aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-12-02misc: Replace 'struct QEMUTimer' by 'QEMUTimer'Stefan Weil
Most code already used QEMUTimer without the redundant 'struct' keyword. Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Andreas Färber <afaerber@suse.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-12-02qobject: Fix compiler warning (missing gnu_printf format attribute)Stefan Weil
gcc 4.8.2 reports this warning when extra warnings are enabled (-Wextra): CC qobject/qerror.o qobject/qerror.c: In function ‘qerror_from_info’: qobject/qerror.c:53:5: error: function might be possible candidate for ‘gnu_printf’ format attribute [-Werror=suggest-attribute=format] qerr->err_msg = g_strdup_vprintf(fmt, *va); ^ Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-12-02acpi-build: Fix compiler warning (missing gnu_printf format attribute)Stefan Weil
gcc 4.8.2 reports this warning when extra warnings are enabled (-Wextra): CC m68k-softmmu/hw/m68k/mcf5206.o hw/i386/acpi-build.c: In function ‘build_append_nameseg’: hw/i386/acpi-build.c:294:5: error: function might be possible candidate for ‘gnu_printf’ format attribute [-Werror=suggest-attribute=format] g_string_vprintf(s, format, args); ^ When this warning is fixed, there is a new compiler warning: CC i386-softmmu/hw/i386/acpi-build.o hw/i386/acpi-build.c: In function ‘build_append_notify’: hw/i386/acpi-build.c:632:5: error: format not a string literal and no format arguments [-Werror=format-security] build_append_nameseg(method, name); ^ This is fixed here, too. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-12-02.gitignore: Ignore config.statusFam Zheng
Signed-off-by: Fam Zheng <famz@redhat.com> Reviewed-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-12-02gtk: Replace conditional debug messages by trace methodsStefan Weil
Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-12-02console: Replace conditional debug messages by trace methodsStefan Weil
Signed-off-by: Stefan Weil <sw@weilnetz.de> Reviewed-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-12-02trace: Remove trace.h from hw/usb/hcd-ehci.h (less dependencies)Stefan Weil
This reduces the dependencies on trace.h. Only one source file which needs hcd-ehci.h also needs trace.h. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-12-02trace: Remove trace.h from console.h (less dependencies)Stefan Weil
This reduces the dependencies on trace.h. Only two source files which need console.h also need trace.h. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2013-11-27Open 2.0 development treeAnthony Liguori
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-11-27Update version for 1.7.0 releasev1.7.0Anthony Liguori
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-11-27qemu-iotests: Fix test 041Max Reitz
Performing multiple drive-mirror blockjobs on the same qemu instance results in the image file used for the block device being replaced by the newly mirrored file, which is not what we want. Fix this by performing one dedicated test per sync mode. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1385407736-13941-3-git-send-email-mreitz@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-11-27block/drive-mirror: Reuse backing HD for sync=noneMax Reitz
For "none" sync mode in "absolute-paths" mode, the current image should be used as the backing file for the newly created image. The current behavior is: a) If the image to be mirrored has a backing file, use that (which is wrong, since the operations recorded by "none" are applied to the image itself, not to its backing file). b) If the image to be mirrored lacks a backing file, the target doesn't have one either (which is not really wrong, but not really right, either; "none" records a set of operations executed on the image file, therefore having no backing file to apply these operations on seems rather pointless). For a, this is clearly a bugfix. For b, it is still a bugfix, although it might break existing API - but since that case crashed qemu just three weeks ago (before 1452686495922b81d6cf43edf025c1aef15965c0), we can safely assume there is no such API relying on that case yet. Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-id: 1385407736-13941-2-git-send-email-mreitz@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-11-25Update version for v1.7.0-rc2 releasev1.7.0-rc2Anthony Liguori
2013-11-25curses: fixup SIGWINCH handler messGerd Hoffmann
Don't run code in the signal handler, only set a flag. Use sigaction(2) to avoid non-portable signal(2) semantics. Make #ifdefs less messy. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Laszlo Ersek <lersek@redhat.com> Message-id: 1385130903-20531-1-git-send-email-kraxel@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-11-25qga: Fix two format strings for MinGWStefan Weil
Both code locations cause a compiler warning. Using "%s" instead of "%lu" would result in a program crash if the wrong code were executed. Signed-off-by: Stefan Weil <sw@weilnetz.de> Message-id: 1385409257-2522-1-git-send-email-sw@weilnetz.de Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-11-25PPC: BookE: Make FIT/WDT timers at best millisecond grainedAlexander Graf
The default granularity for the FIT timer on 440 is on every 0x1000th transition of TB from 0 to 1. Translated that means 48828 times a second. Since interrupts are quite expensive for 440 and we don't really care about the accuracy of the FIT to that significance, let's force FIT and WDT to at best millisecond granularity. This basically restores behavior as it was in QEMU 1.6, where timers could only deal with millisecond granularities at all. This patch greatly improves performance with the 440 target and restores roughly the same performance level that QEMU 1.6 had for me. Signed-off-by: Alexander Graf <agraf@suse.de> Message-id: 1385416015-22775-3-git-send-email-agraf@suse.de Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-11-25PPC: Make BookE FIT/WDT timers more lazyAlexander Graf
Today we fire FIT and WDT timer events every time the respective bit position in TB flips from 0 -> 1. However, there is no need to do this if the end result would be that we're changing a TSR bit that is set to 1 to 1 again. No guest visible change would have occured. So whenever we see that the TSR bit to our timer is already set, don't even bother to update the timer that would potentially fire it off. However, we do need to make sure that we update our timer that notifies us of the TB flip when the respective TSR bit gets unset. In that case we do care about the flip and need to notify the guest again. So add a callback into our timer handlers when TSR bits get unset. This improves performance for me when the guest is busy processing things. Signed-off-by: Alexander Graf <agraf@suse.de> Message-id: 1385416015-22775-2-git-send-email-agraf@suse.de Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-11-25acpi-build: fix support for glib < 2.22Michael S. Tsirkin
glib < 2.22 does not have g_array_get_element_size, limit it's use (to check all elements are 1 byte in size) to newer glib. This fixes build on RHEL 5.3. Reported-by: Richard Henderson <rth@redhat.com> Reported-by: Erik Rull <erik.rull@rdsoftware.de> Tested-by: Richard Henderson <rth@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20131125220039.GA16386@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-11-25Merge remote-tracking branch 'mst/tags/for_anthony' into stagingAnthony Liguori
pc very last minute fixes for 1.7 This has a fix for a crasher bug with pci bridges, boot failure fix for s390 on 32 bit hosts, and fixes build for hosts with old glib. There's also a fix for --iasl configure flag - it can be used to work around broken iasl on some systems either by using a non-standard iasl or by disabling it. I've also reverted a e1000/rtl mac programming change that seems slightly wrong and too risky for 1.8. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Mon 25 Nov 2013 03:40:07 AM PST using RSA key ID D28D5469 # gpg: Can't check signature: public key not found # By Michael S. Tsirkin (5) and Bandan Das (1) # Via Michael S. Tsirkin * mst/tags/for_anthony: configure: make --iasl option actually work Revert "e1000/rtl8139: update HMP NIC when every bit is written" acpi-build: fix build on glib < 2.14 acpi-build: fix build on glib < 2.22 pci: unregister vmstate_pcibus on unplug s390x: fix flat file load on 32 bit systems Message-id: 1385379990-32093-1-git-send-email-mst@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-11-25Merge remote-tracking branch 'bonzini/tags/for-anthony' into stagingAnthony Liguori
Here are a bunch of 1.7-tagged patches that I was afraid were getting forgotten or that did not have a clear maintainer responsible for making a pull request. # gpg: Signature made Thu 21 Nov 2013 08:40:59 AM PST using RSA key ID 9B4D86F2 # gpg: Can't check signature: public key not found # By Peter Maydell (3) and others # Via Paolo Bonzini * bonzini/tags/for-anthony: qga: Fix compiler warnings (missing format attribute, wrong format strings) mips jazz: do not raise data bus exception when accessing invalid addresses target-i386: yield to another VCPU on PAUSE rng-egd: offset the point when repeatedly read from the buffer rng-egd: remove redundant free target-i386: Fix build by providing stub kvm_arch_get_supported_cpuid() vfio-pci: Fix multifunction=on atomic.h: Fix build with clang pc: get rid of builtin pvpanic for "-M pc-1.5" configure: Explicitly set ARFLAGS so we can build with GNU Make 4.0 sun4m: Add FCode ROM for TCX framebuffer Message-id: 1385052578-32352-1-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-11-25Merge remote-tracking branch 'mdroth/qga-pull-2013-11-22' into stagingAnthony Liguori
# By Tomoki Sekiyama # Via Michael Roth * mdroth/qga-pull-2013-11-22: qemu-ga: vss-win32: Install VSS provider COM+ application service Message-id: 1385154505-15145-1-git-send-email-mdroth@linux.vnet.ibm.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-11-25Merge remote-tracking branch 'stefanha/net' into stagingAnthony Liguori
# By Vlad Yasevich # Via Stefan Hajnoczi * stefanha/net: qdev-properties-system.c: Allow vlan or netdev for -device, not both Message-id: 1385118544-28482-1-git-send-email-stefanha@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-11-24configure: make --iasl option actually workMichael S. Tsirkin
--iasl option was added to CC option parsing section by mistake, it's not effective there and attempts to use cause an 'unknown option' error. Fix this up. Tested-by: Marcel Apfelbaum <marcel.a@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2013-11-22qemu-ga: vss-win32: Install VSS provider COM+ application serviceTomoki Sekiyama
Currently, qemu-ga for Windows fails to execute guset-fsfreeze-freeze when no user is logging in to Windows, with an error message: {"error":{"class":"GenericError", "desc":"failed to add C:\\ to snapshotset: (error: 8004230f)"}} To enable guest-fsfreeze-freeze/thaw without logging in users, this installs a service to execute qemu-ga VSS provider COM+ application that has full access privileges to the local system. The service will automatically be removed when the COM+ application is deregistered. This patch replaces ICOMAdminCatalog interface with ICOMAdminCatalog2 interface that contains CreateServiceForApplication() method in addition. Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com> Reviewed-by: Gal Hammer <ghammer@redhat.com> Reviewed-by: Yan Vugenfirer <yvugenfi@redhat.com> Tested-by: Yan Vugenfirer <yvugenfi@redhat.com> Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
2013-11-22qdev-properties-system.c: Allow vlan or netdev for -device, not bothVlad Yasevich
It is currently possible to specify things like: -device e1000,netdev=foo,vlan=1 With this usage, whichever argument was specified last (vlan or netdev) overwrites what was previousely set and results in a non-working configuration. Even worse, when used with multiqueue devices, it causes a segmentation fault on exit in qemu_free_net_client. That patch treates the above command line options as invalid and generates an error at start-up. Signed-off-by: Vlad Yasevich <vyasevic@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2013-11-21qga: Fix compiler warnings (missing format attribute, wrong format strings)Stefan Weil
gcc 4.8.2 reports this warning when extra warnings are enabled (-Wextra): CC qga/commands.o qga/commands.c: In function ‘slog’: qga/commands.c:28:5: error: function might be possible candidate for ‘gnu_printf’ format attribute [-Werror=suggest-attribute=format] g_logv("syslog", G_LOG_LEVEL_INFO, fmt, ap); ^ gcc 4.8.2 reports this warning when slog is declared with the gnu_printf format attribute: qga/commands-posix.c: In function ‘qmp_guest_file_open’: qga/commands-posix.c:404:5: warning: format ‘%d’ expects argument of type ‘int’, but argument 2 has type ‘int64_t’ [-Wformat=] slog("guest-file-open, handle: %d", handle); ^ On 32 bit hosts there are three more warnings which are also fixed here. Signed-off-by: Stefan Weil <sw@weilnetz.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-11-21mips jazz: do not raise data bus exception when accessing invalid addressesHervé Poussineau
MIPS Jazz chipset doesn't seem to raise data bus exceptions on invalid accesses. However, there is no easy way to prevent them. Creating a big memory region for the whole address space doesn't prevent memory core to directly call unassigned_mem_read/write which in turn call cpu->do_unassigned_access, which (for MIPS CPU) raise an data bus exception. This fixes a MIPS Jazz regression introduced in c658b94f6e8c206c59d02aa6fbac285b86b53d2c. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-11-21target-i386: yield to another VCPU on PAUSEPaolo Bonzini
After commit b1bbfe7 (aio / timers: On timer modification, qemu_notify or aio_notify, 2013-08-21) FreeBSD guests report a huge slowdown. The problem shows up as soon as FreeBSD turns out its periodic (~1 ms) tick, but the timers are only the trigger for a pre-existing problem. Before the offending patch, setting a timer did a timer_settime system call. After, setting the timer exits the event loop (which uses poll) and reenters it with a new deadline. This does not cause any slowdown; the difference is between one system call (timer_settime and a signal delivery (SIGALRM) before the patch, and two system calls afterwards (write to a pipe or eventfd + calling poll again when re-entering the event loop). Unfortunately, the exit/enter causes the main loop to grab the iothread lock, which in turns kicks the VCPU thread out of execution. This causes TCG to execute the next VCPU in its round-robin scheduling of VCPUS. When the second VCPU is mostly unused, FreeBSD runs a "pause" instruction in its idle loop which only burns cycles without any progress. As soon as the timer tick expires, the first VCPU runs the interrupt handler but very soon it sets it again---and QEMU then goes back doing nothing in the second VCPU. The fix is to make the pause instruction do "cpu_loop_exit". Reported-by: Luigi Rizzo <rizzo@iet.unipi.it> Reviewed-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-11-21rng-egd: offset the point when repeatedly read from the bufferAmos Kong
The buffer content might be read out more than once, currently we just repeatedly read the first data block, buffer offset is missing. Cc: qemu-stable@nongnu.org Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-11-21rng-egd: remove redundant freeAmos Kong
We didn't set default chr_name, the free is redundant. Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-11-21target-i386: Fix build by providing stub kvm_arch_get_supported_cpuid()Peter Maydell
Fix build failures with clang when KVM is not enabled by providing a stub version of kvm_arch_get_supported_cpuid(). We retain the compile time check that this function isn't called when CONFIG_KVM is not set by guarding the stub with ifndef __OPTIMIZE__ (we assume that an optimizing build will do sufficient constant folding and dead code elimination to remove the calls before linking). Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-11-21vfio-pci: Fix multifunction=onAlex Williamson
When an assigned device is initialized it copies the device config space into the emulated config space. Unfortunately multifunction is setup prior to the device initfn and gets clobbered. We need to restore it just like pci-assign does. Cc: qemu-stable@nongnu.org Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-11-21atomic.h: Fix build with clangPeter Maydell
clang defines __ATOMIC_SEQ_CST but its implementation of the __atomic_exchange() builtin differs from that of gcc. Move the __clang__ branch of the ifdef ladder to the top and fix its implementation (there is no such builtin as __sync_exchange), so we can compile with clang again. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-11-21pc: get rid of builtin pvpanic for "-M pc-1.5"Paolo Bonzini
This causes two slight backwards-incompatibilities between "-M pc-1.5" and 1.5's "-M pc": (1) a fw_cfg file is removed with this patch. This is only a problem if migration stops the virtual machine exactly during fw_cfg enumeration. (2) after migration, a VM created without an explicit "-device pvpanic" will stop reporting panics to management. The first problem only occurs if migration is done at a very, very early point (and I'm not sure it can happen in practice for reasonable-size VMs, since it will likely take more time to send the RAM to destination, than it will take for BIOS to scan fw_cfg). The second problem only occurs if the guest panics _and_ has a guest driver _and_ management knows to look at the crash event, so it is mostly theoretical at this point in time. Thus keep the code simple, and pretend it was never broken. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-11-21configure: Explicitly set ARFLAGS so we can build with GNU Make 4.0Peter Maydell
Our rules.mak adds '-rR' to MAKEFLAGS to indicate that we will be explicitly specifying everything and not relying on any default variables or rules. However we were accidentally relying on the default ARFLAGS ("rv"). This went unnoticed because of a bug in GNU Make 3.82 and earlier which meant that adding -rR to MAKEFLAGS only affected submakes, not the currently running instance. Explicitly set ARFLAGS in config-host.mak, in the same way we handle CFLAGS and LDFLAGS; this will allow us to work with Make 4.0. Thanks to Paul Smith for analyzing this bug for us. Cc: qemu-stable@nongnu.org Reported-by: Ken Moffat <zarniwhoop@ntlworld.com> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-11-21sun4m: Add FCode ROM for TCX framebufferMark Cave-Ayland
Upstream OpenBIOS now implements SBus probing in order to determine the contents of a physical bus slot, which is required to allow OpenBIOS to identify the framebuffer without help from the fw_cfg interface. SBus probing works by detecting the presence of an FCode program (effectively tokenised Forth) at the base address of each slot, and if present executes it so that it creates its own device node in the OpenBIOS device tree. The FCode ROM is generated as part of the OpenBIOS build and should generally be updated at the same time. Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk> CC: Blue Swirl <blauwirbel@gmail.com> CC: Bob Breuer <breuerr@mc.net> CC: Artyom Tarasenko <atar4qemu@gmail.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2013-11-21Update version for 1.7.0-rc1 releasev1.7.0-rc1Anthony Liguori
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-11-21vfio-pci: Fix multifunction=onAlex Williamson
When an assigned device is initialized it copies the device config space into the emulated config space. Unfortunately multifunction is setup prior to the device initfn and gets clobbered. We need to restore it just like pci-assign does. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Bandan Das <bsd@redhat.com> Message-id: 20131112185059.7262.33780.stgit@bling.home Cc: qemu-stable@nongnu.org Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-11-21target-i386: Fix addr32 prefix in gen_lea_modrmRichard Henderson
Fix the following run-test-x86_64 testsuite failures: -lea (%%eax) = 0000000000000001 -lea (%%ebx) = 0000000000000002 -lea (%%ecx) = 0000000000000004 -lea (%%edx) = 0000000000000008 -lea (%%esi) = 0000000000000010 -lea (%%edi) = 0000000000000020 +lea (%%eax) = 0000abcc00000001 +lea (%%ebx) = 0000abcf00000002 +lea (%%ecx) = 0000abc900000004 +lea (%%edx) = 0000abc500000008 +lea (%%esi) = 0000abdd00000010 +lea (%%edi) = 0000abed00000020 In addition, reduce ifdeffery and minimize the number of TCG ops produced during address computation. Signed-off-by: Richard Henderson <rth@twiddle.net> Message-id: 1384219016-5170-1-git-send-email-rth@twiddle.net Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-11-21atomic.h: Fix build with clangPeter Maydell
clang defines __ATOMIC_SEQ_CST but its implementation of the __atomic_exchange() builtin differs from that of gcc. Move the __clang__ branch of the ifdef ladder to the top and fix its implementation (there is no such builtin as __sync_exchange), so we can compile with clang again. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1382435921-18438-1-git-send-email-peter.maydell@linaro.org Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-11-21target-i386: do not override nr_cores for -cpu hostPaolo Bonzini
Commit 787aaf5 (target-i386: forward CPUID cache leaves when -cpu host is used, 2013-09-02) brings bits 31..26 of CPUID leaf 04h out of sync with the APIC IDs that QEMU reserves for each package. This number must come from "-smp" options rather than from the host CPUID. It also turns out that this unsyncing makes Windows Server 2012R2 fail to boot. Tested-by: Peter Lieven <pl@kamp.de> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Benoit Canet <benoit@irqsave.net> Reviewed-by: Eduardo Habkost <ehabkost@redhat.com> Message-id: 1384879786-6721-1-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-11-21mips jazz: do not raise data bus exception when accessing invalid addressesHervé Poussineau
MIPS Jazz chipset doesn't seem to raise data bus exceptions on invalid accesses. However, there is no easy way to prevent them. Creating a big memory region for the whole address space doesn't prevent memory core to directly call unassigned_mem_read/write which in turn call cpu->do_unassigned_access, which (for MIPS CPU) raise an data bus exception. This fixes a MIPS Jazz regression introduced in c658b94f6e8c206c59d02aa6fbac285b86b53d2c. Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Message-id: 1383603977-7003-1-git-send-email-hpoussin@reactos.org Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-11-21target-i386: yield to another VCPU on PAUSEPaolo Bonzini
After commit b1bbfe7 (aio / timers: On timer modification, qemu_notify or aio_notify, 2013-08-21) FreeBSD guests report a huge slowdown. The problem shows up as soon as FreeBSD turns out its periodic (~1 ms) tick, but the timers are only the trigger for a pre-existing problem. Before the offending patch, setting a timer did a timer_settime system call. After, setting the timer exits the event loop (which uses poll) and reenters it with a new deadline. This does not cause any slowdown; the difference is between one system call (timer_settime and a signal delivery (SIGALRM) before the patch, and two system calls afterwards (write to a pipe or eventfd + calling poll again when re-entering the event loop). Unfortunately, the exit/enter causes the main loop to grab the iothread lock, which in turns kicks the VCPU thread out of execution. This causes TCG to execute the next VCPU in its round-robin scheduling of VCPUS. When the second VCPU is mostly unused, FreeBSD runs a "pause" instruction in its idle loop which only burns cycles without any progress. As soon as the timer tick expires, the first VCPU runs the interrupt handler but very soon it sets it again---and QEMU then goes back doing nothing in the second VCPU. The fix is to make the pause instruction do "cpu_loop_exit". Cc: Richard Henderson <rth@twiddle.net> Reported-by: Luigi Rizzo <rizzo@iet.unipi.it> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Richard Henderson <rth@twiddle.net> Message-id: 1384948442-24217-1-git-send-email-pbonzini@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-11-21rng-egd: offset the point when repeatedly read from the bufferAmos Kong
The buffer content might be read out more than once, currently we just repeatedly read the first data block, buffer offset is missing. Cc: qemu-stable@nongnu.org Signed-off-by: Amos Kong <akong@redhat.com> Message-id: 1385023371-8198-3-git-send-email-akong@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-11-21rng-egd: remove redundant freeAmos Kong
We didn't set default chr_name, the free is redundant. Signed-off-by: Amos Kong <akong@redhat.com> Message-id: 1385023371-8198-2-git-send-email-akong@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-11-21virtio-rng: add check of periodAmos Kong
If period is assigned to 0, limit timer will expire immediately. It causes a qemu warning: "main-loop: WARNING: I/O thread spun for 1000 iterations" This limit is meaningless. This patch forbids to assign 0 to period. Reviewed-by: Amit Shah <amit.shah@redhat.com> Signed-off-by: Amos Kong <akong@redhat.com> Message-id: 1385031203-23790-1-git-send-email-akong@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-11-21s390x: fix flat file load on 32 bit systemsMichael S. Tsirkin
pc-bios/s390-zipl.rom is a flat image so it's expected that loading it as elf will fail. It should fall back on loading a flat file, but doesn't on 32 bit systems, instead it fails printing: qemu: hardware error: could not load bootloader 's390-zipl.rom' The result is boot failure. The reason is that a 64 bit unsigned interger which is set to -1 on error is compared to -1UL which on a 32 bit system with gcc is a 32 bit unsigned interger. Since both are unsigned, no sign extension takes place and comparison evaluates to non-equal. There's no reason to do clever tricks: all functions we call actually return int so just use int. And then we can use == -1 everywhere, consistently. Reviewed-by: Alexander Graf <agraf@suse.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Message-id: 20131121133426.GA30827@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-11-21acpi-build: fix build on glib < 2.14Michael S. Tsirkin
g_array_get_element_size was only added in glib 2.14. Fortunately we don't use it for any arrays where element size is > 1, so just add an assert. Reported-by: Richard Henderson <rth@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1385036128-8753-2-git-send-email-mst@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-11-21acpi-build: fix build on glib < 2.22Michael S. Tsirkin
g_string_vprintf was only introduced in 2.24 so switch to vsnprintf instead. A bit uglier but name size is fixed at 4 bytes here so it's easy. Reported-by: Richard Henderson <rth@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Message-id: 1385036128-8753-1-git-send-email-mst@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>
2013-11-21Merge remote-tracking branch 'qemu-kvm/uq/master' into stagingAnthony Liguori
# By Jan Kiszka (1) and others # Via Gleb Natapov * qemu-kvm/uq/master: kvm: Fix uninitialized cpuid_data pci-assign: Remove dead code for direct I/O region access from userspace KVM: x86: fix typo in KVM_GET_XCRS Message-id: cover.1385040432.git.gleb@redhat.com Signed-off-by: Anthony Liguori <aliguori@amazon.com>