| Age | Commit message (Collapse) | Author |
|---|
|
extern char **environ has no standard home, so move the declaration from the .c
file to a handy .h file. Since this is a standard, old-school UNIX interface
dating from the 5th edition, it's not quite the same issue that the rule is
supposed to protect against, though.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
|
|
Remove dead code that's been commented out forever.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
|
|
Use the preferred block comment style.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
|
|
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
|
|
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
|
|
Space after keywords, no space for function calls and spaces around operators.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
|
|
'remotes/dgilbert-gitlab/tags/pull-virtiofs-20210506' into staging
virtiofsd pull 2021-05-06
A pile of cleanups:
Use of glib allocators from Mahmoud
Virtio spec compliance and printf cleanup from me.
Sugar to turn on xattr when defining xattr mapping from Carlos
an assert cleanup from Greg
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
# gpg: Signature made Thu 06 May 2021 19:54:18 BST
# gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7
# gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full]
# Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7
* remotes/dgilbert-gitlab/tags/pull-virtiofs-20210506:
virtiofsd/fuse_virtio.c: Changed allocations of locals to GLib
virtiofsd/passthrough_ll.c: Changed local allocations to GLib functions
virtiofsd: Changed allocations of fv_VuDev & its internals to GLib functions
virtiofsd: Changed allocation of lo_map_elems to GLib's functions
virtiofsd: Changed allocations of fuse_session to GLib's functions
virtiofsd: Changed allocations of iovec to GLib's functions
virtiofsd: Changed allocations of fuse_req to GLib functions
virtiofsd: Don't assume header layout
virtiofs: Fixup printf args
virtiofsd: Add help for -o xattr-mapping
virtiofsd: Allow use "-o xattrmap" without "-o xattr"
virtiofsd: Fix side-effect in assert()
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
into staging
usb: fix some memory allocation issues (CVE-2021-3527).
usb: add stubs, allow building without usb subsystem.
# gpg: Signature made Wed 05 May 2021 14:07:02 BST
# gpg: using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138
# gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full]
# gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full]
# gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full]
# Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138
* remotes/kraxel/tags/usb-20210505-pull-request:
usb: limit combined packets to 1 MiB (CVE-2021-3527)
usb/mtp: avoid dynamic stack allocation
usb/redir: avoid dynamic stack allocation (CVE-2021-3527)
usb/hid: avoid dynamic stack allocation
hw/usb: Do not build USB subsystem if not required
hw/usb/host-stub: Remove unused header
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
'remotes/pmaydell/tags/pull-target-arm-20210510-1' into staging
target-arm queue:
* docs: fix link in sbsa description
* linux-user/aarch64: Enable hwcap for RND, BTI, and MTE
* target/arm: Fix tlbbits calculation in tlbi_aa64_vae2is_write()
* target/arm: Split neon and vfp translation to their own
compilation units
* target/arm: Make WFI a NOP for userspace emulators
* hw/sd/omap_mmc: Use device_cold_reset() instead of
device_legacy_reset()
* include: More fixes for 'extern "C"' block use
* hw/arm/imx25_pdk: Fix error message for invalid RAM size
* hw/arm/mps2-tz: Implement AN524 memory remapping via machine property
* hw/arm/xlnx: Fix PHY address for xilinx-zynq-a9
# gpg: Signature made Mon 10 May 2021 17:26:55 BST
# gpg: using RSA key E1A5C593CD419DE28E8315CF3C2525ED14360CDE
# gpg: issuer "peter.maydell@linaro.org"
# gpg: Good signature from "Peter Maydell <peter.maydell@linaro.org>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@gmail.com>" [ultimate]
# gpg: aka "Peter Maydell <pmaydell@chiark.greenend.org.uk>" [ultimate]
# Primary key fingerprint: E1A5 C593 CD41 9DE2 8E83 15CF 3C25 25ED 1436 0CDE
* remotes/pmaydell/tags/pull-target-arm-20210510-1: (26 commits)
hw/arm/xlnx: Fix PHY address for xilinx-zynq-a9
hw/arm/mps2-tz: Implement AN524 memory remapping via machine property
hw/misc/mps2-scc: Support using CFG0 bit 0 for remapping
hw/misc/mps2-scc: Add "QEMU interface" comment
hw/arm/imx25_pdk: Fix error message for invalid RAM size
include/disas/dis-asm.h: Handle being included outside 'extern "C"'
include/qemu/bswap.h: Handle being included outside extern "C" block
osdep: Make os-win32.h and os-posix.h handle 'extern "C"' themselves
hw/sd/omap_mmc: Use device_cold_reset() instead of device_legacy_reset()
target/arm: Make WFI a NOP for userspace emulators
target/arm: Make translate-neon.c.inc its own compilation unit
target/arm: Make functions used by translate-neon global
target/arm: Move NeonGenThreeOpEnvFn typedef to translate.h
target/arm: Delete unused typedef
target/arm: Move vfp_reg_ptr() to translate-neon.c.inc
target/arm: Make translate-vfp.c.inc its own compilation unit
target/arm: Make functions used by translate-vfp global
target/arm: Move vfp_{load, store}_reg{32, 64} to translate-vfp.c.inc
target/arm: Move gen_aa32 functions to translate-a32.h
target/arm: Split m-nocp trans functions into their own file
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Commit dfc388797cc4 ("hw/arm: xlnx: Set all boards' GEM 'phy-addr'
property value to 23") configured the PHY address for xilinx-zynq-a9
to 23. When trying to boot xilinx-zynq-a9 with zynq-zc702.dtb or
zynq-zc706.dtb, this results in the following error message when
trying to use the Ethernet interface.
macb e000b000.ethernet eth0: Could not attach PHY (-19)
The devicetree files for ZC702 and ZC706 configure PHY address 7. The
documentation for the ZC702 and ZC706 evaluation boards suggest that the
PHY address is 7, not 23. Other boards use PHY address 0, 1, 3, or 7.
I was unable to find a documentation or a devicetree file suggesting
or using PHY address 23. The Ethernet interface starts working with
zynq-zc702.dtb and zynq-zc706.dtb when setting the PHY address to 7,
so let's use it.
Cc: Bin Meng <bin.meng@windriver.com>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Acked-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20210504124140.1100346-1-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
The AN524 FPGA image supports two memory maps, which differ in where
the QSPI and BRAM are. In the default map, the BRAM is at
0x0000_0000, and the QSPI at 0x2800_0000. In the second map, they
are the other way around.
In hardware, the initial mapping can be selected by the user by
writing either "REMAP: BRAM" (the default) or "REMAP: QSPI" in the
board configuration file. The board config file is acted on by the
"Motherboard Configuration Controller", which is an entirely separate
microcontroller on the dev board but outside the FPGA.
The guest can also dynamically change the mapping via the SCC
CFG_REG0 register.
Implement this functionality for QEMU, using a machine property
"remap" with valid values "BRAM" and "QSPI" to allow the user to set
the initial mapping, in the same way they can on the FPGA, and
wiring up the bit from the SCC register to also switch the mapping.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210504120912.23094-4-peter.maydell@linaro.org
|
|
On some boards, SCC config register CFG0 bit 0 controls whether
parts of the board memory map are remapped. Support this with:
* a device property scc-cfg0 so the board can specify the
initial value of the CFG0 register
* an outbound GPIO line which tracks bit 0 and which the board
can wire up to provide the remapping
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210504120912.23094-3-peter.maydell@linaro.org
|
|
The MPS2 SCC device doesn't have any documentation of its properties;
add a "QEMU interface" format comment describing them.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210504120912.23094-2-peter.maydell@linaro.org
|
|
The i.MX25 PDK board has 2 banks for SDRAM, each can
address up to 256 MiB. So the total RAM usable for this
board is 512M. When we ask for more we get a misleading
error message:
$ qemu-system-arm -M imx25-pdk -m 513M
qemu-system-arm: Invalid RAM size, should be 128 MiB
Update the error message to better match the reality:
$ qemu-system-arm -M imx25-pdk -m 513M
qemu-system-arm: RAM size more than 512 MiB is not supported
Fixes: bf350daae02 ("arm/imx25_pdk: drop RAM size fixup")
Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 20210407225608.1882855-1-f4bug@amsat.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Make dis-asm.h handle being included outside an 'extern "C"' block;
this allows us to remove the 'extern "C"' blocks that our two C++
files that include it are using.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Make bswap.h handle being included outside an 'extern "C"' block:
all system headers are included first, then all declarations are
put inside an 'extern "C"' block.
This requires a little rearrangement as currently we have an ifdef
ladder that has some system includes and some local declarations
or definitions, and we need to separate those out.
We want to do this because dis-asm.h includes bswap.h, dis-asm.h
may need to be included from C++ files, and system headers should
not be included within 'extern "C"' blocks.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
Both os-win32.h and os-posix.h include system header files. Instead
of having osdep.h include them inside its 'extern "C"' block, make
these headers handle that themselves, so that we don't include the
system headers inside 'extern "C"'.
This doesn't fix any current problems, but it's conceptually the
right way to handle system headers.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
|
|
The omap_mmc_reset() function resets its SD card via
device_legacy_reset(). We know that the SD card does not have a qbus
of its own, so the new device_cold_reset() function (which resets
both the device and its child buses) is equivalent here to
device_legacy_reset() and we can just switch to the new API.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210430222348.8514-1-peter.maydell@linaro.org
|
|
The WFI insn is not system-mode only, though it doesn't usually make
a huge amount of sense for userspace code to execute it. Currently
if you try it in qemu-arm then the helper function will raise an
EXCP_HLT exception, which is not covered by the switch in cpu_loop()
and results in an abort:
qemu: unhandled CPU exception 0x10001 - aborting
R00=00000001 R01=408003e4 R02=408003ec R03=000102ec
R04=00010a28 R05=00010158 R06=00087460 R07=00010158
R08=00000000 R09=00000000 R10=00085b7c R11=408002a4
R12=408002b8 R13=408002a0 R14=0001057c R15=000102f8
PSR=60000010 -ZC- A usr32
qemu:handle_cpu_signal received signal outside vCPU context @ pc=0x7fcbfa4f0a12
Make the WFI helper function return immediately in the usermode
emulator. This turns WFI into a NOP, which is OK because:
* architecturally "WFI is a NOP" is a permitted implementation
* aarch64 Linux kernels use the SCTLR_EL1.nTWI bit to trap
userspace WFI and NOP it (though aarch32 kernels currently
just let WFI do whatever it would do)
We could in theory make the translate.c code special case user-mode
emulation and NOP the insn entirely rather than making the helper
do nothing, but because no real world code will be trying to
execute WFI we don't care about efficiency and the helper provides
a single place where we can make the change rather than having
to touch multiple places in translate.c and translate-a64.c.
Fixes: https://bugs.launchpad.net/qemu/+bug/1926759
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210430162212.825-1-peter.maydell@linaro.org
|
|
Switch translate-neon.c.inc from being #included into translate.c
to being its own compilation unit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210430132740.10391-14-peter.maydell@linaro.org
|
|
Make the remaining functions needed by the translate-neon code
global.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210430132740.10391-13-peter.maydell@linaro.org
|
|
Move the NeonGenThreeOpEnvFn typedef to translate.h together
with the other similar typedefs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210430132740.10391-12-peter.maydell@linaro.org
|
|
The VFPGenFixPointFn typedef is unused; delete it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-id: 20210430132740.10391-11-peter.maydell@linaro.org
|
|
The function vfp_reg_ptr() is used only in translate-neon.c.inc;
move it there.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210430132740.10391-10-peter.maydell@linaro.org
|
|
Switch translate-vfp.c.inc from being #included into translate.c
to being its own compilation unit.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210430132740.10391-9-peter.maydell@linaro.org
|
|
Make the remaining functions which are needed by translate-vfp.c.inc
global.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210430132740.10391-8-peter.maydell@linaro.org
|
|
The functions vfp_load_reg32(), vfp_load_reg64(), vfp_store_reg32()
and vfp_store_reg64() are used only in translate-vfp.c.inc. Move
them to that file.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210430132740.10391-7-peter.maydell@linaro.org
|
|
Move the various gen_aa32* functions and macros out of translate.c
and into translate-a32.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210430132740.10391-6-peter.maydell@linaro.org
|
|
Currently the trans functions for m-nocp.decode all live in
translate-vfp.inc.c; move them out into their own translation unit,
translate-m-nocp.c.
The trans_* functions here are pure code motion with no changes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210430132740.10391-5-peter.maydell@linaro.org
|
|
We want to split out the .c.inc files which are currently included
into translate.c so they are separate compilation units. To do this
we need to make some functions which are currently file-local to
translate.c have global scope; create a translate-a32.h paralleling
the existing translate-a64.h as a place for these declarations to
live, so that code moved into the new compilation units can call
them.
The functions made global here are those required by the
m-nocp.decode functions, except that I have converted the whole
family of {read,write}_neon_element* and also both the load_cpu and
store_cpu functions for consistency, even though m-nocp only wants a
few functions from each.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210430132740.10391-4-peter.maydell@linaro.org
|
|
The unallocated_encoding() function is the same in both
translate-a64.c and translate.c; make the translate.c function global
and drop the translate-a64.c version. To do this we need to also
share gen_exception_insn(), which currently exists in two slightly
different versions for A32 and A64: merge those into a single
function that can work for both.
This will be useful for splitting up translate.c, which will require
unallocated_encoding() to no longer be file-local. It's also
hopefully less confusing to have only one version of the function
rather than two.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210430132740.10391-3-peter.maydell@linaro.org
|
|
Some of the constant expanders defined in translate.c are generically
useful and will be used by the separate C files for VFP and Neon once
they are created; move the expander definitions to translate.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210430132740.10391-2-peter.maydell@linaro.org
|
|
In tlbi_aa64_vae2is_write() the calculation
bits = tlbbits_for_regime(env, secure ? ARMMMUIdx_E2 : ARMMMUIdx_SE2,
pageaddr)
has the two arms of the ?: expression reversed. Fix the bug.
Fixes: b6ad6062f1e5
Reported-by: Rebecca Cran <rebecca@nuviainc.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Rémi Denis-Courmont <remi.denis.courmont@huawei.com>
Reviewed-by: Rebecca Cran <rebecca@nuviainc.com>
Message-id: 20210420123106.10861-1-peter.maydell@linaro.org
|
|
These three features are already enabled by TCG, but are missing
their hwcap bits. Update HWCAP2 from linux v5.12.
Cc: qemu-stable@nongnu.org (for 6.0.1)
Buglink: https://bugs.launchpad.net/bugs/1926044
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20210427214108.88503-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
A trailing _ makes all the difference to the rendered link.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20210428131316.31390-1-alex.bennee@linaro.org
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
into staging
qemu-sparc queue
# gpg: Signature made Wed 05 May 2021 08:29:13 BST
# gpg: using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F
# gpg: issuer "mark.cave-ayland@ilande.co.uk"
# gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [full]
# Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F
* remotes/mcayland/tags/qemu-sparc-20210505:
hw/sparc*: Move cpu_check_irqs() to target/sparc/
hw/sparc64: Fix code style for checkpatch.pl
hw/sparc64: Remove unused "hw/char/serial.h" header
hw/sparc: Allow building without the leon3 machine
hw/sparc/sun4m: Move each sun4m_hwdef definition in its class_init
hw/sparc/sun4m: Fix code style for checkpatch.pl
hw/sparc/sun4m: Register machine types in sun4m_machine_types[]
hw/sparc/sun4m: Factor out sun4m_machine_class_init()
hw/sparc/sun4m: Introduce Sun4mMachineClass
hw/sparc/sun4m: Have sun4m machines inherit new TYPE_SUN4M_MACHINE
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
Replaced the allocation of local variables from malloc() to
GLib allocation functions.
In one instance, dropped the usage to an assert after a malloc()
call and used g_malloc() instead.
Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210420154643.58439-8-ma.mandourr@gmail.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Changed the allocations of some local variables to GLib's allocation
functions, such as g_try_malloc0(), and annotated those variables
as g_autofree. Subsequently, I was able to remove the calls to free().
Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210420154643.58439-7-ma.mandourr@gmail.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Changed the allocations of fv_VuDev structs, VuDev structs, and
fv_QueueInfo strcuts from using calloc()/realloc() & free() to using
the equivalent functions from GLib.
In instances, removed the pair of allocation and assertion for
non-NULL checking with a GLib function that aborts on error.
Removed NULL-checking for fv_VuDev struct allocation and used
a GLib function that crashes on error; namely, g_new0(). This
is because allocating one struct should not be a problem on an
healthy system. Also following the pattern of aborting-on-null
behaviour that is taken with allocating VuDev structs and
fv_QueueInfo structs.
Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210420154643.58439-6-ma.mandourr@gmail.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Replaced (re)allocation of lo_map_elem structs from realloc() to
GLib's g_try_realloc_n() and replaced the respective free() call
with a g_free().
Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210420154643.58439-5-ma.mandourr@gmail.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Replaced the allocation and deallocation of fuse_session structs
from calloc() and free() calls to g_try_new0() and g_free().
Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210420154643.58439-4-ma.mandourr@gmail.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Replaced the calls to malloc()/calloc() and their respective
calls to free() of iovec structs with GLib's allocation and
deallocation functions and used g_autofree when appropriate.
Replaced the allocation of in_sg_cpy to g_new() instead of a call
to calloc() and a null-checking assertion. Not g_new0()
because the buffer is immediately overwritten using memcpy.
Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Message-Id: <20210427181333.148176-1-ma.mandourr@gmail.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
Replaced the allocation and deallocation of fuse_req structs
using calloc()/free() call pairs to a GLib's g_try_new0()
and g_free().
Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20210420154643.58439-2-ma.mandourr@gmail.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
|
|
virtiofsd incorrectly assumed a fixed set of header layout in the virt
queue; assuming that the fuse and write headers were conveniently
separated from the data; the spec doesn't allow us to take that
convenience, so fix it up to deal with it the hard way.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210428110100.27757-3-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
Fixup some fuse_log printf args for 32bit compatibility.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20210428110100.27757-2-dgilbert@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
|
|
The option is not documented in help.
Add small help about the option.
Signed-off-by: Carlos Venegas <jose.carlos.venegas.munoz@intel.com>
Message-Id: <20210414201207.3612432-3-jose.carlos.venegas.munoz@intel.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Connor Kuehl <ckuehl@redhat.com>
|
|
When -o xattrmap is used, it will not work unless xattr is enabled.
This patch enables xattr when -o xattrmap is used.
Signed-off-by: Carlos Venegas <jose.carlos.venegas.munoz@intel.com>
Message-Id: <20210414201207.3612432-2-jose.carlos.venegas.munoz@intel.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Connor Kuehl <ckuehl@redhat.com>
|
|
It is bad practice to put an expression with a side-effect in
assert() because the side-effect won't happen if the code is
compiled with -DNDEBUG.
Use an intermediate variable. Consolidate this in an macro to
have proper line numbers when the assertion is hit.
virtiofsd: ../../tools/virtiofsd/passthrough_ll.c:2797: lo_getxattr:
Assertion `fchdir_res == 0' failed.
Aborted
2796 /* fchdir should not fail here */
=>2797 FCHDIR_NOFAIL(lo->proc_self_fd);
2798 ret = getxattr(procname, name, value, size);
2799 FCHDIR_NOFAIL(lo->root.fd);
Fixes: bdfd66788349 ("virtiofsd: Fix xattr operations")
Cc: misono.tomohiro@jp.fujitsu.com
Signed-off-by: Greg Kurz <groug@kaod.org>
Message-Id: <20210409100627.451573-1-groug@kaod.org>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
|
|
staging
* NetBSD NVMM support
* RateLimit mutex
* Prepare for Meson 0.57 upgrade
# gpg: Signature made Tue 04 May 2021 13:15:37 BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini-gitlab/tags/for-upstream:
glib-compat: accept G_TEST_SLOW environment variable
gitlab-ci: use --meson=internal for CFI jobs
configure: handle meson options that have changed type
configure: reindent meson invocation
slirp: add configure option to disable smbd
ratelimit: protect with a mutex
Add NVMM Accelerator: add maintainers for NetBSD/NVMM
Add NVMM accelerator: acceleration enlightenments
Add NVMM accelerator: x86 CPU support
Add NVMM accelerator: configure and build logic
oslib-win32: do not rely on macro to get redefined function name
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
|
into staging
ppc patch queue 2021-05-04
Here's the first ppc pull request for qemu-6.1. It has a wide variety
of stuff accumulated during the 6.0 freeze. Highlights are:
* Multi-phase reset cleanups for PAPR
* Preliminary cleanups towards allowing !CONFIG_TCG for the ppc target
* Cleanup of AIL logic and extension to POWER10
* Further improvements to handling of hot unplug failures on PAPR
* Allow much larger numbers of CPU on pseries
* Support for the H_SCM_HEALTH hypercall
* Add support for the Pegasos II board
* Substantial cleanup to hflag handling
* Assorted minor fixes and cleanups
# gpg: Signature made Tue 04 May 2021 06:52:39 BST
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dg-gitlab/tags/ppc-for-6.1-20210504: (46 commits)
hw/ppc/pnv_psi: Use device_cold_reset() instead of device_legacy_reset()
hw/ppc/spapr_vio: Reset TCE table object with device_cold_reset()
hw/intc/spapr_xive: Use device_cold_reset() instead of device_legacy_reset()
target/ppc: removed VSCR from SPR registration
target/ppc: Reduce the size of ppc_spr_t
target/ppc: Clean up _spr_register et al
target/ppc: Add POWER10 exception model
target/ppc: rework AIL logic in interrupt delivery
target/ppc: move opcode table logic to translate.c
target/ppc: code motion from translate_init.c.inc to gdbstub.c
spapr_drc.c: handle hotunplug errors in drc_unisolate_logical()
spapr.h: increase FDT_MAX_SIZE
spapr.c: do not use MachineClass::max_cpus to limit CPUs
ppc: Rename current DAWR macros and variables
target/ppc: POWER10 supports scv
target/ppc: Fix POWER9 radix guest HV interrupt AIL behaviour
docs/system: ppc: Add documentation for ppce500 machine
roms/u-boot: Bump ppce500 u-boot to v2021.04 to fix broken pci support
roms/Makefile: Update ppce500 u-boot build directory name
ppc/spapr: Add support for implement support for H_SCM_HEALTH
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
|
