aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2017-05-24ppc/xics: simplify prototype of xics_spapr_init()Greg Kurz
This function only does hypercall and RTAS-call registration, and thus never returns an error. This patch adapt the prototype to reflect that. Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Cédric Le Goater <clg@kaod.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-05-24target/ppc: reset reservation in do_rfi()Nikunj A Dadhania
For transitioning back to userspace after the interrupt. Suggested-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Nikunj A Dadhania <nikunj@linux.vnet.ibm.com> Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
2017-05-23Merge remote-tracking branch 'jasowang/tags/net-pull-request' into stagingStefan Hajnoczi
# gpg: Signature made Tue 23 May 2017 03:27:37 AM BST # gpg: using RSA key 0xEF04965B398D6211 # gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" # Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211 * jasowang/tags/net-pull-request: e1000e: Fix ICR "Other" causes clear logic net/filter-rewriter: Remove unused option in filter-rewriter net/filter-mirror.c: Rename filter_mirror_send() and fix codestyle net/filter-mirror.c: Remove duplicate check code. hmp / net: Mark host_net_add/remove as deprecated COLO-compare: Improve tcp compare trace event readability virtio-net: fix wild pointer when remove virtio-net queues net/dump: Issue a warning for the deprecated "-net dump" net/tap: Replace tap-haiku.c and tap-aix.c by a generic tap-stub.c Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-23e1000e: Fix ICR "Other" causes clear logicSameeh Jubran
This commit fixes a bug which causes the guest to hang. The bug was observed upon a "receive overrun" (bit #6 of the ICR register) interrupt which could be triggered post migration in a heavy traffic environment. Even though the "receive overrun" bit (#6) is masked out by the IMS register (refer to the log below) the driver still receives an interrupt as the "receive overrun" bit (#6) causes the "Other" - bit #24 of the ICR register - bit to be set as documented below. The driver handles the interrupt and clears the "Other" bit (#24) but doesn't clear the "receive overrun" bit (#6) which leads to an infinite loop. Apparently the Windows driver expects that the "receive overrun" bit and other ones - documented below - to be cleared when the "Other" bit (#24) is cleared. So to sum that up: 1. Bit #6 of the ICR register is set by heavy traffic 2. As a results of setting bit #6, bit #24 is set 3. The driver receives an interrupt for bit 24 (it doesn't receieve an interrupt for bit #6 as it is masked out by IMS) 4. The driver handles and clears the interrupt of bit #24 5. Bit #6 is still set. 6. 2 happens all over again The Interrupt Cause Read - ICR register: The ICR has the "Other" bit - bit #24 - that is set when one or more of the following ICR register's bits are set: LSC - bit #2, RXO - bit #6, MDAC - bit #9, SRPD - bit #16, ACK - bit #17, MNG - bit #18 This bug can occur with any of these bits depending on the driver's behaviour and the way it configures the device. However, trying to reproduce it with any bit other than RX0 is challenging and came to failure as the drivers don't implement most of these bits, trying to reproduce it with LSC (Link Status Change - bit #2) bit didn't succeed too as it seems that Windows handles this bit differently. Log sample of the storm: 27563@1494850819.411877:e1000e_irq_pending_interrupts ICR PENDING: 0x1000000 (ICR: 0x815000c2, IMS: 0x1a00004) 27563@1494850819.411900:e1000e_irq_pending_interrupts ICR PENDING: 0x0 (ICR: 0x815000c2, IMS: 0xa00004) 27563@1494850819.411915:e1000e_irq_pending_interrupts ICR PENDING: 0x0 (ICR: 0x815000c2, IMS: 0xa00004) 27563@1494850819.412380:e1000e_irq_pending_interrupts ICR PENDING: 0x0 (ICR: 0x815000c2, IMS: 0xa00004) 27563@1494850819.412395:e1000e_irq_pending_interrupts ICR PENDING: 0x0 (ICR: 0x815000c2, IMS: 0xa00004) 27563@1494850819.412436:e1000e_irq_pending_interrupts ICR PENDING: 0x0 (ICR: 0x815000c2, IMS: 0xa00004) 27563@1494850819.412441:e1000e_irq_pending_interrupts ICR PENDING: 0x0 (ICR: 0x815000c2, IMS: 0xa00004) 27563@1494850819.412998:e1000e_irq_pending_interrupts ICR PENDING: 0x1000000 (ICR: 0x815000c2, IMS: 0x1a00004) * This bug behaviour wasn't observed with the Linux driver. This commit solves: https://bugzilla.redhat.com/show_bug.cgi?id=1447935 https://bugzilla.redhat.com/show_bug.cgi?id=1449490 Cc: qemu-stable@nongnu.org Signed-off-by: Sameeh Jubran <sjubran@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-05-23net/filter-rewriter: Remove unused option in filter-rewriterZhang Chen
Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-05-23net/filter-mirror.c: Rename filter_mirror_send() and fix codestyleZhang Chen
Because filter_mirror_receive_iov() and filter_redirector_receive_iov() both use the filter_mirror_send() to send packet, so I change filter_mirror_send() to filter_send() that looks more common. And fix some codestyle. Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-05-23net/filter-mirror.c: Remove duplicate check code.Zhang Chen
The s->outdev have checked in filter_mirror_set_outdev(). Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-05-23hmp / net: Mark host_net_add/remove as deprecatedThomas Huth
The netdev_add and netdev_del commands should be used nowadays instead. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-05-23COLO-compare: Improve tcp compare trace event readabilityZhang Chen
Because of previous patch's trace arguments over the limit of UST backend, so I rewrite the patch. Signed-off-by: Zhang Chen <zhangchen.fnst@cn.fujitsu.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-05-23virtio-net: fix wild pointer when remove virtio-net queuesYunjian Wang
The tx_bh or tx_timer will free in virtio_net_del_queue() function, when removing virtio-net queues if the guest doesn't support multiqueue. But it might be still referenced by virtio_net_set_status(), which needs to be set NULL. And also the tx_waiting needs to be set zero to prevent virtio_net_set_status() accessing tx_bh or tx_timer. Cc: qemu-stable@nongnu.org Signed-off-by: Yunjian Wang <wangyunjian@huawei.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-05-23net/dump: Issue a warning for the deprecated "-net dump"Thomas Huth
Network dumping should be done with "-object filter-dump" nowadays. Using "-net dump" via the VLAN mechanism is considered as deprecated and might be removed in a future release. So warn the users now to inform them to user the filter-dump method instead. Signed-off-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-05-23net/tap: Replace tap-haiku.c and tap-aix.c by a generic tap-stub.cThomas Huth
The files tap-haiku.c and tap-aix.c are identical (except one line of error message). We should avoid such code duplication, so replace these by a generic tap-stub.c file instead. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Jason Wang <jasowang@redhat.com>
2017-05-22Merge remote-tracking branch 'mcayland/tags/qemu-openbios-signed' into stagingStefan Hajnoczi
Update OpenBIOS images # gpg: Signature made Fri 19 May 2017 05:05:54 PM BST # gpg: using RSA key 0x5BC2C56FAE0F321F # gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" # Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F * mcayland/tags/qemu-openbios-signed: Update OpenBIOS images to 3ebaaa2 built from submodule. Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-19Merge remote-tracking branch 'kraxel/tags/pull-audio-20170519-1' into stagingStefan Hajnoczi
audio: move & rename soundhw init code. # gpg: Signature made Fri 19 May 2017 12:22:51 PM BST # gpg: using RSA key 0x4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * kraxel/tags/pull-audio-20170519-1: audio: Rename hw/audio/audio.h to hw/audio/soundhw.h audio: Rename audio_init() to soundhw_init() audio: Move arch_init audio code to hw/audio/soundhw.c Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-19Update OpenBIOS images to 3ebaaa2 built from submodule.Mark Cave-Ayland
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2017-05-19Merge remote-tracking branch 'kraxel/tags/pull-ui-20170519-1' into stagingStefan Hajnoczi
ui: egl-headless requires dmabuf support # gpg: Signature made Fri 19 May 2017 09:46:40 AM BST # gpg: using RSA key 0x4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * kraxel/tags/pull-ui-20170519-1: ui: egl-headless requires dmabuf support Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-19Merge remote-tracking branch 'quintela/tags/migration/20170518' into stagingStefan Hajnoczi
migration/next for 20170518 # gpg: Signature made Thu 18 May 2017 06:23:26 PM BST # gpg: using RSA key 0xF487EF185872D723 # gpg: Good signature from "Juan Quintela <quintela@redhat.com>" # gpg: aka "Juan Quintela <quintela@trasno.org>" # Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723 * quintela/tags/migration/20170518: migration: Make savevm.c target independent exec: Create include for target_page_size() migration: migration.h was not needed migration: Remove vmstate.h from migration.h migration: Remove qemu-file.h from vmstate.h migration: Split vmstate-types.c from vmstate.c migration: Move qjson.h to migration/ migration: Remove migration.h from colo.h migration: Export qemu-file-channel.c functions in its own file migration: Split migration/channel.c for channel operations migration: Create migration/xbzrle.h block migration: Allow compile time disable migration: Remove old MigrationParams migration: Remove use of old MigrationParams migration: Create block capability hmp: Use visitor api for hmp_migrate_set_parameter() postcopy: Require RAMBlocks that are whole pages migration: Fix non-multiple of page size migration Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-19audio: Rename hw/audio/audio.h to hw/audio/soundhw.hEduardo Habkost
All the functions in hw/audio/audio.h are called "soundhw_*()" and live in hw/audio/audiohw.c. Rename the header file for consistency. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Hervé Poussineau <hpoussin@reactos.org> Message-id: 20170508205735.23444-4-ehabkost@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-05-19audio: Rename audio_init() to soundhw_init()Eduardo Habkost
To make it consistent with the remaining soundhw.c functions and avoid confusion with the audio_init() function in audio/audio.c, rename audio_init() to soundhw_init(). Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Message-id: 20170508205735.23444-3-ehabkost@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-05-19audio: Move arch_init audio code to hw/audio/soundhw.cEduardo Habkost
There's no reason to keep the soundhw table in arch_init.c. Move that code to a new hw/audio/soundhw.c file. While moving the code, trivial coding style issues were fixed. Signed-off-by: Eduardo Habkost <ehabkost@redhat.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20170508205735.23444-2-ehabkost@redhat.com Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2017-05-19ui: egl-headless requires dmabuf supportGerd Hoffmann
Reported-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20170517122744.3541-1-kraxel@redhat.com
2017-05-18migration: Make savevm.c target independentJuan Quintela
It only needed TARGET_PAGE_SIZE/BITS/BITS_MIN values, so just export them from exec.h Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-05-18exec: Create include for target_page_size()Juan Quintela
That is the only function that we need from exec.c, and having to include the whole sysemu.h for this. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> --- /me leans to be less sloppy with copyright notices thanks Dave
2017-05-18migration: migration.h was not neededJuan Quintela
This files don't use any function from migration.h, so drop it. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-05-18migration: Remove vmstate.h from migration.hJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> --- Minor rearrangements due to rebase
2017-05-18migration: Remove qemu-file.h from vmstate.hJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> -- minor rearangements due to the rebase
2017-05-18migration: Split vmstate-types.c from vmstate.cJuan Quintela
Now one just has the interperter, and the other has the basic types. Once there, add copyright boilerplate. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com> -- Use GPL v2 or later. Detected by David.
2017-05-18migration: Move qjson.h to migration/Juan Quintela
It is only used for migration code. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-05-18migration: Remove migration.h from colo.hJuan Quintela
migration.h is not included in any includes now. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-05-18migration: Export qemu-file-channel.c functions in its own fileJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-05-18migration: Split migration/channel.c for channel operationsJuan Quintela
Create an include for its exported functions. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> --- Add proper header
2017-05-18migration: Create migration/xbzrle.hJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-05-18block migration: Allow compile time disableDr. David Alan Gilbert
Many users now prefer to use drive_mirror over NBD as an alternative to the older migrate -b option; drive_mirror is more complex to setup but gives you more options (e.g. only migrating some of the disks if some of them are shared). Allow the large chunk of block migration code to be compiled out for those who don't use it. Based on a downstream-patch we've had for a while by Jeff Cody. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> -- - When compiled out, allow seting block only with false value (eric)
2017-05-18migration: Remove old MigrationParamsJuan Quintela
Not used anymore after moving block migration to use capabilities. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: zhanghailiang <zhang.zhanghailiang@huawei.com> Reviewed-by: Peter Xu <peterx@redhat.com>
2017-05-18migration: Remove use of old MigrationParamsJuan Quintela
We have change in the previous patch to use migration capabilities for it. Notice that we continue using the old command line flags from migrate command from the time being. Remove the set_params method as now it is empty. For savevm, one can't do a: savevm -b/-i foo but now one can do: migrate_set_capability block on savevm foo And we can't use block migration. We could disable block capability unconditionally, but it would not be much better. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> --- - Maintain shared/enabled dependency (Xu suggestion) - Now we maintain the dependency on the setter functions - improve error messages
2017-05-18migration: Create block capabilityJuan Quintela
Create one capability for block migration and one parameter for incremental block migration. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> --- - address all Markus comments - use Markus and Eric text descriptions - change logic another time - improve text messages
2017-05-18hmp: Use visitor api for hmp_migrate_set_parameter()Juan Quintela
We only use it for int64 at this point, I am not able to find a way to parse an int with MiB units. Signed-off-by: Juan Quintela <quintela@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com>
2017-05-18postcopy: Require RAMBlocks that are whole pagesDr. David Alan Gilbert
It turns out that it's legal to create a VM with RAMBlocks that aren't a multiple of the pagesize in use; e.g. a 1025M main memory using 2M host pages. That breaks postcopy's atomic placement of pages, so disallow it. Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-05-18migration: Fix non-multiple of page size migrationDr. David Alan Gilbert
Unfortunately it's legal to create a VM with a RAM size that's not a multiple of the underlying host page or huge page size. Recently I'd changed things to always send host sized pages, and that breaks if we have say a 1025MB guest on 2MB hugepages. Unfortunately we can't just make that illegal since it would break migration from/to existing oddly configured VMs. Symptom: qemu-system-x86_64: Illegal RAM offset 40100000 as it transmits the fraction of the hugepage after the end of the RAMBlock (may also cause a crash on the source - possibly due to clearing bits after the bitmap) Reported-by: Yumei Huang <yuhuang@redhat.com> Red Hat bug: https://bugzilla.redhat.com/show_bug.cgi?id=1449037 Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Reviewed-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Juan Quintela <quintela@redhat.com>
2017-05-18Merge remote-tracking branch 'dgilbert/tags/pull-hmp-20170517' into stagingStefan Hajnoczi
HMP pull # gpg: Signature made Wed 17 May 2017 07:03:39 PM BST # gpg: using RSA key 0x0516331EBC5BFDE7 # gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7 * dgilbert/tags/pull-hmp-20170517: ramblock: add new hmp command "info ramblock" utils: provide size_to_str() ramblock: add RAMBLOCK_FOREACH() Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-18Merge remote-tracking branch 'quintela/tags/migration/20170517' into stagingStefan Hajnoczi
migration/next for 20170517 # gpg: Signature made Wed 17 May 2017 11:46:36 AM BST # gpg: using RSA key 0xF487EF185872D723 # gpg: Good signature from "Juan Quintela <quintela@redhat.com>" # gpg: aka "Juan Quintela <quintela@trasno.org>" # Primary key fingerprint: 1899 FF8E DEBF 58CC EE03 4B82 F487 EF18 5872 D723 * quintela/tags/migration/20170517: migration: Move check_migratable() into qdev.c migration: Move postcopy stuff to postcopy-ram.c migration: Move page_cache.c to migration/ migration: Create migration/blocker.h ram: Rename RAM_SAVE_FLAG_COMPRESS to RAM_SAVE_FLAG_ZERO migration: Pass Error ** argument to {save,load}_vmstate migration: Fix regression with compression threads Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-18Merge remote-tracking branch 'mst/tags/for_upstream' into stagingStefan Hajnoczi
pci, virtio, vhost: fixes A bunch of fixes that missed the release. Most notably we are reverting shpc back to enabled by default state as guests uses that as an indicator that hotplug is supported (even though it's unused). Unfortunately we can't fix this on the stable branch since that would break migration. Signed-off-by: Michael S. Tsirkin <mst@redhat.com> # gpg: Signature made Wed 17 May 2017 10:42:06 PM BST # gpg: using RSA key 0x281F0DB8D28D5469 # gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" # gpg: aka "Michael S. Tsirkin <mst@redhat.com>" # Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67 # Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469 * mst/tags/for_upstream: exec: abstract address_space_do_translate() pci: deassert intx when pci device unrealize virtio: allow broken device to notify guest Revert "hw/pci: disable pci-bridge's shpc by default" acpi-defs: clean up open brace usage ACPI: don't call acpi_pcihp_device_plug_cb on xen iommu: Don't crash if machine is not PC_MACHINE pc: add 2.10 machine type pc/fwcfg: unbreak migration from qemu-2.5 and qemu-2.6 during firmware boot libvhost-user: fix crash when rings aren't ready hw/virtio: fix vhost user fails to startup when MQ hw/arm/virt: generate 64-bit addressable ACPI objects hw/acpi-defs: replace leading X with x_ in FADT field names Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-18exec: abstract address_space_do_translate()Peter Xu
This function is an abstraction helper for address_space_translate() and address_space_get_iotlb_entry(). It does the lookup of address into memory region section, then does proper IOMMU translation if necessary. Refactor the two existing functions to use it. This fixes vhost when IOMMU is disabled by guest. Tested-by: Maxime Coquelin <maxime.coquelin@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-05-18pci: deassert intx when pci device unrealizeHerongguang (Stephen)
If a pci device is not reset by VM (by writing into config space) and unplugged by VM, after that when VM reboots, qemu may assert: pcibus_reset: Assertion `bus->irq_count[i] == 0' failed Cc: qemu-stable@nongnu.org Signed-off-by: herongguang <herongguang.he@huawei.com> Reviewed-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-05-18virtio: allow broken device to notify guestGreg Kurz
According to section 2.1.2 of the virtio-1 specification: "The device SHOULD set DEVICE_NEEDS_RESET when it enters an error state that a reset is needed. If DRIVER_OK is set, after it sets DEVICE_NEEDS_RESET, the device MUST send a device configuration change notification to the driver." Commit "f5ed36635d8f virtio: stop virtqueue processing if device is broken" introduced a virtio_error() call that just does that: - internally mark the device as broken - set the DEVICE_NEEDS_RESET bit in the status - send a configuration change notification Unfortunately, virtio_notify_vector(), called by virtio_notify_config(), returns right away when the device is marked as broken and the notification isn't sent in this case. The spec doesn't say whether a broken device can send notifications in other situations or not. But since the driver isn't supposed to do anything but to reset the device, it makes sense to keep the check in virtio_notify_config(). Marking the device as broken AFTER the configuration change notification was sent is enough to fix the issue. Signed-off-by: Greg Kurz <groug@kaod.org> Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
2017-05-18Revert "hw/pci: disable pci-bridge's shpc by default"Marcel Apfelbaum
This reverts commit dc0ae767700c156894e36fab89a745a2dc4173de. Disabling the shpc controller has an undesired side effect. The PCI bridge remains with no attached devices at boot time, and the guest operating systems do not allocate any resources for it, leaving the bridge unusable. Note that the behaviour is dictated by the pci bridge specification. Revert the commit and leave the shpc controller even if is not actually used by any architecture. Slot 0 remains unusable at boot time. Keep shpc off for QEMU 2.9 machines. Signed-off-by: Marcel Apfelbaum <marcel@redhat.com> Reviewed-by: Paolo Bonzini <pbonzini@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2017-05-17ramblock: add new hmp command "info ramblock"Peter Xu
To dump information about ramblocks. It looks like: (qemu) info ramblock Block Name PSize Offset Used Total /objects/mem 2 MiB 0x0000000000000000 0x0000000080000000 0x0000000080000000 vga.vram 4 KiB 0x0000000080060000 0x0000000001000000 0x0000000001000000 /rom@etc/acpi/tables 4 KiB 0x00000000810b0000 0x0000000000020000 0x0000000000200000 pc.bios 4 KiB 0x0000000080000000 0x0000000000040000 0x0000000000040000 0000:00:03.0/e1000.rom 4 KiB 0x0000000081070000 0x0000000000040000 0x0000000000040000 pc.rom 4 KiB 0x0000000080040000 0x0000000000020000 0x0000000000020000 0000:00:02.0/vga.rom 4 KiB 0x0000000081060000 0x0000000000010000 0x0000000000010000 /rom@etc/table-loader 4 KiB 0x00000000812b0000 0x0000000000001000 0x0000000000001000 /rom@etc/acpi/rsdp 4 KiB 0x00000000812b1000 0x0000000000001000 0x0000000000001000 Ramblock is something hidden internally in QEMU implementation, and this command should only be used by mostly QEMU developers on RAM stuff. It is not a command suitable for QMP interface. So only HMP interface is provided for it. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1494562661-9063-4-git-send-email-peterx@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-05-17utils: provide size_to_str()Peter Xu
Moving the algorithm from print_type_size() into size_to_str() so that other component can also leverage it. With that, refactor print_type_size(). The assert() in that logic is removed though, since even UINT64_MAX would not overflow. Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1494562661-9063-3-git-send-email-peterx@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-05-17ramblock: add RAMBLOCK_FOREACH()Peter Xu
So that it can simplifies the iterators. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Peter Xu <peterx@redhat.com> Message-Id: <1494562661-9063-2-git-send-email-peterx@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2017-05-17Merge remote-tracking branch 'ehabkost/tags/x86-and-machine-pull-request' ↵Stefan Hajnoczi
into staging x86 and machine queue, 2017-05-17 # gpg: Signature made Wed 17 May 2017 02:37:54 PM BST # gpg: using RSA key 0x2807936F984DC5A6 # gpg: Good signature from "Eduardo Habkost <ehabkost@redhat.com>" # Primary key fingerprint: 5A32 2FD5 ABC4 D3DB ACCF D1AA 2807 936F 984D C5A6 * ehabkost/tags/x86-and-machine-pull-request: (22 commits) tests: Add [+-]feature and feature=on|off test cases s390-pcibus: No need to set user_creatable=false explicitly xen-sysdev: Remove user_creatable flag virtio-mmio: Remove user_creatable flag sysbus-ohci: Remove user_creatable flag hpet: Remove user_creatable flag generic-sdhci: Remove user_creatable flag esp: Remove user_creatable flag fw_cfg: Remove user_creatable flag unimplemented-device: Remove user_creatable flag isabus-bridge: Remove user_creatable flag allwinner-ahci: Remove user_creatable flag sysbus-ahci: Remove user_creatable flag kvmvapic: Remove user_creatable flag ioapic: Remove user_creatable flag kvmclock: Remove user_creatable flag pflash_cfi01: Remove user_creatable flag fdc: Remove user_creatable flag from sysbus-fdc & SUNW,fdtwo iommu: Remove FIXME comment about user_creatable=true xen-backend: Remove FIXME comment about user_creatable flag ... Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-22 15:50:42 +0000