure: Fix cross-building for RISCV hostPhilippe Mathieu-Daudé
While when building on native Linux the host architecture is reported as "riscv32" or "riscv64": Host machine cpu family: riscv64 Host machine cpu: riscv64 Found pkg-config: /usr/bin/pkg-config (0.29.2) Since commit ba0e733362 ("configure: Merge riscv32 and riscv64 host architectures"), when cross-compiling it is detected as "riscv". Meson handles the cross-detection but displays a warning: WARNING: Unknown CPU family riscv, please report this at https://github.com/mesonbuild/meson/issues/new Host machine cpu family: riscv Host machine cpu: riscv Target machine cpu family: riscv Target machine cpu: riscv Found pkg-config: /usr/bin/riscv64-linux-gnu-pkg-config (1.8.1) Now since commit 278c1bcef5 ("target/riscv: Only unify 'riscv32/64' -> 'riscv' for host cpu in meson") Meson expects the cpu to be in [riscv32, riscv64]. So when cross-building (for example on our cross-riscv64-system Gitlab-CI job) we get: WARNING: Unknown CPU family riscv, please report this at https://github.com/mesonbuild/meson/issues/new Host machine cpu family: riscv Host machine cpu: riscv Target machine cpu family: riscv Target machine cpu: riscv ../meson.build:684:6: ERROR: Problem encountered: Unsupported CPU riscv, try --enable-tcg-interpreter Fix by partially revert commit ba0e733362 so when cross-building the ./configure script passes the proper host architecture to meson. Fixes: ba0e733362 ("configure: Merge riscv32 and riscv64 host architectures") Fixes: 278c1bcef5 ("target/riscv: Only unify 'riscv32/64' -> 'riscv' for host cpu in meson") Reported-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230711110619.56588-1-philmd@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-07-11Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu ↵Richard Henderson
into staging pc,pci,virtio: cleanups, fixes, features vhost-user-gpu: edid vhost-user-scmi device vhost-vdpa: _F_CTRL_RX and _F_CTRL_RX_EXTRA support for svq cleanups, fixes all over the place. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # -----BEGIN PGP SIGNATURE----- # # iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmSsjYMPHG1zdEByZWRo # YXQuY29tAAoJECgfDbjSjVRp2vYH/20u6TAMssE/UAJoUU0ypbJkbHjDqiqDeuZN # qDYazLUWIJTUbDnSfXAiRcdJuukEpEFcoHa9O6vgFE/SNod51IrvsJR9CbZxNmk6 # D+Px9dkMckDE/yb8f6hhcHsi7/1v04I0oSXmJTVYxWSKQhD4Km6x8Larqsh0u4yd # n6laZ+VK5H8sk6QvI5vMz+lYavACQVryiWV/GAigP21B0eQK79I5/N6y0q8/axD5 # cpeTzUF+m33SfLfyd7PPmibCQFYrHDwosynSnr3qnKusPRJt2FzWkzOiZgbtgE2L # UQ/S4sYTBy8dZJMc0wTywbs1bSwzNrkQ+uS0v74z9wCUYTgvQTA= # =RsOh # -----END PGP SIGNATURE----- # gpg: Signature made Tue 11 Jul 2023 12:00:19 AM BST # gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469 # gpg: issuer "mst@redhat.com" # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined] # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (66 commits) vdpa: Allow VIRTIO_NET_F_CTRL_RX_EXTRA in SVQ vdpa: Restore packet receive filtering state relative with _F_CTRL_RX_EXTRA feature vdpa: Allow VIRTIO_NET_F_CTRL_RX in SVQ vdpa: Avoid forwarding large CVQ command failures vdpa: Accessing CVQ header through its structure vhost: Fix false positive out-of-bounds vdpa: Restore packet receive filtering state relative with _F_CTRL_RX feature vdpa: Restore MAC address filtering state vdpa: Use iovec for vhost_vdpa_net_load_cmd() pcie: Specify 0 for ARI next function numbers pcie: Use common ARI next function number include/hw/virtio: document some more usage of notifiers include/hw/virtio: add kerneldoc for virtio_init include/hw/virtio: document virtio_notify_config hw/virtio: fix typo in VIRTIO_CONFIG_IRQ_IDX comments include/hw: document the device_class_set_parent_* fns include: attempt to document device_class_set_props vdpa: Fix possible use-after-free for VirtQueueElement pcie: Add hotplug detect state register to cmask virtio-iommu: Rework the traces in virtio_iommu_set_page_size_mask() ... Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-07-11Merge tag 'mips-20230710' of https://github.com/philmd/qemu into stagingRichard Henderson
MIPS patches queue - Use clock API & divider for cp0_timer to avoid rounding issue (Jiaxun) - Implement Loongson CSR instructions (Jiaxun) - Implement Ingenic MXU ASE v1 rev2 (Siarhei) - Enable GINVx support for I6400 and I6500 cores (Marcin) - Generalize PCI IDE controller models (Bernhard) # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCAAdFiEE+qvnXhKRciHc/Wuy4+MsLN6twN4FAmSsg5kACgkQ4+MsLN6t # wN6O4g/9GpirNnG1tizIEksI17PaAotgui2PYzml2nQLyQNmPs3lSfyDEfFpZLC6 # HGxglNjdvCgmIhRH1IuRKuJofp0r84NY+sktXjz2+As3opyjR66gVsSefWeupr7t # avZQQIBBOV3OYLzFkqjDpBflyKXz43MRW3r9ai4Dle/TwiE5GA1iKuQ6Rt55urtT # 045OdtFZTsIwTyg75pSXExAehOn5FQ4aqIODwfJYqvhkkVZ9lgWYSgUOsgDcGqPQ # eytpif6+m350Xme4BgqITMZkeIbyKcCcfU37JBqk/q6/gDDf18zSWpC7MNXea4ZR # so9ffZqms/xcIOfIO3uc4t9AZRHchiVjFHihCUKc0mBTzLy1QhQ4ybdQu3fUywaG # WziEFLrJ/qfWjixRxeDdBZamC2fSxYtcRNST7g+XttiMacvQC6aPFVfLDa+3Xjtt # TmIjx8oGdLB9BMrGMuHsOygfgi98eGbWQ2I5ZhzwBbJ7uFQdeTkMCswcAsVcj8pW # e7/ixw2e+SYFm0q9Z/QiZZ7LFDp/b3u7/ufXCUBX2r1gi7Xi+x60E6dm3Ge3XAsY # qSx9ZOlVNJlIs/ChP0KckHDMeFuCnRmNEvKC039syHWSy6VP8NO7fwwxK+XytyrK # aJMyPS97kVXuqriKZIGsV0KjLOz3neh0OdQTolPv1R5yb9tI6Xc= # =rtlE # -----END PGP SIGNATURE----- # gpg: Signature made Mon 10 Jul 2023 11:18:01 PM BST # gpg: using RSA key FAABE75E12917221DCFD6BB2E3E32C2CDEADC0DE # gpg: Good signature from "Philippe Mathieu-Daudé (F4BUG) <f4bug@amsat.org>" [full] * tag 'mips-20230710' of https://github.com/philmd/qemu: (44 commits) hw/ide/piix: Move registration of VMStateDescription to DeviceClass hw/ide/pci: Replace some magic numbers by constants hw/ide: Extract bmdma_status_writeb() hw/ide: Extract IDEBus assignment into bmdma_init() hw/isa/vt82c686: Remove via_isa_set_irq() hw/ide/via: Wire up IDE legacy interrupts in host device hw/ide/pci: Expose legacy interrupts as named GPIOs target/mips: enable GINVx support for I6400 and I6500 target/mips/mxu: Add Q8SAD instruction target/mips/mxu: Add S32SFL instruction target/mips/mxu: Add Q8MADL instruction target/mips/mxu: Add Q16SCOP instruction target/mips/mxu: Add Q8MAC Q8MACSU instructions target/mips/mxu: Add S32/D16/Q8- MOVZ/MOVN instructions target/mips/mxu: Add D32/Q16- SLLV/SLRV/SARV instructions target/mips/mxu: Add Q16SLL Q16SLR Q16SAR instructions target/mips/mxu: Add D32SLL D32SLR D32SAR instructions target/mips/mxu: Add D32SARL D32SARW instructions target/mips/mxu: Add S32ALN S32LUI insns target/mips/mxu: Add S32MUL S32MULU S32EXTR S32EXTRV insns ... Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
2023-07-10vdpa: Allow VIRTIO_NET_F_CTRL_RX_EXTRA in SVQHawkins Jiawei
Enable SVQ with VIRTIO_NET_F_CTRL_RX_EXTRA feature. Signed-off-by: Hawkins Jiawei <yin31149@gmail.com> Acked-by: Eugenio Pérez <eperezma@redhat.com> Message-Id: <15ecc49975f9b8d1316ed4296879564a18abf31e.1688797728.git.yin31149@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10vdpa: Restore packet receive filtering state relative with _F_CTRL_RX_EXTRA ↵Hawkins Jiawei
feature This patch refactors vhost_vdpa_net_load_rx() to restore the packet receive filtering state in relation to VIRTIO_NET_F_CTRL_RX_EXTRA feature at device's startup. Signed-off-by: Hawkins Jiawei <yin31149@gmail.com> Message-Id: <abddc477a476f756de6e3d24c0e9f7b21c99a4c1.1688797728.git.yin31149@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10vdpa: Allow VIRTIO_NET_F_CTRL_RX in SVQHawkins Jiawei
Enable SVQ with VIRTIO_NET_F_CTRL_RX feature. Signed-off-by: Hawkins Jiawei <yin31149@gmail.com> Acked-by: Eugenio Pérez <eperezma@redhat.com> Message-Id: <5d6173a6d7c4c514c98362b404c019f52d73b06c.1688743107.git.yin31149@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10vdpa: Avoid forwarding large CVQ command failuresHawkins Jiawei
Due to the size limitation of the out buffer sent to the vdpa device, which is determined by vhost_vdpa_net_cvq_cmd_len(), excessive CVQ command is truncated in QEMU. As a result, the vdpa device rejects this flawd CVQ command. However, the problem is that, the VIRTIO_NET_CTRL_MAC_TABLE_SET CVQ command has a variable length, which may exceed vhost_vdpa_net_cvq_cmd_len() if the guest sets more than `MAC_TABLE_ENTRIES` MAC addresses for the filter table. This patch solves this problem by following steps: * Increase the out buffer size to vhost_vdpa_net_cvq_cmd_page_len(), which represents the size of the buffer that is allocated and mmaped. This ensures that everything works correctly as long as the guest sets fewer than `(vhost_vdpa_net_cvq_cmd_page_len() - sizeof(struct virtio_net_ctrl_hdr) - 2 * sizeof(struct virtio_net_ctrl_mac)) / ETH_ALEN` MAC addresses. Considering the highly unlikely scenario for the guest setting more than that number of MAC addresses for the filter table, this should work fine for the majority of cases. * If the CVQ command exceeds vhost_vdpa_net_cvq_cmd_page_len(), instead of directly sending this CVQ command, QEMU should send a VIRTIO_NET_CTRL_RX_PROMISC CVQ command to vdpa device. Addtionally, a fake VIRTIO_NET_CTRL_MAC_TABLE_SET command including (`MAC_TABLE_ENTRIES` + 1) non-multicast MAC addresses and (`MAC_TABLE_ENTRIES` + 1) multicast MAC addresses should be provided to the device model. By doing so, the vdpa device turns promiscuous mode on, aligning with the VirtIO standard. The device model marks `n->mac_table.uni_overflow` and `n->mac_table.multi_overflow`, which aligns with the state of the vdpa device. Note that the bug cannot be triggered at the moment, since VIRTIO_NET_F_CTRL_RX feature is not enabled for SVQ. Fixes: 7a7f87e94c ("vdpa: Move command buffers map to start of net device") Signed-off-by: Hawkins Jiawei <yin31149@gmail.com> Message-Id: <267e15e4eed2d7aeb9887f193da99a13d22a2f1d.1688743107.git.yin31149@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10vdpa: Accessing CVQ header through its structureHawkins Jiawei
We can access the CVQ header through `struct virtio_net_ctrl_hdr`, instead of accessing it through a `uint8_t` pointer, which improves the code's readability and maintainability. Signed-off-by: Hawkins Jiawei <yin31149@gmail.com> Message-Id: <cd522e06a4371e9d6b8a1c1a86f90a92401d56e8.1688743107.git.yin31149@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10vhost: Fix false positive out-of-boundsHawkins Jiawei
QEMU uses vhost_svq_translate_addr() to translate addresses between the QEMU's virtual address and the SVQ IOVA. In order to validate this translation, QEMU checks whether the translated range falls within the mapped range. Yet the problem is that, the value of `needle_last`, which is calculated by `needle.translated_addr + iovec[i].iov_len`, should represent the exclusive boundary of the translated range, rather than the last inclusive addresses of the range. Consequently, QEMU fails the check when the translated range matches the size of the mapped range. This patch solves this problem by fixing the `needle_last` value to the last inclusive address of the translated range. Note that this bug cannot be triggered at the moment, because QEMU is unable to translate such a big range due to the truncation of the CVQ command in vhost_vdpa_net_handle_ctrl_avail(). Fixes: 34e3c94eda ("vdpa: Add custom IOTLB translations to SVQ") Signed-off-by: Hawkins Jiawei <yin31149@gmail.com> Message-Id: <ee31c5420ffc8e6a29705ddd30badb814ddbae1d.1688743107.git.yin31149@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10vdpa: Restore packet receive filtering state relative with _F_CTRL_RX featureHawkins Jiawei
This patch introduces vhost_vdpa_net_load_rx_mode() and vhost_vdpa_net_load_rx() to restore the packet receive filtering state in relation to VIRTIO_NET_F_CTRL_RX feature at device's startup. Signed-off-by: Hawkins Jiawei <yin31149@gmail.com> Message-Id: <804cedac93e19ba3b810d52b274ca5ec11469f09.1688743107.git.yin31149@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10vdpa: Restore MAC address filtering stateHawkins Jiawei
This patch refactors vhost_vdpa_net_load_mac() to restore the MAC address filtering state at device's startup. Signed-off-by: Hawkins Jiawei <yin31149@gmail.com> Message-Id: <4b9550c14bc8c98c8f48e04dbf3d3ac41489d3fd.1688743107.git.yin31149@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10vdpa: Use iovec for vhost_vdpa_net_load_cmd()Hawkins Jiawei
According to VirtIO standard, "The driver MUST follow the VIRTIO_NET_CTRL_MAC_TABLE_SET command by a le32 number, followed by that number of non-multicast MAC addresses, followed by another le32 number, followed by that number of multicast addresses." Considering that these data is not stored in contiguous memory, this patch refactors vhost_vdpa_net_load_cmd() to accept scattered data, eliminating the need for an addtional data copy or packing the data into s->cvq_cmd_out_buffer outside of vhost_vdpa_net_load_cmd(). Signed-off-by: Hawkins Jiawei <yin31149@gmail.com> Message-Id: <3482cc50eebd13db4140b8b5dec9d0cc25b20b1b.1688743107.git.yin31149@gmail.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10pcie: Specify 0 for ARI next function numbersAkihiko Odaki
The current implementers of ARI are all SR-IOV devices. The ARI next function number field is undefined for VF according to PCI Express Base Specification Revision 5.0 Version 1.0 section 9.3.7.7. The PF still requires some defined value so end the linked list formed with the field by specifying 0 as required for any ARI implementation according to section 7.8.7.2. For migration, the field will keep having 1 as its value on the old QEMU machine versions. Fixes: 2503461691 ("pcie: Add some SR/IOV API documentation in docs/pcie_sriov.txt") Fixes: 44c2c09488 ("hw/nvme: Add support for SR-IOV") Fixes: 3a977deebe ("Intrdocue igb device emulation") Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Ani Sinha <anisinha@redhat.com> Message-Id: <20230710153838.33917-3-akihiko.odaki@daynix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10pcie: Use common ARI next function numberAkihiko Odaki
Currently the only implementers of ARI is SR-IOV devices, and they behave similar. Share the ARI next function number. Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Reviewed-by: Ani Sinha <anisinha@redhat.com> Message-Id: <20230710153838.33917-2-akihiko.odaki@daynix.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10include/hw/virtio: document some more usage of notifiersAlex Bennée
Lets document some more of the core VirtIODevice structure. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230710153522.3469097-7-alex.bennee@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10include/hw/virtio: add kerneldoc for virtio_initAlex Bennée
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230710153522.3469097-6-alex.bennee@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10include/hw/virtio: document virtio_notify_configAlex Bennée
Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230710153522.3469097-5-alex.bennee@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10hw/virtio: fix typo in VIRTIO_CONFIG_IRQ_IDX commentsAlex Bennée
Fixes: 544f0278af (virtio: introduce macro VIRTIO_CONFIG_IRQ_IDX) Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230710153522.3469097-4-alex.bennee@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10include/hw: document the device_class_set_parent_* fnsAlex Bennée
These are useful functions for when you want proper inheritance of functionality across realize/unrealize calls. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230710153522.3469097-3-alex.bennee@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10include: attempt to document device_class_set_propsAlex Bennée
I'm still not sure how I achieve by use case of the parent class defining the following properties: static Property vud_properties[] = { DEFINE_PROP_CHR("chardev", VHostUserDevice, chardev), DEFINE_PROP_UINT16("id", VHostUserDevice, id, 0), DEFINE_PROP_UINT32("num_vqs", VHostUserDevice, num_vqs, 1), DEFINE_PROP_END_OF_LIST(), }; But for the specialisation of the class I want the id to default to the actual device id, e.g.: static Property vu_rng_properties[] = { DEFINE_PROP_UINT16("id", VHostUserDevice, id, VIRTIO_ID_RNG), DEFINE_PROP_UINT32("num_vqs", VHostUserDevice, num_vqs, 1), DEFINE_PROP_END_OF_LIST(), }; And so far the API for doing that isn't super clear. Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Message-Id: <20230710153522.3469097-2-alex.bennee@linaro.org> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10vdpa: Fix possible use-after-free for VirtQueueElementHawkins Jiawei
QEMU uses vhost_handle_guest_kick() to forward guest's available buffers to the vdpa device in SVQ avail ring. In vhost_handle_guest_kick(), a `g_autofree` `elem` is used to iterate through the available VirtQueueElements. This `elem` is then passed to `svq->ops->avail_handler`, specifically to the vhost_vdpa_net_handle_ctrl_avail(). If this handler fails to process the CVQ command, vhost_handle_guest_kick() regains ownership of the `elem`, and either frees it or requeues it. Yet the problem is that, vhost_vdpa_net_handle_ctrl_avail() mistakenly frees the `elem`, even if it fails to forward the CVQ command to vdpa device. This can result in a use-after-free for the `elem` in vhost_handle_guest_kick(). This patch solves this problem by refactoring vhost_vdpa_net_handle_ctrl_avail() to only freeing the `elem` if it owns it. Fixes: bd907ae4b0 ("vdpa: manual forward CVQ buffers") Signed-off-by: Hawkins Jiawei <yin31149@gmail.com> Message-Id: <e3f2d7db477734afe5c6a5ab3fa8b8317514ea34.1688746840.git.yin31149@gmail.com> Reviewed-by: Eugenio Pérez <eperezma@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10pcie: Add hotplug detect state register to cmaskLeonardo Bras
When trying to migrate a machine type pc-q35-6.0 or lower, with this cmdline options, -device driver=pcie-root-port,port=18,chassis=19,id=pcie-root-port18,bus=pcie.0,addr=0x12 \ -device driver=nec-usb-xhci,p2=4,p3=4,id=nex-usb-xhci0,bus=pcie-root-port18,addr=0x12.0x1 the following bug happens after all ram pages were sent: qemu-kvm: get_pci_config_device: Bad config data: i=0x6e read: 0 device: 40 cmask: ff wmask: 0 w1cmask:19 qemu-kvm: Failed to load PCIDevice:config qemu-kvm: Failed to load pcie-root-port:parent_obj.parent_obj.parent_obj qemu-kvm: error while loading state for instance 0x0 of device '0000:00:12.0/pcie-root-port' qemu-kvm: load of migration failed: Invalid argument This happens on pc-q35-6.0 or lower because of: { "ICH9-LPC", ACPI_PM_PROP_ACPI_PCIHP_BRIDGE, "off" } In this scenario, hotplug_handler_plug() calls pcie_cap_slot_plug_cb(), which sets dev->config byte 0x6e with bit PCI_EXP_SLTSTA_PDS to signal PCI hotplug for the guest. After a while the guest will deal with this hotplug and qemu will clear the above bit. Then, during migration, get_pci_config_device() will compare the configs of both the freshly created device and the one that is being received via migration, which will differ due to the PCI_EXP_SLTSTA_PDS bit and cause the bug to reproduce. To avoid this fake incompatibility, there are tree fields in PCIDevice that can help: - wmask: Used to implement R/W bytes, and - w1cmask: Used to implement RW1C(Write 1 to Clear) bytes - cmask: Used to enable config checks on load. According to PCI Express® Base Specification Revision 5.0 Version 1.0, table 7-27 (Slot Status Register) bit 6, the "Presence Detect State" is listed as RO (read-only), so it only makes sense to make use of the cmask field. So, clear PCI_EXP_SLTSTA_PDS bit on cmask, so the fake incompatibility on get_pci_config_device() does not abort the migration. Buglink: https://bugzilla.redhat.com/show_bug.cgi?id=2215819 Signed-off-by: Leonardo Bras <leobras@redhat.com> Message-Id: <20230706045546.593605-3-leobras@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com>
2023-07-10virtio-iommu: Rework the traces in virtio_iommu_set_page_size_mask()Eric Auger
The current error messages in virtio_iommu_set_page_size_mask() sound quite similar for different situations and miss the IOMMU memory region that causes the issue. Clarify them and rework the comment. Also remove the trace when the new page_size_mask is not applied as the current frozen granule is kept. This message is rather confusing for the end user and anyway the current granule would have been used by the driver. Signed-off-by: Eric Auger <eric.auger@redhat.com> Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com> Message-Id: <20230705165118.28194-3-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
2023-07-10virtio-iommu: Fix 64kB host page size VFIO device assignmentEric Auger
When running on a 64kB page size host and protecting a VFIO device with the virtio-iommu, qemu crashes with this kind of message: qemu-kvm: virtio-iommu page mask 0xfffffffffffff000 is incompatible with mask 0x20010000 qemu: hardware error: vfio: DMA mapping failed, unable to continue This is due to the fact the IOMMU MR corresponding to the VFIO device is enabled very late on domain attach, after the machine init. The device reports a minimal 64kB page size but it is too late to be applied. virtio_iommu_set_page_size_mask() fails and this causes vfio_listener_region_add() to end up with hw_error(); To work around this issue, we transiently enable the IOMMU MR on machine init to collect the page size requirements and then restore the bypass state. Fixes: 90519b9053 ("virtio-iommu: Add bypass mode support to assigned device") Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-Id: <20230705165118.28194-2-eric.auger@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Tested-by: Jean-Philippe Brucker <jean-philippe@linaro.org> Reviewed-by: Zhenzhong Duan <zhenzhong.duan@intel.com>
2023-07-10hw/pci: warn when PCIe device is plugged into non-zero slot of downstream portAni Sinha
PCIe downstream ports only have a single device 0, so PCI Express devices can only be plugged into slot 0 on a PCIe port. Add a warning to let users know when the invalid configuration is used. We may enforce this more strongly later once we get more clarity on whether we are introducing a bad regression for users currently using the wrong configuration. The change has been tested to not break or alter behaviors of ARI capable devices by instantiating seven vfs on an emulated igb device (the maximum number of vfs the igb device supports). The vfs are instantiated correctly and are seen to have non-zero device/slot numbers in the conventional PCI BDF representation. CC: jusual@redhat.com CC: imammedo@redhat.com CC: mst@redhat.com CC: akihiko.odaki@daynix.com Resolves: https://bugzilla.redhat.com/show_bug.cgi?id=2128929 Signed-off-by: Ani Sinha <anisinha@redhat.com> Reviewed-by: Julia Suvorova <jusual@redhat.com> Message-Id: <20230705115925.5339-6-anisinha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Akihiko Odaki <akihiko.odaki@daynix.com>
2023-07-10tests/qtest/hd-geo-test: fix incorrect pcie-root-port usage and simplify testAni Sinha
The test attaches a SCSI controller to a non-zero slot and a pcie-to-pci bridge on slot 0 on the same pcie-root-port. Since a downstream device can be attached to a pcie-root-port only on slot 0, the above test configuration is not allowed. Additionally using pcie.0 as id for pcie-to-pci bridge is incorrect as that id is reserved only for the root bus. In the test scenario, there is no need to attach a pcie-root-port to the root complex. A SCSI controller can be attached to a pcie-to-pci bridge which can then be directly attached to the root bus (pcie.0). Fix the test and simplify it. CC: mst@redhat.com CC: imammedo@redhat.com CC: Michael Labiuk <michael.labiuk@virtuozzo.com> Acked-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Signed-off-by: Ani Sinha <anisinha@redhat.com> Message-Id: <20230705115925.5339-5-anisinha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10tests/acpi/bios-tables-test: update acpi blob q35/DSDT.noacpihpAni Sinha
Some fixes were committed in bios-tables-test in the previous commit. Update the acpi blob and clear bios-tables-test-allowed-diff.h so that the test continues to pass with the changes in the bios-tables-test. Following is the asl diff between the old and the newly updated blob: @@ -1,30 +1,30 @@ /* * Intel ACPI Component Architecture * AML/ASL+ Disassembler version 20210604 (64-bit version) * Copyright (c) 2000 - 2021 Intel Corporation * * Disassembling to symbolic ASL+ operators * - * Disassembly of tests/data/acpi/q35/DSDT.noacpihp, Wed Jun 21 18:26:52 2023 + * Disassembly of /tmp/aml-O8SU61, Wed Jun 21 18:26:52 2023 * * Original Table Header: * Signature "DSDT" - * Length 0x00002038 (8248) + * Length 0x00002031 (8241) * Revision 0x01 **** 32-bit table (V1), no 64-bit math support - * Checksum 0x4A + * Checksum 0x89 * OEM ID "BOCHS " * OEM Table ID "BXPC " * OEM Revision 0x00000001 (1) * Compiler ID "BXPC" * Compiler Version 0x00000001 (1) */ DefinitionBlock ("", "DSDT", 1, "BOCHS ", "BXPC ", 0x00000001) { Scope (\) { OperationRegion (DBG, SystemIO, 0x0402, One) Field (DBG, ByteAcc, NoLock, Preserve) { DBGB, 8 } @@ -3148,48 +3148,48 @@ { Name (_ADR, Zero) // _ADR: Address Method (_DSM, 4, Serialized) // _DSM: Device-Specific Method { Local0 = Package (0x01) { 0x01F5 } Return (EDSM (Arg0, Arg1, Arg2, Arg3, Local0)) } } } Device (S40) { Name (_ADR, 0x00080000) // _ADR: Address - Device (S41) + Device (S01) { - Name (_ADR, 0x00080001) // _ADR: Address + Name (_ADR, One) // _ADR: Address Method (_DSM, 4, Serialized) // _DSM: Device-Specific Method { Local0 = Package (0x01) { 0x0259 } Return (EDSM (Arg0, Arg1, Arg2, Arg3, Local0)) } } - Device (S48) + Device (S02) { - Name (_ADR, 0x00090000) // _ADR: Address + Name (_ADR, 0x02) // _ADR: Address Device (S00) { Name (_ADR, Zero) // _ADR: Address } } } Device (SF8) { Name (_ADR, 0x001F0000) // _ADR: Address OperationRegion (PIRQ, PCI_Config, 0x60, 0x0C) Scope (\_SB) { Field (PCI0.SF8.PIRQ, ByteAcc, NoLock, Preserve) { PRQA, 8, Signed-off-by: Ani Sinha <anisinha@redhat.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20230705115925.5339-4-anisinha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10tests/acpi/bios-tables-test: use the correct slot on the pcie-root-portAni Sinha
PCIE ports only have one slot, slot 0. Hence, non-zero slots are not available for PCIE devices on PCIE root ports. Fix test_acpi_q35_tcg_no_acpi_hotplug() so that the test does not use them. Signed-off-by: Ani Sinha <anisinha@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20230705115925.5339-3-anisinha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10tests/acpi: allow changes in DSDT.noacpihp table blobAni Sinha
We are going to fix bio-tables-test in the next patch and hence need to make sure the acpi tests continue to pass. Signed-off-by: Ani Sinha <anisinha@redhat.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Message-Id: <20230705115925.5339-2-anisinha@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2023-07-10vhost-vdpa: mute unaligned memory error reportLaurent Vivier
With TPM CRM device, vhost-vdpa reports an error when it tries to register a listener for a non aligned memory region: qemu-system-x86_64: vhost_vdpa_listener_region_add received unaligned region qemu-system-x86_64: vhost_vdpa_listener_region_del received unaligned region This error can be confusing for the user whereas we only need to skip the region (as it's already done after the error_report()) Rather than introducing a special case for TPM CRB memory section to not display the message in this case, simply replace the error_report() by a trace function (with more information, like the memory region name). Signed-off-by: Laurent Vivier <lvivier@redhat.com> Message-Id: <20230704071931.575888-2-lvivier@redhat.com> Reviewed-by: David Hildenbrand <david@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-02-06 06:10:40 +0000