aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2023-05-18migration: Minor control flow simplificationEric Blake
No need to declare a temporary variable. Suggested-by: Juan Quintela <quintela@redhat.com> Fixes: 1df36e8c6289 ("migration: Handle block device inactivation failures better") Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> (cherry picked from commit 5d39f44d7ac5c63f53d4d0900ceba9521bc27e49) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-18migration: Handle block device inactivation failures betterEric Blake
Consider what happens when performing a migration between two host machines connected to an NFS server serving multiple block devices to the guest, when the NFS server becomes unavailable. The migration attempts to inactivate all block devices on the source (a necessary step before the destination can take over); but if the NFS server is non-responsive, the attempt to inactivate can itself fail. When that happens, the destination fails to get the migrated guest (good, because the source wasn't able to flush everything properly): (qemu) qemu-kvm: load of migration failed: Input/output error at which point, our only hope for the guest is for the source to take back control. With the current code base, the host outputs a message, but then appears to resume: (qemu) qemu-kvm: qemu_savevm_state_complete_precopy_non_iterable: bdrv_inactivate_all() failed (-1) (src qemu)info status VM status: running but a second migration attempt now asserts: (src qemu) qemu-kvm: ../block.c:6738: int bdrv_inactivate_recurse(BlockDriverState *): Assertion `!(bs->open_flags & BDRV_O_INACTIVE)' failed. Whether the guest is recoverable on the source after the first failure is debatable, but what we do not want is to have qemu itself fail due to an assertion. It looks like the problem is as follows: In migration.c:migration_completion(), the source sets 'inactivate' to true (since COLO is not enabled), then tries savevm.c:qemu_savevm_state_complete_precopy() with a request to inactivate block devices. In turn, this calls block.c:bdrv_inactivate_all(), which fails when flushing runs up against the non-responsive NFS server. With savevm failing, we are now left in a state where some, but not all, of the block devices have been inactivated; but migration_completion() then jumps to 'fail' rather than 'fail_invalidate' and skips an attempt to reclaim those those disks by calling bdrv_activate_all(). Even if we do attempt to reclaim disks, we aren't taking note of failure there, either. Thus, we have reached a state where the migration engine has forgotten all state about whether a block device is inactive, because we did not set s->block_inactive in enough places; so migration allows the source to reach vm_start() and resume execution, violating the block layer invariant that the guest CPUs should not be restarted while a device is inactive. Note that the code in migration.c:migrate_fd_cancel() will also try to reactivate all block devices if s->block_inactive was set, but because we failed to set that flag after the first failure, the source assumes it has reclaimed all devices, even though it still has remaining inactivated devices and does not try again. Normally, qmp_cont() will also try to reactivate all disks (or correctly fail if the disks are not reclaimable because NFS is not yet back up), but the auto-resumption of the source after a migration failure does not go through qmp_cont(). And because we have left the block layer in an inconsistent state with devices still inactivated, the later migration attempt is hitting the assertion failure. Since it is important to not resume the source with inactive disks, this patch marks s->block_inactive before attempting inactivation, rather than after succeeding, in order to prevent any vm_start() until it has successfully reactivated all devices. See also https://bugzilla.redhat.com/show_bug.cgi?id=2058982 Signed-off-by: Eric Blake <eblake@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Acked-by: Lukas Straub <lukasstraub2@web.de> Tested-by: Lukas Straub <lukasstraub2@web.de> Signed-off-by: Juan Quintela <quintela@redhat.com> (cherry picked from commit 403d18ae384239876764bbfa111d6cc5dcb673d1) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-18linux-user: fix getgroups/setgroups allocationsMichael Tokarev
linux-user getgroups(), setgroups(), getgroups32() and setgroups32() used alloca() to allocate grouplist arrays, with unchecked gidsetsize coming from the "guest". With NGROUPS_MAX being 65536 (linux, and it is common for an application to allocate NGROUPS_MAX for getgroups()), this means a typical allocation is half the megabyte on the stack. Which just overflows stack, which leads to immediate SIGSEGV in actual system getgroups() implementation. An example of such issue is aptitude, eg https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=811087#72 Cap gidsetsize to NGROUPS_MAX (return EINVAL if it is larger than that), and use heap allocation for grouplist instead of alloca(). While at it, fix coding style and make all 4 implementations identical. Try to not impose random limits - for example, allow gidsetsize to be negative for getgroups() - just do not allocate negative-sized grouplist in this case but still do actual getgroups() call. But do not allow negative gidsetsize for setgroups() since its argument is unsigned. Capping by NGROUPS_MAX seems a bit arbitrary, - we can do more, it is not an error if set size will be NGROUPS_MAX+1. But we should not allow integer overflow for the array being allocated. Maybe it is enough to just call g_try_new() and return ENOMEM if it fails. Maybe there's also no need to convert setgroups() since this one is usually smaller and known beforehand (KERN_NGROUPS_MAX is actually 63, - this is apparently a kernel-imposed limit for runtime group set). The patch fixes aptitude segfault mentioned above. Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> Message-Id: <20230409105327.1273372-1-mjt@msgid.tls.msk.ru> Signed-off-by: Laurent Vivier <laurent@vivier.eu> (cherry picked from commit 1e35d327890bdd117a67f79c52e637fb12bb1bf4) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-18linux-user: Fix mips fp64 executables loadingDaniil Kovalev
If a program requires fr1, we should set the FR bit of CP0 control status register and add F64 hardware flag. The corresponding `else if` branch statement is copied from the linux kernel sources (see `arch_check_elf` function in linux/arch/mips/kernel/elf.c). Signed-off-by: Daniil Kovalev <dkovalev@compiler-toolchain-for.me> Reviewed-by: Jiaxun Yang <jiaxun.yang@flygoat.com> Message-Id: <20230404052153.16617-1-dkovalev@compiler-toolchain-for.me> Signed-off-by: Laurent Vivier <laurent@vivier.eu> (cherry picked from commit a0f8d2701b205d9d7986aa555e0566b13dc18fa0) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-18tests/docker: bump the xtensa base to debian:11-slimAlex Bennée
Stretch is going out of support so things like security updates will fail. As the toolchain itself is binary it hopefully won't mind the underlying OS being updated. Message-Id: <20230503091244.1450613-3-alex.bennee@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reported-by: Richard Henderson <richard.henderson@linaro.org> (cherry picked from commit 3217b84f3cd813a7daffc64b26543c313f3a042a) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-17docs/about/emulation: fix typoLizhi Yang
Duplicated word "are". Signed-off-by: Lizhi Yang <sledgeh4w@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230511080119.99018-1-sledgeh4w@gmail.com> Signed-off-by: Thomas Huth <thuth@redhat.com> (cherry picked from commit c70bb9a771d467302d1c7df5c5bd56b48f42716e) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-17util/async-teardown: wire up query-command-line-optionsClaudio Imbrenda
Add new -run-with option with an async-teardown=on|off parameter. It is visible in the output of query-command-line-options QMP command, so it can be discovered and used by libvirt. The option -async-teardown is now redundant, deprecate it. Reported-by: Boris Fiuczynski <fiuczy@linux.ibm.com> Fixes: c891c24b1a ("os-posix: asynchronous teardown for shutdown on Linux") Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Message-Id: <20230505120051.36605-2-imbrenda@linux.ibm.com> [thuth: Add curly braces to fix error with GCC 8.5, fix bug in deprecated.rst] Signed-off-by: Thomas Huth <thuth@redhat.com> (cherry picked from commit 80bd81cadd127c1e2fc784612a52abe392670ba4) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> (Mjt: context tweak in docs/about/deprecated.rst)
2023-05-17s390x/pv: Fix spurious warning with asynchronous teardownClaudio Imbrenda
Kernel commit 292a7d6fca33 ("KVM: s390: pv: fix asynchronous teardown for small VMs") causes the KVM_PV_ASYNC_CLEANUP_PREPARE ioctl to fail if the VM is not larger than 2GiB. QEMU would attempt it and fail, print an error message, and then proceed with a normal teardown. Avoid attempting to use asynchronous teardown altogether when the VM is not larger than 2 GiB. This will avoid triggering the error message and also avoid pointless overhead; normal teardown is fast enough for small VMs. Reported-by: Marc Hartmayer <mhartmay@linux.ibm.com> Fixes: c3a073c610 ("s390x/pv: Add support for asynchronous teardown for reboot") Link: https://lore.kernel.org/all/20230421085036.52511-2-imbrenda@linux.ibm.com/ Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com> Message-Id: <20230510105531.30623-2-imbrenda@linux.ibm.com> Reviewed-by: Thomas Huth <thuth@redhat.com> [thuth: Fix inline function parameter in pv.h] Signed-off-by: Thomas Huth <thuth@redhat.com> (cherry picked from commit 88693ab2a53f2f3d25cb39a7b5034ab391bc5a81) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-17tcg/i386: Set P_REXW in tcg_out_addi_ptrRichard Henderson
The REXW bit must be set to produce a 64-bit pointer result; the bit is disabled in 32-bit mode, so we can do this unconditionally. Fixes: 7d9e1ee424b0 ("tcg/i386: Adjust assert in tcg_out_addi_ptr") Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1592 Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1642 Signed-off-by: Richard Henderson <richard.henderson@linaro.org> (cherry picked from commit 988998503bc6d8c03fbea001a0513e8372fddf28) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-179pfs/xen: Fix segfault on shutdownJason Andryuk
xen_9pfs_free can't use gnttabdev since it is already closed and NULL-ed out when free is called. Do the teardown in _disconnect(). This matches the setup done in _connect(). trace-events are also added for the XenDevOps functions. Signed-off-by: Jason Andryuk <jandryuk@gmail.com> Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> Message-Id: <20230502143722.15613-1-jandryuk@gmail.com> [C.S.: - Remove redundant return in xen_9pfs_free(). - Add comment to trace-events. ] Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com> (cherry picked from commit 92e667f6fd5806a6a705a2a43e572bd9ec6819da) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-17s390x/tcg: Fix LDER instruction formatIlya Leoshkevich
It's RRE, not RXE. Found by running valgrind's none/tests/s390x/bfp-2. Fixes: 86b59624c4aa ("s390x/tcg: Implement LOAD LENGTHENED short HFP to long HFP") Reviewed-by: David Hildenbrand <david@redhat.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Message-Id: <20230511134726.469651-1-iii@linux.ibm.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Thomas Huth <thuth@redhat.com> (cherry picked from commit 970641de01908dd09b569965e78f13842e5854bc) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-16target/s390x: Fix EXECUTE of relative branchesIlya Leoshkevich
Fix a problem similar to the one fixed by commit 703d03a4aaf3 ("target/s390x: Fix EXECUTE of relative long instructions"), but now for relative branches. Reported-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com> Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-Id: <20230426235813.198183-2-iii@linux.ibm.com> Signed-off-by: Thomas Huth <thuth@redhat.com> (cherry picked from commit e8ecdfeb30f087574191cde523e846e023911c8d) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-15tcg: ppc64: Fix mask generation for vextractdmShivaprasad G Bhat
In function do_extractm() the mask is calculated as dup_const(1 << (element_width - 1)). '1' being signed int works fine for MO_8,16,32. For MO_64, on PPC64 host this ends up becoming 0 on compilation. The vextractdm uses MO_64, and it ends up having mask as 0. Explicitly use 1ULL instead of signed int 1 like its used everywhere else. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1536 Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Lucas Mateus Castro <lucas.araujo@eldorado.org.br> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Cédric Le Goater <clg@redhat.com> Message-Id: <168319292809.1159309.5817546227121323288.stgit@ltc-boston1.aus.stglabs.ibm.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> (cherry picked from commit 6a5d81b17201ab8a95539bad94c8a6c08a42e076) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-15async: Suppress GCC13 false positive in aio_bh_poll()Cédric Le Goater
GCC13 reports an error : ../util/async.c: In function ‘aio_bh_poll’: include/qemu/queue.h:303:22: error: storing the address of local variable ‘slice’ in ‘*ctx.bh_slice_list.sqh_last’ [-Werror=dangling-pointer=] 303 | (head)->sqh_last = &(elm)->field.sqe_next; \ | ~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~ ../util/async.c:169:5: note: in expansion of macro ‘QSIMPLEQ_INSERT_TAIL’ 169 | QSIMPLEQ_INSERT_TAIL(&ctx->bh_slice_list, &slice, next); | ^~~~~~~~~~~~~~~~~~~~ ../util/async.c:161:17: note: ‘slice’ declared here 161 | BHListSlice slice; | ^~~~~ ../util/async.c:161:17: note: ‘ctx’ declared here But the local variable 'slice' is removed from the global context list in following loop of the same routine. Add a pragma to silent GCC. Cc: Stefan Hajnoczi <stefanha@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Cc: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Cédric Le Goater <clg@redhat.com> Reviewed-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Tested-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <20230420202939.1982044-1-clg@kaod.org> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> (cherry picked from commit d66ba6dc1cce914673bd8a89fca30a7715ea70d1) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru> (Mjt: cherry-picked to stable-8.0 to eliminate CI failures on win*)
2023-05-14target/arm: Correct AArch64.S2MinTxSZ 32-bit EL1 input size checkPeter Maydell
In check_s2_mmu_setup() we have a check that is attempting to implement the part of AArch64.S2MinTxSZ that is specific to when EL1 is AArch32: if !s1aarch64 then // EL1 is AArch32 min_txsz = Min(min_txsz, 24); Unfortunately we got this wrong in two ways: (1) The minimum txsz corresponds to a maximum inputsize, but we got the sense of the comparison wrong and were faulting for all inputsizes less than 40 bits (2) We try to implement this as an extra check that happens after we've done the same txsz checks we would do for an AArch64 EL1, but in fact the pseudocode is *loosening* the requirements, so that txsz values that would fault for an AArch64 EL1 do not fault for AArch32 EL1, because it does Min(old_min, 24), not Max(old_min, 24). You can see this also in the text of the Arm ARM in table D8-8, which shows that where the implemented PA size is less than 40 bits an AArch32 EL1 is still OK with a configured stage2 T0SZ for a 40 bit IPA, whereas if EL1 is AArch64 then the T0SZ must be big enough to constrain the IPA to the implemented PA size. Because of part (2), we can't do this as a separate check, but have to integrate it into aa64_va_parameters(). Add a new argument to that function to indicate that EL1 is 32-bit. All the existing callsites except the one in get_phys_addr_lpae() can pass 'false', because they are either doing a lookup for a stage 1 regime or else they don't care about the tsz/tsz_oob fields. Cc: qemu-stable@nongnu.org Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1627 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230509092059.3176487-1-peter.maydell@linaro.org (cherry picked from commit 478dccbb99db0bf8f00537dd0b4d0de88d5cb537) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-14ui: Fix pixel colour channel order for PNG screenshotsPeter Maydell
When we take a PNG screenshot the ordering of the colour channels in the data is not correct, resulting in the image having weird colouring compared to the actual display. (Specifically, on a little-endian host the blue and red channels are swapped; on big-endian everything is wrong.) This happens because the pixman idea of the pixel data and the libpng idea differ. PIXMAN_a8r8g8b8 defines that pixels are 32-bit values, with A in bits 24-31, R in bits 16-23, G in bits 8-15 and B in bits 0-7. This means that on little-endian systems the bytes in memory are B G R A and on big-endian systems they are A R G B libpng, on the other hand, thinks of pixels as being a series of values for each channel, so its format PNG_COLOR_TYPE_RGB_ALPHA always wants bytes in the order R G B A This isn't the same as the pixman order for either big or little endian hosts. The alpha channel is also unnecessary bulk in the output PNG file, because there is no alpha information in a screenshot. To handle the endianness issue, we already define in ui/qemu-pixman.h various PIXMAN_BE_* and PIXMAN_LE_* values that give consistent byte-order pixel channel formats. So we can use PIXMAN_BE_r8g8b8 and PNG_COLOR_TYPE_RGB, which both have an in-memory byte order of R G B and 3 bytes per pixel. (PPM format screenshots get this right; they already use the PIXMAN_BE_r8g8b8 format.) Cc: qemu-stable@nongnu.org Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1622 Fixes: 9a0a119a382867 ("Added parameter to take screenshot with screendump as PNG") Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-id: 20230502135548.2451309-1-peter.maydell@linaro.org (cherry picked from commit cd22a0f520f471e3bd33bc19cf3b2fa772cdb2a8) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-14target/arm: Fix handling of SW and NSW bits for stage 2 walksPeter Maydell
We currently don't correctly handle the VSTCR_EL2.SW and VTCR_EL2.NSW configuration bits. These allow configuration of whether the stage 2 page table walks for Secure IPA and NonSecure IPA should do their descriptor reads from Secure or NonSecure physical addresses. (This is separate from how the translation table base address and other parameters are set: an NS IPA always uses VTTBR_EL2 and VTCR_EL2 for its base address and walk parameters, regardless of the NSW bit, and similarly for Secure.) Provide a new function ptw_idx_for_stage_2() which returns the MMU index to use for descriptor reads, and use it to set up the .in_ptw_idx wherever we call get_phys_addr_lpae(). For a stage 2 walk, wherever we call get_phys_addr_lpae(): * .in_ptw_idx should be ptw_idx_for_stage_2() of the .in_mmu_idx * .in_secure should be true if .in_mmu_idx is Stage2_S This allows us to correct S1_ptw_translate() so that it consistently always sets its (out_secure, out_phys) to the result it gets from the S2 walk (either by calling get_phys_addr_lpae() or by TLB lookup). This makes better conceptual sense because the S2 walk should return us an (address space, address) tuple, not an address that we then randomly assign to S or NS. Our previous handling of SW and NSW was broken, so guest code trying to use these bits to put the s2 page tables in the "other" address space wouldn't work correctly. Cc: qemu-stable@nongnu.org Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1600 Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230504135425.2748672-3-peter.maydell@linaro.org (cherry picked from commit fcc0b0418fff655f20fd0cf86a1bbdc41fd2e7c6) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-11accel/tcg: Fix atomic_mmu_lookup for readsRichard Henderson
A copy-paste bug had us looking at the victim cache for writes. Cc: qemu-stable@nongnu.org Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> Fixes: 08dff435e2 ("tcg: Probe the proper permissions for atomic ops") Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20230505204049.352469-1-richard.henderson@linaro.org> (cherry picked from commit 8c313254e61ed47a1bf4a2db714b25cdd94fbcce) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-10hw/pci-bridge: pci_expander_bridge fix type in pxb_cxl_dev_reset()Jonathan Cameron
Reproduce issue with configure --enable-qom-cast-debug ... qemu-system-x86_64 -display none -machine q35,cxl=on -device pxb-cxl,bus=pcie.0 hw/pci-bridge/pci_expander_bridge.c:54:PXB_DEV: Object 0x5570e0b1ada0 is not an instance of type pxb Aborted The type conversion results in the right state structure, but PXB_DEV is not a parent of PXB_CXL_DEV hence the error. Rather than directly cleaning up the inheritance, this is the minimal fix which will be followed by the cleanup. Fixes: 154070eaf6 ("hw/pxb-cxl: Support passthrough HDM Decoders unless overridden") Reported-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Message-Id: <20230420142750.6950-2-Jonathan.Cameron@huawei.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Cc: qemu-stable@nongnu.org Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> (cherry picked from commit 9136f661c7277777a2f85a7e98438f4fe6472fdc) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-10target/riscv: Restore the predicate() NULL check behaviorBin Meng
When reading a non-existent CSR QEMU should raise illegal instruction exception, but currently it just exits due to the g_assert() check. This actually reverts commit 0ee342256af9205e7388efdf193a6d8f1ba1a617. Some comments are also added to indicate that predicate() must be provided for an implemented CSR. Reported-by: Fei Wu <fei2.wu@intel.com> Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Message-Id: <20230417043054.3125614-1-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> (cherry picked from commit eae04c4c131a8d95087c8568eb2cac1988262f25) (mjt: context edit after ce3af0bbbcdfa "target/riscv: add support for Zcmt extension") Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-10target/riscv: Fix itrigger when icount is usedLIU Zhiwei
When I boot a ubuntu image, QEMU output a "Bad icount read" message and exit. The reason is that when execute helper_mret or helper_sret, it will cause a call to icount_get_raw_locked (), which needs set can_do_io flag on cpustate. Thus we setting this flag when execute these two instructions. Signed-off-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Weiwei Li <liweiwei@iscas.ac.cn> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230324064011.976-1-zhiwei_liu@linux.alibaba.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> (cherry picked from commit df3ac6da476e346a17bad5bc843de1135a269229) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-10block: Don't call no_coroutine_fns in qmp_block_resize()Kevin Wolf
This QMP handler runs in a coroutine, so it must use the corresponding no_co_wrappers instead. Fixes: https://bugzilla.redhat.com/show_bug.cgi?id=2185688 Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20230504115750.54437-5-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> (cherry picked from commit 0c7d204f50c382c6baac8c94bd57af4a022b3888) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-10block: bdrv/blk_co_unref() for calls in coroutine contextKevin Wolf
These functions must not be called in coroutine context, because they need write access to the graph. Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20230504115750.54437-4-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> (cherry picked from commit b2ab5f545fa1eaaf2955dd617bee19a8b3279786) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-10block: Consistently call bdrv_activate() outside coroutineKevin Wolf
Migration code can call bdrv_activate() in coroutine context, whereas other callers call it outside of coroutines. As it calls other code that is not supposed to run in coroutines, standardise on running outside of coroutines. This adds a no_co_wrapper to switch to the main loop before calling bdrv_activate(). Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Message-Id: <20230504115750.54437-3-kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> (cherry picked from commit da4afaff074e56b0fa0d25abf865784148018895) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-10block: Fix use after free in blockdev_mark_auto_del()Kevin Wolf
job_cancel_locked() drops the job list lock temporarily and it may call aio_poll(). We must assume that the list has changed after this call. Also, with unlucky timing, it can end up freeing the job during job_completed_txn_abort_locked(), making the job pointer invalid, too. For both reasons, we can't just continue at block_job_next_locked(job). Instead, start at the head of the list again after job_cancel_locked() and skip those jobs that we already cancelled (or that are completing anyway). Cc: qemu-stable@nongnu.org Signed-off-by: Kevin Wolf <kwolf@redhat.com> Message-Id: <20230503140142.474404-1-kwolf@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> (cherry picked from commit e2626874a32602d4e52971c786ef5ffb4430629d) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-10meson: leave unnecessary modules out of the buildPaolo Bonzini
meson.build files choose whether to build modules based on foo.found() expressions. If a feature is enabled (e.g. --enable-gtk), these expressions are true even if the code is not used by any emulator, and this results in an unexpected difference between modular and non-modular builds. For non-modular builds, the files are not included in any binary, and therefore the source files are never processed. For modular builds, however, all .so files are unconditionally built by default, and therefore a normal "make" tries to build them. However, the corresponding trace-*.h files are absent due to this conditional: if have_system trace_events_subdirs += [ ... 'ui', ... ] endif which was added to avoid wasting time running tracetool on unused trace-events files. This causes a compilation failure; fix it by skipping module builds entirely if (depending on the module directory) have_block or have_system are false. Reported-by: Michael Tokarev <mjt@tls.msk.ru> Cc: qemu-stable@nongnu.org Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> (cherry picked from commit ef709860ea12ec59c4cd7373bd2fd7a4e50143ee) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-10softfloat: Fix the incorrect computation in float32_exp2Shivaprasad G Bhat
The float32_exp2 function is computing wrong exponent of 2. For example, with the following set of values {0.1, 2.0, 2.0, -1.0}, the expected output would be {1.071773, 4.000000, 4.000000, 0.500000}. Instead, the function is computing {1.119102, 3.382044, 3.382044, -0.191022} Looking at the code, the float32_exp2() attempts to do this 2 3 4 5 n x x x x x x x e = 1 + --- + --- + --- + --- + --- + ... + --- + ... 1! 2! 3! 4! 5! n! But because of the typo it ends up doing x x x x x x x e = 1 + --- + --- + --- + --- + --- + ... + --- + ... 1! 2! 3! 4! 5! n! This is because instead of the xnp which holds the numerator, parts_muladd is using the xp which is just 'x'. Commit '572c4d862ff2' refactored this function, and mistakenly used xp instead of xnp. Cc: qemu-stable@nongnu.org Fixes: 572c4d862ff2 "softfloat: Convert float32_exp2 to FloatParts" Partially-Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1623 Reported-By: Luca Barbato (https://gitlab.com/lu-zero) Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com> Signed-off-by: Vaibhav Jain <vaibhav@linux.ibm.com> Message-Id: <168304110865.537992.13059030916325018670.stgit@localhost.localdomain> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Signed-off-by: Richard Henderson <richard.henderson@linaro.org> (cherry picked from commit 1098cc3fcf952763fc9fd72c1c8fda30a18cc8ea) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-10block/export: call blk_set_dev_ops(blk, NULL, NULL)Stefan Hajnoczi
Most export types install BlockDeviceOps pointers. It is easy to forget to remove them because that happens automatically via the "drive" qdev property in hw/ but not block/export/. Put blk_set_dev_ops(blk, NULL, NULL) calls in the core export.c code so the export types don't need to remember. This fixes the nbd and vhost-user-blk export types. Fixes: fd6afc501a01 ("nbd/server: Use drained block ops to quiesce the server") Fixes: ca858a5fe94c ("vhost-user-blk-server: notify client about disk resize") Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Message-Id: <20230502211119.720647-1-stefanha@redhat.com> Signed-off-by: Eric Blake <eblake@redhat.com> (cherry picked from commit de79b52604e43fdeba6cee4f5af600b62169f2d2) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-10hw/net/allwinner-sun8i-emac: Correctly byteswap descriptor fieldsPeter Maydell
In allwinner-sun8i-emac we just read directly from guest memory into a host FrameDescriptor struct and back. This only works on little-endian hosts. Reading and writing of descriptors is already abstracted into functions; make those functions also handle the byte-swapping so that TransferDescriptor structs as seen by the rest of the code are always in host-order, and fix two places that were doing ad-hoc descriptor reading without using the functions. Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230424165053.1428857-3-peter.maydell@linaro.org (cherry picked from commit a4ae17e5ec512862bf73e40dfbb1e7db71f2c1e7) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-10hw/sd/allwinner-sdhost: Correctly byteswap descriptor fieldsPeter Maydell
In allwinner_sdhost_process_desc() we just read directly from guest memory into a host TransferDescriptor struct and back. This only works on little-endian hosts. Abstract the reading and writing of descriptors into functions that handle the byte-swapping so that TransferDescriptor structs as seen by the rest of the code are always in host-order. This fixes a failure of one of the avocado tests on s390. Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230424165053.1428857-2-peter.maydell@linaro.org (cherry picked from commit 3e20d90824c262de6887aa1bc52af94db69e4310) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-10target/arm: Define and use new load_cpu_field_low32()Peter Maydell
In several places in the 32-bit Arm translate.c, we try to use load_cpu_field() to load from a CPUARMState field into a TCGv_i32 where the field is actually 64-bit. This works on little-endian hosts, but gives the wrong half of the register on big-endian. Add a new load_cpu_field_low32() which loads the low 32 bits of a 64-bit field into a TCGv_i32. The new macro includes a compile-time check against accidentally using it on a field of the wrong size. Use it to fix the two places in the code where we were using load_cpu_field() on a 64-bit field. This fixes a bug where on big-endian hosts the guest would crash after executing an ERET instruction, and a more corner case one where some UNDEFs for attempted accesses to MSR banked registers from Secure EL1 might go to the wrong EL. Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 20230424153909.1419369-2-peter.maydell@linaro.org (cherry picked from commit 7f3a3d3dc433dc06c0adb480729af80f9c8e3739) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-10hw/intc/allwinner-a10-pic: Don't use set_bit()/clear_bit()Peter Maydell
The Allwinner PIC model uses set_bit() and clear_bit() to update the values in its irq_pending[] array when an interrupt arrives. However it is using these functions wrongly: they work on an array of type 'long', and it is passing an array of type 'uint32_t'. Because the code manually figures out the right array element, this works on little-endian hosts and on 32-bit big-endian hosts, where bits 0..31 in a 'long' are in the same place as they are in a 'uint32_t'. However it breaks on 64-bit big-endian hosts. Remove the use of set_bit() and clear_bit() in favour of using deposit32() on the array element. This fixes a bug where on big-endian 64-bit hosts the guest kernel would hang early on in bootup. Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230424152833.1334136-1-peter.maydell@linaro.org (cherry picked from commit 2c5fa0778c3b4307f9f3af7f27886c46d129c62f) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-10hw/arm/raspi: Use arm_write_bootloader() to write boot codePeter Maydell
When writing the secondary-CPU stub boot loader code to the guest, use arm_write_bootloader() instead of directly calling rom_add_blob_fixed(). This fixes a bug on big-endian hosts, because arm_write_bootloader() will correctly byte-swap the host-byte-order array values into the guest-byte-order to write into the guest memory. Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Tested-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-id: 20230424152717.1333930-4-peter.maydell@linaro.org (cherry picked from commit 0acbdb4c4ab6b0a09f159bae4899b0737cf64242) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-10hw/arm/aspeed: Use arm_write_bootloader() to write the bootloaderCédric Le Goater
When writing the secondary-CPU stub boot loader code to the guest, use arm_write_bootloader() instead of directly calling rom_add_blob_fixed(). This fixes a bug on big-endian hosts, because arm_write_bootloader() will correctly byte-swap the host-byte-order array values into the guest-byte-order to write into the guest memory. Cc: qemu-stable@nongnu.org Signed-off-by: Cédric Le Goater <clg@kaod.org> Tested-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230424152717.1333930-3-peter.maydell@linaro.org [PMM: Moved the "make arm_write_bootloader() function public" part to its own patch; updated commit message to note that this fixes an actual bug; adjust to the API changes noted in previous commit] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> (cherry picked from commit 902bba549fc386b4b9805320ed1a2e5b68478bdd) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-10hw/arm/boot: Make write_bootloader() public as arm_write_bootloader()Cédric Le Goater
The arm boot.c code includes a utility function write_bootloader() which assists in writing a boot-code fragment into guest memory, including handling endianness and fixing it up with entry point addresses and similar things. This is useful not just for the boot.c code but also in board model code, so rename it to arm_write_bootloader() and make it globally visible. Since we are making it public, make its API a little neater: move the AddressSpace* argument to be next to the hwaddr argument, and allow the fixupcontext array to be const, since we never modify it in this function. Cc: qemu-stable@nongnu.org Signed-off-by: Cédric Le Goater <clg@kaod.org> Tested-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Message-id: 20230424152717.1333930-2-peter.maydell@linaro.org [PMM: Split out from another patch by Cédric, added doc comment] Signed-off-by: Peter Maydell <peter.maydell@linaro.org> (cherry picked from commit 0fe43f0abf19bbe24df3dbf0613bb47ed55f1482) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-10hw/net/msf2-emac: Don't modify descriptor in-place in emac_store_desc()Peter Maydell
The msf2-emac ethernet controller has functions emac_load_desc() and emac_store_desc() which read and write the in-memory descriptor blocks and handle conversion between guest and host endianness. As currently written, emac_store_desc() does the endianness conversion in-place; this means that it effectively consumes the input EmacDesc struct, because on a big-endian host the fields will be overwritten with the little-endian versions of their values. Unfortunately, in all the callsites the code continues to access fields in the EmacDesc struct after it has called emac_store_desc() -- specifically, it looks at the d.next field. The effect of this is that on a big-endian host networking doesn't work because the address of the next descriptor is corrupted. We could fix this by making the callsite avoid using the struct; but it's more robust to have emac_store_desc() leave its input alone. (emac_load_desc() also does an in-place conversion, but here this is fine, because the function is supposed to be initializing the struct.) Cc: qemu-stable@nongnu.org Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Message-id: 20230424151919.1333299-1-peter.maydell@linaro.org (cherry picked from commit d565f58b38424e9a390a7ea33ff7477bab693fda) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-10target/arm: Initialize debug capabilities only onceAkihiko Odaki
kvm_arm_init_debug() used to be called several times on a SMP system as kvm_arch_init_vcpu() calls it. Move the call to kvm_arch_init() to make sure it will be called only once; otherwise it will overwrite pointers to memory allocated with the previous call and leak it. Fixes: e4482ab7e3 ("target-arm: kvm - add support for HW assisted debug") Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com> Message-id: 20230405153644.25300-1-akihiko.odaki@daynix.com Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> (cherry picked from commit ad5c6ddea327758daa9f0e6edd916be39dce7dca) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-10docs/about/deprecated.rst: Add "since 7.1" tag to dtb-kaslr-seed deprecationPeter Maydell
In commit 5242876f37ca we deprecated the dtb-kaslr-seed property of the virt board, but forgot the "since n.n" tag in the documentation of this in deprecated.rst. This deprecation note first appeared in the 7.1 release, so retrospectively add the correct "since 7.1" annotation to it. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alex Bennée <alex.bennee@linaro.org> Message-id: 20230420122256.1023709-1-peter.maydell@linaro.org (cherry picked from commit ac64ebbecf80f6bc764d120f85fe9fa28fbd9e85) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-10qemu-options: finesse the recommendations around -blockdevAlex Bennée
We are a bit premature in recommending -blockdev/-device as the best way to configure block devices. It seems there are times the more human friendly -drive still makes sense especially when -snapshot is involved. Improve the language to hopefully make things clearer. Suggested-by: Michael Tokarev <mjt@tls.msk.ru> Signed-off-by: Alex Bennée <alex.bennee@linaro.org> Reviewed-by: Thomas Huth <thuth@redhat.com> Cc: Markus Armbruster <armbru@redhat.com> Cc: Kevin Wolf <kwolf@redhat.com> Message-Id: <20230424092249.58552-7-alex.bennee@linaro.org> (cherry picked from commit c1654c3e37c31fb638597efedcd07d071837b78b) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-10block/monitor: Fix crash when executing HMP commitWang Liang
hmp_commit() calls blk_is_available() from a non-coroutine context (and in the main loop). blk_is_available() is a co_wrapper_mixed_bdrv_rdlock function, and in the non-coroutine context it calls AIO_WAIT_WHILE(), which crashes if the aio_context lock is not taken before. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1615 Signed-off-by: Wang Liang <wangliangzz@inspur.com> Message-Id: <20230424103902.45265-1-wangliangzz@126.com> Reviewed-by: Emanuele Giuseppe Esposito <eesposit@redhat.com> Reviewed-by: Kevin Wolf <kwolf@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com> (cherry picked from commit 8c1e8fb2e7fc2cbeb57703e143965a4cd3ad301a) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-05-10acpi: pcihp: allow repeating hot-unplug requestsIgor Mammedov
with Q35 using ACPI PCI hotplug by default, user's request to unplug device is ignored when it's issued before guest OS has been booted. And any additional attempt to request device hot-unplug afterwards results in following error: "Device XYZ is already in the process of unplug" arguably it can be considered as a regression introduced by [2], before which it was possible to issue unplug request multiple times. Accept new uplug requests after timeout (1ms). This brings ACPI PCI hotplug on par with native PCIe unplug behavior [1] and allows user to repeat unplug requests at propper times. Set expire timeout to arbitrary 1msec so user won't be able to flood guest with SCI interrupts by calling device_del in tight loop. PS: ACPI spec doesn't mandate what OSPM can do with GPEx.status bits set before it's booted => it's impl. depended. Status bits may be retained (I tested with one Windows version) or cleared (Linux since 2.6 kernel times) during guest's ACPI subsystem initialization. Clearing status bits (though not wrong per se) hides the unplug event from guest, and it's upto user to repeat device_del later when guest is able to handle unplug requests. 1) 18416c62e3 ("pcie: expire pending delete") 2) Fixes: cce8944cc9ef ("qdev-monitor: Forbid repeated device_del") Signed-off-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Gerd Hoffmann <kraxel@redhat.com> CC: mst@redhat.com CC: anisinha@redhat.com CC: jusual@redhat.com CC: kraxel@redhat.com Message-Id: <20230418090449.2155757-1-imammedo@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Ani Sinha <anisinha@redhat.com> (cherry picked from commit 0f689cf5ada4d5df5ab95c7f7aa9fc221afa855d) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-04-27hw/timer/imx_epit: fix limit checkAxel Heider
Fix the limit check. If the limit is less than the compare value, the timer can never reach this value, thus it will never fire. Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1491 Signed-off-by: Axel Heider <axel.heider@hensoldt.net> Message-id: 168070611775.20412.2883242077302841473-2@git.sr.ht Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> (cherry picked from commit 25d758175dfbfd53e02b4a52ac68cbd6eb05f648) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-04-27hw/timer/imx_epit: don't shadow variableAxel Heider
Fix issue reported by Coverity. Signed-off-by: Axel Heider <axel.heider@hensoldt.net> Message-id: 168070611775.20412.2883242077302841473-1@git.sr.ht Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> (cherry picked from commit 542fd43d79327dabe62e49ff584ca60b6184923a) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-04-27target/i386: Change wrong XFRM value in SGX CPUID leafYang Zhong
The previous patch wrongly replaced FEAT_XSAVE_XCR0_{LO|HI} with FEAT_XSAVE_XSS_{LO|HI} in CPUID(EAX=12,ECX=1):{ECX,EDX}. As a result, SGX enclaves only supported SSE and x87 feature (xfrm=0x3). Fixes: 301e90675c3f ("target/i386: Enable support for XSAVES based features") Signed-off-by: Yang Zhong <yang.zhong@linux.intel.com> Reviewed-by: Yang Weijiang <weijiang.yang@intel.com> Reviewed-by: Kai Huang <kai.huang@intel.com> Message-Id: <20230406064041.420039-1-yang.zhong@linux.intel.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> (cherry picked from commit 72497cff896fecf74306ed33626c30e43633cdd6) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-04-26vnc: avoid underflow when accessing user-provided addressPaolo Bonzini
If hostlen is zero, there is a possibility that addrstr[hostlen - 1] underflows and, if a closing bracked is there, hostlen - 2 is passed to g_strndup() on the next line. If websocket==false then addrstr[0] would be a colon, but if websocket==true this could in principle happen. Fix it by checking hostlen. Reported by Coverity. Signed-off-by: Paolo Bonzini <pbonzini@redhat.com> (cherry picked from commit 3f9c41c5df9617510d8533cf6588172efb3df34b) Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
2023-04-19Update version for v8.0.0 releasev8.0.0Peter Maydell
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-04-13Update version for v8.0.0-rc4 releasev8.0.0-rc4Peter Maydell
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-04-13Merge tag 'migration-20230412-pull-request' of ↵Peter Maydell
https://gitlab.com/juan.quintela/qemu into staging Migration Pull request for 8.0 Last patches found: - peter xu preempt channel fixes. needed for backward compatibility with old machine types. - lukas fix to get compress working again. - fix ram on s390x. Get back to the old code, even when it shouldn't be needed, but as it fails on s390x, just revert. Later, Juan. # -----BEGIN PGP SIGNATURE----- # # iQIzBAABCAAdFiEEGJn/jt6/WMzuA0uC9IfvGFhy1yMFAmQ3HgQACgkQ9IfvGFhy # 1yPXGQ/+Pf6HepNUlIr7naYOcpRriXPQF+q1zqo74F9fy2vrGcwJOI6qmRTjsX4E # 9KgXipOz7+b5wSemF7PDKcnBiwyt6UHCH+XXe0h4TpyuORbtABKRgtOhA1/sa84D # HnKp0TwImpAO26tzPa7u49aau/EEVBKAzFVcyn4w56S9qiDWicOpd5kG0CJBIsMJ # Mnvy5fXaqQRewnKiwFoJGWfyhzEToDO6Z/SkT5xYON94P+eiM2xMwXOC5WcGfmY7 # wFGDB+SuyEP8TTn7mV0mmnlFjYe4G07hVARHSDFX3ho4b6q5F+WzfW095G6QKiu9 # n3Pzr7IBGX3sgetPtYwOwGsE9JrfHMFzBRxQZZwq5GSmjk7+agkbXmV7RyV82EYs # KYOhuNF91ca0qvCrGA/eGbbJqVrd7SR5FhS4SQ7oKd5n2au/ZHoKwAgm5lBdcvES # 2TB0MBN1s0JPh6KMV8tPB2miZyqPRa++oA8qIX7Asoe1X4xVT1FwiDaFL8TO8i2A # 7uBis3KLZqOHC6dAiXlCDtaADAWgQxjcdoS1l8jTF6MgBSe+zQhXG+pcIDuSiV9N # WfDiUPY97iqPTvpzdz3Is+LbBax2uY5ZR05KSdmCBpIgfvSWMqXtwRydclt6G5h7 # ZiOcTwrgMpXdbhdsFZTqVWAJG2sTkj4TA+IezVpXzPeQNLZ+T8k= # =kW3P # -----END PGP SIGNATURE----- # gpg: Signature made Wed 12 Apr 2023 22:09:24 BST # gpg: using RSA key 1899FF8EDEBF58CCEE034B82F487EF185872D723 # gpg: Good signature from "Juan Quintela <quintela@redhat.com>" [full] # gpg: aka "Juan Quintela <quintela@trasno.org>" [full] # Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723 * tag 'migration-20230412-pull-request' of https://gitlab.com/juan.quintela/qemu: migration: fix ram_state_pending_exact() migration/ram.c: Fix migration with compress enabled migration: Recover behavior of preempt channel creation for pre-7.2 migration: Fix potential race on postcopy_qemufile_src io: tls: Inherit QIO_CHANNEL_FEATURE_SHUTDOWN on server side Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-04-13hw/xen: Fix double-free in xen_console store_con_info()David Woodhouse
Coverity spotted a double-free (CID 1508254); we g_string_free(path) and then for some reason immediately call free(path) too. We should just use g_autoptr() for it anyway, which simplifies the code a bit. Fixes: 7a8a749da7d3 ("hw/xen: Move xenstore_store_pv_console_info to xen_console.c") Signed-off-by: David Woodhouse <dwmw@amazon.co.uk> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2023-04-12migration: fix ram_state_pending_exact()Juan Quintela
I removed that bit on commit: commit c8df4a7aeffcb46020f610526eea621fa5b0cd47 Author: Juan Quintela <quintela@redhat.com> Date: Mon Oct 3 02:00:03 2022 +0200 migration: Split save_live_pending() into state_pending_* Fixes: c8df4a7aeffcb46020f610526eea621fa5b0cd47 Suggested-by: Nina Schoetterl-Glausch <nsg@linux.ibm.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-03-14 20:59:54 +0000