aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2021-03-18block: remove dirty bitmaps 'status' fieldDaniel P. Berrangé
The same information is available via the 'recording' and 'busy' fields. Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-18block: remove 'encryption_key_missing' flag from QAPIDaniel P. Berrangé
This has been hardcoded to "false" since 2.10.0, since secrets required to unlock block devices are now always provided up front instead of using interactive prompts. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-18hw/scsi: remove 'scsi-disk' deviceDaniel P. Berrangé
The 'scsi-hd' and 'scsi-cd' devices provide suitable alternatives. Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-18hw/ide: remove 'ide-drive' deviceDaniel P. Berrangé
The 'ide-hd' and 'ide-cd' devices provide suitable alternatives. Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-18chardev: reject use of 'wait' flag for socket client chardevsDaniel P. Berrangé
This only makes sense conceptually when used with listener chardevs. Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-18machine: remove 'arch' field from 'query-cpus-fast' QMP commandDaniel P. Berrangé
Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-18machine: remove 'query-cpus' QMP commandDaniel P. Berrangé
The newer 'query-cpus-fast' command avoids side effects on the guest execution. Note that some of the field names are different in the 'query-cpus-fast' command. Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Tested-by: Wainer dos Santos Moschetta <wainersm@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-18migrate: remove QMP/HMP commands for speed, downtime and cache sizeDaniel P. Berrangé
The generic 'migrate_set_parameters' command handle all types of param. Only the QMP commands were documented in the deprecations page, but the rationale for deprecating applies equally to HMP, and the replacements exist. Furthermore the HMP commands are just shims to the QMP commands, so removing the latter breaks the former unless they get re-implemented. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-18monitor: remove 'query-events' QMP commandDaniel P. Berrangé
The code comment suggests removing QAPIEvent_(str|lookup) symbols too, however, these are both auto-generated as standard for any enum in QAPI. As such it they'll exist whether we use them or not. Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Thomas Huth <thuth@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-18monitor: raise error when 'pretty' option is used with HMPDaniel P. Berrangé
This is only semantically useful for QMP. Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-18ui, monitor: remove deprecated VNC ACL option and HMP commandsDaniel P. Berrangé
The VNC ACL concept has been replaced by the pluggable "authz" framework which does not use monitor commands. Reviewed-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
2021-03-17Merge remote-tracking branch 'remotes/mcayland/tags/qemu-openbios-20210316' ↵Peter Maydell
into staging qemu-openbios queue # gpg: Signature made Tue 16 Mar 2021 20:36:15 GMT # gpg: using RSA key CC621AB98E82200D915CC9C45BC2C56FAE0F321F # gpg: issuer "mark.cave-ayland@ilande.co.uk" # gpg: Good signature from "Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>" [full] # Primary key fingerprint: CC62 1AB9 8E82 200D 915C C9C4 5BC2 C56F AE0F 321F * remotes/mcayland/tags/qemu-openbios-20210316: Update OpenBIOS images to 4a004110 built from submodule. Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-17Merge remote-tracking branch 'remotes/awilliam/tags/vfio-update-20210316.0' ↵Peter Maydell
into staging VFIO update 2021-03-16 * Fix "listerner" typo (Zenghui Yu) * Inclusive language and MAINTAINERS update (Philippe Mathieu-Daudé) * vIOMMU unmap notifier fixes (Eric Auger) * Migration fixes and optimizations (Shenming Lu) * Use host page size for dirty bitmap (Kunkun Jiang) * Use log_global_start/stop to switch dirty tracking (Keqian Zhu) # gpg: Signature made Tue 16 Mar 2021 16:59:10 GMT # gpg: using RSA key 239B9B6E3BB08B22 # gpg: Good signature from "Alex Williamson <alex.williamson@redhat.com>" [full] # gpg: aka "Alex Williamson <alex@shazbot.org>" [full] # gpg: aka "Alex Williamson <alwillia@redhat.com>" [full] # gpg: aka "Alex Williamson <alex.l.williamson@gmail.com>" [full] # Primary key fingerprint: 42F6 C04E 540B D1A9 9E7B 8A90 239B 9B6E 3BB0 8B22 * remotes/awilliam/tags/vfio-update-20210316.0: vfio/migrate: Move switch of dirty tracking into vfio_memory_listener vfio: Support host translation granule size vfio: Avoid disabling and enabling vectors repeatedly in VFIO migration vfio: Set the priority of the VFIO VM state change handler explicitly vfio: Move the saving of the config space to the right place in VFIO migration spapr_iommu: Fix vhost integration regression vfio: Do not register any IOMMU_NOTIFIER_DEVIOTLB_UNMAP notifier MAINTAINERS: Cover docs/igd-assign.txt in VFIO section hw/vfio/pci-quirks: Replace the word 'blacklist' vfio: Fix vfio_listener_log_sync function name typo Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-17Merge remote-tracking branch 'remotes/cschoenebeck/tags/pull-9p-20210316' ↵Peter Maydell
into staging 9pfs: code cleanup * Use lock-guard design pattern instead of manual lock/unlock. # gpg: Signature made Tue 16 Mar 2021 10:49:09 GMT # gpg: using RSA key 96D8D110CF7AF8084F88590134C2B58765A47395 # gpg: issuer "qemu_oss@crudebyte.com" # gpg: Good signature from "Christian Schoenebeck <qemu_oss@crudebyte.com>" [unknown] # gpg: WARNING: This key is not certified with a trusted signature! # gpg: There is no indication that the signature belongs to the owner. # Primary key fingerprint: ECAB 1A45 4014 1413 BA38 4926 30DB 47C3 A012 D5F4 # Subkey fingerprint: 96D8 D110 CF7A F808 4F88 5901 34C2 B587 65A4 7395 * remotes/cschoenebeck/tags/pull-9p-20210316: hw/9pfs/9p-synth: Replaced qemu_mutex_lock with QEMU_LOCK_GUARD Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-17Merge remote-tracking branch ↵Peter Maydell
'remotes/kraxel/tags/audio-20210316-pull-request' into staging coreaudio fixes and cleanups. # gpg: Signature made Tue 16 Mar 2021 10:47:36 GMT # gpg: using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/audio-20210316-pull-request: coreaudio: Handle output device change coreaudio: Extract device operations coreaudio: Drop support for macOS older than 10.6 Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-17Merge remote-tracking branch 'remotes/cohuck-gitlab/tags/s390x-20210316' ↵Peter Maydell
into staging s390x updates: - get rid of legacy_s390_alloc() and phys_mem_set_alloc() - tcg: implement the MVPG condition-code-option bit - fix g_autofree variable handing in the pci vfio code - use official z15 names in the cpu model definitions # gpg: Signature made Tue 16 Mar 2021 10:04:21 GMT # gpg: using RSA key C3D0D66DC3624FF6A8C018CEDECF6B93C6F02FAF # gpg: issuer "cohuck@redhat.com" # gpg: Good signature from "Cornelia Huck <conny@cornelia-huck.de>" [unknown] # gpg: aka "Cornelia Huck <huckc@linux.vnet.ibm.com>" [full] # gpg: aka "Cornelia Huck <cornelia.huck@de.ibm.com>" [full] # gpg: aka "Cornelia Huck <cohuck@kernel.org>" [unknown] # gpg: aka "Cornelia Huck <cohuck@redhat.com>" [unknown] # Primary key fingerprint: C3D0 D66D C362 4FF6 A8C0 18CE DECF 6B93 C6F0 2FAF * remotes/cohuck-gitlab/tags/s390x-20210316: s390x/pci: Add missing initialization for g_autofree variables target/s390x: Store r1/r2 for page-translation exceptions during MVPG target/s390x: Implement the MVPG condition-code-option bit s390x/cpu_model: use official name for 8562 exec: Get rid of phys_mem_set_alloc() s390x/kvm: Get rid of legacy_s390_alloc() Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-17Merge remote-tracking branch 'remotes/kraxel/tags/ui-20210316-pull-request' ↵Peter Maydell
into staging vnc+spice: password-secret option. bugfixes for cocoa, vnc, opengl. # gpg: Signature made Tue 16 Mar 2021 05:37:58 GMT # gpg: using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/ui-20210316-pull-request: ui/cocoa: Comment about modifier key input quirks ui: fold qemu_alloc_display in only caller ui: honour the actual guest display dimensions without rounding ui: use client width/height in WMVi message ui: avoid sending framebuffer updates outside client desktop bounds ui: add more trace points for VNC client/server messages ui/cocoa: Do not exit immediately after shutdown opengl: Do not convert format with glTexImage2D on OpenGL ES ui: deprecate "password" option for SPICE server ui: introduce "password-secret" option for SPICE server ui: introduce "password-secret" option for VNC servers Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-17Merge remote-tracking branch 'remotes/vivier/tags/m68k-for-6.0-pull-request' ↵Peter Maydell
into staging m68k pull request 20210315 Add m68k virt machine # gpg: Signature made Mon 15 Mar 2021 20:41:51 GMT # gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C # gpg: issuer "laurent@vivier.eu" # gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full] # gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full] # gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full] # Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C * remotes/vivier/tags/m68k-for-6.0-pull-request: m68k: add Virtual M68k Machine m68k: add a system controller m68k: add an interrupt controller hw/intc: add goldfish-pic hw/char: add goldfish-tty Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-17Merge remote-tracking branch ↵Peter Maydell
'remotes/dgilbert-gitlab/tags/pull-virtiofs-20210315' into staging virtiofs and migration pull 2021-03-15 Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com> # gpg: Signature made Mon 15 Mar 2021 20:03:03 GMT # gpg: using RSA key 45F5C71B4A0CB7FB977A9FA90516331EBC5BFDE7 # gpg: Good signature from "Dr. David Alan Gilbert (RH2) <dgilbert@redhat.com>" [full] # Primary key fingerprint: 45F5 C71B 4A0C B7FB 977A 9FA9 0516 331E BC5B FDE7 * remotes/dgilbert-gitlab/tags/pull-virtiofs-20210315: migration: Replaced qemu_mutex_lock calls with QEMU_LOCK_GUARD monitor: Replaced qemu_mutex_lock calls with QEMU_LOCK_GUARD migration/tls: add error handling in multifd_tls_handshake_thread migration/tls: fix inverted semantics in multifd_channel_connect virtiofsd: Convert some functions to return bool virtiofsd: Don't allow empty paths in lookup_name() virtiofsd: Don't allow empty filenames virtiofsd: Add qemu version and copyright info virtiofsd: Release vu_dispatch_lock when stopping queue Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-16Merge remote-tracking branch 'remotes/rth-gitlab/tags/pull-misc-20210315' ↵Peter Maydell
into staging Fix qemu_strtosz testsuite failures for i686. # gpg: Signature made Mon 15 Mar 2021 18:49:12 GMT # gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F # gpg: issuer "richard.henderson@linaro.org" # gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full] # Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F * remotes/rth-gitlab/tags/pull-misc-20210315: utils: Use fixed-point arithmetic in qemu_strtosz Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-16Update OpenBIOS images to 4a004110 built from submodule.Mark Cave-Ayland
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
2021-03-16vfio/migrate: Move switch of dirty tracking into vfio_memory_listenerKeqian Zhu
For now the switch of vfio dirty page tracking is integrated into @vfio_save_handler. The reason is that some PCI vendor driver may start to track dirty base on _SAVING state of device, so if dirty tracking is started before setting device state, vfio will report full-dirty to QEMU. However, the dirty bmap of all ramblocks are fully set when setup ram saving, so it's not matter whether the device is in _SAVING state when start vfio dirty tracking. Moreover, this logic causes some problems [1]. The object of dirty tracking is guest memory, but the object of @vfio_save_handler is device state, which produces unnecessary coupling and conflicts: 1. Coupling: Their saving granule is different (perVM vs perDevice). vfio will enable dirty_page_tracking for each devices, actually once is enough. 2. Conflicts: The ram_save_setup() traverses all memory_listeners to execute their log_start() and log_sync() hooks to get the first round dirty bitmap, which is used by the bulk stage of ram saving. However, as vfio dirty tracking is not yet started, it can't get dirty bitmap from vfio. Then we give up the chance to handle vfio dirty page at bulk stage. Move the switch of vfio dirty_page_tracking into vfio_memory_listener can solve above problems. Besides, Do not require devices in SAVING state for vfio_sync_dirty_bitmap(). [1] https://www.spinics.net/lists/kvm/msg229967.html Reported-by: Zenghui Yu <yuzenghui@huawei.com> Signed-off-by: Keqian Zhu <zhukeqian1@huawei.com> Suggested-by: Paolo Bonzini <pbonzini@redhat.com> Message-Id: <20210309031913.11508-1-zhukeqian1@huawei.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2021-03-16vfio: Support host translation granule sizeKunkun Jiang
The cpu_physical_memory_set_dirty_lebitmap() can quickly deal with the dirty pages of memory by bitmap-traveling, regardless of whether the bitmap is aligned correctly or not. cpu_physical_memory_set_dirty_lebitmap() supports pages in bitmap of host page size. So it'd better to set bitmap_pgsize to host page size to support more translation granule sizes. [aw: The Fixes commit below introduced code to restrict migration support to configurations where the target page size intersects the host dirty page support. For example, a 4K guest on a 4K host. Due to the above flexibility in bitmap handling, this restriction unnecessarily prevents mixed target/host pages size that could otherwise be supported. Use host page size for dirty bitmap.] Fixes: 87ea529c502 ("vfio: Get migration capability flags for container") Signed-off-by: Kunkun Jiang <jiangkunkun@huawei.com> Message-Id: <20210304133446.1521-1-jiangkunkun@huawei.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2021-03-16vfio: Avoid disabling and enabling vectors repeatedly in VFIO migrationShenming Lu
In VFIO migration resume phase and some guest startups, there are already unmasked vectors in the vector table when calling vfio_msix_enable(). So in order to avoid inefficiently disabling and enabling vectors repeatedly, let's allocate all needed vectors first and then enable these unmasked vectors one by one without disabling. Signed-off-by: Shenming Lu <lushenming@huawei.com> Message-Id: <20210310030233.1133-4-lushenming@huawei.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2021-03-16vfio: Set the priority of the VFIO VM state change handler explicitlyShenming Lu
In the VFIO VM state change handler when stopping the VM, the _RUNNING bit in device_state is cleared which makes the VFIO device stop, including no longer generating interrupts. Then we can save the pending states of all interrupts in the GIC VM state change handler (on ARM). So we have to set the priority of the VFIO VM state change handler explicitly (like virtio devices) to ensure it is called before the GIC's in saving. Signed-off-by: Shenming Lu <lushenming@huawei.com> Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com> Reviewed-by: Cornelia Huck <cohuck@redhat.com> Message-Id: <20210310030233.1133-3-lushenming@huawei.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2021-03-16vfio: Move the saving of the config space to the right place in VFIO migrationShenming Lu
On ARM64 the VFIO SET_IRQS ioctl is dependent on the VM interrupt setup, if the restoring of the VFIO PCI device config space is before the VGIC, an error might occur in the kernel. So we move the saving of the config space to the non-iterable process, thus it will be called after the VGIC according to their priorities. As for the possible dependence of the device specific migration data on it's config space, we can let the vendor driver to include any config info it needs in its own data stream. Signed-off-by: Shenming Lu <lushenming@huawei.com> Reviewed-by: Kirti Wankhede <kwankhede@nvidia.com> Message-Id: <20210310030233.1133-2-lushenming@huawei.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2021-03-16spapr_iommu: Fix vhost integration regressionEric Auger
Previous work on dev-iotlb message broke spapr_iommu/vhost integration as it did for SMMU and virtio-iommu. The spapr_iommu currently only sends IOMMU_NOTIFIER_UNMAP notifications. Since commit 958ec334bca3 ("vhost: Unbreak SMMU and virtio-iommu on dev-iotlb support"), VHOST first tries to register IOMMU_NOTIFIER_DEVIOTLB_UNMAP notifier and if it fails, falls back to legacy IOMMU_NOTIFIER_UNMAP. So spapr_iommu must fail on the IOMMU_NOTIFIER_DEVIOTLB_UNMAP registration. Reported-by: Peter Xu <peterx@redhat.com> Fixes: b68ba1ca5767 ("memory: Add IOMMU_NOTIFIER_DEVIOTLB_UNMAP IOMMUTLBNotificationType") Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-Id: <20210209213233.40985-3-eric.auger@redhat.com> Acked-by: David Gibson <david@gibson.dropbear.id.au> Acked-by: Jason Wang <jasowang@redhat.com> Reviewed-by: Michael S. Tsirkin <mst@redhat.com> Reviewed-by: Greg Kurz <groug@kaod.org> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2021-03-16vfio: Do not register any IOMMU_NOTIFIER_DEVIOTLB_UNMAP notifierEric Auger
In an attempt to fix smmu/virtio-iommu - vhost regression, commit 958ec334bca3 ("vhost: Unbreak SMMU and virtio-iommu on dev-iotlb support") broke virtio-iommu integration. This is due to the fact VFIO registers IOMMU_NOTIFIER_ALL notifiers, which includes IOMMU_NOTIFIER_DEVIOTLB_UNMAP and this latter now is rejected by the virtio-iommu. As a consequence, the registration fails. VHOST behaves like a device with an ATC cache. The VFIO device does not support this scheme yet. Let's register only legacy MAP and UNMAP notifiers. Fixes: 958ec334bca3 ("vhost: Unbreak SMMU and virtio-iommu on dev-iotlb support") Signed-off-by: Eric Auger <eric.auger@redhat.com> Message-Id: <20210209213233.40985-2-eric.auger@redhat.com> Acked-by: Jason Wang <jasowang@redhat.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2021-03-16MAINTAINERS: Cover docs/igd-assign.txt in VFIO sectionPhilippe Mathieu-Daudé
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210202155611.998424-1-philmd@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2021-03-16hw/vfio/pci-quirks: Replace the word 'blacklist'Philippe Mathieu-Daudé
Follow the inclusive terminology from the "Conscious Language in your Open Source Projects" guidelines [*] and replace the word "blacklist" appropriately. [*] https://github.com/conscious-lang/conscious-lang-docs/blob/main/faq.md Reviewed-by: Alex Williamson <alex.williamson@redhat.com> Acked-by: Alex Williamson <alex.williamson@redhat.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com> Message-Id: <20210205171817.2108907-9-philmd@redhat.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2021-03-16vfio: Fix vfio_listener_log_sync function name typoZenghui Yu
There is an obvious typo in the function name of the .log_sync() callback. Spell it correctly. Signed-off-by: Zenghui Yu <yuzenghui@huawei.com> Message-Id: <20201204014240.772-1-yuzenghui@huawei.com> Signed-off-by: Alex Williamson <alex.williamson@redhat.com>
2021-03-16Merge remote-tracking branch 'remotes/kraxel/tags/usb-20210315-pull-request' ↵Peter Maydell
into staging usb: -usbdevice cleanup and un-deprecation. usb: split usb-storage. usb: misc fixes and cleanups. # gpg: Signature made Mon 15 Mar 2021 18:02:28 GMT # gpg: using RSA key A0328CFFB93A17A79901FE7D4CB6D8EED3E87138 # gpg: Good signature from "Gerd Hoffmann (work) <kraxel@redhat.com>" [full] # gpg: aka "Gerd Hoffmann <gerd@kraxel.org>" [full] # gpg: aka "Gerd Hoffmann (private) <kraxel@gmail.com>" [full] # Primary key fingerprint: A032 8CFF B93A 17A7 9901 FE7D 4CB6 D8EE D3E8 7138 * remotes/kraxel/tags/usb-20210315-pull-request: usb/storage: clear csw on reset usb/storage: add kconfig symbols usb/storage move usb-storage device to separate source file usb/storage: move usb-bot device to separate source file usb/storage: move declarations to usb/msd.h header hw/usb: Extract VT82C686 UHCI PCI function into a new unit hw/usb/hcd-uhci: Expose generic prototypes to local header hw/southbridge: Add missing Kconfig dependency VT82C686 on USB_UHCI usb: Document the missing -usbdevice options usb: Un-deprecate -usbdevice (except for -usbdevice audio which gets removed) usb: remove '-usbdevice u2f-key' usb: remove support for -usbdevice parameters hw/usb/bus: Remove the "full-path" property Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2021-03-16Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into ↵Peter Maydell
staging # gpg: Signature made Mon 15 Mar 2021 08:42:25 GMT # gpg: using RSA key EF04965B398D6211 # gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" [marginal] # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211 * remotes/jasowang/tags/net-pull-request: net: Do not fill legacy info_str for backends hmp: Use QAPI NetdevInfo in hmp_info_network net: Move NetClientState.info_str to dynamic allocations tests: Add tests for query-netdev command qapi: net: Add query-netdev command pvrdma: wean code off pvrdma_ring.h kernel header lan9118: switch to use qemu_receive_packet() for loopback cadence_gem: switch to use qemu_receive_packet() for loopback pcnet: switch to use qemu_receive_packet() for loopback rtl8139: switch to use qemu_receive_packet() for loopback tx_pkt: switch to use qemu_receive_packet_iov() for loopback sungem: switch to use qemu_receive_packet() for loopback msf2-mac: switch to use qemu_receive_packet() for loopback dp8393x: switch to use qemu_receive_packet() for loopback packet e1000: switch to use qemu_receive_packet() for loopback net: introduce qemu_receive_packet() e1000: fail early for evil descriptor net: validate that ids are well formed net: Fix build error when DEBUG_NET is on virtio-net: calculating proper msix vectors on init Signed-off-by: Peter Maydell <peter.maydell@linaro.org> # Conflicts: # hw/core/machine.c
2021-03-16hw/9pfs/9p-synth: Replaced qemu_mutex_lock with QEMU_LOCK_GUARDMahmoud Mandour
Replaced a call to qemu_mutex_lock and its respective call to qemu_mutex_unlock and used QEMU_LOCK_GUARD macro in their place. This simplifies the code by removing the call required to unlock and also eliminates goto paths. Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com> Acked-by: Greg Kurz <groug@kaod.org> Reviewed-by: Christian Schoenebeck <qemu_oss@crudebyte.com> Message-Id: <20210311031538.5325-9-ma.mandourr@gmail.com> Signed-off-by: Christian Schoenebeck <qemu_oss@crudebyte.com>
2021-03-16coreaudio: Handle output device changeAkihiko Odaki
An output device change can occur when plugging or unplugging an earphone. Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com> Message-Id: <20210311151512.22096-3-akihiko.odaki@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2021-03-16coreaudio: Extract device operationsAkihiko Odaki
This change prepare to support dynamic device changes, which requires to perform device initialization/deinitialization multiple times. Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com> Message-Id: <20210311151512.22096-2-akihiko.odaki@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2021-03-16coreaudio: Drop support for macOS older than 10.6Akihiko Odaki
Mac OS X 10.6 was released in 2009. Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com> Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Message-Id: <20210311151512.22096-1-akihiko.odaki@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2021-03-16ui/cocoa: Comment about modifier key input quirksAkihiko Odaki
Based-on: <20210310042348.21931-1-akihiko.odaki@gmail.com> Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com> Message-Id: <20210312133212.3131-1-akihiko.odaki@gmail.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2021-03-16ui: fold qemu_alloc_display in only callerMarc-André Lureau
A minor code simplification. Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com> Message-Id: <20210312100108.2706195-2-marcandre.lureau@redhat.com> Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
2021-03-15m68k: add Virtual M68k MachineLaurent Vivier
The machine is based on Goldfish interfaces defined by Google for Android simulator. It uses Goldfish-rtc (timer and RTC), Goldfish-pic (PIC) and Goldfish-tty (for serial port and early tty). The machine is created with 128 virtio-mmio bus, and they can be used to use serial console, GPU, disk, NIC, HID, ... Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210312214145.2936082-6-laurent@vivier.eu>
2021-03-15m68k: add a system controllerLaurent Vivier
Add a system controller for the m68k-virt machine. This controller allows the kernel to power off or reset the machine. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210312214145.2936082-5-laurent@vivier.eu>
2021-03-15m68k: add an interrupt controllerLaurent Vivier
A (generic) copy of the GLUE device we already have for q800 to use with the m68k-virt machine. The q800 one would disappear in the future as q800 uses actually the djMEMC controller. Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210312214145.2936082-4-laurent@vivier.eu>
2021-03-15hw/intc: add goldfish-picLaurent Vivier
Implement the goldfish pic device as defined in https://android.googlesource.com/platform/external/qemu/+/master/docs/GOLDFISH-VIRTUAL-HARDWARE.TXT Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210312214145.2936082-3-laurent@vivier.eu>
2021-03-15hw/char: add goldfish-ttyLaurent Vivier
Implement the goldfish tty device as defined in https://android.googlesource.com/platform/external/qemu/+/master/docs/GOLDFISH-VIRTUAL-HARDWARE.TXT and based on the kernel driver code: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/tty/goldfish.c Signed-off-by: Laurent Vivier <laurent@vivier.eu> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Tested-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-Id: <20210312214145.2936082-2-laurent@vivier.eu>
2021-03-15migration: Replaced qemu_mutex_lock calls with QEMU_LOCK_GUARDMahmoud Mandour
Replaced various qemu_mutex_lock calls and their respective qemu_mutex_unlock calls with QEMU_LOCK_GUARD macro. This simplifies the code by eliminating the respective qemu_mutex_unlock calls. Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com> Message-Id: <20210311031538.5325-7-ma.mandourr@gmail.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-03-15monitor: Replaced qemu_mutex_lock calls with QEMU_LOCK_GUARDMahmoud Mandour
Removed various qemu_mutex_lock and their respective qemu_mutex_unlock calls and used lock guard macros (QEMU_LOCK_GUARD and WITH_QEMU_LOCK_GUARD). This simplifies the code by eliminating qemu_mutex_unlock calls. Signed-off-by: Mahmoud Mandour <ma.mandourr@gmail.com> Message-Id: <20210311031538.5325-6-ma.mandourr@gmail.com> Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-03-15migration/tls: add error handling in multifd_tls_handshake_threadHao Wang
If any error happens during multifd send thread creating (e.g. channel broke because new domain is destroyed by the dst), multifd_tls_handshake_thread may exit silently, leaving main migration thread hanging (ram_save_setup -> multifd_send_sync_main -> qemu_sem_wait(&p->sem_sync)). Fix that by adding error handling in multifd_tls_handshake_thread. Signed-off-by: Hao Wang <wanghao232@huawei.com> Message-Id: <20210209104237.2250941-3-wanghao232@huawei.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Chuan Zheng <zhengchuan@huawei.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-03-15migration/tls: fix inverted semantics in multifd_channel_connectHao Wang
Function multifd_channel_connect() return "true" to indicate failure, which is rather confusing. Fix that. Signed-off-by: Hao Wang <wanghao232@huawei.com> Message-Id: <20210209104237.2250941-2-wanghao232@huawei.com> Reviewed-by: Daniel P. Berrangé <berrange@redhat.com> Reviewed-by: Chuan Zheng <zhengchuan@huawei.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-03-15virtiofsd: Convert some functions to return boolGreg Kurz
Both currently only return 0 or 1. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <20210312141003.819108-3-groug@kaod.org> Reviewed-by: Connor Kuehl <ckuehl@redhat.com> Reviewed-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
2021-03-15virtiofsd: Don't allow empty paths in lookup_name()Greg Kurz
When passed an empty filename, lookup_name() returns the inode of the parent directory, unless the parent is the root in which case the st_dev doesn't match and lo_find() returns NULL. This is because lookup_name() passes AT_EMPTY_PATH down to fstatat() or statx(). This behavior doesn't quite make sense because users of lookup_name() then pass the name to unlinkat(), renameat() or renameat2(), all of which will always fail on empty names. Drop AT_EMPTY_PATH from the flags in lookup_name() so that it has the consistent behavior of "returning an existing child inode or NULL" for all directories. Signed-off-by: Greg Kurz <groug@kaod.org> Message-Id: <20210312141003.819108-2-groug@kaod.org> Reviewed-by: Connor Kuehl <ckuehl@redhat.com> Reviewed-by: Vivek Goyal <vgoyal@redhat.com> Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-01-15 20:32:36 +0000