| Age | Commit message (Collapse) | Author |
|---|
|
These are both stored in CPUID[EAX=7,EBX=0].ECX. KVM is going to
be able to emulate both (albeit with a performance loss in the case
of RDPID, which therefore will be in KVM_GET_EMULATED_CPUID rather
than KVM_GET_SUPPORTED_CPUID).
It's also possible to implement both in TCG, but this is for 2.8.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
These properties will be used by as address where to plug
CPU with help -device/device_add commands.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
Custom apic-id setter/getter doesn't do any property specific
checks anymore, so clean it up and use more compact static
property DEFINE_PROP_UINT32 instead.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
Machine code knows about all possible APIC IDs so use that
instead of hack which does O(n^2) complexity duplicate
checks, interating over global CPUs list.
As result duplicate check is done only once with O(log n) complexity.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
It will be reused in the next patch at pre_plug time
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
Add the host-phys-bits boolean property, if true, take phys-bits
from the hosts physical bits value, overriding either the default
or the user specified value.
We can also use the value we read from the host to check the users
explicitly set value and warn them if it doesn't match.
Note:
a) We only read the hosts value in KVM mode (because on non-x86
we get an abort if we try)
b) We don't warn about trying to use host-phys-bits in TCG mode,
we just fall back to the TCG default. This allows the machine
type to set the host-phys-bits flag if it wants and then to
work in both TCG and KVM.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
It's reverse of apicid_from_topo_ids() and will be used in follow up
patches to fill in data structures for query-hotpluggable-cpus and
for user friendly error reporting.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
Redo 9886e834 (target-i386: Require APIC ID to be explicitly set before
CPU realize) in another way that doesn't use int64_t to detect
if apic-id property has been set.
Use the fact that 0xFFFFFFFF is the broadcast
value that a CPU can't have and set default
uint32_t apic_id to it instead of using int64_t.
Later uint32_t apic_id will be used to drop custom
property setter/getter in favor of static property.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
Fill the bits between 51..number-of-physical-address-bits in the
MTRR_PHYSMASKn variable range mtrr masks so that they're consistent
in the migration stream irrespective of the physical address space
of the source VM in a migration.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
The CPU GPs if we try and set a bit in a variable MTRR mask above
the limit of physical address bits on the host. We hit this
when loading a migration from a host with a larger physical
address limit than our destination (e.g. a Xeon->i7 of same
generation) but previously used to get away with it
until 48e1a45 started checking that msr writes actually worked.
It seems in our case the GP probably comes from KVM emulating
that GP.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
Currently QEMU sets the x86 number of physical address bits to the
magic number 40. This is only correct on some small AMD systems;
Intel systems tend to have 36, 39, 46 bits, and large AMD systems
tend to have 48.
Having the value different from your actual hardware is detectable
by the guest and in principal can cause problems;
The current limit of 40 stops TB VMs being created by those lucky
enough to have that much.
This patch lets you set the physical bits by a cpu property but
defaults to the same 40bits which matches TCGs setup.
I've removed the ancient warning about the 42 bit limit in exec.c;
I can't find that limit in there and no one else seems to know where
it is.
We use a magic value of 0 as the property default so that we can
later distinguish between the default and a user set value.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
Provide a constant for the number of address bits supported under TCG.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Suggested-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
|
|
'remotes/pmaydell/tags/pull-target-arm-20160719' into staging
target-arm queue:
* fix two minor Coverity complaints
# gpg: Signature made Tue 19 Jul 2016 18:02:34 BST
# gpg: using RSA key 0x3C2525ED14360CDE
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>"
# gpg: aka "Peter Maydell <pmaydell@gmail.com>"
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>"
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20160719:
arm_gicv3: Add assert()s to tell Coverity that offsets are aligned
target-arm: Fix unreachable code in gicv3_class_name()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
into staging
linux-user fixes before 2.7 freeze, fix commit message
# gpg: Signature made Tue 19 Jul 2016 14:18:54 BST
# gpg: using RSA key 0xB44890DEDE3C9BC0
# gpg: Good signature from "Riku Voipio <riku.voipio@iki.fi>"
# gpg: aka "Riku Voipio <riku.voipio@linaro.org>"
# Primary key fingerprint: FF82 03C8 C391 98AE 0581 41EF B448 90DE DE3C 9BC0
* remotes/riku/tags/pull-linux-user-20160719-2:
linux-user: AArch64 has sync_file_range, not sync_file_range2
linux-user: Fix type for SIOCATMARK ioctl
linux-user: define missing sparc syscalls
linux-user: Fix terminal control ioctls
linux-user: Add some new blk ioctls
linux-user: Handle short lengths in host_to_target_sockaddr()
linux-user: Forget about synchronous signal once it is delivered
linux-user: Correct type for LOOP_GET_STATUS{,64} ioctls
linux-user: Correct type for BLKSSZGET
linux-user: Add loop control ioctls
linux-user: Check sigsetsize argument to syscalls
linux-user: add nested netlink types
linux-user: convert sockaddr_ll from host to target
linux-user: add fd_trans helper in do_recvfrom()
linux-user: fix netlink memory corruption
linux-user: fd_trans_*_data() returns the length
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Coverity complains that the GICR_IPRIORITYR case in gicv3_readl()
can overflow an array, because it doesn't know that the offsets
passed to that function must be word aligned. Add some assert()s
which hopefully tell Coverity that this isn't possible.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1468261372-17508-1-git-send-email-peter.maydell@linaro.org
|
|
Coverity complains that the exit() in gicv3_class_name()
can be unreachable, because if TARGET_AARCH64 is defined
then all code paths return before reaching it. Move the
exit() up to the error_report() that it belongs with.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Shannon Zhao <shannon.zhao@linaro.org>
Message-id: 1468260552-8400-1-git-send-email-peter.maydell@linaro.org
|
|
disas/bfd.h defines ATTRIBUTE_UNUSED, but unfortunately the
ALSA system headers also define this macro, which means that
you can get a compilation failure if building with ALSA and
any files happen to include the alsa headers before bfd.h
rather than the other way around.
This is unfortunate namespace pollution by the ALSA headers but
we can work around it. Add an #ifndef guard to bfd.h and remove
the unnecessary extra definition in disas/arm.c to fix this.
Reported-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 1468937076-21503-1-git-send-email-peter.maydell@linaro.org
|
|
* two old patches from prospective GSoC students
* i386 -kernel device tree support
* Coverity fix
* memory usage improvement from Peter
* checkpatch fix
* g_path_get_dirname cleanup
* caching of block status for iSCSI
# gpg: Signature made Tue 19 Jul 2016 07:43:41 BST
# gpg: using RSA key 0xBFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>"
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>"
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream:
target-i386: Remove redundant HF_SOFTMMU_MASK
block/iscsi: allow caching of the allocation map
block/iscsi: fix rounding in iscsi_allocationmap_set
Move README to markdown
cpu-exec: Move down some declarations in cpu_exec()
exec: avoid realloc in phys_map_node_reserve
checkpatch: consider git extended headers valid patches
megasas: remove useless check for cmd->frame
compiler: never omit assertions if using a static analysis tool
hw/i386: add device tree support
Changed malloc to g_malloc, free to g_free in bsd-user/qemu.h
use g_path_get_dirname instead of dirname
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
into staging
Make IRC a little less noisy
# gpg: Signature made Mon 18 Jul 2016 16:42:57 BST
# gpg: using RSA key 0xFBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>"
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-travis-20160718-1:
.travis.yml: Disable IRC build status updates from forks
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The AArch64 Linux ABI syscall 84 is sync_file_range, not
sync_file_range2 (in the kernel it uses the asm-generic
headers and does not define __ARCH_WANT_SYNC_FILE_RANGE2).
Update our TARGET_NR_* definitions accordingly.
This fixes the sync_file_range syscall which otherwise
gets its arguments in the wrong order.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
The SIOCATMARK ioctl takes an argument which should be a
pointer to an integer where the kernel will write the result.
We were incorrectly declaring it as TYPE_NULL which would mean
it would always fail (with EFAULT) when it should succeed.
Correct the type.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
NR_lookup_dcookie, NR_fadvise64, NR_fadvise64_64
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
TIOCGPTN and related terminal control ioctls were not converted to the guest ioctl format on x86_64 targets. Convert these ioctls to enable terminal functionality on x86_64 guests.
Signed-off-by: Timothy Pearson <tpearson@raptorengineering.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
staging
vnc: bugfixes for -rc0
# gpg: Signature made Tue 19 Jul 2016 08:27:05 BST
# gpg: using RSA key 0x4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>"
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>"
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>"
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* remotes/kraxel/tags/pull-vnc-20160719-1:
vnc-tight: fix regression with libxenstore
vnc-enc-tight: fix off-by-one bug
vnc: make sure we finish disconnect
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
into staging
Update OpenBIOS images
# gpg: Signature made Tue 19 Jul 2016 07:42:30 BST
# gpg: using RSA key 0x5BC2C56FAE0F321F
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>"
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F
* remotes/mcayland/tags/qemu-openbios-signed:
Update OpenBIOS images to e79bca6 built from submodule.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Add some new blk ioctls (these are 0x12,119 through
to 0x12,127). Several of these are used by mke2fs; this silences
the warnings:
mke2fs 1.42.12 (29-Aug-2014)
Unsupported ioctl: cmd=0x127b
Unsupported ioctl: cmd=0x127a
warning: Unable to get device geometry for /dev/loop5
Unsupported ioctl: cmd=0x127c
Unsupported ioctl: cmd=0x127c
Unsupported ioctl: cmd=0x1277
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
If userspace specifies a short buffer for a target sockaddr,
the kernel will only copy in as much as it has space for
(or none at all if the length is zero) -- see the kernel
move_addr_to_user() function. Mimic this in QEMU's
host_to_target_sockaddr() routine.
In particular, this fixes a segfault running the LTP
recvfrom01 test, where the guest makes a recvfrom()
call with a bad buffer pointer and other parameters which
cause the kernel to set the addrlen to zero; because we
did not skip the attempt to swap the sa_family field we
segfaulted on the bad address.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Commit 655ed67c2a248cf which switched synchronous signals to
benig recorded in ts->sync_signal rather than in a queue
with every other signal had a bug: we failed to clear
the flag indicating that a synchronous signal was pending
when we delivered it. This meant that we would take the signal
again and again every time the guest made a syscall.
(This is a bug introduced in my refactoring of Timothy Baldwin's
original code.)
Fix this by passing in the struct emulated_sigtable* to
handle_pending_signal(), so that we clear the pending flag
in the ts->sync_signal struct when handling a synchronous signal.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
The LOOP_GET_STATUS and LOOP_GET_STATUS64 ioctls were incorrectly
defined as IOC_W rather than IOC_R, which meant we weren't
correctly copying the information back from the kernel to the guest.
The loop_info64 structure definition was also missing a member
and using the wrong type for several 32-bit fields.
In particular, this meant that "kpartx -d image.img" didn't work
and "losetup -a" behaved strangely. Correct the ioctl type definitions.
Reported-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
The BLKSSZGET ioctl takes an argument which is a pointer to an int.
We were incorrectly declaring it to take a pointer to a long, which
meant that we would incorrectly write to memory which we should not
if the guest is a 64-bit architecture.
In particular, kpartx uses this ioctl to write to an int on the
stack, which tends to result in it crashing immediately.
Reported-by: Chanho Park <chanho61.park@samsung.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Add support for the /dev/loop-control ioctls:
LOOP_CTL_ADD
LOOP_CTL_REMOVE
LOOP_CTL_GET_FREE
[RV: fixed to apply to new header guards]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Many syscalls which take a sigset_t argument also take an argument
giving the size of the sigset_t. The kernel insists that this
matches its idea of the type size and fails EINVAL if it is not.
Implement this logic in QEMU. (This mostly just means some LTP test
cases which check error cases now pass.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
|
|
Nested types are used by the kernel to send link information and
protocol properties.
We can see following errors with "ip link show":
Unimplemented nested type 26
Unimplemented nested type 26
Unimplemented nested type 18
Unimplemented nested type 26
Unimplemented nested type 18
Unimplemented nested type 26
This patch implements nested types 18 (IFLA_LINKINFO) and
26 (IFLA_AF_SPEC).
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
As we convert sockaddr for AF_PACKET family for sendto() (target to
host) we need also to convert this for getsockname() (host to target).
arping uses getsockname() to get the the interface address and uses
this address with sendto().
Tested with:
/sbin/arping -D -q -c2 -I eno1 192.168.122.88
...
getsockname(3, {sa_family=AF_PACKET, proto=0x806, if2,
pkttype=PACKET_HOST, addr(6)={1, 10c37b6b9a76}, [18]) = 0
...
sendto(3, "..." 28, 0,
{sa_family=AF_PACKET, proto=0x806, if2, pkttype=PACKET_HOST,
addr(6)={1, ffffffffffff}, 20) = 28
...
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Fix passwd using netlink audit.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
Netlink is byte-swapping data in the guest memory (it's bad).
It's ok when the data come from the host as they are generated by the
host.
But it doesn't work when data come from the guest: the guest can
try to reuse these data whereas they have been byte-swapped.
This is what happens in glibc:
glibc generates a sequence number in nlh.nlmsg_seq and calls
sendto() with this nlh. In sendto(), we byte-swap nlmsg.seq.
Later, after the recvmsg(), glibc compares nlh.nlmsg_seq with
sequence number given in return, and of course it fails (hangs),
because nlh.nlmsg_seq is not valid anymore.
The involved code in glibc is:
sysdeps/unix/sysv/linux/check_pf.c:make_request()
...
req.nlh.nlmsg_seq = time (NULL);
...
if (TEMP_FAILURE_RETRY (__sendto (fd, (void *) &req, sizeof (req), 0,
(struct sockaddr *) &nladdr,
sizeof (nladdr))) < 0)
<here req.nlh.nlmsg_seq has been byte-swapped>
...
do
{
...
ssize_t read_len = TEMP_FAILURE_RETRY (__recvmsg (fd, &msg, 0));
...
struct nlmsghdr *nlmh;
for (nlmh = (struct nlmsghdr *) buf;
NLMSG_OK (nlmh, (size_t) read_len);
nlmh = (struct nlmsghdr *) NLMSG_NEXT (nlmh, read_len))
{
<we compare nlmh->nlmsg_seq with corrupted req.nlh.nlmsg_seq>
if (nladdr.nl_pid != 0 || (pid_t) nlmh->nlmsg_pid != pid
|| nlmh->nlmsg_seq != req.nlh.nlmsg_seq)
continue;
...
else if (nlmh->nlmsg_type == NLMSG_DONE)
/* We found the end, leave the loop. */
done = true;
}
}
while (! done);
As we have a continue on "nlmh->nlmsg_seq != req.nlh.nlmsg_seq",
"done" cannot be set to "true" and we have an infinite loop.
It's why commands like "apt-get update" or "dnf update hangs".
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
fd_trans_target_to_host_data() and fd_trans_host_to_target_data() must
return the length of processed data.
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
|
|
staging
# gpg: Signature made Tue 19 Jul 2016 03:33:40 BST
# gpg: using RSA key 0xEF04965B398D6211
# gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211
* remotes/jasowang/tags/net-pull-request:
e1000e: fix building without CONFIG_VMXNET3_PCI
MAINTAINERS: release Scott from being a rocker maintainer
tap: fix memory leak on failure to create a multiqueue tap device
net: fix incorrect argument to iov_to_buf
net: fix incorrect access to pointer
e1000e: fix incorrect access to pointer
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
# gpg: Signature made Mon 18 Jul 2016 23:53:15 BST
# gpg: using RSA key 0x7DEF8106AAFC390E
# gpg: Good signature from "John Snow (John Huston) <jsnow@redhat.com>"
# Primary key fingerprint: FAEB 9711 A12C F475 812F 18F2 88A9 064D 1835 61EB
# Subkey fingerprint: F9B7 ABDB BCAC DF95 BE76 CBD0 7DEF 8106 AAFC 390E
* remotes/jnsnow/tags/ide-pull-request:
block: ignore flush requests when storage is clean
tests: in IDE and AHCI tests perform DMA write before flushing
ide: set retry_unit for PIO and FLUSH requests
ide: refactor retry_unit set and clear into separate function
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
into staging
# gpg: Signature made Mon 18 Jul 2016 22:59:55 BST
# gpg: using RSA key 0x9CA4ABB381AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
# Primary key fingerprint: 8695 A8BF D3F9 7CDA AC35 775A 9CA4 ABB3 81AB 73C8
* remotes/stefanha/tags/tracing-pull-request:
trace: Add QAPI/QMP interfaces to query and control per-vCPU tracing state
trace: Allow event name pattern in "info trace-events"
trace: Conditionally trace events based on their per-vCPU state
trace: Add per-vCPU tracing states for events with the 'vcpu' property
trace: Cosmetic changes on fast-path tracing
disas: Remove unused macro '_'
trace: Identify events with the 'vcpu' property
trace: [bsd-user] Commandline arguments to control tracing
trace: [linux-user] Commandline arguments to control tracing
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
into staging
VFIO update 2016-07-18
One fix for 2.7-rc0 which hides the ARI extended capability, fixing
multifunction support in PCIe configurations where the assigned device
function topology does not match the host (Alex Williamson)
# gpg: Signature made Mon 18 Jul 2016 18:02:27 BST
# gpg: using RSA key 0x239B9B6E3BB08B22
# gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>"
# gpg: aka "Alex Williamson <alex@shazbot.org>"
# gpg: aka "Alex Williamson <alwillia@redhat.com>"
# gpg: aka "Alex Williamson <alex.l.williamson@gmail.com>"
# Primary key fingerprint: 42F6 C04E 540B D1A9 9E7B 8A90 239B 9B6E 3BB0 8B22
* remotes/awilliam/tags/vfio-update-20160718.0:
vfio/pci: Hide ARI capability
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
|
|
'HF_SOFTMMU_MASK' is only set when 'CONFIG_SOFTMMU' is defined. So
there's no need in this flag: test 'CONFIG_SOFTMMU' instead.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sergey Fedorov <serge.fdrv@gmail.com>
Signed-off-by: Sergey Fedorov <sergey.fedorov@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20160715175852.30749-6-sergey.fedorov@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
until now the allocation map was used only as a hint if a cluster
is allocated or not. If a block was not allocated (or Qemu had
no info about the allocation status) a get_block_status call was
issued to check the allocation status and possibly avoid
a subsequent read of unallocated sectors. If a block known to be
allocated the get_block_status call was omitted. In the other case
a get_block_status call was issued before every read to avoid
the necessity for a consistent allocation map. To avoid the
potential overhead of calling get_block_status for each and
every read request this took only place for the bigger requests.
This patch enhances this mechanism to cache the allocation
status and avoid calling get_block_status for blocks where
the allocation status has been queried before. This allows
for bypassing the read request even for smaller requests and
additionally omits calling get_block_status for known to be
unallocated blocks.
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <1468831940-15556-3-git-send-email-pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
when setting clusters as alloacted the boundaries have
to be expanded. As Paolo pointed out the calculation of
the number of clusters is wrong:
Suppose cluster_sectors is 2, sector_num = 1, nb_sectors = 6:
In the "mark allocated" case, you want to set 0..8, i.e.
cluster_num=0, nb_clusters=4.
0--.--2--.--4--.--6--.--8
<--|_________________|--> (<--> = expanded)
Instead you are setting nb_clusters=3, so that 6..8 is not marked.
0--.--2--.--4--.--6--.--8
<--|______________|!!! (! = wrong)
Cc: qemu-stable@nongnu.org
Reported-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Lieven <pl@kamp.de>
Message-Id: <1468831940-15556-2-git-send-email-pl@kamp.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Move the README file to markdown so that it makes the github page look
prettier. I know that github repo is a mirror and not the official
repo, but I think it doesn't hurt to have it in markdown format.
Signed-off-by: Pranith Kumar <bobby.prani@gmail.com>
Message-Id: <20160715043111.29007-1-bobby.prani@gmail.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
|
|
Some guests (win2008 server for example) do a lot of unnecessary
flushing when underlying media has not changed. This adds additional
overhead on host when calling fsync/fdatasync.
This change introduces a write generation scheme in BlockDriverState.
Current write generation is checked against last flushed generation to
avoid unnessesary flushes.
The problem with excessive flushing was found by a performance test
which does parallel directory tree creation (from 2 processes).
Results improved from 0.424 loops/sec to 0.432 loops/sec.
Each loop creates 10^3 directories with 10 files in each.
This affected some blkdebug testcases that were expecting error logs from
failure-injected flushes which are now skipped entirely
(tests 026 071 089).
This also affects the performance of block jobs and thus BLOCK_JOB_READY
events for driver-mirror and active block-commit commands now arrives
faster, before QMP send successfully returns to caller (tests 141 144).
Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1468870792-7411-5-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <famz@redhat.com>
CC: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Due to changes in flush behaviour clean disks stopped generating
flush_to_disk events and IDE and AHCI tests that test flush commands
started to fail.
This change adds additional DMA writes to affected tests before sending
flush commands so that bdrv_flush actually generates flush_to_disk event.
Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1468870792-7411-4-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <famz@redhat.com>
CC: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
The following sequence of tests discovered a problem in IDE emulation:
1. Send DMA write to IDE device 0
2. Send CMD_FLUSH_CACHE to same IDE device which will be failed by block
layer using blkdebug script in tests/ide-test:test_retry_flush
When doing DMA request ide/core.c will set s->retry_unit to s->unit in
ide_start_dma. When dma completes ide_set_inactive sets retry_unit to -1.
After that ide_flush_cache runs and fails thanks to blkdebug.
ide_flush_cb calls ide_handle_rw_error which asserts that s->retry_unit
== s->unit. But s->retry_unit is still -1 after previous DMA completion
and flush does not use anything related to retry.
This patch restricts retry unit assertion only to ops that actually use
retry logic.
Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1468870792-7411-3-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <famz@redhat.com>
CC: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
|
|
Code to set and clear state associated with retry in moved into
ide_set_retry and ide_clear_retry to make adding retry setups easier.
Signed-off-by: Evgeny Yakovlev <eyakovlev@virtuozzo.com>
Signed-off-by: Denis V. Lunev <den@openvz.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1468870792-7411-2-git-send-email-den@openvz.org
CC: Kevin Wolf <kwolf@redhat.com>
CC: Max Reitz <mreitz@redhat.com>
CC: Stefan Hajnoczi <stefanha@redhat.com>
CC: Fam Zheng <famz@redhat.com>
CC: John Snow <jsnow@redhat.com>
Signed-off-by: John Snow <jsnow@redhat.com>
|
