| Age | Commit message (Collapse) | Author |
|---|
|
Make test_x86_memdev_resp() more flexible by allowing arbitrary
memory sizes as parameter here.
Message-Id: <20230704071655.75381-2-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Add a small test to prevent regressions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230704081506.276055-13-iii@linux.ibm.com>
[thuth: Apply fix for compiling with GCC 11]
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Add a small test to prevent regressions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230704081506.276055-12-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Add a small test to prevent regressions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20230704081506.276055-11-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Add a small test to prevent regressions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Acked-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230704081506.276055-10-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Add a small test to prevent regressions.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230704081506.276055-9-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
The expression "imm * 2" in gen_ri2() can wrap around if imm is large
enough.
Fix by casting imm to int64_t, like it's done in disas_jdest().
Fixes: e8ecdfeb30f0 ("Fix EXECUTE of relative branches")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230704081506.276055-8-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
LRA should perform DAT regardless of whether it's on or off.
Disable DAT check for MMU_S390_LRA.
Fixes: defb0e3157af ("s390x: Implement opcode helpers")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: qemu-stable@nongnu.org
Message-Id: <20230704081506.276055-7-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
When a DAT error occurs, LRA is supposed to write the error information
to the bottom 32 bits of R1, and leave the top 32 bits of R1 alone.
Fix by passing the original value of R1 into helper and copying the
top 32 bits to the return value.
Fixes: d8fe4a9c284f ("target-s390: Convert LRA")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: qemu-stable@nongnu.org
Message-Id: <20230704081506.276055-6-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Using a large R0 causes an assertion error:
qemu-s390x: target/s390x/tcg/mem_helper.c:183: access_prepare_nf: Assertion `size > 0 && size <= 4096' failed.
Even though PoP explicitly advises against using more than 8 bits for the
size, an emulator crash is never a good thing.
Fix by truncating the size to 8 bits.
Fixes: ea0a1053e276 ("s390x/tcg: Implement Miscellaneous-Instruction-Extensions Facility 3 for the s390x")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: qemu-stable@nongnu.org
Message-Id: <20230704081506.276055-5-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
These instructions multiply 32 bits by 32 bits, not 32 bits by 64 bits.
Fixes: 83b00736f3d8 ("target-s390: Convert FP MULTIPLY")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: qemu-stable@nongnu.org
Message-Id: <20230704081506.276055-4-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
EPSW should explicitly calculate and insert CC, like IPM does.
Fixes: e30a9d3fea58 ("target-s390: Implement EPSW")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Cc: qemu-stable@nongnu.org
Message-Id: <20230704081506.276055-3-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Make the PSW look more similar to the real s390x userspace PSW.
Except for being there, the newly added bits should not affect the
userspace code execution.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230704081506.276055-2-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Protected Virtualization (PV) is not a real hardware device:
it is a feature of the firmware on s390x that is exposed to
userspace via the KVM interface.
Move the pv.c/pv.h files to target/s390x/kvm/ to make this clearer.
Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230624200644.23931-1-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Add several qga_debug() statements in functions.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
|
|
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
|
|
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
|
|
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
|
|
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
|
|
The allow-rpcs option accepts a comma-separated list of RPCs to
enable. This option is opposite to --block-rpcs. Using --block-rpcs
and --allow-rpcs at the same time is not allowed.
resolves: https://gitlab.com/qemu-project/qemu/-/issues/1505
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
|
|
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
|
|
This patch introduces the RISC-V Zfa extension, which introduces
additional floating-point instructions:
* fli (load-immediate) with pre-defined immediates
* fminm/fmaxm (like fmin/fmax but with different NaN behaviour)
* fround/froundmx (round to integer)
* fcvtmod.w.d (Modular Convert-to-Integer)
* fmv* to access high bits of float register bigger than XLEN
* Quiet comparison instructions (fleq/fltq)
Zfa defines its instructions in combination with the following extensions:
* single-precision floating-point (F)
* double-precision floating-point (D)
* quad-precision floating-point (Q)
* half-precision floating-point (Zfh)
Since QEMU does not support the RISC-V quad-precision floating-point
ISA extension (Q), this patch does not include the instructions that
depend on this extension. All other instructions are included in this
patch.
The Zfa specification can be found here:
https://github.com/riscv/riscv-isa-manual/blob/master/src/zfa.tex
The Zfa specifciation is frozen and is in public review since May 3, 2023:
https://groups.google.com/a/groups.riscv.org/g/isa-dev/c/SED4ntBkabg
The patch also includes a TCG test for the fcvtmod.w.d instruction.
The test cases test for correct results and flag behaviour.
Note, that the Zfa specification requires fcvtmod's flag behaviour
to be identical to a fcvt with the same operands (which is also
tested).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-Id: <20230710071243.282464-1-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
If we don't set a proper cbom_blocksize|cboz_blocksize in the FDT the
Linux Kernel will fail to detect the availability of the CBOM/CBOZ
extensions, regardless of the contents of the 'riscv,isa' DT prop.
The FDT is being written using the cpu->cfg.cbom|z_blocksize attributes,
so let's expose them as user properties like it is already done with
TCG.
This will also require us to determine proper blocksize values during
init() time since the FDT is already created during realize(). We'll
take a ride in kvm_riscv_init_multiext_cfg() to do it. Note that we
don't need to fetch both cbom and cboz blocksizes every time: check for
their parent extensions (icbom and icboz) and only read the blocksizes
if needed.
In contrast with cbom|z_blocksize properties from TCG, the user is not
able to set any value that is different from the 'host' value when
running KVM. KVM can be particularly harsh dealing with it: a ENOTSUPP
can be thrown for the mere attempt of executing kvm_set_one_reg() for
these 2 regs.
Hopefully we don't need to call kvm_set_one_reg() for these regs.
We'll check if the user input matches the host value in
kvm_cpu_set_cbomz_blksize(), the set() accessor for both blocksize
properties. We'll fail fast since it's already known to not be
supported.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-21-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
There are 2 places in which we need to get a pointer to a certain
property of the cpu->cfg struct based on property offset. Next patch
will add a couple more.
Create a helper to avoid repeating this code over and over.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-20-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
We're now ready to update the multi-letter extensions status for KVM.
kvm_riscv_update_cpu_cfg_isa_ext() is called called during vcpu creation
time to verify which user options changes host defaults (via the 'user_set'
flag) and tries to write them back to KVM.
Failure to commit a change to KVM is only ignored in case KVM doesn't
know about the extension (-EINVAL error code) and the user wanted to
disable the given extension. Otherwise we're going to abort the boot
process.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-19-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
KVM-specific properties are being created inside target/riscv/kvm.c. But
at this moment we're gathering all the remaining properties from TCG and
adding them as is when running KVM. This creates a situation where
non-KVM properties are setting flags to 'true' due to its default
settings (e.g. Zawrs). Users can also freely enable them via command
line.
This doesn't impact runtime per se because KVM doesn't care about these
flags, but code such as riscv_isa_string_ext() take those flags into
account. The result is that, for a KVM guest, setting non-KVM properties
will make them appear in the riscv,isa DT.
We want to keep the same API for both TCG and KVM and at the same time,
when running KVM, forbid non-KVM extensions to be enabled internally. We
accomplish both by changing riscv_cpu_add_user_properties() to add a
mock boolean property for every non-KVM extension in
riscv_cpu_extensions[]. Then, when running KVM, users are still free to
set extensions at will, but we'll error out if a non-KVM extension is
enabled. Setting such extension to 'false' will be ignored.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-18-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
riscv_isa_string_ext() is being used by riscv_isa_string(), which is
then used by boards to retrieve the 'riscv,isa' string to be written in
the FDT. All this happens after riscv_cpu_realize(), meaning that we're
already past riscv_cpu_validate_set_extensions() and, more important,
riscv_cpu_disable_priv_spec_isa_exts().
This means that all extensions that needed to be disabled due to
priv_spec mismatch are already disabled. Checking this again during
riscv_isa_string_ext() is unneeded. Remove it.
As a bonus, riscv_isa_string_ext() can now be used with the 'host'
KVM-only CPU type since it doesn't have a env->priv_ver assigned and it
would fail this check for no good reason.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-17-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
riscv_cpu_add_user_properties() ended up with an excess of "#ifndef
CONFIG_USER_ONLY" blocks after changes that added KVM properties
handling.
KVM specific properties are required to be created earlier than their
TCG counterparts, but the remaining props can be created at any order.
Move riscv_add_satp_mode_properties() to the start of the function,
inside the !CONFIG_USER_ONLY block already present there, to remove the
last ifndef block.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-16-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
Let's add KVM user properties for the multi-letter extensions that KVM
currently supports: zicbom, zicboz, zihintpause, zbb, ssaia, sstc,
svinval and svpbmt.
As with MISA extensions, we're using the KVMCPUConfig type to hold
information about the state of each extension. However, multi-letter
extensions have more cases to cover than MISA extensions, so we're
adding an extra 'supported' flag as well. This flag will reflect if a
given extension is supported by KVM, i.e. KVM knows how to handle it.
This is determined during KVM extension discovery in
kvm_riscv_init_multiext_cfg(), where we test for EINVAL errors. Any
other error will cause an abort.
The use of the 'user_set' is similar to what we already do with MISA
extensions: the flag set only if the user is changing the extension
state.
The 'supported' flag will be used later on to make an exception for
users that are disabling multi-letter extensions that are unknown to
KVM.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-Id: <20230706101738.460804-15-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
Our design philosophy with KVM properties can be resumed in two main
decisions based on KVM interface availability and what the user wants to
do:
- if the user disables an extension that the host KVM module doesn't
know about (i.e. it doesn't implement the kvm_get_one_reg() interface),
keep booting the CPU. This will avoid users having to deal with issues
with older KVM versions while disabling features they don't care;
- for any other case we're going to error out immediately. If the user
wants to enable a feature that KVM doesn't know about this a problem that
is worth aborting - the user must know that the feature wasn't enabled
in the hart. Likewise, if KVM knows about the extension, the user wants
to enable/disable it, and we fail to do it so, that's also a problem we
can't shrug it off.
In the case of MISA bits we won't even try enabling bits that aren't
already available in the host. The ioctl() is so likely to fail that
it's not worth trying. This check is already done in the previous patch,
in kvm_cpu_set_misa_ext_cfg(), thus we don't need to worry about it now.
In kvm_riscv_update_cpu_misa_ext() we'll go through every potential user
option and do as follows:
- if the user didn't set the property or set to the same value of the
host, do nothing;
- Disable the given extension in KVM. Error out if anything goes wrong.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-14-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
Using all TCG user properties in KVM is tricky. First because KVM
supports only a small subset of what TCG provides, so most of the
cpu->cfg flags do nothing for KVM.
Second, and more important, we don't have a way of telling if any given
value is an user input or not. For TCG this has a small impact since we
just validating everything and error out if needed. But for KVM it would
be good to know if a given value was set by the user or if it's a value
already provided by KVM. Otherwise we don't know how to handle failed
kvm_set_one_regs() when writing the configurations back.
These characteristics make it overly complicated to use the same user
facing flags for both KVM and TCG. A simpler approach is to create KVM
specific properties that have specialized logic, forking KVM and TCG use
cases for those cases only. Fully separating KVM/TCG properties is
unneeded at this point - in fact we want the user experience to be as
equal as possible, regardless of the acceleration chosen.
We'll start this fork with the MISA properties, adding the MISA bits
that the KVM driver currently supports. A new KVMCPUConfig type is
introduced. It'll hold general information about an extension. For MISA
extensions we're going to use the newly created getters of
misa_ext_infos[] to populate their name and description. 'offset' holds
the MISA bit (RVA, RVC, ...). We're calling it 'offset' instead of
'misa_bit' because this same KVMCPUConfig struct will be used to
multi-letter extensions later on.
This new type also holds a 'user_set' flag. This flag will be set when
the user set an option that's different than what is already configured
in the host, requiring KVM intervention to write the regs back during
kvm_arch_init_vcpu(). Similar mechanics will be implemented for
multi-letter extensions as well.
There is no need to duplicate more code than necessary, so we're going
to use the existing kvm_riscv_init_user_properties() to add the KVM
specific properties. Any code that is adding a TCG user prop is then
changed slightly to verify first if there's a KVM prop with the same
name already added.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-13-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
Next patch will add KVM specific user properties for both MISA and
multi-letter extensions. For MISA extensions we want to make use of what
is already available in misa_ext_cfgs[] to avoid code repetition.
misa_ext_info_arr[] array will hold name and description for each MISA
extension that misa_ext_cfgs[] is declaring. We'll then use this new
array in KVM code to avoid duplicating strings. Two getters were added
to allow KVM to retrieve the 'name' and 'description' for each MISA
property.
There's nothing holding us back from doing the same with multi-letter
extensions. For now doing just with MISA extensions is enough.
It is worth documenting that even using the __bultin_ctz() directive to
populate the misa_ext_info_arr[] we are forced to assign 'name' and
'description' during runtime in riscv_cpu_add_misa_properties(). The
reason is that some Gitlab runners ('clang-user' and 'tsan-build') will
throw errors like this if we fetch 'name' and 'description' from the
array in the MISA_CFG() macro:
../target/riscv/cpu.c:1624:5: error: initializer element is not a
compile-time constant
MISA_CFG(RVA, true),
^~~~~~~~~~~~~~~~~~~
../target/riscv/cpu.c:1619:53: note: expanded from macro 'MISA_CFG'
{.name = misa_ext_info_arr[MISA_INFO_IDX(_bit)].name, \
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~
gcc and others compilers/builders were fine with that change. We can't
ignore failures in the Gitlab pipeline though, so code was changed to
make every runner happy.
As a side effect, misa_ext_cfg[] is no longer a 'const' array because
it must be set during runtime.
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-12-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
At this moment we're retrieving env->misa_ext during
kvm_arch_init_cpu(), leaving env->misa_ext_mask behind.
We want to set env->misa_ext_mask, and we want to set it as early as
possible. The reason is that we're going to use it in the validation
process of the KVM MISA properties we're going to add next. Setting it
during arch_init_cpu() is too late for user validation.
Move the code to a new helper that is going to be called during init()
time, via kvm_riscv_init_user_properties(), like we're already doing for
the machine ID properties. Set both misa_ext and misa_ext_mask to the
same value retrieved by the 'isa' config reg.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-11-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
After changing user validation for mvendorid/marchid/mimpid to guarantee
that the value is validated on user input time, coupled with the work in
fetching KVM default values for them by using a scratch CPU, we're
certain that the values in cpu->cfg.(mvendorid|marchid|mimpid) are
already good to be written back to KVM.
There's no need to write the values back for 'host' type CPUs since the
values can't be changed, so let's do that just for generic CPUs.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-9-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
Allow 'marchid' and 'mimpid' to also be initialized in
kvm_riscv_init_machine_ids().
After this change, the handling of mvendorid/marchid/mimpid for the
'host' CPU type will be equal to what we already have for TCG named
CPUs, i.e. the user is not able to set these values to a different val
than the one that is already preset.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
Certain validations, such as the validations done for the machine IDs
(mvendorid/marchid/mimpid), are done before starting the CPU.
Non-dynamic (named) CPUs tries to match user input with a preset
default. As it is today we can't prefetch a KVM default for these cases
because we're only able to read/write KVM regs after the vcpu is
spinning.
Our target/arm friends use a concept called "scratch CPU", which
consists of creating a vcpu for doing queries and validations and so on,
which is discarded shortly after use [1]. This is a suitable solution
for what we need so let's implement it in target/riscv as well.
kvm_riscv_init_machine_ids() will be used to do any pre-launch setup for
KVM CPUs, via riscv_cpu_add_user_properties(). The function will create
a KVM scratch CPU, fetch KVM regs that work as default values for user
properties, and then discard the scratch CPU afterwards.
We're starting by initializing 'mvendorid'. This concept will be used to
init other KVM specific properties in the next patches as well.
[1] target/arm/kvm.c, kvm_arm_create_scratch_host_vcpu()
Suggested-by: Andrew Jones <ajones@ventanamicro.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
'marchid' shouldn't be set to a different value as previously set for
named CPUs.
For all other CPUs it shouldn't be freely set either - the spec requires
that 'marchid' can't have the MSB (most significant bit) set and every
other bit set to zero, i.e. 0x80000000 is an invalid 'marchid' value for
32 bit CPUs.
As with 'mimpid', setting a default value based on the current QEMU
version is not a good idea because it implies that the CPU
implementation changes from one QEMU version to the other. Named CPUs
should set 'marchid' to a meaningful value instead, and generic CPUs can
set to any valid value.
For the 'veyron-v1' CPU this is the error thrown if 'marchid' is set to
a different val:
$ ./build/qemu-system-riscv64 -M virt -nographic -cpu veyron-v1,marchid=0x80000000
qemu-system-riscv64: can't apply global veyron-v1-riscv-cpu.marchid=0x80000000:
Unable to change veyron-v1-riscv-cpu marchid (0x8000000000010000)
And, for generics CPUs, this is the error when trying to set to an
invalid val:
$ ./build/qemu-system-riscv64 -M virt -nographic -cpu rv64,marchid=0x8000000000000000
qemu-system-riscv64: can't apply global rv64-riscv-cpu.marchid=0x8000000000000000:
Unable to set marchid with MSB (64) bit set and the remaining bits zero
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
Following the same logic used with 'mvendorid' let's also restrict
'mimpid' for named CPUs. Generic CPUs keep setting the value freely.
Note that we're getting rid of the default RISCV_CPU_MARCHID value. The
reason is that this is not a good default since it's dynamic, changing
with with every QEMU version, regardless of whether the actual
implementation of the CPU changed from one QEMU version to the other.
Named CPU should set it to a meaningful value instead and generic CPUs
can set whatever they want.
This is the error thrown for an invalid 'mimpid' value for the veyron-v1
CPU:
$ ./qemu-system-riscv64 -M virt -nographic -cpu veyron-v1,mimpid=2
qemu-system-riscv64: can't apply global veyron-v1-riscv-cpu.mimpid=2:
Unable to change veyron-v1-riscv-cpu mimpid (0x111)
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
We're going to change the handling of mvendorid/marchid/mimpid by the
KVM driver. Since these are always present in all CPUs let's put the
same validation for everyone.
It doesn't make sense to allow 'mvendorid' to be different than it
is already set in named (vendor) CPUs. Generic (dynamic) CPUs can have
any 'mvendorid' they want.
Change 'mvendorid' to be a class property created via
'object_class_property_add', instead of using the DEFINE_PROP_UINT32()
macro. This allow us to define a custom setter for it that will verify,
for named CPUs, if mvendorid is different than it is already set by the
CPU. This is the error thrown for the 'veyron-v1' CPU if 'mvendorid' is
set to an invalid value:
$ qemu-system-riscv64 -M virt -nographic -cpu veyron-v1,mvendorid=2
qemu-system-riscv64: can't apply global veyron-v1-riscv-cpu.mvendorid=2:
Unable to change veyron-v1-riscv-cpu mvendorid (0x61f)
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
The absence of a satp mode in riscv_host_cpu_init() is causing the
following error:
$ ./qemu/build/qemu-system-riscv64 -machine virt,accel=kvm \
-m 2G -smp 1 -nographic -snapshot \
-kernel ./guest_imgs/Image \
-initrd ./guest_imgs/rootfs_kvm_riscv64.img \
-append "earlycon=sbi root=/dev/ram rw" \
-cpu host
**
ERROR:../target/riscv/cpu.c:320:satp_mode_str: code should not be
reached
Bail out! ERROR:../target/riscv/cpu.c:320:satp_mode_str: code should
not be reached
Aborted
The error is triggered from create_fdt_socket_cpus() in hw/riscv/virt.c.
It's trying to get satp_mode_str for a NULL cpu->cfg.satp_mode.map.
For this KVM cpu we would need to inherit the satp supported modes
from the RISC-V host. At this moment this is not possible because the
KVM driver does not support it. And even when it does we can't just let
this broken for every other older kernel.
Since mmu-type is not a required node, according to [1], skip the
'mmu-type' FDT node if there's no satp_mode set. We'll revisit this
logic when we can get satp information from KVM.
[1] https://github.com/torvalds/linux/blob/master/Documentation/devicetree/bindings/riscv/cpus.yaml
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230706101738.460804-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
As it is today it's not possible to use '-cpu host' if the RISC-V host
has RVH enabled. This is the resulting error:
$ ./qemu/build/qemu-system-riscv64 \
-machine virt,accel=kvm -m 2G -smp 1 \
-nographic -snapshot -kernel ./guest_imgs/Image \
-initrd ./guest_imgs/rootfs_kvm_riscv64.img \
-append "earlycon=sbi root=/dev/ram rw" \
-cpu host
qemu-system-riscv64: H extension requires priv spec 1.12.0
This happens because we're checking for priv spec for all CPUs, and
since we're not setting env->priv_ver for the 'host' CPU, it's being
default to zero (i.e. PRIV_SPEC_1_10_0).
In reality env->priv_ver does not make sense when running with the KVM
'host' CPU. It's used to gate certain CSRs/extensions during translation
to make them unavailable if the hart declares an older spec version. It
doesn't have any other use. E.g. OpenSBI version 1.2 retrieves the spec
checking if the CSR_MCOUNTEREN, CSR_MCOUNTINHIBIT and CSR_MENVCFG CSRs
are available [1].
'priv_ver' is just one example. We're doing a lot of feature validation
and setup during riscv_cpu_realize() that it doesn't apply to KVM CPUs.
Validating the feature set for those CPUs is a KVM problem that should
be handled in KVM specific code.
The new riscv_cpu_realize_tcg() helper contains all validation logic that
are applicable to TCG CPUs only. riscv_cpu_realize() verifies if we're
running TCG and, if it's the case, proceed with the usual TCG realize()
logic.
[1] lib/sbi/sbi_hart.c, hart_detect_features()
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706101738.460804-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
fdt_load_addr was previously declared as uint32_t which doe not match
with the return type of riscv_compute_fdt_addr().
This patch modifies the fdt_load_addr type from a uint32_t to a uint64_t
to match the riscv_compute_fdt_addr() return type.
This fixes calculating the fdt address when DRAM is mapped to higher
64-bit address.
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Lakshmi Bai Raja Subramanian <lakshmi.bai.rajasubramanian@bodhicomputing.com>
[ Change by AF:
- Cleanup commit title and message
]
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <168872495192.6334.3845988291412774261-1@git.sr.ht>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
If the devicetree is created before machine initialization is complete,
it misses dynamic devices. Specifically, the tpm device is not added
to the devicetree file and is therefore not instantiated in Linux.
Load/create devicetree in virt_machine_done() to solve the problem.
Cc: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Cc: Alistair Francis <alistair23@gmail.com>
Cc: Daniel Henrique Barboza <dbarboza@ventanamicro.c>
Fixes: 325b7c4e75 hw/riscv: Enable TPM backends
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230706035937.1870483-1-linux@roeck-us.net>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
Should set/get riscv all reg timer,i.e, time/compare/frequency/state.
Signed-off-by: Yang Zhang <yang.zhang@hexintek.com>
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1688
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230707032306.4606-1-gaoshanliukou@163.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230703071759.86775-2-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
The privileged spec states:
For a memory access made to support VS-stage address translation (such as
to read/write a VS-level page table), permissions are checked as though
for a load or store, not for the original access type. However, any
exception is always reported for the original access type (instruction,
load, or store/AMO).
The current implementation converts the access type to LOAD if implicit
G-stage translation fails which results in only reporting "Load guest-page
fault". This commit removes the convertion of access type, so the reported
exception conforms to the spec.
Signed-off-by: Jason Chien <jason.chien@sifive.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230627074915.7686-1-jason.chien@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-Id: <20230615063302.102409-6-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
Add trans_* and helper function for Zvfbfwma instructions.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230615063302.102409-5-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
Add trans_* and helper function for Zvfbfmin instructions.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230615063302.102409-4-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
|
Add trans_* and helper function for Zfbfmin instructions.
Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn>
Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230615063302.102409-3-liweiwei@iscas.ac.cn>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
|
