aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-05-28add support for protocol driver create_optionsMORITA Kazutaka
This patch enables protocol drivers to use their create options which are not supported by the format. For example, protcol drivers can use a backing_file option with raw format. Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-05-28qemu-io: Add multiwrite commandKevin Wolf
The new multiwrite commands allows to use qemu-io for testing bdrv_aio_multiwrite. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-05-28block: Fix multiwrite with overlapping requestsKevin Wolf
With overlapping requests, the total number of sectors is smaller than the sum of the nb_sectors of both requests. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-05-28qcow2: Fix error handling in l2_allocateKevin Wolf
l2_allocate has some intermediate states in which the image is inconsistent. Change the order to write to the L1 table only after the new L2 table has successfully been initialized. Also reset the L2 cache in failure case, it's very likely wrong. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-05-28qcow2: Clear L2 table cache after write errorKevin Wolf
If the L2 table was already updated in cache, but writing it to disk has failed, we must not continue using the changed version in the cache to stay consistent with what's on the disk. Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2010-05-27vhost_net.c: v2 Fix build failure introduced by ↵Jes Sorensen
0bfcd599e3f5c5679cc7d0165a0a1822e2f60de2 Fix build failure introduced by 0bfcd599e3f5c5679cc7d0165a0a1822e2f60de2 The format statement expects unsigned long on x86_64, but receives unsigned long long, so gcc exits with an error. Signed-off-by: Jes Sorensen <Jes.Sorensen@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-27Make cache=unsafe the default for -snapshotAlexander Graf
When using -snapshot we don't care about data integrity of the cow file at all, so let's disable flushing there and squeeze out the last drop of performance we could possibly get. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-05-26sparc64: clean up pci bridge mapIgor V. Kovalenko
- remove unused host state and store pci bus pointer only - do not map host state access into unused 1fe.10000000 range - reorder pci region registration - assign pci i/o region to isa_mem_base Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-26sparc64: rename sun4u cpu to Ultrasparc IIiIgor V. Kovalenko
Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-26Add cache=unsafe parameter to -driveAlexander Graf
Usually the guest can tell the host to flush data to disk. In some cases we don't want to flush though, but try to keep everything in cache. So let's add a new cache value to -drive that allows us to set the cache policy to most aggressive, disabling flushes. We call this mode "unsafe", as guest data is not guaranteed to survive host crashes anymore. This patch also adds a noop function for aio, so we can do nothing in AIO fashion. Signed-off-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-05-24vnc: rich cursor support.Gerd Hoffmann
Uses VNC_ENCODING_RICH_CURSOR. Adding XCURSOR support should be possible without much trouble. Shouldn't be needed though as RICH_CURSOR is a superset of XCURSOR. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-05-24use new cursor struct + functions for vmware vga and sdl.Gerd Hoffmann
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-05-24cursor: add cursor functions.Gerd Hoffmann
Add a new cursor type to console.h and a bunch of functions to deal with cursors the (new) cursor.c file. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-05-24Fix error handling in qemu_read_config_fileKevin Wolf
We need to close the file even in error case. While at it, make the callers catch all kind of errors. ENOENT is allowed for default config files, they are optional. Reported-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-05-24Virtio-net: Replace the hardcode 6 with defined ETN_ALENAmos Kong
hw/virtio-net.h: #define ETH_ALEN 6 ETH_ALEN was defined by commit 7967406801aa897fae83caad3278ac85a342adaa Signed-off-by: Amos Kong <akong@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-05-24sdl: Do not disable screensaver by defaultJan Kiszka
Unless we are running in full-screen mode, QEMU's SDL window should not disable the host's screensaver. The user can still change this behaviour by setting the environment variable SDL_VIDEO_ALLOW_SCREENSAVER as desired. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2010-05-24Merge remote branch 'kwolf/for-anthony' into stagingAnthony Liguori
2010-05-24Merge remote branch 'qmp/for-anthony' into stagingAnthony Liguori
2010-05-24microblaze: Handle new elf mach nr for sysemu.Edgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2010-05-22lsi: Fix value overflow in request tag processingJan Kiszka
This fixes a mismerge of 64d564094cac5f72eeaeb950c442b773a00d3586 (wrong patch version): We need to mask the tag value properly to obtain its device ID. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-05-22sparc64: flush translations on mmu context changeIgor V. Kovalenko
- two pairs of softmmu indexes bind softmmu tlb to cpu tlb in fault handlers using value of DMMU primary and secondary context registers, so we need to flush softmmu translations when context registers are changed Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-22sparc64: fix mmu context at trap levels above zeroIgor V. Kovalenko
- cpu_mmu_index return MMU_NUCLEUS_IDX if trap level is not zero - cpu_get_tb_cpu_state: store trap level and primary context in flags this allows to restart code translation when address translation is changed - stop translation block after writing to pstate and tl registers - stop translation block after writing to alternate space this can be optimized to stop only if address translation can be changed by write operation (e.g. by comparing with MMU ASI values) Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-22sparc64: fix dump_mmu to look for global bit in tte value instead of tagIgor V. Kovalenko
Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-22sparc64: fix pstate privilege bitsIgor V. Kovalenko
- refactor code to handle hpstate only if available for current cpu - conditionally set hypervisor bit in hpstate register - reorder softmmu indices so user accessable ones go first, translation context macros supervisor() and hypervisor() adjusted as well - disable sparcv8 registers for TARGET_SPARC64 - fix cpu_mmu_index to use sparcv9 bits only Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-22sparc64: generate data access exception on RW violationIgor V. Kovalenko
- separate PRIV and PROT handling - DPRINTF_MMU macro to clean up debug code - dump mmu_idx, trap level and mmu context registers along with address translation values Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-22sparc32 protect read-only bits in DMA CSR registersArtyom Tarasenko
On a real hardware changing read-only bits has no effect Use a mask common for SCSI and Ethernet registers. The crucial bit is DMA_INTR, because setting or clearing it may produce spurious interrupts. This patch allows booting Solaris 2.3 Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-22vmstate: fix breakage by 7e72abc382b700a72549e8147bdea413534eeedcTeLeMan
cirrus_post_load() will be executed twice when loading vm states and then the wrong physical memory will be registered. This issue may lead to crash qemu. Signed-off-by: TeLeMan <geleman@gmail.com> Acked-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-22Fix -device help and documentationMarkus Armbruster
Commit 6616b2ad reverted commit 40ea285c. Looks like a mismerge to me. Signed-off-by: Markus Armbruster <armbru@redhat.com> Acked-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-22Fix tarbin Makefile ruleStuart Brady
The 'tarbin' Makefile rule doesn't include qemu-system-sparc64, but should do, now that sparc64-softmmu is in the default target list. The rule attempts to tar up binaries that were not built if a target list was passed to the configure script -- in which case, it will either fail, or otherwise include binaries from previous builds. Fix both problems once and for all by building a list of binaries to include in the tarball, using the list of targets to be built. Signed-off-by: Stuart Brady <sdb@zubnet.me.uk> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-22hxtool: Add syntax error detectionJan Kiszka
Add basic imbalance detection for STEXT/ETEXI. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-22Fix TEXI section mark imbalance in qemu-img-cmd.hxJan Kiszka
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-22Put dependency files in proper subdirJan Kiszka
This seems to resolve subtle breakages of our build system: Dependency files generated for targets like 'dir/foo.o' were saved as 'foo.d'. Now, if there was also a target 'foo.o', one of the dependency file was overwritten. Concrete example: libhw*/macio.o vs. libhw*/ide/macio.o. And this often left a segfaulting build result behind when changing the "wrong" data structures". Fix it by generating proper 'dir/foo.d'. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-22Clean libhw subdirs as wellJan Kiszka
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Acked-by: Paolo Bonzini <pbonzini@redhat.com> Acked-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-22Fix %lld or %llx printf format useBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-22Compile dma only onceBlue Swirl
Use a qemu_irq to request CPU exit. 7 compilations less for the full build. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-22pckbd: improve debuggingBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-22Compile pckbd only onceBlue Swirl
Use a qemu_irq to indicate A20 line changes. Move I/O port 92 to pckbd.c. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2010-05-21linux-user: do not warn for missing pselect6Riku Voipio
Libc will fallback gracefully if pselect6 is not available. Thus put pselect6 to nowarn until the atomicity issues of the original pselect6 patch are dealt with. Signed-off-by: Riku Voipio <riku.voipio@nokia.com> Cc: Michael Casadevall <mcasadevall@ubuntu.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-05-21tcg-ia64: Load GUEST_BASE into a register.Richard Henderson
Saves one bundle per memory operation. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-05-21tcg-ia64: Fix some register usage issues.Richard Henderson
(1) The output registers were not marked call-clobbered, even though they can be modified by called functions. (2) The thread pointer was not marked reserved. (3) R4-R6 are call-saved, but not saved by the prologue. Rather than save them, mark them reserved so that we don't use them. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-05-21tcg-hppa: Load GUEST_BASE as an immediate.Richard Henderson
Now that the prologue is generated after GUEST_BASE is fixed, we can load it as an immediate, and also avoid reserving the register if it isn't necessary. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-05-21tcg: Initialize the prologue after GUEST_BASE is fixed.Richard Henderson
This will allow backends to make intelligent choices about how to implement GUEST_BASE. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-05-21alpha-linux-user: Fix sigprocmask.Richard Henderson
Alpha passes oldset by value in a register, and returns the newset as the return value; as compared to the standard implementation in which both are passed by reference. This requires being able to distinguish negative return values that are not errors. Do this in the same way as the Alpha Linux kernel, by storing a zero in V0 in the implementation of the syscall. At the same time, fix a think-o in the regular sigprocmask path in which we passed the target, rather than the host, HOW value. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-05-21alpha-linux-user: Fix sigsuspend parameters.Richard Henderson
Alpha passes the signal set in a register, not by reference. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-05-21alpha-linux-user: Fix getxpid.Richard Henderson
Put ppid in the second return register. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-05-21alpha-linux-user: Fix pipe return mechanism.Richard Henderson
At the same time, tidy the code wrt MIPS and SH4 which have the same two register return mechanism. Fix confusion between pipe and pipe2 with an explicit flags=0, when the guest will not be using the two register return mechanism. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-05-21alpha-linux-user: Add correct sigaction constants.Richard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-05-21alpha-linux-user: Fix siginfo.si_addr for SIGSEGV and SIGBUS.Richard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-05-21alpha-linux-user: Fix brk error return.Richard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2010-05-21tcg-i386: Nuke trailing whitespace.Richard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-01 00:16:33 +0000