aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-12-13target-alpha: Implement missing MVI instructions.Richard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-13target-mips: fix user-mode emulation startupNathan Froyd
Running programs with the MIPS user-mode emulator fails during dynamic loading, as floating-point instructions are not enabled in in env->hflags. Move the code for doing so from fpu_init to cpu_reset so the MIPS_HFLAG_{FPU,F64} setting doesn't get clobbered by cpu_reset setting env->hflags to MIPS_HFLAG_UM. The same end can be achieved by swapping the ordering of fpu_init and cpu_reset in cpu_mips_init, but it seemed better to consolidate the CONFIG_USER_ONLY code into a single location. Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-13target-i386: Update CPUID feature set for TCGAndre Przywara
The CPUID features QEMU presented to the guest were not up-to-date with QEMU's emulated feature set. Add the missing bits of recent (and not so recent) additions to QEMU's emulation engine. For stability reasons only the user mode usable bits are exposed for now, features like Monitor or CR8LEG are left out. Signed-off-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-13target-alpha: Fixes for alpha-linux syscalls.Richard Henderson
1. Add correct definitions of error numbers. 2. Implement SYS_osf_sigprocmask 3. Implement SYS_osf_get/setsysinfo for IEEE_FP_CONTROL. This last requires exposing the FPCR value to do_syscall. Since this value is actually split up into the float_status, expose routines from helper.c to access it. Finally, also add a float_exception_mask field to float_status. We don't actually use it to control delivery of exceptions to the emulator yet, but simply hold the value that we placed there when loading/storing the FPCR. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-13target-alpha: Enable softfloat.Richard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-13target-alpha: Honor the -cpu command line argument.Richard Henderson
Also change the default cpu to ev67. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-13target-alpha: Remove bogus DO_TB_FLUSH code from translator.Richard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-13target-alpha: Add binfmt entry.Richard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-13target-alpha: Drop bogus UNIQ initial value on Linux.Richard Henderson
Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-13target-mips: set Config1.CA for MIPS16-aware CPUsNathan Froyd
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-13target-mips: add copyright notice for mips16 workNathan Froyd
Also cross off mips16 ASE in TODO. Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-13gdbstub: add MIPS16 supportNathan Froyd
The only thing to do here is to expose the current processor mode to GDB and to set the processor mode properly when we change the PC. Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-13target-mips: add mips16 instruction decodingNathan Froyd
There's no good way to add this incrementally, so we do it all at once. The only changes to shared code are in handle_delay_slot. We need to flip ISAMode when doing a jump-and-exchange. We also need to set ISAMode the low bit of the target address for jump-to-register. Also, since we're now adding bits that can be in MIPS_HFLAG_BMASK_EXT, make sure we use MIPS_HFLAG_BMASK_BASE in the places where we just want basic information about a branch. Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-13target-mips: add enums for MIPS16 opcodesNathan Froyd
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-13target-mips: split out delay slot handlingNathan Froyd
Move delay slot handling to common code whose invocation can be controlled from gen_intermediate_code_internal. Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-13target-mips: add gen_base_offset_addrNathan Froyd
This is a common pattern in existing code. We'll also use it to implement the mips16 SAVE/RESTORE instructions. Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-13target-mips: make gen_compute_branch 16/32-bit-awareNathan Froyd
Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-13target-mips: move ROTR and ROTRV inside gen_shift_{imm, }Nathan Froyd
It's easier to implement mips16 shift instructions if we're not examining the opcode inside gen_shift_{imm,}. So move ROTR and ROTRV and do the special-case handling of SRL and SRLV inside decode_opc. Likewise for their 64-bit counterparts. Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-13target-mips: change interrupt bits to be mips16-awareNathan Froyd
We need to stash the operating mode into the low bit of the error PC and restore it on return from interrupts. Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-13target-mips: add new HFLAGs for JALX and 16/32-bit delay slotsNathan Froyd
We create separate masks for the "basic" branch hflags and the "extended" branch hflags and define MIPS_HFLAG_BMASK as the logical or of those two. This is done to avoid churning the codebase in lots of different places. We also make the execution mode an hflag under MIPS_HFLAG_TMASK Signed-off-by: Nathan Froyd <froydnj@codesourcery.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-13workaround for cmd646 bmdma register access while no dma is activeIgor V. Kovalenko
This is a workaround only, and is a partial revert of a few changes to BMDMAState which removed pci_dev field on the way. - cmd646 pci_from_bm() expects bm->unit value to correspond with bm data being passed to callback as opaque pointer. This breaks when write to dma control register of second channel happens when no dma operation is in progress, so bm->unit is zero for second channel, and pci_from_bm() returns garbage pointer. Crash happens shortly after that while dereferencing that pointer. v0->v1: cleaned up dead code from pci_from_bm. Signed-off-by: Igor V. Kovalenko <igor.v.kovalenko@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-12-13s390: typo fixMichael S. Tsirkin
s390 code has an obvious typo, which results in: hw/s390-virtio.c: At top level: hw/s390-virtio.c:249: error: request for member ‘no_vga’ in something not a structure or union Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-13s390: fix build on 32 bit hostMichael S. Tsirkin
Building on 32 bit host we get: hw/s390-virtio.c: In function ‘s390_init’: hw/s390-virtio.c:184: error: integer constant is too large for ‘unsigned long’ type 64 bit values must be ULL. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2009-12-13qemu-io: add 'const'Blue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-12-13Silence softfloat warnings on OpenSolarisAndreas Färber
Don't define C99 math functions on OpenSolaris (Solaris 11), which still ships GCC 3.4.3. This fixes redefinition warnings. Spotted by Palle Lyckegaard. Signed-off-by: Andreas Färber <afaerber@opensolaris.org> Cc: Palle Lyckegaard <palle@lyckegaard.dk> Cc: Ben Taylor <bentaylor.solx86@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-12-13tap: Compilation fix for SolarisAndreas Färber
Avoid an unresolved symbol error for TFR, which is defined in sysemu.h. Based on patch by Palle Lyckegaard. Signed-off-by: Andreas Färber <afaerber@opensolaris.org> Cc: Palle Lyckegaard <palle@lyckegaard.dk> Cc: Ben Taylor <bentaylor.solx86@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-12-13fdc/sparc32: don't hang on detection under OBPArtyom Tarasenko
Stepping through the SS-5's OBP initialization routines it looks like reading fdc main status register should clear the fd interrupt. The patch doesn't fix problems with fdc on sparc platform, it only fixes fdc detection. Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-12-13Sparc32: implement AFX for SS-5Artyom Tarasenko
Implement a stub for the AFX register on SparcStation-5. This stub is needed for running the original SS-5 OBP instead of OpenBIOS (which allows to boot Solaris 2.5.1 and Solaris 2.6 kernels). Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-12-13scsi-disk: Inquiry with allocation length of CDB < 36 (v4)Artyom Tarasenko
According to the SCSI-2 specification, http://ldkelley.com/SCSI2/SCSI2/SCSI2/SCSI2-08.html#8.2.5 , "if the allocation length of the command descriptor block (CDB) is too small to transfer all of the parameters, the additional length shall not be adjusted to reflect the truncation." The 36 mandatory bytes of response are written to outbuf, and then only the length requested in CDB is transferred. Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-12-13microblaze: Handle wdc flush and clear.Edgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2009-12-13microblaze: Correct branch to registers.Paul Hartke
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2009-12-12v2: properly save kvm system time msr registersGlauber Costa
Currently, the msrs involved in setting up pvclock are not saved over migration and/or save/restore. This patch puts their value in special fields in our CPUState, and deal with them using vmstate. kvm also has to account for it, by including them in the msr list for the ioctls. This is a backport from qemu-kvm.git [v2: sucessfully build without kerneldir ] Signed-off-by: Glauber Costa <glommer@redhat.com> Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12VNC: Convert do_info_vnc() to QObjectLuiz Capitulino
Return a QDict with server information. Connected clients are returned as a QList of QDicts. The new functions (vnc_qdict_remote_addr(), vnc_qdict_local_addr() and put_addr_qdict()) are used to insert 'host' and 'service' information in the returned QDict. This patch is big, but I don't see how to split it. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12PCI: Convert pci_device_hot_add() to QObjectLuiz Capitulino
Return a QDict with information about the just added device. This commit should not change user output. Please, note that this patch does not do error handling conversion. In error conditions the handler still calls monitor_printf(). Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12char: Convert qemu_chr_info() to QObjectLuiz Capitulino
Each device is represented by a QDict. The returned QObject is a QList of all devices. This commit should not change user output. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12block: Convert bdrv_info_stats() to QObjectLuiz Capitulino
Each device statistic information is stored in a QDict and the returned QObject is a QList of all devices. This commit should not change user output. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12block: Convert bdrv_info() to QObjectLuiz Capitulino
Each block device information is stored in a QDict and the returned QObject is a QList of all devices. This commit should not change user output. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12migration: Convert do_info_migrate() to QObjectLuiz Capitulino
Return a QDict, which may contain up to more two QDicts, depending on the type of migration we're performing. IMPORTANT: as a QInt stores a int64_t integer, RAM values are going to be stored as int64_t and not as uint64_t as they are today. If this is a problem QInt will have to be changed. This commit should not change user output. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12monitor: Convert do_info_mice() to QObjectLuiz Capitulino
Each mouse is represented by a QDict, the returned QObject is a QList of all mice. This commit should not change user output. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12monitor: Convert do_info_uuid() to QObjectLuiz Capitulino
snprintf() is used because the UUID_FMT is too complex for qobject_from_jsonf(). Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12monitor: Convert do_info_hpet() to QObjectLuiz Capitulino
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12monitor: Convert do_info_name() to QObjectLuiz Capitulino
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12monitor: Convert do_info_kvm() to QObjectLuiz Capitulino
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12monitor: Convert do_info_status() to QObjectLuiz Capitulino
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12monitor: do_info_version(): Use QDictLuiz Capitulino
All 'info' commands should use QDict, this commit also kills monitor_print_qobject() as do_info_version() doesn't use it anymore (and no handler will). Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12monitor: do_info_cpus(): Use QBoolLuiz Capitulino
While there update the documentation as well. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12monitor: Fix do_info_commands() outputLuiz Capitulino
Should return a QDict and should not print the user protocol bits (eg. "c|cont"). Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12monitor: Fix do_info_balloon() outputLuiz Capitulino
Monitor commands should always return values in bytes and info commands should always return a QDict. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12QDict: Introduce qdict_get_qlist()Luiz Capitulino
A helper function to get a QList from a QDict. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12QDict: Introduce qdict_get_qbool()Luiz Capitulino
This is a helper function that does type checking before retrieving a QBool from the dictionary. Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-27 20:54:04 +0000