aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-05-12Merge remote-tracking branch 'agraf/xen-next' into stagingAnthony Liguori
2011-05-09usb-linux: Add missing break statementStefan Weil
cppcheck report: usb-linux.c:661: warning: Redundant assignment of "len" in switch Cc: Hans de Goede <hdegoede@redhat.com> Cc: Gerd Hoffmann <kraxel@redhat.com> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-05-09usb-musb: uninline functionsGerd Hoffmann
Prototype without "inline" keyword breaks the build with some gcc versions. Noticed by Alexander Graf. Fix this by removing the inline keywork everywhere. Some functions can't be inlined anyway as the are referenced using function pointers. Beside that gcc does a pretty good job on auto-inlining these days. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-05-08irq: Privatize CPU_INTERRUPT_NMI.Richard Henderson
This interrupt name is used by i386, CRIS, and MicroBlaze. Copy the name into each target. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-05-08target-i386: Privatize some i386-specific interrupt names.Richard Henderson
SMI, VIRQ, INIT, SIPI, and MCE are all only used by the i386 port. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-05-08target-arm: Privatize CPU_INTERRUPT_FIQ.Richard Henderson
This interrupt name was only used by the ARM port. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-05-08irq: Remove CPU_INTERRUPT_TIMER.Richard Henderson
It is no longer used anywhere. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-05-08target-sparc: Do not check CPU_INTERRUPT_TIMER.Richard Henderson
This bit is never set, therefore we should not read it either. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-05-08target-mips: Do not check CPU_INTERRUPT_TIMER.Richard Henderson
This bit is never set, therefore we should not read it either. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-05-08irq: Introduce and use CPU_INTERRUPT_SSTEP_MASK.Richard Henderson
This mask contains all of the bits that should be ignored while single stepping in the debugger. The mask contains 2 bits that are not currently cleared, but are also never set. The bits are included in the mask for consistency in handling of the CPU_INTERRUPT_TGT_EXT_N bits. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-05-08irq: Introduce CPU_INTERRUPT_TGT_* defines.Richard Henderson
These defines will be place-holders for cpu-specific functionality. Generic code will, at the end of the patch series, no longer have to concern itself about how SMI, NMI, etc should be handled. Instead, generic code will know only that the interrupt is internal or external. Signed-off-by: Richard Henderson <rth@twiddle.net> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-05-08xen: Add Xen hypercall for sleep state in the cmos_s3 callback.Anthony PERARD
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-08xen: Set running state in xenstore.Anthony PERARD
This tells to the xen management tool that the machine can begin run. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-08xen: Initialize event channels and io ringsArun Sharma
Open and bind event channels; map ioreq and buffered ioreq rings. Signed-off-by: Arun Sharma <arun.sharma@intel.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-08vl.c: Introduce getter for shutdown_requested and reset_requested.Anthony PERARD
Introduce two functions qemu_shutdown_requested_get and qemu_reset_requested_get to get the value of shutdown/reset_requested without reset it. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-08pci: Use of qemu_put_ram_ptr in pci_add_option_rom.John Baboval
Prevent a deadlock caused by leaving a map cache bucket locked by the preceding qemu_get_ram_ptr() call. Signed-off-By: John Baboval <john.baboval@virtualcomputer.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-08configure: Always use 64bits target physical addresses with xen enabled.Anthony PERARD
With MapCache, we can handle a 64b target, even with a 32b host/qemu. So, we need to have target_phys_addr_t to 64bits. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-08Introduce qemu_put_ram_ptrAnthony PERARD
This function allows to unlock a ram_ptr give by qemu_get_ram_ptr. After a call to qemu_put_ram_ptr, the pointer may be unmap from QEMU when used with Xen. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-08xen: Adds a cap to the number of map cache entries.John Baboval
Adds a cap to the number of map cache entries. This prevents the map cache from overwhelming system memory. I also removed the bitmap macros and #included bitmap.h instead. Signed-off-By: John Baboval <john.baboval@virtualcomputer.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-08xen: Introduce the Xen mapcacheJun Nakajima
On IA32 host or IA32 PAE host, at present, generally, we can't create an HVM guest with more than 2G memory, because generally it's almost impossible for Qemu to find a large enough and consecutive virtual address space to map an HVM guest's whole physical address space. The attached patch fixes this issue using dynamic mapping based on little blocks of memory. Each call to qemu_get_ram_ptr makes a call to qemu_map_cache with the lock option, so mapcache will not unmap these ram_ptr. Blocks that do not belong to the RAM, but usually to a device ROM or to a framebuffer, are handled in a separate function. So the whole RAMBlock can be map. Signed-off-by: Jun Nakajima <jun.nakajima@intel.com> Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-08xen: Introduce Xen Interrupt ControllerAnthony PERARD
Every set_irq call makes a Xen hypercall. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-08piix_pci: Introduces Xen specific call for irq.Anthony PERARD
This patch introduces Xen specific call in piix_pci. The specific part for Xen is in write_config, set_irq and get_pirq. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-08pc, Disable vmport initialisation with Xen.Anthony PERARD
This is because there is not synchronisation of the vcpu register between Xen and QEMU, so vmport can't work properly. This patch introduces no_vmport parameter to pc_basic_device_init. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-08xen: Add xenfv machineAnthony PERARD
Introduce the Xen FV (Fully Virtualized) machine to Qemu, some more Xen specific call will be added in further patches. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-08pc_memory_init: Move memory calculation to the caller.Anthony PERARD
This patch moves above_4g_mem_size and below_4g_mem_size calculation in the caller of pc_memory_init (pc_init1). And the prototype of pc_memory_init is changed because there is no need anymore to have variable pointer and the ram_size parameter. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-08xen: Add initialisation of XenAnthony PERARD
The xenpv machine use the common init function. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-08xen: Support new libxc calls from xen unstable.Anthony PERARD
This patch updates the libxenctrl calls in Qemu to use the new interface, otherwise Qemu wouldn't be able to build against new versions of the library. We check libxenctrl version in configure, from Xen 3.3.0 to Xen unstable. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-08xen: Make Xen build once.Anthony PERARD
xen_domainbuild and xen_machine_pv are built only for i386 targets. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-08xen: Replace some tab-indents with spaces (clean-up).Anthony PERARD
And put braces for blocks with a single statement. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Acked-by: Alexander Graf <agraf@suse.de> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-08machine, Add default_machine_opts to QEMUMachine.Anthony PERARD
With this new field, we can specified which accelerator use to run the machine, if the accelerator is not already specified by either a configuration file or the command line options. Currently, the only use will be made in the xenfv machine. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-08Introduce -machine command option.Anthony PERARD
This option gives the ability to switch one "accelerator" like kvm, xen or the default one tcg. We can specify more than one accelerator by separate them by a colon. QEMU will try each one and use the first whose works. So, ./qemu -machine accel=xen:kvm:tcg which would try Xen support first, then KVM and finally TCG if none of the other works. By default, QEMU will use TCG. But we can specify another default in the global configuration file. Signed-off-by: Anthony PERARD <anthony.perard@citrix.com> Signed-off-by: Alexander Graf <agraf@suse.de>
2011-05-05Merge remote-tracking branch 'mst/for_anthony' into stagingAnthony Liguori
2011-05-05Merge remote-tracking branch 'kraxel/usb.7.pull' into stagingAnthony Liguori
2011-05-05Merge remote branch 'origin/master' into pciMichael S. Tsirkin
Conflicts: exec.c
2011-05-05CPUPhysMemoryClient: Pass guest physical address not region offsetAlex Williamson
When we're trying to get a newly registered phys memory client updated with the current page mappings, we end up passing the region offset (a ram_addr_t) as the start address rather than the actual guest physical memory address (target_phys_addr_t). If your guest has less than 3.5G of memory, these are coincidentally the same thing. If there's more, the region offset for the memory above 4G starts over at 0, so the set_memory client will overwrite it's lower memory entries. Instead, keep track of the guest phsyical address as we're walking the tables and pass that to the set_memory client. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-05-05CPUPhysMemoryClient: Fix typo in phys memory client registrationAlex Williamson
When we register a physical memory client, we try to walk the page tables, calling the set_memory hook for every entry. Effectively playing catchup for the client for everything already registered. With this type, we only walk the 2nd entry of the l1 table, typically missing all of the registered memory. Signed-off-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-05-05pci: Add class 0x403 as 'audio controller'Jan Kiszka
Used by HD audio controllers like our intel-hda. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-05-05MSI: Robust resource releaseJan Kiszka
msi_init may fail, so we need to check on uninit if the cap was actually installed. This also avoids that the users need to check. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-05-05eepro100: Support 32 bit read/write access to flash registerStefan Weil
Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-05-05eepro100: Support byte read access to general control registerStefan Weil
The general control register is a byte register. Add support for byte reads. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-05-05eepro100: Support byte/word read/write access to MDI control registerStefan Weil
MDI control is a 32 bit register, but may be read or written using 8 or 16 bit access. Data is latched when the MSB is written. Add support for byte/word read/write access. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-05-05eepro100: Support byte/word writes to pointer registerStefan Weil
pointer is a 32 bit register, but may be written using 8 or 16 bit writes. Add support for byte/word writes. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-05-05eepro100: Support byte/word writes to port addressStefan Weil
port is a 32 bit register, but may be written using 8 or 16 bit writes. Add support for byte/word writes. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-05-05eepro100: Fix endianness issuesStefan Weil
Like other Intel devices, e100 (eepro100) uses little endian byte order. This patch was tested with these combinations: i386 host, i386 + mipsel guests (le-le) mipsel host, i386 guest (le-le) i386 host, mips + ppc guests (le-be) mips host, i386 guest (be-le) mips and mipsel hosts were emulated machines. v2: Use prefix for new functions. Add the same prefix to stl_le_phys. Fix alignment of mem (needed for word/dword reads/writes). Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-05-05eepro100: Pad received short framesStefan Weil
QEMU sends frames smaller than 60 bytes to ethernet nics. Such frames are rejected by real NICs and their emulations. To avoid this behaviour, other NIC emulations pad received frames. This patch enables this workaround for eepro100, too. All related code is marked with CONFIG_PAD_RECEIVED_FRAMES, so we can drop this in case QEMU's networking code is ever changed. Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-05-05eepro100: Remove unused structure elementStefan Weil
cppcheck reports that 'packet' is unused. It was only used to calculate the size of the preceding data. Removing it saves a lot of stack space (local variable rx). Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-05-05eepro100: Remove type casts which are no longer neededStefan Weil
Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-05-05eepro100: Avoid duplicate debug messagesStefan Weil
When DEBUG_EEPRO100 was enabled, unsupported writes were logged twice. Now logging in eepro100_write1 and eepro100_write2 is similar to the logging in eepro100_write4 (which already was correct). Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-05-04usb: mass storage fixGerd Hoffmann
Initialize scsi_len with zero when starting a new request, so any stuff leftover from the previous request is cleared out. This may happen in case the data returned by the scsi command doesn't fit into the buffer provided by the guest. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2011-05-04usb: move complete callback to port opsGerd Hoffmann
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-27 18:00:28 +0000