aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-03-30hw/gpio: Add the emulation of gpio_keyShannon Zhao
This will be used by ARM virt machine as a power button. Signed-off-by: Shannon Zhao <shannon.zhao@linaro.org> Message-id: 1458221140-15232-2-git-send-email-zhaoshenglong@huawei.com [PMM: Use hyphen rather than underscore in type names; add a comment briefly describing what the device does] Reviewed-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-30Merge remote-tracking branch 'remotes/lalrae/tags/mips-20160329-2' into stagingPeter Maydell
MIPS patches 2016-03-29 Changes: * add initial MIPS CPS support * implement ITU block * implement MAAR # gpg: Signature made Wed 30 Mar 2016 09:27:01 BST using RSA key ID 0B29DA6B # gpg: Good signature from "Leon Alrae <leon.alrae@imgtec.com>" * remotes/lalrae/tags/mips-20160329-2: (21 commits) target-mips: add MAAR, MAARI register target-mips: use CP0_CHECK for gen_m{f|t}hc0 hw/mips/cps: enable ITU for multithreading processors target-mips: make ITC Configuration Tags accessible to the CPU target-mips: check CP0 enabled for CACHE instruction also in R6 hw/mips: implement ITC Storage - Bypass View hw/mips: implement ITC Storage - P/V Sync and Try Views hw/mips: implement ITC Storage - Empty/Full Sync and Try Views hw/mips: implement ITC Storage - Control View hw/mips: implement ITC Configuration Tags and Storage Cells target-mips: enable CM GCR in MIPS64R6-generic CPU hw/mips_malta: add CPS to Malta board hw/mips_malta: move CPU creation to a separate function hw/mips_malta: remove redundant irq and clock init hw/mips_malta: remove CPUMIPSState from the write_bootloader() hw/mips/cps: create CPC block inside CPS hw/mips: add initial Cluster Power Controller support hw/mips/cps: create GCR block inside CPS hw/mips: add initial Global Config Register support target-mips: add CMGCRBase register ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-30Merge remote-tracking branch ↵Peter Maydell
'remotes/berrange/tags/pull-qcrypto-2016-03-30-1' into staging Merge qcrypto fixes 2016/03/30 v1 # gpg: Signature made Wed 30 Mar 2016 14:59:19 BST using RSA key ID 15104FDF # gpg: Good signature from "Daniel P. Berrange <dan@berrange.com>" # gpg: aka "Daniel P. Berrange <berrange@redhat.com>" * remotes/berrange/tags/pull-qcrypto-2016-03-30-1: crypto: do an explicit check for nettle pbkdf functions Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-30crypto: do an explicit check for nettle pbkdf functionsDaniel P. Berrange
Support for the PBKDF functions in nettle was not introduced until version 2.6. Some distros QEMU targets have older versions and thus lack PBKDF support. Address this by doing a check in configure for the desired function and then skipping compilation of the nettle-pbkdf.o module Reported-by: Wen Congyang <wency@cn.fujitsu.com> Tested-by: Wen Congyang <wency@cn.fujitsu.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
2016-03-30Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into stagingPeter Maydell
Block layer patches # gpg: Signature made Wed 30 Mar 2016 11:57:54 BST using RSA key ID C88F2FD6 # gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" * remotes/kevin/tags/for-upstream: (48 commits) iotests: Test qemu-img convert -S 0 behavior block/null-{co,aio}: Implement get_block_status() block/null-{co,aio}: Allow reading zeroes qemu-img: Fix preallocation with -S 0 for convert block: Remove bdrv_(set_)enable_write_cache() block: Remove BDRV_O_CACHE_WB block: Remove bdrv_parse_cache_flags() qemu-io: Use bdrv_parse_cache_mode() in reopen_f() block: Use bdrv_parse_cache_mode() in drive_init() raw: Support BDRV_REQ_FUA nbd: Support BDRV_REQ_FUA iscsi: Support BDRV_REQ_FUA block: Introduce bdrv_co_writev_flags() block/qapi: Use blk_enable_write_cache() block: Move enable_write_cache to BB level block: Handle flush error in bdrv_pwrite_sync() block: Always set writeback mode in blk_new_open() block: blockdev_init(): Call blk_set_enable_write_cache() explicitly xen_disk: Call blk_set_enable_write_cache() explicitly qemu-img: Call blk_set_enable_write_cache() explicitly ... Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-30Merge remote-tracking branch 'remotes/jasowang/tags/net-pull-request' into ↵Peter Maydell
staging # gpg: Signature made Wed 30 Mar 2016 02:07:15 BST using RSA key ID 398D6211 # gpg: Good signature from "Jason Wang (Jason Wang on RedHat) <jasowang@redhat.com>" # gpg: WARNING: This key is not certified with sufficiently trusted signatures! # gpg: It is not certain that the signature belongs to the owner. # Primary key fingerprint: 215D 46F4 8246 689E C77F 3562 EF04 965B 398D 6211 * remotes/jasowang/tags/net-pull-request: Revert "e1000: fix hang of win2k12 shutdown with flood ping" e1000: Fixing interrupts pace. tests/test-filter-redirector: Add unit test for filter-redirector net/filter-mirror: implement filter-redirector net/filter-mirror: Change filter_mirror_send interface tests/test-filter-mirror:add filter-mirror unit test net/filter-mirror:Add filter-mirror Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
2016-03-30iotests: Test qemu-img convert -S 0 behaviorMax Reitz
Passing -S 0 to qemu-img convert should result in all source data being copied to the output, even if that source data is known to be 0. The output image should therefore have exactly the same size on disk as an image which we explicitly filled with data. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-30block/null-{co,aio}: Implement get_block_status()Max Reitz
Signed-off-by: Max Reitz <mreitz@redhat.com> Acked-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-30block/null-{co,aio}: Allow reading zeroesMax Reitz
This is optional so that it does not impede the null block driver's performance unless this behavior is desired. Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Acked-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-30qemu-img: Fix preallocation with -S 0 for convertMax Reitz
When passing -S 0 to qemu-img convert, the target image is supposed to be fully allocated. Right now, this is not the case if the source image contains areas which bdrv_get_block_status() reports as being zero. This patch changes a zeroed area's status from BLK_ZERO to BLK_DATA before invoking convert_write() if -S 0 has been specified. In addition, the check whether convert_read() actually needs to do anything (basically only if the current area is a BLK_DATA area) is pulled out of that function to the caller. If -S 0 has been specified, zeroed areas need to be written as data to the output, thus they then have to be accounted when calculating the progress made. This patch changes the reference output for iotest 122; contrary to what it assumed, -S 0 really should allocate everything in the output, not just areas that are filled with zeros (as opposed to being zeroed). Signed-off-by: Max Reitz <mreitz@redhat.com> Reviewed-by: Fam Zheng <famz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-30block: Remove bdrv_(set_)enable_write_cache()Kevin Wolf
The only remaining users were block jobs (mirror and backup) which unconditionally enabled WCE on the BlockBackend of the target image. As these block jobs don't go through BlockBackend for their I/O requests, they aren't affected by this setting anyway but always get a writeback mode, so that call can be removed. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-03-30block: Remove BDRV_O_CACHE_WBKevin Wolf
The previous patches have successively made blk->enable_write_cache the true source for the information whether a writethrough mode must be implemented. The corresponding BDRV_O_CACHE_WB is only useless baggage we're carrying around, so now's the time to remove it. At the same time, we remove the 'cache.writeback' option parsing on the BDS level as the only effect was setting the BDRV_O_CACHE_WB flag. This change requires test cases that explicitly enabled the option to drop it. Other than that and the change of the error message when writethrough is enabled on the BDS level (from "Can't set writethrough mode" to "doesn't support the option"), there should be no change in behaviour. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-03-30block: Remove bdrv_parse_cache_flags()Kevin Wolf
All users are converted to bdrv_parse_cache_mode() now. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-03-30qemu-io: Use bdrv_parse_cache_mode() in reopen_f()Kevin Wolf
We must forbid changing the WCE flag in bdrv_reopen() in the same patch, as otherwise the behaviour would change so that the flag takes precedence over the explicitly specified option. The correct value of the WCE flag depends on the BlockBackend user (e.g. guest device) and isn't a decision that the QMP client makes, so this change is what we want. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-03-30block: Use bdrv_parse_cache_mode() in drive_init()Kevin Wolf
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-03-30raw: Support BDRV_REQ_FUAKevin Wolf
Pass through the FUA flag to the lower layer so that the separate flush can be saved in practically relevant cases where a (raw) format driver sits on top of the protocol driver. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-03-30nbd: Support BDRV_REQ_FUAKevin Wolf
The NBD server already used to send a FUA flag when the writethrough mode was set. This code was a remnant from the times where protocol drivers actually had to implement writethrough modes. Since nowadays the block layer sends flushes in writethrough mode and non-root nodes are always writeback, this was mostly dead code - only mostly because if NBD was configured to be used without a format, we sent _both_ FUA and an explicit flush afterwards, which makes the code not technically dead, but useless overhead. This patch changes the code so that the block layer's FUA flag is recognised and translated into a NBD FUA flag. The additional flush is avoided now. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-03-30iscsi: Support BDRV_REQ_FUAKevin Wolf
This replaces the existing hack in the iscsi driver that sent the FUA bit in writethrough mode and ignored the following flush in order to optimise the number of roundtrips (see commit 73b5394e). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-03-30block: Introduce bdrv_co_writev_flags()Kevin Wolf
This function will allow drivers to implement BDRV_REQ_FUA natively instead of sending a separate flush after the write. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-03-30block/qapi: Use blk_enable_write_cache()Kevin Wolf
Now that WCE is handled on the BlockBackend level, the flag is meaningless for BDSes. As the schema requires us to fill the field, we return an enabled write cache for them. Note that this means that querying the BlockBackend name may return writethrough as the cache information, whereas querying the node-name of the root of that same BlockBackend will return writeback. This may appear odd at first, but it actually makes sense because it correctly repesents the layer that implements the WCE handling. This becomes more apparent when you consider nodes that are the root node of multiple BlockBackends, where each BB can have its own WCE setting. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-03-30block: Move enable_write_cache to BB levelKevin Wolf
Whether a write cache is used or not is a decision that concerns the user (e.g. the guest device) rather than the backend. It was already logically part of the BB level as bdrv_move_feature_fields() always kept it on top of the BDS tree; with this patch, the core of it (the actual flag and the additional flushes) is also implemented there. Direct callers of bdrv_open() must pass BDRV_O_CACHE_WB now if bs doesn't have a BlockBackend attached. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-03-30block: Handle flush error in bdrv_pwrite_sync()Kevin Wolf
We don't want to silently ignore a flush error. Also, there is little point in avoiding the flush for writethrough modes and once WCE is moved to the BB layer, we definitely need the flush here because bdrv_pwrite() won't involve one any more. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-03-30block: Always set writeback mode in blk_new_open()Kevin Wolf
All callers of blk_new_open() either don't rely on the WCE bit set after blk_new_open() because they explicitly set it anyway, or they pass BDRV_O_CACHE_WB unconditionally. This patch changes blk_new_open() so that it always enables writeback mode and asserts that BDRV_O_CACHE_WB is clear. For those callers that used to pass BDRV_O_CACHE_WB unconditionally, the flag is removed now. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-03-30block: blockdev_init(): Call blk_set_enable_write_cache() explicitlyKevin Wolf
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-03-30xen_disk: Call blk_set_enable_write_cache() explicitlyKevin Wolf
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-03-30qemu-img: Call blk_set_enable_write_cache() explicitlyKevin Wolf
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-03-30qemu-img: Expand all BDRV_O_FLAGS usesKevin Wolf
It always only set the BDRV_O_CACHE_WB flag, which is going to go away. In order to make the next changes more local for better reviewability this patches expands the macro. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-03-30qemu-io: Call blk_set_enable_write_cache() explicitlyKevin Wolf
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-03-30qemu-nbd: Call blk_set_enable_write_cache() explicitlyKevin Wolf
Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-03-30block: Add bdrv_parse_cache_mode()Kevin Wolf
It's like bdrv_parse_cache_flags(), except that writethrough mode isn't included in the flags, but returned as a separate bool. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Max Reitz <mreitz@redhat.com>
2016-03-30replay: introduce block devices record/replayPavel Dovgalyuk
This patch introduces block driver that implement recording and replaying of block devices' operations. All block completion operations are added to the queue. Queue is flushed at checkpoints and information about processed requests is recorded to the log. In replay phase the queue is matched with events read from the log. Therefore block devices requests are processed deterministically. Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> [ kwolf: Rebased onto modified and already applied part of the series ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-30replay: fix error messagePavel Dovgalyuk
This patch fixes error message in saving loop of the asynchronous events queue. Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> [ kwolf: Fixed format string to use PRId64 instead of %d ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-30replay: bh scheduling fixPavel Dovgalyuk
This patch fixes scheduling of bottom halves when record/replay is enabled. Now BH are not added to replay queue when asynchronous events are disabled. This may happen in startup and loadvm/savevm phases of execution. Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-30block: add flush callbackPavel Dovgalyuk
This patch adds callback for flush request. This callback is responsible for flushing whole block devices stack. bdrv_flush function does not proceed to underlying devices. It should be performed by this callback function, if needed. Signed-off-by: Pavel Dovgalyuk <pavel.dovgaluk@ispras.ru> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-30block: an interoperability test for luks vs dm-crypt/cryptsetupDaniel P. Berrange
It is important that the QEMU luks implementation retains 100% compatibility with the reference implementation provided by the combination of the linux kernel dm-crypt module and cryptsetup userspace tools. There is a matrix of tests to be performed with different sets of encryption settings. For each matrix entry, two tests will be performed. One will create a LUKS image with the cryptsetup tool and then do I/O with both cryptsetup & qemu-io. The other will create the image with qemu-img and then again do I/O with both cryptsetup and qemu-io. The new I/O test 149 performs interoperability testing between QEMU and the reference implementation. Such testing inherantly requires elevated privileges, so to this this the user must have configured passwordless sudo access. The test will automatically skip if sudo is not available. The test has to be run explicitly thus: cd tests/qemu-iotests ./check -luks 149 Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-30block: move encryption deprecation warning into qcow codeDaniel P. Berrange
For a couple of releases we have been warning Encrypted images are deprecated Support for them will be removed in a future release. You can use 'qemu-img convert' to convert your image to an unencrypted one. This warning was issued by system emulators, qemu-img, qemu-nbd and qemu-io. Such a broad warning was issued because the original intention was to rip out all the code for dealing with encryption inside the QEMU block layer APIs. The new block encryption framework used for the LUKS driver does not rely on the unloved block layer API for encryption keys, instead using the QOM 'secret' object type. It is thus no longer appropriate to warn about encryption unconditionally. When the qcow/qcow2 drivers are converted to use the new encryption framework too, it will be practical to keep AES-CBC support present for use in qemu-img, qemu-io & qemu-nbd to allow for interoperability with older QEMU versions and liberation of data from existing encrypted qcow2 files. This change moves the warning out of the generic block code and into the qcow/qcow2 drivers. Further, the warning is set to only appear when running the system emulators, since qemu-img, qemu-io, qemu-nbd are expected to support qcow2 encryption long term now that the maint burden has been eliminated. Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-30block: add generic full disk encryption driverDaniel P. Berrange
Add a block driver that is capable of supporting any full disk encryption format. This utilizes the previously added block encryption code, and at this time supports the LUKS format. The driver code is capable of supporting any format supported by the QCryptoBlock module, so it registers one block driver for each format. This patch only registers the "luks" driver since the "qcow" driver is there only for back-compatibility with existing qcow built-in encryption. New LUKS compatible volumes can be formatted using qemu-img with defaults for all settings. $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0 demo.luks 10G Alternatively the cryptographic settings can be explicitly set $ qemu-img create --object secret,data=123456,id=sec0 \ -f luks -o key-secret=sec0,cipher-alg=aes-256,\ cipher-mode=cbc,ivgen-alg=plain64,hash-alg=sha256 \ demo.luks 10G And query its size $ qemu-img info demo.img image: demo.img file format: luks virtual size: 10G (10737418240 bytes) disk size: 132K encrypted: yes Note that it was not necessary to provide the password when querying info for the volume. The password is only required when performing I/O on the volume All volumes created by this new 'luks' driver should be capable of being opened by the kernel dm-crypt driver. The only algorithms listed in the LUKS spec that are not currently supported by this impl are sha512 and ripemd160 hashes and cast6 cipher. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> [ kwolf - Added #include to resolve conflict with da34e65c ] Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-30tests: add output filter to python I/O tests helperDaniel P. Berrange
Add a 'log' method to iotests.py which prints messages to stdout, with optional filtering of data. Port over some standard filters already present in the shell common.filter code to be usable in python too. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-30tests: refactor python I/O tests helper main methodDaniel P. Berrange
The iotests.py helper provides a main() method for running tests via the python unit test framework. Not all tests will want to use this, so refactor it to split the testing of compatible formats and platforms into separate helper methods Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-30tests: redirect stderr to stdout for iotestsDaniel P. Berrange
The python I/O tests helper for running qemu-img/qemu-io setup stdout to be captured to a pipe, but left stderr untouched. As a result, if something failed in qemu-img/ qemu-io, data written to stderr would get output directly and not line up with data on the test stdout due to buffering. If we explicitly redirect stderr to the same pipe as stdout, things are much clearer when they go wrong. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-30qemu-img/qemu-io: don't prompt for passwords if not requiredDaniel P. Berrange
The qemu-img/qemu-io tools prompt for disk encryption passwords regardless of whether any are actually required. Adding a check on bdrv_key_required() avoids this prompt for disk formats which have been converted to the QCryptoSecret APIs. This is just a temporary hack to ensure the block I/O tests continue to work after each patch, since the last patch will completely delete all the password prompting code. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-30block: add flag to indicate that no I/O will be performedDaniel P. Berrange
When opening an image it is useful to know whether the caller intends to perform I/O on the image or not. In the case of encrypted images this will allow the block driver to avoid having to prompt for decryption keys when we merely want to query header metadata about the image. eg qemu-img info This flag is enforced at the top level only, since even if we don't want todo I/O on the 'qcow2' file payload, the underlying 'file' driver will still need todo I/O to read the qcow2 header, for example. Reviewed-by: Eric Blake <eblake@redhat.com> Signed-off-by: Daniel P. Berrange <berrange@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-30block/qapi: Pass bdrv_query_blk_stats() s->statsMax Reitz
bdrv_query_blk_stats() does not need access to all of BlockStats, BlockDeviceStats is enough and is what this function is actually supposed to fill. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-30block/qapi: Set s->device in bdrv_query_stats()Max Reitz
This is the only instance of bdrv_query_blk_stats() accessing anything in the BlockStats structure other than s->stats, so let us move it to its caller (where it makes just as much sense) allowing us to make bdrv_query_blk_stats() take a pointer to the BlockDeviceStats instead of BlockStats. Signed-off-by: Max Reitz <mreitz@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-30block/qapi: fix unbounded stack for dump_qdictPeter Xu
Using heap instead of stack for better safety. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-30block/qapi: make two printf() formats literalPeter Xu
Fix two places to use literal printf format when possible. Signed-off-by: Peter Xu <peterx@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com> Reviewed-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-30block: Remove blk_set_bs()Kevin Wolf
The function is unused since commit f21d96d0 ('block: Use BdrvChild in BlockBackend'). Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-03-30block/raw-posix.c: Make physical devices usable in QEMU under Mac OS X hostProgrammingkid
Mac OS X can be picky when it comes to allowing the user to use physical devices in QEMU. Most mounted volumes appear to be off limits to QEMU. If an issue is detected, a message is displayed showing the user how to unmount a volume. Now QEMU uses both CD and DVD media. Signed-off-by: John Arbuckle <programmingkidx@gmail.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2016-03-30block: Reject writethrough mode except at the rootKevin Wolf
Writethrough mode is going to become a BlockBackend feature rather than a BDS one, so forbid it in places where we won't be able to support it when the code finally matches the envisioned design. We only allowed setting the cache mode of non-root nodes after the 2.5 release, so we're still free to make this change. The target of block jobs is now always opened in a writeback mode because it doesn't have a BlockBackend attached. This makes more sense anyway because block jobs know when to flush. If the graph is modified on job completion, the original cache mode moves to the new root, so for the guest device writethough always stays enabled if it was configured this way. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
2016-03-30block: Make backing files always writebackKevin Wolf
First of all, we're generally not writing to backing files, but when we do, it's in the context of block jobs which know very well when to flush the image. Signed-off-by: Kevin Wolf <kwolf@redhat.com> Reviewed-by: Eric Blake <eblake@redhat.com>
generated by cgit v1.2.3 (git 2.26.2) at 2025-02-22 19:29:47 +0000