| Age | Commit message (Collapse) | Author |
|---|
|
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
TCG implements RDSEED, and in fact uses qcrypto_random_bytes which is
secure enough to match hardware behavior. Expose it to guests.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
The AMD prefetch(w) instructions have not been deprecated together with the rest
of 3DNow!, and in fact are even supported by newer Intel processor. Mark them
as supported by TCG, as it supports all of 3DNow!.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Due to a typo or perhaps a brain fart, the INVD vmexit was never generated.
Fix it (but not that fixing just the typo would break both INVD and WBINVD,
due to a case of two wrongs making a right).
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
A regression has been detected in latency testing of KVM guests.
More specifically, it was observed that the cyclictest
numbers inside of an isolated vcpu (running on isolated pcpu) are:
Where a maximum of 50us is acceptable.
The implementation of KVM_GET_STATS_FD uses run_on_cpu to query
per vcpu statistics, which interrupts the vcpu (and is unnecessary).
To fix this, open the per vcpu stats fd on vcpu initialization,
and read from that fd from QEMU's main thread.
Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
There are two RISCV machines where NUMA is aware: 'virt' and 'spike'.
Both of them are required to follow cluster-NUMA-node boundary. To
enable the validation to warn about the irregular configuration where
multiple CPUs in one cluster has been associated with multiple NUMA
nodes.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230509002739.18388-4-gshan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
There are two ARM machines where NUMA is aware: 'virt' and 'sbsa-ref'.
Both of them are required to follow cluster-NUMA-node boundary. To
enable the validation to warn about the irregular configuration where
multiple CPUs in one cluster have been associated with different NUMA
nodes.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230509002739.18388-3-gshan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
For some architectures like ARM64, multiple CPUs in one cluster can be
associated with different NUMA nodes, which is irregular configuration
because we shouldn't have this in baremetal environment. The irregular
configuration causes Linux guest to misbehave, as the following warning
messages indicate.
-smp 6,maxcpus=6,sockets=2,clusters=1,cores=3,threads=1 \
-numa node,nodeid=0,cpus=0-1,memdev=ram0 \
-numa node,nodeid=1,cpus=2-3,memdev=ram1 \
-numa node,nodeid=2,cpus=4-5,memdev=ram2 \
------------[ cut here ]------------
WARNING: CPU: 0 PID: 1 at kernel/sched/topology.c:2271 build_sched_domains+0x284/0x910
Modules linked in:
CPU: 0 PID: 1 Comm: swapper/0 Not tainted 5.14.0-268.el9.aarch64 #1
pstate: 00400005 (nzcv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
pc : build_sched_domains+0x284/0x910
lr : build_sched_domains+0x184/0x910
sp : ffff80000804bd50
x29: ffff80000804bd50 x28: 0000000000000002 x27: 0000000000000000
x26: ffff800009cf9a80 x25: 0000000000000000 x24: ffff800009cbf840
x23: ffff000080325000 x22: ffff0000005df800 x21: ffff80000a4ce508
x20: 0000000000000000 x19: ffff000080324440 x18: 0000000000000014
x17: 00000000388925c0 x16: 000000005386a066 x15: 000000009c10cc2e
x14: 00000000000001c0 x13: 0000000000000001 x12: ffff00007fffb1a0
x11: ffff00007fffb180 x10: ffff80000a4ce508 x9 : 0000000000000041
x8 : ffff80000a4ce500 x7 : ffff80000a4cf920 x6 : 0000000000000001
x5 : 0000000000000001 x4 : 0000000000000007 x3 : 0000000000000002
x2 : 0000000000001000 x1 : ffff80000a4cf928 x0 : 0000000000000001
Call trace:
build_sched_domains+0x284/0x910
sched_init_domains+0xac/0xe0
sched_init_smp+0x48/0xc8
kernel_init_freeable+0x140/0x1ac
kernel_init+0x28/0x140
ret_from_fork+0x10/0x20
Improve the situation to warn when multiple CPUs in one cluster have
been associated with different NUMA nodes. However, one NUMA node is
allowed to be associated with different clusters.
Signed-off-by: Gavin Shan <gshan@redhat.com>
Acked-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <20230509002739.18388-2-gshan@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
event_notifier-posix.c is registered in meson's util_ss[] source
set, which is built as libqemuutil.a.p library. Both tools and
system emulation binaries are linked with qemuutil, so there is
no point in including this source file.
Introduced in commit bd36adb8df ("multi-process: create IOHUB
object to handle irq").
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230606134913.93724-1-philmd@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
In commit b0fcc6fc7fc1 ("build: rebuild build.ninja using
"meson setup --reconfigure"", 2023-05-19) I changed the build.ninja
rule in the Makefile to use "meson setup" so that the Makefile would
pick up a changed path to the meson binary.
However, there was a reason why build.ninja was rebuilt using $(NINJA)
itself. Namely, ninja has its own cache of file modification times,
and if it does not know about the modification that was done outside
its control, it will *also* try to regenerate build.ninja. This can be
simply by running "make" on a fresh tree immediately after "configure";
that will trigger an unnecessary meson run.
So, apply a refinement to the rule in order to cover both cases:
- track the meson binary that was used (and that is embedded in
build.ninja's reconfigure rules); to do this, write build.ninja.stamp
right after executing meson successfully
- if it changed, force usage of "$(MESON) setup --reconfigure" to
update the path in the reconfigure rule
- if it didn't change, use "$(NINJA) build.ninja" just like before
commit b0fcc6fc7fc1.
Reported-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
It's good style to clean up temporary directories when they
are not needed anymore.
Message-Id: <20230622114132.372898-1-thuth@redhat.com>
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230620153720.514882-3-marcandre.lureau@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Rename build directory to "build", like most other CI builds.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230620153720.514882-2-marcandre.lureau@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
In forks QEMU_CI=1 can be used to create a pipeline but not auto-run any
jobs. In upstream jobs always auto-run, which is equiv of QEMU_CI=2.
This supports setting QEMU_CI=1 in upstream, to disable job auto-run.
This can be used to preserve CI minutes if repushing a branch to staging
with a specific fix that only needs testing in limited scenarios.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230608164018.2520330-6-berrange@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
In upstream context we only run pipelines on staging branches, and
limited publishing jobs on the default branch.
We don't want to run pipelines on stable branches, or tags, because
the content will have already been tested on a staging branch before
getting pushed.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230608164018.2520330-5-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
If the stable staging branches publish containers under the 'latest' tag
they will clash with containers published on the primary staging branch,
as well as with each other. This introduces logic that overrides the
container tag when jobs run against the stable staging branches.
The CI_COMMIT_REF_SLUG variable we use expands to the git branch name,
but with most special characters removed, such that it is valid as a
docker tag name. eg 'staging-8.0' will get a slug of 'staging-8-0'
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230608164018.2520330-4-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
The CI rules have special logic for what happens in upstream. To enable
contributors who modify CI rules to test this logic, however, they need
to be able to override which repo is considered upstream. This
introduces the 'QEMU_CI_UPSTREAM' variable
git push gitlab <branch> -o ci.variable=QEMU_CI_UPSTREAM=berrange
to make it look as if my namespace is the actual upstream. Namespace in
this context refers to the path fragment in gitlab URLs that is above
the repository. Typically this will be the contributor's gitlab login
name.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230608164018.2520330-3-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
We use a fixed container tag of 'latest' so that contributors' forks
don't end up with an ever growing number of containers as they work
on throwaway feature branches.
This fixed tag causes problems running CI upstream in stable staging
branches, however, because the stable staging branch will publish old
container content that clashes with that needed by primary staging
branch. This makes it impossible to reliably run CI pipelines in
parallel in upstream for different staging branches.
This introduces $QEMU_CI_CONTAINER_TAG global variable as a way to
change which tag container publishing uses. Initially it can be set
by contributors as a git push option if they want to override the
default use of 'latest' eg
git push gitlab <branch> -o ci.variable=QEMU_CONTAINER_TAG=fish
this is useful if contributors need to run pipelines for different
branches concurrently in their forks.
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230608164018.2520330-2-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
Signed-off-by: Milan Zamazal <mzamazal@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230621101710.297975-4-mzamazal@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
|
|
ppc queue:
* New maintainers
* Nested implementation cleanups
* Various cleanups of the CPU implementation
* SMT support for pseries
* Improvements of the XIVE2 TIMA modeling
* Extra avocado tests for pseries
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmSZKF8ACgkQUaNDx8/7
# 7KGSiBAAlHC4S9J5ujzTIojaWY72d2ZinkC+WpBus9Wr91DqaUSUd/JbzDxQCvXh
# dBWEbcyQ+abb8M3OQ3fMq9TfD2/LhxxXb+uwHIJ+ylITBnsRVCQv/4/gi3EkpRid
# h4q3wYH8OYNfCQd/cWYXNgCSNj1nS9sRrEKFXaB0JeQWHzHxriJS/SoIhilqvUru
# LFEytWNb3bxRkEkt8oAetOa9+DNLowUQ9IdzswqGcib09po3b1k4+ThfcvzU9nAc
# ek31/h1W6cJbOJcgRO2dhWUZYp7cfmcnOa02E84tGFvvY/kYbjzPZZnoniSXD4uf
# YWFCoB3VxUoZ/YKCT/pDKHVdXmLLrfckNbo9vQNEcwmjr8m0Q3d1ewD5O9oNRpgN
# H0QMENfsdojztosOm3KPQ20aqNf1R7rQegYTiWf3B2fKZ6PIqnn3tBPxaEDkH7NC
# GTAKnBhF48lcHSF/4XOfGdmqhGgPRWX/Tv0wia7RY/A4NEfiIImIu+nYSGNBbu3y
# 7xlmtcumTlsRityOZnYI3bN5ubv++XPwU5NIJPACqvAbhif2rf1vQ9rMkkK785GL
# ciJ/5f6zXsLU7DfWP+qbTBizchQgigXnRZEEc7Seo6Bwtru22oxug0qQZ5QCgyXl
# Fg5Xuoq/6T4JC75pvxh1BjVlZc3Okzbfmsj+aZNrXO581HVJ2JI=
# =XLtJ
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 26 Jun 2023 07:55:43 AM CEST
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-ppc-20230626' of https://github.com/legoater/qemu: (30 commits)
tests/avocado: ppc test VOF bios Linux boot
pnv/xive2: Check TIMA special ops against a dedicated array for P10
pnv/xive2: Add a get_config() method on the presenter class
tests/avocado: Add ppc64 pseries multiprocessor boot tests
tests/avocado: boot ppc64 pseries to Linux VFS mount
spapr: TCG allow up to 8-thread SMT on POWER8 and newer CPUs
hw/ppc/spapr: Test whether TCG is enabled with tcg_enabled()
target/ppc: Add msgsnd/p and DPDES SMT support
target/ppc: Add support for SMT CTRL register
target/ppc: Add initial flags and helpers for SMT support
target/ppc: Fix sc instruction handling of LEV field
target/ppc: Better CTRL SPR implementation
target/ppc: Add ISA v3.1 LEV indication in SRR1 for system call interrupts
target/ppc: Implement HEIR SPR
target/ppc: Add SRR1 prefix indication to interrupt handlers
target/ppc: Change partition-scope translate interface
target/ppc: Fix instruction loading endianness in alignment interrupt
ppc/spapr: Move spapr nested HV to a new file
ppc/spapr: load and store l2 state with helper functions
ppc/spapr: Add a nested state struct
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
|
|
VOF is the new lightweight fast pseries bios. Add a Linux boot test
using VOF.
More tests could be moved to use VOF becasue it's much faster, but
just dip one toe in the water first here. SLOF should continue to be
tested too.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
Accessing the TIMA from some specific ring/offset combination can
trigger a special operation, with or without side effects. It is
implemented in qemu with an array of special operations to compare
accesses against. Since the presenter on P10 is pretty similar to P9,
we had the full array defined for P9 and we just had a special case
for P10 to treat one access differently. With a recent change,
6f2cbd133d4 ("pnv/xive2: Handle TIMA access through all ports"), we
now ignore some of the bits of the TIMA address, but that patch
managed to botch the detection of the special case for P10.
To clean that up, this patch introduces a full array of special ops to
be used for P10. The code to detect a special access is common with
P9, only the array of operations differs. The presenter can pick the
correct array of special ops based on its configuration introduced in
a previous patch.
Fixes: Coverity CID 1512997, 1512998
Fixes: 6f2cbd133d4 ("pnv/xive2: Handle TIMA access through all ports")
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
The presenters for xive on P9 and P10 are mostly similar but the
behavior can be tuned through a few CQ registers. This patch adds a
"get_config" method, which will allow to access that config from the
presenter in a later patch.
For now, just define the config for the TIMA version.
Signed-off-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
Add mult-thread/core/socket Linux boot tests that ensure the right
topology comes up. Of particular note is a SMT test, which is a new
capability for TCG.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
This machine can boot Linux to VFS mount, so don't stop in early boot.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
PPC TCG supports SMT CPU configurations for non-hypervisor state, so
permit POWER8-10 pseries machines to enable SMT.
This requires PIR and TIR be set, because that's how sibling thread
matching is done by TCG.
spapr's nested-HV capability does not currently coexist with SMT, so
that combination is prohibited (interestingly somewhat analogous to
LPAR-per-core mode on real hardware which also does not support KVM).
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: Also test smp_threads when checking for POWER8 CPU and above ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
Although the PPC target only supports the TCG and KVM
accelerators, QEMU supports more. We can not assume that
'!kvm == tcg', so test for the correct accelerator. This
also eases code review, because here we don't care about
KVM, we really want to test for TCG.
Reviewed-by: Greg Kurz <groug@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
[np: Fix changelog typo noticed by Zoltan]
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
Doorbells in SMT need to coordinate msgsnd/msgclr and DPDES access from
multiple threads that affect the same state.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
A relatively simple case to begin with, CTRL is a SMT shared register
where reads and writes need to synchronise against state changes by
other threads in the core.
Atomic serialisation operations are used to achieve this.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
TGC SMT emulation needs to know whether it is running with SMT siblings,
to be able to iterate over siblings in a core, and to serialise
threads to access per-core shared SPRs. Add infrastructure to do these
things.
For now the sibling iteration and serialisation are implemented in a
simple but inefficient way. SMT shared state and sibling access is not
too common, and SMT configurations are mainly useful to test system
code, so performance is not to critical.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: fix build breakage with clang ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
The top bits of the LEV field of the sc instruction are to be treated as
as a reserved field rather than a reserved value, meaning LEV is
effectively the bottom bit. LEV=0xF should be treated as LEV=1 and be
a hypercall, for example.
This changes the instruction execution to just set lev from the low bit
of the field. Processors which don't support the LEV field will continue
to ignore it.
ISA v3.1 defines LEV to be 2 bits, in order to add the 'sc 2' ultracall
instruction. TCG does not support Ultravisor, so don't worry about
that bit.
Suggested-by: "Harsh Prateek Bora" <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
The CTRL register is able to write the bit in the RUN field, which gets
reflected into the TS field which is read-only and contains the state of
the RUN field for all threads in the core.
TCG does not implement SMT, so the correct implementation just requires
mirroring the RUN bit into the first bit of the TS field.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
System call interrupts in ISA v3.1 CPUs add a LEV indication in SRR1
that corresponds with the LEV field of the instruction that caused the
interrupt.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
The hypervisor emulation assistance interrupt modifies HEIR to
contain the value of the instruction which caused the exception.
Only TCG raises HEAI interrupts so this can be made TCG-only.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
ISA v3.1 introduced prefix instructions. Among the changes, various
synchronous interrupts report whether they were caused by a prefix
instruction in (H)SRR1.
The case of instruction fetch that causes an HDSI due to access of a
process-scoped table faulting on the partition scoped translation is the
tricky one. As with ISIs and HISIs, this does not try to set the prefix
bit because there is no instruction image to be loaded. The HDSI needs
the originating access type to be passed through to the handler to
distinguish this from HDSIs that fault translating process scoped tables
originating from a load or store instruction (in that case the prefix
bit should be provided).
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
[ clg: checkpatch issues ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
Rather than always performing partition scope page table translation
with access type of 0 (MMU_DATA_LOAD), pass through the processor
access type which first initiated the translation sequence. Process-
scoped page table loads are then set to MMU_DATA_LOAD access type in
the xlate function.
This will allow more information to be passed to the exception
handler in the next patch.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
powerpc ifetch endianness depends on MSR[LE] so it has to byteswap
after cpu_ldl_code(). This corrects DSISR bits in alignment
interrupts when running in little endian mode.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
Create spapr_nested.c for most of the nested HV implementation.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
Arguably this is just shuffling around register accesses, but one nice
thing it does is allow the exit to save away the L2 state then switch
the environment to the L1 before copying L2 data back to the L1, which
logically flows more naturally and simplifies the error paths.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
Rather than use a copy of CPUPPCState to store the host state while
the environment has been switched to the L2, use a new struct for
this purpose.
Have helper functions to save and load this host state.
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
Fix missing env->ca restore when going from L2 back to the host.
Fixes: 120f738a467 ("spapr: implement nested-hv capability for the virtual hypervisor")
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
When the Timer Control and Timer Status registers are modified, avoid
calling the KVM backend when not available
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
The 'bamboo' machine was used as a KVM platform in the early days (~2008).
It clearly doesn't support it anymore.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
The 'prep' machine never supported KVM. This piece of code was
probably inherited from another model.
Cc: Hervé Poussineau <hpoussin@reactos.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
Fred discusses frequently with the IBM HW designers, he is fluent in
XIVE logic, add him as a reviewer.
Cc: Frédéric Barrat <fbarrat@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
Nick has great knowledge of the PowerPC CPUs, software and hardware.
Add him as a reviewer on CPU TCG modeling.
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
Fred and Nick have been hacking baremetal POWER systems (OPAL) for
many years. They use and modify the QEMU models regularly. Add them as
PowerNV reviewers.
Cc: Frédéric Barrat <fbarrat@linux.ibm.com>
Cc: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Acked-by: Frederic Barrat <fbarrat@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
The phb error macros add a newline for you, so remove the second one to
avoid double whitespace.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
|
Make sure each CPU gets its state set up for gdb, not just the ones
before PowerPCCPUClass has had its gdb state set up.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
|
